X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/7d99e6a1f26e03dea6988a18bf950c428ff4b5aa..fc43746d1c5e5712585556ef55a73f2e46db476b:/test/runtest

diff --git a/test/runtest b/test/runtest
index 3e961ca98..0a95b70ec 100755
--- a/test/runtest
+++ b/test/runtest
@@ -14,11 +14,13 @@
 ###############################################################################
 
 #use strict;
-require Cwd;
 use Errno;
 use FileHandle;
 use Socket;
 use Time::Local;
+use Cwd;
+use File::Basename;
+use if $ENV{DEBUG} && $ENV{DEBUG} =~ /\bruntest\b/ => ('Smart::Comments' => '####');
 
 
 # Start by initializing some global variables
@@ -36,11 +38,15 @@ $gnutls_dh_bits_normal = 2236;
 $cf = "bin/cf -exact";
 $cr = "\r";
 $debug = 0;
+$flavour = 'FOO';
+$force_continue = 0;
 $force_update = 0;
+$log_failed_filename = "failed-summary.log";
 $more = "less -XF";
 $optargs = "";
 $save_output = 0;
 $server_opts = "";
+$valgrind = 0;
 
 $have_ipv4 = 1;
 $have_ipv6 = 1;
@@ -75,6 +81,13 @@ $parm_port_d2 = 1226;        # Additional for daemon
 $parm_port_d3 = 1227;        # Additional for daemon
 $parm_port_d4 = 1228;        # Additional for daemon
 
+# Manually set locale
+$ENV{'LC_ALL'} = 'C';
+
+# In some environments USER does not exists, but we
+# need it for some test(s)
+$ENV{USER} = getpwuid($>)
+  if not exists $ENV{USER};
 
 
 ###############################################################################
@@ -160,7 +173,7 @@ if (exists $TEST_STATE->{exim_pid})
   {
   $pid = $TEST_STATE->{exim_pid};
   print "Tidyup: killing wait-mode daemon pid=$pid\n";
-  system("sudo kill -SIGINT $pid");
+  system("sudo kill -INT $pid");
   }
 
 if (opendir(DIR, "spool"))
@@ -174,7 +187,7 @@ if (opendir(DIR, "spool"))
     chomp($pid = <PID>);
     close(PID);
     print "Tidyup: killing daemon pid=$pid\n";
-    system("sudo rm -f spool/$spool; sudo kill -SIGINT $pid");
+    system("sudo rm -f spool/$spool; sudo kill -INT $pid");
     }
   }
 else
@@ -188,7 +201,8 @@ close(T);
 system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
   if ($rc == 0 && !$save_output);
 
-system("sudo /bin/rm -rf ./eximdir/*");
+system("sudo /bin/rm -rf ./eximdir/*")
+  if (!$save_output);
 
 print "\nYou were in test $test at the end there.\n\n" if defined $test;
 exit $rc if ($rc >= 0);
@@ -310,9 +324,12 @@ return @yield;
 
 sub munge {
 my($file) = $_[0];
+my($extra) = $_[1];
 my($yield) = 0;
 my(@saved) = ();
 
+local $_;
+
 open(IN, "$file") || tests_exit(-1, "Failed to open $file: $!");
 
 my($is_log) = $file =~ /log/;
@@ -332,9 +349,16 @@ $spid = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx";
 # that are specific to certain file types, though there are also some of those
 # inline too.
 
-while(<IN>)
+LINE: while(<IN>)
   {
 RESET_AFTER_EXTRA_LINE_READ:
+  # Custom munges
+  if ($extra)
+    {
+    next if $extra =~ m%^/%  &&  eval $extra;
+    eval $extra if $extra =~ m/^s/;
+    }
+
   # Check for "*** truncated ***"
   $yield = 1 if /\*\*\* truncated \*\*\*/;
 
@@ -344,6 +368,9 @@ RESET_AFTER_EXTRA_LINE_READ:
   # But convert "name=the.local.host address=127.0.0.1" to use "localhost"
   s/name=the\.local\.host address=127\.0\.0\.1/name=localhost address=127.0.0.1/g;
 
+  # The name of the shell may vary
+  s/\s\Q$parm_shell\E\b/ ENV_SHELL/;
+
   # Replace the path to the testsuite directory
   s?\Q$parm_cwd\E?TESTSUITE?g;
 
@@ -391,18 +418,16 @@ RESET_AFTER_EXTRA_LINE_READ:
   # The message for a non-listening FIFO varies
   s/:[^:]+: while opening named pipe/: Error: while opening named pipe/;
 
-  # The name of the shell may vary
-  s/\s\Q$parm_shell\E\b/ SHELL/;
-
   # Debugging output of lists of hosts may have different sort keys
   s/sort=\S+/sort=xx/ if /^\S+ (?:\d+\.){3}\d+ mx=\S+ sort=\S+/;
 
   # Random local part in callout cache testing
   s/myhost.test.ex-\d+-testing/myhost.test.ex-dddddddd-testing/;
+  s/the.local.host.name-\d+-testing/the.local.host.name-dddddddd-testing/;
 
   # File descriptor numbers may vary
   s/^writing data block fd=\d+/writing data block fd=dddd/;
-  s/running as transport filter: write=\d+ read=\d+/running as transport filter: write=dddd read=dddd/;
+  s/(running as transport filter:) fd_write=\d+ fd_read=\d+/$1 fd_write=dddd fd_read=dddd/;
 
 
   # ======== Dumpdb output ========
@@ -471,20 +496,26 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
 
   # Time on queue tolerance
-  s/QT=1s/QT=0s/;
+  s/(QT|D)=1s/$1=0s/;
 
   # Eximstats heading
   s/Exim\sstatistics\sfrom\s\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\sto\s
     \d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Exim statistics from <time> to <time>/x;
 
+  # Treat ECONNRESET the same as ECONNREFUSED.  At least some systems give
+  # us the former on a new connection.
+  s/(could not connect to .*: Connection) reset by peer$/$1 refused/;
 
   # ======== TLS certificate algorithms ========
   # Test machines might have various different TLS library versions supporting
   # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
   # treat the standard algorithms the same.
   # So far, have seen:
+  #   TLSv1:AES128-GCM-SHA256:128
   #   TLSv1:AES256-SHA:256
+  #   TLSv1.1:AES256-SHA:256
   #   TLSv1.2:AES256-GCM-SHA384:256
+  #   TLSv1.2:DHE-RSA-AES256-SHA:256
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
   # We also need to handle the ciphersuite without the TLS part present, for
   # client-ssl's output.  We also see some older forced ciphersuites, but
@@ -492,10 +523,15 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Mail headers (...), log-lines X=..., client-ssl output ...
   # (and \b doesn't match between ' ' and '(' )
 
