X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/69358f0206debf14a18c7e798e23133d304232b6..1509d3a863c6aef224bf694dfadd3a5844b08a3e:/doc/doc-txt/NewStuff?ds=sidebyside diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff index 1a4d69335..151960efc 100644 --- a/doc/doc-txt/NewStuff +++ b/doc/doc-txt/NewStuff @@ -1,4 +1,4 @@ -$Cambridge: exim/doc/doc-txt/NewStuff,v 1.3 2004/10/19 11:04:26 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/NewStuff,v 1.66 2005/09/06 13:17:36 ph10 Exp $ New Features in Exim -------------------- @@ -8,610 +8,692 @@ but have not yet made it into the main manual (which is most conveniently updated when there is a relatively large batch of changes). The doc/ChangeLog file contains a listing of all changes, including bug fixes. +Exim version 4.53 +----------------- + +TK/01 Added the "success_on_redirect" address verification option. When an + address generates new addresses during routing, Exim will abort + verification with "success" when more than one address has been + generated, but continue to verify a single new address. The latter + does not happen when the new "success_on_redirect" option is set, like + + require verify = recipient/success_on_redirect/callout=10s + + In that case, verification will succeed when a router generates a new + address. -Version 4.44 ------------- +PH/01 Support for SQLite database lookups has been added. This is another + query-style lookup, but it is slightly different from the others because + a file name is required in addition to the SQL query. This is because an + SQLite database is a single file and there is no daemon as in other SQL + databases. The interface to Exim requires the name of the file, as an + absolute path, to be given at the start of the query. It is separated + from the query by white space. This means that the path name cannot + contain white space. Here is a lookup expansion example: + + ${lookup sqlite {/some/thing/sqlitedb \ + select name from aliases where id='ph10';}} + + In a list, the syntax is similar. For example: + + domainlist relay_domains = sqlite;/some/thing/sqlitedb \ + select * from relays where ip='$sender_host_address'; + + The only character affected by the ${quote_sqlite: operator is a single + quote, which it doubles. + + The SQLite library handles multiple simultaneous accesses to the database + internally. Multiple readers are permitted, but only one process can + update at once. Attempts to access the database while it is being updated + are rejected after a timeout period, during which the SQLite library + waits for the lock to be released. In Exim, the default timeout is set + to 5 seconds, but it can be changed by means of the sqlite_lock_timeout + option. + + Note that you must set LOOKUP_SQLITE=yes in Local/Makefile in order to + obtain SQLite support, and you will also need to add -lsqlite3 to the + EXTRALIBS setting. And of course, you have to install SQLite on your + host first. + +PH/02 The variable $message_id is now deprecated, to be replaced by + $message_exim_id, which makes it clearer which ID is being referenced. + +PH/03 The use of forbid_filter_existstest now also locks out the use of the + ${stat: expansion item. + +PH/04 The IGNOREQUOTA extension to the LMTP protocol is now available in both + the lmtp transport and the smtp transport running in LMTP mode. In the + lmtp transport there is a new Boolean option called ignore_quota, and in + the smtp transport there is a new Boolean option called + lmtp_ignore_quota. If either of these options is set TRUE, the string + "IGNOREQUOTA" is added to RCPT commands when using the LMTP protocol, + provided that the server has advertised support for IGNOREQUOTA in its + response to the LHLO command. + +PH/05 Previously, if "verify = helo" was set in an ACL, the condition was true + only if the host matched helo_try_verify_hosts, which caused the + verification to occur when the EHLO/HELO command was issued. The ACL just + tested the remembered result. Now, if a previous verification attempt has + not happened, "verify = helo" does it there and then. + +PH/06 It is now possible to specify a port number along with a host name or + IP address in the list of hosts defined in the manualroute or + queryprogram routers, fallback_hosts, or the "hosts" option of the smtp + transport. These all override any port specification on the transport. + The relatively standard syntax of using a colon separator has been + adopted, but there are some gotchas that need attention: + + * In all these lists of hosts, colon is the default separator, so either + the colon that specifies a port must be doubled, or the separator must + be changed. The following two examples have the same effect: + + fallback_hosts = host1.tld::1225 : host2.tld::1226 + fallback_hosts = <; host1.tld:1225 ; host2.tld:1226 + + * When IPv6 addresses are involved, it gets worse, because they contain + colons of their own. To make this case easier, it is permitted to + enclose an IP address (either v4 or v6) in square brackets if a port + number follows. Here's an example from a manualroute router: + + route_list = * " + +TF/03 The control = fakereject ACL modifier now has a fakedefer counterpart, + which works in exactly the same way except it causes a fake SMTP 450 + response after the message data instead of a fake SMTP 550 response. + You must take care when using fakedefer because it will cause messages + to be duplicated when the sender retries. Therefore you should not use + fakedefer if the message will be delivered normally. + +TF/04 There is a new ratelimit ACL condition which can be used to measure + and control the rate at which clients can send email. This is more + powerful than the existing smtp_ratelimit_* options, because those + options only control the rate of commands in a single SMTP session, + whereas the new ratelimit condition works across all connections + (concurrent and sequential) to the same host. + + The syntax of the ratelimit condition is: + + ratelimit = /

