X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/57233af5f91cdca9a0232a71fab2d12a538cb1a6..09ae8f9f555a3cfe7c2887d920279d41fb88879c:/doc/doc-txt/experimental-spec.txt

diff --git a/doc/doc-txt/experimental-spec.txt b/doc/doc-txt/experimental-spec.txt
index 385f0526e..2395267e8 100644
--- a/doc/doc-txt/experimental-spec.txt
+++ b/doc/doc-txt/experimental-spec.txt
@@ -92,10 +92,25 @@ is requested and required for the connection to proceed.  The host(s)
 should also be in "hosts_require_tls", and "tls_verify_certificates"
 configured for the transport.
 
+For the client to be able to verify the stapled OCSP the server must
+also supply, in its stapled information, any intermediate
+certificates for the chain leading to the OCSP proof from the signer
+of the server certificate.  There may be zero or one such. These
+intermediate certificates should be added to the server OCSP stapling
+file (named by tls_ocsp_file).
+
 At this point in time, we're gathering feedback on use, to determine if
 it's worth adding complexity to the Exim daemon to periodically re-fetch
 OCSP files and somehow handling multiple files.
 
+  A helper script "ocsp_fetch.pl" for fetching a proof from a CA
+  OCSP server is supplied.  The server URL may be included in the
+  server certificate, if the CA is helpful.
+
+  One fail mode seen was the OCSP Signer cert expiring before the end
+  of vailidity of the OCSP proof. The checking done by Exim/OpenSSL
+  noted this as invalid overall, but the re-fetch script did not.
+
 
 
 
@@ -437,12 +452,14 @@ which the spf condition should succeed. Valid strings are:
               This means the queried domain has published
               a SPF record, but wants to allow outside
               servers to send mail under its domain as well.
-  o err_perm  This indicates a syntax error in the SPF
-              record of the queried domain. This should be
-              treated like "none".
-  o err_temp  This indicates a temporary error during all
+              This should be treated like "none".
+  o permerror This indicates a syntax error in the SPF
+              record of the queried domain. You may deny
+              messages when this occurs. (Changed in 4.83)
+  o temperror This indicates a temporary error during all
               processing, including Exim's SPF processing.
               You may defer messages when this occurs.
+              (Changed in 4.83)
 
 You can prefix each string with an exclamation mark to  invert
 is meaning,  for example  "!fail" will  match all  results but
@@ -495,8 +512,8 @@ variables.
 
   $spf_result
   This contains the outcome of the SPF check in string form,
-  one of pass, fail, softfail, none, neutral, err_perm or
-  err_temp.
+  one of pass, fail, softfail, none, neutral, permerror or
+  temperror.
 
   $spf_smtp_comment
   This contains a string that can be used in a SMTP response
@@ -627,6 +644,492 @@ mout.gmx.net                    212.227.15.16
 
 Use a reasonable IP. eg. one the sending cluster acutally uses.
 