-  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.2:/$1TLSv1:/xg;
+  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
+  s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
+  s/\bAES128-GCM-SHA256\b/AES256-SHA/g;
   s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
+  s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
 
   # GnuTLS have seen:
+  #   TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
+  #   TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
   #   TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
   #
@@ -504,12 +540,29 @@ RESET_AFTER_EXTRA_LINE_READ:
   #   X=TLS1.1:RSA_AES_256_CBC_SHA1:256
   #   X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
   # and as stand-alone cipher:
+  #   ECDHE-RSA-AES256-SHA
   #   DHE-RSA-AES256-SHA256
   #   DHE-RSA-AES256-SHA
   # picking latter as canonical simply because regex easier that way.
   s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
-  s/TLS1.[012]:(DHE_)?RSA_AES_256_CBC_SHA(1|256):256/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
-  s/\bDHE-RSA-AES256-SHA256\b/DHE-RSA-AES256-SHA/g;
+  s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
+  s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+
+  # GnuTLS library error message changes
+  s/No certificate was found/The peer did not send any certificate/g;
+#(dodgy test?)  s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
+  s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+
+  # (this new one is a generic channel-read error, but the testsuite
+  # only hits it in one place)
+  s/TLS error on connection \(gnutls_handshake\): Error in the pull function\./a TLS session is required but an attempt to start TLS failed/g;
+
+  # (replace old with new, hoping that old only happens in one situation)
+  s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+  s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
+
+  # signature algorithm names
+  s/RSA-SHA1/RSA-SHA/;
 
 
   # ======== Caller's login, uid, gid, home, gecos ========
@@ -524,7 +577,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
   s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
 
-  s/\bname=$parm_caller_gecos\b/name=CALLER_GECOS/g;
+  s/\bname="?$parm_caller_gecos"?/name=CALLER_GECOS/g;
 
   # When looking at spool files with -Mvh, we will find not only the caller
   # login, but also the uid and gid. It seems that $) in some Perls gives all
@@ -600,6 +653,9 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/waiting for children of \d+/waiting for children of pppp/;
   s/waiting for (\S+) \(\d+\)/waiting for $1 (pppp)/;
 
+  # The spool header file name varies with PID
+  s%^(Writing spool header file: .*/hdr).[0-9]{1,5}%$1.pppp%;
+
   # ======== Port numbers ========
   # Incoming port numbers may vary, but not in daemon startup line.
 
@@ -661,6 +717,9 @@ RESET_AFTER_EXTRA_LINE_READ:
   # ======== Other error numbers ========
   s/errno=\d+/errno=dd/g;
 
+  # ======== System Error Messages ======
+  # depending on the underlaying file system the error message seems to differ
+  s/(?: is not a regular file)|(?: has too many links \(\d+\))/ not a regular file or too many links/;
 
   # ======== Output from ls ========
   # Different operating systems use different spacing on long output
@@ -689,8 +748,8 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/this message = \d+\b/this message = sss/;
   s/Size of headers = \d+/Size of headers = sss/;
   s/sum=(?!0)\d+/sum=dddd/;
-  s/(?<=sum=dddd )count=(?!0)\d+\b/count=dd/;
-  s/(?<=sum=0 )count=(?!0)\d+\b/count=dd/;
+  s/(?<=sum=dddd )count=\d+\b/count=dd/;
+  s/(?<=sum=0 )count=\d+\b/count=dd/;
   s/,S is \d+\b/,S is ddddd/;
   s/\+0100,\d+;/+0100,ddd;/;
   s/\(\d+ bytes written\)/(ddd bytes written)/;
@@ -715,7 +774,8 @@ RESET_AFTER_EXTRA_LINE_READ:
   # numbers, or handle specific bad conditions in different ways, leading to
   # different wording in the error messages, so we cannot compare them.
 
-  s/(TLS error on connection (?:from|to) .*? \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+  s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+  next if /SSL verify error: depth=0 error=certificate not trusted/;
 
   # ======== Maildir things ========
   # timestamp output in maildir processing
@@ -765,6 +825,10 @@ RESET_AFTER_EXTRA_LINE_READ:
   # other output is fragile; perhaps the debug output should be revised instead.
   s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
 
+  # ==========================================================
+  # MIME boundaries in RFC3461 DSN messages
+  s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
+
   # ==========================================================
   # Some munging is specific to the specific file types
 
@@ -793,6 +857,16 @@ RESET_AFTER_EXTRA_LINE_READ:
         next;
         }
       }
+
+    # openssl version variances
+    next if /^SSL info: unknown state/;
+    next if /^SSL info: SSLv2\/v3 write client hello A/;
+    next if /^SSL info: SSLv3 read server key exchange A/;
+    next if /SSL verify error: depth=0 error=certificate not trusted/;
+    s/SSL3_READ_BYTES/ssl3_read_bytes/;
+
+    # gnutls version variances
+    next if /^Error in the pull function./;
     }
 
   # ======== stderr ========
@@ -810,7 +884,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.
 
-    s/\bgethostbyname2?|\bgetipnodebyname/get[host|ipnode]byname[2]/;
+    s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
 
     # drop gnutls version strings
     next if /GnuTLS compile-time version: \d+[\.\d]+$/;
@@ -847,7 +921,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     # As of Exim 4.74, we log when a setgid fails; because we invoke Exim
     # with -be, privileges will have been dropped, so this will always
     # be the case
-    next if /^changing group to \d+ failed: Operation not permitted/;
+    next if /^changing group to \d+ failed: (Operation not permitted|Not owner)/;
 
     # We might not keep this check; rather than change all the tests, just
     # ignore it as long as it succeeds; then we only need to change the
@@ -888,7 +962,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     # are unset, because tls ain't always there.
 
     next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
-                \sno\s\(option\sunset\)/x;
+                \sno\s\((option\sunset|end\sof\slist)\)/x;
 
     # Skip auxiliary group lists because they will vary.
 
@@ -933,6 +1007,23 @@ RESET_AFTER_EXTRA_LINE_READ:
       while (<IN>) { last if !/^\s/; }
       }
 
