X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/4ec0fcb6737da9bc2603056d56fbf6e41e061967..57318bfd2312ea561661906ca8001bd74a01b312:/doc/doc-docbook/spec.xfpt?ds=sidebyside

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 5e4822123..3b9c2f1b8 100644
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -45,14 +45,16 @@
 . Update the Copyright year (only) when changing content.
 . /////////////////////////////////////////////////////////////////////////////
 
-.set previousversion "4.93"
+.set previousversion "4.96"
 .include ./local_params
 
 .set ACL "access control lists (ACLs)"
 .set I   "    "
 
+.set drivernamemax "64"
+
 .macro copyyear
-2019
+2022
 .endmacro
 
 . /////////////////////////////////////////////////////////////////////////////
@@ -95,6 +97,21 @@
 .itable none 0 0 2 $1 left $2 left
 .endmacro
 
+
+. --- A macro for a "tainted" marker, done as a one-element table
+.macro tmark
+.itable none 0 0 1 10pt left
+.row &'Tainted'&
+.endtable
+.endmacro
+. --- A macro for a tainted variable, adding a taint-marker
+. --- and including the .vitem and .vindex
+.macro tvar
+.vitem $1
+.vindex $1
+.tmark
+.endmacro
+
 . --- A macro that generates .row, but puts &I; at the start of the first
 . --- argument, thus indenting it. Assume a minimum of two arguments, and
 . --- allow up to four arguments, which is as many as we'll ever need.
@@ -161,6 +178,13 @@
 .macro index
 .echo "** Don't use .index; use .cindex or .oindex or .vindex"
 .endmacro
+
+
+. use this for a concept-index entry for a header line
+.macro chindex
+.cindex "&'$1'& header line"
+.cindex "header lines" $1
+.endmacro
 . ////////////////////////////////////////////////////////////////////////////
 
 
@@ -184,7 +208,7 @@
 </revision></revhistory>
 <copyright><year>
 .copyyear
-           </year><holder>University of Cambridge</holder></copyright>
+           </year><holder>The Exim Maintainers</holder></copyright>
 </bookinfo>
 .literal off
 
@@ -193,6 +217,8 @@
 . This chunk of literal XML implements index entries of the form "x, see y" and
 . "x, see also y". However, the DocBook DTD doesn't allow <indexterm> entries
 . at the top level, so we have to put the .chapter directive first.
+
+. These do not turn up in the HTML output, unfortunately.  The PDF does get them.
 . /////////////////////////////////////////////////////////////////////////////
 
 .chapter "Introduction" "CHID1"
@@ -318,6 +344,10 @@
   <primary>zero, binary</primary>
   <see><emphasis>binary zero</emphasis></see>
 </indexterm>
+<indexterm role="concept">
+  <primary>headers</primary>
+  <see><emphasis>header lines</emphasis></see>
+</indexterm>
 
 .literal off
 
@@ -743,17 +773,17 @@ the Exim documentation, &"spool"& is always used in the first sense.
 .chapter "Incorporated code" "CHID2"
 .cindex "incorporated code"
 .cindex "regular expressions" "library"
-.cindex "PCRE"
+.cindex "PCRE2"
 .cindex "OpenDMARC"
 A number of pieces of external code are included in the Exim distribution.
 
 .ilist
 Regular expressions are supported in the main Exim program and in the
-Exim monitor using the freely-distributable PCRE library, copyright
-&copy; University of Cambridge. The source to PCRE is no longer shipped with
-Exim, so you will need to use the version of PCRE shipped with your system,
+Exim monitor using the freely-distributable PCRE2 library, copyright
+&copy; University of Cambridge. The source to PCRE2 is not longer shipped with
+Exim, so you will need to use the version of PCRE2 shipped with your system,
 or obtain and install the full version of the library from
-&url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre).
+&url(https://github.com/PhilipHazel/pcre2/releases).
 .next
 .cindex "cdb" "acknowledgment"
 Support for the cdb (Constant DataBase) lookup method is provided by code
@@ -1394,21 +1424,47 @@ Again, cutthrough delivery counts as a verification.
 .next
 Individual routers can be explicitly skipped when running the routers to
 check an address given in the SMTP EXPN command (see the &%expn%& option).
+
 .next
 If the &%domains%& option is set, the domain of the address must be in the set
 of domains that it defines.
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using router domains option"
+A match verifies the variable &$domain$& (which carries tainted data)
+and assigns an untainted value to the &$domain_data$& variable.
+Such an untainted value is often needed in the transport.
+For specifics of the matching operation and the resulting untainted value,
+refer to section &<<SECTdomainlist>>&.
+
+When an untainted value is wanted, use this option
+rather than the generic &%condition%& option.
+
 .next
 .vindex "&$local_part_prefix$&"
+.vindex "&$local_part_prefix_v$&"
 .vindex "&$local_part$&"
 .vindex "&$local_part_suffix$&"
+.vindex "&$local_part_suffix_v$&"
 .cindex affix "router precondition"
 If the &%local_parts%& option is set, the local part of the address must be in
-the set of local parts that it defines. If &%local_part_prefix%& or
+the set of local parts that it defines.
+A match verifies the variable &$local_part$& (which carries tainted data)
+and assigns an untainted value to the &$local_part_data$& variable.
+Such an untainted value is often needed in the transport.
+For specifics of the matching operation and the resulting untainted value,
+refer to section &<<SECTlocparlis>>&.
+
+When an untainted value is wanted, use this option
+rather than the generic &%condition%& option.
+
+If &%local_part_prefix%& or
 &%local_part_suffix%& is in use, the prefix or suffix is removed from the local
 part before this check. If you want to do precondition tests on local parts
 that include affixes, you can do so by using a &%condition%& option (see below)
-that uses the variables &$local_part$&, &$local_part_prefix$&, and
-&$local_part_suffix$& as necessary.
+that uses the variables &$local_part$&, &$local_part_prefix$&,
+&$local_part_prefix_v$&, &$local_part_suffix$&
+and &$local_part_suffix_v$& as necessary.
+
 .next
 .vindex "&$local_user_uid$&"
 .vindex "&$local_user_gid$&"
@@ -1418,23 +1474,35 @@ an account on the local host. If this check succeeds, the uid and gid of the
 local user are placed in &$local_user_uid$& and &$local_user_gid$& and the
 user's home directory is placed in &$home$&; these values can be used in the
 remaining preconditions.
+
 .next
 If the &%router_home_directory%& option is set, it is expanded at this point,
 because it overrides the value of &$home$&. If this expansion were left till
 later, the value of &$home$& as set by &%check_local_user%& would be used in
 subsequent tests. Having two different values of &$home$& in the same router
 could lead to confusion.
+
 .next
 If the &%senders%& option is set, the envelope sender address must be in the
 set of addresses that it defines.
+
 .next
 If the &%require_files%& option is set, the existence or non-existence of
 specified files is tested.
+
 .next
 .cindex "customizing" "precondition"
 If the &%condition%& option is set, it is evaluated and tested. This option
 uses an expanded string to allow you to set up your own custom preconditions.
 Expanded strings are described in chapter &<<CHAPexpand>>&.
+
+Note that while using
+this option for address matching technically works,
+it does not set any de-tainted values.
+Such values are often needed, either for router-specific options or
+for transport options.
+Using the &%domains%& and &%local_parts%& options is usually the most
+convenient way to obtain them.
 .endlist
 
 
@@ -1685,20 +1753,20 @@ overridden if necessary.
 A C99-capable compiler will be required for the build.
 
 
-.section "PCRE library" "SECTpcre"
-.cindex "PCRE library"
-Exim no longer has an embedded PCRE library as the vast majority of
-modern systems include PCRE as a system library, although you may need to
-install the PCRE package or the PCRE development package for your operating
-system. If your system has a normal PCRE installation the Exim build
+.section "PCRE2 library" "SECTpcre"
+.cindex "PCRE2 library"
+Exim no longer has an embedded regular-expression library as the vast majority of
+modern systems include PCRE2 as a system library, although you may need to
+install the PCRE2 package or the PCRE2 development package for your operating
+system. If your system has a normal PCRE2 installation the Exim build
 process will need no further configuration. If the library or the
-headers are in an unusual location you will need to either set the PCRE_LIBS
+headers are in an unusual location you will need to either set the PCRE2_LIBS
 and INCLUDE directives appropriately,
-or set PCRE_CONFIG=yes to use the installed &(pcre-config)& command.
+or set PCRE2_CONFIG=yes to use the installed &(pcre-config)& command.
 If your operating system has no
-PCRE support then you will need to obtain and build the current PCRE
-from &url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/).
-More information on PCRE is available at &url(https://www.pcre.org/).
+PCRE2 support then you will need to obtain and build the current PCRE2
+from &url(https://github.com/PhilipHazel/pcre2/releases).
+More information on PCRE2 is available at &url(https://www.pcre.org/).
 
 .section "DBM libraries" "SECTdb"
 .cindex "DBM libraries" "discussion of"
@@ -1751,9 +1819,11 @@ the traditional &'ndbm'& interface.
 .next
 To complicate things further, there are several very different versions of the
 Berkeley DB package. Version 1.85 was stable for a very long time, releases
-2.&'x'& and 3.&'x'& were current for a while, but the latest versions when Exim last revamped support were numbered 4.&'x'&.
-Maintenance of some of the earlier releases has ceased. All versions of
-Berkeley DB could be obtained from
+2.&'x'& and 3.&'x'& were current for a while,
+but the latest versions when Exim last revamped support were numbered 5.&'x'&.
+Maintenance of some of the earlier releases has ceased,
+and Exim no longer supports versions before 3.&'x'&.
+All versions of Berkeley DB could be obtained from
 &url(http://www.sleepycat.com/), which is now a redirect to their new owner's
 page with far newer versions listed.
 It is probably wise to plan to move your storage configurations away from
@@ -1777,6 +1847,7 @@ USE_DB=yes
 .endd
 Similarly, for gdbm you set USE_GDBM, and for tdb you set USE_TDB. An
 error is diagnosed if you set more than one of these.
+You can set USE_NDBM if needed to override an operating system default.
 
 At the lowest level, the build-time configuration sets none of these options,
 thereby assuming an interface of type (1). However, some operating system
@@ -1791,7 +1862,9 @@ in one of these lines:
 .code
 DBMLIB = -ldb
 DBMLIB = -ltdb
+DBMLIB = -lgdbm -lgdbm_compat
 .endd
+The last of those was for a Linux having GDBM provide emulated NDBM facilities.
 Settings like that will work if the DBM library is installed in the standard
 place. Sometimes it is not, and the library's header file may also not be in
 the default path. You may need to set INCLUDE to specify where the header
@@ -2527,6 +2600,25 @@ use of Exim's filtering capabilities, you should make the document entitled
 
 
 
+.section "Running the daemon" SECTdaemonLaunch
+The most common command line for launching the Exim daemon looks like
+.code
+exim -bd -q5m
+.endd
+This starts a daemon which
+.ilist
+listens for incoming smtp connections, launching handler processes for
+each new one
+.next
+starts a queue-runner process every five minutes, to inspect queued messages
+and run delivery attempts on any that have arrived at their retry time
+.endlist
+Should a queue run take longer than the time between queue-runner starts,
+they will run in parallel.
+Numbers of jobs of the various types are subject to policy controls
+defined in the configuration.
+
+
 .section "Upgrading Exim" "SECID36"
 .cindex "upgrading Exim"
 If you are already running Exim on your host, building and installing a new
@@ -2640,10 +2732,8 @@ Exim through the local interface (see the &%-bm%& and &%-f%& options below).
 See the &%untrusted_set_sender%& option for a way of permitting non-trusted
 users to set envelope senders.
 
-.cindex "&'From:'& header line"
-.cindex "&'Sender:'& header line"
-.cindex "header lines" "From:"
-.cindex "header lines" "Sender:"
+.chindex From:
+.chindex Sender:
 For a trusted user, there is never any check on the contents of the &'From:'&
 header line, and a &'Sender:'& line is never added. Furthermore, any existing
 &'Sender:'& line in incoming local (non-TCP/IP) messages is not removed.
@@ -3612,41 +3702,41 @@ of debugging data, respectively. For example, &%-d+filter%& adds filter
 debugging, whereas &%-d-all+filter%& selects only filter debugging. Note that
 no spaces are allowed in the debug setting. The available debugging categories
 are:
-.display
-&`acl            `& ACL interpretation
-&`auth           `& authenticators
-&`deliver        `& general delivery logic
-&`dns            `& DNS lookups (see also resolver)
-&`dnsbl          `& DNS black list (aka RBL) code
-&`exec           `& arguments for &[execv()]& calls
-&`expand         `& detailed debugging for string expansions
-&`filter         `& filter handling
-&`hints_lookup   `& hints data lookups
-&`host_lookup    `& all types of name-to-IP address handling
-&`ident          `& ident lookup
-&`interface      `& lists of local interfaces
-&`lists          `& matching things in lists
-&`load           `& system load checks
-&`local_scan     `& can be used by &[local_scan()]& (see chapter &&&
-                    &<<CHAPlocalscan>>&)
-&`lookup         `& general lookup code and all lookups
-&`memory         `& memory handling
-&`noutf8         `& modifier: avoid UTF-8 line-drawing
-&`pid            `& modifier: add pid to debug output lines
-&`process_info   `& setting info for the process log
-&`queue_run      `& queue runs
-&`receive        `& general message reception logic
-&`resolver       `& turn on the DNS resolver's debugging output
-&`retry          `& retry handling
-&`rewrite        `& address rewriting
-&`route          `& address routing
-&`timestamp      `& modifier: add timestamp to debug output lines
-&`tls            `& TLS logic
-&`transport      `& transports
-&`uid            `& changes of uid/gid and looking up uid/gid
-&`verify         `& address verification logic
-&`all            `& almost all of the above (see below), and also &%-v%&
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow acl            "ACL interpretation"
+.irow auth           "authenticators"
+.irow deliver        "general delivery logic"
+.irow dns            "DNS lookups (see also resolver)"
+.irow dnsbl          "DNS black list (aka RBL) code"
+.irow exec           "arguments for &[execv()]& calls"
+.irow expand         "detailed debugging for string expansions"
+.irow filter         "filter handling"
+.irow hints_lookup   "hints data lookups"
+.irow host_lookup    "all types of name-to-IP address handling"
+.irow ident          "ident lookup"
+.irow interface      "lists of local interfaces"
+.irow lists          "matching things in lists"
+.irow load           "system load checks"
+.irow local_scan     "can be used by &[local_scan()]& (see chapter &&&
+                    &<<CHAPlocalscan>>&)"
+.irow lookup         "general lookup code and all lookups"
+.irow memory         "memory handling"
+.irow noutf8         "modifier: avoid UTF-8 line-drawing"
+.irow pid            "modifier: add pid to debug output lines"
+.irow process_info   "setting info for the process log"
+.irow queue_run      "queue runs"
+.irow receive        "general message reception logic"
+.irow resolver       "turn on the DNS resolver's debugging output"
+.irow retry          "retry handling"
+.irow rewrite        "address rewriting""
+.irow route          "address routing"
+.irow timestamp      "modifier: add timestamp to debug output lines"
+.irow tls            "TLS logic"
+.irow transport      "transports"
+.irow uid            "changes of uid/gid and looking up uid/gid"
+.irow verify         "address verification logic"
+.irow all            "almost all of the above (see below), and also &%-v%&"
+.endtable
 The &`all`& option excludes &`memory`& when used as &`+all`&, but includes it
 for &`-all`&. The reason for this is that &`+all`& is something that people
 tend to use when generating debug output for Exim maintainers. If &`+memory`&
@@ -3794,9 +3884,11 @@ headers.)
 .cindex "Solaris" "&'mail'& command"
 .cindex "dot" "in incoming non-SMTP message"
 This option, which has the same effect as &%-oi%&, specifies that a dot on a
-line by itself should not terminate an incoming, non-SMTP message. I can find
-no documentation for this option in Solaris 2.4 Sendmail, but the &'mailx'&
-command in Solaris 2.4 uses it. See also &%-ti%&.
+line by itself should not terminate an incoming, non-SMTP message.
+Solaris 2.4 (SunOS 5.4) Sendmail has a similar &%-i%& processing option
+&url(https://docs.oracle.com/cd/E19457-01/801-6680-1M/801-6680-1M.pdf),
+p. 1M-529), and therefore a &%-oi%& command line option, which both are used
+by its &'mailx'& command.
 
 .vitem &%-L%&&~<&'tag'&>
 .oindex "&%-L%&"
@@ -3842,7 +3934,9 @@ id, and the remaining ones must be email addresses. However, if the message is
 active (in the middle of a delivery attempt), it is not altered. This option
 can be used only by an admin user.
 
-.vitem "&%-MC%&&~<&'transport'&>&~<&'hostname'&>&~<&'sequence&~number'&>&&&
+.vitem "&%-MC%&&~<&'transport'&>&~<&'hostname'&>&&&
+	&~<&'host&~IP'&>&&&
+	&~<&'sequence&~number'&>&&&
         &~<&'message&~id'&>"
 .oindex "&%-MC%&"
 .cindex "SMTP" "passed connection"
@@ -3866,6 +3960,12 @@ This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option. It signifies that the
 remote host supports the ESMTP &_DSN_& extension.
 
+.vitem &%-MCd%&
+.oindex "&%-MCd%&"
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-d%& option
+to pass on an information string on the purpose of the process.
+
 .vitem &%-MCG%&&~<&'queue&~name'&>
 .oindex "&%-MCG%&"
 This option is not intended for use by external callers. It is used internally
@@ -3878,12 +3978,27 @@ This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option. It signifies that a
 remote host supports the ESMTP &_CHUNKING_& extension.
 
+.vitem &%-MCL%&
+.oindex "&%-MCL%&"
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MC%& option. It signifies that the server to
+which Exim is connected advertised limits on numbers of mails, recipients or
+recipient domains.
+The limits are given by the following three arguments.
+
 .vitem &%-MCP%&
 .oindex "&%-MCP%&"
 This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option. It signifies that the server to
 which Exim is connected supports pipelining.
 
+.vitem &%-MCp%&
+.oindex "&%-MCp%&"
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MC%& option. It signifies that the connection
+t a remote server is via a SOCKS proxy, using addresses and ports given by
+the following four arguments.
+
 .vitem &%-MCQ%&&~<&'process&~id'&>&~<&'pipe&~fd'&>
 .oindex "&%-MCQ%&"
 This option is not intended for use by external callers. It is used internally
@@ -3893,11 +4008,16 @@ together with the file descriptor number of an open pipe. Closure of the pipe
 signals the final completion of the sequence of processes that are passing
 messages through the same SMTP connection.
 
+.vitem &%-MCq%&&~<&'recipient&~address'&>&~<&'size'&>
+.oindex "&%-MCq%&"
+This option is not intended for use by external callers. It is used internally
+by Exim to implement quota checking for local users.
+
 .vitem &%-MCS%&
 .oindex "&%-MCS%&"
 This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option, and passes on the fact that the
-SMTP SIZE option should be used on messages delivered down the existing
+ESMTP SIZE option should be used on messages delivered down the existing
 connection.
 
 .vitem &%-MCT%&
@@ -3906,6 +4026,16 @@ This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option, and passes on the fact that the
 host to which Exim is connected supports TLS encryption.
 
+.vitem &%-MCr%&&~<&'SNI'&> &&&
+       &%-MCs%&&~<&'SNI'&>
+.oindex "&%-MCs%&"
+.oindex "&%-MCr%&"
+These options are not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MCt%& option, and passes on the fact that
+a TLS Server Name Indication was sent as part of the channel establishment.
+The argument gives the SNI string.
+The "r" variant indicates a DANE-verified connection.
+
 .vitem &%-MCt%&&~<&'IP&~address'&>&~<&'port'&>&~<&'cipher'&>
 .oindex "&%-MCt%&"
 This option is not intended for use by external callers. It is used internally
@@ -3966,7 +4096,7 @@ user.
 .vitem &%-MG%&&~<&'queue&~name'&>&~<&'message&~id'&>&~<&'message&~id'&>&~...
 .oindex "&%-MG%&"
 .cindex queue named
-.cindex "named queues"
+.cindex "named queues" "moving messages"
 .cindex "queue" "moving messages"
 This option requests that each listed message be moved from its current
 queue to the given named queue.
@@ -4070,8 +4200,9 @@ the standard output. This option can be used only by an admin user.
 
 .vitem &%-m%&
 .oindex "&%-m%&"
-This is apparently a synonym for &%-om%& that is accepted by Sendmail, so Exim
-treats it that way too.
+This is a synonym for &%-om%& that is accepted by Sendmail
+(&url(https://docs.oracle.com/cd/E19457-01/801-6680-1M/801-6680-1M.pdf)
+p. 1M-258), so Exim treats it that way too.
 
 .vitem &%-N%&
 .oindex "&%-N%&"
@@ -4185,6 +4316,7 @@ forces queueing.
 .vitem &%-odqs%&
 .oindex "&%-odqs%&"
 .cindex "SMTP" "delaying delivery"
+.cindex "first pass routing"
 This option is a hybrid between &%-odb%&/&%-odi%& and &%-odq%&.
 However, like &%-odb%& and &%-odi%&, this option has no effect if
 &%queue_only_override%& is false and one of the queueing options in the
@@ -4383,7 +4515,6 @@ written. When &%-oX%& is used with &%-bd%&, or when &%-q%& with a time is used
 without &%-bd%&, this is the only way of causing Exim to write a pid file,
 because in those cases, the normal pid file is not used.
 
-.new
 .vitem &%-oPX%&
 .oindex "&%-oPX%&"
 .cindex "pid (process id)" "of daemon"
@@ -4392,7 +4523,6 @@ This option is not intended for general use.
 The daemon uses it when terminating due to a SIGTEM, possibly in
 combination with &%-oP%&&~<&'path'&>.
 It causes the pid file to be removed.
-.wen
 
 .vitem &%-or%&&~<&'time'&>
 .oindex "&%-or%&"
@@ -4426,6 +4556,25 @@ of the syntax, and how it interacts with configuration file options, are given
 in chapter &<<CHAPinterfaces>>&. When &%-oX%& is used to start a daemon, no pid
 file is written unless &%-oP%& is also present to specify a pid filename.
 
+.vitem &%-oY%&
+.oindex &%-oY%&
+.cindex "daemon notifier socket"
+This option controls the creation of an inter-process communications endpoint
+by the Exim daemon.
+It is only relevant when the &%-bd%& (start listening daemon) option is also
+given.
+Normally the daemon creates this socket, unless a &%-oX%& and &*no*& &%-oP%&
+option is also present.
+If this option is given then the socket will not be created.  This could be
+required if the system is running multiple daemons.
+
+The socket is currently used for
+.ilist
+fast ramp-up of queue runner processes
+.next
+obtaining a current queue size
+.endlist
+
 .vitem &%-pd%&
 .oindex "&%-pd%&"
 .cindex "Perl" "starting the interpreter"
@@ -4503,11 +4652,19 @@ appear in the correct order. Each flag is described in a separate item below.
 .cindex "queue" "double scanning"
 .cindex "queue" "routing"
 .cindex "routing" "whole queue before delivery"
+.cindex "first pass routing"
+.cindex "queue runner" "two phase"
 An option starting with &%-qq%& requests a two-stage queue run. In the first
 stage, the queue is scanned as if the &%queue_smtp_domains%& option matched
 every domain. Addresses are routed, local deliveries happen, but no remote
 transports are run.
 
+Performance will be best if the &%queue_run_in_order%& option is false.
+If that is so and the &%queue_fast_ramp%& option is true then
+in the first phase of the run,
+once a threshold number of messages are routed for a given host,
+a delivery process is forked in parallel with the rest of the scan.
+
 .cindex "hints database" "remembering routing"
 The hints database that remembers which messages are waiting for specific hosts
 is updated, as if delivery to those hosts had been deferred. After this is
@@ -4553,7 +4710,7 @@ for later delivery.
 .vitem &%-q[q][i][f[f]][l][G<name>[/<time>]]]%&
 .oindex "&%-qG%&"
 .cindex queue named
-.cindex "named queues"
+.cindex "named queues"	"deliver from"
 .cindex "queue" "delivering specific messages"
 If the &'G'& flag and a name is present, the queue runner operates on the
 queue with the given name rather than the default queue.
@@ -4686,9 +4843,9 @@ recognized when Exim is run normally. It allows for the setting up of explicit
 .vitem &%-t%&
 .oindex "&%-t%&"
 .cindex "recipient" "extracting from header lines"
-.cindex "&'Bcc:'& header line"
-.cindex "&'Cc:'& header line"
-.cindex "&'To:'& header line"
+.chindex Bcc:
+.chindex Cc:
+.chindex To:
 When Exim is receiving a locally-generated, non-SMTP message on its standard
 input, the &%-t%& option causes the recipients of the message to be obtained
 from the &'To:'&, &'Cc:'&, and &'Bcc:'& header lines in the message instead of
@@ -5380,8 +5537,8 @@ local_interfaces = 127.0.0.1 : ::::1
 contains two IP addresses, the IPv4 address 127.0.0.1 and the IPv6 address ::1.
 
 &*Note*&: Although leading and trailing white space is ignored in individual
-list items, it is not ignored when parsing the list. The space after the first
-colon in the example above is necessary. If it were not there, the list would
+list items, it is not ignored when parsing the list. The spaces around the first
+colon in the example above are necessary. If they were not there, the list would
 be interpreted as the two items 127.0.0.1:: and 1.
 
 .section "Changing list separators" "SECTlistsepchange"
@@ -5840,7 +5997,7 @@ Libraries you use may depend on specific environment settings.  This
 imposes a security risk (e.g. PATH). There are two lists:
 &%keep_environment%& for the variables to import as they are, and
 &%add_environment%& for variables we want to set to a fixed value.
-Note that TZ is handled separately, by the $%timezone%$ runtime
+Note that TZ is handled separately, by the &%timezone%& runtime
 option and by the TIMEZONE_DEFAULT buildtime option.
 .code
 # keep_environment = ^LDAP
@@ -5886,13 +6043,13 @@ messages that are submitted by SMTP from local processes using the standard
 input and output (that is, not using TCP/IP). A number of MUAs operate in this
 manner.
 .code
-deny    message       = Restricted characters in address
-        domains       = +local_domains
+deny    domains       = +local_domains
         local_parts   = ^[.] : ^.*[@%!/|]
+        message       = Restricted characters in address
 
-deny    message       = Restricted characters in address
-        domains       = !+local_domains
+deny    domains       = !+local_domains
         local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
+        message       = Restricted characters in address
 .endd
 These statements are concerned with local parts that contain any of the
 characters &"@"&, &"%"&, &"!"&, &"/"&, &"|"&, or dots in unusual places.
@@ -5996,10 +6153,10 @@ require verify = recipient
 This statement requires the recipient address to be verified; if verification
 fails, the address is rejected.
 .code
-# deny    message     = rejected because $sender_host_address \
+# deny    dnslists    = black.list.example
+#         message     = rejected because $sender_host_address \
 #                       is in a black list at $dnslist_domain\n\
 #                       $dnslist_text
-#         dnslists    = black.list.example
 #
 # warn    dnslists    = black.list.example
 #         add_header  = X-Warning: $sender_host_address is in \
@@ -6315,9 +6472,9 @@ smarthost_smtp:
   # request with your smarthost provider to get things fixed:
   hosts_require_tls = *
   tls_verify_hosts = *
-  # As long as tls_verify_hosts is enabled, this won't matter, but if you
-  # have to comment it out then this will at least log whether you succeed
-  # or not:
+  # As long as tls_verify_hosts is enabled, this this will have no effect,
+  # but if you have to comment it out then this will at least log whether
+  # you succeed or not:
   tls_try_verify_hosts = *
   #
   # The SNI name should match the name which we'll expect to verify;
@@ -6362,7 +6519,7 @@ All other options are defaulted.
 .code
 local_delivery:
   driver = appendfile
-  file = /var/mail/$local_part
+  file = /var/mail/$local_part_data
   delivery_date_add
   envelope_to_add
   return_path_add
@@ -6370,7 +6527,15 @@ local_delivery:
 # mode = 0660
 .endd
 This &(appendfile)& transport is used for local delivery to user mailboxes in
-traditional BSD mailbox format. By default it runs under the uid and gid of the
+traditional BSD mailbox format.
+
+We prefer to avoid using &$local_part$& directly to define the mailbox filename,
+as it is provided by a potential bad actor.
+Instead we use &$local_part_data$&,
+the result of looking up &$local_part$& in the user database
+(done by using &%check_local_user%& in the the router).
+
+By default &(appendfile)& runs under the uid and gid of the
 local user, which requires the sticky bit to be set on the &_/var/mail_&
 directory. Some systems use the alternative approach of running mail deliveries
 under a particular group instead of using the sticky bit. The commented options
@@ -6502,9 +6667,9 @@ Chapter &<<CHAPplaintext>>& covers both.
 .chapter "Regular expressions" "CHAPregexp"
 
 .cindex "regular expressions" "library"
-.cindex "PCRE"
+.cindex "PCRE2"
 Exim supports the use of regular expressions in many of its options. It
-uses the PCRE regular expression library; this provides regular expression
+uses the PCRE2 regular expression library; this provides regular expression
 matching that is compatible with Perl 5. The syntax and semantics of
 regular expressions is discussed in
 online Perl manpages, in
@@ -6516,10 +6681,10 @@ O'Reilly (see &url(http://www.oreilly.com/catalog/regex2/)).
 . --- to the old URL for now.  2018-09-07.
 
 The documentation for the syntax and semantics of the regular expressions that
-are supported by PCRE is included in the PCRE distribution, and no further
-description is included here. The PCRE functions are called from Exim using
-the default option settings (that is, with no PCRE options set), except that
-the PCRE_CASELESS option is set when the matching is required to be
+are supported by PCRE2 is included in the PCRE2 distribution, and no further
+description is included here. The PCRE2 functions are called from Exim using
+the default option settings (that is, with no PCRE2 options set), except that
+the PCRE2_CASELESS option is set when the matching is required to be
 case-insensitive.
 
 In most cases, when a regular expression is required in an Exim configuration,
@@ -6575,14 +6740,15 @@ cause parts of the string to be replaced by data that is obtained from the
 lookup. Lookups of this type are conditional expansion items. Different results
 can be defined for the cases of lookup success and failure. See chapter
 &<<CHAPexpand>>&, where string expansions are described in detail.
-The key for the lookup is specified as part of the string expansion.
+The key for the lookup is &*specified*& as part of the string expansion.
 .next
 Lists of domains, hosts, and email addresses can contain lookup requests as a
 way of avoiding excessively long linear lists. In this case, the data that is
 returned by the lookup is often (but not always) discarded; whether the lookup
 succeeds or fails is what really counts. These kinds of list are described in
 chapter &<<CHAPdomhosaddlists>>&.
-The key for the lookup is given by the context in which the list is expanded.
+The key for the lookup is &*implicit*&,
+given by the context in which the list is expanded.
 .endlist
 
 String expansions, lists, and lookups interact with each other in such a way
@@ -6602,6 +6768,7 @@ domains = ${lookup{$sender_host_address}lsearch{/some/file}}
 domains = lsearch;/some/file
 .endd
 The first uses a string expansion, the result of which must be a domain list.
+The key for an expansion-style lookup must be given explicitly.
 No strings have been specified for a successful or a failing lookup; the
 defaults in this case are the looked-up data and an empty string, respectively.
 The expansion takes place before the string is processed as a list, and the
@@ -6612,10 +6779,14 @@ file that is searched could contain lines like this:
 .endd
 When the lookup succeeds, the result of the expansion is a list of domains (and
 possibly other types of item that are allowed in domain lists).
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using a lookup expansion""
+The result of the expansion is not tainted.
 
 In the second example, the lookup is a single item in a domain list. It causes
 Exim to use a lookup to see if the domain that is being processed can be found
-in the file. The file could contains lines like this:
+in the file.
+The file could contains lines like this:
 .code
 domain1:
 domain2:
@@ -6623,6 +6794,10 @@ domain2:
 Any data that follows the keys is not relevant when checking that the domain
 matches the list item.
 
+The key for a list-style lookup is implicit, from the lookup context, if
+the lookup is a single-key type (see below).
+For query-style lookup types the key must be given explicitly.
+
 It is possible, though no doubt confusing, to use both kinds of lookup at once.
 Consider a file containing lines like this:
 .code
@@ -6632,6 +6807,16 @@ If the value of &$sender_host_address$& is 192.168.5.6, expansion of the
 first &%domains%& setting above generates the second setting, which therefore
 causes a second lookup to occur.
 