/ / + + If the average client sending rate is less than m messages per time + period p then the condition is false, otherwise it is true. + + The parameter p is the smoothing time constant, in the form of an Exim + time interval e.g. 8h for eight hours. A larger time constant means it + takes Exim longer to forget a client's past behaviour. The parameter m is + the maximum number of messages that a client can send in a fast burst. By + increasing both m and p but keeping m/p constant, you can allow a client + to send more messages in a burst without changing its overall sending + rate limit. Conversely, if m and p are both small then messages must be + sent at an even rate. + + The key is used to look up the data used to calcluate the client's + average sending rate. This data is stored in a database maintained by + Exim in its spool directory alongside the retry database etc. For + example, you can limit the sending rate of each authenticated user, + independent of the computer they are sending from, by setting the key + to $authenticated_id. The default key is $sender_host_address. + Internally, Exim includes the smoothing constant p and the options in + the lookup key because they alter the meaning of the stored data. + This is not true for the limit m, so you can alter the configured + maximum rate and Exim will still remember clients' past behaviour, + but if you alter the other ratelimit parameters Exim will effectively + forget their past behaviour. + + Each ratelimit condition can have up to two options. The first option + specifies what Exim measures the rate of, and the second specifies how + Exim handles excessively fast clients. + + The per_mail option means that it measures the client's rate of sending + messages. This is the default if none of the per_* options is specified. + + The per_conn option means that it measures the client's connection rate. + + The per_byte option limits the sender's email bandwidth. Note that it + is best to use this option in the DATA ACL; if it is used in an earlier + ACL it relies on the SIZE parameter on the MAIL command, which may be + inaccurate or completely missing. You can follow the limit m in the + configuration with K, M, or G to specify limits in kilobytes, + megabytes, or gigabytes respectively. + + The per_cmd option means that Exim recomputes the rate every time the + condition is processed, which can be used to limit the SMTP command rate. + The alias per_rcpt is provided for use in the RCPT ACL instead of per_cmd + to make it clear that the effect is to limit the rate at which recipients + are accepted. Note that in this case the rate limiting engine will see a + message with many recipients as a large high-speed burst. + + If a client's average rate is greater than the maximum, the rate + limiting engine can react in two possible ways, depending on the + presence of the strict or leaky options. This is independent of the + other counter-measures (e.g. rejecting the message) that may be + specified by the rest of the ACL. The default mode is leaky, which + avoids a sender's over-aggressive retry rate preventing it from getting + any email through. + + The strict option means that the client's recorded rate is always + updated. The effect of this is that Exim measures the client's average + rate of attempts to send email, which can be much higher than the + maximum. If the client is over the limit it will be subjected to + counter-measures until it slows down below the maximum rate. + + The leaky option means that the client's recorded rate is not updated + if it is above the limit. The effect of this is that Exim measures the + client's average rate of successfully sent email, which cannot be + greater than the maximum. If the client is over the limit it will + suffer some counter-measures, but it will still be able to send email + at the configured maximum rate, whatever the rate of its attempts. + + As a side-effect, the ratelimit condition will set the expansion + variables $sender_rate containing the client's computed rate, + $sender_rate_limit containing the configured value of m, and + $sender_rate_period containing the configured value of p. + + Exim's other ACL facilities are used to define what counter-measures + are taken when the rate limit is exceeded. This might be anything from + logging a warning (e.g. while measuring existing sending rates in order + to define our policy), through time delays to slow down fast senders, + up to rejecting the message. For example, + + # Log all senders' rates + warn + ratelimit = 0 / 1h / strict + log_message = \ + Sender rate $sender_rate > $sender_rate_limit / $sender_rate_period + + # Slow down fast senders + warn + ratelimit = 100 / 1h / per_rcpt / strict + delay = ${eval: 10 * ($sender_rate - $sender_rate_limit) } + + # Keep authenticated users under control + deny + ratelimit = 100 / 1d / strict / $authenticated_id + + # System-wide rate limit + defer + message = Sorry, too busy. Try again later. + ratelimit = 10 / 1s / $primary_hostname + + # Restrict incoming rate from each host, with a default rate limit + # set using a macro and special cases looked up in a table. + defer + message = Sender rate $sender_rate exceeds \ + $sender_rate_limit messages per $sender_rate_period + ratelimit = ${lookup {$sender_host_address} \ + cdb {DB/ratelimits.cdb} \ + {$value} {RATELIMIT} } + + Warning: if you have a busy server with a lot of ratelimit tests, + especially with the per_rcpt option, you may suffer from a performance + bottleneck caused by locking on the ratelimit hints database. Apart from + making your ACLs less complicated, you can reduce the problem by using a + RAM disk for Exim's hints directory, /var/spool/exim/db/. However this + means that Exim will lose its hints data after a reboot (including retry + hints, the callout cache, and ratelimit data). + +TK/01 Added an 'spf' lookup type that will return an SPF result for a given + email address (the key) and an IP address (the database): + + ${lookup {tom@duncanthrax.net} spf{217.115.139.137}} + + The lookup will return the same result strings as they can appear in + $spf_result (pass,fail,softfail,neutral,none,err_perm,err_temp). The + lookup is armored in EXPERIMENTAL_SPF. Currently, only IPv4 addresses + are supported. + + Patch submitted by Chris Webb . + +PH/02 There's a new verify callout option, "fullpostmaster", which first acts + as "postmaster" and checks the recipient . If that + fails, it tries just , without a domain, in accordance with + the specification in RFC 2821. + +PH/03 The action of the auto_thaw option has been changed. It no longer applies + to frozen bounce messages. + +TK/02 There are two new expansion items to help with the implementation of + the BATV "prvs" scheme in an Exim configuration: + + + ${prvs {

}{}{[KEYNUM]}} + + The "prvs" expansion item takes three arguments: A qualified RFC2821 + email address, a key and an (optional) key number. All arguments are + expanded before being used, so it is easily possible to lookup a key + and key number using the address as the lookup key. The key number is + optional and defaults to "0". The item will expand to a "prvs"-signed + email address, to be typically used with the "return_path" option on + a smtp transport. The decision if BATV should be used with a given + sender/recipient pair should be done on router level, to avoid having + to set "max_rcpt = 1" on the transport. + + + ${prvscheck {