+    # remote port numbers vary
+    s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
+
+    # Skip hosts_require_dane checks when the options
+    # are unset, because dane ain't always there.
+
+    next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+
+    # SUPPORT_PROXY
+    next if /host in hosts_proxy\?/;
+
+    # Experimental_International
+    next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
+
+    # Environment cleaning
+    next if /\w+ in keep_environment\? (yes|no)/;
+
     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
     # of the files that are obtained using readdir() varies from system to
@@ -970,11 +1061,21 @@ RESET_AFTER_EXTRA_LINE_READ:
                 /^Fixed never_users:/ ||
                 /^Size of off_t:/
                 );
+
+
       }
 
     next;
     }
 
+  # ======== log ========
+
+  elsif ($is_log)
+    {
+    # Berkeley DB version differences
+    next if / Berkeley DB error: /;
+    }
+
   # ======== All files other than stderr ========
 
   print MUNGED;
@@ -993,16 +1094,43 @@ return $yield;
 
 # Arguments: [0] the prompt string
 #            [1] if there is a U in the prompt and $force_update is true
-# Returns:   nothing (it sets $_)
+#            [2] if there is a C in the prompt and $force_continue is true
+# Returns:   returns the answer
 
 sub interact{
 print $_[0];
 if ($_[1]) { $_ = "u"; print "... update forced\n"; }
+  elsif ($_[2]) { $_ = "c"; print "... continue forced\n"; }
   else { $_ = <T>; }
 }
 
 
 
+##################################################
+#    Subroutine to log in force_continue mode    #
+##################################################
+
+# In force_continue mode, we just want a terse output to a statically
+# named logfile.  If multiple files in same batch (stdout, stderr, etc)
+# all have mismatches, it will log multiple times.
+#
+# Arguments: [0] the logfile to append to
+#            [1] the testno that failed
+# Returns:   nothing
+
+
+
+sub log_failure {
+  my $logfile = shift();
+  my $testno  = shift();
+  my $detail  = shift() || '';
+  if ( open(my $fh, ">>", $logfile) ) {
+    print $fh "Test $testno $detail failed\n";
+    close $fh;
+  }
+}
+
+
 
 ##################################################
 #    Subroutine to compare one output file       #
@@ -1017,6 +1145,7 @@ if ($_[1]) { $_ = "u"; print "... update forced\n"; }
 #             [2] where to put the munged copy
 #             [3] the name of the saved file
 #             [4] TRUE if this is a log file whose deliveries must be sorted
+#             [5] optionally, a custom munge command
 #
 # Returns:    0 comparison succeeded or differences to be ignored
 #             1 comparison failed; files may have been updated (=> re-compare)
@@ -1024,12 +1153,18 @@ if ($_[1]) { $_ = "u"; print "... update forced\n"; }
 # Does not return if the user replies "Q" to a prompt.
 
 sub check_file{
-my($rf,$rsf,$mf,$sf,$sortfile) = @_;
+my($rf,$rsf,$mf,$sf,$sortfile,$extra) = @_;
 
 # If there is no saved file, the raw files must either not exist, or be
 # empty. The test ! -s is TRUE if the file does not exist or is empty.
 
-if (! -e $sf)
+# we check if there is a flavour specific file, but we remember
+# the original file name as "generic"
+$sf_generic = $sf;
+$sf_flavour = "$sf_generic.$flavour";
+$sf_current = -e $sf_flavour ? $sf_flavour : $sf_generic;
+
+if (! -e $sf_current)
   {
   return 0 if (! -s $rf && (! defined $rsf || ! -s $rsf));
 
@@ -1040,8 +1175,9 @@ if (! -e $sf)
   for (;;)
     {
     print "Continue, Show, or Quit? [Q] ";
-    $_ = <T>;
+    $_ = $force_continue ? "c" : <T>;
     tests_exit(1) if /^q?$/i;
+    log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
     return 0 if /^c$/i;
     last if (/^s$/);
     }
@@ -1060,23 +1196,26 @@ if (! -e $sf)
   print "\n";
   for (;;)
     {
-    interact("Continue, Update & retry, Quit? [Q] ", $force_update);
+    interact("Continue, Update & retry, Quit? [Q] ", $force_update, $force_continue);
     tests_exit(1) if /^q?$/i;
+    log_failure($log_failed_filename, $testno, $rsf) if (/^c$/i && $force_continue);
     return 0 if /^c$/i;
     last if (/^u$/i);
     }
   }
 
+#### $_
+
 # Control reaches here if either (a) there is a saved file ($sf), or (b) there
 # was a request to create a saved file. First, create the munged file from any
 # data that does exist.
 
 open(MUNGED, ">$mf") || tests_exit(-1, "Failed to open $mf: $!");
-my($truncated) = munge($rf) if -e $rf;
+my($truncated) = munge($rf, $extra) if -e $rf;
 if (defined $rsf && -e $rsf)
   {
   print MUNGED "\n******** SERVER ********\n";
-  $truncated |= munge($rsf);
+  $truncated |= munge($rsf, $extra);
   }
 close(MUNGED);
 
@@ -1094,7 +1233,7 @@ close(MUNGED);
 # a result of parallel deliveries. We load the munged file and sort sequences
 # of delivery lines.
 
-if (-e $sf)
+if (-e $sf_current)
   {
   # Deal with truncated text items
 
@@ -1105,7 +1244,7 @@ if (-e $sf)
     open(MUNGED, "$mf") || tests_exit(-1, "Failed to open $mf: $!");
     @munged = <MUNGED>;
     close(MUNGED);
-    open(SAVED, "$sf") || tests_exit(-1, "Failed to open $sf: $!");
+    open(SAVED, $sf_current) || tests_exit(-1, "Failed to open $sf_current: $!");
     @saved = <SAVED>;
     close(SAVED);
 
@@ -1167,77 +1306,172 @@ if (-e $sf)
 
   # Do the comparison
 
-  return 0 if (system("$cf '$mf' '$sf' >test-cf") == 0);
+  return 0 if (system("$cf '$mf' '$sf_current' >test-cf") == 0);
 
   # Handle comparison failure
 
-  print "** Comparison of $mf with $sf failed";
+  print "** Comparison of $mf with $sf_current failed";
   system("$more test-cf");
 
   print "\n";
   for (;;)
     {
-    interact("Continue, Retry, Update & retry, Quit? [Q] ", $force_update);
+    interact("Continue, Retry, Update current"
+	. ($sf_current ne $sf_flavour  ? "/Save for flavour '$flavour'" : "")
+	. " & retry, Quit? [Q] ", $force_update, $force_continue);
     tests_exit(1) if /^q?$/i;
+    log_failure($log_failed_filename, $testno, $sf_current) if (/^c$/i && $force_continue);
     return 0 if /^c$/i;
     return 1 if /^r$/i;
-    last if (/^u$/i);
+    last if (/^[us]$/i);
     }
   }
 