+The lookup type may optionally be followed by a comma
+and a comma-separated list of options.
+Each option is a &"name=value"& pair.
+Whether an option is meaningful depends on the lookup type.
+
+All lookups support the option &"cache=no_rd"&.
+If this is given then the cache that Exim manages for lookup results
+is not checked before doing the lookup.
+The result of the lookup is still written to the cache.
+
 The rest of this chapter describes the different lookup types that are
 available. Any of them can be used in any part of the configuration where a
 lookup is permitted.
@@ -6646,11 +6831,25 @@ Two different types of data lookup are implemented:
 The &'single-key'& type requires the specification of a file in which to look,
 and a single key to search for. The key must be a non-empty string for the
 lookup to succeed. The lookup type determines how the file is searched.
+.cindex "tainted data" "single-key lookups"
+The file string may not be tainted.
+
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using a single-key lookup"
+All single-key lookups support the option &"ret=key"&.
+If this is given and the lookup
+(either underlying implementation or cached value)
+returns data, the result is replaced with a non-tainted
+version of the lookup key.
 .next
 .cindex "query-style lookup" "definition of"
 The &'query-style'& type accepts a generalized database query. No particular
 key value is assumed by Exim for query-style lookups. You can use whichever
 Exim variables you need to construct the database query.
+.cindex "tainted data" "quoting for lookups"
+If tainted data is used in the query then it should be quuted by
+using the &*${quote_*&<&'lookup-type'&>&*:*&<&'string'&>&*}*& expansion operator
+appropriate for the lookup.
 .endlist
 
 The code for each lookup type is in a separate source file that is included in
@@ -6737,11 +6936,38 @@ by default, but has an option to omit them (see section &<<SECTdbmbuild>>&).
 .next
 .cindex "lookup" "dsearch"
 .cindex "dsearch lookup type"
-&(dsearch)&: The given file must be a directory; this is searched for an entry
-whose name is the key by calling the &[lstat()]& function. The key may not
-contain any forward slash characters. If &[lstat()]& succeeds, the result of
-the lookup is the name of the entry, which may be a file, directory,
-symbolic link, or any other kind of directory entry. An example of how this
+&(dsearch)&: The given file must be an
+absolute
+directory path; this is searched for an entry
+whose name is the key by calling the &[lstat()]& function.
+The key may not
+contain any forward slash characters.
+If &[lstat()]& succeeds then so does the lookup.
+.cindex "tainted data" "dsearch result"
+The result is regarded as untainted.
+
+Options for the lookup can be given by appending them after the word "dsearch",
+separated by a comma.  Options, if present, are a comma-separated list having
+each element starting with a tag name and an equals.
+
+Two options are supported, for the return value and for filtering match
+candidates.
+The "ret" option requests an alternate result value of
+the entire path for the entry. Example:
+.code
+${lookup {passwd} dsearch,ret=full {/etc}}
+.endd
+The default result is just the requested entry.
+The "filter" option requests that only directory entries of a given type
+are matched. The match value is one of "file", "dir" or "subdir" (the latter
+not matching "." or ".."). Example:
+.code
+${lookup {passwd} dsearch,filter=file {/etc}}
+.endd
+The default matching is for any entry type, including directories
+and symlinks.
+
+An example of how this
 lookup can be used to support virtual domains is given in section
 &<<SECTvirtualdomains>>&.
 .next
@@ -6775,6 +7001,11 @@ the implicit key is the host's IP address rather than its name (see section
 &*Warning 3*&: Do not use an IPv4-mapped IPv6 address for a key; use the
 IPv4, in dotted-quad form. (Exim converts IPv4-mapped IPv6 addresses to this
 notation before executing the lookup.)
+
+One option is supported, "ret=full", to request the return of the entire line
+rather than omitting the key portion.
+Note however that the key portion will have been de-quoted.
+
 .next
 .cindex lookup json
 .cindex json "lookup type"
@@ -6789,9 +7020,30 @@ If a selector is numeric, it must apply to a JSON array; the (zero-based)
 nunbered array element is selected.
 Otherwise it must apply to a JSON object; the named element is selected.
 The final resulting element can be a simple JSON type or a JSON object
-or array; for the latter two a string-representation os the JSON
+or array; for the latter two a string-representation of the JSON
 is returned.
 For elements of type string, the returned value is de-quoted.
+
+
+.next
+.cindex LMDB
+.cindex lookup lmdb
+.cindex database lmdb
+&(lmdb)&: The given file is an LMDB database.
+LMDB is a memory-mapped key-value store,
+with API modeled loosely on that of BerkeleyDB.
+See &url(https://symas.com/products/lightning-memory-mapped-database/)
+for the feature set and operation modes.
+
+Exim provides read-only access via the LMDB C library.
+The library can be obtained from &url(https://github.com/LMDB/lmdb)
+or your operating system package repository.
+To enable LMDB support in Exim set LOOKUP_LMDB=yes in &_Local/Makefile_&.
+
+You will need to separately create the LMDB database file,
+possibly using the &"mdb_load"& utility.
+
+
 .next
 .cindex "linear search"
 .cindex "lookup" "lsearch"
@@ -6913,9 +7165,10 @@ be followed by optional colons.
 lookup types support only literal keys.
 
 .next
+.cindex "spf lookup type"
 .cindex "lookup" "spf"
-If Exim is built with SPF support, manual lookups can be done
-(as opposed to the standard ACL condition method.
+&(spf)&: If Exim is built with SPF support, manual lookups can be done
+(as opposed to the standard ACL condition method).
 For details see section &<<SECSPF>>&.
 .endlist ilist
 
@@ -6986,8 +7239,8 @@ passed to a Redis database. See section &<<SECTsql>>&.
 .next
 .cindex "sqlite lookup type"
 .cindex "lookup" "sqlite"
-&(sqlite)&: The format of the query is a filename followed by an SQL statement
-that is passed to an SQLite database. See section &<<SECTsqlite>>&.
+&(sqlite)&: The format of the query is
+an SQL statement that is passed to an SQLite database. See section &<<SECTsqlite>>&.
 
 .next
 &(testdb)&: This is a lookup type that is used for testing Exim. It is
@@ -7190,6 +7443,10 @@ lookups. However, because (apart from the daemon) Exim operates as a collection
 of independent, short-lived processes, this caching applies only within a
 single Exim process. There is no inter-process lookup caching facility.
 
+If an option &"cache=no_rd"& is used on the lookup then
+the cache is only written to, cached data is not used for the operation
+and a real lookup is done.
+
 For single-key lookups, Exim keeps the relevant files open in case there is
 another lookup that needs them. In some types of configuration this can lead to
 many files being kept open for messages with many recipients. To avoid hitting
@@ -7657,16 +7914,16 @@ be preceded by any number of <&'name'&>=<&'value'&> settings, separated by
 spaces. If a value contains spaces it must be enclosed in double quotes, and
 when double quotes are used, backslash is interpreted in the usual way inside
 them. The following names are recognized:
-.display
-&`DEREFERENCE`&  set the dereferencing parameter
-&`NETTIME    `&  set a timeout for a network operation
-&`USER       `&  set the DN, for authenticating the LDAP bind
-&`PASS       `&  set the password, likewise
-&`REFERRALS  `&  set the referrals parameter
-&`SERVERS    `&  set alternate server list for this query only
-&`SIZE       `&  set the limit for the number of entries returned
-&`TIME       `&  set the maximum waiting time for a query
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow DEREFERENCE "set the dereferencing parameter"
+.irow NETTIME     "set a timeout for a network operation"
+.irow USER        "set the DN, for authenticating the LDAP bind"
+.irow PASS        "set the password, likewise"
+.irow REFERRALS   "set the referrals parameter"
+.irow SERVERS     "set alternate server list for this query only"
+.irow SIZE        "set the limit for the number of entries returned"
+.irow TIME        "set the maximum waiting time for a query"
+.endtable
 The value of the DEREFERENCE parameter must be one of the words &"never"&,
 &"searching"&, &"finding"&, or &"always"&. The value of the REFERRALS parameter
 must be &"follow"& (the default) or &"nofollow"&. The latter stops the LDAP
@@ -7893,6 +8150,11 @@ If any MySQL, PostgreSQL, Oracle, InterBase or Redis lookups are used, the
 or &%redis_servers%&
 option (as appropriate) must be set to a colon-separated list of server
 information.
+.oindex &%mysql_servers%&
+.oindex &%pgsql_servers%&
+.oindex &%oracle_servers%&
+.oindex &%ibase_servers%&
+.oindex &%redis_servers%&
 (For MySQL and PostgreSQL, the global option need not be set if all
 queries contain their own server information &-- see section
 &<<SECTspeserque>>&.)
@@ -7945,9 +8207,9 @@ escapes whitespace and backslash characters with a backslash.
 .section "Specifying the server in the query" "SECTspeserque"
 For MySQL, PostgreSQL and Redis lookups (but not currently for Oracle and InterBase),
 it is possible to specify a list of servers with an individual query. This is
-done by starting the query with
+done by appending a comma-separated option to the query type:
 .display
-&`servers=`&&'server1:server2:server3:...'&&`;`&
+&`,servers=`&&'server1:server2:server3:...'&
 .endd
 Each item in the list may take one of two forms:
 .olist
@@ -7973,14 +8235,23 @@ mysql_servers = slave1/db/name/pw:\
 .endd
 In an updating lookup, you could then write:
 .code
-${lookup mysql{servers=master; UPDATE ...} }
+${lookup mysql,servers=master {UPDATE ...} }
 .endd
 That query would then be sent only to the master server. If, on the other hand,
 the master is not to be used for reading, and so is not present in the global
 option, you can still update it by a query of this form:
 .code
-${lookup pgsql{servers=master/db/name/pw; UPDATE ...} }
+${lookup pgsql,servers=master/db/name/pw {UPDATE ...} }
+.endd
+
+An older syntax places the servers specification before the query,
+semicolon separated:
+.code
+${lookup mysql{servers=master; UPDATE ...} }
 .endd
+The new version avoids potential issues with tainted
+arguments in the query, for explicit expansion.
+&*Note*&: server specifications in list-style lookups are still problematic.
 
 
 .section "Special MySQL features" "SECID73"
@@ -8030,17 +8301,37 @@ affected.
 .cindex "sqlite lookup type"
 SQLite is different to the other SQL lookups because a filename is required in
 addition to the SQL query. An SQLite database is a single file, and there is no
-daemon as in the other SQL databases. The interface to Exim requires the name
-of the file, as an absolute path, to be given at the start of the query. It is
-separated from the query by white space. This means that the path name cannot
-contain white space. Here is a lookup expansion example:
-.code
-${lookup sqlite {/some/thing/sqlitedb \
-  select name from aliases where id='userx';}}
+daemon as in the other SQL databases.
+
+.oindex &%sqlite_dbfile%&
+There are two ways of
+specifying the file.
+The first is is by using the &%sqlite_dbfile%& main option.
+The second, which allows separate files for each query,
+is to use an option appended, comma-separated, to the &"sqlite"&
+lookup type word.  The option is the word &"file"&, then an equals,
+then the filename.
+The filename in this case cannot contain whitespace or open-brace charachters.
+
+A deprecated method is available, prefixing the query with the filename
+separated by white space.
+This means that
+.cindex "tainted data" "sqlite file"
+the query cannot use any tainted values, as that taints
+the entire query including the filename - resulting in a refusal to open
+the file.
+
+In all the above cases the filename must be an absolute path.
+
+Here is a lookup expansion example:
+.code
+sqlite_dbfile = /some/thing/sqlitedb
+...
+${lookup sqlite {select name from aliases where id='userx';}}
 .endd
 In a list, the syntax is similar. For example:
 .code
-domainlist relay_to_domains = sqlite;/some/thing/sqlitedb \
+domainlist relay_to_domains = sqlite;\
    select * from relays where ip='$sender_host_address';
 .endd
 The only character affected by the &%quote_sqlite%& operator is a single
@@ -8232,6 +8523,34 @@ in the previous section. You could also use the &(wildlsearch)& or
 
 
 
+.section "Results of list checking" SECTlistresults
+The primary result of doing a list check is a truth value.
+In some contexts additional information is stored
+about the list element that matched:
+.vlist
+.vitem hosts
+A &%hosts%& ACL condition
+will store a result in the &$host_data$& variable.
+.vitem local_parts
+A &%local_parts%& router option or &%local_parts%& ACL condition
+will store a result in the &$local_part_data$& variable.
+.vitem domains
+A &%domains%& router option or &%domains%& ACL condition
+will store a result in the &$domain_data$& variable.
+.vitem senders
+A &%senders%& router option or &%senders%& ACL condition
+will store a result in the &$sender_data$& variable.
+.vitem recipients
+A &%recipients%& ACL condition
+will store a result in the &$recipient_data$& variable.
+.endlist
+
+The detail of the additional information depends on the
+type of match and is given below as the &*value*& information.
+
+
+
+
 .section "Named lists" "SECTnamedlists"
 .cindex "named lists"
 .cindex "list" "named"
@@ -8290,6 +8609,17 @@ domainlist  dom2 = !a.b : *.b
 where &'x.y'& does not match. It's best to avoid negation altogether in
 referenced lists if you can.
 
+.cindex "hiding named list values"
+.cindex "named lists" "hiding value of"
+Some named list definitions may contain sensitive data, for example, passwords for
+accessing databases. To stop non-admin users from using the &%-bP%& command
+line option to read these values, you can precede the definition with the
+word &"hide"&. For example:
+.code
+hide domainlist filter_for_domains = ldap;PASS=secret ldap::/// ...
+.endd
+
+
 Named lists may have a performance advantage. When Exim is routing an
 address or checking an incoming message, it caches the result of tests on named
 lists. So, if you have a setting such as
@@ -8381,6 +8711,10 @@ If a pattern consists of a single @ character, it matches the local host name,
 as set by the &%primary_hostname%& option (or defaulted). This makes it
 possible to use the same configuration file on several different hosts that
 differ only in their names.
+
+The value for a match will be the primary host name.
+
+
 .next
 .cindex "@[] in a domain list"
 .cindex "domain list" "matching local IP interfaces"
@@ -8390,7 +8724,12 @@ in square brackets (as in an email address that contains a domain literal), but
 only if that IP address is recognized as local for email routing purposes. The
 &%local_interfaces%& and &%extra_local_interfaces%& options can be used to
 control which of a host's several IP addresses are treated as local.
-In today's Internet, the use of domain literals is controversial.
+In today's Internet, the use of domain literals is controversial;
+see the &%allow_domain_literals%& main option.
+
+The value for a match will be the string &`@[]`&.
+
+
 .next
 .cindex "@mx_any"
 .cindex "@mx_primary"
@@ -8439,6 +8778,9 @@ involved, it is easiest to change the delimiter for the main list as well:
 domains = <? @mx_any/ignore=<;127.0.0.1;::1 ? \
           an.other.domain ? ...
 .endd
+The value for a match will be the list element string (starting &`@mx_`&).
+
+
 .next
 .cindex "asterisk" "in domain list"
 .cindex "domain list" "asterisk in"
@@ -8451,6 +8793,10 @@ matching works only in terms of dot-separated components. For example, a domain
 list item such as &`*key.ex`& matches &'donkey.ex'& as well as
 &'cipher.key.ex'&.
 
+The value for a match will be the list element string (starting with the asterisk).
+Additionally, &$0$& will be set to the matched string
+and &$1$& to the variable portion which the asterisk matched.
+
 .next
 .cindex "regular expressions" "in domain list"
 .cindex "domain list" "matching regular expression"
@@ -8467,6 +8813,13 @@ must escape any backslash and dollar characters in the regular expression, or
 use the special &`\N`& sequence (see chapter &<<CHAPexpand>>&) to specify that
 it is not to be expanded (unless you really do want to build a regular
 expression by expansion, of course).
+
+The value for a match will be the list element string (starting with the circumflex).
+Additionally, &$0$& will be set to the string matching the regular expression,
+and &$1$& (onwards) to any submatches identified by parentheses.
+
+
+
 .next
 .cindex "lookup" "in domain list"
 .cindex "domain list" "matching by lookup"
@@ -8478,12 +8831,21 @@ must be a filename in a suitable format for the lookup type. For example, for
 domains = cdb;/etc/mail/local_domains.cdb
 .endd
 The appropriate type of lookup is done on the file using the domain name as the
-key. In most cases, the data that is looked up is not used; Exim is interested
+key. In most cases, the value resulting from the lookup is not used; Exim is interested
 only in whether or not the key is present in the file. However, when a lookup
 is used for the &%domains%& option on a router
-or a &%domains%& condition in an ACL statement, the data is preserved in the
+or a &%domains%& condition in an ACL statement, the value is preserved in the
 &$domain_data$& variable and can be referred to in other router options or
 other statements in the same ACL.
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using ACL domains condition"
+The value will be untainted.
+
+&*Note*&: If the data result of the lookup (as opposed to the key)
+is empty, then this empty value is stored in &$domain_data$&.
+The option to return the key for the lookup, as the value,
+may be what is wanted.
+
 
 .next
 Any of the single-key lookup type names may be preceded by
@@ -8502,6 +8864,7 @@ original lookup fails. This is not a useful feature when using a domain list to
 select particular domains (because any domain would match), but it might have
 value if the result of the lookup is being used via the &$domain_data$&
 expansion variable.
+
 .next
 If the pattern starts with the name of a query-style lookup type followed by a
 semicolon (for example, &"nisplus;"& or &"ldap;"&), the remainder of the
@@ -8511,17 +8874,41 @@ chapter &<<CHAPfdlookup>>&. For example:
 hold_domains = mysql;select domain from holdlist \
   where domain = '${quote_mysql:$domain}';
 .endd
-In most cases, the data that is looked up is not used (so for an SQL query, for
+In most cases, the value resulting from the lookup is not used (so for an SQL query, for
 example, it doesn't matter what field you select). Exim is interested only in
 whether or not the query succeeds. However, when a lookup is used for the
-&%domains%& option on a router, the data is preserved in the &$domain_data$&
+&%domains%& option on a router, the value is preserved in the &$domain_data$&
 variable and can be referred to in other options.
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using router domains option"
+The value will be untainted.
+
+.next
+If the pattern starts with the name of a lookup type
+of either kind (single-key or query-style) it may be
+followed by a comma and options,
+The options are lookup-type specific and consist of a comma-separated list.
+Each item starts with a tag and and equals "=" sign.
+
 .next
 .cindex "domain list" "matching literal domain name"
 If none of the above cases apply, a caseless textual comparison is made
 between the pattern and the domain.
+
+The value for a match will be the list element string.
+.cindex "tainted data" "de-tainting"
+Note that this is commonly untainted
+(depending on the way the list was created).
+Specifically, explicit text in the configuration file in not tainted.
+This is a useful way of obtaining an untainted equivalent to
+the domain, for later operations.
+
+However if the list (including one-element lists)
+is created by expanding a variable containing tainted data,
+it is tainted and so will the match value be.
 .endlist
 
+
 Here is an example that uses several different kinds of pattern:
 .code
 domainlist funny_domains = \
@@ -8620,9 +9007,13 @@ accept hosts = @[]
 .endd
 .next
 .cindex "CIDR notation"
-If the pattern is an IP address followed by a slash and a mask length (for
-example 10.11.42.0/24), it is matched against the IP address of the subject
-host under the given mask. This allows, an entire network of hosts to be
+If the pattern is an IP address followed by a slash and a mask length, for
+example
+.code
+10.11.42.0/24
+.endd
+, it is matched against the IP address of the subject
+host under the given mask. This allows an entire network of hosts to be
 included (or excluded) by a single item. The mask uses CIDR notation; it
 specifies the number of address bits that must match, starting from the most
 significant end of the address.
@@ -9191,6 +9582,9 @@ become case-sensitive after &"+caseful"& has been seen.
 .section "Local part lists" "SECTlocparlis"
 .cindex "list" "local part list"
 .cindex "local part" "list"
+These behave in the same way as domain and host lists, with the following
+changes:
+
 Case-sensitivity in local part lists is handled in the same way as for address
 lists, as just described. The &"+caseful"& item can be used if required. In a
 setting of the &%local_parts%& option in a router with &%caseful_local_part%&
@@ -9235,9 +9629,19 @@ the data type.  ACL rules always expand strings.  A couple of expansion
 conditions do not expand some of the brace-delimited branches, for security
 reasons,
 .cindex "tainted data" expansion
+.cindex "tainted data" definition
 .cindex expansion "tainted data"
 and expansion of data deriving from the sender (&"tainted data"&)
-is not permitted.
+is not permitted (including acessing a file using a tainted name).
+
+Common ways of obtaining untainted equivalents of variables with
+tainted values
+.cindex "tainted data" "de-tainting"
+come down to using the tainted value as a lookup key in a trusted database.
+This database could be the filesystem structure,
+or the password file,
+or accessed via a DBMS.
+Specific methods are indexed under &"de-tainting"&.
 
 
 
@@ -9384,7 +9788,7 @@ If the ACL returns defer the result is a forced-fail.  Otherwise the expansion f
 
 .vitem "&*${authresults{*&<&'authserv-id'&>&*}}*&"
 .cindex authentication "results header"
-.cindex headers "authentication-results:"
+.chindex Authentication-Results:
 .cindex authentication "expansion item"
 This item returns a string suitable for insertion as an
 &'Authentication-Results:'&
@@ -9709,7 +10113,7 @@ letters appear. For example:
        "&*$bheader_*&<&'header&~name'&>&*:*&&~or&~&&&
         &*$bh_*&<&'header&~name'&>&*:*&" &&&
        "&*$lheader_*&<&'header&~name'&>&*:*&&~or&~&&&
-        &*$lh_*&<&'header&~name'&>&*:*&"
+        &*$lh_*&<&'header&~name'&>&*:*&" &&&
        "&*$rheader_*&<&'header&~name'&>&*:*&&~or&~&&&
         &*$rh_*&<&'header&~name'&>&*:*&"
 .cindex "expansion" "header insertion"
@@ -9794,7 +10198,7 @@ They are visible in DKIM, PRDR and DATA ACLs.
 Header lines that are added in a RCPT ACL (for example)
 are saved until the message's incoming header lines are available, at which
 point they are added.
-When any of the above ACLs ar
+When any of the above ACLs are
 running, however, header lines added by earlier ACLs are visible.
 
 Upper case and lower case letters are synonymous in header names. If the
@@ -9815,6 +10219,10 @@ newline at the very end. For the &%header%& and &%bheader%& expansion, for
 those headers that contain lists of addresses, a comma is also inserted at the
 junctions between headers. This does not happen for the &%rheader%& expansion.
 
+.cindex "tainted data" "message headers"
+When the headers are from an incoming message,
+the result of expanding any of these variables is tainted.
+
 
 .vitem &*${hmac{*&<&'hashname'&>&*}{*&<&'secret'&>&*}{*&<&'string'&>&*}}*&
 .cindex "expansion" "hmac hashing"
@@ -9946,12 +10354,19 @@ extracted is used.
 You can use &`fail`& instead of {<&'string3'&>} as in a string extract.
 
 
-.vitem "&*${lookup{*&<&'key'&>&*}&~*&<&'search&~type'&>&*&~&&&
-        {*&<&'file'&>&*}&~{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&"
-This is the first of one of two different types of lookup item, which are both
-described in the next item.
+.vitem &*${listquote{*&<&'separator'&>&*}{*&<&'string'&>&*}}*&
+.cindex quoting "for list"
+.cindex list quoting
+This item doubles any occurrence of the separator character
+in the given string.
+An empty string is replaced with a single space.
+This converts the string into a safe form for use as a list element,
+in a list using the given separator.
+
 
-.vitem "&*${lookup&~*&<&'search&~type'&>&*&~{*&<&'query'&>&*}&~&&&
+.vitem "&*${lookup&~{*&<&'key'&>&*}&~*&<&'search&~type'&>&*&~&&&
+        {*&<&'file'&>&*}&~{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&" &&&
+       "&*${lookup&~*&<&'search&~type'&>&*&~{*&<&'query'&>&*}&~&&&
         {*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&"
 .cindex "expansion" "lookup in"
 .cindex "file" "lookups"
@@ -10057,10 +10472,11 @@ additional arguments need be given; the maximum number permitted, including the
 name of the subroutine, is nine.
 
 The return value of the subroutine is inserted into the expanded string, unless
-the return value is &%undef%&. In that case, the expansion fails in the same
-way as an explicit &"fail"& on a lookup item. The return value is a scalar.
-Whatever you return is evaluated in a scalar context. For example, if you
-return the name of a Perl vector, the return value is the size of the vector,
+the return value is &%undef%&. In that case, the entire expansion is
+forced to fail, in the same way as an explicit &"fail"& on a lookup item
+does (see section &<<SECTforexpfai>>&).  Whatever you return is evaluated
+in a scalar context, thus the return value is a scalar.  For example, if you
+return a Perl vector, the return value is the size of the vector,
 not its contents.
 
 If the subroutine exits by calling Perl's &%die%& function, the expansion fails
@@ -10110,7 +10526,7 @@ For more discussion and an example, see section &<<SECTverifyPRVS>>&.
 .cindex "expansion" "inserting an entire file"
 .cindex "file" "inserting into expansion"
 .cindex "&%readfile%& expansion item"
-The filename and end-of-line string are first expanded separately. The file is
+The filename and end-of-line (eol) string are first expanded separately. The file is
 then read, and its contents replace the entire item. All newline characters in
 the file are replaced by the end-of-line string if it is present. Otherwise,
 newlines are left in the string.
@@ -10147,7 +10563,7 @@ ${readsocket{inet:[::1]:1234}{request string}}
 Only a single host name may be given, but if looking it up yields more than
 one IP address, they are each tried in turn until a connection is made. For
 both kinds of socket, Exim makes a connection, writes the request string
-unless it is an empty string; and no terminating NUL is ever sent)
+(unless it is an empty string; no terminating NUL is ever sent)
 and reads from the socket until an end-of-file
 is read. A timeout of 5 seconds is applied. Additional, optional arguments
 extend what can be done. Firstly, you can vary the timeout. For example:
@@ -10156,21 +10572,35 @@ ${readsocket{/socket/name}{request string}{3s}}
 .endd
 
 The third argument is a list of options, of which the first element is the timeout
-and must be present if the argument is given.
+and must be present if any options are given.
 Further elements are options of form &'name=value'&.
-Two option types is currently recognised: shutdown and tls.
-The first defines whether (the default)
-or not a shutdown is done on the connection after sending the request.
-Example, to not do so (preferred, eg. by some webservers):
+Example:
 .code
 ${readsocket{/socket/name}{request string}{3s:shutdown=no}}
 .endd
-The second, tls, controls the use of TLS on the connection.  Example:
-.code
-${readsocket{/socket/name}{request string}{3s:tls=yes}}
-.endd
-The default is to not use TLS.
-If it is enabled, a shutdown as descripbed above is never done.
+
+The following option names are recognised:
+.ilist
+&*cache*&
+Defines if the result data can be cached for use by a later identical
+request in the same process.
+Values are &"yes"& or &"no"& (the default).
+If not, all cached results for this connection specification
+will be invalidated.
+
+.next
+&*shutdown*&
+Defines whether or not a write-shutdown is done on the connection after
+sending the request. Values are &"yes"& (the default) or &"no"&
+(preferred, eg. by some webservers).
+
+.next
+&*tls*&
+Controls the use of TLS on the connection.
+Values are &"yes"& or &"no"& (the default).
+If it is enabled, a shutdown as described above is never done.
+.endlist
+
 
 A fourth argument allows you to change any newlines that are in the data
 that is read, in the same way as for &%readfile%& (see above). This example
@@ -10240,16 +10670,30 @@ expansion items.
 This item inserts &"raw"& header lines. It is described with the &%header%&
 expansion item in section &<<SECTexpansionitems>>& above.
 
-.vitem "&*${run{*&<&'command'&>&*&~*&<&'args'&>&*}{*&<&'string1'&>&*}&&&
+.vitem "&*${run <&'options'&> {*&<&'command&~arg&~list'&>&*}{*&<&'string1'&>&*}&&&
         {*&<&'string2'&>&*}}*&"
 .cindex "expansion" "running a command"
 .cindex "&%run%& expansion item"
-The command and its arguments are first expanded as one string. The string is
-split apart into individual arguments by spaces, and then the command is run
+This item runs an external command, as a subprocess.
+One option is supported after the word &'run'&, comma-separated.
+
+If the option &'preexpand'& is not used,
+the command string is split into individual arguments by spaces
+and then each argument is expanded.
+Then the command is run
 in a separate process, but under the same uid and gid.  As in other command
 executions from Exim, a shell is not used by default. If the command requires
 a shell, you must explicitly code it.
+The command name may not be tainted, but the remaining arguments can be.
+
+&*Note*&: if tainted arguments are used, they are supplied by a
+potential attacker;
+a careful assessment for security vulnerabilities should be done.
 
+If the option &'preexpand'& is used,
+the command and its arguments are first expanded as one string. The result is
+split apart into individual arguments by spaces, and then the command is run
+as above.
 Since the arguments are split by spaces, when there is a variable expansion
 which has an empty result, it will cause the situation that the argument will
 simply be omitted when the program is actually executed by Exim. If the
@@ -10260,6 +10704,7 @@ in a string containing quotes, because it would interfere with the quotes
 around the command arguments. A possible guard against this is to wrap the
 variable in the &%sg%& operator to change any quote marks to some other
 character.
+Neither the command nor any argument may be tainted.
 
 The standard input for the command exists, but is empty. The standard output
 and standard error are set to the same file descriptor.
@@ -10371,16 +10816,22 @@ ${sort {${lookup dnsdb{>:,,mx=example.com}}} {<} {${listextract{1}{<,$item}}}}
 will sort an MX lookup into priority order.
 
 
-.vitem &*${substr{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&
+
+.vitem &*${srs_encode&~{*&<&'secret'&>&*}{*&<&'return&~path'&>&*}{*&<&'original&~domain'&>&*}}*&
+SRS encoding.  See SECT &<<SECTSRS>>& for details.
+
+
+
+.vitem &*${substr{*&<&'start'&>&*}{*&<&'len'&>&*}{*&<&'subject'&>&*}}*&
 .cindex "&%substr%& expansion item"
 .cindex "substring extraction"
 .cindex "expansion" "substring extraction"
 The three strings are expanded; the first two must yield numbers. Call them
 <&'n'&> and <&'m'&>. If you are using fixed values for these numbers, that is,
-if <&'string1'&> and <&'string2'&> do not change when they are expanded, you
+if <&'start'&> and <&'len'&> do not change when they are expanded, you
 can use the simpler operator notation that avoids some of the braces:
 .code
-${substr_<n>_<m>:<string>}
+${substr_<n>_<m>:<subject>}
 .endd
 The second number is optional (in both notations).
 If it is absent in the simpler format, the preceding underscore must also be
@@ -10591,7 +11042,7 @@ is controlled by the &%print_topbitchars%& option.
 .vitem &*${escape8bit:*&<&'string'&>&*}*&
 .cindex "expansion" "escaping 8-bit characters"
 .cindex "&%escape8bit%& expansion item"
-If the string contains and characters with the most significant bit set,
+If the string contains any characters with the most significant bit set,
 they are converted to escape sequences starting with a backslash.
 Backslashes and DEL characters are also converted.
 
@@ -10645,8 +11096,7 @@ a decimal representation of the answer (without &"K"&, &"M"& or &"G"&). For exam
 
 As a more realistic example, in an ACL you might have
 .code
-deny   message = Too many bad recipients
-       condition =                    \
+deny   condition =                    \
          ${if and {                   \
            {>{$rcpt_count}{10}}       \
            {                          \
@@ -10655,6 +11105,7 @@ deny   message = Too many bad recipients
              {${eval:$rcpt_count/2}}  \
            }                          \
          }{yes}{no}}
+       message = Too many bad recipients
 .endd
 The condition is true if there have been more than 10 RCPT commands and
 fewer than half of them have resulted in a valid recipient.
@@ -10787,6 +11238,8 @@ If the optional type is given it must be one of "a", "d", "h" or "l"
 and selects address-, domain-, host- or localpart- lists to search among respectively.
 Otherwise all types are searched in an undefined order and the first
 matching list is returned.
+&*Note*&: Neither string-expansion of lists referenced by named-list syntax elements,
+nor expansion of lookup elements, is done by the &%listnamed%& operator.
 
 
 .vitem &*${local_part:*&<&'string'&>&*}*&
@@ -10798,7 +11251,8 @@ empty.
 The parsing correctly handles SMTPUTF8 Unicode in the string.
 
 
-.vitem &*${mask:*&<&'IP&~address'&>&*/*&<&'bit&~count'&>&*}*&
+.vitem &*${mask:*&<&'IP&~address'&>&*/*&<&'bit&~count'&>&*}*& &&&
+       &*${mask_n:*&<&'IP&~address'&>&*/*&<&'bit&~count'&>&*}*&
 .cindex "masked IP address"
 .cindex "IP address" "masking"
 .cindex "CIDR notation"
@@ -10812,8 +11266,12 @@ the result back to text, with mask appended. For example,
 .code
 ${mask:10.111.131.206/28}
 .endd
-returns the string &"10.111.131.192/28"&. Since this operation is expected to
-be mostly used for looking up masked addresses in files, the result for an IPv6
+returns the string &"10.111.131.192/28"&.
+
+Since this operation is expected to
+be mostly used for looking up masked addresses in files, the
+normal
+result for an IPv6
 address uses dots to separate components instead of colons, because colon
 terminates a key string in lsearch files. So, for example,
 .code
@@ -10823,6 +11281,8 @@ returns the string
 .code
 3ffe.ffff.836f.0a00.000a.0800.2000.0000/99
 .endd
+If the optional form &*mask_n*& is used, IPv6 address result are instead
+returned in normailsed form, using colons and with zero-compression.
 Letters in IPv6 addresses are always output in lower case.
 
 
@@ -11054,7 +11514,7 @@ Now deprecated, a synonym for the &%base64%& expansion operator.
 .cindex "expansion" "string length"
 .cindex "string" "length in expansion"
 .cindex "&%strlen%& expansion item"
-The item is replace by the length of the expanded string, expressed as a
+The item is replaced by the length of the expanded string, expressed as a
 decimal number. &*Note*&: Do not confuse &%strlen%& with &%length%&.
 All measurement is done in bytes and is not UTF-8 aware.
 
@@ -11154,14 +11614,14 @@ condition.
 .cindex "expansion" "numeric comparison"
 There are a number of symbolic operators for doing numeric comparisons. They
 are:
-.display
-&`=   `&   equal
-&`==  `&   equal
-&`>   `&   greater
-&`>=  `&   greater or equal
-&`<   `&   less
-&`<=  `&   less or equal
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow "=   " "equal"
+.irow "==  " "equal"
+.irow ">   " "greater"
+.irow ">=  " "greater or equal"
+.irow "<   " "less"
+.irow "<=  " "less or equal"
+.endtable
 For example:
 .code
 ${if >{$message_size}{10M} ...
@@ -11349,6 +11809,10 @@ condition is true if the named file (or directory) exists. The existence test
 is done by calling the &[stat()]& function. The use of the &%exists%& test in
 users' filter files may be locked out by the system administrator.
 
+&*Note:*& Testing a path using this condition is not a sufficient way of
+de-tainting it.
+Consider using a dsearch lookup.
+
 .vitem &*first_delivery*&
 .cindex "delivery" "first"
 .cindex "first delivery"
@@ -11433,6 +11897,11 @@ includes the case of letters, whereas for &%gti%& the comparison is
 case-independent.
 Case and collation order are defined per the system C locale.
 