}{}{}} + + The "prvscheck" expansion item takes three arguments. Argument 1 is + expanded first. When the expansion does not yield a SYNTACTICALLY + valid "prvs"-scheme address, the whole "prvscheck" item expands to + the empty string. If
is a "prvs"-encoded address after + expansion, two expansion variables are set up: - 1. There is a new build-time option called CONFIGURE_GROUP which works like - CONFIGURE_OWNER. It specifies one additional group that is permitted for - the runtime configuration file when the group write permission is set. + $prvscheck_address Contains the "prvs"-decoded version of + the address from argument 1. - 2. The "control=submission" facility has a new option /retain_sender. This - has the effect of setting local_sender_retain true and local_from_check - false for the incoming message in which it is encountered. + $prvscheck_keynum Contains the key number extracted from + the "prvs"-address in argument 1. + These two variables can be used in the expansion code of argument 2 + to retrieve the . The VALIDITY of the "prvs"-signed address + is then checked. The result is stored in yet another expansion + variable: -Version 4.43 ------------- + $prvscheck_result Contains the result of a "prvscheck" + expansion: Unset (the empty string) for + failure, "1" for success. - 1. There is a new Boolean global option called mua_wrapper, defaulting false. - This causes Exim to run an a restricted mode, in order to provide a very - specific service. - - Background: On a personal computer, it is a common requirement for all - email to be sent to a smarthost. There are plenty of MUAs that can be - configured to operate that way, for all the popular operating systems. - However, there are MUAs for Unix-like systems that cannot be so configured: - they submit messages using the command line interface of - /usr/sbin/sendmail. In addition, utility programs such as cron submit - messages this way. - - Requirement: The requirement is for something that can provide the - /usr/sbin/sendmail interface and deliver messages to a smarthost, but not - provide any queueing or retrying facilities. Furthermore, the delivery to - the smarthost should be synchronous, so that if it fails, the sending MUA - is immediately informed. In other words, we want something that in effect - converts a command-line MUA into a TCP/SMTP MUA. - - Solutions: There are a number of applications (for example, ssmtp) that do - this job. However, people have found them to be lacking in various ways. - For instance, some sites want to allow aliasing and forwarding before - sending to the smarthost. - - Using Exim: Exim already had the necessary infrastructure for doing this - job. Just a few tweaks were needed to make it behave as required, though it - is somewhat of an overkill to use a fully-featured MTA for this purpose. - - Setting mua_wrapper=true causes Exim to run in a special mode where it - assumes that it is being used to "wrap" a command-line MUA in the manner - just described. - - If you set mua_wrapper=true, you also need to provide a compatible router - and transport configuration. Typically there will be just one router and - one transport, sending everything to a smarthost. - - When run in MUA wrapping mode, the behaviour of Exim changes in the - following ways: - - (a) A daemon cannot be run, nor will Exim accept incoming messages from - inetd. In other words, the only way to submit messages is via the - command line. - - (b) Each message is synchonously delivered as soon as it is received (-odi - is assumed). All queueing options (queue_only, queue_smtp_domains, - control=queue, control=freeze in an ACL etc.) are quietly ignored. The - Exim reception process does not finish until the delivery attempt is - complete. If the delivery was successful, a zero return code is given. - - (c) Address redirection is permitted, but the final routing for all - addresses must be to the same remote transport, and to the same list of - hosts. Furthermore, the return_address must be the same for all - recipients, as must any added or deleted header lines. In other words, - it must be possible to deliver the message in a single SMTP - transaction, however many recipients there are. - - (d) If the conditions in (c) are not met, or if routing any address results - in a failure or defer status, or if Exim is unable to deliver all the - recipients successfully to one of the hosts immediately, delivery of - the entire message fails. - - (e) Because no queueing is allowed, all failures are treated as permanent; - there is no distinction between 4xx and 5xx SMTP response codes from - the smarthost. Furthermore, because only a single yes/no response can - be given to the caller, it is not possible to deliver to some - recipients and not others. If there is an error (temporary or - permanent) for any recipient, all are failed. - - (f) If more than one host is listed, Exim will try another host after a - connection failure or a timeout, in the normal way. However, if this - kind of failure happens for all the hosts, the delivery fails. - - (g) When delivery fails, an error message is written to the standard error - stream (as well as to Exim's log), and Exim exits to the caller with a - return code value 1. The message is expunged from Exim's spool files. - No bounce messages are ever generated. - - (h) No retry data is maintained, and any retry rules are ignored. - - (i) A number of Exim options are overridden: deliver_drop_privilege is - forced true, max_rcpt in the smtp transport is forced to "unlimited", - remote_max_parallel is forced to one, and fallback hosts are ignored. - - The overall effect is that Exim makes a single synchronous attempt to - deliver the message, failing if there is any kind of problem. Because no - local deliveries are done and no daemon can be run, Exim does not need root - privilege. It should be possible to run it setuid=exim instead of - setuid=root. See section 48.3 in the 4.40 manual for a general discussion - about the advantages and disadvantages of running without root privilege. - - 2. There have been problems with DNS servers when SRV records are looked up. - Some mis-behaving servers return a DNS error or timeout when a non-existent - SRV record is sought. Similar problems have in the past been reported for - MX records. The global dns_again_means_nonexist option can help with this - problem, but it is heavy-handed because it is a global option. There are - now two new options for the dnslookup router. They are called - srv_fail_domains and mx_fail_domains. In each case, the value is a domain - list. If an attempt to look up an SRV or MX record results in a DNS failure - or "try again" response, and the domain matches the relevant list, Exim - behaves as if the DNS had responded "no such record". In the case of an SRV - lookup, this means that the router proceeds to look for MX