 # Update or delete the saved file, and give the appropriate return code.
 
 if (-s $mf)
-  { tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0; }
+  {
+	my $sf = /^u/i ? $sf_current : $sf_flavour;
+		tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0;
+  }
 else
-  { tests_exit(-1, "Failed to unlink $sf") if !unlink($sf); }
+  {
+	# if we deal with a flavour file, we can't delete it, because next time the generic
+	# file would be used again
+	if ($sf_current eq $sf_flavour) {
+		open(FOO, ">$sf_current");
+		close(FOO);
+	}
+	else {
+		tests_exit(-1, "Failed to unlink $sf_current") if !unlink($sf_current);
+	}
+  }
 
 return 1;
 }
 
 
 
+##################################################
+# Custom munges
+# keyed by name of munge; value is a ref to a hash
+# which is keyed by file, value a string to look for.
+# Usable files are:
+#  paniclog, rejectlog, mainlog, stdout, stderr, msglog, mail
+# Search strings starting with 's' do substitutions;
+# with '/' do line-skips.
+# Triggered by a scriptfile line "munge <name>"
+##################################################
+$munges =
+  { 'dnssec' =>
+    { 'stderr' => '/^Reverse DNS security status: unverified\n/' },
+
+    'gnutls_unexpected' =>
+    { 'mainlog' => '/\(recv\): A TLS packet with unexpected length was received./' },
+
+    'gnutls_handshake' =>
+    { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/' },
+
+    'optional_events' =>
+    { 'stdout' => '/event_action =/' },
+
+    'optional_ocsp' =>
+    { 'stderr' => '/127.0.0.1 in hosts_requ(ire|est)_ocsp/' },
+
+    'optional_cert_hostnames' =>
+    { 'stderr' => '/in tls_verify_cert_hostnames\? no/' },
+
+    'loopback' =>
+    { 'stdout' => 's/[[](127\.0\.0\.1|::1)]/[IP_LOOPBACK_ADDR]/' },
+
+    'scanfile_size' =>
+    { 'stdout' => 's/(Content-length:) \d\d\d/$1 ddd/' },
+
+    'delay_1500' =>
+    { 'stderr' => 's/(1[5-9]|23\d)\d\d msec/ssss msec/' },
+
+    'tls_anycipher' =>
+    { 'mainlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /' },
+
+    'debug_pid' =>
+    { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d{1,5}/ppppp/g' },
+
+    'optional_dsn_info' =>
+    { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
+    },
+
+    'optional_config' =>
+    { 'stdout' => '/^(
+                  dkim_(canon|domain|private_key|selector|sign_headers|strict)
+                  |gnutls_require_(kx|mac|protocols)
+                  |hosts_(requ(est|ire)|try)_(dane|ocsp)
+                  |hosts_(avoid|nopass|require|verify_avoid)_tls
+                  |socks_proxy
+                  |tls_[^ ]*
+                  )($|[ ]=)/x' },
+
+    'sys_bindir' =>
+    { 'mainlog' => 's%/(usr/)?bin/%SYSBINDIR/%' },
+
+    'sync_check_data' =>
+    { 'mainlog'   => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/',
+      'rejectlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/'},
+
+    'debuglog_stdout' =>
+    { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //;
+                  s/Process \d+ is ready for new message/Process pppp is ready for new message/'
+    },
+  };
+
+
 ##################################################
 #    Subroutine to check the output of a test    #
 ##################################################
 
 # This function is called when the series of subtests is complete. It makes
-# use of check() file, whose arguments are:
+# use of check_file(), whose arguments are:
 #
 #  [0] the name of the main raw output file
 #  [1] the name of the server raw output file or undef
 #  [2] where to put the munged copy
 #  [3] the name of the saved file
 #  [4] TRUE if this is a log file whose deliveries must be sorted
+#  [5] an optional custom munge command
 #
-# Arguments: none
+# Arguments: Optionally, name of a single custom munge to run.
 # Returns:   0 if the output compared equal
 #            1 if re-run needed (files may have been updated)
 
 sub check_output{
+my($mungename) = $_[0];
 my($yield) = 0;
+my($munge) = $munges->{$mungename} if defined $mungename;
 
 $yield = 1 if check_file("spool/log/paniclog",
                        "spool/log/serverpaniclog",
                        "test-paniclog-munged",
-                       "paniclog/$testno", 0);
+                       "paniclog/$testno", 0,
+		       $munge->{'paniclog'});
 
 $yield = 1 if check_file("spool/log/rejectlog",
                        "spool/log/serverrejectlog",
                        "test-rejectlog-munged",
-                       "rejectlog/$testno", 0);
+                       "rejectlog/$testno", 0,
+		       $munge->{'rejectlog'});
 
 $yield = 1 if check_file("spool/log/mainlog",
                        "spool/log/servermainlog",
                        "test-mainlog-munged",
-                       "log/$testno", $sortlog);
+                       "log/$testno", $sortlog,
+		       $munge->{'mainlog'});
 
 if (!$stdout_skip)
   {
   $yield = 1 if check_file("test-stdout",
                        "test-stdout-server",
                        "test-stdout-munged",
-                       "stdout/$testno", 0);
+                       "stdout/$testno", 0,
+		       $munge->{'stdout'});
   }
 
 if (!$stderr_skip)
@@ -1245,7 +1479,8 @@ if (!$stderr_skip)
   $yield = 1 if check_file("test-stderr",
                        "test-stderr-server",
                        "test-stderr-munged",
-                       "stderr/$testno", 0);
+                       "stderr/$testno", 0,
+		       $munge->{'stderr'});
   }
 
 # Compare any delivered messages, unless this test is skipped.
@@ -1284,7 +1519,8 @@ if (! $message_skip)
 
     print ">> COMPARE $mail mail/$testno.$saved_mail\n" if $debug;
     $yield = 1 if check_file($mail, undef, "test-mail-munged",
-      "mail/$testno.$saved_mail", 0);
+      "mail/$testno.$saved_mail", 0,
+      $munge->{'mail'});
     delete $expected_mails{"mail/$testno.$saved_mail"};
     }
 
@@ -1297,8 +1533,9 @@ if (! $message_skip)
 
     for (;;)
       {
-      interact("Continue, Update & retry, or Quit? [Q] ", $force_update);
+      interact("Continue, Update & retry, or Quit? [Q] ", $force_update, $force_continue);
       tests_exit(1) if /^q?$/i;
+      log_failure($log_failed_filename, $testno, "missing email") if (/^c$/i && $force_continue);
       last if /^c$/i;
 