+
+.vitem &*inbound_srs&~{*&<&'local&~part'&>&*}{*&<&'secret'&>&*}*&
+SRS decode.  See SECT &<<SECTSRS>>& for details.
+
+
 .vitem &*inlist&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
        &*inlisti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
 .cindex "string" "comparison"
@@ -11451,6 +11920,18 @@ ${if inlisti{Needle}{fOo:NeeDLE:bAr}}
   ${if forany{fOo:NeeDLE:bAr}{eqi{$item}{Needle}}}
 .endd
 
+The variable &$value$& will be set for a successful match and can be
+used in the success clause of an &%if%& expansion item using the condition.
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using an inlist expansion condition"
+It will have the same taint status as the list; expansions such as
+.code
+${if inlist {$h_mycode:} {0 : 1 : 42} {$value}}
+.endd
+can be used for de-tainting.
+Any previous &$value$& is restored after the if.
+
+
 .vitem &*isip&~{*&<&'string'&>&*}*&  &&&
        &*isip4&~{*&<&'string'&>&*}*& &&&
        &*isip6&~{*&<&'string'&>&*}*&
@@ -11647,6 +12128,17 @@ item can be used, as in all address lists, to cause subsequent items to
 have their local parts matched casefully. Domains are always matched
 caselessly.
 
+The variable &$value$& will be set for a successful match and can be
+used in the success clause of an &%if%& expansion item using the condition.
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using a match_local_part expansion condition"
+It will have the same taint status as the list; expansions such as
+.code
+${if match_local_part {$local_part} {alice : bill : charlotte : dave} {$value}}
+.endd
+can be used for de-tainting.
+Any previous &$value$& is restored after the if.
+
 Note that <&'string2'&> is not itself subject to string expansion, unless
 Exim was built with the EXPAND_LISTMATCH_RHS option.
 
@@ -11663,8 +12155,9 @@ matched using &%match_ip%&.
 .cindex "&%pam%& expansion condition"
 &'Pluggable Authentication Modules'&
 (&url(https://mirrors.edge.kernel.org/pub/linux/libs/pam/)) are a facility that is
-available in the latest releases of Solaris and in some GNU/Linux
-distributions. The Exim support, which is intended for use in conjunction with
+available in Solaris
+and in some GNU/Linux distributions.
+The Exim support, which is intended for use in conjunction with
 the SMTP AUTH command, is available only if Exim is compiled with
 .code
 SUPPORT_PAM=yes
@@ -11682,15 +12175,12 @@ request, for a password, so the data consists of just two strings.
 
 There can be problems if any of the strings are permitted to contain colon
 characters. In the usual way, these have to be doubled to avoid being taken as
-separators. If the data is being inserted from a variable, the &%sg%& expansion
-item can be used to double any existing colons. For example, the configuration
+separators.
+The &%listquote%& expansion item can be used for this.
+For example, the configuration
 of a LOGIN authenticator might contain this setting:
 .code
-server_condition = ${if pam{$auth1:${sg{$auth2}{:}{::}}}}
-.endd
-For a PLAIN authenticator you could use:
-.code
-server_condition = ${if pam{$auth2:${sg{$auth3}{:}{::}}}}
+server_condition = ${if pam{$auth1:${listquote{:}{$auth2}}}}
 .endd
 In some operating systems, PAM authentication can be done only from a process
 running as root. Since Exim is running as the Exim user when receiving
@@ -11844,6 +12334,14 @@ parsed but not evaluated.
 This section contains an alphabetical list of all the expansion variables. Some
 of them are available only when Exim is compiled with specific options such as
 support for TLS or the content scanning extension.
+.cindex "tainted data"
+Variables marked as &'tainted'& are likely to carry data supplied by
+a potential attacker.
+Variables without such marking may also, depending on how their
+values are created.
+Such variables should not be further expanded,
+used as filenames
+or used as command-line arguments for external commands.
 
 .vlist
 .vitem "&$0$&, &$1$&, etc"
@@ -11858,6 +12356,7 @@ variables may also be set externally by some other matching process which
 precedes the expansion of the string. For example, the commands available in
 Exim filter files include an &%if%& command with its own regular expression
 matching condition.
+If the subject string was tainted then any captured substring will also be.
 
 .vitem "&$acl_arg1$&, &$acl_arg2$&, etc"
 Within an acl condition, expansion condition or expansion item
@@ -11892,8 +12391,8 @@ this variable has the number of arguments.
 .vitem &$acl_verify_message$&
 .vindex "&$acl_verify_message$&"
 After an address verification has failed, this variable contains the failure
-message. It retains its value for use in subsequent modifiers. The message can
-be preserved by coding like this:
+message. It retains its value for use in subsequent modifiers of the verb.
+The message can be preserved by coding like this:
 .code
 warn !verify = sender
      set acl_m0 = $acl_verify_message
@@ -11901,6 +12400,7 @@ warn !verify = sender
 You can use &$acl_verify_message$& during the expansion of the &%message%& or
 &%log_message%& modifiers, to include information about the verification
 failure.
+&*Note*&: The variable is cleared at the end of processing the ACL verb.
 
 .vitem &$address_data$&
 .vindex "&$address_data$&"
@@ -11948,7 +12448,7 @@ to the relevant file.
 When, as a result of aliasing or forwarding, a message is directed to a pipe,
 this variable holds the pipe command when the transport is running.
 
-.vitem "&$auth1$& &-- &$auth3$&"
+.vitem "&$auth1$& &-- &$auth4$&"
 .vindex "&$auth1$&, &$auth2$&, etc"
 These variables are used in SMTP authenticators (see chapters
 &<<CHAPplaintext>>&&--&<<CHAPtlsauth>>&). Elsewhere, they are empty.
@@ -11982,11 +12482,10 @@ authentication, which means this variable could also be visible in all of
 the ACL's as well.
 
 
-.vitem &$authenticated_sender$&
+.tvar &$authenticated_sender$&
 .cindex "sender" "authenticated"
 .cindex "authentication" "sender"
 .cindex "AUTH" "on MAIL command"
-.vindex "&$authenticated_sender$&"
 When acting as a server, Exim takes note of the AUTH= parameter on an incoming
 SMTP MAIL command if it believes the sender is sufficiently trusted, as
 described in section &<<SECTauthparamail>>&. Unless the data is the string
@@ -12009,9 +12508,10 @@ command that does not succeed. Otherwise it is set to &"0"&. This makes it
 possible to distinguish between &"did not try to authenticate"&
 (&$sender_host_authenticated$& is empty and &$authentication_failed$& is set to
 &"0"&) and &"tried to authenticate but failed"& (&$sender_host_authenticated$&
-is empty and &$authentication_failed$& is set to &"1"&). Failure includes any
-negative response to an AUTH command, including (for example) an attempt to use
-an undefined mechanism.
+is empty and &$authentication_failed$& is set to &"1"&).
+Failure includes cancellation of a authentication attempt,
+and any negative response to an AUTH command,
+(including, for example, an attempt to use an undefined mechanism).
 
 .vitem &$av_failed$&
 .cindex "content scanning" "AV scanner failure"
@@ -12085,13 +12585,6 @@ contain the trailing slash. If &$config_file$& does not contain a slash,
 .vindex "&$config_file$&"
 The name of the main configuration file Exim is using.
 
-.vitem &$dmarc_domain_policy$& &&&
-       &$dmarc_status$& &&&
-       &$dmarc_status_text$& &&&
-       &$dmarc_used_domains$&
-Results of DMARC verification.
-For details see section &<<SECDMARC>>&.
-
 .vitem &$dkim_verify_status$&
 Results of DKIM verification.
 For details see section &<<SECDKIMVFY>>&.
@@ -12124,6 +12617,13 @@ When a message has been received this variable contains
 a colon-separated list of signer domains and identities for the message.
 For details see section &<<SECDKIMVFY>>&.
 
+.vitem &$dmarc_domain_policy$& &&&
+       &$dmarc_status$& &&&
+       &$dmarc_status_text$& &&&
+       &$dmarc_used_domains$&
+Results of DMARC verification.
+For details see section &<<SECDMARC>>&.
+
 .vitem &$dnslist_domain$& &&&
        &$dnslist_matched$& &&&
        &$dnslist_text$& &&&
@@ -12138,8 +12638,7 @@ the following data from the lookup: the list's domain name, the key that was
 looked up, the contents of any associated TXT record, and the value from the
 main A record. See section &<<SECID204>>& for more details.
 
-.vitem &$domain$&
-.vindex "&$domain$&"
+.tvar &$domain$&
 When an address is being routed, or delivered on its own, this variable
 contains the domain. Uppercase letters in the domain are converted into lower
 case for &$domain$&.
@@ -12192,20 +12691,32 @@ When the &%smtp_etrn_command%& option is being expanded, &$domain$& contains
 the complete argument of the ETRN command (see section &<<SECTETRN>>&).
 .endlist
 
+.cindex "tainted data"
+If the origin of the data is an incoming message,
+the result of expanding this variable is tainted and may not
+be further expanded or used as a filename.
+When an untainted version is needed, one should be obtained from
+looking up the value in a local (therefore trusted) database.
+Often &$domain_data$& is usable in this role.
+
 
 .vitem &$domain_data$&
 .vindex "&$domain_data$&"
-When the &%domains%& option on a router matches a domain by
-means of a lookup, the data read by the lookup is available during the running
-of the router as &$domain_data$&. In addition, if the driver routes the
+When the &%domains%& condition on a router
+or an ACL
+matches a domain
+against a list, the match value is copied to &$domain_data$&.
+This is an enhancement over previous versions of Exim, when it only
+applied to the data read by a lookup.
+For details on match values see section &<<SECTlistresults>>& et. al.
+
+If the router routes the
 address to a transport, the value is available in that transport. If the
 transport is handling multiple addresses, the value from the first address is
 used.
 
-&$domain_data$& is also set when the &%domains%& condition in an ACL matches a
-domain by means of a lookup. The data read by the lookup is available during
-the rest of the ACL statement. In all other situations, this variable expands
-to nothing.
+&$domain_data$& set in an ACL is available during
+the rest of the ACL statement.
 
 .vitem &$exim_gid$&
 .vindex "&$exim_gid$&"
@@ -12228,6 +12739,7 @@ There may be other characters following the minor version.
 This value may be overridden by the &%exim_version%& main config option.
 
 .vitem &$header_$&<&'name'&>
+.tmark
 This is not strictly an expansion variable. It is expansion syntax for
 inserting the message header line with the given name. Note that the name must
 be terminated by colon or white space, because it may contain a wide variety of
@@ -12286,8 +12798,9 @@ result of the lookup is made available in the &$host_data$& variable. This
 allows you, for example, to do things like this:
 .code
 deny  hosts = net-lsearch;/some/file
-message = $host_data
+      message = $host_data
 .endd
+
 .vitem &$host_lookup_deferred$&
 .cindex "host name" "lookup, failure of"
 .vindex "&$host_lookup_deferred$&"
@@ -12345,13 +12858,11 @@ option in the &(appendfile)& transport. The variable contains the inode number
 of the temporary file which is about to be renamed. It can be used to construct
 a unique name for the file.
 
-.vitem &$interface_address$&
+.vitem &$interface_address$& &&&
+       &$interface_port$&
 .vindex "&$interface_address$&"
-This is an obsolete name for &$received_ip_address$&.
-
-.vitem &$interface_port$&
 .vindex "&$interface_port$&"
-This is an obsolete name for &$received_port$&.
+These are obsolete names for &$received_ip_address$& and &$received_port$&.
 
 .vitem &$item$&
 .vindex "&$item$&"
@@ -12372,8 +12883,7 @@ This variable contains the system load average, multiplied by 1000 so that it
 is an integer. For example, if the load average is 0.21, the value of the
 variable is 210. The value is recomputed every time the variable is referenced.
 
-.vitem &$local_part$&
-.vindex "&$local_part$&"
+.tvar &$local_part$&
 When an address is being routed, or delivered on its own, this
 variable contains the local part. When a number of addresses are being
 delivered together (for example, multiple RCPT commands in an SMTP
@@ -12385,13 +12895,24 @@ Global address rewriting happens when a message is received, so the value of
 because a message may have many recipients and the system filter is called just
 once.
 
-.vindex "&$local_part_prefix$&"
-.vindex "&$local_part_suffix$&"
-.cindex affix variables
-If a local part prefix or suffix has been recognized, it is not included in the
-value of &$local_part$& during routing and subsequent delivery. The values of
-any prefix or suffix are in &$local_part_prefix$& and
-&$local_part_suffix$&, respectively.
+.cindex "tainted data"
+If the origin of the data is an incoming message,
+the result of expanding this variable is tainted and
+may not be further expanded or used as a filename.
+
+&*Warning*&: the content of this variable is usually provided by a potential
+attacker.
+Consider carefully the implications of using it unvalidated as a name
+for file access.
+This presents issues for users' &_.forward_& and filter files.
+For traditional full user accounts, use &%check_local_users%& and the
+&$local_part_data$& variable rather than this one.
+For virtual users, store a suitable pathname component in the database
+which is used for account name validation, and use that retrieved value
+rather than this variable.
+Often &$local_part_data$& is usable in this role.
+If needed, use a router &%address_data%& or &%set%& option for
+the retrieved data.
 
 When a message is being delivered to a file, pipe, or autoreply transport as a
 result of aliasing or forwarding, &$local_part$& is set to the local part of
@@ -12427,29 +12948,32 @@ to process local parts in a case-dependent manner in a router, you can set the
 
 .vitem &$local_part_data$&
 .vindex "&$local_part_data$&"
-When the &%local_parts%& option on a router matches a local part by means of a
-lookup, the data read by the lookup is available during the running of the
-router as &$local_part_data$&. In addition, if the driver routes the address
-to a transport, the value is available in that transport. If the transport is
-handling multiple addresses, the value from the first address is used.
-
-&$local_part_data$& is also set when the &%local_parts%& condition in an ACL
-matches a local part by means of a lookup. The data read by the lookup is
-available during the rest of the ACL statement. In all other situations, this
-variable expands to nothing.
-
-.vitem &$local_part_prefix$&
-.vindex "&$local_part_prefix$&"
+When the &%local_parts%& condition on a router or ACL
+matches a local part list
+the match value is copied to &$local_part_data$&.
+This is an enhancement over previous versions of Exim, when it only
+applied to the data read by a lookup.
+For details on match values see section &<<SECTlistresults>>& et. al.
+
+The &%check_local_user%& router option also sets this variable.
+
+.vindex &$local_part_prefix$& &&&
+	&$local_part_prefix_v$& &&&
+	&$local_part_suffix$& &&&
+	&$local_part_suffix_v$&
 .cindex affix variables
-When an address is being routed or delivered, and a
-specific prefix for the local part was recognized, it is available in this
-variable, having been removed from &$local_part$&.
+If a local part prefix or suffix has been recognized, it is not included in the
+value of &$local_part$& during routing and subsequent delivery. The values of
+any prefix or suffix are in &$local_part_prefix$& and
+&$local_part_suffix$&, respectively.
+.cindex "tainted data"
+If the specification did not include a wildcard then
+the affix variable value is not tainted.
 
-.vitem &$local_part_suffix$&
-.vindex "&$local_part_suffix$&"
-When an address is being routed or delivered, and a
-specific suffix for the local part was recognized, it is available in this
-variable, having been removed from &$local_part$&.
+If the affix specification included a wildcard then the portion of
+the affix matched by the wildcard is in
+&$local_part_prefix_v$& or &$local_part_suffix_v$& as appropriate,
+and both the whole and varying values are tainted.
 
 .vitem &$local_scan_data$&
 .vindex "&$local_scan_data$&"
@@ -12525,7 +13049,7 @@ when the ACL &%malware%& condition is true (see section &<<SECTscanvirus>>&).
 This variable contains the number of bytes in the longest line that was
 received as part of the message, not counting the line termination
 character(s).
-It is not valid if the &%spool_files_wireformat%& option is used.
+It is not valid if the &%spool_wireformat%& option is used.
 
 .vitem &$message_age$&
 .cindex "message" "age of"
@@ -12534,11 +13058,10 @@ This variable is set at the start of a delivery attempt to contain the number
 of seconds since the message was received. It does not change during a single
 delivery attempt.
 
-.vitem &$message_body$&
+.tvar &$message_body$&
 .cindex "body of message" "expansion variable"
 .cindex "message body" "in expansion"
 .cindex "binary zero" "in message body"
-.vindex "&$message_body$&"
 .oindex "&%message_body_visible%&"
 This variable contains the initial portion of a message's body while it is
 being delivered, and is intended mainly for use in filter files. The maximum
@@ -12551,10 +13074,9 @@ easier to search for phrases that might be split over a line break. However,
 this can be disabled by setting &%message_body_newlines%& to be true. Binary
 zeros are always converted into spaces.
 
-.vitem &$message_body_end$&
+.tvar &$message_body_end$&
 .cindex "body of message" "expansion variable"
 .cindex "message body" "in expansion"
-.vindex "&$message_body_end$&"
 This variable contains the final portion of a message's
 body while it is being delivered. The format and maximum size are as for
 &$message_body$&.
@@ -12569,7 +13091,7 @@ separates the body from the header. Newlines are included in the count. See
 also &$message_size$&, &$body_linecount$&, and &$body_zerocount$&.
 
 If the spool file is wireformat
-(see the &%spool_files_wireformat%& main option)
+(see the &%spool_wireformat%& main option)
 the CRLF line-terminators are included in the count.
 
 .vitem &$message_exim_id$&
@@ -12581,15 +13103,13 @@ received. &*Note*&: This is &'not'& the contents of the &'Message-ID:'& header
 line; it is the local id that Exim assigns to the message, for example:
 &`1BXTIK-0001yO-VA`&.
 
-.vitem &$message_headers$&
-.vindex &$message_headers$&
+.tvar &$message_headers$&
 This variable contains a concatenation of all the header lines when a message
 is being processed, except for lines added by routers or transports. The header
 lines are separated by newline characters. Their contents are decoded in the
 same way as a header line that is inserted by &%bheader%&.
 
-.vitem &$message_headers_raw$&
-.vindex &$message_headers_raw$&
+.tvar &$message_headers_raw$&
 This variable is like &$message_headers$& except that no processing of the
 contents of header lines is done.
 
@@ -12615,14 +13135,14 @@ header and the body).
 
 Here is an example of the use of this variable in a DATA ACL:
 .code
-deny message   = Too many lines in message header
-     condition = \
+deny condition = \
       ${if <{250}{${eval:$message_linecount - $body_linecount}}}
+     message   = Too many lines in message header
 .endd
 In the MAIL and RCPT ACLs, the value is zero because at that stage the
 message has not yet been received.
 
-This variable is not valid if the &%spool_files_wireformat%& option is used.
+This variable is not valid if the &%spool_wireformat%& option is used.
 
 .vitem &$message_size$&
 .cindex "size" "of message"
@@ -12642,7 +13162,22 @@ While running a per message ACL (mail/rcpt/predata), &$message_size$&
 contains the size supplied on the MAIL command, or -1 if no size was given. The
 value may not, of course, be truthful.
 
-.vitem &$mime_$&&'xxx'&
+.vitem &$mime_anomaly_level$& &&&
+       &$mime_anomaly_text$& &&&
+       &$mime_boundary$& &&&
+       &$mime_charset$& &&&
+       &$mime_content_description$& &&&
+       &$mime_content_disposition$& &&&
+       &$mime_content_id$& &&&
+       &$mime_content_size$& &&&
+       &$mime_content_transfer_encoding$& &&&
+       &$mime_content_type$& &&&
+       &$mime_decoded_filename$& &&&
+       &$mime_filename$& &&&
+       &$mime_is_coverletter$& &&&
+       &$mime_is_multipart$& &&&
+       &$mime_is_rfc822$& &&&
+       &$mime_part_count$&
 A number of variables whose names start with &$mime$& are
 available when Exim is compiled with the content-scanning extension. For
 details, see section &<<SECTscanmimepart>>&.
@@ -12651,9 +13186,8 @@ details, see section &<<SECTscanmimepart>>&.
 These variables are counters that can be incremented by means
 of the &%add%& command in filter files.
 
-.vitem &$original_domain$&
+.tvar &$original_domain$&
 .vindex "&$domain$&"
-.vindex "&$original_domain$&"
 When a top-level address is being processed for delivery, this contains the
 same value as &$domain$&. However, if a &"child"& address (for example,
 generated by an alias, forward, or filter file) is being processed, this
@@ -12666,9 +13200,8 @@ If a new address is created by means of a &%deliver%& command in a system
 filter, it is set up with an artificial &"parent"& address. This has the local
 part &'system-filter'& and the default qualify domain.
 
-.vitem &$original_local_part$&
+.tvar &$original_local_part$&
 .vindex "&$local_part$&"
-.vindex "&$original_local_part$&"
 When a top-level address is being processed for delivery, this contains the
 same value as &$local_part$&, unless a prefix or suffix was removed from the
 local part, because &$original_local_part$& always contains the full local
@@ -12706,13 +13239,11 @@ messages received via the command line, this is the uid of the sending user.
 For messages received by SMTP over TCP/IP, this is normally the uid of the Exim
 user.
 
-.vitem &$parent_domain$&
-.vindex "&$parent_domain$&"
+.tvar &$parent_domain$&
 This variable is similar to &$original_domain$& (see
 above), except that it refers to the immediately preceding parent address.
 
-.vitem &$parent_local_part$&
-.vindex "&$parent_local_part$&"
+.tvar &$parent_local_part$&
 This variable is similar to &$original_local_part$&
 (see above), except that it refers to the immediately preceding parent address.
 
@@ -12731,6 +13262,9 @@ This is not an expansion variable, but is mentioned here because the string
 (described under &%transport_filter%& in chapter &<<CHAPtransportgeneric>>&).
 It cannot be used in general expansion strings, and provokes an &"unknown
 variable"& error if encountered.
+&*Note*&: This value permits data supplied by a potential attacker to
+be used in the command for a &(pipe)& transport.
+Such configurations should be carefully assessed for security vulnerbilities.
 
 .vitem &$primary_hostname$&
 .vindex "&$primary_hostname$&"
@@ -12755,18 +13289,10 @@ For details see chapter &<<SECTproxyInbound>>&.
 This variable is set to &"yes"& if PRDR was requested by the client for the
 current message, otherwise &"no"&.
 
-.vitem &$prvscheck_address$&
-This variable is used in conjunction with the &%prvscheck%& expansion item,
-which is described in sections &<<SECTexpansionitems>>& and
-&<<SECTverifyPRVS>>&.
-
-.vitem &$prvscheck_keynum$&
-This variable is used in conjunction with the &%prvscheck%& expansion item,
-which is described in sections &<<SECTexpansionitems>>& and
-&<<SECTverifyPRVS>>&.
-
-.vitem &$prvscheck_result$&
-This variable is used in conjunction with the &%prvscheck%& expansion item,
+.vitem &$prvscheck_address$& &&&
+       &$prvscheck_keynum$& &&&
+       &$prvscheck_result$&
+These variables are used in conjunction with the &%prvscheck%& expansion item,
 which is described in sections &<<SECTexpansionitems>>& and
 &<<SECTverifyPRVS>>&.
 
@@ -12781,10 +13307,19 @@ or if not set, the value of &$qualify_domain$&.
 
 .vitem &$queue_name$&
 .vindex &$queue_name$&
-.cindex "named queues"
+.cindex "named queues" variable
 .cindex queues named
 The name of the spool queue in use; empty for the default queue.
 
+.vitem &$queue_size$&
+.vindex "&$queue_size$&"
+.cindex "queue" "size of"
+.cindex "spool" "number of messages"
+This variable contains the number of messages queued.
+It is evaluated on demand, but no more often than once every minute.
+If there is no daemon notifier socket open, the value will be
+an empty string.
+
 .vitem &$r_...$&
 .vindex &$r_...$&
 .cindex router variables
@@ -12819,18 +13354,19 @@ including the one added by Exim (so its value is always greater than zero). It
 is available in the DATA ACL, the non-SMTP ACL, and while routing and
 delivering.
 
-.vitem &$received_for$&
-.vindex "&$received_for$&"
+.tvar &$received_for$&
 If there is only a single recipient address in an incoming message, this
 variable contains that address when the &'Received:'& header line is being
 built. The value is copied after recipient rewriting has happened, but before
 the &[local_scan()]& function is run.
 
-.vitem &$received_ip_address$&
+.vitem &$received_ip_address$& &&&
+       &$received_port$&
 .vindex "&$received_ip_address$&"
-As soon as an Exim server starts processing an incoming TCP/IP connection, this
-variable is set to the address of the local IP interface, and &$received_port$&
-is set to the local port number. (The remote IP address and port are in
+.vindex "&$received_port$&"
+As soon as an Exim server starts processing an incoming TCP/IP connection, these
+variables are set to the address and port on the local IP interface.
+(The remote IP address and port are in
 &$sender_host_address$& and &$sender_host_port$&.) When testing with &%-bh%&,
 the port value is -1 unless it has been set using the &%-oMi%& command line
 option.
@@ -12843,10 +13379,6 @@ messages that are received, thus making these variables available at delivery
 time.
 For outbound connections see &$sending_ip_address$&.
 
-.vitem &$received_port$&
-.vindex "&$received_port$&"
-See &$received_ip_address$&.
-
 .vitem &$received_protocol$&
 .vindex "&$received_protocol$&"
 When a message is being processed, this variable contains the name of the
@@ -12914,8 +13446,7 @@ MAIL).
 The main use of this variable is expected to be to distinguish between
 rejections of MAIL and rejections of RCPT.
 
-.vitem &$recipients$&
-.vindex "&$recipients$&"
+.tvar &$recipients$&
 This variable contains a list of envelope recipients for a message. A comma and
 a space separate the addresses in the replacement text. However, the variable
 is not generally available, to prevent exposure of Bcc recipients in
@@ -12952,10 +13483,10 @@ This variable is set to contain the matching regular expression after a
 When a &%regex%& or &%mime_regex%& ACL condition succeeds,
 these variables contain the
 captured substrings identified by the regular expression.
+If the subject string was tainted then so will any captured substring.
 
 
-.vitem &$reply_address$&
-.vindex "&$reply_address$&"
+.tvar &$reply_address$&
 When a message is being processed, this variable contains the contents of the
 &'Reply-To:'& header line if one exists and it is not empty, or otherwise the
 contents of the &'From:'& header line. Apart from the removal of leading
@@ -13004,8 +13535,7 @@ One of its values causes the address to be passed to another router. When this
 happens, &$self_hostname$& is set to the name of the local host that the
 original router encountered. In other circumstances its contents are null.
 
-.vitem &$sender_address$&
-.vindex "&$sender_address$&"
+.tvar &$sender_address$&
 When a message is being processed, this variable contains the sender's address
 that was received in the message's envelope. The case of letters in the address
 is retained, in both the local part and the domain. For bounce messages, the
@@ -13020,12 +13550,10 @@ distinguish it from data from a recipient address. The value does not persist
 after the end of the current ACL statement. If you want to preserve it for
 longer, you can save it in an ACL variable.
 
-.vitem &$sender_address_domain$&
-.vindex "&$sender_address_domain$&"
+.tvar &$sender_address_domain$&
 The domain portion of &$sender_address$&.
 
-.vitem &$sender_address_local_part$&
-.vindex "&$sender_address_local_part$&"
+.tvar &$sender_address_local_part$&
 The local part portion of &$sender_address$&.
 
 .vitem &$sender_data$&
@@ -13063,8 +13591,7 @@ This boolean variable is true if a successful HELO verification was
 .cindex "DNS" "DNSSEC"
 done using DNS information the resolver library stated was authenticated data.
 
-.vitem &$sender_helo_name$&
-.vindex "&$sender_helo_name$&"
+.tvar &$sender_helo_name$&
 When a message is received from a remote host that has issued a HELO or EHLO
 command, the argument of that command is placed in this variable. It is also
 set if HELO or EHLO is used when a message is received using SMTP locally via
@@ -13099,6 +13626,16 @@ library, by setting:
 dns_dnssec_ok = 1
 .endd
 
+In addition, on Linux with glibc 2.31 or newer the resolver library will
+default to stripping out a successful validation status.
+This will break a previously working Exim installation.
+Provided that you do trust the resolver (ie, is on localhost) you can tell
+glibc to pass through any successful validation with a new option in
+&_/etc/resolv.conf_&:
+.code
+options trust-ad
+.endd
+
 Exim does not perform DNSSEC validation itself, instead leaving that to a
 validating resolver (e.g. unbound, or bind with suitable configuration).
 
@@ -13111,8 +13648,7 @@ all EDNS0 options, then this will have no effect.  OpenBSD's asr resolver
 is known to currently ignore EDNS0, documented in CAVEATS of asr_run(3).
 
 
-.vitem &$sender_host_name$&
-.vindex "&$sender_host_name$&"
+.tvar &$sender_host_name$&
 When a message is received from a remote host, this variable contains the
 host's name as obtained by looking up its IP address. For messages received by
 other means, this variable is empty.
@@ -13230,8 +13766,7 @@ host name, as specified by the &%smtp_active_hostname%& option. The value of
 &$smtp_active_hostname$& is saved with any message that is received, so its
 value can be consulted during routing and delivery.
 
-.vitem &$smtp_command$&
-.vindex "&$smtp_command$&"
+.tvar &$smtp_command$&
 During the processing of an incoming SMTP command, this variable contains the
 entire command. This makes it possible to distinguish between HELO and EHLO in
 the HELO ACL, and also to distinguish between commands such as these:
@@ -13244,9 +13779,8 @@ command, the address in &$smtp_command$& is the original address before any
 rewriting, whereas the values in &$local_part$& and &$domain$& are taken from
 the address after SMTP-time rewriting.
 
-.vitem &$smtp_command_argument$&
+.tvar &$smtp_command_argument$&
 .cindex "SMTP" "command, argument for"
-.vindex "&$smtp_command_argument$&"
 While an ACL is running to check an SMTP command, this variable contains the
 argument, that is, the text that follows the command name, with leading white
 space removed. Following the introduction of &$smtp_command$&, this variable is
@@ -13278,7 +13812,11 @@ filter file to set values that can be tested in users' filter files. For
 example, a system filter could set a value indicating how likely it is that a
 message is junk mail.
 
-.vitem &$spam_$&&'xxx'&
+.vitem &$spam_score$& &&&
+       &$spam_score_int$& &&&
+       &$spam_bar$& &&&
+       &$spam_report$& &&&
+       &$spam_action$&
 A number of variables whose names start with &$spam$& are available when Exim
 is compiled with the content-scanning extension. For details, see section
 &<<SECTscanspamass>>&.
@@ -13474,10 +14012,20 @@ the value of the Distinguished Name of the certificate is made available in the
 If certificate verification fails it may refer to a failing chain element
 which is not the leaf.
 
-.vitem &$tls_in_sni$&
-.vindex "&$tls_in_sni$&"
+
+.vitem &$tls_in_resumption$& &&&
+       &$tls_out_resumption$&
+.vindex &$tls_in_resumption$&
+.vindex &$tls_out_resumption$&
+.cindex TLS resumption
+Observability for TLS session resumption.  See &<<SECTresumption>>& for details.
+
+
+.tvar &$tls_in_sni$&
 .vindex "&$tls_sni$&"
 .cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "observability on server"
 When a TLS session is being established, if the client sends the Server
 Name Indication extension, the value will be placed in this variable.
 If the variable appears in &%tls_certificate%& then this option and
@@ -13493,6 +14041,8 @@ the outbound.
 .vitem &$tls_out_sni$&
 .vindex "&$tls_out_sni$&"
 .cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "observability in client"
 During outbound
 SMTP deliveries, this variable reflects the value of the &%tls_sni%& option on
 the transport.
@@ -13653,6 +14203,8 @@ taint mode of the Perl interpreter. You are encouraged to set this
 option to a true value. To avoid breaking existing installations, it
 defaults to false.
 
+&*Note*&: This is entirely separate from Exim's tainted-data tracking.
+
 
 .section "Calling Perl subroutines" "SECID86"
 When the configuration file includes a &%perl_startup%& option you can make use
@@ -14087,9 +14639,11 @@ listed in more than one group.
 
 .section "Miscellaneous" "SECID96"
 .table2
+.row &%add_environment%&             "environment variables"
 .row &%bi_command%&                  "to run for &%-bi%& command line option"
 .row &%debug_store%&                 "do extra internal checks"
 .row &%disable_ipv6%&                "do no IPv6 processing"
+.row &%keep_environment%&            "environment variables"
 .row &%keep_malformed%&              "for broken files &-- should not happen"
 .row &%localhost_number%&            "for unique message ids in clusters"
 .row &%message_body_newlines%&       "retain newlines in &$message_body$&"
@@ -14207,8 +14761,10 @@ listed in more than one group.
 .row &%daemon_startup_sleep%&        "time to sleep between tries"
 .row &%extra_local_interfaces%&      "not necessarily listened on"
 .row &%local_interfaces%&            "on which to listen, with optional ports"
+.row &%notifier_socket%&             "override compiled-in value"
 .row &%pid_file_path%&               "override compiled-in value"
 .row &%queue_run_max%&               "maximum simultaneous queue runners"
+.row &%smtp_backlog_monitor%&        "level to log listen backlog"
 .endtable
 
 
@@ -14284,8 +14840,10 @@ listed in more than one group.
 .row &%local_scan_timeout%&          "timeout for &[local_scan()]&"
 .row &%message_size_limit%&          "for all messages"
 .row &%percent_hack_domains%&        "recognize %-hack for these domains"
+.row &%proxy_protocol_timeout%&      "timeout for proxy protocol negotiation"
 .row &%spamd_address%&               "set interface to SpamAssassin"
 .row &%strict_acl_vars%&             "object to unset ACL variables"
+.row &%spf_smtp_comment_template%&   "template for &$spf_smtp_comment$&"
 .endtable
 
 
@@ -14307,8 +14865,11 @@ listed in more than one group.
 .table2
 .row &%gnutls_compat_mode%&          "use GnuTLS compatibility mode"
 .row &%gnutls_allow_auto_pkcs11%&    "allow GnuTLS to autoload PKCS11 modules"
+.row &%hosts_require_alpn%&          "mandatory ALPN"
+.row &%hosts_require_helo%&          "mandatory HELO/EHLO"
 .row &%openssl_options%&             "adjust OpenSSL compatibility options"
 .row &%tls_advertise_hosts%&         "advertise TLS to these hosts"
+.row &%tls_alpn%&		     "acceptable protocol names"
 .row &%tls_certificate%&             "location of server certificate"
 .row &%tls_crl%&                     "certificate revocation list"
 .row &%tls_dh_max_bits%&             "clamp D-H bit count suggestion"
@@ -14370,7 +14931,11 @@ See also the &'Policy controls'& section above.
 .table2
 .row &%dkim_verify_hashes%&          "DKIM hash methods accepted for signatures"
 .row &%dkim_verify_keytypes%&        "DKIM key types accepted for signatures"
+.row &%dkim_verify_min_keysizes%&    "DKIM key sizes accepted for signatures"
 .row &%dkim_verify_signers%&         "DKIM domains for which DKIM ACL is run"
+.row &%dmarc_forensic_sender%&       "DMARC sender for report messages"
+.row &%dmarc_history_file%&          "DMARC results log"
+.row &%dmarc_tld_file%&              "DMARC toplevel domains file"
 .row &%host_lookup%&                 "host name looked up for these hosts"
 .row &%host_lookup_order%&           "order of DNS and local name lookups"
 .row &%recipient_unqualified_hosts%& "may send unqualified recipients"
@@ -14472,6 +15037,7 @@ See also the &'Policy controls'& section above.
 .row &%hold_domains%&                "hold delivery for these domains"
 .row &%local_interfaces%&            "for routing checks"
 .row &%queue_domains%&               "no immediate delivery for these"
+.row &%queue_fast_ramp%&             "parallel delivery with 2-phase queue run"
 .row &%queue_only%&                  "no immediate delivery at all"
 .row &%queue_only_file%&             "no immediate delivery if file exists"
 .row &%queue_only_load%&             "no immediate delivery if load is high"
@@ -14518,6 +15084,7 @@ Those options that undergo string expansion before use are marked with
 .cindex "8-bit characters"
 .cindex "log" "selectors"
 .cindex "log" "8BITMIME"
+.cindex "ESMTP extensions" 8BITMIME
 This option causes Exim to send 8BITMIME in its response to an SMTP
 EHLO command, and to accept the BODY= parameter on MAIL commands.
 However, though Exim is 8-bit clean, it is not a protocol converter, and it
@@ -14687,7 +15254,6 @@ domains (defined in the named domain list &%local_domains%& in the default
 configuration). This &"magic string"& matches the domain literal form of all
 the local host's IP addresses.
 
