X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/5bb1dfe41e40fa45f85305ccbd7d4533a229d3fc..2bb42e2899db219f4a598530b43e06b1b977a81e:/test/runtest diff --git a/test/runtest b/test/runtest index d205f9509..70499312d 100755 --- a/test/runtest +++ b/test/runtest @@ -383,7 +383,7 @@ $date = "\\d{2}-\\w{3}-\\d{4}\\s\\d{2}:\\d{2}:\\d{2}"; # Debug time & pid -$time_pid = "(?:\\d{2}:\\d{2}:\\d{2}\\s+\\d+\\s)"; +$time_pid = "(?:(?:\\d{2}:\\d{2}:\\d{2}\\s+)?\\d+\\s)"; # Pattern for matching pids at start of stderr lines; initially something # that won't match. @@ -469,7 +469,7 @@ RESET_AFTER_EXTRA_LINE_READ: s/forced fail after \d seconds/forced fail after d seconds/; # This message may contain a different DBM library name - s/Failed to open \S+( \([^\)]+\))? file/Failed to open DBM file/; + s/Failed to open \S+( \([^\)]+\))? file/Failed to open hintsdb file/; # The message for a non-listening FIFO varies s/:[^:]+: while opening named pipe/: Error: while opening named pipe/; @@ -495,8 +495,10 @@ RESET_AFTER_EXTRA_LINE_READ: my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4); $expired = '' if !defined $expired; - # Round the time-difference up to nearest even value - my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1; + # Make time-difference minimum 2, and rounded up to even value + my($increment) = date_seconds($date3) - date_seconds($date2) + 1; + $increment = 2 if ($increment == 0); + $increment = ($increment >> 1) << 1; # We used to use globally unique replacement values, but timing # differences make this impossible. Just show the increment on the @@ -575,13 +577,13 @@ RESET_AFTER_EXTRA_LINE_READ: s/\d\d-\w\w\w-\d\d\d\d\s\d\d:\d\d:\d\d\s[-+]\d\d\d\d,/06-Sep-1999 15:52:48 +0100,/gx; # Dates/times in debugging output for writing retry records - if (/^ first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/) + if (/^(.+)first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/) { - my($next) = $3 - $2; - $_ = " first failed=dddd last try=dddd next try=+$next $4\n"; + my($next) = $4 - $3; + $_ = "$1first failed=dddd last try=dddd next try=+$next $5\n"; } - s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/; - s/^(\s*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/; + s/^(.*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/; + s/^(.*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/; # Time to retry may vary s/time to retry = \S+/time to retry = tttt/; @@ -963,8 +965,12 @@ RESET_AFTER_EXTRA_LINE_READ: s/(TLS error on connection from .* \(SSL_\w+\): error:)(.*)/$1 <>/; next if /SSL verify error: depth=0 error=certificate not trusted/; + # OpenSSL 3.2.1 # OpenSSL 3.0.0 - s/TLS error \(D-H param setting .* error:\K.*dh key too small/xxxxxxxx:SSL routines::dh key too small/; + s/TLS\ error\ \(D-H\ param\ setting\ .*\ error:\K + .* + (?:dh\ key\ too\ small|unknown\ security\ bits) + /xxxxxxxx:SSL routines::dh key too small/x; # OpenSSL 1.1.1 s/error:\K0B080074:x509 certificate routines:X509_check_private_key(?=:key values mismatch$)/05800074:x509 certificate routines:/; @@ -1056,7 +1062,7 @@ RESET_AFTER_EXTRA_LINE_READ: s/^(Connection request from) \[.*:.*:.*\]$/$1 \[ipv6\]/; # Hints DB use of lockfiles is provider-dependent - s/Failed to open \K(?:DBM|database lock) file (.*\/spool\/db\/[^.]*)(?:.lockfile)?(?=(?: for reading)?: No such file or directory$)/hintsdb $1/; + s/Failed to open \K(?:hintsdb|database lock) file (.*\/spool\/db\/[^. ]*)(?:.lockfile)?(?: for reading)?(?