records; in the - case of an MX lookup, it proceeds to look for A or AAAA records, unless the - domain matches mx_domains. - - 3. The following functions are now available in the local_scan() API: - - (a) void header_remove(int occurrence, uschar *name) - - This function removes header lines. If "occurrence" is zero or negative, - all occurrences of the header are removed. If occurrence is greater - than zero, that particular instance of the header is removed. If no - header(s) can be found that match the specification, the function does - nothing. - - (b) BOOL header_testname(header_line *hdr, uschar *name, int length, - BOOL notdel) - - This function tests whether the given header has the given name. It - is not just a string comparison, because whitespace is permitted - between the name and the colon. If the "notdel" argument is TRUE, a - FALSE return is forced for all "deleted" headers; otherwise they are - not treated specially. For example: - - if (header_testname(h, US"X-Spam", 6, TRUE)) ... - - (c) void header_add_at_position(BOOL after, uschar *name, BOOL topnot, - int type, char *format, ...) - - This function adds a new header line at a specified point in the header - chain. If "name" is NULL, the new header is added at the end of the - chain if "after" is TRUE, or at the start if "after" is FALSE. If - "name" is not NULL, the headers are searched for the first non-deleted - header that matches the name. If one is found, the new header is added - before it if "after" is FALSE. If "after" is true, the new header is - added after the found header and any adjacent subsequent ones with the - same name (even if marked "deleted"). If no matching non-deleted header - is found, the "topnot" option controls where the header is added. If it - is TRUE, addition is at the top; otherwise at the bottom. Thus, to add - a header after all the Received: headers, or at the top if there are no - Received: headers, you could use - - header_add_at_position(TRUE, US"Received", TRUE, ' ', "X-xxx: ..."); - - Normally, there is always at least one non-deleted Received: header, - but there may not be if received_header_text expands to an empty - string. - - (d) BOOL receive_remove_recipient(uschar *recipient) - - This is a convenience function to remove a named recipient from the - list of recipients. It returns TRUE if a recipient was removed, and - FALSE if no matching recipient could be found. The argument must be a - complete email address. - - 4. When an ACL "warn" statement adds one or more header lines to a message, - they are added at the end of the existing header lines by default. It is - now possible to specify that any particular header line should be added - right at the start (before all the Received: lines) or immediately after - the first block of Received: lines in the message. This is done by - specifying :at_start: or :after_received: (or, for completeness, :at_end:) - before the text of the header line. (Header text cannot start with a colon, - as there has to be a header name first.) For example: - - warn message = :after_received:X-My-Header: something or other... - - If more than one header is supplied in a single warn statement, each one is - treated independently and can therefore be placed differently. If you add - more than one line at the start, or after the Received: block, they will - end up in reverse order. - - Warning: This facility currently applies only to header lines that are - added in an ACL. It does NOT work for header lines that are added in a - system filter or in a router or transport. - - 5. There is now a new error code that can be used in retry rules. Its name is - "rcpt_4xx", and there are three forms. A literal "rcpt_4xx" matches any 4xx - error received for an outgoing SMTP RCPT command; alternatively, either the - first or both of the x's can be given as digits, for example: "rcpt_45x" or - "rcpt_436". If you want (say) to recognize 452 errors given to RCPT - commands by a particular host, and have only a one-hour retry for them, you - can set up a retry rule of this form: - - the.host.name rcpt_452 F,1h,10m - - Naturally, this rule must come before any others that would match. - - These new errors apply to both outgoing SMTP (the smtp transport) and - outgoing LMTP (either the lmtp transport, or the smtp transport in LMTP - mode). Note, however, that they apply only to responses to RCPT commands. - - 6. The "postmaster" option of the callout feature of address verification has - been extended to make it possible to use a non-empty MAIL FROM address when - checking a postmaster address. The new suboption is called "postmaster_ - mailfrom", and you use it like this: - - require verify = sender/callout=postmaster_mailfrom=abc@x.y.z - - Providing this suboption causes the postmaster check to be done using the - given address. The original "postmaster" option is equivalent to - - require verify = sender/callout=postmaster_mailfrom= - - If both suboptions are present, the rightmost one overrides. - - Important notes: - - (1) If you use a non-empty sender address for postmaster checking, there is - the likelihood that the remote host will itself initiate a callout - check back to your host to check that address. As this is a "normal" - callout check, the sender will most probably be empty, thus avoiding - possible callout loops. However, to be on the safe side it would be - best to set up your own ACLs so that they do not do sender verification - checks when the recipient is the address you use for postmaster callout - checking. - - (2) The caching arrangements for postmaster checking do NOT take account of - the sender address. It is assumed that either the empty address, or a - fixed non-empty address will be used. All that Exim remembers is that - the postmaster check for the domain succeeded or failed. - - 7. When verifying addresses in header lines using the verify=header_sender - option, Exim behaves by default as if the addresses are envelope sender - addresses from a message. Callout verification therefore tests to see - whether a bounce message could be delivered, by using an empty address in - the MAIL FROM command. However, it is arguable that these addresses might - never be used as envelope senders, and could therefore justifiably reject - bounce messages (empty senders). There is now an additional callout option - for verify=header_sender that allows you to specify what address to use in - the MAIL FROM command. You use it as in this example: - - require verify = header_sender/callout=mailfrom=abcd@x.y.z - - Important notes: - - (1) As in the case of postmaster_mailfrom (see above), you should think - about possible loops. - - (2) In this case, as in the case of recipient callouts with non-empty - senders (the use_sender option), caching