-
 .option allow_mx_to_ip main boolean false
 .cindex "MX record" "pointing to IP address"
 It appears that more and more DNS zone administrators are breaking the rules
@@ -14731,6 +15297,7 @@ That is, set the option to an empty string so that no check is done.
 .option auth_advertise_hosts main "host list&!!" *
 .cindex "authentication" "advertising"
 .cindex "AUTH" "advertising"
+.cindex "ESMTP extensions" AUTH
 If any server authentication mechanisms are configured, Exim advertises them in
 response to an EHLO command only if the calling host matches this list.
 Otherwise, Exim does not advertise AUTH.
@@ -14792,12 +15359,16 @@ just the command name, it is not a complete command line. If an argument is
 required, it must come from the &%-oA%& command line option.
 
 
-.option bounce_message_file main string unset
+.option bounce_message_file main string&!! unset
 .cindex "bounce message" "customizing"
 .cindex "customizing" "bounce message"
 This option defines a template file containing paragraphs of text to be used
 for constructing bounce messages.  Details of the file's contents are given in
-chapter &<<CHAPemsgcust>>&. See also &%warn_message_file%&.
+chapter &<<CHAPemsgcust>>&.
+.cindex bounce_message_file "tainted data"
+The option is expanded to give the file path, which must be
+absolute and untainted.
+See also &%warn_message_file%&.
 
 
 .option bounce_message_text main string unset
@@ -14986,6 +15557,7 @@ may wish to deliberately disable them.
 .option chunking_advertise_hosts main "host list&!!" *
 .cindex CHUNKING advertisement
 .cindex "RFC 3030" "CHUNKING"
+.cindex "ESMTP extensions" CHUNKING
 The CHUNKING extension (RFC3030) will be advertised in the EHLO message to
 these hosts.
 Hosts may use the BDAT command as an alternate to DATA.
@@ -15122,11 +15694,9 @@ etc. are ignored. If IP literals are enabled, the &(ipliteral)& router declines
 to handle IPv6 literal addresses.
 
 
-.new
 .option dkim_verify_hashes main "string list" "sha256 : sha512"
 .cindex DKIM "selecting signature algorithms"
 This option gives a list of hash types which are acceptable in signatures,
-.wen
 and an order of processing.
 Signatures with algorithms not in the list will be ignored.
 
@@ -15144,6 +15714,14 @@ This option gives a list of key types which are acceptable in signatures,
 and an order of processing.
 Signatures with algorithms not in the list will be ignored.
 
+
+.option dkim_verify_min_keysizes main "string list" "rsa=1024 ed25519=250"
+This option gives a list of key sizes which are acceptable in signatures.
+The list is keyed by the algorithm type for the key; the values are in bits.
+Signatures with keys smaller than given by this option will fail verification.
+
+The default enforces the RFC 8301 minimum key size for RSA signatures.
+
 .option dkim_verify_minimal main boolean false
 If set to true, verification of signatures will terminate after the
 first success.
@@ -15156,6 +15734,14 @@ the ACL once for each signature in the message.
 See section &<<SECDKIMVFY>>&.
 
 
+.option dmarc_forensic_sender main string&!! unset
+.option dmarc_history_file main string unset
+.option dmarc_tld_file main string unset
+.cindex DMARC "main section options"
+These options control DMARC processing.
+See section &<<SECDMARC>>& for details.
+
+
 .option dns_again_means_nonexist main "domain list&!!" unset
 .cindex "DNS" "&""try again""& response; overriding"
 DNS lookups give a &"try again"& response for the DNS errors
@@ -15226,6 +15812,16 @@ default. A value of 0 coerces DNSSEC off, a value of 1 coerces DNSSEC on.
 
 If the resolver library does not support DNSSEC then this option has no effect.
 
+On Linux with glibc 2.31 or newer this is insufficient, the resolver library
+will default to stripping out a successful validation status.
+This will break a previously working Exim installation.
+Provided that you do trust the resolver (ie, is on localhost) you can tell
+glibc to pass through any successful validation with a new option in
+&_/etc/resolv.conf_&:
+.code
+options trust-ad
+.endd
+
 
 .option dns_ipv4_lookup main "domain list&!!" unset
 .cindex "IPv6" "DNS lookup for AAAA records"
@@ -15315,13 +15911,16 @@ described in section &<<SECTlineendings>>&.
 .cindex "bounce messages" "success"
 .cindex "DSN" "success"
 .cindex "Delivery Status Notification" "success"
+.cindex "ESMTP extensions" DSN
 DSN extensions (RFC3461) will be advertised in the EHLO message to,
 and accepted from, these hosts.
-Hosts may use the NOTIFY and ENVID options on RCPT TO commands,
-and RET and ORCPT options on MAIL FROM commands.
+Hosts may use the NOTIFY and ORCPT options on RCPT TO commands,
+and RET and ENVID options on MAIL FROM commands.
 A NOTIFY=SUCCESS option requests success-DSN messages.
 A NOTIFY= option with no argument requests that no delay or failure DSNs
 are sent.
+&*Note*&: Supplying success-DSN messages has been criticised
+on privacy grounds; it can leak details of internal forwarding.
 
 .option dsn_from main "string&!!" "see below"
 .cindex "&'From:'& header line" "in bounces"
@@ -15758,6 +16357,24 @@ hosts_connection_nolog = :
 If the &%smtp_connection%& log selector is not set, this option has no effect.
 
 
+.option hosts_require_alpn main "host list&!!" unset
+.cindex ALPN "require negotiation in server"
+.cindex TLS ALPN
+.cindex TLS "Application Layer Protocol Names"
+If the TLS library supports ALPN
+then a successful negotiation of ALPN will be required for any client
+matching the list, for TLS to be used.
+See also the &%tls_alpn%& option.
+
+&*Note*&: prevention of fallback to in-clear connection is not
+managed by this option, and should be done separately.
+
+
+.option hosts_require_helo main "host list&!!" *
+.cindex "HELO/EHLO" requiring
+Exim will require an accepted HELO or EHLO command from a host matching
+this list, before accepting a MAIL command.
+
 
 .option hosts_proxy main "host list&!!" unset
 .cindex proxy "proxy protocol"
@@ -16203,6 +16820,11 @@ to depend on the IP address of the remote host for messages arriving via
 TCP/IP. After expansion, the value must be a sequence of decimal digits,
 optionally followed by K or M.
 
+.cindex "SIZE" "ESMTP extension, advertising"
+.cindex "ESMTP extensions" SIZE
+If nonzero the value will be advertised as a parameter to the ESMTP SIZE
+service extension keyword.
+
 &*Note*&: This limit cannot be made to depend on a message's sender or any
 other properties of an individual message, because it has to be advertised in
 the server's response to EHLO. String expansion failure causes a temporary
@@ -16280,6 +16902,25 @@ harm. This option overrides the &%pipe_as_creator%& option of the &(pipe)&
 transport driver.
 
 
+.option notifier_socket main string "$spool_directory/exim_daemon_notify"
+This option gives the name for a unix-domain socket on which the daemon
+listens for work and information-requests.
+Only installations running multiple daemons sharing a spool directory
+should need to modify the default.
+
+The option is expanded before use.
+If the platform supports Linux-style abstract socket names, the result
+is used with a nul byte prefixed.
+Otherwise,
+it should be a full path name and use a directory accessible
+to Exim.
+
+If this option is set as empty,
+or the command line &%-oY%& option is used, or
+the command line uses a &%-oX%& option and does not use &%-oP%&,
+then a notifier socket is not created.
+
+
 .option openssl_options main "string list" "+no_sslv2 +no_sslv3 +single_dh_use +no_ticket +no_renegotiation"
 .cindex "OpenSSL "compatibility options"
 This option allows an administrator to adjust the SSL options applied
@@ -16452,6 +17093,7 @@ of the &%-oX%& option, unless a path is explicitly supplied by &%-oP%&.
 
 .option pipelining_advertise_hosts main "host list&!!" *
 .cindex "PIPELINING" "suppressing advertising"
+.cindex "ESMTP extensions" PIPELINING
 This option can be used to suppress the advertisement of the SMTP
 PIPELINING extension to specific hosts. See also the &*no_pipelining*&
 control in section &<<SECTcontrols>>&. When PIPELINING is not advertised and
@@ -16462,8 +17104,9 @@ not count as protocol errors (see &%smtp_max_synprot_errors%&).
 
 .option pipelining_connect_advertise_hosts main "host list&!!" *
 .cindex "pipelining" "early connection"
-.cindex "pipelining" PIPE_CONNECT
-If Exim is built with the SUPPORT_PIPE_CONNECT build option
+.cindex "pipelining" PIPECONNECT
+.cindex "ESMTP extensions" PIPECONNECT
+If Exim is built without the DISABLE_PIPE_CONNECT build option
 this option controls which hosts the facility is advertised to
 and from which pipeline early-connection (before MAIL) SMTP
 commands are acceptable.
@@ -16471,11 +17114,16 @@ When used, the pipelining saves on roundtrip times.
 
 See also the &%hosts_pipe_connect%& smtp transport option.
 
-Currently the option name &"X_PIPE_CONNECT"& is used.
+The SMTP service extension keyword advertised is &"PIPECONNECT"&;
+it permits the client to pipeline
+TCP connection and hello command (inclear phase),
+or TLS-establishment and hello command (encrypted phase),
+on later connections to the same host.
 
 
 .option prdr_enable main boolean false
 .cindex "PRDR" "enabling on server"
+.cindex "ESMTP extensions" PRDR
 This option can be used to enable the Per-Recipient Data Response extension
 to SMTP, defined by Eric Hall.
 If the option is set, PRDR is advertised by Exim when operating as a server.
@@ -16551,6 +17199,12 @@ admin user unless &%prod_requires_admin%& is set false. See also
 &%queue_list_requires_admin%& and &%commandline_checks_require_admin%&.
 
 
+.option proxy_protocol_timeout main time 3s
+.cindex proxy "proxy protocol"
+This option sets the timeout for proxy protocol negotiation.
+For details see section &<<SECTproxyInbound>>&.
+
+
 .option qualify_domain main string "see below"
 .cindex "domain" "for qualifying addresses"
 .cindex "address" "qualification"
@@ -16586,6 +17240,15 @@ domains that do not match are processed. All other deliveries wait until the
 next queue run. See also &%hold_domains%& and &%queue_smtp_domains%&.
 
 
+.option queue_fast_ramp main boolean false
+.cindex "queue runner" "two phase"
+.cindex "queue" "double scanning"
+If set to true, two-phase queue runs, initiated using &%-qq%& on the
+command line, may start parallel delivery processes during their first
+phase.  This will be done when a threshold number of messages have been
+routed for a single host.
+
+
 .option queue_list_requires_admin main boolean true
 .cindex "restricting access to features"
 .oindex "&%-bp%&"
@@ -16696,13 +17359,14 @@ run. If you do not want queue runs to occur, omit the &%-q%&&'xx'& setting on
 the daemon's command line.
 
 .cindex queues named
-.cindex "named queues"
+.cindex "named queues" "resource limit"
 To set limits for different named queues use
 an expansion depending on the &$queue_name$& variable.
 
 .option queue_smtp_domains main "domain list&!!" unset
 .cindex "queueing incoming messages"
 .cindex "message" "queueing remote deliveries"
+.cindex "first pass routing"
 When this option is set, a delivery process is started whenever a message is
 received, routing is performed, and local deliveries take place.
 However, if any SMTP deliveries are required for domains that match
@@ -16744,7 +17408,7 @@ received_header_text = Received: \
         ${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
   by $primary_hostname \
   ${if def:received_protocol {with $received_protocol }}\
-  ${if def:tls_ver           { ($tls_ver)}}\
+  ${if def:tls_in_ver        { ($tls_in_ver)}}\
   ${if def:tls_in_cipher_std { tls $tls_in_cipher_std\n\t}}\
   (Exim $version_number)\n\t\
   ${if def:sender_address \
@@ -16753,7 +17417,8 @@ received_header_text = Received: \
   ${if def:received_for {\n\tfor $received_for}}
 .endd
 
-The reference to the TLS cipher is omitted when Exim is built without TLS
+The references to the TLS version and cipher are
+omitted when Exim is built without TLS
 support. The use of conditional expansions ensures that this works for both
 locally generated messages and messages received from remote hosts, giving
 header lines such as the following:
@@ -16795,7 +17460,7 @@ or if the message was submitted locally (not using TCP/IP), and the &%-bnq%&
 option was not set.
 
 
-.option recipients_max main integer 0
+.option recipients_max main integer 50000
 .cindex "limit" "number of recipients"
 .cindex "recipient" "maximum number"
 If this option is set greater than zero, it specifies the maximum number of
@@ -16840,6 +17505,9 @@ manager, there is no way of controlling the total number of simultaneous
 deliveries if the configuration allows a delivery attempt as soon as a message
 is received.
 
+See also the &%max_parallel%& generic transport option,
+and the &%serialize_hosts%& smtp transport option.
+
 .cindex "number of deliveries"
 .cindex "delivery" "maximum number of"
 If you want to control the total number of deliveries on the system, you
@@ -17008,7 +17676,7 @@ live with.
 . searchable.  NM changed this occurrence for bug 1197 to no longer allow
 . the option name to split.
 
-.option "smtp_accept_max_per_connection" main integer 1000 &&&
+.option "smtp_accept_max_per_connection" main integer&!! 1000 &&&
          smtp_accept_max_per_connection
 .cindex "SMTP" "limiting incoming message count"
 .cindex "limit" "messages per SMTP connection"
@@ -17018,6 +17686,9 @@ results in the transfer of a message. After the limit is reached, a 421
 response is given to subsequent MAIL commands. This limit is a safety
 precaution against a client that goes mad (incidents of this type have been
 seen).
+The option is expanded after the HELO or EHLO is received
+and may depend on values available at that time.
+An empty or zero value after expansion removes the limit.
 
 
 .option smtp_accept_max_per_host main string&!! unset
@@ -17125,6 +17796,14 @@ messages, it is also used as the default for HELO commands in callout
 verification if there is no remote transport from which to obtain a
 &%helo_data%& value.
 
+.option smtp_backlog_monitor main integer 0
+.cindex "connection backlog" monitoring
+If this option is set to greater than zero, and the backlog of available
+TCP connections on a socket listening for SMTP is larger than it, a line
+is logged giving the value and the socket address and port.
+The value is retrived jsut before an accept call.
+This facility is only available on Linux.
+
 .option smtp_banner main string&!! "see below"
 .cindex "SMTP" "welcome banner"
 .cindex "banner for SMTP"
@@ -17155,7 +17834,7 @@ is zero). If there isn't enough space, a temporary error code is returned.
 
 
 .option smtp_connect_backlog main integer 20
-.cindex "connection backlog"
+.cindex "connection backlog" "set maximum"
 .cindex "SMTP" "connection backlog"
 .cindex "backlog of connections"
 This option specifies a maximum number of waiting SMTP connections. Exim passes
@@ -17193,6 +17872,7 @@ hosts), you can do so by an appropriate use of a &%control%& modifier in an ACL
 
 .option smtp_etrn_command main string&!! unset
 .cindex "ETRN" "command to be run"
+.cindex "ESMTP extensions" ETRN
 .vindex "&$domain$&"
 If this option is set, the given command is run whenever an SMTP ETRN
 command is received from a host that is permitted to issue such commands (see
@@ -17204,6 +17884,11 @@ example:
 smtp_etrn_command = /etc/etrn_command $domain \
                     $sender_host_address
 .endd
+If the option is not set, the argument for the ETRN command must
+be a &'#'& followed by an address string.
+In this case an &'exim -R <string>'& command is used;
+if the ETRN ACL has set up a named-queue then &'-MCG <queue>'& is appended.
+
 A new process is created to run the command, but Exim does not wait for it to
 complete. Consequently, its status cannot be checked. If the command cannot be
 run, a line is written to the panic log, but the ETRN caller still receives
@@ -17366,7 +18051,8 @@ example, instead of &"Administrative prohibition"&, it might give:
 
 
 .option smtputf8_advertise_hosts main "host list&!!" *
-.cindex "SMTPUTF8" "advertising"
+.cindex "SMTPUTF8" "ESMTP extension, advertising"
+.cindex "ESMTP extensions" SMTPUTF8
 When Exim is built with support for internationalised mail names,
 the availability thereof is advertised in
 response to EHLO only to those client hosts that match this option. See
@@ -17384,6 +18070,46 @@ See section &<<SECTscanspamass>>& for more details.
 This option is available when Exim is compiled with SPF support.
 See section &<<SECSPF>>& for more details.
 
+.option spf_smtp_comment_template main string&!! "Please%_see%_http://www.open-spf.org/Why"
+This option is available when Exim is compiled with SPF support.  It
+allows the customisation of the SMTP comment that the SPF library
+generates.  You are strongly encouraged to link to your own explanative
+site. The template must not contain spaces. If you need spaces in the
+output, use the proper placeholder. If libspf2 can not parse the
+template, it uses a built-in default broken link. The following placeholders
+(along with Exim variables (but see below)) are allowed in the template:
+.ilist
+&*%_*&: A space.
+.next
+&*%{L}*&: Envelope sender's local part.
+.next
+&*%{S}*&: Envelope sender.
+.next
+&*%{O}*&: Envelope sender's domain.
+.next
+&*%{D}*&: Current(?) domain.
+.next
+&*%{I}*&: SMTP client Ip.
+.next
+&*%{C}*&: SMTP client pretty IP.
+.next
+&*%{T}*&: Epoch time (UTC).
+.next
+&*%{P}*&: SMTP client domain name.
+.next
+&*%{V}*&: IP version.
+.next
+&*%{H}*&: EHLO/HELO domain.
+.next
+&*%{R}*&: Receiving domain.
+.endlist
+The capitalized placeholders do proper URL encoding, if you use them
+lowercased, no encoding takes place.  This list was compiled from the
+libspf2 sources.
+
+A note on using Exim variables: As
+currently the SPF library is initialized before the SMTP EHLO phase,
+the variables useful for expansion are quite limited.
 
 
 .option split_spool_directory main boolean false
@@ -17535,6 +18261,7 @@ syslog. The value must be no longer than 32 characters. See chapter
 
 .option syslog_timestamp main boolean true
 .cindex "syslog" "timestamps"
+.cindex timestamps syslog
 If &%syslog_timestamp%& is set false, the timestamps on Exim's log lines are
 omitted when these lines are sent to syslog. See chapter &<<CHAPlog>>& for
 details of Exim's logging.
@@ -17657,6 +18384,7 @@ unfortunately not all, operating systems.
 .cindex "TLS" "advertising"
 .cindex "encryption" "on SMTP connection"
 .cindex "SMTP" "encrypted connection"
+.cindex "ESMTP extensions" STARTTLS
 When Exim is built with support for TLS encrypted connections, the availability
 of the STARTTLS command to set up an encrypted session is advertised in
 response to EHLO only to those client hosts that match this option. See
@@ -17666,7 +18394,18 @@ using the &%tls_certificate%& option.  If TLS support for incoming connections
 is not required the &%tls_advertise_hosts%& option should be set empty.
 
 
-.option tls_certificate main string list&!! unset
+.option tls_alpn main "string list&!!" "smtp : esmtp"
+.cindex TLS "Application Layer Protocol Names"
+.cindex TLS ALPN
+.cindex ALPN "set acceptable names for server"
+If this option is set,
+the TLS library supports ALPN,
+and the client offers either more than
+ALPN name or a name which does not match the list,
+the TLS connection is declined.
+
+
+.option tls_certificate main "string list&!!" unset
 .cindex "TLS" "server certificate; location of"
 .cindex "certificate" "server, location of"
 The value of this option is expanded, and must then be a list of absolute paths to
@@ -17689,13 +18428,16 @@ when a list of more than one
 file is used, the &$tls_in_ourcert$& variable is unreliable.
 The macro "_TLS_BAD_MULTICERT_IN_OURCERT" will be defined for those versions.
 
+.cindex SNI "selecting server certificate based on"
 If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then
 if the OpenSSL build supports TLS extensions and the TLS client sends the
 Server Name Indication extension, then this option and others documented in
 &<<SECTtlssni>>& will be re-expanded.
 
-If this option is unset or empty a fresh self-signed certificate will be
-generated for every connection.
+If this option is unset or empty a self-signed certificate will be
+used.
+Under Linux this is generated at daemon startup; on other platforms it will be
+generated fresh for every connection.
 
 .option tls_crl main string&!! unset
 .cindex "TLS" "server certificate revocation list"
@@ -17738,12 +18480,7 @@ larger prime than requested.
 The value of this option is expanded and indicates the source of DH parameters
 to be used by Exim.
 
-This option is ignored for GnuTLS version 3.6.0 and later.
-The library manages parameter negotiation internally.
-
-&*Note: The Exim Maintainers strongly recommend,
-for other TLS library versions,
-using a filename with site-generated
+&*Note: The Exim Maintainers strongly recommend using a filename with site-generated
 local DH parameters*&, which has been supported across all versions of Exim.  The
 other specific constants available are a fallback so that even when
 "unconfigured", Exim can offer Perfect Forward Secrecy in older ciphersuites in TLS.
@@ -17794,8 +18531,15 @@ of the later IKE values, which led into RFC7919 providing new fixed constants
 (the "ffdhe" identifiers).
 
 At this point, all of the "ike" values should be considered obsolete;
-they're still in Exim to avoid breaking unusual configurations, but are
+they are still in Exim to avoid breaking unusual configurations, but are
 candidates for removal the next time we have backwards-incompatible changes.
+Two of them in particular (&`ike1`& and &`ike22`&) are called out by RFC 8247
+as MUST NOT use for IPSEC, and two more (&`ike23`& and &`ike24`&) as
+SHOULD NOT.
+Because of this, Exim regards them as deprecated; if either of the first pair
+are used, warnings will be logged in the paniclog, and if any are used then
+warnings will be logged in the mainlog.
+All four will be removed in a future Exim release.
 
 The TLS protocol does not negotiate an acceptable size for this; clients tend
 to hard-drop connections if what is offered by the server is unacceptable,
@@ -17872,7 +18616,7 @@ further details, see section &<<SECTsupobssmt>>&.
 
 
 
-.option tls_privatekey main string list&!! unset
+.option tls_privatekey main "string list&!!" unset
 .cindex "TLS" "server private key; location of"
 The value of this option is expanded, and must then be a list of absolute paths to
 files which contains the server's private keys.
@@ -17906,6 +18650,12 @@ preference order of the available ciphers. Details are given in sections
 &<<SECTreqciphssl>>& and &<<SECTreqciphgnu>>&.
 
 
+.option tls_resumption_hosts main "host list&!!" unset
+.cindex TLS resumption
+This option controls which connections to offer the TLS resumption feature.
+See &<<SECTresumption>>& for details.
+
+
 .option tls_try_verify_hosts main "host list&!!" unset
 .cindex "TLS" "client certificate verification"
 .cindex "certificate" "verification of client"
@@ -17940,7 +18690,9 @@ than the public cert of individual clients.  With both OpenSSL and GnuTLS, if
 the value is a file then the certificates are sent by Exim as a server to
 connecting clients, defining the list of accepted certificate authorities.
 Thus the values defined should be considered public data.  To avoid this,
-use the explicit directory version.
+use the explicit directory version. (If your peer is Exim up to 4.85,
+using GnuTLS, you may need to send the CAs (thus using the file
+variant). Otherwise the peer doesn't send its certificate.)
 
 See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
 
@@ -17960,7 +18712,8 @@ either &%tls_verify_hosts%& or &%tls_try_verify_hosts%& is set and
 Any client that matches &%tls_verify_hosts%& is constrained by
 &%tls_verify_certificates%&. When the client initiates a TLS session, it must
 present one of the listed certificates. If it does not, the connection is
-aborted. &*Warning*&: Including a host in &%tls_verify_hosts%& does not require
+aborted.
+&*Warning*&: Including a host in &%tls_verify_hosts%& does not require
 the host to use TLS. It can still send SMTP commands through unencrypted
 connections. Forcing a client to use TLS has to be done separately using an
 ACL to reject inappropriate commands when the connection is not encrypted.
@@ -18094,14 +18847,18 @@ regular expression by a parenthesized subpattern. The default value for
 See &%uucp_from_pattern%& above.
 
 
-.option warn_message_file main string unset
+.option warn_message_file main string&!! unset
 .cindex "warning of delay" "customizing the message"
 .cindex "customizing" "warning message"
 This option defines a template file containing paragraphs of text to be used
 for constructing the warning message which is sent by Exim when a message has
 been in the queue for a specified amount of time, as specified by
 &%delay_warning%&. Details of the file's contents are given in chapter
-&<<CHAPemsgcust>>&. See also &%bounce_message_file%&.
+&<<CHAPemsgcust>>&.
+.cindex warn_message_file "tainted data"
+The option is expanded to give the file path, which must be
+absolute and untainted.
+See also &%bounce_message_file%&.
 
 
 .option write_rejectlog main boolean true
@@ -18129,6 +18886,9 @@ which the preconditions are tested. The order of expansion of the options that
 provide data for a transport is: &%errors_to%&, &%headers_add%&,
 &%headers_remove%&, &%transport%&.
 
+The name of a router is limited to be &drivernamemax; ASCII characters long;
+prior to Exim 4.95 names would be silently truncated at this length, but now
+it is enforced.
 
 
 .option address_data routers string&!! unset
@@ -18255,7 +19015,11 @@ address (with affixes removed if relevant) is the name of an account on the
 local system. The check is done by calling the &[getpwnam()]& function rather
 than trying to read &_/etc/passwd_& directly. This means that other methods of
 holding password data (such as NIS) are supported. If the local part is a local
-user, &$home$& is set from the password data, and can be tested in other
+user,
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using router check_local_user option"
+&$local_part_data$& is set to an untainted version of the local part and
+&$home$& is set from the password data. The latter can be tested in other
 preconditions that are evaluated after this one (the order of evaluation is
 given in section &<<SECTrouprecon>>&). However, the value of &$home$& can be
 overridden by &%router_home_directory%&. If the local part is not a local user,
@@ -18382,7 +19146,7 @@ transport option of the same name.
 .cindex "security" "MX lookup"
 .cindex "DNS" "DNSSEC"
 DNS lookups for domains matching &%dnssec_request_domains%& will be done with
-the dnssec request bit set.
+the DNSSEC request bit set.
 This applies to all of the SRV, MX, AAAA, A lookup sequence.
 
 .option dnssec_require_domains routers "domain list&!!" unset
@@ -18391,7 +19155,7 @@ This applies to all of the SRV, MX, AAAA, A lookup sequence.
 .cindex "security" "MX lookup"
 .cindex "DNS" "DNSSEC"
 DNS lookups for domains matching &%dnssec_require_domains%& will be done with
-the dnssec request bit set.  Any returns not having the Authenticated Data bit
+the DNSSEC request bit set.  Any returns not having the Authenticated Data bit
 (AD bit) set will be ignored and logged as a host-lookup failure.
 This applies to all of the SRV, MX, AAAA, A lookup sequence.
 
@@ -18402,7 +19166,8 @@ This applies to all of the SRV, MX, AAAA, A lookup sequence.
 If this option is set, the router is skipped unless the current domain matches
 the list. If the match is achieved by means of a file lookup, the data that the
 lookup returned for the domain is placed in &$domain_data$& for use in string
-expansions of the driver's private options. See section &<<SECTrouprecon>>& for
+expansions of the driver's private options and in the transport.
+See section &<<SECTrouprecon>>& for
 a list of the order in which preconditions are evaluated.
 
 
@@ -18584,15 +19349,17 @@ avoided. The &%repeat_use%& option of the &%redirect%& router may be of help.
 This option specifies a list of text headers,
 colon-separated (by default, changeable in the usual way &<<SECTlistsepchange>>&),
 that is associated with any addresses that are accepted by the router.
-Each item is separately expanded, at routing time.  However, this
-option has no effect when an address is just being verified. The way in which
+However, the option has no effect when an address is just being verified.
+Each list item is separately expanded, at transport time.
+If an item ends in *, it will match any header with the given prefix.
+The way in which
 the text is used to remove header lines at transport time is described in
 section &<<SECTheadersaddrem>>&. Header lines are not actually removed until
 the message is in the process of being transported. This means that references
 to header lines in string expansions in the transport's configuration still
 &"see"& the original header lines.
 
-The &%headers_remove%& option is expanded after &%errors_to%& and
+The &%headers_remove%& option is handled after &%errors_to%& and
 &%headers_add%&, but before &%transport%&. If an item expansion is forced to fail,
 the item has no effect. Other expansion failures are treated as configuration
 errors.
@@ -18697,6 +19464,10 @@ command for LMTP, SMTP, and BSMTP deliveries has the prefix removed by default.
 This behaviour can be overridden by setting &%rcpt_include_affixes%& true on
 the relevant transport.
 
+.vindex &$local_part_prefix_v$&
+If wildcarding (above) was used then the part of the prefix matching the
+wildcard is available in &$local_part_prefix_v$&.
+
 When an address is being verified, &%local_part_prefix%& affects only the
 behaviour of the router. If the callout feature of verification is in use, this
 means that the full address, including the prefix, will be used during the
@@ -18759,12 +19530,13 @@ section &<<SECTlocparlis>>& for a discussion of local part lists. Because the
 string is expanded, it is possible to make it depend on the domain, for
 example:
 .code
-local_parts = dbm;/usr/local/specials/$domain
+local_parts = dbm;/usr/local/specials/$domain_data
 .endd
 .vindex "&$local_part_data$&"
 If the match is achieved by a lookup, the data that the lookup returned
 for the local part is placed in the variable &$local_part_data$& for use in
-expansions of the router's private options. You might use this option, for
+expansions of the router's private options or in the transport.
+You might use this option, for
 example, if you have a large number of local virtual domains, and you want to
 send all postmaster mail to the same place without having to set up an alias in
 each virtual domain:
@@ -18902,7 +19674,7 @@ but the user is specified symbolically, the gid associated with the uid is
 used. For example:
 .code
 require_files = mail:/some/file
-require_files = $local_part:$home/.procmailrc
+require_files = $local_part_data:$home/.procmailrc
 .endd
 If a user or group name in a &%require_files%& list does not exist, the
 &%require_files%& condition fails.
@@ -19109,6 +19881,8 @@ Values containing a list-separator should have them doubled.
 When a router runs, the strings are evaluated in order,
 to create variables which are added to the set associated with
 the address.
+This is done immediately after all the preconditions, before the
+evaluation of the &%address_data%& option.
 The variable is set with the expansion of the value.
 The variables can be used by the router options
 (not including any preconditions)
@@ -20035,8 +20809,10 @@ semicolon is the default route list separator.
 
 
 .section "Format of one host item" "SECTformatonehostitem"
-Each item in the list of hosts is either a host name or an IP address,
-optionally with an attached port number. When no port is given, an IP address
+Each item in the list of hosts can be either a host name or an IP address,
+optionally with an attached port number, or it can be a single "+"
+(see &%hosts_randomize%&).
+When no port is given, an IP address
 is not enclosed in brackets. When a port is specified, it overrides the port
 specification on the transport. The port is separated from the name or address
 by a colon. This leads to some complications:
@@ -20528,6 +21304,17 @@ is not the case when the file contains syntactically valid items that happen to
 yield empty addresses, for example, items containing only RFC 2822 address
 comments.
 
+.cindex "tainted data" "in filenames"
+.cindex redirect "tainted data"
+Tainted data may not be used for a filename.
+
+&*Warning*&: It is unwise to use &$local_part$& or &$domain$&
+directly for redirection,
+as they are provided by a potential attacker.
+In the examples above, &$local_part$& is used for looking up data held locally
+on the system, and not used directly (the second example derives &$home$& via
+the passsword file or database, using &$local_part$&).
+
 
 
 .section "Forward files and address verification" "SECID125"
@@ -20753,6 +21540,9 @@ It must be given as
 .code
 list1:   :include:/opt/lists/list1
 .endd
+.cindex "tainted data" "in filenames"
+.cindex redirect "tainted data"
+Tainted data may not be used for a filename.
 .next
 .cindex "address redirection" "to black hole"
 .cindex "delivery" "discard"
@@ -20804,7 +21594,7 @@ The text is not included in the response to an EXPN command. In non-SMTP cases
 the text is included in the error message that Exim generates.
 