+DMARC Support
+--------------------------------------------------------------
+
+DMARC combines feedback from SPF, DKIM, and header From: in order
+to attempt to provide better indicators of the authenticity of an
+email.  This document does not explain the fundamentals, you
+should read and understand how it works by visiting the website at
+http://www.dmarc.org/.
+
+DMARC support is added via the libopendmarc library.  Visit:
+
+  http://sourceforge.net/projects/opendmarc/
+
+to obtain a copy, or find it in your favorite rpm package
+repository.  If building from source, this description assumes
+that headers will be in /usr/local/include, and that the libraries
+are in /usr/local/lib.
+
+1. To compile Exim with DMARC support, you must first enable SPF.
+Please read the above section on enabling the EXPERIMENTAL_SPF
+feature.  You must also have DKIM support, so you cannot set the
+DISABLE_DKIM feature.  Once both of those conditions have been met
+you can enable DMARC in Local/Makefile:
+
+EXPERIMENTAL_DMARC=yes
+LDFLAGS += -lopendmarc
+# CFLAGS += -I/usr/local/include
+# LDFLAGS += -L/usr/local/lib
+
+The first line sets the feature to include the correct code, and
+the second line says to link the libopendmarc libraries into the
+exim binary.  The commented out lines should be uncommented if you
+built opendmarc from source and installed in the default location.
+Adjust the paths if you installed them elsewhere, but you do not
+need to uncomment them if an rpm (or you) installed them in the
+package controlled locations (/usr/include and /usr/lib).
+
+
+2. Use the following global settings to configure DMARC:
+
+Required:
+dmarc_tld_file      Defines the location of a text file of valid
+                    top level domains the opendmarc library uses
+                    during domain parsing. Maintained by Mozilla,
+                    the most current version can be downloaded
+                    from a link at http://publicsuffix.org/list/.
+
+Optional:
+dmarc_history_file  Defines the location of a file to log results
+                    of dmarc verification on inbound emails. The
+                    contents are importable by the opendmarc tools
+                    which will manage the data, send out DMARC
+                    reports, and expire the data. Make sure the
+                    directory of this file is writable by the user
+                    exim runs as.
+
+dmarc_forensic_sender The email address to use when sending a
+                    forensic report detailing alignment failures
+                    if a sender domain's dmarc record specifies it
+                    and you have configured Exim to send them.
+                    Default: do-not-reply@$default_hostname
+
+
+3. By default, the DMARC processing will run for any remote,
+non-authenticated user.  It makes sense to only verify DMARC
+status of messages coming from remote, untrusted sources.  You can
+use standard conditions such as hosts, senders, etc, to decide that
+DMARC verification should *not* be performed for them and disable
+DMARC with a control setting:
+
+  control = dmarc_disable_verify
+
+A DMARC record can also specify a "forensic address", which gives
+exim an email address to submit reports about failed alignment.
+Exim does not do this by default because in certain conditions it
+results in unintended information leakage (what lists a user might
+be subscribed to, etc).  You must configure exim to submit forensic
+reports to the owner of the domain.  If the DMARC record contains a
+forensic address and you specify the control statement below, then
+exim will send these forensic emails.  It's also advised that you
+configure a dmarc_forensic_sender because the default sender address
+construction might be inadequate.
+
+  control = dmarc_forensic_enable
+
+(AGAIN: You can choose not to send these forensic reports by simply
+not putting the dmarc_forensic_enable control line at any point in
+your exim config.  If you don't tell it to send them, it will not
+send them.)
+
+There are no options to either control.  Both must appear before
+the DATA acl.
+
+
+4. You can now run DMARC checks in incoming SMTP by using the
+"dmarc_status" ACL condition in the DATA ACL.  You are required to
+call the spf condition first in the ACLs, then the "dmarc_status"
+condition.  Putting this condition in the ACLs is required in order
+for a DMARC check to actually occur.  All of the variables are set
+up before the DATA ACL, but there is no actual DMARC check that
+occurs until a "dmarc_status" condition is encountered in the ACLs.
+
+The dmarc_status condition takes a list of strings on its
+right-hand side.  These strings describe recommended action based
+on the DMARC check.  To understand what the policy recommendations
+mean, refer to the DMARC website above.  Valid strings are:
+
+  o accept      The DMARC check passed and the library recommends
+                accepting the email.
+  o reject      The DMARC check failed and the library recommends
+                rejecting the email.