=: No such file or directory$)/hintsdb $1/; # openssl version variances # Error lines on stdout from SSL contain process id values and file names. @@ -1067,10 +1073,23 @@ RESET_AFTER_EXTRA_LINE_READ: next if /SSL verify error: depth=0 error=certificate not trusted/; s/SSL3_READ_BYTES/ssl3_read_bytes/i; s/CONNECT_CR_FINISHED/ssl3_read_bytes/i; - s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/; + s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)? + (:SSL\ routines:ssl3_read_bytes:) + ssl(?:v3|\/tls) + ([^:]+:) + .* + (:SSL\ alert\ number\ \d\d)$ + /pppp:error:dddddddd$1sslv3$2\[...\]$3/x; s/^error:\K[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/dddddddd:$1/; s/^error:\K[[:xdigit:]]+:SSL routines::(tlsv13 alert certificate required)$/dddddddd:SSL routines:ssl3_read_bytes:$1/; - s/^error:\K[[:xdigit:]]+:SSL routines::((tlsv1|sslv3) alert (unknown ca|certificate revoked))$/dddddddd:SSL routines:ssl3_read_bytes:$1/; + s/^error:\K + [[:xdigit:]]+:SSL\ routines:: + ((?:tlsv1|sslv3)\ alert\ (?:unknown\ ca|certificate\ revoked))$ + /dddddddd:SSL routines:ssl3_read_bytes:$1/x; + s/^error:\K + [[:xdigit:]]+:SSL\ routines:: + ssl\/tls\ (alert\ (?:unknown\ ca|certificate\ revoked))$ + /dddddddd:SSL routines:ssl3_read_bytes:sslv3 $1/x; # gnutls version variances next if /^Error in the pull function./; @@ -1141,11 +1160,11 @@ RESET_AFTER_EXTRA_LINE_READ: (?: .*\sBerkeley\ DB | \sProbably\ (?:Berkeley\ DB|ndbm|GDBM) | \sUsing\ (?:tdb|sqlite3) - | Authenticators: + | Authenticators\ \((?:built-in|dynamic)\): | Lookups(?:\(built-in\))?: | Support\ for: - | Routers: - | Transports: + | Routers\ \((?:built-in|dynamic)\): + | Transports\ \((?:built-in|dynamic)\): | Malware: | log\ selectors\ = | cwd= @@ -1159,9 +1178,36 @@ RESET_AFTER_EXTRA_LINE_READ: next if /lock(?:ing|ed) .*\/spool\/db\/[^.]+\.lockfile$/; s/closed hints database\K and lockfile$//; + # Hints DBs with transactions are provider-dependent, and flow changes + # to take advantage of them need different opens and different flags. + # Drop all the debug output for opens and closes. + if (/EXIM_DBOPEN(_MULTI)?: file <.*spool\/db\/retry>/) + { + $_ = ; + next if (/returned from EXIM_DBOPEN(_MULTI)?: 0x[[:xdigit:]]+$/); + $_ = ; + if (/returned from EXIM_DBOPEN(_MULTI)?: \(nil\)$/); + next; + } + if (/EXIM_DBCLOSE(_MULTI)?/) { ; next; } + next if /retaining retry hintsdb handle$/; + next if /using cached retry hintsdb (?:handle|nonpresence)$/; + if (/final close of cached retry db$/) { ; ; next; } + next if /dbfn_transaction_(?:start|commit)$/; + + # Various hintsdb backends + s/(?:bdb|tdb|gdbm|ndbm|sqlite) + _open\(flags\ 0x(\d) + \ mode\ 0640\) + \ (?:No\ such\ file\ or\ directory|unable\ to\ open\ database\ file)$ + /hintsdb_open(flags 0x$1 mode 0640) No such file or directory/x; + # Lines with a leading pid. Only handle >= 4-digit PIDs to avoid converting SMTP respose codes s/^\s*(\d{4,})\s(?!(?:previous message|in\s|bytes remain in|SMTP accept process running))/new_value($1, "p%s", \$next_pid) . ' '/e; + # Connection IDs + s/connection_id: \K(\d+)$/new_value($1, "conn%s", \$next_conn)/e; + # Debugging lines for Exim terminations and process-generation next if /(?:postfork: | fork(?:ing|ed) for )/; @@ -1188,7 +1234,7 @@ RESET_AFTER_EXTRA_LINE_READ: # Lookups have a char which depends on the number of lookup types compiled in, # in stderr output. Replace with a "0". Recognising this while avoiding # other output is fragile; perhaps the debug output should be revised instead. - s%^\s+(:?closing )?