 .cindex "SMTP" "error codes"
-By default, Exim sends a 451 SMTP code for a &':defer:'&, and 550 for
+By default for verify, Exim sends a 451 SMTP code for a &':defer:'&, and 550 for
 &':fail:'&. However, if the message starts with three digits followed by a
 space, optionally followed by an extended code of the form &'n.n.n'&, also
 followed by a space, and the very first digit is the same as the default error
@@ -21513,7 +22303,7 @@ local_users:
 # This transport overrides the group
 group_delivery:
   driver = appendfile
-  file = /var/spool/mail/$local_part
+  file = /var/spool/mail/$local_part_data
   group = mail
 .endd
 If &%user%& is set for a transport, its value overrides what is set in the
@@ -21641,6 +22431,10 @@ and &$original_domain$& is never set.
 .scindex IIDgenoptra1 "generic options" "transport"
 .scindex IIDgenoptra2 "options" "generic; for transports"
 .scindex IIDgenoptra3 "transport" "generic options for"
+The name of a transport is limited to be &drivernamemax; ASCII characters long;
+prior to Exim 4.95 names would be silently truncated at this length, but now
+it is enforced.
+
 The following generic options apply to all transports:
 
 
@@ -21710,6 +22504,12 @@ header, Exim has a configuration option (&%envelope_to_remove%&) which requests
 its removal from incoming messages, so that delivered messages can safely be
 resent to other recipients.
 
+&*Note:*& If used on a transport handling multiple recipients
+(the smtp transport unless &%rcpt_max%& is 1, the appendfile, pipe or lmtp
+transport if &%batch_max%& is greater than 1)
+then information about Bcc recipients will be leaked.
+Doing so is generally not advised.
+
 
 .option event_action transports string&!! unset
 .cindex events
@@ -21753,15 +22553,19 @@ checked, since this option does not automatically suppress them.
 .option headers_remove transports list&!! unset
 .cindex "header lines" "removing"
 .cindex "transport" "header lines; removing"
-This option specifies a list of header names,
-colon-separated (by default, changeable in the usual way &<<SECTlistsepchange>>&);
-these headers are omitted from the message as it is transported, as described
-in section &<<SECTheadersaddrem>>&. Header removal can also be specified by
-routers.
+This option specifies a list of text headers,
+colon-separated (by default, changeable in the usual way &<<SECTlistsepchange>>&),
+to be removed from the message.
+However, the option has no effect when an address is just being verified.
 Each list item is separately expanded.
 If the result of the expansion is an empty string, or if the expansion
 is forced to fail, no action is taken. Other expansion failures are treated as
 errors and cause the delivery to be deferred.
+If an item ends in *, it will match any header with the given prefix.
+
+Matching headers are omitted from the message as it is transported, as described
+in section &<<SECTheadersaddrem>>&. Header removal can also be specified by
+routers.
 
 Unlike most options, &%headers_remove%& can be specified multiple times
 for a transport; all listed headers are removed.
@@ -21936,7 +22740,7 @@ This defaults to the incoming sender address, but can be changed by setting
 
 
 .option return_path_add transports boolean false
-.cindex "&'Return-path:'& header line"
+.chindex Return-path:
 If this option is true, a &'Return-path:'& header is added to the message.
 Although the return path is normally available in the prefix line of BSD
 mailboxes, this is commonly not displayed by MUAs, and so the user does not
@@ -22022,7 +22826,7 @@ message. For example, a content scan could insert a new header line containing
 a spam score. This could be interpreted by a filter in the user's MUA. It is
 not possible to discard a message at this stage.
 
-.cindex "SMTP" "SIZE"
+.cindex "SIZE" "ESMTP extension"
 A problem might arise if the filter increases the size of a message that is
 being sent down an SMTP connection. If the receiving SMTP server has indicated
 support for the SIZE parameter, Exim will have sent the size of the message
@@ -22047,9 +22851,10 @@ an ideal name for this feature here, but as it was already implemented for the
 The expansion variables &$host$& and &$host_address$& are available when the
 transport is a remote one. They contain the name and IP address of the host to
 which the message is being sent. For example:
+. used to have $sender_address in this cmdline, but it's tainted
 .code
 transport_filter = /some/directory/transport-filter.pl \
-  $host $host_address $sender_address $pipe_addresses
+  $host $host_address $pipe_addresses
 .endd
 
 Two problems arise if you want to use more complicated expansion items to
@@ -22312,6 +23117,17 @@ If &%file%& or &%directory%& is set for a delivery from a redirection, it is
 used to determine the file or directory name for the delivery. Normally, the
 contents of &$address_file$& are used in some way in the string expansion.
 .endlist
+If the &%create_file%& option is set to a path which
+matches (see the option definition below for details)
+a file or directory name
+for the delivery, that name becomes de-tainted.
+
+.cindex "tainted data" "in filenames"
+.cindex appendfile "tainted data"
+Tainted data may not be used for a file or directory name.
+This means that, for instance, &$local_part$& cannot be used directly
+as a component of a path.  It can however be used as the key for a lookup
+which returns a path (or component).
 
 
 .cindex "Sieve filter" "configuring &(appendfile)&"
@@ -22334,7 +23150,7 @@ is used as a result of a &"keep"& action in the filter. This example shows one
 way of handling this requirement:
 .code
 file = ${if eq{$address_file}{inbox} \
-            {/var/mail/$local_part} \
+            {/var/mail/$local_part_data} \
             {${if eq{${substr_0_1:$address_file}}{/} \
                   {$address_file} \
                   {$home/mail/$address_file} \
@@ -22454,13 +23270,30 @@ delivery, it applies to the top level directory, not the maildir directories
 beneath.
 
 The option must be set to one of the words &"anywhere"&, &"inhome"&, or
-&"belowhome"&. In the second and third cases, a home directory must have been
-set for the transport. This option is not useful when an explicit filename is
+&"belowhome"&, or to an absolute path.
+
+In the second and third cases, a home directory must have been
+set for the transport, and the file or directory being created must
+reside within it.
+The "belowhome" checking additionally checks for attempts to use "../"
+to evade the testing.
+This option is not useful when an explicit filename is
 given for normal mailbox deliveries. It is intended for the case when filenames
 are generated from users' &_.forward_& files. These are usually handled
 by an &(appendfile)& transport called &%address_file%&. See also
 &%file_must_exist%&.
 
+In the fourth case,
+the value given for this option must be an absolute path for an
+existing directory.
+The value is used for checking instead of a home directory;
+checking is done in "belowhome" mode.
+
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using appendfile create_file option"
+If "belowhome" checking is used, the file or directory path
+becomes de-tainted.
+
 
 .option directory appendfile string&!! unset
 This option is mutually exclusive with the &%file%& option, but one of &%file%&
@@ -22473,6 +23306,9 @@ appended to a single mailbox file. A number of different formats are provided
 (see &%maildir_format%& and &%mailstore_format%&), and see section
 &<<SECTopdir>>& for further details of this form of delivery.
 
+The result of expansion must not be tainted, unless the &%create_file%& option
+specifies a path.
+
 
 .option directory_file appendfile string&!! "see below"
 .cindex "base62"
@@ -22505,6 +23341,9 @@ specifies a single file, to which the message is appended. One or more of
 &%use_fcntl_lock%&, &%use_flock_lock%&, or &%use_lockfile%& must be set with
 &%file%&.
 
+The result of expansion must not be tainted, unless the &%create_file%& option
+specifies a path.
+
 .cindex "NFS" "lock file"
 .cindex "locking files"
 .cindex "lock files"
@@ -22515,8 +23354,8 @@ The string value is expanded for each delivery, and must yield an absolute
 path. The most common settings of this option are variations on one of these
 examples:
 .code
-file = /var/spool/mail/$local_part
-file = /home/$local_part/inbox
+file = /var/spool/mail/$local_part_data
+file = /home/$local_part_data/inbox
 file = $home/inbox
 .endd
 .cindex "&""sticky""& bit"
@@ -23272,7 +24111,7 @@ and directories in a maildir mailbox, including subdirectories for maildir++
 folders. Consider this example:
 .code
 maildir_format = true
-directory = /var/mail/$local_part\
+directory = /var/mail/$local_part_data\
            ${if eq{$local_part_suffix}{}{}\
            {/.${substr_1:$local_part_suffix}}}
 maildirfolder_create_regex = /\.[^/]+$
@@ -23749,6 +24588,10 @@ directories are also controllable. See chapter &<<CHAPenvironment>>& for
 details of the local delivery environment and chapter &<<CHAPbatching>>&
 for a discussion of local delivery batching.
 
+.cindex "tainted data" "in pipe command"
+.cindex pipe "tainted data"
+Tainted data may not be used for the command name.
+
 
 .section "Concurrent delivery" "SECID140"
 If two messages arrive at almost the same time, and both are routed to a pipe
@@ -23883,6 +24726,9 @@ This list is a compromise for maximum compatibility with other MTAs. Note that
 the &%environment%& option can be used to add additional variables to this
 environment. The environment for the &(pipe)& transport is not subject
 to the &%add_environment%& and &%keep_environment%& main config options.
+&*Note*&: Using enviroment variables loses track of tainted data.
+Writers of &(pipe)& transport commands should be wary of data supplied
+by potential attackers.
 .display
 &`DOMAIN            `&   the domain of the address
 &`HOME              `&   the home directory, if set
@@ -23974,6 +24820,9 @@ the &%path%& option below). The command is split up into separate arguments by
 Exim, and each argument is separately expanded, as described in section
 &<<SECThowcommandrun>>& above.
 
+.cindex "tainted data"
+No part of the resulting command may be tainted.
+
 
 .option environment pipe string&!! unset
 .cindex "&(pipe)& transport" "environment for command"
@@ -24256,14 +25105,14 @@ configuration for &%procmail%&:
 # transport
 procmail_pipe:
   driver = pipe
-  command = /usr/local/bin/procmail -d $local_part
+  command = /usr/local/bin/procmail -d $local_part_data
   return_path_add
   delivery_date_add
   envelope_to_add
   check_string = "From "
   escape_string = ">From "
   umask = 077
-  user = $local_part
+  user = $local_part_data
   group = mail
 
 # router
@@ -24289,12 +25138,15 @@ use a shell to run pipe commands.
 .cindex "Cyrus"
 The next example shows a transport and a router for a system where local
 deliveries are handled by the Cyrus IMAP server.
+. Used to have R: local_part_suffix = .* +  T:   -m $local_part_suffix_v
+. but that suffix is tainted so cannot be used in a command arg
+. Really, you'd want to use a lookup for acceptable suffixes to do real detainting
 .code
 # transport
 local_delivery_cyrus:
   driver = pipe
   command = /usr/cyrus/bin/deliver \
-            -m ${substr_1:$local_part_suffix} -- $local_part
+            -- $local_part_data
   user = cyrus
   group = mail
   return_output
@@ -24306,7 +25158,6 @@ local_delivery_cyrus:
 local_user_cyrus:
   driver = accept
   check_local_user
-  local_part_suffix = .*
   transport = local_delivery_cyrus
 .endd
 Note the unsetting of &%message_prefix%& and &%message_suffix%&, and the use of
@@ -24454,12 +25305,14 @@ authenticated as a client.
 
 
 .option command_timeout smtp time 5m
+.cindex timeout "smtp transport command"
 This sets a timeout for receiving a response to an SMTP command that has been
 sent out. It is also used when waiting for the initial banner line from the
 remote host. Its value must not be zero.
 
 
 .option connect_timeout smtp time 5m
+.cindex timeout "smtp transport connect"
 This sets a timeout for the &[connect()]& function, which sets up a TCP/IP call
 to a remote host. A setting of zero allows the system timeout (typically
 several minutes) to act. To have any effect, the value of this option must be
@@ -24495,6 +25348,7 @@ be treated as unset and &%tls_require_ciphers%& will be used instead.
 
 
 .option data_timeout smtp time 5m
+.cindex timeout "for transmitted SMTP data blocks"
 This sets a timeout for the transmission of each block in the data portion of
 the message. As a result, the overall timeout for a message depends on the size
 of the message. Its value must not be zero. See also &%final_timeout%&.
@@ -24502,7 +25356,7 @@ of the message. Its value must not be zero. See also &%final_timeout%&.
 
 .option dkim_canon smtp string&!! unset
 DKIM signing option.  For details see section &<<SECDKIMSIGN>>&.
-.option dkim_domain smtp string list&!! unset
+.option dkim_domain smtp "string list&!!" unset
 DKIM signing option.  For details see section &<<SECDKIMSIGN>>&.
 .option dkim_hash smtp string&!! sha256
 DKIM signing option.  For details see section &<<SECDKIMSIGN>>&.
@@ -24565,7 +25419,7 @@ details.
 .cindex "security" "MX lookup"
 .cindex "DNS" "DNSSEC"
 DNS lookups for domains matching &%dnssec_request_domains%& will be done with
-the dnssec request bit set. Setting this transport option is only useful if the
+the DNSSEC request bit set. Setting this transport option is only useful if the
 transport overrides or sets the host names. See the &%dnssec_request_domains%&
 router option.
 
@@ -24577,7 +25431,7 @@ router option.
 .cindex "security" "MX lookup"
 .cindex "DNS" "DNSSEC"
 DNS lookups for domains matching &%dnssec_require_domains%& will be done with
-the dnssec request bit set.  Setting this transport option is only
+the DNSSEC request bit set.  Setting this transport option is only
 useful if the transport overrides or sets the host names. See the
 &%dnssec_require_domains%& router option.
 
@@ -24633,6 +25487,7 @@ fails"& facility.
 
 
 .option final_timeout smtp time 10m
+.cindex timeout "for transmitted SMTP data accept"
 This is the timeout that applies while waiting for the response to the final
 line containing just &"."& that terminates a message. Its value must not be
 zero.
@@ -24668,12 +25523,43 @@ servers or different local IP addresses. For example, if you want the string
 that is used for &%helo_data%& to be obtained by a DNS lookup of the outgoing
 interface address, you could use this:
 .code
-helo_data = ${lookup dnsdb{ptr=$sending_ip_address}{$value}\
+helo_data = ${lookup dnsdb{ptr=$sending_ip_address} \
+  {${listextract{1}{<\n $value}}} \
   {$primary_hostname}}
 .endd
 The use of &%helo_data%& applies both to sending messages and when doing
 callouts.
 
+.option host_name_extract smtp "string list&!!" "see below"
+.cindex "load balancer" "hosts behind"
+.cindex TLS resumption
+Some mail-accepting sites
+(notably Microsoft)
+operate many servers behind a network load-balancer.  When this is done,
+with separated TLS session caches, TLS session resuption becomes problematic.
+It will only succeed when the same server happens to be selected by the
+load-balancer, matching the session stored in the client's cache.
+
+Exim can pull out a server name, if there is one, from the response to the
+client's SMTP EHLO command.
+The default value of this option:
+.code
+    ${if and { {match {$host} {.outlook.com\$}} \
+               {match {$item} {\N^250-([\w.]+)\s\N}} \
+	     } {$1}}
+.endd
+suffices for one known case.
+During the expansion of this option the &$item$& variable will have the
+server's EHLO response.
+The result of the option expansion is included in the key used to store and
+retrieve the TLS session, for session resumption.
+
+Operators of high-load sites may wish to evaluate their logs for indications
+of other destination sites operating load-balancers, and develop a suitable
+expression for this option.
+The smtp:ehlo event and the &$tls_out_resumption$& variable
+will be useful for such work.
+
 .option hosts smtp "string list&!!" unset
 Hosts are associated with an address by a router such as &(dnslookup)&, which
 finds the hosts by looking up the address domain in the DNS, or by
@@ -24721,12 +25607,13 @@ facilities such as AUTH, PIPELINING, SIZE, and STARTTLS.
 
 .option hosts_avoid_pipelining smtp "host list&!!" unset
 .cindex "PIPELINING" "avoiding the use of"
-Exim will not use the SMTP PIPELINING extension when delivering to any host
+.cindex "ESMTP extensions" PIPELINING
+Exim will not use the ESMTP PIPELINING extension when delivering to any host
 that matches this list, even if the server host advertises PIPELINING support.
 
 .option hosts_pipe_connect smtp "host list&!!" unset
 .cindex "pipelining" "early connection"
-.cindex "pipelining" PIPE_CONNECT
+.cindex "pipelining" PIPECONNECT
 If Exim is built with the SUPPORT_PIPE_CONNECT build option
 this option controls which to hosts the facility watched for
 and recorded, and used for subsequent connections.
@@ -24740,7 +25627,8 @@ so combines well with TCP Fast Open.
 See also the &%pipelining_connect_advertise_hosts%& main option.
 
 Note:
-When the facility is used, the transport &%helo_data%& option
+When the facility is used, if the transport &%interface%& option is unset
+the &%helo_data%& option
 will be expanded before the &$sending_ip_address$& variable
 is filled in.
 A check is made for the use of that variable, without the
@@ -24851,14 +25739,26 @@ Exim will request a Certificate Status on a
 TLS session for any host that matches this list.
 &%tls_verify_certificates%& should also be set for the transport.
 
+.option hosts_require_alpn smtp "host list&!!" unset
+.cindex ALPN "require negotiation in client"
+.cindex TLS ALPN
+.cindex TLS "Application Layer Protocol Names"
+If the TLS library supports ALPN
+then a successful negotiation of ALPN will be required for any host
+matching the list, for TLS to be used.
+See also the &%tls_alpn%& option.
+
+&*Note*&: prevention of fallback to in-clear connection is not
+managed by this option; see &%hosts_require_tls%&.
+
 .option hosts_require_dane smtp "host list&!!" unset
 .cindex DANE "transport options"
 .cindex DANE "requiring for certain servers"
 If built with DANE support, Exim  will require that a DNSSEC-validated
 TLSA record is present for any host matching the list,
-and that a DANE-verified TLS connection is made. See
-the &%dnssec_request_domains%& router and transport options.
+and that a DANE-verified TLS connection is made.
 There will be no fallback to in-clear communication.
+See the &%dnssec_request_domains%& router and transport options.
 See section &<<SECDANE>>&.
 
 .option hosts_require_ocsp smtp "host list&!!" unset
@@ -24878,9 +25778,10 @@ incoming messages, use an appropriate ACL.
 .cindex "authentication" "optional in client"
 This option provides a list of servers to which, provided they announce
 authentication support, Exim will attempt to authenticate as a client when it
-connects. If authentication fails, Exim will try to transfer the message
-unauthenticated. See also &%hosts_require_auth%&, and chapter
-&<<CHAPSMTPAUTH>>& for details of authentication.
+connects. If authentication fails
+and &%hosts_require_auth%& permits,
+Exim will try to transfer the message unauthenticated.
+See also chapter &<<CHAPSMTPAUTH>>& for details of authentication.
 
 .option hosts_try_chunking smtp "host list&!!" *
 .cindex CHUNKING "enabling, in client"
@@ -24888,19 +25789,18 @@ unauthenticated. See also &%hosts_require_auth%&, and chapter
 .cindex "RFC 3030" "CHUNKING"
 This option provides a list of servers to which, provided they announce
 CHUNKING support, Exim will attempt to use BDAT commands rather than DATA.
-.new
 Unless DKIM signing is being done,
-.wen
 BDAT will not be used in conjunction with a transport filter.
 
 .option hosts_try_dane smtp "host list&!!" *
 .cindex DANE "transport options"
 .cindex DANE "attempting for certain servers"
-If built with DANE support, Exim  will require that a DNSSEC-validated
-TLSA record is present for any host matching the list,
-and that a DANE-verified TLS connection is made. See
-the &%dnssec_request_domains%& router and transport options.
-There will be no fallback to in-clear communication.
+If built with DANE support, Exim  will look up a
+TLSA record for any host matching the list,
+If one is found and that lookup was DNSSEC-validated,
+then Exim requires that a DANE-verified TLS connection is made for that host;
+there will be no fallback to in-clear communication.
+See the &%dnssec_request_domains%& router and transport options.
 See section &<<SECDANE>>&.
 
 .option hosts_try_fastopen smtp "host list&!!" *
@@ -24925,6 +25825,7 @@ such as DNSBL lookups, will still delay the emission of the SMTP banner.
 
 .option hosts_try_prdr smtp "host list&!!" *
 .cindex "PRDR" "enabling, optional in client"
+.cindex "ESMTP extensions" PRDR
 This option provides a list of servers to which, provided they announce
 PRDR support, Exim will attempt to negotiate PRDR
 for multi-recipient messages.
@@ -24984,7 +25885,19 @@ has advertised support for IGNOREQUOTA in its response to the LHLO command.
 This option limits the number of RCPT commands that are sent in a single
 SMTP message transaction. Each set of addresses is treated independently, and
 so can cause parallel connections to the same host if &%remote_max_parallel%&
-permits this.
+permits this. A value setting of zero disables the limit.
+
+
+.option message_linelength_limit smtp integer 998
+.cindex "line length" limit
+This option sets the maximum line length, in bytes, that the transport
+will send.  Any messages with lines exceeding the given value
+will fail and a failure-DSN ("bounce") message will if possible be returned
+to the sender.
+The default value is that defined by the SMTP standards.
+
+It is generally wise to also check in the data ACL so that messages
+received via SMTP can be refused without producing a bounce.
 
 
 .option multi_domain smtp boolean&!! true
@@ -25000,6 +25913,10 @@ It is expanded per-address and can depend on any of
 &$address_data$&, &$domain_data$&, &$local_part_data$&,
 &$host$&, &$host_address$& and &$host_port$&.
 
+If the connection is DANE-enabled then this option is ignored;
+only messages having the domain used for the DANE TLSA lookup are
+sent on the connection.
+
 .option port smtp string&!! "see below"
 .cindex "port" "sending TCP/IP"
 .cindex "TCP/IP" "setting outgoing port"
@@ -25037,7 +25954,7 @@ If this option is set to &"smtps"&, the default value for the &%port%& option
 changes to &"smtps"&, and the transport initiates TLS immediately after
 connecting, as an outbound SSL-on-connect, instead of using STARTTLS to upgrade.
 The Internet standards bodies used to strongly discourage use of this mode,
-but as of RFC 8314 it is perferred over STARTTLS for message submission
+but as of RFC 8314 it is preferred over STARTTLS for message submission
 (as distinct from MTA-MTA communication).
 
 
@@ -25082,7 +25999,7 @@ See also the &%max_parallel%& generic transport option.
 
 
 .option size_addition smtp integer 1024
-.cindex "SMTP" "SIZE"
+.cindex "SIZE" "ESMTP extension"
 .cindex "message" "size issue for transport filter"
 .cindex "size" "of message"
 .cindex "transport" "filter"
@@ -25104,6 +26021,19 @@ This option enables use of SOCKS proxies for connections made by the
 transport.  For details see section &<<SECTproxySOCKS>>&.
 
 
+.option tls_alpn smtp string&!! unset
+.cindex TLS "Application Layer Protocol Names"
+.cindex TLS ALPN
+.cindex ALPN "set name in client"
+If this option is set
+and the TLS library supports ALPN,
+the value given is used.
+
+As of writing no value has been standardised for email use.
+The authors suggest using &"smtp"&.
+
+
+
 .option tls_certificate smtp string&!! unset
 .cindex "TLS" "client certificate, location of"
 .cindex "certificate" "client, location of"
@@ -25168,11 +26098,21 @@ is used in different ways by OpenSSL and GnuTLS (see sections
 ciphers is a preference order.
 
 
+.option tls_resumption_hosts smtp "host list&!!" unset
+.cindex TLS resumption
+This option controls which connections to use the TLS resumption feature.
+See &<<SECTresumption>>& for details.
+
+
 
 .option tls_sni smtp string&!! unset
 .cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "setting in client"
 .vindex "&$tls_sni$&"
-If this option is set then it sets the $tls_out_sni variable and causes any
+If this option is set
+and the connection is not DANE-validated
+then it sets the $tls_out_sni variable and causes any
 TLS session to pass this value as the Server Name Indication extension to
 the remote side, which can be used by the remote side to select an appropriate
 certificate and private key for the session.
@@ -25266,14 +26206,22 @@ certificate verification must succeed.
 The &%tls_verify_certificates%& option must also be set.
 If both this option and &%tls_try_verify_hosts%& are unset
 operation is as if this option selected all hosts.
+&*Warning*&: Including a host in &%tls_verify_hosts%& does not require
+that connections use TLS.
+Fallback to in-clear communication will be done unless restricted by 
+the &%hosts_require_tls%& option.
 
-.option utf8_downconvert smtp integer!! unset
+.option utf8_downconvert smtp integer&!! -1
 .cindex utf8 "address downconversion"
 .cindex i18n "utf8 address downconversion"
 If built with internationalization support,
-this option controls conversion of UTF-8 in message addresses
+this option controls conversion of UTF-8 in message envelope addresses
 to a-label form.
-For details see section &<<SECTi18nMTA>>&.
+If, after expansion, the value is 1, 0, or -1 then this value overrides
+any value previously set for the message.  Otherwise, any previously
+set value is used.  To permit use of a previous value,
+set this option to an empty string.
+For details on the values see section &<<SECTi18nMTA>>&.
 
 
 
@@ -26380,7 +27328,12 @@ permitted to use it as a relay. SMTP authentication is not of relevance to the
 transfer of mail between servers that have no managerial connection with each
 other.
 
+The name of an authenticator is limited to be &drivernamemax; ASCII characters long;
+prior to Exim 4.95 names would be silently truncated at this length, but now
+it is enforced.
+
 .cindex "AUTH" "description of"
+.cindex "ESMTP extensions" AUTH
 Very briefly, the way SMTP authentication works is as follows:
 
 .ilist
@@ -26671,7 +27624,7 @@ conditions:
 .ilist
 The client host must match &%auth_advertise_hosts%& (default *).
 .next
-It the &%server_advertise_condition%& option is set, its expansion must not
+If the &%server_advertise_condition%& option is set, its expansion must not
 yield the empty string, &"0"&, &"no"&, or &"false"&.
 .endlist
 
@@ -26779,7 +27732,7 @@ encode '\0user@domain.com\0pas$$word'
 .endd
 gives an incorrect answer because of the unescaped &"@"& and &"$"& characters.
 
-If you have the &%mimencode%& command installed, another way to do produce
+If you have the &%mimencode%& command installed, another way to produce
 base64-encoded strings is to run the command
 .code
 echo -e -n `\0user\0password' | mimencode
@@ -26942,7 +27895,7 @@ There are good and bad examples at the end of the next section.
 
 .section "The PLAIN authentication mechanism" "SECID172"
 .cindex "PLAIN authentication mechanism"
-.cindex "authentication" "PLAIN mechanism"
+.cindex authentication PLAIN
 .cindex "binary zero" "in &(plaintext)& authenticator"
 The PLAIN authentication mechanism (RFC 2595) specifies that three strings be
 sent as one item of data (that is, one combined string containing two NUL
@@ -27024,7 +27977,7 @@ writing the test makes the logic clearer.
 
 .section "The LOGIN authentication mechanism" "SECID173"
 .cindex "LOGIN authentication mechanism"
-.cindex "authentication" "LOGIN mechanism"
+.cindex authentication LOGIN
 The LOGIN authentication mechanism is not documented in any RFC, but is in use
 in a number of programs. No data is sent with the AUTH command. Instead, a
 user name and password are supplied separately, in response to prompts. The
@@ -27121,7 +28074,12 @@ fixed_plain:
   client_send = ^username^mysecret
 .endd
 The lack of colons means that the entire text is sent with the AUTH
-command, with the circumflex characters converted to NULs. A similar example
+command, with the circumflex characters converted to NULs.
+Note that due to the ambiguity of parsing three consectutive circumflex characters
+there is no way to provide a password having a leading circumflex.
+
+
+A similar example
 that uses the LOGIN mechanism is:
 .code
 fixed_login:
@@ -27145,7 +28103,7 @@ prompts.
 .scindex IIDcramauth1 "&(cram_md5)& authenticator"
 .scindex IIDcramauth2 "authenticators" "&(cram_md5)&"
 .cindex "CRAM-MD5 authentication mechanism"
-.cindex "authentication" "CRAM-MD5 mechanism"
+.cindex authentication CRAM-MD5
 The CRAM-MD5 authentication mechanism is described in RFC 2195. The server
 sends a challenge string to the client, and the response consists of a user
 name and the CRAM-MD5 digest of the challenge string combined with a secret
@@ -27363,7 +28321,7 @@ but it is present in many binary distributions.
 .scindex IIDdcotauth1 "&(dovecot)& authenticator"
 .scindex IIDdcotauth2 "authenticators" "&(dovecot)&"
 This authenticator is an interface to the authentication facility of the
-Dovecot POP/IMAP server, which can support a number of authentication methods.
+Dovecot 2 POP/IMAP server, which can support a number of authentication methods.
 Note that Dovecot must be configured to use auth-client not auth-userdb.
 If you are using Dovecot to authenticate POP/IMAP clients, it might be helpful
 to use the same mechanisms for SMTP authentication. This is a server
@@ -27394,6 +28352,27 @@ option is passed in the Dovecot authentication command. If, for a TLS
 connection, a client certificate has been verified, the &"valid-client-cert"&
 option is passed. When authentication succeeds, the identity of the user
 who authenticated is placed in &$auth1$&.
+
+The Dovecot configuration to match the above will look
+something like:
+.code
+conf.d/10-master.conf :-
+
+service auth {
+...
+#SASL
+  unix_listener auth-client {
+    mode = 0660
+    user = mail
+  }
+...
+}
+
+conf.d/10-auth.conf :-
+
+auth_mechanisms = plain login ntlm
+.endd
+
 .ecindex IIDdcotauth1
 .ecindex IIDdcotauth2
 
@@ -27411,21 +28390,76 @@ who authenticated is placed in &$auth1$&.
 .cindex "authentication" "LOGIN"
 .cindex "authentication" "DIGEST-MD5"
 .cindex "authentication" "CRAM-MD5"
-.cindex "authentication" "SCRAM-SHA-1"
-The &(gsasl)& authenticator provides server integration for the GNU SASL
+.cindex "authentication" "SCRAM family"
+The &(gsasl)& authenticator provides integration for the GNU SASL
 library and the mechanisms it provides.  This is new as of the 4.80 release
 and there are a few areas where the library does not let Exim smoothly
 scale to handle future authentication mechanisms, so no guarantee can be
 made that any particular new authentication mechanism will be supported
 without code changes in Exim.
 
-Exim's &(gsasl)& authenticator does not have client-side support at this
-time; only the server-side support is implemented.  Patches welcome.
+The library is expected to add support in an upcoming
+realease for the SCRAM-SHA-256 method.
+The macro _HAVE_AUTH_GSASL_SCRAM_SHA_256 will be defined
+when this happens.
 
+To see the list of mechanisms supported by the library run Exim with "auth" debug
+enabled and look for a line containing "GNU SASL supports".
+Note however that some may not have been tested from Exim.
 
-.option server_channelbinding gsasl boolean false
-Do not set this true without consulting a cryptographic engineer.
 
+.option client_authz gsasl string&!! unset
+This option can be used to supply an &'authorization id'&
+which is different to the &'authentication_id'& provided
+by &%client_username%& option.
+If unset or (after expansion) empty it is not used,
+which is the common case.
+
+.option client_channelbinding gsasl boolean false
+See &%server_channelbinding%& below.
+
+.option client_password gsasl string&!! unset
+This option is exapanded before use, and should result in
+the password to be used, in clear.
+
+.option client_username gsasl string&!! unset
+This option is exapanded before use, and should result in
+the account name to be used.
+
+
+.option client_spassword gsasl string&!! unset
+This option is only supported for library versions 1.9.1 and greater.
+The macro _HAVE_AUTH_GSASL_SCRAM_S_KEY will be defined when this is so.
+
+If a SCRAM mechanism is being used and this option is set
+and correctly sized
+it is used in preference to &%client_password%&.
+The value after expansion should be
+a 40 (for SHA-1) or 64 (for SHA-256) character string
+with the PBKDF2-prepared password, hex-encoded.
+
+Note that this value will depend on the salt and iteration-count
+supplied by the server.
+The option is expanded before use.
+During the expansion &$auth1$& is set with the client username,
+&$auth2$& with the iteration count, and
+&$auth3$& with the salt.
+
+The intent of this option
+is to support clients that can cache thes salted password
+to save on recalculation costs.
+The cache lookup should return an unusable value
+(eg. an empty string)
+if the salt or iteration count has changed
+
+If the authentication succeeds then the above variables are set,
+.vindex "&$auth4$&"
+plus the calculated salted password value value in &$auth4$&,
+during the expansion of the &%client_set_id%& option.
+A side-effect of this expansion can be used to prime the cache.
+
+
+.option server_channelbinding gsasl boolean false
 Some authentication mechanisms are able to use external context at both ends
 of the session to bind the authentication to that context, and fail the
 authentication process if that context differs.  Specifically, some TLS
@@ -27436,19 +28470,23 @@ This should have meant that certificate identity and verification becomes a
 non-issue, as a man-in-the-middle attack will cause the correct client and
 server to see different identifiers and authentication will fail.
 
-.new
 This is
 only usable by mechanisms which support "channel binding"; at time of
 writing, that's the SCRAM family.
-.wen
+When using this feature the "-PLUS" variants of the method names need to be used.
 
 This defaults off to ensure smooth upgrade across Exim releases, in case
 this option causes some clients to start failing.  Some future release
 of Exim might have switched the default to be true.
 
-However, Channel Binding in TLS has proven to be broken in current versions.
-Do not plan to rely upon this feature for security, ever, without consulting
-with a subject matter expert (a cryptographic engineer).
+. However, Channel Binding in TLS has proven to be vulnerable in current versions.
+. Do not plan to rely upon this feature for security, ever, without consulting
+. with a subject matter expert (a cryptographic engineer).
+
+This option was deprecated in previous releases due to doubts over
+the "Triple Handshake" vulnerability.
+Exim takes suitable precausions (requiring Extended Master Secret if TLS
+Session Resumption was used) for safety.
 
 
 .option server_hostname gsasl string&!! "see below"
@@ -27494,16 +28532,54 @@ This specifies the SASL realm that the server claims to be in.
 Some mechanisms will use this data.
 
 
-.option server_scram_iter gsasl string&!! unset
+.option server_scram_iter gsasl string&!! 4096
 This option provides data for the SCRAM family of mechanisms.
-&$auth1$& is not available at evaluation time.
-(This may change, as we receive feedback on use)
+The &$auth1$&, &$auth2$& and &$auth3$& variables are available
+when this option is expanded.
 
+The result of expansion should be a decimal number,
+and represents both a lower-bound on the security, and
+a compute cost factor imposed on the client
+(if it does not cache results, or the server changes
+either the iteration count or the salt).
+A minimum value of 4096 is required by the standards
+for all current SCRAM mechanism variants.
 