       # For update, we not only have to unlink the file, but we must also
@@ -1354,7 +1591,8 @@ if (! $msglog_skip)
         s/((?:[^\W_]{6}-){2}[^\W_]{2})
           /new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
       $yield = 1 if check_file("spool/msglog/$msglog", undef,
-        "test-msglog-munged", "msglog/$testno.$munged_msglog", 0);
+        "test-msglog-munged", "msglog/$testno.$munged_msglog", 0,
+        $munge->{'msglog'});
       delete $expected_msglogs{"$testno.$munged_msglog"};
       }
     }
@@ -1379,8 +1617,9 @@ if (! $msglog_skip)
 
     for (;;)
       {
-      interact("Continue, Update, or Quit? [Q] ", $force_update);
+      interact("Continue, Update, or Quit? [Q] ", $force_update, $force_continue);
       tests_exit(1) if /^q?$/i;
+      log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/i && $force_continue);
       last if /^c$/i;
       if (/^u$/i)
         {
@@ -1448,6 +1687,7 @@ system("$cmd");
 #            4 EOF was encountered after an initial return code line
 # Optionally alse a second parameter, a hash-ref, with auxilliary information:
 #            exim_pid: pid of a run process
+#            munge: name of a post-script results munger
 
 sub run_command{
 my($testno) = $_[0];
@@ -1456,6 +1696,8 @@ my($commandnameref) = $_[3];
 my($aux_info) = $_[4];
 my($yield) = 1;
 
+our %ENV = map { $_ => $ENV{$_} } grep { /^(?:USER|SHELL|PATH|TERM|EXIM_TEST_.*)$/ } keys %ENV;
+
 if (/^(\d+)\s*$/)                # Handle unusual return code
   {
   my($r) = $_[2];
@@ -1525,19 +1767,42 @@ if (/^dump\s+(\S+)/)
   my(@temp);
   print ">> ./eximdir/exim_dumpdb $parm_cwd/spool $which\n" if $debug;
   open(IN, "./eximdir/exim_dumpdb $parm_cwd/spool $which |");
-  @temp = <IN>;
-  close(IN);
-  if ($which eq "callout")
+  open(OUT, ">>test-stdout");
+  print OUT "+++++++++++++++++++++++++++\n";
+
+  if ($which eq "retry")
     {
+    $/ = "\n  ";
+    @temp = <IN>;
+    $/ = "\n";
+
     @temp = sort {
-                 my($aa) = substr $a, 21;
-                 my($bb) = substr $b, 21;
-                 return $aa cmp $bb;
+                   my($aa) = split(' ', $a);
+                   my($bb) = split(' ', $b);
+                   return $aa cmp $bb;
                  } @temp;
+
+    foreach $item (@temp)
+      {
+      $item =~ s/^\s*(.*)\n(.*)\n?\s*$/$1\n$2/m;
+      print OUT "  $item\n";
+      }
     }
-  open(OUT, ">>test-stdout");
-  print OUT "+++++++++++++++++++++++++++\n";
-  print OUT @temp;
+  else
+    {
+    @temp = <IN>;
+    if ($which eq "callout")
+      {
+      @temp = sort {
+                   my($aa) = substr $a, 21;
+                   my($bb) = substr $b, 21;
+                   return $aa cmp $bb;
+                   } @temp;
+      }
+    print OUT @temp;
+    }
+
+  close(IN);
   close(OUT);
   return 1;
   }
@@ -1633,14 +1898,14 @@ if (/^killdaemon/)
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {
-      run_system("sudo /bin/kill -SIGINT $pid");
+      run_system("sudo /bin/kill -INT $pid");
       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {
-      run_system("sudo /bin/kill -SIGINT $pid");
+      run_system("sudo /bin/kill -INT $pid");
       close DAEMONCMD;                                   # Waits for process
       }
     }
@@ -1660,6 +1925,18 @@ elsif (/^millisleep\s+(.*)$/)
   }
 
 
+# The "munge" command selects one of a hardwired set of test-result modifications
+# to be made before result compares are run agains the golden set.  This lets
+# us account for test-system dependent things which only affect a few, but known,
+# test-cases.
+# Currently only the last munge takes effect.
+
+if (/^munge\s+(.*)$/)
+  {
+  return (0, { munge => $1 });
+  }
+
+
 # The "sleep" command does just that. For sleeps longer than 1 second we
 # tell the user what's going on.
 
@@ -1686,7 +1963,7 @@ if (/^sleep\s+(.*)$/)
 # Various Unix management commands are recognized
 
 if (/^(ln|ls|du|mkdir|mkfifo|touch|cp|cat)\s/ ||
-    /^sudo (rmdir|rm|chown|chmod)\s/)
+    /^sudo\s(rmdir|rm|chown|chmod)\s/)
   {
   run_system("$_ >>test-stdout 2>>test-stderr");
   return 1;
@@ -1707,10 +1984,12 @@ if (/^(ln|ls|du|mkdir|mkfifo|touch|cp|cat)\s/ ||
 # command, triggered by $server_pid being non-zero. The server sends its output
 # to a different file. The variable $server_opts, if not empty, contains
 # options to disable IPv4 or IPv6 if necessary.
+# This works because "server" swallows its stdin before waiting for a connection.
 
 if (/^server\s+(.*)$/)
   {
-  $cmd = "./bin/server $server_opts $1 >>test-stdout-server";
+  $pidfile = "$parm_cwd/aux-var/server-daemon.pid";
+  $cmd = "./bin/server $server_opts -oP $pidfile $1 >>test-stdout-server";
   print ">> $cmd\n" if ($debug);
   $server_pid = open SERVERCMD, "|$cmd" || tests_exit(-1, "Failed to run $cmd");
   SERVERCMD->autoflush(1);
@@ -1724,10 +2003,9 @@ if (/^server\s+(.*)$/)
   print SERVERCMD "++++\n"; # Send end to server; can't send EOF yet
                             # because close() waits for the process.
 
-  # This gives the server time to get started; otherwise the next
+  # Interlock the server startup; otherwise the next
   # process may not find it there when it expects it.
-
-  select(undef, undef, undef, 0.5);
+  while (! stat("$pidfile") ) { select(undef, undef, undef, 0.3); }
   return 3;
   }
 
@@ -1824,12 +2102,12 @@ if (/^client/ || /^(sudo\s+)?perl\b/)
 # not drop privilege when -C and -D options are present. To run the exim
 # command as root, we use sudo.
 
-elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
+elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+)?\s+(.*)$/)
   {
-  $args = $5;
+  $args = $6;
   my($envset) = (defined $1)? $1      : "";
-  my($sudo)   = (defined $3)? "sudo " : "";
-  my($special)= (defined $4)? $4      : "";
+  my($sudo)   = (defined $3)? "sudo " . (defined $4 ? "-u $4 ":"")  : "";
+  my($special)= (defined $5)? $5      : "";
   $wait_time  = (defined $2)? $2      : 0;
 
   # Return 2 rather than 1 afterwards
@@ -1875,7 +2153,8 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
     for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
     if ( $args =~ /\$msg\d/ )
       {
-      tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n");
+      tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
+        unless $force_continue;
       }
     }
 
@@ -1884,11 +2163,13 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
 
   $args =~ s/(?:^|\s)-d\S*// if $optargs =~ /(?:^|\s)-d/;
 
-  $cmd = "$envset$sudo$parm_cwd/eximdir/exim$special$optargs " .
+  my $opt_valgrind = $valgrind ? "valgrind --leak-check=yes --suppressions=$parm_cwd/aux-fixed/valgrind.supp " : "";
+
+  $cmd = "$envset$sudo$opt_valgrind" .
+         "$parm_cwd/eximdir/exim$special$optargs " .
          "-DEXIM_PATH=$parm_cwd/eximdir/exim$special " .
          "-C $parm_cwd/test-config $args " .
          ">>test-stdout 2>>test-stderr";
-
   # If the command is starting an Exim daemon, we run it in the same
   # way as the "server" command above, that is, we don't want to wait
   # for the process to finish. That happens when "killdaemon" is obeyed later
@@ -1902,6 +2183,7 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
 
   if ($cmd =~ /\s-DSERVER=server\s/ && $cmd !~ /\s-DNOTDAEMON\s/)
     {
+    $pidfile = "$parm_cwd/spool/exim-daemon.pid";
     if ($debug) { printf ">> daemon: $cmd\n"; }
     run_system("sudo mkdir spool/log 2>/dev/null");
     run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
@@ -1912,12 +2194,23 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
     # file is written to the spool directory, in case the Exim binary was
     # built with PID_FILE_PATH pointing somewhere else.
 
-    $cmd =~ s!\s-bd\s! -bdf -oP $parm_cwd/spool/exim-daemon.pid !;
+    if ($cmd =~ /\s-oP\s/)
+      {
+      ($pidfile = $cmd) =~ s/^.*-oP ([^ ]+).*$/$1/;
+      $cmd =~ s!\s-bd\s! -bdf !;
+      }
+    else
+      {
+      $pidfile = "$parm_cwd/spool/exim-daemon.pid";
+      $cmd =~ s!\s-bd\s! -bdf -oP $pidfile !;
+      }
     print ">> |${cmd}-server\n" if ($debug);
     open DAEMONCMD, "|${cmd}-server" || tests_exit(-1, "Failed to run $cmd");
     DAEMONCMD->autoflush(1);
     while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; }   # Ignore any input
-    select(undef, undef, undef, 0.3);             # Let the daemon get going
+
+    # Interlock with daemon startup
+    while (! stat("$pidfile") ) { select(undef, undef, undef, 0.3); }
     return 3;                                     # Don't wait
     }
   elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
@@ -1954,6 +2247,45 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
     }
   }
 
+# The "background" command is run but not waited-for, like exim -DSERVER=server.
+# One script line is read and fork-exec'd.  The PID is stored for a later
+# killdaemon.
+
+elsif (/^background$/)
+  {
+  my $line;
+#  $pidfile = "$parm_cwd/aux-var/server-daemon.pid";
+
+  $_ = <SCRIPT>; $lineno++;
+  chomp;
+  $line = $_;
+  if ($debug) { printf ">> daemon: $line >>test-stdout 2>>test-stderr\n"; }
+
+  my $pid = fork();
+  if (not defined $pid) { die "** fork failed: $!\n" }
+  if (not $pid) {
+    print "[$$]>> ${line}\n" if ($debug);
+    close(STDIN);
+    open(STDIN, "<", "test-stdout");
+    close(STDOUT);
+    open(STDOUT, ">>", "test-stdout");
+    close(STDERR);
+    open(STDERR, ">>", "test-stderr-server");
+    exec "exec ${line}";
+    exit(1);
+  }
+
+#  open(my $fh, ">", $pidfile) ||
+#      tests_exit(-1, "Failed to open $pidfile: $!");
+#  printf($fh, "%d\n", $pid);
+#  close($fh);
+
+  while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; }   # Ignore any input
+  select(undef, undef, undef, 0.3);             # Let the daemon get going
+  return (3, { exim_pid => $pid });             # Don't wait
+  }
+
+
 
 # Unknown command
 
@@ -2013,6 +2345,15 @@ return $yield;            # Ran command and waited
 autoflush STDOUT 1;
 print "Exim tester $testversion\n";
 
+# extend the PATH with .../sbin
+# we map all (.../bin) to (.../sbin:.../bin)
+$ENV{PATH} = do {
+  my %seen = map { $_, 1 } split /:/, $ENV{PATH};
+  join ':' => map { m{(.*)/bin$} 
+                ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_) 
+                : ($_) } 
+      split /:/, $ENV{PATH};
+};
 
 ##################################################
 #      Some tests check created file modes       #
@@ -2050,9 +2391,10 @@ else
 ##################################################
 
 # If the first character of the first argument is '/', the argument is taken
-# as the path to the binary.
+# as the path to the binary. If the first argument does not start with a
+# '/' but exists in the file system, it's assumed to be the Exim binary.
 
-$parm_exim = (@ARGV > 0 && $ARGV[0] =~ m?^/?)? shift @ARGV : "";
+$parm_exim = (@ARGV > 0 && (-x $ARGV[0] or $ARGV[0] =~ m?^/?))? Cwd::abs_path(shift @ARGV) : "";
 print "Exim binary is $parm_exim\n" if $parm_exim ne "";
 
 
@@ -2072,10 +2414,15 @@ while (@ARGV > 0 && $ARGV[0] =~ /^-/)
     {
     if ($arg eq "-DEBUG")  { $debug = 1; $cr = "\n"; next; }
     if ($arg eq "-DIFF")   { $cf = "diff -u"; next; }
+    if ($arg eq "-CONTINUE"){$force_continue = 1;
+                             $more = "cat";
+                             next; }
     if ($arg eq "-UPDATE") { $force_update = 1; next; }
     if ($arg eq "-NOIPV4") { $have_ipv4 = 0; next; }
     if ($arg eq "-NOIPV6") { $have_ipv6 = 0; next; }
     if ($arg eq "-KEEP")   { $save_output = 1; next; }
+    if ($arg eq "-VALGRIND")   { $valgrind = 1; next; }
+    if ($arg =~ /^-FLAVOU?R$/) { $flavour = shift; next; }
     }
   $optargs .= " $arg";
   }
@@ -2128,7 +2475,7 @@ if ($parm_exim eq "")
     # directory. Thus, we should choose the highest version of Exim that has
     # been compiled.
 