+  o quarantine  The DMARC check failed and the library recommends
+                keeping it for further inspection.
+  o none        The DMARC check passed and the library recommends
+                no specific action, neutral.
+  o norecord    No policy section in the DMARC record for this
+                sender domain.
+  o nofrom      Unable to determine the domain of the sender.
+  o temperror   Library error or dns error.
+  o off         The DMARC check was disabled for this email.
+
+You can prefix each string with an exclamation mark to invert its
+meaning, for example "!accept" will match all results but
+"accept".  The string list is evaluated left-to-right in a
+short-circuit fashion.  When a string matches the outcome of the
+DMARC check, the condition succeeds.  If none of the listed
+strings matches the outcome of the DMARC check, the condition
+fails.
+
+Of course, you can also use any other lookup method that Exim
+supports, including LDAP, Postgres, MySQL, etc, as long as the
+result is a list of colon-separated strings;
+
+Several expansion variables are set before the DATA ACL is
+processed, and you can use them in this ACL.  The following
+expansion variables are available:
+
+  o $dmarc_status
+    This is a one word status indicating what the DMARC library
+    thinks of the email.
+
+  o $dmarc_status_text
+    This is a slightly longer, human readable status.
+
+  o $dmarc_used_domain
+    This is the domain which DMARC used to look up the DMARC
+    policy record.
+
+  o $dmarc_ar_header
+    This is the entire Authentication-Results header which you can
+    add using an add_header modifier.
+
+
+5. How to enable DMARC advanced operation:
+By default, Exim's DMARC configuration is intended to be
+non-intrusive and conservative.  To facilitate this, Exim will not
+create any type of logging files without explicit configuration by
+you, the admin.  Nor will Exim send out any emails/reports about
+DMARC issues without explicit configuration by you, the admin (other
+than typical bounce messages that may come about due to ACL
+processing or failure delivery issues).
+
+In order to log statistics suitable to be imported by the opendmarc
+tools, you need to:
+a. Configure the global setting dmarc_history_file.
+b. Configure cron jobs to call the appropriate opendmarc history
+   import scripts and truncating the dmarc_history_file.
+
+In order to send forensic reports, you need to:
+a. Configure the global setting dmarc_forensic_sender.
+b. Configure, somewhere before the DATA ACL, the control option to
+   enable sending DMARC forensic reports.
+
+
+6. Example usage:
+(RCPT ACL)
+  warn    domains        = +local_domains
+          hosts          = +local_hosts
+          control        = dmarc_disable_verify
+
+  warn    !domains       = +screwed_up_dmarc_records
+          control        = dmarc_enable_forensic
+
+(DATA ACL)
+  warn    dmarc_status   = accept : none : off
+          !authenticated = *
+          log_message    = DMARC DEBUG: $dmarc_status $dmarc_used_domain
+          add_header     = $dmarc_ar_header
+
+  warn    dmarc_status   = !accept
+          !authenticated = *
+          log_message    = DMARC DEBUG: '$dmarc_status' for $dmarc_used_domain
+
+  warn    dmarc_status   = quarantine
+          !authenticated = *
+          set $acl_m_quarantine = 1
+          # Do something in a transport with this flag variable
+
+  deny    dmarc_status   = reject
+          !authenticated = *
+          message        = Message from $domain_used_domain failed sender's DMARC policy, REJECT
+
+
+
+Transport post-delivery actions
+--------------------------------------------------------------
+
+An arbitrary per-transport string can be expanded on successful delivery,
+and (for SMTP transports) a second string on deferrals caused by a host error.
+This feature may be used, for example, to write exim internal log information
+(not available otherwise) into a database.
+
+In order to use the feature, you must set
+
+EXPERIMENTAL_TPDA=yes
+
+in your Local/Makefile
+
+and define the expandable strings in the runtime config file, to
+be executed at end of delivery.
+
+Additionally, there are 6 more variables, available at end of
+delivery:
+
+tpda_delivery_ip             IP of host, which has accepted delivery
+tpda_delivery_port           Port of remote host which has accepted delivery
+tpda_delivery_fqdn           FQDN of host, which has accepted delivery
+tpda_delivery_local_part     local part of address being delivered
+tpda_delivery_domain         domain part of address being delivered
+tpda_delivery_confirmation   SMTP confirmation message
+
+In case of a deferral caused by a host-error:
+tpda_defer_errno             Error number
+tpda_defer_errstr            Error string possibly containing more details
+
+The $router_name and $transport_name variables are also usable.
+
+
+To take action after successful deliveries, set the following option
+on any transport of interest.
+
+tpda_delivery_action
+
+An example might look like:
+
+tpda_delivery_action = \