 .option server_scram_salt gsasl string&!! unset
 This option provides data for the SCRAM family of mechanisms.
-&$auth1$& is not available at evaluation time.
-(This may change, as we receive feedback on use)
+The &$auth1$&, &$auth2$& and &$auth3$& variables are available
+when this option is expanded.
+The value should be a base64-encoded string,
+of random data typically 4-to-16 bytes long.
+If unset or empty after expansion the library will provides a value for the
+protocol conversation.
+
+
+.option server_key gsasl string&!! unset
+.option server_skey gsasl string&!! unset
+These options can be used for the SCRAM family of mechanisms
+to provide stored information related to a password,
+the storage of which is preferable to plaintext.
+
+&%server_key%& is the value defined in the SCRAM standards as ServerKey;
+&%server_skey%& is StoredKey.
+
+They are only available for version 1.9.0 (or later) of the gsasl library.
+When this is so, the macros
+_OPT_AUTHENTICATOR_GSASL_SERVER_KEY
+and _HAVE_AUTH_GSASL_SCRAM_S_KEY
+will be defined.
+
+The &$authN$& variables are available when these options are expanded.
+
+If set, the results of expansion should for each
+should be a 28 (for SHA-1) or 44 (for SHA-256) character string
+of base64-coded data, and will be used in preference to the
+&%server_password%& option.
+If unset or not of the right length, &%server_password%& will be used.
+
+The libgsasl library release includes a utility &'gsasl'& which can be used
+to generate these values.
 
 
 .option server_service gsasl string &`smtp`&
@@ -27730,7 +28806,7 @@ and for clients to only attempt,
 this authentication method on a secure (eg. under TLS) connection.
 
 One possible use, compatible with the
-K-9 Mail Andoid client (&url(https://k9mail.github.io/)),
+K-9 Mail Android client (&url(https://k9mail.github.io/)),
 is for using X509 client certificates.
 
 It thus overlaps in function with the TLS authenticator
@@ -28083,6 +29159,10 @@ Some other recently added features may only be available in one or the other.
 This should be documented with the feature.  If the documentation does not
 explicitly state that the feature is infeasible in the other TLS
 implementation, then patches are welcome.
+.next
+The output from "exim -bV" will show which (if any) support was included
+in the build.
+Also, the macro "_HAVE_OPENSSL" or "_HAVE_GNUTLS" will be defined.
 .endlist
 
 
@@ -28308,6 +29388,7 @@ tls_require_ciphers = ${if =={$received_port}{25}\
 
 .section "Configuring an Exim server to use TLS" "SECID182"
 .cindex "TLS" "configuring an Exim server"
+.cindex "ESMTP extensions" STARTTLS
 When Exim has been built with TLS support, it advertises the availability of
 the STARTTLS command to client hosts that match &%tls_advertise_hosts%&,
 but not to any others. The default value of this option is *, which means
@@ -28555,6 +29636,59 @@ There is no current way to staple a proof for a client certificate.
 .endd
 
 
+.section "Caching of static server configuration items" "SECTserverTLScache"
+.cindex certificate caching
+.cindex privatekey caching
+.cindex crl caching
+.cindex ocsp caching
+.cindex ciphers caching
+.cindex "CA bundle" caching
+.cindex "certificate authorities" caching
+.cindex tls_certificate caching
+.cindex tls_privatekey caching
+.cindex tls_crl caching
+.cindex tls_ocsp_file caching
+.cindex tls_require_ciphers caching
+.cindex tls_verify_certificate caching
+.cindex caching certificate
+.cindex caching privatekey
+.cindex caching crl
+.cindex caching ocsp
+.cindex caching ciphers
+.cindex caching "certificate authorities
+If any of the main configuration options &%tls_certificate%&, &%tls_privatekey%&,
+&%tls_crl%& and &%tls_ocsp_file%& have values with no
+expandable elements,
+then the associated information is loaded at daemon startup.
+It is made available
+to child processes forked for handling received SMTP connections.
+
+This caching is currently only supported under Linux and FreeBSD.
+
+If caching is not possible, for example if an item has to be dependent
+on the peer host so contains a &$sender_host_name$& expansion, the load
+of the associated information is done at the startup of the TLS connection.
+
+The cache is invalidated and reloaded after any changes to the directories
+containing files specified by these options.
+
+The information specified by the main option &%tls_verify_certificates%&
+is similarly cached so long as it specifies files explicitly
+or (under GnuTLS) is the string &"system,cache"&.
+The latter case is not automatically invalidated;
+it is the operator's responsibility to arrange for a daemon restart
+any time the system certificate authority bundle is updated.
+A HUP signal is sufficient for this.
+The value &"system"& results in no caching under GnuTLS.
+
+The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
+is acceptable in configurations for the Exim executavble.
+
+Caching of the system Certificate Authorities bundle can
+save siginificant time and processing on every TLS connection
+accepted by Exim.
+
+
 
 
 .section "Configuring an Exim client to use TLS" "SECTclientTLS"
@@ -28567,6 +29701,7 @@ deliveries as well as to incoming, the latter one causing logging of the
 server certificate's DN. The remaining client configuration for TLS is all
 within the &(smtp)& transport.
 
+.cindex "ESMTP extensions" STARTTLS
 It is not necessary to set any options to have TLS work in the &(smtp)&
 transport. If Exim is built with TLS support, and TLS is advertised by a
 server, the &(smtp)& transport always tries to start a TLS session. However,
@@ -28594,7 +29729,10 @@ unencrypted.
 
 The &%tls_certificate%& and &%tls_privatekey%& options of the &(smtp)&
 transport provide the client with a certificate, which is passed to the server
-if it requests it. If the server is Exim, it will request a certificate only if
+if it requests it.
+This is an optional thing for TLS connections, although either end
+may insist on it.
+If the server is Exim, it will request a certificate only if
 &%tls_verify_hosts%& or &%tls_try_verify_hosts%& matches the client.
 
 &*Note*&: Do not use a certificate which has the OCSP-must-staple extension,
@@ -28619,8 +29757,12 @@ certificate verification to the listed servers.  Verification either must
 or need not succeed respectively.
 
 The &%tls_verify_cert_hostnames%& option lists hosts for which additional
-checks are made: that the host name (the one in the DNS A record)
-is valid for the certificate.
+name checks are made on the server certificate.
+The match against this list is, as per other Exim usage, the
+IP for the host.  That is most closely associated with the
+name on the DNS A (or AAAA) record for the host.
+However, the name that needs to be in the certificate
+is the one at the head of any CNAME chain leading to the A record.
 The option defaults to always checking.
 
 The &(smtp)& transport has two OCSP-related options:
@@ -28668,8 +29810,64 @@ outgoing connection.
 
 
 
+.section "Caching of static client configuration items" "SECTclientTLScache"
+.cindex certificate caching
+.cindex privatekey caching
+.cindex crl caching
+.cindex ciphers caching
+.cindex "CA bundle" caching
+.cindex "certificate authorities" caching
+.cindex tls_certificate caching
+.cindex tls_privatekey caching
+.cindex tls_crl caching
+.cindex tls_require_ciphers caching
+.cindex tls_verify_certificate caching
+.cindex caching certificate
+.cindex caching privatekey
+.cindex caching crl
+.cindex caching ciphers
+.cindex caching "certificate authorities
+If any of the transport configuration options &%tls_certificate%&, &%tls_privatekey%&
+and &%tls_crl%& have values with no
+expandable elements,
+then the associated information is loaded per smtp transport
+at daemon startup, at the start of a queue run, or on a
+command-line specified message delivery.
+It is made available
+to child processes forked for handling making SMTP connections.
+
+This caching is currently only supported under Linux.
+
+If caching is not possible, the load
+of the associated information is done at the startup of the TLS connection.
+
+The cache is invalidated in the daemon
+and reloaded after any changes to the directories
+containing files specified by these options.
+
+The information specified by the main option &%tls_verify_certificates%&
+is similarly cached so long as it specifies files explicitly
+or (under GnuTLS) is the string &"system,cache"&.
+The latter case is not automatically invaludated;
+it is the operator's responsibility to arrange for a daemon restart
+any time the system certificate authority bundle is updated.
+A HUP signal is sufficient for this.
+The value &"system"& results in no caching under GnuTLS.
+
+The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
+is acceptable in configurations for the Exim executavble.
+
+Caching of the system Certificate Authorities bundle can
+save siginificant time and processing on every TLS connection
+initiated by Exim.
+
+
+
+
 .section "Use of TLS Server Name Indication" "SECTtlssni"
 .cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI
 .vindex "&$tls_in_sni$&"
 .oindex "&%tls_in_sni%&"
 With TLS1.0 or above, there is an extension mechanism by which extra
@@ -28701,6 +29899,9 @@ nothing more to it.  Choosing a sensible value not derived insecurely is the
 only point of caution.  The &$tls_out_sni$& variable will be set to this string
 for the lifetime of the client connection (including during authentication).
 
+If DANE validated the connection attempt then the value of the &%tls_sni%& option
+is forced to the name of the destination host, after any MX- or CNAME-following.
+
 Except during SMTP client sessions, if &$tls_in_sni$& is set then it is a string
 received from a client.
 It can be logged with the &%log_selector%& item &`+tls_sni`&.
@@ -28741,6 +29942,33 @@ When Exim is built against GnuTLS, SNI support is available as of GnuTLS
 0.5.10.  (Its presence predates the current API which Exim uses, so if Exim
 built, then you have SNI support).
 
+.cindex TLS ALPN
+.cindex ALPN "general information"
+.cindex TLS "Application Layer Protocol Names"
+There is a TLS feature related to SNI
+called Application Layer Protocol Name (ALPN).
+This is intended to declare, or select, what protocol layer will be using a TLS
+connection.
+The client for the connection proposes a set of protocol names, and
+the server responds with a selected one.
+It is not, as of 2021, commonly used for SMTP connections.
+However, to guard against misirected or malicious use of web clients
+(which often do use ALPN) against MTA ports, Exim by default check that
+there is no incompatible ALPN specified by a client for a TLS connection.
+If there is, the connection is rejected.
+
+As a client Exim does not supply ALPN by default.
+The behaviour of both client and server can be configured using the options
+&%tls_alpn%& and &%hosts_require_alpn%&.
+There are no variables providing observability.
+Some feature-specific logging may appear on denied connections, but this
+depends on the behavious of the peer
+(not all peers can send a feature-specific TLS Alert).
+
+This feature is available when Exim is built with
+OpenSSL 1.1.0 or later or GnuTLS 3.2.0 or later;
+the macro _HAVE_TLS_ALPN will be defined when this is so.
+
 
 
 .section "Multiple messages on the same encrypted TCP/IP connection" &&&
@@ -28814,7 +30042,7 @@ Ivan is the author of the popular TLS testing tools at
 
 
 .section "Certificate chains" "SECID186"
-The file named by &%tls_certificate%& may contain more than one
+A file named by &%tls_certificate%& may contain more than one
 certificate. This is useful in the case where the certificate that is being
 sent is validated by an intermediate certificate which the other end does
 not have. Multiple certificates must be in the correct order in the file.
@@ -28887,6 +30115,98 @@ Open-source PKI book, available online at
 .ecindex IIDencsmtp2
 
 
+.section "TLS Resumption" "SECTresumption"
+.cindex TLS resumption
+TLS Session Resumption for TLS 1.2 and TLS 1.3 connections can be used (defined
+in RFC 5077 for 1.2).  The support for this requires GnuTLS 3.6.3 or OpenSSL 1.1.1
+(or later).
+
+Session resumption (this is the "stateless" variant) involves the server sending
+a "session ticket" to the client on one connection, which can be stored by the
+client and used for a later session.  The ticket contains sufficient state for
+the server to reconstruct the TLS session, avoiding some expensive crypto
+calculation and (on TLS1.2) one full packet roundtrip time.
+
+.ilist
+Operational cost/benefit:
+
+ The extra data being transmitted costs a minor amount, and the client has
+ extra costs in storing and retrieving the data.
+
+ In the Exim/Gnutls implementation the extra cost on an initial connection
+ which is TLS1.2 over a loopback path is about 6ms on 2017-laptop class hardware.
+ The saved cost on a subsequent connection is about 4ms; three or more
+ connections become a net win.  On longer network paths, two or more
+ connections will have an average lower startup time thanks to the one
+ saved packet roundtrip.  TLS1.3 will save the crypto cpu costs but not any
+ packet roundtrips.
+
+.cindex "hints database" tls
+ Since a new hints DB is used on the TLS client,
+ the hints DB maintenance should be updated to additionally handle "tls".
+
+.next
+Security aspects:
+
+ The session ticket is encrypted, but is obviously an additional security
+ vulnarability surface.  An attacker able to decrypt it would have access
+ all connections using the resumed session.
+ The session ticket encryption key is not committed to storage by the server
+ and is rotated regularly (OpenSSL: 1hr, and one previous key is used for
+ overlap; GnuTLS 6hr but does not specify any overlap).
+ Tickets have limited lifetime (2hr, and new ones issued after 1hr under
+ OpenSSL.  GnuTLS 2hr, appears to not do overlap).
+
+ There is a question-mark over the security of the Diffie-Helman parameters
+ used for session negotiation.
+
+.next
+Observability:
+
+ The &%log_selector%& "tls_resumption" appends an asterisk to the tls_cipher "X="
+ element.
+
+ The variables &$tls_in_resumption$& and &$tls_out_resumption$&
+ have bits 0-4 indicating respectively
+ support built, client requested ticket, client offered session,
+ server issued ticket, resume used.  A suitable decode list is provided
+ in the builtin macro _RESUME_DECODE for in &%listextract%& expansions.
+
+.next
+Control:
+
+The &%tls_resumption_hosts%& main option specifies a hostlist for which
+exim, operating as a server, will offer resumption to clients.
+Current best practice is to not offer the feature to MUA connection.
+Commonly this can be done like this:
+.code
+tls_resumption_hosts = ${if inlist {$received_port}{587:465} {:}{*}}
+.endd
+If the peer host matches the list after expansion then resumption
+is offered and/or accepted.
+
+The &%tls_resumption_hosts%& smtp transport option performs the
+equivalent function for operation as a client.
+If the peer host matches the list after expansion then resumption
+is attempted (if a stored session is available) or the information
+stored (if supplied by the peer).
+
+
+.next
+Issues:
+
+ In a resumed session:
+.ilist
+  The variables &$tls_{in,out}_cipher$& will have values different
+ to the original (under GnuTLS).
+.next
+  The variables &$tls_{in,out}_ocsp$& will be "not requested" or "no response",
+ and the &%hosts_require_ocsp%& smtp trasnport option will fail.
+. XXX need to do something with that hosts_require_ocsp
+.endlist
+
+.endlist
+
 
 .section DANE "SECDANE"
 .cindex DANE
@@ -28904,7 +30224,7 @@ by (a) is thought to be smaller than that of the set of root CAs.
 It also allows the server to declare (implicitly) that connections to it should use TLS.  An MITM could simply
 fail to pass on a server's STARTTLS.
 
-DANE scales better than having to maintain (and side-channel communicate) copies of server certificates
+DANE scales better than having to maintain (and communicate via side-channel) copies of server certificates
 for every possible target server.  It also scales (slightly) better than having to maintain on an SMTP
 client a copy of the standard CAs bundle.  It also means not having to pay a CA for certificates.
 
@@ -29028,7 +30348,7 @@ the &%dnssec_request_domains%& router or transport option.
 
 DANE will only be usable if the target host has DNSSEC-secured MX, A and TLSA records.
 
-A TLSA lookup will be done if either of the above options match and the host-lookup succeeded using dnssec.
+A TLSA lookup will be done if either of the above options match and the host-lookup succeeded using DNSSEC.
 If a TLSA lookup is done and succeeds, a DANE-verified TLS connection
 will be required for the host.  If it does not, the host will not
 be used; there is no fallback to non-DANE or non-TLS.
@@ -29049,6 +30369,7 @@ If DANE is requested and useable (see above) the following transport options are
   tls_verify_certificates
   tls_crl
   tls_verify_cert_hostnames
+  tls_sni
 .endd
 
 If DANE is not usable, whether requested or not, and CA-anchored
@@ -29234,6 +30555,9 @@ accepted by an &%accept%& verb that has a &%message%& modifier, the contents of
 the message override the banner message that is otherwise specified by the
 &%smtp_banner%& option.
 
+For tls-on-connect connections, the ACL is run after the TLS connection
+is accepted (however, &%host_reject_connection%& is tested before).
+
 
 .section "The EHLO/HELO ACL" "SECID192"
 .cindex "EHLO" "ACL for"
@@ -29705,8 +31029,8 @@ The &%message%& modifier operates exactly as it does for &%accept%&.
 &%drop%&: This verb behaves like &%deny%&, except that an SMTP connection is
 forcibly closed after the 5&'xx'& error message has been sent. For example:
 .code
-drop   message   = I don't take more than 20 RCPTs
-       condition = ${if > {$rcpt_count}{20}}
+drop   condition = ${if > {$rcpt_count}{20}}
+       message   = I don't take more than 20 RCPTs
 .endd
 There is no difference between &%deny%& and &%drop%& for the connect-time ACL.
 The connection is always dropped after sending a 550 response.
@@ -29935,7 +31259,7 @@ in several different ways. For example:
 It can be at the end of an &%accept%& statement:
 .code
     accept  ...some conditions
-            control = queue_only
+            control = queue
 .endd
 In this case, the control is applied when this statement yields &"accept"&, in
 other words, when the conditions are all true.
@@ -29944,7 +31268,7 @@ other words, when the conditions are all true.
 It can be in the middle of an &%accept%& statement:
 .code
     accept  ...some conditions...
-            control = queue_only
+            control = queue
             ...some more conditions...
 .endd
 If the first set of conditions are true, the control is applied, even if the
@@ -30162,8 +31486,9 @@ anyway. If the message contains newlines, this gives rise to a multi-line SMTP
 response.
 
 .vindex "&$acl_verify_message$&"
-For ACLs that are called by an &%acl =%& ACL condition, the message is
-stored in &$acl_verify_message$&, from which the calling ACL may use it.
+While the text is being expanded, the &$acl_verify_message$& variable
+contains any message previously set.
+Afterwards, &$acl_verify_message$& is cleared.
 
 If &%message%& is used on a statement that verifies an address, the message
 specified overrides any message that is generated by the verification process.
@@ -30350,12 +31675,43 @@ sender when the destination system is doing content-scan based rejection.
 This control turns on debug logging, almost as though Exim had been invoked
 with &`-d`&, with the output going to a new logfile in the usual logs directory,
 by default called &'debuglog'&.
-The filename can be adjusted with the &'tag'& option, which
-may access any variables already defined.  The logging may be adjusted with
-the &'opts'& option, which takes the same values as the &`-d`& command-line
-option.
-Logging started this way may be stopped, and the file removed,
-with the &'kill'& option.
+
+Logging set up by the control will be maintained across spool residency.
+
+Options are a slash-separated list.
+If an option takes an argument, the option name and argument are separated by
+an equals character.
+Several options are supported:
+.display
+tag=<&'suffix'&>         The filename can be adjusted with thise option.
+		     The argument, which may access any variables already defined,
+                     is appended to the default name.
+
+opts=<&'debug&~options'&> The argument specififes what is to be logged,
+                     using the same values as the &`-d`& command-line option.
+
+stop                 Logging started with this control may be
+                     stopped by using this option.
+
+kill                 Logging started with this control may be
+                     stopped by using this option.
+                     Additionally the debug file will be removed,
+                     providing one means for speculative debug tracing.
+
+pretrigger=<&'size'&>    This option specifies a memory buffuer to be used
+                     for pre-trigger debug capture.
+                     Debug lines are recorded in the buffer until
+                     and if) a trigger occurs; at which time they are
+                     dumped to the debug file.  Newer lines displace the
+                     oldest if the buffer is full.  After a trigger,
+                     immediate writes to file are done as normal.
+
+trigger=<&'reason'&>     This option selects cause for the pretrigger buffer
+                     see above) to be copied to file.  A reason of $*now*
+                     take effect immediately; one of &*paniclog*& triggers
+                     on a write to the panic log.
+.endd
+
 Some examples (which depend on variables that don't exist in all
 contexts):
 .code
@@ -30364,6 +31720,8 @@ contexts):
       control = debug/opts=+expand+acl
       control = debug/tag=.$message_exim_id/opts=+expand
       control = debug/kill
+      control = debug/opts=+all/pretrigger=1024/trigger=paniclog
+      control = debug/trigger=now
 .endd
 
 
@@ -30509,22 +31867,37 @@ calling host. Its effect lasts until the end of the SMTP connection.
 
 .vitem &*control&~=&~no_pipelining*&
 .cindex "PIPELINING" "suppressing advertising"
+.cindex "ESMTP extensions" PIPELINING
 This control turns off the advertising of the PIPELINING extension to SMTP in
 the current session. To be useful, it must be obeyed before Exim sends its
 response to an EHLO command. Therefore, it should normally appear in an ACL
 controlled by &%acl_smtp_connect%& or &%acl_smtp_helo%&. See also
 &%pipelining_advertise_hosts%&.
 
-.vitem &*control&~=&~queue_only*&
+.vitem &*control&~=&~queue/*&<&'options'&>* &&&
+       &*control&~=&~queue_only*&
+.oindex "&%queue%&"
 .oindex "&%queue_only%&"
 .cindex "queueing incoming messages"
+.cindex queueing "forcing in ACL"
+.cindex "first pass routing"
 This control is permitted only for the MAIL, RCPT, DATA, and non-SMTP ACLs, in
 other words, only when a message is being received. If the message is accepted,
 it is placed on Exim's queue and left there for delivery by a subsequent queue
-runner. No immediate delivery process is started. In other words, it has the
-effect as the &%queue_only%& global option. However, the control applies only
-to the current message, not to any subsequent ones that may be received in the
-same SMTP connection.
+runner.
+If used with no options set,
+no immediate delivery process is started. In other words, it has the
+effect as the &%queue_only%& global option or &'-odq'& command-line option.
+
+If the &'first_pass_route'& option is given then
+the behaviour is like the command-line &'-oqds'& option;
+a delivery process is started which stops short of making
+any SMTP delivery.  The benefit is that the hints database will be updated for
+the message being waiting for a specific host, and a later queue run will be
+able to send all such messages on a single connection.
+
+The control only applies to the current message, not to any subsequent ones that
+ may be received in the same SMTP connection.
 
 .vitem &*control&~=&~submission/*&<&'options'&>
 .cindex "message" "submission"
@@ -30568,7 +31941,7 @@ data is read.
 that are being submitted at the same time using &%-bs%& or &%-bS%&.
 
 .vitem &*control&~=&~utf8_downconvert*&
-This control enables conversion of UTF-8 in message addresses
+This control enables conversion of UTF-8 in message envelope addresses
 to a-label form.
 For details see section &<<SECTi18nMTA>>&.
 .endlist vlist
@@ -30925,7 +32298,7 @@ of the lookup is made available in the &$host_data$& variable. This
 allows you, for example, to set up a statement like this:
 .code
 deny  hosts = net-lsearch;/some/file
-message = $host_data
+      message = $host_data
 .endd
 which gives a custom error message for each denied host.
 
@@ -30979,6 +32352,12 @@ content-scanning extension, and is available only in the DATA, MIME, and
 non-SMTP ACLs. It causes the incoming message to be scanned for a match with
 any of the regular expressions. For details, see chapter &<<CHAPexiscan>>&.
 
+.vitem &*seen&~=&~*&<&'parameters'&>
+.cindex "&%sseen%& ACL condition"
+This condition can be used to test if a situation has been previously met,
+for example for greylisting.
+Details are given in section &<<SECTseen>>&.
+
 .vitem &*sender_domains&~=&~*&<&'domain&~list'&>
 .cindex "&%sender_domains%& ACL condition"
 .cindex "sender" "ACL checking"
@@ -31038,8 +32417,9 @@ send email. Details of how this works are given in section
 .cindex "header lines" "verifying header names only ASCII"
 .cindex "verifying" "header names only ASCII"
 This condition is relevant only in an ACL that is run after a message has been
-received, that is, in an ACL specified by &%acl_smtp_data%& or
-&%acl_not_smtp%&.  It checks all header names (not the content) to make sure
+received.
+This usually means an ACL specified by &%acl_smtp_data%& or &%acl_not_smtp%&.
+It checks all header names (not the content) to make sure
 there are no non-ASCII characters, also excluding control characters.  The
 allowable characters are decimal ASCII values 33 through 126.
 
@@ -31069,8 +32449,8 @@ section &<<SECTaddressverification>>& (callouts are described in section
 condition to restrict it to bounce messages only:
 .code
 deny    senders = :
-        message = A valid sender header is required for bounces
        !verify  = header_sender
+        message = A valid sender header is required for bounces
 .endd
 
 .vitem &*verify&~=&~header_syntax*&
@@ -31194,7 +32574,7 @@ Note that '/' is legal in local-parts; if the address may have such
 (eg. is generated from the received message)
 they must be protected from the options parsing by doubling:
 .code
-verify = sender=${sg{${address:$h_sender:}}{/}{//}}
+verify = sender=${listquote{/}{${address:$h_sender:}}}
 .endd
 .endlist
 
@@ -31236,11 +32616,11 @@ This is usually the required action when &%dnslists%& is used with &%deny%&
 (which is the most common usage), because it prevents a DNS failure from
 blocking mail. However, you can change this behaviour by putting one of the
 following special items in the list:
-.display
-&`+include_unknown `&   behave as if the item is on the list
-&`+exclude_unknown `&   behave as if the item is not on the list (default)
-&`+defer_unknown   `&   give a temporary error
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow "+include_unknown"   "behave as if the item is on the list"
+.irow "+exclude_unknown"   "behave as if the item is not on the list (default)"
+.irow "+defer_unknown  "   "give a temporary error"
+.endtable
 .cindex "&`+include_unknown`&"
 .cindex "&`+exclude_unknown`&"
 .cindex "&`+defer_unknown`&"
@@ -31252,8 +32632,8 @@ Testing the list of domains stops as soon as a match is found. If you want to
 warn for one list and block for another, you can use two different statements:
 .code
 deny  dnslists = blackholes.mail-abuse.org
-warn  message  = X-Warn: sending host is on dialups list
-      dnslists = dialups.mail-abuse.org
+warn  dnslists = dialups.mail-abuse.org
+      message  = X-Warn: sending host is on dialups list
 .endd
 .cindex caching "of dns lookup"
 .cindex DNS TTL
@@ -31294,8 +32674,8 @@ addresses (see, e.g., the &'domain based zones'& link at
 with these lists. You can change the name that is looked up in a DNS list by
 listing it after the domain name, introduced by a slash. For example,
 .code
-deny  message  = Sender's domain is listed at $dnslist_domain
-      dnslists = dsn.rfc-ignorant.org/$sender_address_domain
+deny  dnslists = dsn.rfc-ignorant.org/$sender_address_domain
+      message  = Sender's domain is listed at $dnslist_domain
 .endd
 This particular example is useful only in ACLs that are obeyed after the
 RCPT or DATA commands, when a sender address is available. If (for
@@ -31359,13 +32739,13 @@ dnslists = black.list.tld/a.domain::b.domain
 However, when the data for the list is obtained from a lookup, the second form
 is usually much more convenient. Consider this example:
 .code
-deny message  = The mail servers for the domain \
+deny dnslists = sbl.spamhaus.org/<|${lookup dnsdb {>|a=<|\
+                                   ${lookup dnsdb {>|mxh=\
+                                   $sender_address_domain} }} }
+     message  = The mail servers for the domain \
                 $sender_address_domain \
                 are listed at $dnslist_domain ($dnslist_value); \
                 see $dnslist_text.
-     dnslists = sbl.spamhaus.org/<|${lookup dnsdb {>|a=<|\
-                                   ${lookup dnsdb {>|mxh=\
-                                   $sender_address_domain} }} }
 .endd
 Note the use of &`>|`& in the dnsdb lookup to specify the separator for
 multiple DNS records. The inner dnsdb lookup produces a list of MX hosts
@@ -31389,19 +32769,24 @@ DNS lists are constructed using address records in the DNS. The original RBL
 just used the address 127.0.0.1 on the right hand side of each record, but the
 RBL+ list and some other lists use a number of values with different meanings.
 The values used on the RBL+ list are:
-.display
-127.1.0.1  RBL
-127.1.0.2  DUL
-127.1.0.3  DUL and RBL
-127.1.0.4  RSS
-127.1.0.5  RSS and RBL
-127.1.0.6  RSS and DUL
-127.1.0.7  RSS and DUL and RBL
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow 127.1.0.1  "RBL"
+.irow 127.1.0.2  "DUL"
+.irow 127.1.0.3  "DUL and RBL"
+.irow 127.1.0.4  "RSS"
+.irow 127.1.0.5  "RSS and RBL"
+.irow 127.1.0.6  "RSS and DUL"
+.irow 127.1.0.7  "RSS and DUL and RBL"
+.endtable
 Section &<<SECTaddmatcon>>& below describes how you can distinguish between
 different values. Some DNS lists may return more than one address record;
 see section &<<SECThanmuldnsrec>>& for details of how they are checked.
 
+Values returned by a properly running DBSBL should be in the 127.0.0.0/8
+range. If a DNSBL operator loses control of the domain, lookups on it
+may start returning other addresses.  Because of this, Exim now ignores
+returned values outside the 127/8 region.
+
 
 .section "Variables set from DNS lists" "SECID204"
 .cindex "expansion" "variables, set from DNS list"
@@ -31438,7 +32823,7 @@ very meaningful. See section &<<SECTmordetinf>>& for a way of obtaining more
 information.
 
 You can use the DNS list variables in &%message%& or &%log_message%& modifiers
-&-- although these appear before the condition in the ACL, they are not
+&-- even if these appear before the condition in the ACL, they are not
 expanded until after it has failed. For example:
 .code
 deny    hosts = !+local_networks
@@ -31538,6 +32923,14 @@ deny  dnslists = relays.ordb.org
 .endd
 which is less clear, and harder to maintain.
 
+Negation can also be used with a bitwise-and restriction.
+The dnslists condition with only be trus if a result is returned
+by the lookup which, anded with the restriction, is all zeroes.
+For example:
+.code
+deny dnslists = zen.spamhaus.org!&0.255.255.0
+.endd
+
 
 
 
@@ -31624,12 +33017,12 @@ restrictions, to get the TXT record. As a byproduct of this, there is also
 a check that the IP being tested is indeed on the first list. The first
 domain is the one that is put in &$dnslist_domain$&. For example:
 .code
-deny message  = \
-         rejected because $sender_host_address is blacklisted \
-         at $dnslist_domain\n$dnslist_text
-       dnslists = \
+deny   dnslists = \
          sbl.spamhaus.org,sbl-xbl.spamhaus.org=127.0.0.2 : \
          dul.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.10
+       message  = \
+         rejected because $sender_host_address is blacklisted \
+         at $dnslist_domain\n$dnslist_text
 .endd
 For the first blacklist item, this starts by doing a lookup in
 &'sbl-xbl.spamhaus.org'& and testing for a 127.0.0.2 return. If there is a
@@ -31687,6 +33080,61 @@ address you should specify alternate list separators for both the outer
        dnslists = <; dnsbl.example.com/<|$acl_m_addrslist
 .endd
 
+
+.section "Previously seen user and hosts" "SECTseen"
+.cindex "&%sseen%& ACL condition"
+.cindex greylisting
+The &%seen%& ACL condition can be used to test whether a
+situation has been previously met.
+It uses a hints database to record a timestamp against a key.
+host. The syntax of the condition is:
+.display
+&`seen =`& <&'optional flag'&><&'time interval'&> &`/`& <&'options'&>
+.endd
+
+For example,
+.code
+defer	seen = -5m / key=${sender_host_address}_$local_part@$domain
+.endd
+in a RCPT ACL will implement simple greylisting.
+
+The parameters for the condition are
+a possible minus sign,
+then an interval,
+then, slash-separated, a list of options.
+The interval is taken as an offset before the current time,
+and used for the test.
+If the interval is preceded by a minus sign then the condition returns
+whether a record is found which is before the test time.
+Otherwise, the condition returns whether one is found which is since the
+test time.
+
+Options are read in order with later ones overriding earlier ones.
+
+The default key is &$sender_host_address$&.
+An explicit key can be set using a &%key=value%& option.
+
+If a &%readonly%& option is given then
+no record create or update is done.
+If a &%write%& option is given then
+a record create or update is always done.
+An update is done if the test is for &"since"&.
+If none of those hold and there was no existing record,
+a record is created.
+
+Creates and updates are marked with the current time.
+
+Finally, a &"before"& test which succeeds, and for which the record
+is old enough, will be refreshed with a timestamp of the test time.
+This can prevent tidying of the database from removing the entry.
+The interval for this is, by default, 10 days.
+An explicit interval can be set using a
+&%refresh=value%& option.
+
+Note that &"seen"& should be added to the list of hints databases
+for maintenance if this ACL condition is used.
+
+
 .section "Rate limiting incoming messages" "SECTratelimiting"
 .cindex "rate limiting" "client sending"
 .cindex "limiting client sending rates"
@@ -31776,7 +33224,7 @@ in kilobytes, megabytes, or gigabytes, respectively.
 
 The &%per_rcpt%& option causes Exim to limit the rate at which recipients are
 accepted. It can be used in the &%acl_smtp_rcpt%&, &%acl_smtp_predata%&,
-&%acl_smtp_mime%&, &%acl_smtp_data%&, or &%acl_smtp_rcpt%& ACLs. In
+&%acl_smtp_mime%&, or &%acl_smtp_data%& ACLs. In
 &%acl_smtp_rcpt%& the rate is updated one recipient at a time; in the other
 ACLs the rate is updated with the total (accepted) recipient count in one go. Note that
 in either case the rate limiting engine will see a message with many
@@ -31819,12 +33267,12 @@ new rate.
 .code
 acl_check_connect:
  deny ratelimit = 100 / 5m / readonly
-    log_message = RATE CHECK: $sender_rate/$sender_rate_period \
+      log_message = RATE CHECK: $sender_rate/$sender_rate_period \
                   (max $sender_rate_limit)
 # ...
 acl_check_mail:
  warn ratelimit = 100 / 5m / strict
-    log_message = RATE UPDATE: $sender_rate/$sender_rate_period \
+      log_message = RATE UPDATE: $sender_rate/$sender_rate_period \
                   (max $sender_rate_limit)
 .endd
 
@@ -31934,16 +33382,16 @@ deny authenticated = *
      ratelimit = 100 / 1d / strict / $authenticated_id
 
 # System-wide rate limit
-defer message = Sorry, too busy. Try again later.
-     ratelimit = 10 / 1s / $primary_hostname
+defer ratelimit = 10 / 1s / $primary_hostname
+      message = Sorry, too busy. Try again later.
 
