X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/73305f2ddd22b79d59780a522e16b233228f2ad3..be36e5721725253b7529899884d7fe8ecd5120b9:/doc/doc-txt/experimental-spec.txt?ds=sidebyside diff --git a/doc/doc-txt/experimental-spec.txt b/doc/doc-txt/experimental-spec.txt index b80e02b4c..e7a0d0668 100644 --- a/doc/doc-txt/experimental-spec.txt +++ b/doc/doc-txt/experimental-spec.txt @@ -6,114 +6,6 @@ about experimental features, all of which are unstable and liable to incompatible change. -PRDR support --------------------------------------------------------------- - -Per-Recipient Data Reponse is an SMTP extension proposed by Eric Hall -in a (now-expired) IETF draft from 2007. It's not hit mainstream -use, but has apparently been implemented in the META1 MTA. - -There is mention at http://mail.aegee.org/intern/sendmail.html -of a patch to sendmail "to make it PRDR capable". - - ref: http://www.eric-a-hall.com/specs/draft-hall-prdr-00.txt - -If Exim is built with EXPERIMENTAL_PRDR there is a new config -boolean "prdr_enable" which controls whether PRDR is advertised -as part of an EHLO response, a new "acl_data_smtp_prdr" ACL -(called for each recipient, after data arrives but before the -data ACL), and a new smtp transport option "hosts_try_prdr". - -PRDR may be used to support per-user content filtering. Without it -one must defer any recipient after the first that has a different -content-filter configuration. With PRDR, the RCPT-time check -for this can be disabled when the MAIL-time $smtp_command included -"PRDR". Any required difference in behaviour of the main DATA-time -ACL should however depend on the PRDR-time ACL having run, as Exim -will avoid doing so in some situations (eg. single-recipient mails). - - - -OCSP Stapling support --------------------------------------------------------------- - -X.509 PKI certificates expire and can be revoked; to handle this, the -clients need some way to determine if a particular certificate, from a -particular Certificate Authority (CA), is still valid. There are three -main ways to do so. - -The simplest way is to serve up a Certificate Revocation List (CRL) with -an ordinary web-server, regenerating the CRL before it expires. The -downside is that clients have to periodically re-download a potentially -huge file from every certificate authority it knows of. - -The way with most moving parts at query time is Online Certificate -Status Protocol (OCSP), where the client verifies the certificate -against an OCSP server run by the CA. This lets the CA track all -usage of the certs. This requires running software with access to the -private key of the CA, to sign the responses to the OCSP queries. OCSP -is based on HTTP and can be proxied accordingly. - -The only widespread OCSP server implementation (known to this writer) -comes as part of OpenSSL and aborts on an invalid request, such as -connecting to the port and then disconnecting. This requires -re-entering the passphrase each time some random client does this. - -The third way is OCSP Stapling; in this, the server using a certificate -issued by the CA periodically requests an OCSP proof of validity from -the OCSP server, then serves it up inline as part of the TLS -negotiation. This approach adds no extra round trips, does not let the -CA track users, scales well with number of certs issued by the CA and is -resilient to temporary OCSP server failures, as long as the server -starts retrying to fetch an OCSP proof some time before its current -proof expires. The downside is that it requires server support. - -If Exim is built with EXPERIMENTAL_OCSP and it was built with OpenSSL, -then it gains a new global option: "tls_ocsp_file". - -The file specified therein is expected to be in DER format, and contain -an OCSP proof. Exim will serve it as part of the TLS handshake. This -option will be re-expanded for SNI, if the tls_certificate option -contains $tls_sni, as per other TLS options. - -Exim does not at this time implement any support for fetching a new OCSP -proof. The burden is on the administrator to handle this, outside of -Exim. The file specified should be replaced atomically, so that the -contents are always valid. Exim will expand the "tls_ocsp_file" option -on each connection, so a new file will be handled transparently on the -next connection. - -Exim will check for a valid next update timestamp in the OCSP proof; -if not present, or if the proof has expired, it will be ignored. - -Also, given EXPERIMENTAL_OCSP and OpenSSL, the smtp transport gains -a "hosts_require_ocsp" option; a host-list for which an OCSP