+${lookup pgsql {SELECT * FROM record_Delivery( \
+    '${quote_pgsql:$sender_address_domain}',\
+    '${quote_pgsql:${lc:$sender_address_local_part}}', \
+    '${quote_pgsql:$tpda_delivery_domain}', \
+    '${quote_pgsql:${lc:$tpda_delivery_local_part}}', \
+    '${quote_pgsql:$tpda_delivery_ip}', \
+    '${quote_pgsql:${lc:$tpda_delivery_fqdn}}', \
+    '${quote_pgsql:$message_exim_id}')}}
+
+The string is expanded after the delivery completes and any
+side-effects will happen.  The result is then discarded.
+Note that for complex operations an ACL expansion can be used.
+
+
+In order to log host deferrals, add the following option to an SMTP
+transport:
+
+tpda_host_defer_action
+
+This is a private option of the SMTP transport. It is intended to
+log failures of remote hosts. It is executed only when exim has
+attempted to deliver a message to a remote host and failed due to
+an error which doesn't seem to be related to the individual
+message, sender, or recipient address.
+See section 47.2 of the exim documentation for more details on how
+this is determined.
+
+Example:
+
+tpda_host_defer_action = \
+${lookup mysql {insert into delivlog set \
+    msgid = '${quote_mysql:$message_exim_id}', \
+    senderlp = '${quote_mysql:${lc:$sender_address_local_part}}', \
+    senderdom = '${quote_mysql:$sender_address_domain}', \
+    delivlp = '${quote_mysql:${lc:$tpda_delivery_local_part}}', \
+    delivdom = '${quote_mysql:$tpda_delivery_domain}', \
+    delivip = '${quote_mysql:$tpda_delivery_ip}', \
+    delivport = '${quote_mysql:$tpda_delivery_port}', \
+    delivfqdn = '${quote_mysql:$tpda_delivery_fqdn}', \
+    deliverrno = '${quote_mysql:$tpda_defer_errno}', \
+    deliverrstr = '${quote_mysql:$tpda_defer_errstr}' \
+    }}
+
+
+Redis Lookup
+--------------------------------------------------------------
+
+Redis is open source advanced key-value data store. This document
+does not explain the fundamentals, you should read and understand how
+it works by visiting the website at http://www.redis.io/.
+
+Redis lookup support is added via the hiredis library.  Visit:
+
+  https://github.com/redis/hiredis
+
+to obtain a copy, or find it in your operating systems package repository.
+If building from source, this description assumes that headers will be in
+/usr/local/include, and that the libraries are in /usr/local/lib.
+
+1. In order to build exim with Redis lookup support add
+
+EXPERIMENTAL_REDIS=yes
+
+to your Local/Makefile. (Re-)build/install exim. exim -d should show
+Experimental_Redis in the line "Support for:".
+
+EXPERIMENTAL_REDIS=yes
+LDFLAGS += -lhiredis
+# CFLAGS += -I/usr/local/include
+# LDFLAGS += -L/usr/local/lib
+
+The first line sets the feature to include the correct code, and
+the second line says to link the hiredis libraries into the
+exim binary.  The commented out lines should be uncommented if you
+built hiredis from source and installed in the default location.
+Adjust the paths if you installed them elsewhere, but you do not
+need to uncomment them if an rpm (or you) installed them in the
+package controlled locations (/usr/include and /usr/lib).
+
+
+2. Use the following global settings to configure Redis lookup support:
+
+Required:
+redis_servers       This option provides a list of Redis servers
+                    and associated connection data, to be used in
+                    conjunction with redis lookups. The option is
+                    only available if Exim is configured with Redis
+                    support.
+
+For example:
+
+redis_servers = 127.0.0.1/10/ - using database 10 with no password
+redis_servers = 127.0.0.1//password - to make use of the default database of 0 with a password
+redis_servers = 127.0.0.1// - for default database of 0 with no password
+
+3. Once you have the Redis servers defined you can then make use of the
+experimental Redis lookup by specifying ${lookup redis{}} in a lookup query.
+
+4. Example usage:
+
+(Host List)
+hostlist relay_from_ips = <\n ${lookup redis{SMEMBERS relay_from_ips}}
+
+Where relay_from_ips is a Redis set which contains entries such as "192.168.0.0/24" "10.0.0.0/8" and so on.
+The result set is returned as
+192.168.0.0/24
+10.0.0.0/8
+..
+.
+
+(Domain list)
+domainlist virtual_domains = ${lookup redis {HGET $domain domain}}
+
+Where $domain is a hash which includes the key 'domain' and the value '$domain'.
+
+(Adding or updating an existing key)
+set acl_c_spammer = ${if eq{${lookup redis{SPAMMER_SET}}}{OK}}
+
+Where SPAMMER_SET is a macro and it is defined as
+
+"SET SPAMMER <some_value>"
+
+(Getting a value from Redis)
+
+set acl_c_spam_host = ${lookup redis{GET...}}
+
+
+Proxy Protocol Support
+--------------------------------------------------------------
+
+Exim now has Experimental "Proxy Protocol" support.  It was built on
+specifications from:
+http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt
+
+The purpose of this function is so that an application load balancer,
+such as HAProxy, can sit in front of several Exim servers and Exim
+will log the IP that is connecting to the proxy server instead of