 # Restrict incoming rate from each host, with a default
 # set using a macro and special cases looked up in a table.
-defer message = Sender rate exceeds $sender_rate_limit \
-               messages per $sender_rate_period
-     ratelimit = ${lookup {$sender_host_address} \
+defer ratelimit = ${lookup {$sender_host_address} \
                    cdb {DB/ratelimits.cdb} \
                    {$value} {RATELIMIT} }
+      message = Sender rate exceeds $sender_rate_limit \
+               messages per $sender_rate_period
 .endd
 &*Warning*&: If you have a busy server with a lot of &%ratelimit%& tests,
 especially with the &%per_rcpt%& option, you may suffer from a performance
@@ -31992,6 +33440,13 @@ The &%success_on_redirect%& option causes verification always to succeed
 immediately after a successful redirection. By default, if a redirection
 generates just one address, that address is also verified. See further
 discussion in section &<<SECTredirwhilveri>>&.
+.next
+If the &%quota%& option is specified for recipient verify,
+successful routing to an appendfile transport is followed by a call into
+the transport to evaluate the quota status for the recipient.
+No actual delivery is done, but verification will succeed if the quota
+is sufficient for the message (if the sender gave a message size) or
+not already exceeded (otherwise).
 .endlist
 
 .cindex "verifying address" "differentiating failures"
@@ -32008,6 +33463,7 @@ warn  !verify = sender
 If you are writing your own custom rejection message or log message when
 denying access, you can use this variable to include information about the
 verification failure.
+This variable is cleared at the end of processing the ACL verb.
 
 In addition, &$sender_verify_failure$& or &$recipient_verify_failure$& (as
 appropriate) contains one of the following words:
@@ -32025,6 +33481,8 @@ connection, HELO, or MAIL).
 &%recipient%&: The RCPT command in a callout was rejected.
 .next
 &%postmaster%&: The postmaster check in a callout was rejected.
+.next
+&%quota%&: The quota check for a local recipient did non pass.
 .endlist
 
 The main use of these variables is expected to be to distinguish between
@@ -32119,6 +33577,13 @@ output before performing a callout in an ACL, to avoid unexpected timeouts in
 clients when the SMTP PIPELINING extension is in use. The flushing can be
 disabled by using a &%control%& modifier to set &%no_callout_flush%&.
 
+.cindex "tainted data" "de-tainting"
+.cindex "de-tainting" "using receipient verify"
+A recipient callout which gets a 2&'xx'& code
+will assign untainted values to the
+&$domain_data$& and &$local_part_data$& variables,
+corresponding to the domain and local parts of the recipient address.
+
 
 
 
@@ -32354,6 +33819,36 @@ behaviour will be the same.
 
 
 
+.section "Quota caching" "SECTquotacache"
+.cindex "hints database" "quota cache"
+.cindex "quota" "cache, description of"
+.cindex "caching" "quota"
+Exim caches the results of quota verification
+in order to reduce the amount of resources used.
+The &"callout"& hints database is used.
+
+The default cache periods are five minutes for a positive (good) result
+and one hour for a negative result.
+To change the periods the &%quota%& option can be followed by an equals sign
+and a number of optional paramemters, separated by commas.
+For example:
+.code
+verify = recipient/quota=cachepos=1h,cacheneg=1d
+.endd
+Possible parameters are:
+.vlist
+.vitem &*cachepos&~=&~*&<&'time&~interval'&>
+.cindex "quota cache" "positive entry expiry, specifying"
+Set the lifetime for a positive cache entry.
+A value of zero seconds is legitimate.
+
+.vitem &*cacheneg&~=&~*&<&'time&~interval'&>
+.cindex "quota cache" "negative entry expiry, specifying"
+As above, for a negative entry.
+
+.vitem &*no_cache*&
+Set both positive and negative lifetimes to zero.
+
 .section "Sender address verification reporting" "SECTsenaddver"
 .cindex "verifying" "suppressing error details"
 See section &<<SECTaddressverification>>& for a general discussion of
@@ -32532,16 +34027,16 @@ list called &%batv_senders%&. Then, in the ACL for RCPT commands, you could
 use this:
 .code
 # Bounces: drop unsigned addresses for BATV senders
-deny message = This address does not send an unsigned reverse path
-     senders = :
+deny senders = :
      recipients = +batv_senders
+     message = This address does not send an unsigned reverse path
 
 # Bounces: In case of prvs-signed address, check signature.
-deny message = Invalid reverse path signature.
-     senders = :
+deny senders = :
      condition  = ${prvscheck {$local_part@$domain}\
                   {PRVSCHECK_SQL}{1}}
      !condition = $prvscheck_result
+     message = Invalid reverse path signature.
 .endd
 The first statement rejects recipients for bounce messages that are addressed
 to plain BATV sender addresses, because it is known that BATV senders do not
@@ -33078,13 +34573,13 @@ imposed by your anti-virus scanner.
 
 Here is a very simple scanning example:
 .code
-deny message = This message contains malware ($malware_name)
-     malware = *
+deny malware = *
+     message = This message contains malware ($malware_name)
 .endd
 The next example accepts messages when there is a problem with the scanner:
 .code
-deny message = This message contains malware ($malware_name)
-     malware = */defer_ok
+deny malware = */defer_ok
+     message = This message contains malware ($malware_name)
 .endd
 The next example shows how to use an ACL variable to scan with both sophie and
 aveserver. It assumes you have set:
@@ -33093,13 +34588,13 @@ av_scanner = $acl_m0
 .endd
 in the main Exim configuration.
 .code
-deny message = This message contains malware ($malware_name)
-     set acl_m0 = sophie
+deny set acl_m0 = sophie
      malware = *
+     message = This message contains malware ($malware_name)
 
-deny message = This message contains malware ($malware_name)
-     set acl_m0 = aveserver
+deny set acl_m0 = aveserver
      malware = *
+     message = This message contains malware ($malware_name)
 .endd
 
 
@@ -33228,8 +34723,8 @@ is set to record the actual address used.
 .section "Calling SpamAssassin from an Exim ACL" "SECID206"
 Here is a simple example of the use of the &%spam%& condition in a DATA ACL:
 .code
-deny message = This message was classified as SPAM
-     spam = joe
+deny spam = joe
+     message = This message was classified as SPAM
 .endd
 The right-hand side of the &%spam%& condition specifies a name. This is
 relevant if you have set up multiple SpamAssassin profiles. If you do not want
@@ -33261,9 +34756,9 @@ large ones may cause significant performance degradation. As most spam messages
 are quite small, it is recommended that you do not scan the big ones. For
 example:
 .code
-deny message = This message was classified as SPAM
-     condition = ${if < {$message_size}{10K}}
+deny condition = ${if < {$message_size}{10K}}
      spam = nobody
+     message = This message was classified as SPAM
 .endd
 
 The &%spam%& condition returns true if the threshold specified in the user's
@@ -33321,8 +34816,8 @@ failed. If you want to treat DEFER as FAIL (to pass on to the next ACL
 statement block), append &`/defer_ok`& to the right-hand side of the
 spam condition, like this:
 .code
-deny message = This message was classified as SPAM
-     spam    = joe/defer_ok
+deny spam    = joe/defer_ok
+     message = This message was classified as SPAM
 .endd
 This causes messages to be accepted even if there is a problem with &%spamd%&.
 
@@ -33340,9 +34835,9 @@ warn  spam = nobody
       add_header = Subject: *SPAM* $h_Subject:
 
 # reject spam at high scores (> 12)
-deny  message = This message scored $spam_score spam points.
-      spam = nobody:true
+deny  spam = nobody:true
       condition = ${if >{$spam_score_int}{120}{1}{0}}
+      message = This message scored $spam_score spam points.
 .endd
 
 
@@ -33426,13 +34921,22 @@ The following list describes all expansion variables that are
 available in the MIME ACL:
 
 .vlist
+.vitem &$mime_anomaly_level$& &&&
+       &$mime_anomaly_text$&
+.vindex &$mime_anomaly_level$&
+.vindex &$mime_anomaly_text$&
+If there are problems decoding, these variables contain information on
+the detected issue.
+
 .vitem &$mime_boundary$&
-If the current part is a multipart (see &$mime_is_multipart$&) below, it should
+.vindex &$mime_boundary$&
+If the current part is a multipart (see &$mime_is_multipart$& below), it should
 have a boundary string, which is stored in this variable. If the current part
 has no boundary parameter in the &'Content-Type:'& header, this variable
 contains the empty string.
 
 .vitem &$mime_charset$&
+.vindex &$mime_charset$&
 This variable contains the character set identifier, if one was found in the
 &'Content-Type:'& header. Examples for charset identifiers are:
 .code
@@ -33444,31 +34948,37 @@ Please note that this value is not normalized, so you should do matches
 case-insensitively.
 
 .vitem &$mime_content_description$&
+.vindex &$mime_content_description$&
 This variable contains the normalized content of the &'Content-Description:'&
 header. It can contain a human-readable description of the parts content. Some
 implementations repeat the filename for attachments here, but they are usually
 only used for display purposes.
 
 .vitem &$mime_content_disposition$&
+.vindex &$mime_content_disposition$&
 This variable contains the normalized content of the &'Content-Disposition:'&
 header. You can expect strings like &"attachment"& or &"inline"& here.
 
 .vitem &$mime_content_id$&
+.vindex &$mime_content_id$&
 This variable contains the normalized content of the &'Content-ID:'& header.
 This is a unique ID that can be used to reference a part from another part.
 
 .vitem &$mime_content_size$&
+.vindex &$mime_content_size$&
 This variable is set only after the &%decode%& modifier (see above) has been
 successfully run. It contains the size of the decoded part in kilobytes. The
 size is always rounded up to full kilobytes, so only a completely empty part
 has a &$mime_content_size$& of zero.
 
 .vitem &$mime_content_transfer_encoding$&
+.vindex &$mime_content_transfer_encoding$&
 This variable contains the normalized content of the
 &'Content-transfer-encoding:'& header. This is a symbolic name for an encoding
 type. Typical values are &"base64"& and &"quoted-printable"&.
 
 .vitem &$mime_content_type$&
+.vindex &$mime_content_type$&
 If the MIME part has a &'Content-Type:'& header, this variable contains its
 value, lowercased, and without any options (like &"name"& or &"charset"&). Here
 are some examples of popular MIME types, as they may appear in this variable:
@@ -33483,6 +34993,7 @@ If the MIME part has no &'Content-Type:'& header, this variable contains the
 empty string.
 
 .vitem &$mime_decoded_filename$&
+.vindex &$mime_decoded_filename$&
 This variable is set only after the &%decode%& modifier (see above) has been
 successfully run. It contains the full path and filename of the file
 containing the decoded data.
@@ -33491,6 +35002,7 @@ containing the decoded data.
 .cindex "RFC 2047"
 .vlist
 .vitem &$mime_filename$&
+.vindex &$mime_filename$&
 This is perhaps the most important of the MIME variables. It contains a
 proposed filename for an attachment, if one was found in either the
 &'Content-Type:'& or &'Content-Disposition:'& headers. The filename will be
@@ -33501,6 +35013,7 @@ decoded, but no additional sanity checks are done.
 found, this variable contains the empty string.
 
 .vitem &$mime_is_coverletter$&
+.vindex &$mime_is_coverletter$&
 This variable attempts to differentiate the &"cover letter"& of an e-mail from
 attached data. It can be used to clamp down on flashy or unnecessarily encoded
 content in the cover letter, while not restricting attachments at all.
@@ -33528,23 +35041,27 @@ As an example, the following will ban &"HTML mail"& (including that sent with
 alternative plain text), while allowing HTML files to be attached. HTML
 coverletter mail attached to non-HTML coverletter mail will also be allowed:
 .code
-deny message = HTML mail is not accepted here
-!condition = $mime_is_rfc822
-condition = $mime_is_coverletter
-condition = ${if eq{$mime_content_type}{text/html}{1}{0}}
+deny !condition = $mime_is_rfc822
+     condition = $mime_is_coverletter
+     condition = ${if eq{$mime_content_type}{text/html}{1}{0}}
+     message = HTML mail is not accepted here
 .endd
+
 .vitem &$mime_is_multipart$&
+.vindex &$mime_is_multipart$&
 This variable has the value 1 (true) when the current part has the main type
 &"multipart"&, for example, &"multipart/alternative"& or &"multipart/mixed"&.
 Since multipart entities only serve as containers for other parts, you may not
 want to carry out specific actions on them.
 
 .vitem &$mime_is_rfc822$&
+.vindex &$mime_is_rfc822$&
 This variable has the value 1 (true) if the current part is not a part of the
 checked message itself, but part of an attached message. Attached message
 decoding is fully recursive.
 
 .vitem &$mime_part_count$&
+.vindex &$mime_part_count$&
 This variable is a counter that is raised for each processed MIME part. It
 starts at zero for the very first part (which is usually a multipart). The
 counter is per-message, so it is reset when processing RFC822 attachments (see
@@ -33580,8 +35097,8 @@ expanded before being used, you must also escape dollar signs and backslashes
 with more backslashes, or use the &`\N`& facility to disable expansion.
 Here is a simple example that contains two regular expressions:
 .code
-deny message = contains blacklisted regex ($regex_match_string)
-     regex = [Mm]ortgage : URGENT BUSINESS PROPOSAL
+deny regex = [Mm]ortgage : URGENT BUSINESS PROPOSAL
+     message = contains blacklisted regex ($regex_match_string)
 .endd
 The conditions returns true if any one of the regular expressions matches. The
 &$regex_match_string$& expansion variable is then set up and contains the
@@ -33648,7 +35165,10 @@ directory, so you might set
 HAVE_LOCAL_SCAN=yes
 LOCAL_SCAN_SOURCE=Local/local_scan.c
 .endd
-for example. The function must be called &[local_scan()]&. It is called by
+for example. The function must be called &[local_scan()]&;
+the source file(s) for it should first #define LOCAL_SCAN
+and then #include "local_scan.h".
+It is called by
 Exim after it has received a message, when the success return code is about to
 be sent. This is after all the ACLs have been run. The return code from your
 function controls whether the message is actually accepted or not. There is a
@@ -33670,13 +35190,14 @@ in &_Local/Makefile_& (see section &<<SECTconoptloc>>& below).
 .cindex &%dlfunc%& "API description"
 You must include this line near the start of your code:
 .code
+#define LOCAL_SCAN
 #include "local_scan.h"
 .endd
 This header file defines a number of variables and other values, and the
 prototype for the function itself. Exim is coded to use unsigned char values
 almost exclusively, and one of the things this header defines is a shorthand
 for &`unsigned char`& called &`uschar`&.
-It also contains the following macro definitions, to simplify casting character
+It also makes available the following macro definitions, to simplify casting character
 strings and pointers to character strings:
 .code
 #define CS   (char *)
@@ -33850,11 +35371,11 @@ C variables are as follows:
 .vlist
 .vitem &*int&~body_linecount*&
 This variable contains the number of lines in the message's body.
-It is not valid if the &%spool_files_wireformat%& option is used.
+It is not valid if the &%spool_wireformat%& option is used.
 
 .vitem &*int&~body_zerocount*&
 This variable contains the number of binary zero bytes in the message's body.
-It is not valid if the &%spool_files_wireformat%& option is used.
+It is not valid if the &%spool_wireformat%& option is used.
 
 .vitem &*unsigned&~int&~debug_selector*&
 This variable is set to zero when no debugging is taking place. Otherwise, it
@@ -33889,7 +35410,7 @@ discussed below.
 .vitem &*header_line&~*header_last*&
 A pointer to the last of the header lines.
 
-.vitem &*uschar&~*headers_charset*&
+.vitem &*const&~uschar&~*headers_charset*&
 The value of the &%headers_charset%& configuration option.
 
 .vitem &*BOOL&~host_checking*&
@@ -34174,11 +35695,11 @@ added zero byte is not included in the returned count.
 .vitem &*int&~lss_match_domain(uschar&~*domain,&~uschar&~*list)*&
 This function checks for a match in a domain list. Domains are always
 matched caselessly. The return value is one of the following:
-.display
-&`OK     `& match succeeded
-&`FAIL   `& match failed
-&`DEFER  `& match deferred
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow &`OK`&    "match succeeded"
+.irow &`FAIL`&  "match failed"
+.irow &`DEFER`& "match deferred"
+.endtable
 DEFER is usually caused by some kind of lookup defer, such as the
 inability to contact a database.
 
@@ -34327,7 +35848,6 @@ dropping of a TCP/IP connection), you can call &'smtp_fflush()'&, which has no
 arguments. It flushes the output stream, and returns a non-zero value if there
 is an error.
 
-.new
 .vitem &*void&~*store_get(int,BOOL)*&
 This function accesses Exim's internal store (memory) manager. It gets a new
 chunk of memory whose size is given by the first argument.
@@ -34336,7 +35856,6 @@ data possibly coming from an attacker (eg. the message content),
 FALSE if it is locally-sourced.
 Exim bombs out if it ever
 runs out of memory. See the next section for a discussion of memory handling.
-.wen
 
 .vitem &*void&~*store_get_perm(int,BOOL)*&
 This function is like &'store_get()'&, but it always gets memory from the
@@ -34657,20 +36176,20 @@ address if its delivery failed.
 
 
 .section "Per-address filtering" "SECTperaddfil"
-.vindex "&$domain$&"
-.vindex "&$local_part$&"
+.vindex "&$domain_data$&"
+.vindex "&$local_part_data$&"
 In contrast to the system filter, which is run just once per message for each
 delivery attempt, it is also possible to set up a system-wide filtering
 operation that runs once for each recipient address. In this case, variables
-such as &$local_part$& and &$domain$& can be used, and indeed, the choice of
-filter file could be made dependent on them. This is an example of a router
-which implements such a filter:
+such as &$local_part_data$& and &$domain_data$& can be used,
+and indeed, the choice of filter file could be made dependent on them.
+This is an example of a router which implements such a filter:
 .code
 central_filter:
   check_local_user
   driver = redirect
   domains = +local_domains
-  file = /central/filters/$local_part
+  file = /central/filters/$local_part_data
   no_verify
   allow_filter
   allow_freeze
@@ -34912,8 +36431,7 @@ incoming SMTP message from a source that is not permitted to send them.
 
 
 .section "Resent- header lines" "SECID220"
-.cindex "&%Resent-%& header lines"
-.cindex "header lines" "Resent-"
+.chindex Resent-
 RFC 2822 makes provision for sets of header lines starting with the string
 &`Resent-`& to be added to a message when it is resent by the original
 recipient to somebody else. These headers are &'Resent-Date:'&,
@@ -34969,8 +36487,7 @@ existing &'Bcc:'& is not removed.
 
 
 .section "The Date: header line" "SECID223"
-.cindex "&'Date:'& header line"
-.cindex "header lines" "Date:"
+.cindex Date:
 If a locally-generated or submission-mode message has no &'Date:'& header line,
 Exim adds one, using the current date and time, unless the
 &%suppress_local_fixups%& control has been specified.
@@ -34987,8 +36504,7 @@ messages.
 
 
 .section "The Envelope-to: header line" "SECID225"
-.cindex "&'Envelope-to:'& header line"
-.cindex "header lines" "Envelope-to:"
+.chindex Envelope-to:
 .oindex "&%envelope_to_remove%&"
 &'Envelope-to:'& header lines are not part of the standard RFC 2822 header set.
 Exim can be configured to add them to the final delivery of messages. (See the
@@ -34999,8 +36515,7 @@ messages.
 
 
 .section "The From: header line" "SECTthefrohea"
-.cindex "&'From:'& header line"
-.cindex "header lines" "From:"
+.chindex From:
 .cindex "Sendmail compatibility" "&""From""& line"
 .cindex "message" "submission"
 .cindex "submission mode"
@@ -35043,8 +36558,7 @@ name as described in section &<<SECTconstr>>&.
 
 
 .section "The Message-ID: header line" "SECID226"
-.cindex "&'Message-ID:'& header line"
-.cindex "header lines" "Message-ID:"
+.chindex Message-ID:
 .cindex "message" "submission"
 .oindex "&%message_id_header_text%&"
 If a locally-generated or submission-mode incoming message does not contain a
@@ -35059,8 +36573,7 @@ in this header line by setting the &%message_id_header_text%& and/or
 
 
 .section "The Received: header line" "SECID227"
-.cindex "&'Received:'& header line"
-.cindex "header lines" "Received:"
+.chindex Received:
 A &'Received:'& header line is added at the start of every message. The
 contents are defined by the &%received_header_text%& configuration option, and
 Exim automatically adds a semicolon and a timestamp to the configured string.
@@ -35076,8 +36589,7 @@ changed to the time of acceptance, which is (apart from a small delay while the
 
 
 .section "The References: header line" "SECID228"
-.cindex "&'References:'& header line"
-.cindex "header lines" "References:"
+.chindex References:
 Messages created by the &(autoreply)& transport include a &'References:'&
 header line. This is constructed according to the rules that are described in
 section 3.64 of RFC 2822 (which states that replies should contain such a
@@ -35091,8 +36603,7 @@ incoming message. If there are more than 12, the first one and then the final
 
 
 .section "The Return-path: header line" "SECID229"
-.cindex "&'Return-path:'& header line"
-.cindex "header lines" "Return-path:"
+.chindex Return-path:
 .oindex "&%return_path_remove%&"
 &'Return-path:'& header lines are defined as something an MTA may insert when
 it does the final delivery of messages. (See the generic &%return_path_add%&
@@ -35105,7 +36616,7 @@ default), Exim removes &'Return-path:'& header lines from incoming messages.
 .section "The Sender: header line" "SECTthesenhea"
 .cindex "&'Sender:'& header line"
 .cindex "message" "submission"
-.cindex "header lines" "Sender:"
+.chindex Sender:
 For a locally-originated message from an untrusted user, Exim may remove an
 existing &'Sender:'& header line, and it may add a new one. You can modify
 these actions by setting the &%local_sender_retain%& option true, the
@@ -35428,13 +36939,14 @@ used to contain the envelope information.
 .cindex "outgoing LMTP over TCP/IP"
 .cindex "EHLO"
 .cindex "HELO"
-.cindex "SIZE option on MAIL command"
+.cindex "SIZE" "option on MAIL command"
 Outgoing SMTP and LMTP over TCP/IP is implemented by the &(smtp)& transport.
 The &%protocol%& option selects which protocol is to be used, but the actual
 processing is the same in both cases.
 
+.cindex "ESMTP extensions" SIZE
 If, in response to its EHLO command, Exim is told that the SIZE
-parameter is supported, it adds SIZE=<&'n'&> to each subsequent MAIL
+extension is supported, it adds SIZE=<&'n'&> to each subsequent MAIL
 command. The value of <&'n'&> is the message size plus the value of the
 &%size_addition%& option (default 1024) to allow for additions to the message
 such as per-transport header lines, or changes made in a
@@ -35830,7 +37342,8 @@ RCPT failures.
 
 .section "The ETRN command" "SECTETRN"
 .cindex "ETRN" "processing"
-RFC 1985 describes an SMTP command called ETRN that is designed to
+.cindex "ESMTP extensions" ETRN
+RFC 1985 describes an ESMTP command called ETRN that is designed to
 overcome the security problems of the TURN command (which has fallen into
 disuse). When Exim receives an ETRN command on a TCP/IP connection, it runs
 the ACL specified by &%acl_smtp_etrn%& in order to decide whether the command
@@ -36185,10 +37698,10 @@ lists in a separate domain from normal mail. For example:
 lists:
   driver = redirect
   domains = lists.example
-  file = /usr/lists/$local_part
+  file = ${lookup {$local_part} dsearch,ret=full {/usr/lists}}
   forbid_pipe
   forbid_file
-  errors_to = $local_part-request@lists.example
+  errors_to = ${quote_local_part:$local_part-request}@lists.example
   no_more
 .endd
 This router is skipped for domains other than &'lists.example'&. For addresses
@@ -36276,18 +37789,19 @@ lists_request:
   driver = redirect
   domains = lists.example
   local_part_suffix = -request
-  file = /usr/lists/$local_part$local_part_suffix
+  local_parts = ${lookup {$local_part} dsearch,filter=file {/usr/lists}}
+  file = /usr/lists/${local_part_data}-request
   no_more
 
 lists_post:
   driver = redirect
   domains = lists.example
-  senders = ${if exists {/usr/lists/$local_part}\
-             {lsearch;/usr/lists/$local_part}{*}}
-  file = /usr/lists/$local_part
+  local_parts = ${lookup {$local_part} dsearch,filter=file,ret=full {/usr/lists}}
+  senders = ${if exists {$local_part_data} {lsearch;$local_part_data}{*}}
+  file = ${lookup {$local_part} dsearch,ret=full {/usr/lists}}
   forbid_pipe
   forbid_file
-  errors_to = $local_part-request@lists.example
+  errors_to = ${quote_local_part:$local_part-request}@lists.example
   no_more
 
 lists_closed:
@@ -36345,7 +37859,7 @@ verp_smtp:
   max_rcpt = 1
   return_path = \
     ${if match {$return_path}{^(.+?)-request@your.dom.example\$}\
-      {$1-request+$local_part=$domain@your.dom.example}fail}
+      {${quote_local_part:$1-request+$local_part=$domain}@your.dom.example}fail}
 .endd
 This has the effect of rewriting the return path (envelope sender) on outgoing
 SMTP messages, if the local part of the original return path ends in
@@ -36396,7 +37910,7 @@ verp_dnslookup:
   transport = remote_smtp
   errors_to = \
     ${if match {$return_path}{^(.+?)-request@your.dom.example\$}}
-     {$1-request+$local_part=$domain@your.dom.example}fail}
+     {${quote_local_part:$1-request+$local_part=$domain}@your.dom.example}fail}
   no_more
 .endd
 Before you start sending out messages with VERPed return paths, you must also
@@ -36444,12 +37958,16 @@ to a router of this form:
 virtual:
   driver = redirect
   domains = dsearch;/etc/mail/virtual
-  data = ${lookup{$local_part}lsearch{/etc/mail/virtual/$domain}}
+  data = ${lookup{$local_part}lsearch{/etc/mail/virtual/$domain_data}}
   no_more
 .endd
 The &%domains%& option specifies that the router is to be skipped, unless there
 is a file in the &_/etc/mail/virtual_& directory whose name is the same as the
-domain that is being processed. When the router runs, it looks up the local
+domain that is being processed.
+The &(dsearch)& lookup used results in an untainted version of &$domain$&
+being placed into the &$domain_data$& variable.
+
+When the router runs, it looks up the local
 part in the file to find a new address (or list of addresses). The &%no_more%&
 setting ensures that if the lookup fails (leading to &%data%& being an empty
 string), Exim gives up on the address without trying any subsequent routers.
@@ -36478,7 +37996,7 @@ follows:
 .code
 my_mailboxes:
   driver = appendfile
-  file = /var/mail/$domain/$local_part
+  file = /var/mail/$domain_data/$local_part_data
   user = mail
 .endd
 This uses a directory of mailboxes for each domain. The &%user%& setting is
@@ -36518,7 +38036,7 @@ It runs a user's &_.forward_& file for all local parts of the form
 cases by testing the variable &$local_part_suffix$&. For example:
 .code
 if $local_part_suffix contains -special then
-save /home/$local_part/Mail/special
+save /home/$local_part_data/Mail/special
 endif
 .endd
 If the filter file does not exist, or does not deal with such addresses, they
@@ -36533,9 +38051,9 @@ another MTA:
 userforward:
   driver = redirect
   check_local_user
-  file = $home/.forward$local_part_suffix
   local_part_suffix = -*
   local_part_suffix_optional
+  file = ${lookup {.forward$local_part_suffix} dsearch,ret=full {$home} {$value}fail}
   allow_filter
 .endd
 If there is no suffix, &_.forward_& is used; if the suffix is &'-special'&, for
@@ -36652,6 +38170,7 @@ delivered immediately.
 .cindex "SMTP" "passed connection"
 .cindex "SMTP" "multiple deliveries"
 .cindex "multiple SMTP deliveries"
+.cindex "first pass routing"
 Mail waiting to be sent from an intermittently connected host will probably
 not have been routed, because without a connection DNS lookups are not
 possible. This means that if a normal queue run is done at connection time,
@@ -36885,9 +38404,9 @@ implying the use of a default path.
 When Exim encounters an empty item in the list, it searches the list defined by
 LOG_FILE_PATH, and uses the first item it finds that is neither empty nor
 &"syslog"&. This means that an empty item in &%log_file_path%& can be used to
-mean &"use the path specified at build time"&. It no such item exists, log
+mean &"use the path specified at build time"&. If no such item exists, log
 files are written in the &_log_& subdirectory of the spool directory. This is
-equivalent to the setting:
+equivalent to the configuration file setting:
 .code
 log_file_path = $spool_directory/log/%slog
 .endd
@@ -36898,7 +38417,7 @@ that is where the logs are written.
 A log file path may also contain &`%D`& or &`%M`& if datestamped log filenames
 are in use &-- see section &<<SECTdatlogfil>>& below.
 
-Here are some examples of possible settings:
+Here are some examples of possible Makefile settings:
 .display
 &`LOG_FILE_PATH=syslog                    `& syslog only
 &`LOG_FILE_PATH=:syslog                   `& syslog and default path
@@ -37073,16 +38592,16 @@ One line is written to the main log for each message received, and for each
 successful, unsuccessful, and delayed delivery. These lines can readily be
 picked out by the distinctive two-character flags that immediately follow the
 timestamp. The flags are:
-.display
-&`<=`&     message arrival
-&`(=`&     message fakereject
-&`=>`&     normal message delivery
-&`->`&     additional address in same delivery
-&`>>`&     cutthrough message delivery
-&`*>`&     delivery suppressed by &%-N%&
-&`**`&     delivery failed; address bounced
-&`==`&     delivery deferred; temporary problem
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow &%<=%&     "message arrival"
+.irow &%(=%&     "message fakereject"
+.irow &%=>%&     "normal message delivery"
+.irow &%->%&     "additional address in same delivery"
+.irow &%>>%&     "cutthrough message delivery"
+.irow &%*>%&     "delivery suppressed by &%-N%&"
+.irow &%**%&     "delivery failed; address bounced"
+.irow &%==%&     "delivery deferred; temporary problem"
+.endtable
 
 
 .section "Logging message reception" "SECID251"
@@ -37182,7 +38701,8 @@ fields record the router and transport that were used to process the address.
 If SMTP AUTH was used for the delivery there is an additional item A=
 followed by the name of the authenticator that was used.
 If an authenticated identification was set up by the authenticator's &%client_set_id%&
-option, this is logged too, separated by a colon from the authenticator name.
+option, this is logged too, as a second colon-separated list item.
+Optionally (see the &%smtp_mailauth%& &%log_selector%&) there may be a third list item.
 