Stapling -is requested and required for the connection to proceed. The host(s) -should also be in "hosts_require_tls", and "tls_verify_certificates" -configured for the transport. - -For the client to be able to verify the stapled OCSP the server must -also supply, in its stapled information, any intermediate -certificates for the chain leading to the OCSP proof from the signer -of the server certificate. There may be zero or one such. These -intermediate certificates should be added to the server OCSP stapling -file (named by tls_ocsp_file). - -At this point in time, we're gathering feedback on use, to determine if -it's worth adding complexity to the Exim daemon to periodically re-fetch -OCSP files and somehow handling multiple files. - - A helper script "ocsp_fetch.pl" for fetching a proof from a CA - OCSP server is supplied. The server URL may be included in the - server certificate, if the CA is helpful. - - One fail mode seen was the OCSP Signer cert expiring before the end - of vailidity of the OCSP proof. The checking done by Exim/OpenSSL - noted this as invalid overall, but the re-fetch script did not. - - - - Brightmail AntiSpam (BMI) suppport -------------------------------------------------------------- @@ -452,15 +344,21 @@ which the spf condition should succeed. Valid strings are: This means the queried domain has published a SPF record, but wants to allow outside servers to send mail under its domain as well. - o err_perm This indicates a syntax error in the SPF - record of the queried domain. This should be - treated like "none". - o err_temp This indicates a temporary error during all + This should be treated like "none". + o permerror This indicates a syntax error in the SPF + record of the queried domain. You may deny + messages when this occurs. (Changed in 4.83) + o temperror This indicates a temporary error during all processing, including Exim's SPF processing. You may defer messages when this occurs. + (Changed in 4.83) + o err_temp Same as permerror, deprecated in 4.83, will be + removed in a future release. + o err_perm Same as temperror, deprecated in 4.83, will be + removed in a future release. You can prefix each string with an exclamation mark to invert -is meaning, for example "!fail" will match all results but +its meaning, for example "!fail" will match all results but "fail". The string list is evaluated left-to-right, in a short-circuit fashion. When a string matches the outcome of the SPF check, the condition succeeds. If none of the listed @@ -510,8 +408,8 @@ variables. $spf_result This contains the outcome of the SPF check in string form, - one of pass, fail, softfail, none, neutral, err_perm or - err_temp. + one of pass, fail, softfail, none, neutral, permerror or + temperror. $spf_smtp_comment This contains a string that can be used in a SMTP response @@ -773,7 +671,7 @@ fails. Of course, you can also use any other lookup method that Exim supports, including LDAP, Postgres, MySQL, etc, as long as the -result is a list of colon-separated strings; +result is a list of colon-separated strings. Several expansion variables are set before the DATA ACL is processed, and you can use them in this ACL. The following @@ -781,7 +679,10 @@ expansion variables are available: o $dmarc_status This is a one word status indicating what the DMARC library - thinks of the email. + thinks of the email. It is a combination of the results of + DMARC record lookup and the SPF/DKIM/DMARC processing results + (if a DMARC record was found). The actual policy declared + in the DMARC record is in a separate expansion variable. o $dmarc_status_text This is a slightly longer, human readable status. @@ -790,6 +691,11 @@ expansion variables are available: This is the domain which DMARC used to look up the DMARC policy record. + o $dmarc_domain_policy + This is the policy declared in the DMARC record. Valid values + are "none", "reject" and "quarantine". It is blank when there + is any error, including no DMARC record. + o $dmarc_ar_header This is the entire Authentication-Results header which you can add using an add_header modifier. @@ -825,6 +731,9 @@ b. Configure, somewhere before the DATA ACL, the control option to warn !domains = +screwed_up_dmarc_records control = dmarc_enable_forensic + warn condition = (lookup if destined to mailing list) + set acl_m_mailing_list = 1 + (DATA ACL) warn dmarc_status = accept : none : off !authenticated = * @@ -840,6 +749,10 @@ b. Configure, somewhere before the DATA ACL, the control option to set $acl_m_quarantine = 1 # Do something in a transport with this flag variable + deny condition = ${if eq{$dmarc_domain_policy}{reject}} + condition = ${if eq{$acl_m_mailing_list}{1}} + message = Messages from $dmarc_used_domain break mailing lists + deny dmarc_status = reject !authenticated = * message = Message from $domain_used_domain failed sender's DMARC policy, REJECT @@ -849,87 +762,94 @@ b. Configure, somewhere before the DATA ACL, the control option to Transport post-delivery actions -------------------------------------------------------------- -An arbitrary per-transport string can be expanded on successful delivery, +An arbitrary per-transport string can be expanded upon various transport events and (for SMTP transports) a second string on deferrals caused by a host error. +Additionally a main-section configuration option can be expanded on some +per-message events. This feature may be used, for example, to write exim internal log information (not available otherwise) into a database. -In order to use the feature, you must set +In order to use the feature, you must compile with EXPERIMENTAL_TPDA=yes in your Local/Makefile -and define the expandable strings in the runtime config file, to -be executed at end of delivery. +and define one or both of +- the tpda_event_action option in the transport +- the delivery_event_action +to be expanded when the event fires. -Additionally, there are 6 more variables, available at end of -delivery: +A new variable, $tpda_event, is set to the event type when the +expansion is done. The current list of events is: -tpda_delivery_ip IP of host, which has accepted delivery -tpda_delivery_port Port of remote host which has accepted delivery -tpda_delivery_fqdn FQDN of host, which has accepted delivery -tpda_delivery_local_part local part of address being delivered -tpda_delivery_domain domain part of address being delivered -tpda_delivery_confirmation SMTP confirmation message + msg:complete main per message + msg:delivery transport per recipient + msg:host:defer transport per attempt + msg:fail:delivery main per recipient + msg:fail:internal main per recipient + tcp:connect transport per connection + tcp:close transport per connection + tls:cert transport per certificate in verification chain + smtp:connect transport per connection -In case of a deferral caused by a host-error: -tpda_defer_errno Error number -tpda_defer_errstr Error string possibly containing more details +The expansion is called for all event types, and should use the $tpda_event +value to decide when to act. The variable data is a colon-separated +list, describing an event tree. -The $router_name and $transport_name variables are also usable. +There is an auxilary variable, $tpda_data, for which the +content is event_dependent: + msg:delivery smtp confirmation mssage + msg:host:defer error string + tls:cert verification chain depth + smtp:connect smtp banner -To take action after successful deliveries, set the following option -on any transport of interest. +The msg:host:defer event populates one extra variable, $tpda_defer_errno. + +The following variables are likely to be useful depending on the event type: + + router_name, transport_name + local_part, domain + host, host_address, host_port + tls_out_peercert + lookup_dnssec_authenticated, tls_out_dane + sending_ip_address, sending_port + message_exim_id -tpda_delivery_action An example might look like: -tpda_delivery_action = \ -${lookup pgsql {SELECT * FROM record_Delivery( \ +tpda_event_action = ${if = {msg:delivery}{$tpda_event} \ +{${lookup pgsql {SELECT * FROM record_Delivery( \ '${quote_pgsql:$sender_address_domain}',\ '${quote_pgsql:${lc:$sender_address_local_part}}', \ - '${quote_pgsql:$tpda_delivery_domain}', \ - '${quote_pgsql:${lc:$tpda_delivery_local_part}}', \ - '${quote_pgsql:$tpda_delivery_ip}', \ - '${quote_pgsql:${lc:$tpda_delivery_fqdn}}', \ - '${quote_pgsql:$message_exim_id}')}} - -The string is expanded after the delivery completes and any + '${quote_pgsql:$domain}', \ + '${quote_pgsql:${lc:$local_part}}', \ + '${quote_pgsql:$host_address}', \ + '${quote_pgsql:${lc:$host}}', \ + '${quote_pgsql:$message_exim_id}')}} \ +} {}} + +The string is expanded for each of the supported events and any side-effects will happen. The result is then discarded. Note that for complex operations an ACL expansion can be used. -In order to log host deferrals, add the following option to an SMTP -transport: +The expansion of the tpda_event_action option should normally +return an empty string. Should it return anything else the +following will be forced: -tpda_host_defer_action + msg:delivery (ignored) + msg:host:defer (ignored) + msg:fail:delivery (ignored) + tcp:connect do not connect + tcp:close (ignored) + tls:cert refuse verification + smtp:connect close connection -This is a private option of the SMTP transport. It is intended to -log failures of remote hosts. It is executed only when exim has -attempted to deliver a message to a remote host and failed due to -an error which doesn't seem to be related to the individual -message, sender, or recipient address. -See section 47.2 of the exim documentation for more details on how -this is determined. -Example: -tpda_host_defer_action = \ -${lookup mysql {insert into delivlog set \ - msgid = '${quote_mysql:$message_exim_id}', \ - senderlp = '${quote_mysql:${lc:$sender_address_local_part}}', \ - senderdom = '${quote_mysql:$sender_address_domain}', \ - delivlp = '${quote_mysql:${lc:$tpda_delivery_local_part}}', \ - delivdom = '${quote_mysql:$tpda_delivery_domain}', \ - delivip = '${quote_mysql:$tpda_delivery_ip}', \ - delivport = '${quote_mysql:$tpda_delivery_port}', \ - delivfqdn = '${quote_mysql:$tpda_delivery_fqdn}', \ - deliverrno = '${quote_mysql:$tpda_defer_errno}', \ - deliverrstr = '${quote_mysql:$tpda_defer_errstr}' \ - }} Redis Lookup @@ -1021,6 +941,8 @@ Proxy Protocol Support Exim now has Experimental "Proxy Protocol" support. It was built on specifications from: http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt +Above URL revised May 2014 to change version 2 spec: +http://git.1wt.eu/web?p=haproxy.git;a=commitdiff;h=afb768340c9d7e50d8e The purpose of this function is so that an application load balancer, such as HAProxy, can sit in front of several Exim servers and Exim @@ -1066,10 +988,16 @@ Proxy Protocol server at 192.168.1.2 will look like this: 3. In the ACL's the following expansion variables are available. -proxy_host_address The src IP of the proxy server making the connection -proxy_host_port The src port the proxy server is using -proxy_session Boolean, yes/no, the connected host is required to use - Proxy Protocol. +proxy_host_address The (internal) src IP of the proxy server + making the connection to the Exim server. +proxy_host_port The (internal) src port the proxy server is + using to connect to the Exim server. +proxy_target_address The dest (public) IP of the remote host to + the proxy server. +proxy_target_port The dest port the remote host is using to + connect to the proxy server. +proxy_session Boolean, yes/no, the connected host is required + to use Proxy Protocol. There is no expansion for a failed proxy session, however you can detect it by checking if $proxy_session is true but $proxy_host is empty. As @@ -1089,11 +1017,34 @@ an example, in my connect ACL, I have: [$sender_host_address] through proxy protocol \ host $proxy_host_address -4. Runtime issues to be aware of: + # Possibly more clear + warn logwrite = Remote Source Address: $sender_host_address:$sender_host_port + logwrite = Proxy Target Address: $proxy_target_address:$proxy_target_port + logwrite = Proxy Internal Address: $proxy_host_address:$proxy_host_port + logwrite = Internal Server Address: $received_ip_address:$received_port + + +4. Recommended ACL additions: - Since the real connections are all coming from your proxy, and the per host connection tracking is done before Proxy Protocol is evaluated, smtp_accept_max_per_host must be set high enough to handle all of the parallel volume you expect per inbound proxy. + - With the smtp_accept_max_per_host set so high, you lose the ability + to protect your server from massive numbers of inbound connections + from one IP. In order to prevent your server from being DOS'd, you + need to add a per connection ratelimit to your connect ACL. I + suggest something like this: + + # Set max number of connections per host + LIMIT = 5 + # Or do some kind of IP lookup in a flat file or database + # LIMIT = ${lookup{$sender_host_address}iplsearch{/etc/exim/proxy_limits}} + + defer message = Too many connections from this IP right now + ratelimit = LIMIT / 5s / per_conn / strict + + +5. Runtime issues to be aware of: - The proxy has 3 seconds (hard-coded in the source code) to send the required Proxy Protocol header after it connects. If it does not, the response to any commands will be: @@ -1112,7 +1063,7 @@ an example, in my connect ACL, I have: mail programs from working because that would require mail from localhost to use Proxy Protocol. Again, not advised! -5. Example of a refused connection because the Proxy Protocol header was +6. Example of a refused connection because the Proxy Protocol header was not sent from a host configured to use Proxy