is done on the basis of a - recipient/sender pair. - - 8. If you build Exim with USE_READLINE=yes in Local/Makefile, it will try to - load libreadline dynamically whenever the -be (test expansion) option is - used without command line arguments. If successful, it will then use - readline() for reading the test data. A line history is supported. By the - time Exim does this, it is running as the calling user, so this should not - cause any security problems. Security is the reason why this is NOT - supported for -bt or -bv, when Exim is running as root or exim, - respectively. Note that this option adds to the size of the Exim binary, - because the dynamic loading library is not otherwise included. On my - desktop it adds about 2.5K. You may need to add -ldl to EXTRA_LIBS when you - set USE_READLINE=yes. - - 9. Added ${str2b64:} to the expansion operators. This operator - converts an arbitrary string into one that is base64 encoded. - -10. A new authenticator, called cyrus_sasl, has been added. This requires - the presence of the Cyrus SASL library; it authenticates by calling this - library, which supports a number of authentication mechanisms, including - PLAIN and LOGIN, but also several others that Exim does not support - directly. The code for this authenticator was provided by Matthew - Byng-Maddick of A L Digital Ltd (http://www.aldigital.co.uk). Here follows - draft documentation: - - xx. THE CYRUS_SASL AUTHENTICATOR - - The cyrus_sasl authenticator provides server support for the Cyrus library - Implementation of the RFC 2222 "Simple Authentication and Security Layer". - It provides a gatewaying mechanism directly to the Cyrus interface, so if - your Cyrus library can do, for example, CRAM-MD5, then so can the - cyrus_sasl authenticator. By default it uses the public name of the driver - to determine which mechanism to support. - - Where access to some kind of secret file is required, for example in GSSAPI - or CRAM-MD5, it is worth noting that the authenticator runs as the exim - user, and that the Cyrus SASL library has no way of escalating privileges - by default. You may also find you need to set environment variables, - depending on the driver you are using. - - xx.1 Using cyrus_sasl as a server - - The cyrus_sasl authenticator has four private options. It puts the username - (on a successful authentication) into $1. - - server_hostname Type: string* Default: $primary_hostname - - This option selects the hostname that is used when communicating with - the library. It is up to the underlying SASL plug-in what it does with - this data. - - server_mech Type: string Default: public_name - - This option selects the authentication mechanism this driver should - use. It allows you to use a different underlying mechanism from the - advertised name. For example: - - sasl: - driver = cyrus_sasl - public_name = X-ANYTHING - server_mech = CRAM-MD5 - server_set_id = $1 - - server_realm Type: string Default: unset - - This is the SASL realm that the server is claiming to be in. - - server_service Type: string Default: "smtp" - - This is the SASL service that the server claims to implement. - - For straigthforward cases, you do not need to set any of the - authenticator's private options. All you need to do is to specify an - appropriate mechanism as the public name. Thus, if you have a SASL library - that supports CRAM-MD5 and PLAIN, you might have two authenticators as - follows: - - sasl_cram_md5: - driver = cyrus_sasl - public_name = CRAM-MD5 - server_set_id = $1 - - sasl_plain: - driver = cyrus_sasl - public_name = PLAIN - server_set_id = $1 - -11. There is a new global option called tls_on_connect_ports. Its value must be - a list of port numbers; the most common use is expected to be - - tls_on_connect_ports = 465 - - Setting this option has the same effect as -tls-on-connect on the command - line, but only for the specified ports. It applies to all connections, both - via the daemon and via inetd. You still need to specify all the ports for - the daemon (using daemon_smtp_ports or local_interfaces or the -X command - line option) because this option does not add an extra port -- rather, it - specifies different behaviour on a port that is defined elsewhere. The - -tls-on-connect command line option overrides tls_on_connect_ports, and - forces tls-on-connect for all ports. - -12. There is a new ACL that is run when a DATA command is received, before the - data itself is received. The ACL is defined by acl_smtp_predata. (Compare - acl_smtp_data, which is run after the data has been received.) - This new ACL allows a negative response to be given to the DATA command - itself. Header lines added by MAIL or RCPT ACLs are not visible at this - time, but any that are defined here are visible when the acl_smtp_data ACL - is run. - -13. The "control=submission" ACL modifier has an option "/domain=xxx" which - specifies the domain to be used when creating From: or Sender: lines using - the authenticated id as a local part. If the option is supplied with an - empty domain, that is, just "/domain=", Exim assumes that the authenticated - id is a complete email address, and it uses it as is when creating From: - or Sender: lines. - -14. It is now possible to make retry rules that apply only when the failing - message has a specific sender. In particular, this can be used to define - retry rules that apply only to bounce messages. The syntax is to add a new - third item to a retry rule, of the form "senders=
". The retry - timings themselves then become the fourth item. For example: - - * * senders=: F,1h,30m - - would match all bounce messages. If the address list contains white space, - it must be enclosed in quotes. For example: - - a.domain timeout senders="x@b.dom : y@c.dom" G,8h,10m,1.5 - - When testing retry rules using -brt, you can supply a sender using the -f - command line option, like this: - - exim -f "" -brt user@dom.ain - - If you do not set -f with -brt, a retry rule that contains a senders list - will never be matched. - -15. Two new control modifiers have been added to ACLs: "control = enforce_sync" - and "control = no_enforce_sync". This makes it possible to be selective - about when SMTP synchronization is enforced. The global option - smtp_enforce_sync now specifies the default state of the switch. These - controls can appear in any ACL, but the most obvious place to put them is - in the ACL defined by acl_smtp_connect, which is run at the start of an - incoming SMTP connection, before the first synchronization check. - -16. Another two new control modifiers are "control = caseful_local_part" and - "control = caselower_local_part". These are permitted only in the ACL - specified by acl_smtp_rcpt (i.e. during RCPT processing). By default, the - contents of $local_part are lower cased before ACL processing. - After "control = caseful_local_part", any uppercase letters in the original - local part are restored in $local_part for the rest of the ACL, or until - "control = caselower_local_part" is encountered. However, this applies only - to local part handling that takes place directly in the ACL (for example, - as a key in lookups). If a "verify = recipient" test is obeyed, the - case-related handling of the local part during the verification is - controlled by the router configuration (see the caseful_local_part generic - router option). - - This facility could be used, for example, to add a spam score to local - parts containing upper case letters. For example, using $acl_m4 to - accumulate the spam score: - - warn control = caseful_local_part - set acl_m4 = ${eval:\ - $acl_m4 + \ - ${if match{$local_part}{[A-Z]}{1}{0}}\ - } - control = caselower_local_part - - Notice that we put back the lower cased version afterwards, assuming that - is what is wanted for subsequent tests. - -17. The option hosts_connection_nolog is provided so that certain hosts can be - excepted from logging when the +smtp_connection log selector is set. For - example, you might want not to log SMTP connections from local processes, - or from 127.0.0.1, or from your local LAN. The option is a host list with - an unset default. Because it is consulted in the main loop of the daemon, - you should strive to restrict its value to a short inline list of IP - addresses and networks. To disable logging SMTP connections from local - processes, you must create a host list with an empty item. For example: - - hosts_connection_nolog = : - - If the +smtp_connection log selector is not set, this option has no effect. - -18. There is now an acl called acl_smtp_quit, which is run for the QUIT - command. The outcome of the ACL does not affect the response code to QUIT, - which is always 221. Thus, the ACL does not in fact control any access. - For this reason, the only verbs that are permitted are "accept" and "warn". - - The ACL can be used for tasks such as custom logging at the end of an SMTP - session. For example, you can use ACL variables in other ACLs to count - messages, recipients, etc., and log the totals at QUIT time using one or - more "logwrite" modifiers on a "warn" command. - - You do not need to have a final "accept", but if you do, you can use a - "message" modifier to specify custom text that is sent as part of the 221 - response. - - This ACL is run only for a "normal" QUIT. For certain kinds of disastrous - failure (for example, failure to open a log file, or when Exim is bombing - out because it has detected an unrecoverable error), all SMTP commands - from the client are given temporary error responses until QUIT is received - or the connection is closed. In these special cases, the ACL is not run. - -19. The appendfile transport has two new options, mailbox_size and mailbox_ - filecount. If either these options are set, it is expanded, and the result - is taken as the current size of the mailbox or the number of files in the - mailbox, respectively. This makes it possible to use some external means of - maintaining the data about the size of a mailbox for enforcing quota - limits. The result of expanding these option values must be a decimal - number, optionally followed by "K" or "M". - -20. It seems that there are broken clients in use that cannot handle multiline - SMTP responses. Can't people who implement these braindead programs read? - RFC 821 mentions multiline responses, and it is over 20 years old. They - must handle multiline responses for EHLO, or do they still use HELO? - Anyway, here is YAWFAB (yet another workaround for asinine brokenness). - There's a new ACL switch that can be set by - - control = no_multiline_responses - - If this is set, it suppresses multiline SMTP responses from ACL rejections. - One way of doing this would have been just to put out these responses as - one long line. However, RFC 2821 specifies a maximum of 512 bytes per - response ("use multiline responses for more" it says), and some of the - responses might get close to that. So I have implemented this by doing two - very easy things: - - (1) Extra information that is normally output as part of a rejection - caused by sender verification failure is omitted. Only the final line - (typically "sender verification failed") is now sent. - - (2) If a "message" modifier supplies a multiline response, only the first - line is output. - - The setting of the switch can, of course, be made conditional on the - calling host. - -21. There is now support for the libradius library that comes with FreeBSD. - This is an alternative to the radiusclient library that Exim already - supports. To use the FreeBSD library, you need to set - - RADIUS_LIB_TYPE=RADLIB - - in Local/Makefile, in addition to RADIUS_CONFIGURE_FILE, and you probably - also need -libradius in EXTRALIBS. - - -Version 4.42 ------------- + The "prvscheck" expansion expands to the empty string if
+ is not a SYNTACTICALLY valid "prvs"-scheme address. Otherwise, + argument 3 defines what "prvscheck" expands to: If argument 3 + is the empty string, "prvscheck" expands to the decoded version + of the address (no matter if it is CRYPTOGRAPHICALLY valid or not). + If argument 3 expands to a non-empty string, "prvscheck" expands + to that string. - 1. The "personal" filter test is brought up-to-date with recommendations from - the Sieve specification: (a) The list of non-personal From: addresses now - includes "listserv", "majordomo", and "*-request"; (b) If the message - contains any header line starting with "List=-" it is treated as - non-personal. - 2. The Sieve functionality has been extended to support the "copy" and - "vacation" extensions, and comparison tests. + Usage example + ------------- - 3. There is now an overall timeout for performing a callout verification. It - defaults to 4 times the callout timeout, which applies to individual SMTP - commands during the callout. The overall timeout applies when there is more - than one host that can be tried. The timeout is checked before trying the - next host. This prevents very long delays if there are a large number of - hosts and all are timing out (e.g. when the network connections are timing - out). The value of the overall timeout can be changed by specifying an - additional sub-option for "callout", called "maxwait". For example: + Macro: - verify = sender/callout=5s,maxwait=20s + PRVSCHECK_SQL = ${lookup mysql{SELECT secret FROM batv_prvs WHERE \ + sender='${quote_mysql:$prvscheck_address}'}{$value}} - 4. Changes to the "personal" filter test: + RCPT ACL: - (1) The list of non-personal local parts in From: addresses has been - extended to include "listserv", "majordomo", "*-request", and "owner-*", - taken from the Sieve specification recommendations. + # Bounces: drop unsigned addresses for BATV senders + deny message = This address does not send an unsigned reverse path. + senders = : + recipients = +batv_recipients - (2) If the message contains any header line starting with "List-" it is - treated as non-personal. + # Bounces: In case of prvs-signed address, check signature. + deny message = Invalid reverse path signature. + senders = : + condition = ${prvscheck {$local_part@$domain}{PRVSCHECK_SQL}{1}} + !condition = $prvscheck_result - (3) The test for "circular" in the Subject: header line has been removed - because it now seems ill-conceived. + Top-Level Router: - 5. The autoreply transport has a new option called never_mail. This is an - address list. If any run of the transport creates a message with a - recipient that matches any item in the list, that recipient is quietly - discarded. If all recipients are discarded, no message is created. + batv_redirect: + driver = redirect + data = ${prvscheck {$local_part@$domain}{PRVSCHECK_SQL}{}} + Transport (referenced by router that makes decision if + BATV is applicable): -Version 4.40 ------------- + external_smtp_batv: + driver = smtp + return_path = ${prvs {$return_path} \ + {${lookup mysql{SELECT \ + secret FROM batv_prvs WHERE \ + sender='${quote_mysql:$sender_address}'} \ + {$value}fail}}} -The documentation is up-to-date for the 4.40 release. What follows here is a -brief list of the new features that have been added since 4.30. +PH/04 There are two new options that control the retrying done by the daemon + at startup when it cannot immediately bind a socket (typically because + the socket is already in use). The default values reproduce what were + built-in constants previously: daemon_startup_retries defines the number + of retries after the first failure (default 9); daemon_startup_sleep + defines the length of time to wait between retries (default 30s). - 1. log_incoming_interface affects more log lines. +PH/05 There is now a new ${if condition called "match_ip". It is similar to + match_domain, etc. It must be followed by two argument strings. The first + (after expansion) must be an IP address or an empty string. The second + (after expansion) is a restricted host list that can match only an IP + address, not a host name. For example: - 2. New ACL modifier "control = submission". + ${if match_ip{$sender_host_address}{1.2.3.4:5.6.7.8}{...}{...}} - 3. CONFIGURE_OWNER can be set at build time to define an alternative owner for - the configuration file, in addition to root and exim. + The specific types of host list item that are permitted in the list are + shown below. Consult the manual section on host lists for further + details. - 4. Added expansion variables $body_zerocount, $recipient_data, and - $sender_data. + . An IP address, optionally with a CIDR mask. - 5. The time of last modification of the "new" subdirectory is now used as the - "mailbox time last read" when there is a quota error for a maildir - delivery. + . A single asterisk matches any IP address. - 6. The special item "+ignore_unknown" may now appear in host lists. + . An empty item matches only if the IP address is empty. This could be + useful for testing for a locally submitted message or one from specific + hosts in a single test such as - 7. The special domain-matching patterns @mx_any, @mx_primary, and - @mx_secondary can now be followed by "/ignore=". + ${if match_ip{$sender_host_address}{:4.3.2.1:...}{...}{...}} - 8. New expansion conditions: match_domain, match_address, match_local_part, - lt, lti, le, lei, gt, gti, ge, and new expansion operators time_interval, - eval10, and base62d. + where the first item in the list is the empty string. - 9. New lookup type called "iplsearch". + . The item @[] matches any of the local host's interface addresses. -10. New log selectors ident_timeout, tls_certificate_verified, queue_time, - deliver_time, outgoing_port, return_path_on_delivery. + . Lookups are assumed to be "net-" style lookups, even if "net-" is not + specified. Thus, the following are equivalent: -11. New global options smtp_active_hostname and tls_require_ciphers. + ${if match_ip{$sender_host_address}{lsearch;/some/file}... + ${if match_ip{$sender_host_address}{net-lsearch;/some/file}... -12. Exinext has -C and -D options. + You do need to specify the "net-" prefix if you want to specify a + specific address mask, for example, by using "net24-". -13. "domainlist_cache" forces caching of an apparently variable list. +PH/06 The "+all" debug selector used to set the flags for all possible output; + it is something that people tend to use semi-automatically when + generating debug output for me or for the list. However, by including + "+memory", an awful lot of output that is very rarely of interest was + generated. I have changed this so that "+all" no longer includes + "+memory". However, "-all" still turns everything off. + + +Version 4.51 +------------ -14. For compatibility with Sendmail, the command line option -prval:sval - is equivalent to -oMr rval -oMs sval. +PH/01 The format in which GnuTLS parameters are written to the gnutls-param + file in the spool directory has been changed. This change has been made + to alleviate problems that some people had with the generation of the + parameters by Exim when /dev/random was exhausted. In this situation, + Exim would hang until /dev/random acquired some more entropy. -15. New callout options use_sender and use_postmaster for use when verifying - recipients. + The new code exports and imports the DH and RSA parameters in PEM + format. This means that the parameters can be generated externally using + the certtool command that is part of GnuTLS. -16. John Jetmore's "exipick" utility has been added to the distribution. + To replace the parameters with new ones, instead of deleting the file + and letting Exim re-create it, you can generate new parameters using + certtool and, when this has been done, replace Exim's cache file by + renaming. The relevant commands are something like this: -17. The TLS code now supports CRLs. + # rm -f new.params + # touch new.params + # chown exim:exim new.params + # chmod 0400 new.params + # certtool --generate-privkey --bits 512 >new.params + # echo "" >>new.params + # certtool --generate-dh-params --bits 1024 >> new.params + # mv new.params params -18. The dnslookup router and the dnsdb lookup type now support the use of SRV - records. + If Exim never has to generate the parameters itself, the possibility of + stalling is removed. -19. The redirect router has a new option called qualify_domain. +PH/02 A new expansion item for dynamically loading and calling a locally- + written C function is now provided, if Exim is compiled with -20. exigrep's output now also includes lines that are not related to any - particular message, but which do match the pattern. + EXPAND_DLFUNC=yes + + set in Local/Makefile. The facility is not included by default (a + suitable error is given if you try to use it when it is not there.) + + If you enable EXPAND_DLFUNC, you should also be aware of the new redirect + router option forbid_filter_dlfunc. If you have unprivileged users on + your system who are permitted to create filter files, you might want to + set forbid_filter_dlfunc=true in the appropriate router, to stop them + using ${dlfunc to run code within Exim. + + You load and call an external function like this: + + ${dlfunc{/some/file}{function}{arg1}{arg2}...