-    if ($f eq "exim4" || $f eq "exim-snapshot")
+    if ($f eq "exim4" || $f eq "exim-snapshot" || $f eq 'src')
       { $srcdir = $f; }
     else
       { $srcdir = $f
@@ -2194,17 +2541,24 @@ if ($parm_exim eq "")
 
 # deal with TRUSTED_CONFIG_LIST restrictions
 unlink("$parm_cwd/test-config") if -e "$parm_cwd/test-config";
-symlink("$parm_cwd/confs/0000", "$parm_cwd/test-config")
-  or die "Unable to link initial config into place: $!\n";
+open (IN, "$parm_cwd/confs/0000") ||
+  tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
+open (OUT, ">test-config") ||
+  tests_exit(-1, "Couldn't open test-config: $!\n");
+while (<IN>) { print OUT; }
+close(IN);
+close(OUT);
 
 print("Probing with config file: $parm_cwd/test-config\n");
 open(EXIMINFO, "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd " .
-               "-bP exim_user exim_group|") ||
+               "-bP exim_user exim_group 2>&1|") ||
   die "** Cannot run $parm_exim: $!\n";
 while(<EXIMINFO>)
   {
   $parm_eximuser = $1 if /^exim_user = (.*)$/;
   $parm_eximgroup = $1 if /^exim_group = (.*)$/;
+  $parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
+  print "$_" if /wrong owner/;
   }
 close(EXIMINFO);
 
@@ -2227,7 +2581,35 @@ if (defined $parm_eximgroup)
     else { $parm_exim_gid = getgrnam($parm_eximgroup); }
   }
 
-open(EXIMINFO, "$parm_exim -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
+# check the permissions on the TRUSTED_CONFIG_LIST
+if (defined $parm_trusted_config_list)
+  {
+  die "TRUSTED_CONFIG_LIST: $parm_trusted_config_list: $!\n"
+    if not -f $parm_trusted_config_list;
+
+  die "TRUSTED_CONFIG_LIST $parm_trusted_config_list must not be world writable!\n"
+    if 02 & (stat _)[2];
+
+  die sprintf "TRUSTED_CONFIG_LIST: $parm_trusted_config_list %d is group writable, but not owned by group '%s' or '%s'.\n",
+  (stat _)[1],
+    scalar(getgrgid 0), scalar(getgrgid $>)
+    if (020 & (stat _)[2]) and not ((stat _)[5] == $> or (stat _)[5] == 0);
+
+  die sprintf "TRUSTED_CONFIG_LIST: $parm_trusted_config_list is not owned by user '%s' or '%s'.\n",
+  scalar(getpwuid 0), scalar(getpwuid $>)
+     if (not (-o _ or (stat _)[4] == 0));
+
+  open(TCL, $parm_trusted_config_list) or die "Can't open $parm_trusted_config_list: $!\n";
+  my $test_config = getcwd() . '/test-config';
+  die "Can't find '$test_config' in TRUSTED_CONFIG_LIST $parm_trusted_config_list."
+  if not grep { /^$test_config$/ } <TCL>;
+  }
+else
+  {
+  die "Unable to check the TRUSTED_CONFIG_LIST, seems to be empty?\n";
+  }
+
+open(EXIMINFO, "$parm_exim -d-all+transport -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
   die "** Cannot run $parm_exim: $!\n";
 
 print "-" x 78, "\n";
@@ -2236,7 +2618,7 @@ while (<EXIMINFO>)
   {
   my(@temp);
 
-  if (/^Exim version/) { print; }
+  if (/^(Exim|Library) version/) { print; }
 
   elsif (/^Size of off_t: (\d+)/)
     {
@@ -2505,6 +2887,22 @@ if (defined $parm_support{'Content_Scanning'})
   }
 
 
+##################################################
+#       Check for redis                          #
+##################################################
+if (defined $parm_lookups{'redis'})
+  {
+  if (system("redis-server -v 2>/dev/null >/dev/null") == 0)
+    {
+    print "The redis-server command works\n";
+    $parm_running{'redis'} = ' ';
+    }
+  else
+    {
+    print "The redis-server command failed: assume Redis not installed\n";
+    }
+  }
+
 ##################################################
 #         Test for the basic requirements        #
 ##################################################
@@ -2585,7 +2983,7 @@ $pwcomm = $pwcomm;
 
 $parm_caller_group = getgrgid($parm_caller_gid);
 
-print "Program caller is $parm_caller, whose group is $parm_caller_group\n";
+print "Program caller is $parm_caller ($parm_caller_uid), whose group is $parm_caller_group ($parm_caller_gid)\n";
 print "Home directory is $parm_caller_home\n";
 
 unless (defined $parm_eximgroup)
@@ -2623,7 +3021,7 @@ while (($parm_ipv4 eq "" || $parm_ipv6 eq "") && ($_ = <IFCONFIG>))
       $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
     {
     $ip = $1;
-    next if ($ip eq "127.0.0.1");
+    next if ($ip =~ /^127\./ || $ip =~ /^10\./);
     $parm_ipv4 = $ip;
     }
 
@@ -2728,9 +3126,6 @@ if ($parm_hostname =~ /[[:upper:]]/)
   print "\n*** Host name has upper case characters: this may cause problems ***\n\n";
   }
 
-# Find the user's shell
-
-$parm_shell = $ENV{'SHELL'};
 
 
 ##################################################
@@ -2842,6 +3237,11 @@ if ($parm_caller_uid eq $parm_exim_uid) {
   tests_exit(-1, "Exim user ($parm_eximuser,$parm_exim_uid) cannot be "
                 ."the same as caller ($parm_caller,$parm_caller_uid)");
 }
+if ($parm_caller_gid eq $parm_exim_gid) {
+  tests_exit(-1, "Exim group ($parm_eximgroup,$parm_exim_gid) cannot be "
+                ."the same as caller's ($parm_caller) group as it confuses "
+                ."results analysis");
+}
 
 print "The Exim user needs access to the test suite directory. Checking ...";
 
@@ -2877,7 +3277,7 @@ else
 # because the current binary does not support the right facilities, and also
 # those that are outside the numerical range selected.
 