\K[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g; + s%^\s+(?:closing )?\K[0-Z]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g; # drop gnutls version strings next if /GnuTLS compile-time version: \d+[\.\d]+$/; @@ -1251,10 +1297,16 @@ RESET_AFTER_EXTRA_LINE_READ: next if /^tls_set_watch\(\) fail on '\/usr\/(?:lib\/ssl|local\/openssl3\/etc\/pki\/tls)\/cert.pem': No such file or directory$/; # drop lookups - next if /^$time_pid?(?: Lookups\ \(built-in\): - | Loading\ lookup\ modules\ from - | Loaded\ \d+\ lookup\ modules - | Total\ \d+\ lookups)/x; + next if /(?: Lookups\ \((?:built-in|dynamic)\): + | searchtype\ \w+\ not\ initially\ found + | Loaded\ "\w+"\ \(\d+\ lookup\ types?\) + | Loading\ lookup\ modules\ from + | Loaded\ \d+\ lookup\ modules + | Total\ \d+\ built-in\ lookups)/x; + + # drop loads of dyn-module drivers + next if /^$time_pid?(?:Loading\ \w+\ (?:router|transport|auth)\ driver\ from + | Loaded\ \w+\ (?:router|transport|auth)$)/x; # drop compiler information next if /^$time_pid?Compiler:/; @@ -1263,11 +1315,14 @@ RESET_AFTER_EXTRA_LINE_READ: # different libraries will have different numbers (possibly 0) of follow-up # lines, indenting with more data if (/^$time_pid?Library version:/) { - while (1) { + $_ = ; + if (/^$time_pid?\s/) { $_ = ; - next if /^$time_pid?\s/; - goto RESET_AFTER_EXTRA_LINE_READ; + if (/^$time_pid?\s/) { + $_ = ; + } } + goto RESET_AFTER_EXTRA_LINE_READ; } # drop other build-time controls emitted for debugging @@ -1348,6 +1403,10 @@ RESET_AFTER_EXTRA_LINE_READ: next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?) \sno\s\((option\sunset|end\sof\slist)\)/x; + # non-TLS builds cannot have DANE + + next if /lack of DNSSEC traceability precludes DANE$/; + # Skip auxiliary group lists because they will vary. next if /auxiliary group list:/; @@ -1367,19 +1426,6 @@ RESET_AFTER_EXTRA_LINE_READ: next if /failed to load readline:/; - # Some DBM libraries seem to make DBM files on opening with O_RDWR without - # O_CREAT; other's don't. In the latter case there is some debugging output - # which is not present in the former. Skip the relevant lines (there are - # three of them). - - if (/returned from EXIM_DBOPEN: \(nil\)/) - { - $_ .= ; - s?\Q$parm_cwd\E?TESTSUITE?g; - if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/) - { $_ = ; next; } - } - # Some tests turn on +expand debugging to check on expansions. # Unfortunately, the Received: expansion varies, depending on whether TLS # is compiled or not. So we must remove the relevant debugging if it is. @@ -1429,11 +1475,23 @@ RESET_AFTER_EXTRA_LINE_READ: } # Different builds will have different lookup types included - s/search_type \K\d+ \((\w+)\) quoting -1 \(none\)$/NN ($1) quoting -1 (none)/; # and different numbers of lookup types result in different type-code letters, # so convert them all to "0" s%(?> Body data for hash, canonicalized/; # Not all platforms build with SPF enabled - next if /(^spf_conn_init|^SPF_dns_exim_new|spf_compile\.c)/; + next if /(^$time_pid?spf_conn_init|spf_compile\.c)/; next if /try option spf_smtp_comment_template$/; + next if /loading module '(?:dmarc|spf)'$/; + next if /^$time_pid?Loaded "(?:dmarc|spf)"$/; # Not all platforms have sendfile support next if /^cannot use sendfile for body: no support$/; @@ -1559,8 +1610,8 @@ RESET_AFTER_EXTRA_LINE_READ: } # Specific pointer values reported for DB operations change from run to run - s/^(\s*returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/; - s/^(\s*EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/; + s/(returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/; + s/(EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/; # Platform-dependent output during MySQL startup next if /PerconaFT file system space/; @@ -2470,7 +2521,7 @@ if ($debug) { printf ">> $_\n"; } ################### # The "dbmbuild" command runs exim_dbmbuild. This is used both to test the -# utility and to make DBM files for testing DBM lookups. +# utility and to make hintsdb files for testing hintsdb lookups. if (/^dbmbuild\s+(\S+)\s+(\S+)/) { @@ -2483,7 +2534,7 @@ if (/^dbmbuild\s+(\S+)\s+(\S+)/) # The "dump" command runs exim_dumpdb. On different systems, the output for # some types of dump may appear in a different order because it's just hauled -# out of the DBM file. We can solve this by sorting. Ignore the leading +# out of the hintsdb file. We can solve this by sorting. Ignore the leading # date/time, as it will be flattened later during munging. if (/^dump\s+(\S+)/) @@ -3686,41 +3737,46 @@ while () %parm_support = @temp; } - elsif (/^Lookups \(built-in\): (.*)/) + elsif (/^Lookups \((?:built-in|dynamic)\): ?(.*)/) { print; @temp = split /(\s+)/, $1; push(@temp, ' '); - %parm_lookups = @temp; + my %temp_lookups = @temp; + @parm_lookups{keys %temp_lookups} = values %temp_lookups; } - elsif (/^Authenticators: (.*)/) + elsif (/^Authenticators \((?:built-in|dynamic)\): ?(.*)/) { print; @temp = split /(\s+)/, $1; push(@temp, ' '); - %parm_authenticators = @temp; + my %temp_auths= @temp; + @parm_authenticators{keys %temp_auths} = values %temp_auths; } - elsif (/^Routers: (.*)/) + elsif (/^Routers \((?:built-in|dynamic)\): ?(.*)/) { print; @temp = split /(\s+)/, $1; push(@temp, ' '); - %parm_routers = @temp; + my %temp_routers = @temp; + @parm_routers{keys %temp_routers} = values %temp_routers; } # Some transports have options, e.g. appendfile/maildir. For those, ensure # that the basic transport name is set, and then the name with each of the # options. - elsif (/^Transports: (.*)/) + elsif (/^Transports \((?:built-in|dynamic)\): (.*)/) { print; @temp = split /(\s+)/, $1; my($i,$k); push(@temp, ' '); - %parm_transports = @temp; + my %temp_transports = @temp; + @parm_transports{keys %temp_transports} = values %temp_transports; + foreach $k (keys %parm_transports) { if ($k =~ "/") @@ -4090,6 +4146,17 @@ system("sudo cp eximdir/exim eximdir/exim_exim;" . "sudo chgrp $parm_eximgroup eximdir/exim_exim;" . "sudo chmod 06755 eximdir/exim_exim"); +# Copy any libraries that were built for dynamic load +# Currently this is only for lookup methods + +($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?; + +while (my $file = glob("$parm_exim_dir/dynmodules/*.so")) { + my $base = basename($file); + cp("$file", "eximdir/"); + system("sudo chmod 755 eximdir/$base"); + } + ################################################## # Make copies of utilities we might need # ################################################## @@ -4097,8 +4164,6 @@ system("sudo cp eximdir/exim eximdir/exim_exim;" . # Certain of the tests make use of some of Exim's utilities. We do not need # to be root to copy these. -($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?; - $dbm_build_deleted = 0; if (defined $parm_lookups{dbm} && not cp("$parm_exim_dir/exim_dbmbuild", "eximdir/exim_dbmbuild")) { @@ -4570,6 +4635,7 @@ foreach $test (@test_list) $next_msgid = "aX"; $next_pid = 1234; $next_port = 1111; + $next_conn = 1111; $message_skip = 0; $msglog_skip = 0; $munge_skip = 0;