} + + Once loaded, Exim remembers the dynamically loaded object so that it + doesn't reload the same object file in the same Exim process (but of + course Exim does start new processes frequently). + + There may be from zero to eight arguments to the function. When compiling + a local function that is to be called in this way, local_scan.h should be + included. The Exim variables and functions that are defined by that API + are also available for dynamically loaded functions. The function itself + must have the following type: + + int dlfunction(uschar **yield, int argc, uschar *argv[]) + + Where "uschar" is a typedef for "unsigned char" in local_scan.h. The + function should return one of the following values: + + OK Success. The string that is placed in "yield" is put into + the expanded string that is being built. + + FAIL A non-forced expansion failure occurs, with the error + message taken from "yield", if it is set. + + FAIL_FORCED A forced expansion failure occurs, with the error message + taken from "yield" if it is set. + + ERROR Same as FAIL, except that a panic log entry is written. + + When compiling a function that is to be used in this way with gcc, + you need to add -shared to the gcc command. Also, in the Exim build-time + configuration, you must add -export-dynamic to EXTRALIBS. + +TF/01 $received_time is a new expansion variable containing the time and date + as a number of seconds since the start of the Unix epoch when the + current message was received. + +PH/03 There is a new value for RADIUS_LIB_TYPE that can be set in + Local/Makefile. It is RADIUSCLIENTNEW, and it requests that the new API, + in use from radiusclient 0.4.0 onwards, be used. It does not appear to be + possible to detect the different versions automatically. + +PH/04 There is a new option called acl_not_smtp_mime that allows you to scan + MIME parts in non-SMTP messages. It operates in exactly the same way as + acl_smtp_mime + +PH/05 It is now possible to redefine a macro within the configuration file. + The macro must have been previously defined within the configuration (or + an included file). A definition on the command line using the -D option + causes all definitions and redefinitions within the file to be ignored. + In other words, -D overrides any values that are set in the file. + Redefinition is specified by using '==' instead of '='. For example: + + MAC1 = initial value + ... + MAC1 == updated value + + Redefinition does not alter the order in which the macros are applied to + the subsequent lines of the configuration file. It is still the same + order in which the macros were originally defined. All that changes is + the macro's value. Redefinition makes it possible to accumulate values. + For example: + + MAC1 = initial value + ... + MAC1 == MAC1 and something added + + This can be helpful in situations where the configuration file is built + from a number of other files. + +PH/06 Macros may now be defined or redefined between router, transport, + authenticator, or ACL definitions, as well as in the main part of the + configuration. They may not, however, be changed within an individual + driver or ACL, or in the local_scan, retry, or rewrite sections of the + configuration. + +PH/07 $acl_verify_message is now set immediately after the failure of a + verification in an ACL, and so is available in subsequent modifiers. In + particular, the message can be preserved by coding like this: + + warn !verify = sender + set acl_m0 = $acl_verify_message + + Previously, $acl_verify_message was set only while expanding "message" + and "log_message" when a very denied access. + +PH/08 The redirect router has two new options, sieve_useraddress and + sieve_subaddress. These are passed to a Sieve filter to specify the :user + and :subaddress parts of an address. Both options are unset by default. + However, when a Sieve filter is run, if sieve_useraddress is unset, the + entire original local part (including any prefix or suffix) is used for + :user. An unset subaddress is treated as an empty subaddress. + +PH/09 Quota values can be followed by G as well as K and M. + +PH/10 $message_linecount is a new variable that contains the total number of + lines in the header and body of the message. Compare $body_linecount, + which is the count for the body only. During the DATA and + content-scanning ACLs, $message_linecount contains the number of lines + received. Before delivery happens (that is, before filters, routers, and + transports run) the count is increased to include the Received: header + line that Exim standardly adds, and also any other header lines that are + added by ACLs. The blank line that separates the message header from the + body is not counted. Here is an example of the use of this variable in a + DATA ACL: + + deny message = Too many lines in message header + condition = \ + ${if <{250}{${eval: $message_linecount - $body_linecount}}} + + In the MAIL and RCPT ACLs, the value is zero because at that stage the + message has not yet been received. + +PH/11 In a ${run expansion, the variable $value (which contains the standard + output) is now also usable in the "else" string. + +PH/12 In a pipe transport, although a timeout while waiting for the pipe + process to complete was treated as a delivery failure, a timeout while + writing the message to the pipe was logged, but erroneously treated as a + successful delivery. Such timeouts include transport filter timeouts. For + consistency with the overall process timeout, these timeouts are now + treated as errors, giving rise to delivery failures by default. However, + there is now a new Boolean option for the pipe transport called + timeout_defer, which, if set TRUE, converts the failures into defers for + both kinds of timeout. A transport filter timeout is now identified in + the log output. + + +Version 4.50 +------------ -21. New global option write_rejectlog. If it is set false, Exim no longer - writes anything to the reject log. +The documentation is up-to-date for the 4.50 release. ****