+the IP of the proxy server when it connects to Exim.  It resets the
+$sender_address_host and $sender_address_port to the IP:port of the
+connection to the proxy.  It also re-queries the DNS information for
+this new IP address so that the original sender's hostname and IP
+get logged in the Exim logfile.  There is no logging if a host passes or
+fails Proxy Protocol negotiation, but it can easily be determined and
+recorded in an ACL (example is below).
+
+1. To compile Exim with Proxy Protocol support, put this in
+Local/Makefile:
+
+EXPERIMENTAL_PROXY=yes
+
+2. Global configuration settings:
+
+proxy_required_hosts = HOSTLIST
+
+The proxy_required_hosts option will require any IP in that hostlist
+to use Proxy Protocol. The specification of Proxy Protocol is very
+strict, and if proxy negotiation fails, Exim will not allow any SMTP
+command other than QUIT. (See end of this section for an example.)
+The option is expanded when used, so it can be a hostlist as well as
+string of IP addresses.  Since it is expanded, specifying an alternate
+separator is supported for ease of use with IPv6 addresses.
+
+To log the IP of the proxy in the incoming logline, add:
+  log_selector = +proxy
+
+A default incoming logline (wrapped for appearance) will look like this:
+
+  2013-11-04 09:25:06 1VdNti-0001OY-1V <= me@example.net
+  H=mail.example.net [1.2.3.4] P=esmtp S=433
+
+With the log selector enabled, an email that was proxied through a
+Proxy Protocol server at 192.168.1.2 will look like this:
+
+  2013-11-04 09:25:06 1VdNti-0001OY-1V <= me@example.net
+  H=mail.example.net [1.2.3.4] P=esmtp PRX=192.168.1.2 S=433
+
+3. In the ACL's the following expansion variables are available.
+
+proxy_host_address  The src IP of the proxy server making the connection
+proxy_host_port     The src port the proxy server is using
+proxy_session       Boolean, yes/no, the connected host is required to use
+                    Proxy Protocol.
+
+There is no expansion for a failed proxy session, however you can detect
+it by checking if $proxy_session is true but $proxy_host is empty.  As
+an example, in my connect ACL, I have:
+
+  warn    condition      = ${if and{ {bool{$proxy_session}} \
+                                     {eq{$proxy_host_address}{}} } }
+          log_message    = Failed required proxy protocol negotiation \
+                           from $sender_host_name [$sender_host_address]
+
+  warn    condition      = ${if and{ {bool{$proxy_session}} \
+                                     {!eq{$proxy_host_address}{}} } }
+          # But don't log health probes from the proxy itself
+          condition      = ${if eq{$proxy_host_address}{$sender_host_address} \
+                                {false}{true}}
+          log_message    = Successfully proxied from $sender_host_name \
+                           [$sender_host_address] through proxy protocol \
+                           host $proxy_host_address
+
+4. Runtime issues to be aware of:
+   - Since the real connections are all coming from your proxy, and the
+     per host connection tracking is done before Proxy Protocol is
+     evaluated, smtp_accept_max_per_host must be set high enough to
+     handle all of the parallel volume you expect per inbound proxy.
+   - The proxy has 3 seconds (hard-coded in the source code) to send the
+     required Proxy Protocol header after it connects.  If it does not,
+     the response to any commands will be:
+     "503 Command refused, required Proxy negotiation failed"
+   - If the incoming connection is configured in Exim to be a Proxy
+     Protocol host, but the proxy is not sending the header, the banner
+     does not get sent until the timeout occurs.  If the sending host
+     sent any input (before the banner), this causes a standard Exim
+     synchronization error (i.e. trying to pipeline before PIPELINING
+     was advertised).
+   - This is not advised, but is mentioned for completeness if you have
+     a specific internal configuration that you want this:  If the Exim
+     server only has an internal IP address and no other machines in your
+     organization will connect to it to try to send email, you may
+     simply set the hostlist to "*", however, this will prevent local
+     mail programs from working because that would require mail from
+     localhost to use Proxy Protocol.  Again, not advised!
+
+5. Example of a refused connection because the Proxy Protocol header was
+not sent from a host configured to use Proxy Protocol.  In the example,
+the 3 second timeout occurred (when a Proxy Protocol banner should have
+been sent), the banner was displayed to the user, but all commands are
+rejected except for QUIT:
+
+# nc mail.example.net 25
+220-mail.example.net, ESMTP Exim 4.82+proxy, Mon, 04 Nov 2013 10:45:59
+220 -0800 RFC's enforced
+EHLO localhost
+503 Command refused, required Proxy negotiation failed
+QUIT
+221 mail.example.net closing connection
+
+
+
 --------------------------------------------------------------
 End of file
 --------------------------------------------------------------