Protocol. In the example, the 3 second timeout occurred (when a Proxy Protocol banner should have been sent), the banner was displayed to the user, but all commands are @@ -1127,6 +1078,229 @@ QUIT 221 mail.example.net closing connection +DSN Support +-------------------------------------------------------------- + +DSN Support tries to add RFC 3461 support to Exim. It adds support for +*) the additional parameters for MAIL FROM and RCPT TO +*) RFC complient MIME DSN messages for all of + success, failure and delay notifications +*) dsn_advertise_hosts main option to select which hosts are able + to use the extension +*) dsn_lasthop router switch to end DSN processing + +In case of failure reports this means that the last three parts, the message body +intro, size info and final text, of the defined template are ignored since there is no +logical place to put them in the MIME message. + +All the other changes are made without changing any defaults + +Building exim: +-------------- + +Define +EXPERIMENTAL_DSN=YES +in your Local/Makefile. + +Configuration: +-------------- +All DSNs are sent in MIME format if you built exim with EXPERIMENTAL_DSN=YES +No option needed to activate it, and no way to turn it off. + +Failure and delay DSNs are triggered as usual except a sender used NOTIFY=... +to prevent them. + +Support for Success DSNs is added and activated by NOTIFY=SUCCESS by clients. + +Add +dsn_advertise_hosts = * +or a more restrictive host_list to announce DSN in EHLO answers + +Those hosts can then use NOTIFY,ENVID,RET,ORCPT options. + +If a message is relayed to a DSN aware host without changing the envelope +recipient the options are passed along and no success DSN is generated. + +A redirect router will always trigger a success DSN if requested and the DSN +options are not passed any further. + +A success DSN always contains the recipient address as submitted by the +client as required by RFC. Rewritten addresses are never exposed. + +If you used DSN patch up to 1.3 before remove all "dsn_process" switches from +your routers since you don't need them anymore. There is no way to "gag" +success DSNs anymore. Announcing DSN means answering as requested. + +You can prevent Exim from passing DSN options along to other DSN aware hosts by defining +dsn_lasthop +in a router. Exim will then send the success DSN himself if requested as if +the next hop does not support DSN. +Adding it to a redirect router makes no difference. + + +Certificate name checking +-------------------------------------------------------------- +The X509 certificates used for TLS are supposed be verified +that they are owned by the expected host. The coding of TLS +support to date has not made these checks. + +If built with EXPERIMENTAL_CERTNAMES defined, code is +included to do so, and a new smtp transport option +"tls_verify_cert_hostname" supported which takes a list of +names for which the checks must be made. The host must +also be in "tls_verify_hosts". + +Both Subject and Subject-Alternate-Name certificate fields +are supported, as are wildcard certificates (limited to +a single wildcard being the initial component of a 3-or-more +component FQDN). + + +DANE +------------------------------------------------------------ +DNS-based Authentication of Named Entities, as applied +to SMTP over TLS, provides assurance to a client that +it is actually talking to the server it wants to rather +than some attacker operating a Man In The Middle (MITM) +operation. The latter can terminate the TLS connection +you make, and make another one to the server (so both +you and the server still think you have an encrypted +connection) and, if one of the "well known" set of +Certificate Authorities has been suborned - something +which *has* been seen already (2014), a verifiable +certificate (if you're using normal root CAs, eg. the +Mozilla set, as your trust anchors). + +What DANE does is replace the CAs with the DNS as the +trust anchor. The assurance is limited to a) the possibility +that the DNS has been suborned, b) mistakes made by the +admins of the target server. The attack surface presented +by (a) is thought to be smaller than that of the set +of root CAs. + +It also allows the server to declare (implicitly) that +connections to it should use TLS. An MITM could simply +fail to pass on a server's STARTTLS. + +DANE scales better than having to maintain (and +side-channel communicate) copies of server certificates +for every possible target server. It also scales +(slightly) better than having to maintain on an SMTP +client a copy of the standard CAs