-print "\nTest range is $test_start to $test_end\n";
+print "\nTest range is $test_start to $test_end (flavour $flavour)\n";
 print "Omitting \${dlfunc expansion tests (loadable module not present)\n"
   if $dlfunc_deleted;
 print "Omitting dbm tests (unable to copy exim_dbmbuild)\n"
@@ -2983,7 +3383,7 @@ for ($i = 0; $i < @test_dirs; $i++)
 
   foreach $test (@testlist)
     {
-    next if $test !~ /^\d{4}$/;
+    next if $test !~ /^\d{4}(?:\.\d+)?$/;
     next if $test < $test_start || $test > $test_end;
     push @test_list, "$testdir/$test";
     }
@@ -3051,6 +3451,10 @@ foreach $basedir ("aux-var", "dnszones")
     }
   }
 
+# Set a user's shell, distinguishable from /bin/sh
+
+symlink("/bin/sh","aux-var/sh");
+$ENV{'SHELL'} = $parm_shell = $parm_cwd . "/aux-var/sh";
 
 ##################################################
 #     Create fake DNS zones for this host        #
@@ -3098,6 +3502,8 @@ if ($have_ipv6 && $parm_ipv6 ne "::1")
     $exp_v6 = $1 . ':0' x (8-length($exp_v6)) . ':' . $2;
   } elsif ( $parm_ipv6 =~ /^::(.+[^:])$/ ) {
     $exp_v6 = '0:' x (9-length($exp_v6)) . $1;
+  } else {
+    $exp_v6 = $parm_ipv6;
   }
   my(@components) = split /:/, $exp_v6;
   my(@nibbles) = reverse (split /\s*/, shift @components);
@@ -3153,7 +3559,7 @@ closedir(DIR);
 open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
 
 print "\nPress RETURN to run the tests: ";
-$_ = <T>;
+$_ = $force_continue ? "c" : <T>;
 print "\n";
 
 $lasttestdir = "";
@@ -3163,7 +3569,7 @@ foreach $test (@test_list)
   local($lineno) = 0;
   local($commandno) = 0;
   local($subtestno) = 0;
-  local($testno) = substr($test, -4);
+  (local $testno = $test) =~ s|.*/||;
   local($sortlog) = 0;
 
   my($gnutls) = 0;
@@ -3219,6 +3625,7 @@ foreach $test (@test_list)
   $stdout_skip = 0;
   $rmfiltertest = 0;
   $is_ipv6test = 0;
+  $TEST_STATE->{munge} = "";
 
   # Remove the associative arrays used to hold checked mail files and msglogs
 
@@ -3226,9 +3633,20 @@ foreach $test (@test_list)
   undef %expected_msglogs;
 
   # Open the test's script
-
   open(SCRIPT, "scripts/$test") ||
     tests_exit(-1, "Failed to open \"scripts/$test\": $!");
+  # Run through the script once to set variables which should be global
+  while (<SCRIPT>)
+    {
+    if (/^no_message_check/) { $message_skip = 1; next; }
+    if (/^no_msglog_check/)  { $msglog_skip = 1; next; }
+    if (/^no_stderr_check/)  { $stderr_skip = 1; next; }
+    if (/^no_stdout_check/)  { $stdout_skip = 1; next; }
+    if (/^rmfiltertest/)     { $rmfiltertest = 1; next; }
+    if (/^sortlog/)          { $sortlog = 1; next; }
+    }
+  # Reset to beginning of file for per test interpreting/processing
+  seek(SCRIPT, 0, 0);
 
   # The first line in the script must be a comment that is used to identify
   # the set of tests as a whole.
@@ -3251,6 +3669,8 @@ foreach $test (@test_list)
     while (<SCRIPT>)
       {
       $lineno++;
+      # Could remove these variable settings because they are already
+      # set above, but doesn't hurt to leave them here.
       if (/^no_message_check/) { $message_skip = 1; next; }
       if (/^no_msglog_check/)  { $msglog_skip = 1; next; }
       if (/^no_stderr_check/)  { $stderr_skip = 1; next; }
@@ -3305,8 +3725,9 @@ foreach $test (@test_list)
 
     my($subtest_startline) = $lineno;
 
-    # Now run the command. The function returns 0 if exim was run and waited
-    # for, 1 if any other command was run and waited for, and 2 if a command
+    # Now run the command. The function returns 0 for an inline command,
+    # 1 if a non-exim command was run and waited for, 2 if an exim
+    # command was run and waited for, and 3 if a command
     # was run and not waited for (usually a daemon or server startup).
 
     my($commandname) = "";
@@ -3314,6 +3735,8 @@ foreach $test (@test_list)
     my($rc, $run_extra) = run_command($testno, \$subtestno, \$expectrc, \$commandname, $TEST_STATE);
     my($cmdrc) = $?;
 
+$0 = "[runtest $testno]";
+
     if ($debug) {
       print ">> rc=$rc cmdrc=$cmdrc\n";
       if (defined $run_extra) {
@@ -3364,8 +3787,18 @@ foreach $test (@test_list)
       for (;;)
         {
         print "\nshow stdErr, show stdOut, Retry, Continue (without file comparison), or Quit? [Q] ";
-        $_ = <T>;
+        $_ = $force_continue ? "c" : <T>;
         tests_exit(1) if /^q?$/i;
+        log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+        if ($force_continue)
+          {
+          print "\nstderr tail:\n";
+          print "===================\n";
+          system("tail -20 test-stderr");
+          print "===================\n";
+          print "... continue forced\n";
+          }
+
         last if /^[rc]$/i;
         if (/^e$/i)
           {
@@ -3401,8 +3834,10 @@ foreach $test (@test_list)
         for (;;)
           {
           print "\nShow server stdout, Retry, Continue, or Quit? [Q] ";
-          $_ = <T>;
+          $_ = $force_continue ? "c" : <T>;
           tests_exit(1) if /^q?$/i;
+          log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+          print "... continue forced\n" if $force_continue;
           last if /^[rc]$/i;
 
           if (/^s$/i)
@@ -3422,6 +3857,7 @@ foreach $test (@test_list)
 
   # The script has finished. Check the all the output that was generated. The
   # function returns 0 if all is well, 1 if we should rerun the test (the files
+  # function returns 0 if all is well, 1 if we should rerun the test (the files
   # have been updated). It does not return if the user responds Q to a prompt.
 
   if ($retry)
@@ -3433,7 +3869,7 @@ foreach $test (@test_list)
 
   if ($docheck)
     {
-    if (check_output() != 0)
+    if (check_output($TEST_STATE->{munge}) != 0)
       {
       print (("#" x 79) . "\n");
       redo;