bundle. It also +means not having to pay a CA for certificates. + +DANE requires a server operator to do three things: +1) run DNSSEC. This provides assurance to clients +that DNS lookups they do for the server have not +been tampered with. The domain MX record applying +to this server, its A record, its TLSA record and +any associated CNAME records must all be covered by +DNSSEC. +2) add TLSA DNS records. These say what the server +certificate for a TLS connection should be. +3) offer a server certificate, or certificate chain, +in TLS connections which is traceable to the one +defined by (one of?) the TSLA records + +There are no changes to Exim specific to server-side +operation of DANE. + +The TLSA record for the server may have "certificate +usage" of DANE-TA(2) or DANE-EE(3). The latter specifies +the End Entity directly, i.e. the certificate involved +is that of the server (and should be the sole one transmitted +during the TLS handshake); this is appropriate for a +single system, using a self-signed certificate. + DANE-TA usage is effectively declaring a specific CA +to be used; this might be a private CA or a public, +well-known one. A private CA at simplest is just +a self-signed certificate which is used to sign +cerver certificates, but running one securely does +require careful arrangement. If a private CA is used +then either all clients must be primed with it, or +(probably simpler) the server TLS handshake must transmit +the entire certificate chain from CA to server-certificate. +If a public CA is used then all clients must be primed with it +(losing one advantage of DANE) - but the attack surface is +reduced from all public CAs to that single CA. +DANE-TA is commonly used for several services and/or +servers, each having a TLSA query-domain CNAME record, +all of which point to a single TLSA record. + +The TLSA record should have a Selector field of SPKI(1) +and a Matching Type field of SHA2-512(2). + +At the time of writing, https://www.huque.com/bin/gen_tlsa +is useful for quickly generating TLSA records; and commands like + + openssl x509 -in -pubkey -noout /dev/null \ + | openssl sha512 \ + | awk '{print $2}' + +are workable for 4th-field hashes. + +For use with the DANE-TA model, server certificates +must have a correct name (SubjectName or SubjectAltName). + +The use of OCSP-stapling should be considered, allowing +for fast revocation of certificates (which would otherwise +be limited by the DNS TTL on the TLSA records). However, +this is likely to only be usable with DANE-TA. NOTE: the +default of requesting OCSP for all hosts is modified iff +DANE is in use, to: + + hosts_request_ocsp = ${if or { {= {0}{$tls_out_tlsa_usage}} \ + {= {4}{$tls_out_tlsa_usage}} } \ + {*}{}} + +The (new) variable $tls_out_tlsa_usage is a bitfield with +numbered bits set for TLSA record usage codes. +The zero above means DANE was not in use, +the four means that only DANE-TA usage TLSA records were +found. If the definition of hosts_request_ocsp includes the +string "tls_out_tlsa_usage", they are re-expanded in time to +control the OCSP request. + +This modification of hosts_request_ocsp is only done if +it has the default value of "*". Admins who change it, and +those who use hosts_require_ocsp, should consider the interaction +with DANE in their OCSP settings. + + +For client-side DANE there are two new smtp transport options, +hosts_try_dane and hosts_require_dane. They do the obvious thing. +[ should they be domain-based rather than host-based? ] + +DANE will only be usable if the target host has DNSSEC-secured +MX, A and TLSA records. + +A TLSA lookup will be done if either of the above options match +and the host-lookup succeded using dnssec. +If the TLSA lookup succeeds, a TLS connection will be required +for the host. + +(TODO: specify when fallback happens vs. when the host is not used) + +If dane is in use the following transport options are ignored: + hosts_require_tls + tls_verify_hosts + tls_try_verify_hosts + tls_verify_certificates + tls_crl + tls_verify_cert_hostnames + +Currently dnssec_request_domains must be active (need to think about that) +and dnssec_require_domains is ignored. + +If verification was successful using DANE then the "CV" item +in the delivery log line will show as "CV=dane". + +There is a new variable $tls_out_dane which will have "yes" if +verification succeeded using DANE and "no" otherwise (only useful +in combination with EXPERIMENTAL_TPDA), and a new variable +$tls_out_tlsa_usage (detailed above). + -------------------------------------------------------------- End of file