 If a shadow transport was run after a successful local delivery, the log line
 for the successful delivery has an item added on the end, of the form
@@ -37196,8 +38716,9 @@ parentheses afterwards.
 When more than one address is included in a single delivery (for example, two
 SMTP RCPT commands in one transaction) the second and subsequent addresses are
 flagged with &`->`& instead of &`=>`&. When two or more messages are delivered
-down a single SMTP connection, an asterisk follows the IP address in the log
-lines for the second and subsequent messages.
+down a single SMTP connection, an asterisk follows the
+remote IP address (and port if enabled)
+in the log lines for the second and subsequent messages.
 When two or more messages are delivered down a single TLS connection, the
 DNS and some TLS-related information logged for the first message delivered
 will not be present in the log lines for the second and subsequent messages.
@@ -37309,7 +38830,7 @@ the following table:
 &`DKIM`&        domain verified in incoming message
 &`DN  `&        distinguished name from peer certificate
 &`DS  `&        DNSSEC secured lookups
-&`DT  `&        on &`=>`& lines: time taken for a delivery
+&`DT  `&        on &`=>`&, &'=='& and &'**'& lines: time taken for, or to attempt, a delivery
 &`F   `&        sender address (on delivery lines)
 &`H   `&        host name and IP address
 &`I   `&        local interface used
@@ -37399,63 +38920,64 @@ log_selector = +arguments -retry_defer
 .endd
 The list of optional log items is in the following table, with the default
 selection marked by asterisks:
-.display
-&` 8bitmime                   `&  received 8BITMIME status
-&`*acl_warn_skipped           `&  skipped &%warn%& statement in ACL
-&` address_rewrite            `&  address rewriting
-&` all_parents                `&  all parents in => lines
-&` arguments                  `&  command line arguments
-&`*connection_reject          `&  connection rejections
-&`*delay_delivery             `&  immediate delivery delayed
-&` deliver_time               `&  time taken to perform delivery
-&` delivery_size              `&  add &`S=`&&'nnn'& to => lines
-&`*dkim                       `&  DKIM verified domain on <= lines
-&` dkim_verbose               `&  separate full DKIM verification result line, per signature
-&`*dnslist_defer              `&  defers of DNS list (aka RBL) lookups
-&` dnssec                     `&  DNSSEC secured lookups
-&`*etrn                       `&  ETRN commands
-&`*host_lookup_failed         `&  as it says
-&` ident_timeout              `&  timeout for ident connection
-&` incoming_interface         `&  local interface on <= and => lines
-&` incoming_port              `&  remote port on <= lines
-&`*lost_incoming_connection   `&  as it says (includes timeouts)
-&` millisec                   `&  millisecond timestamps and RT,QT,DT,D times
-&`*msg_id                     `&  on <= lines, Message-ID: header value
-&` msg_id_created             `&  on <= lines, Message-ID: header value when one had to be added
-&` outgoing_interface         `&  local interface on => lines
-&` outgoing_port              `&  add remote port to => lines
-&`*queue_run                  `&  start and end queue runs
-&` queue_time                 `&  time on queue for one recipient
-&` queue_time_overall         `&  time on queue for whole message
-&` pid                        `&  Exim process id
-&` pipelining                 `&  PIPELINING use, on <= and => lines
-&` proxy                      `&  proxy address on <= and => lines
-&` receive_time               `&  time taken to receive message
-&` received_recipients        `&  recipients on <= lines
-&` received_sender            `&  sender on <= lines
-&`*rejected_header            `&  header contents on reject log
-&`*retry_defer                `&  &"retry time not reached"&
-&` return_path_on_delivery    `&  put return path on => and ** lines
-&` sender_on_delivery         `&  add sender to => lines
-&`*sender_verify_fail         `&  sender verification failures
-&`*size_reject                `&  rejection because too big
-&`*skip_delivery              `&  delivery skipped in a queue run
-&`*smtp_confirmation          `&  SMTP confirmation on => lines
-&` smtp_connection            `&  incoming SMTP connections
-&` smtp_incomplete_transaction`&  incomplete SMTP transactions
-&` smtp_mailauth              `&  AUTH argument to MAIL commands
-&` smtp_no_mail               `&  session with no MAIL commands
-&` smtp_protocol_error        `&  SMTP protocol errors
-&` smtp_syntax_error          `&  SMTP syntax errors
-&` subject                    `&  contents of &'Subject:'& on <= lines
-&`*tls_certificate_verified   `&  certificate verification status
-&`*tls_cipher                 `&  TLS cipher suite on <= and => lines
-&` tls_peerdn                 `&  TLS peer DN on <= and => lines
-&` tls_sni                    `&  TLS SNI on <= lines
-&` unknown_in_list            `&  DNS lookup failed in list match
-
-&` all                        `&  all of the above
-.endd
+.itable none 0 0 3 1pt left 10pt center 1pt left
+.irow &`8bitmime`&			&nbsp; "received 8BITMIME status"
+.irow &`acl_warn_skipped`&		*	"skipped &%warn%& statement in ACL"
+.irow &`address_rewrite`&		&nbsp; "address rewriting"
+.irow &`all_parents`&			&nbsp; "all parents in => lines"
+.irow &`arguments`&			&nbsp; "command line arguments"
+.irow &`connection_reject`&		*	"connection rejections"
+.irow &`delay_delivery`&		*	"immediate delivery delayed"
+.irow &`deliver_time`&			&nbsp; "time taken to attempt delivery"
+.irow &`delivery_size`&			&nbsp; "add &`S=`&&'nnn'& to => lines"
+.irow &`dkim`&				*	"DKIM verified domain on <= lines"
+.irow &`dkim_verbose`&			&nbsp; "separate full DKIM verification result line, per signature"
+.irow &`dnslist_defer`&			*	"defers of DNS list (aka RBL) lookups"
+.irow &`dnssec`&			&nbsp; "DNSSEC secured lookups"
+.irow &`etrn`&				*	"ETRN commands"
+.irow &`host_lookup_failed`&		*	"as it says"
+.irow &`ident_timeout`&			&nbsp; "timeout for ident connection"
+.irow &`incoming_interface`&		&nbsp; "local interface on <= and => lines"
+.irow &`incoming_port`&			&nbsp; "remote port on <= lines"
+.irow &`lost_incoming_connection`&	*	"as it says (includes timeouts)"
+.irow &`millisec`&			&nbsp; "millisecond timestamps and RT,QT,DT,D times"
+.irow &`msg_id`&			*	"on <= lines, Message-ID: header value"
+.irow &`msg_id_created`&		&nbsp; "on <= lines, Message-ID: header value when one had to be added"
+.irow &`outgoing_interface`&		&nbsp; "local interface on => lines"
+.irow &`outgoing_port`&			&nbsp; "add remote port to => lines"
+.irow &`queue_run`&			*	"start and end queue runs"
+.irow &`queue_time`&			&nbsp; "time on queue for one recipient"
+.irow &`queue_time_exclusive`&		&nbsp; "exclude recieve time from QT times"
+.irow &`queue_time_overall`&		&nbsp; "time on queue for whole message"
+.irow &`pid`&				&nbsp; "Exim process id"
+.irow &`pipelining`&			&nbsp; "PIPELINING use, on <= and => lines"
+.irow &`proxy`&				&nbsp; "proxy address on <= and => lines"
+.irow &`receive_time`&			&nbsp; "time taken to receive message"
+.irow &`received_recipients`&		&nbsp; "recipients on <= lines"
+.irow &`received_sender`&		&nbsp; "sender on <= lines"
+.irow &`rejected_header`&		*	"header contents on reject log"
+.irow &`retry_defer`&			*	"&<quote>&retry time not reached&</quote>&"
+.irow &`return_path_on_delivery`&	&nbsp; "put return path on => and ** lines"
+.irow &`sender_on_delivery`&		&nbsp; "add sender to => lines"
+.irow &`sender_verify_fail`&		*	"sender verification failures"
+.irow &`size_reject`&			*	"rejection because too big"
+.irow &`skip_delivery`&			*	"delivery skipped in a queue run"
+.irow &`smtp_confirmation`&		*	"SMTP confirmation on => lines"
+.irow &`smtp_connection`&		&nbsp; "incoming SMTP connections"
+.irow &`smtp_incomplete_transaction`&	&nbsp; "incomplete SMTP transactions"
+.irow &`smtp_mailauth`&			&nbsp; "AUTH argument to MAIL commands"
+.irow &`smtp_no_mail`&			&nbsp; "session with no MAIL commands"
+.irow &`smtp_protocol_error`&		&nbsp; "SMTP protocol errors"
+.irow &`smtp_syntax_error`&		&nbsp; "SMTP syntax errors"
+.irow &`subject`&			&nbsp; "contents of &'Subject:'& on <= lines"
+.irow &`tls_certificate_verified`&	*	"certificate verification status"
+.irow &`tls_cipher`&			*	"TLS cipher suite on <= and => lines"
+.irow &`tls_peerdn`&			&nbsp; "TLS peer DN on <= and => lines"
+.irow &`tls_resumption`&		&nbsp; "append * to cipher field"
+.irow &`tls_sni`&			&nbsp; "TLS SNI on <= lines"
+.irow &`unknown_in_list`&		&nbsp; "DNS lookup failed in list match"
+.irow &`all`&				&nbsp; "&*all of the above*&"
+.endtable
 See also the &%slow_lookup_log%& main configuration option,
 section &<<SECID99>>&
 
@@ -37563,6 +39085,7 @@ routing email addresses, but it does apply to &"byname"& lookups.
 client's ident port times out.
 .next
 .cindex "log" "incoming interface"
+.cindex "log" "outgoing interface"
 .cindex "log" "local interface"
 .cindex "log" "local address and port"
 .cindex "TCP/IP" "logging local address and port"
@@ -37571,7 +39094,8 @@ client's ident port times out.
 to the &"<="& line as an IP address in square brackets, tagged by I= and
 followed by a colon and the port number. The local interface and port are also
 added to other SMTP log lines, for example, &"SMTP connection from"&, to
-rejection lines, and (despite the name) to outgoing &"=>"& and &"->"& lines.
+rejection lines, and (despite the name) to outgoing
+&"=>"&, &"->"&, &"=="& and &"**"& lines.
 The latter can be disabled by turning off the &%outgoing_interface%& option.
 .next
 .cindex log "incoming proxy address"
@@ -37649,7 +39173,7 @@ On accept lines, where PIPELINING was offered but not used by the client,
 the field has a minus appended.
 
 .cindex "pipelining" "early connection"
-If Exim is built with the SUPPORT_PIPE_CONNECT build option
+If Exim is built without the DISABLE_PIPE_CONNECT build option
 accept "L" fields have a period appended if the feature was
 offered but not used, or an asterisk appended if used.
 Delivery "L" fields have an asterisk appended if used.
@@ -37662,18 +39186,13 @@ Delivery "L" fields have an asterisk appended if used.
 .cindex "log" "queue time"
 &%queue_time%&: The amount of time the message has been in the queue on the
 local host is logged as QT=<&'time'&> on delivery (&`=>`&) lines, for example,
-&`QT=3m45s`&. The clock starts when Exim starts to receive the message, so it
-includes reception time as well as the delivery time for the current address.
-This means that it may be longer than the difference between the arrival and
-delivery log line times, because the arrival log line is not written until the
-message has been successfully received.
+&`QT=3m45s`&.
 If millisecond logging is enabled, short times will be shown with greater
 precision, eg. &`QT=1.578s`&.
 .next
 &%queue_time_overall%&: The amount of time the message has been in the queue on
 the local host is logged as QT=<&'time'&> on &"Completed"& lines, for
-example, &`QT=3m45s`&. The clock starts when Exim starts to receive the
-message, so it includes reception time as well as the total delivery time.
+example, &`QT=3m45s`&.
 .next
 .cindex "log" "receive duration"
 &%receive_time%&: For each message, the amount of real time it has taken to
@@ -37732,10 +39251,12 @@ it is too big.
 .cindex "log" "frozen messages; skipped"
 .cindex "frozen messages" "logging skipping"
 &%skip_delivery%&: A log line is written whenever a message is skipped during a
-queue run because it is frozen or because another process is already delivering
-it.
+queue run because it another process is already delivering it or because
+it is frozen.
 .cindex "&""spool file is locked""&"
-The message that is written is &"spool file is locked"&.
+.cindex "&""message is frozen""&"
+The message that is written is either &"spool file is locked"& or
+&"message is frozen"&.
 .next
 .cindex "log" "smtp confirmation"
 .cindex "SMTP" "logging confirmation"
@@ -37838,7 +39359,7 @@ unchanged, or whether they should be rendered as escape sequences.
 when TLS is in use. The item is &`CV=yes`& if the peer's certificate was
 verified
 using a CA trust anchor,
-&`CA=dane`& if using a DNS trust anchor,
+&`CV=dane`& if using a DNS trust anchor,
 and &`CV=no`& if not.
 .next
 .cindex "log" "TLS cipher"
@@ -37852,8 +39373,15 @@ connection, the cipher suite used is added to the log line, preceded by X=.
 connection, and a certificate is supplied by the remote host, the peer DN is
 added to the log line, preceded by DN=.
 .next
+.cindex "log" "TLS resumption"
+.cindex "TLS" "logging session resumption"
+&%tls_resumption%&: When a message is sent or received over an encrypted
+connection and the TLS session resumed one used on a previous TCP connection,
+an asterisk is appended to the X= cipher field in the log line.
+.next
 .cindex "log" "TLS SNI"
 .cindex "TLS" "logging SNI"
+.cindex SNI logging
 &%tls_sni%&: When a message is received over an encrypted connection, and
 the remote host provided the Server Name Indication extension, the SNI is
 added to the log line, preceded by SNI=.
@@ -37910,9 +39438,9 @@ the next chapter. The utilities described here are:
   "check address acceptance from given IP"
 .irow &<<SECTdbmbuild>>&      &'exim_dbmbuild'& "build a DBM file"
 .irow &<<SECTfinindret>>&     &'exinext'&       "extract retry information"
-.irow &<<SECThindatmai>>&     &'exim_dumpdb'&   "dump a hints database"
-.irow &<<SECThindatmai>>&     &'exim_tidydb'&   "clean up a hints database"
-.irow &<<SECThindatmai>>&     &'exim_fixdb'&    "patch a hints database"
+.irow &<<SECTdumpdb>>&        &'exim_dumpdb'&   "dump a hints database"
+.irow &<<SECTtidydb>>&        &'exim_tidydb'&   "clean up a hints database"
+.irow &<<SECTfixdb>>&         &'exim_fixdb'&    "patch a hints database"
 .irow &<<SECTmailboxmaint>>&  &'exim_lock'&     "lock a mailbox file"
 .endtable
 
@@ -37947,12 +39475,12 @@ but the format of the output is different. For this reason, there are some
 system configuration options that configure exactly how &'exiwhat'& works. If
 it doesn't seem to be working for you, check the following compile-time
 options:
-.display
-&`EXIWHAT_PS_CMD    `& the command for running &'ps'&
-&`EXIWHAT_PS_ARG    `& the argument for &'ps'&
-&`EXIWHAT_EGREP_ARG `& the argument for &'egrep'& to select from &'ps'& output
-&`EXIWHAT_KILL_ARG  `& the argument for the &'kill'& command
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow &`EXIWHAT_PS_CMD`&	"the command for running &'ps'&"
+.irow &`EXIWHAT_PS_ARG`&	"the argument for &'ps'&"
+.irow &`EXIWHAT_EGREP_ARG`&	"the argument for &'egrep'& to select from &'ps'& output"
+.irow &`EXIWHAT_KILL_ARG`&	"the argument for the &'kill'& command"
+.endtable
 An example of typical output from &'exiwhat'& is
 .code
 164 daemon: -q1h, listening on port 25
@@ -37978,9 +39506,6 @@ or (in case &*-a*& switch is specified)
 .code
 exim -bp
 .endd
-The &*-C*& option is used to specify an alternate &_exim.conf_& which might
-contain alternate exim configuration the queue management might be using.
-
 to obtain a queue listing, and then greps the output to select messages
 that match given criteria. The following selection options are available:
 
@@ -38037,7 +39562,20 @@ Display messages in reverse order.
 Include delivered recipients in queue listing.
 .endlist
 
+The following options give alternates for configuration:
+
+.vlist
+.vitem &*-C*&&~<&'config&~file'&>
+is used to specify an alternate &_exim.conf_& which might
+contain alternate exim configuration the queue management might be using.
+
+.vitem &*-E*&&~<&'path'&>
+can be used to specify a path for the exim binary,
+overriding the built-in one.
+.endlist
+
 There is one more option, &%-h%&, which outputs a list of options.
+At least one selection option, or either the &*-c*& or &*-h*& option, must be given.
 
 
 
@@ -38397,6 +39935,8 @@ for remote hosts
 .next
 &'ratelimit'&: the data for implementing the ratelimit ACL condition
 .next
+&'tls'&: TLS session resumption data
+.next
 &'misc'&: other hints data
 .endlist
 
@@ -38414,15 +39954,20 @@ in a transport)
 
 
 
-.section "exim_dumpdb" "SECID261"
+.section "exim_dumpdb" "SECTdumpdb"
 .cindex "&'exim_dumpdb'&"
 The entire contents of a database are written to the standard output by the
-&'exim_dumpdb'& program, which has no options or arguments other than the
-spool and database names. For example, to dump the retry database:
+&'exim_dumpdb'& program,
+taking as arguments the spool and database names.
+An option &'-z'& may be given to request times in UTC;
+otherwise times are in the local timezone.
+An option &'-k'& may be given to dump only the record keys.
+For example, to dump the retry database:
 .code
 exim_dumpdb /var/spool/exim retry
 .endd
-Two lines of output are produced for each entry:
+For the retry database
+two lines of output are produced for each entry:
 .code
 T:mail.ref.example:192.168.242.242 146 77 Connection refused
 31-Oct-1995 12:00:12 02-Nov-1995 12:21:39 02-Nov-1995 20:21:39 *
@@ -38451,7 +39996,7 @@ cross-references.
 
 
 
-.section "exim_tidydb" "SECID262"
+.section "exim_tidydb" "SECTtidydb"
 .cindex "&'exim_tidydb'&"
 The &'exim_tidydb'& utility program is used to tidy up the contents of a hints
 database. If run with no options, it removes all records that are more than 30
@@ -38500,11 +40045,11 @@ databases is likely to keep on increasing.
 
 
 
-.section "exim_fixdb" "SECID263"
+.section "exim_fixdb" "SECTfixdb"
 .cindex "&'exim_fixdb'&"
 The &'exim_fixdb'& program is a utility for interactively modifying databases.
 Its main use is for testing Exim, but it might also be occasionally useful for
-getting round problems in a live system. It has no options, and its interface
+getting round problems in a live system. Its interface
 is somewhat crude. On entry, it prompts for input with a right angle-bracket. A
 key of a database record can then be entered, and the data for that record is
 displayed.
@@ -38521,6 +40066,10 @@ resets the time of the next delivery attempt. Time values are given as a
 sequence of digit pairs for year, month, day, hour, and minute. Colons can be
 used as optional separators.
 
+Both displayed and input times are in the local timezone by default.
+If an option &'-z'& is used on the command line, displayed times
+are in UTC.
+
 
 
 
@@ -39291,7 +40840,7 @@ Consider the use of the &%inlisti%& expansion condition instead.
 .cindex "security" "data sources"
 .cindex "security" "regular expressions"
 .cindex "regular expressions" "security"
-.cindex "PCRE" "security"
+.cindex "PCRE2" "security"
 If configuration data for Exim can come from untrustworthy sources, there
 are some issues to be aware of:
 
@@ -39301,7 +40850,7 @@ Use of &%${expand...}%& may provide a path for shell injection attacks.
 Letting untrusted data provide a regular expression is unwise.
 .next
 Using &%${match...}%& to apply a fixed regular expression against untrusted
-data may result in pathological behaviour within PCRE.  Be aware of what
+data may result in pathological behaviour within PCRE2.  Be aware of what
 "backtracking" means and consider options for being more strict with a regular
 expression. Avenues to explore include limiting what can match (avoiding &`.`&
 when &`[a-z0-9]`& or other character class will do), use of atomic grouping and
@@ -39542,8 +41091,16 @@ was received, in the conventional Unix form &-- the number of seconds since the
 start of the epoch. The second number is a count of the number of messages
 warning of delayed delivery that have been sent to the sender.
 
-There follow a number of lines starting with a hyphen. These can appear in any
-order, and are omitted when not relevant:
+There follow a number of lines starting with a hyphen.
+These contain variables, can appear in any
+order, and are omitted when not relevant.
+
+If there is a second hyphen after the first,
+the corresponding data is tainted.
+If there is a value in parentheses, the data is quoted for a lookup.
+
+The following word specifies a variable,
+and the remainder of the item depends on the variable.
 
 .vlist
 .vitem "&%-acl%&&~<&'number'&>&~<&'length'&>"
@@ -39699,9 +41256,6 @@ was received from the client, this records the Distinguished Name from that
 certificate.
 .endlist
 
-Any of the above may have an extra hyphen prepended, to indicate the the
-corresponding data is untrusted.
-
 Following the options there is a list of those addresses to which the message
 is not to be delivered. This set of addresses is initialized from the command
 line when the &%-t%& option is used and &%extract_addresses_remove_arguments%&
@@ -39810,8 +41364,8 @@ There is no dot-stuffing (and no dot-termination).
 . ////////////////////////////////////////////////////////////////////////////
 . ////////////////////////////////////////////////////////////////////////////
 
-.chapter "DKIM, SPF and DMARC" "CHAPdkim" &&&
-         "DKIM, SPF and DMARC Support"
+.chapter "DKIM, SPF, SRS and DMARC" "CHAPdkim" &&&
+         "DKIM, SPF, SRS and DMARC Support"
 
 .section "DKIM (DomainKeys Identified Mail)" SECDKIM
 .cindex "DKIM"
@@ -39886,25 +41440,34 @@ but for EC keys it is the base64 of the pure key; no ASN.1 wrapping.
 Signing is enabled by setting private options on the SMTP transport.
 These options take (expandable) strings as arguments.
 
-.option dkim_domain smtp string list&!! unset
+.option dkim_domain smtp "string list&!!" unset
 The domain(s) you want to sign with.
 After expansion, this can be a list.
 Each element in turn,
 lowercased,
+.vindex "&$dkim_domain$&"
 is put into the &%$dkim_domain%& expansion variable
 while expanding the remaining signing options.
 If it is empty after expansion, DKIM signing is not done,
 and no error will result even if &%dkim_strict%& is set.
 
-.option dkim_selector smtp string list&!! unset
+.option dkim_selector smtp "string list&!!" unset
 This sets the key selector string.
 After expansion, which can use &$dkim_domain$&, this can be a list.
 Each element in turn is put in the expansion
+.vindex "&$dkim_selector$&"
 variable &%$dkim_selector%& which may be used in the &%dkim_private_key%&
 option along with &%$dkim_domain%&.
 If the option is empty after expansion, DKIM signing is not done for this domain,
 and no error will result even if &%dkim_strict%& is set.
 
+To do, for example, dual-signing with RSA and EC keys
+this could be be used:
+.code
+dkim_selector = ec_sel : rsa_sel
+dkim_private_key = KEYS_DIR/$dkim_selector
+.endd
+
 .option dkim_private_key smtp string&!! unset
 This sets the private key to use.
 You can use the &%$dkim_domain%& and
@@ -39929,6 +41492,8 @@ To generate keys under OpenSSL:
 openssl genrsa -out dkim_rsa.private 2048
 openssl rsa -in dkim_rsa.private -out /dev/stdout -pubout -outform PEM
 .endd
+The result file from the first command should be retained, and
+this option set to use it.
 Take the base-64 lines from the output of the second command, concatenated,
 for the DNS TXT record.
 See section 3.6 of RFC6376 for the record specification.
@@ -40001,7 +41566,7 @@ only supports signing with the same canonicalization method for both headers and
 .option dkim_strict smtp string&!! unset
 This  option  defines  how  Exim  behaves  when  signing a message that
 should be signed fails for some reason.  When the expansion evaluates to
-either "1" or "true", Exim will defer. Otherwise Exim will send the message
+either &"1"& or &"true"&, Exim will defer. Otherwise Exim will send the message
 unsigned. You can use the &%$dkim_domain%& and &%$dkim_selector%& expansion
 variables here.
 
@@ -40013,16 +41578,17 @@ in the message signature.
 When unspecified, the header names listed in RFC4871 will be used,
 whether or not each header is present in the message.
 The default list is available for the expansion in the macro
-"_DKIM_SIGN_HEADERS".
+&"_DKIM_SIGN_HEADERS"&
+and an oversigning variant is in &"_DKIM_OVERSIGN_HEADERS"&.
 
 If a name is repeated, multiple headers by that name (or the absence thereof)
 will be signed.  The textually later headers in the headers part of the
 message are signed first, if there are multiples.
 
-A name can be prefixed with either an '=' or a '+' character.
-If an '=' prefix is used, all headers that are present with this name
+A name can be prefixed with either an &"="& or a &"+"& character.
+If an &"="& prefix is used, all headers that are present with this name
 will be signed.
-If a '+' prefix if used, all headers that are present with this name
+If a &"+"& prefix if used, all headers that are present with this name
 will be signed, and one signature added for a missing header with the
 name will be appended.
 
@@ -40264,6 +41830,8 @@ Notes from the key record (tag n=).
 
 .vitem &%$dkim_key_length%&
 Number of bits in the key.
+Valid only once the key is loaded, which is at the time the header signature
+is verified, which is after the body hash is.
 
 Note that RFC 8301 says:
 .code
@@ -40271,9 +41839,8 @@ Verifiers MUST NOT consider signatures using RSA keys of
 less than 1024 bits as valid signatures.
 .endd
 
-To enforce this you must have a DKIM ACL which checks this variable
-and overwrites the &$dkim_verify_status$& variable as discussed above.
-As EC keys are much smaller, the check should only do this for RSA keys.
+This is enforced by the default setting for the &%dkim_verify_min_keysizes%&
+option.
 
 .endlist
 
@@ -40288,10 +41855,10 @@ verb to a group of domains or identities. For example:
 
 .code
 # Warn when Mail purportedly from GMail has no gmail signature
-warn log_message = GMail sender without gmail.com DKIM signature
-     sender_domains = gmail.com
+warn sender_domains = gmail.com
      dkim_signers = gmail.com
      dkim_status = none
+     log_message = GMail sender without gmail.com DKIM signature
 .endd
 
 Note that the above does not check for a total lack of DKIM signing;
@@ -40303,10 +41870,10 @@ results against the actual result of verification. This is typically used
 to restrict an ACL verb to a list of verification outcomes, for example:
 
 .code
-deny message = Mail from Paypal with invalid/missing signature
-     sender_domains = paypal.com:paypal.de
+deny sender_domains = paypal.com:paypal.de
      dkim_signers = paypal.com:paypal.de
      dkim_status = none:invalid:fail
+     message = Mail from Paypal with invalid/missing signature
 .endd
 
 The possible status keywords are: 'none','invalid','fail' and 'pass'. Please
@@ -40377,6 +41944,9 @@ You may deny messages when this occurs.
 .vitem &%temperror%&
 This indicates a temporary error during all processing, including Exim's
 SPF processing.  You may defer messages when this occurs.
+
+.vitem &%invalid%&
+There was an error during processing of the SPF lookup
 .endlist
 
 You can prefix each string with an exclamation mark to  invert
@@ -40390,13 +41960,16 @@ deny spf = fail
      message = $sender_host_address is not allowed to send mail from \
                ${if def:sender_address_domain \
                     {$sender_address_domain}{$sender_helo_name}}.  \
-               Please see http://www.open-spf.org/Why?scope=\
-               ${if def:sender_address_domain {mfrom}{helo}};\
+               Please see http://www.open-spf.org/Why;\
                identity=${if def:sender_address_domain \
                              {$sender_address}{$sender_helo_name}};\
                ip=$sender_host_address
 .endd
 
+Note: The above mentioned URL may not be as helpful as expected. You are
+encouraged to replace the link with a link to a site with more
+explanations.
+
 When the spf condition has run, it sets up several expansion
 variables:
 
@@ -40410,10 +41983,14 @@ variables:
 
 .vitem &$spf_received$&
 .vindex &$spf_received$&
-  This contains a complete Received-SPF: header that can be
-  added to the message. Please note that according to the SPF
-  draft, this header must be added at the top of the header
-  list. Please see section 10 on how you can do this.
+  This contains a complete Received-SPF: header (name and
+  content) that can be added to the message. Please note that
+  according to the SPF draft, this header must be added at the
+  top of the header list, i.e. with
+.code
+add_header = :at_start:$spf_received
+.endd
+  See section &<<SECTaddheadacl>>& for further details.
 
   Note: in case of "Best-guess" (see below), the convention is
   to put this string in a header called X-SPF-Guess: instead.
@@ -40421,8 +41998,8 @@ variables:
 .vitem &$spf_result$&
 .vindex &$spf_result$&
   This contains the outcome of the SPF check in string form,
-  one of pass, fail, softfail, none, neutral, permerror or
-  temperror.
+  currently one of pass, fail, softfail, none, neutral, permerror,
+  temperror, or &"(invalid)"&.
 
 .vitem &$spf_result_guessed$&
 .vindex &$spf_result_guessed$&
@@ -40431,8 +42008,11 @@ variables:
 
 .vitem &$spf_smtp_comment$&
 .vindex &$spf_smtp_comment$&
+.vindex &%spf_smtp_comment_template%&
   This contains a string that can be used in a SMTP response
   to the calling party. Useful for "fail".
+  The string is generated by the SPF library from the template configured in the main config
+  option &%spf_smtp_comment_template%&.
 .endlist
 
 
@@ -40493,6 +42073,107 @@ The lookup will return the same result strings as can appear in
 
 
 
+.section "SRS (Sender Rewriting Scheme)" SECTSRS
+.cindex SRS "sender rewriting scheme"
+
+SRS can be used to modify sender addresses when forwarding so that
+SPF verification does not object to them.
+It operates by encoding the original envelope sender in a new
+sender local part and using a domain run by the forwarding site
+as the new domain for the sender.  Any DSN message should be returned
+to this new sender at the forwarding site, which can extract the
+original sender from the coded local part and forward the DSN to
+the originator.
+
+This is a way of avoiding the breakage that SPF does to forwarding.
+The constructed local-part will be longer than the original,
+leading to possible problems with very long addresses.
+The changing of the sender address also hinders the tracing of mail
+problems.
+
+Exim can be built to include native SRS support.  To do this
+SUPPORT_SRS=yes must be defined in &_Local/Makefile_&.
+If this has been done, the macros _HAVE_SRS and _HAVE_NATIVE_SRS
+will be defined.
+The support is limited to SRS0-encoding; SRS1 is not supported.
+
+.cindex SRS excoding
+To encode an address use this expansion item:
+.vlist
+.vitem &*${srs_encode&~{*&<&'secret'&>&*}{*&<&'return&~path'&>&*}{*&<&'original&~domain'&>&*}}*&
+.cindex "&%srs_encode%& expansion item"
+.cindex SRS "expansion item"
+The first argument should be a secret known and used by all systems
+handling the recipient domain for the original message.
+There is no need to periodically change this key; a timestamp is also
+encoded.
+The second argument should be given as the envelope sender address before this
+encoding operation.
+If this value is empty the the expansion result will be empty.
+The third argument should be the recipient domain of the message when
+it arrived at this system.
+.endlist
+
+.cindex SRS decoding
+To decode an address use this expansion condition:
+.vlist
+.vitem &*inbound_srs&~{*&<&'local&~part'&>&*}{*&<&'secret'&>&*}*&
+The first argument should be the recipient local prt as is was received.
+The second argument is the site secret.
+
+If the messages is not for an SRS-encoded recipient the condition will
+return false.  If it is, the condition will return true and the variable
+&$srs_recipient$& will be set to the decoded (original) value.
+.endlist
+
+Example usage:
+.code
+  #macro
+  SRS_SECRET = <pick something unique for your site for this. Use on all MXs.>
+
+  #routers
+
+  outbound:
+    driver =    dnslookup
+    # if outbound, and forwarding has been done, use an alternate transport
+    domains =   ! +my_domains
+    transport = ${if eq {$local_part@$domain} \
+                        {$original_local_part@$original_domain} \
+                     {remote_smtp} {remote_forwarded_smtp}}
+
+  inbound_srs:
+    driver =    redirect
+    senders =   :
+    domains =   +my_domains
+    # detect inbound bounces which are SRS'd, and decode them
+    condition = ${if inbound_srs {$local_part} {SRS_SECRET}}
+    data =      $srs_recipient
+
+  inbound_srs_failure:
+    driver =    redirect
+    senders =   :
+    domains =   +my_domains
+    # detect inbound bounces which look SRS'd but are invalid
+    condition = ${if inbound_srs {$local_part} {}}
+    allow_fail
+    data =      :fail: Invalid SRS recipient address
+
+  #... further routers here
+
+
+  # transport; should look like the non-forward outbound
+  # one, plus the max_rcpt and return_path options
+  remote_forwarded_smtp:
+    driver =              smtp
+    # modify the envelope from, for mails that we forward
+    max_rcpt =            1
+    return_path =         ${srs_encode {SRS_SECRET} {$return_path} {$original_domain}}
+.endd
+
+
+
+
+
 .section DMARC SECDMARC
 .cindex DMARC verification
 
@@ -40525,10 +42206,10 @@ defines the location of a text file of valid
 top level domains the opendmarc library uses
 during domain parsing. Maintained by Mozilla,
 the most current version can be downloaded
-from a link at &url(https://publicsuffix.org/list/, currently pointing
-at https://publicsuffix.org/list/public_suffix_list.dat)
-See also util/renew-opendmarc-tlds.sh script.
-The default for the option is /etc/exim/opendmarc.tlds.
+from a link at &url(https://publicsuffix.org/list/public_suffix_list.dat).
+See also the util/renew-opendmarc-tlds.sh script.
+The default for the option is unset.
+If not set, DMARC processing is disabled.
 
 
 The &%dmarc_history_file%& option, if set
@@ -40602,16 +42283,16 @@ The &"dmarc_status"& condition takes a list of strings on its
 right-hand side.  These strings describe recommended action based
 on the DMARC check.  To understand what the policy recommendations
 mean, refer to the DMARC website above.  Valid strings are:
-.display
-&'accept      '& The DMARC check passed and the library recommends accepting the email.
-&'reject      '& The DMARC check failed and the library recommends rejecting the email.
-&'quarantine  '& The DMARC check failed and the library recommends keeping it for further inspection.
-&'none        '& The DMARC check passed and the library recommends no specific action, neutral.
-&'norecord    '& No policy section in the DMARC record for this sender domain.
-&'nofrom      '& Unable to determine the domain of the sender.
-&'temperror   '& Library error or dns error.
-&'off         '& The DMARC check was disabled for this email.
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow &'accept'&	"The DMARC check passed and the library recommends accepting the email"
+.irow &'reject'&	"The DMARC check failed and the library recommends rejecting the email"
+.irow &'quarantine'&	"The DMARC check failed and the library recommends keeping it for further inspection"
+.irow &'none'&		"The DMARC check passed and the library recommends no specific action, neutral"
+.irow &'norecord'&	"No policy section in the DMARC record for this RFC5322.From field"
+.irow &'nofrom'&	"Unable to determine the domain of the sender"
+.irow &'temperror'&	"Library error or dns error"
+.irow &'off'&		"The DMARC check was disabled for this email"
+.endtable
 You can prefix each string with an exclamation mark to invert its
 meaning, for example "!accept" will match all results but
 "accept".  The string list is evaluated left-to-right in a
@@ -40771,18 +42452,19 @@ automatically determines which version is in use.
 The Proxy Protocol header is the first data received on a TCP connection
 and is inserted before any TLS-on-connect handshake from the client; Exim
 negotiates TLS between Exim-as-server and the remote client, not between
-Exim and the proxy server.
+Exim and the proxy server. The Proxy Protocol header must be received
+within &%proxy_protocol_timeout%&, which defaults to 3s.
 
 The following expansion variables are usable
 (&"internal"& and &"external"& here refer to the interfaces
 of the proxy):
-.display
-&'proxy_external_address   '& IP of host being proxied or IP of remote interface of proxy
-&'proxy_external_port      '& Port of host being proxied or Port on remote interface of proxy
-&'proxy_local_address      '& IP of proxy server inbound or IP of local interface of proxy
-&'proxy_local_port         '& Port of proxy server inbound or Port on local interface of proxy
-&'proxy_session            '& boolean: SMTP connection via proxy
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow $proxy_external_address	"IP of host being proxied or IP of remote interface of proxy"
+.irow $proxy_external_port	"Port of host being proxied or Port on remote interface of proxy"
+.irow $proxy_local_address	"IP of proxy server inbound or IP of local interface of proxy"
+.irow $proxy_local_port		"Port of proxy server inbound or Port on local interface of proxy"
+.irow $proxy_session		"boolean: SMTP connection via proxy"
+.endtable
 If &$proxy_session$& is set but &$proxy_external_address$& is empty
 there was a protocol error.
 The variables &$sender_host_address$& and &$sender_host_port$&
@@ -40803,8 +42485,8 @@ A possible solution is:
   # Or do some kind of IP lookup in a flat file or database
   # LIMIT = ${lookup{$sender_host_address}iplsearch{/etc/exim/proxy_limits}}
 
-  defer   message        = Too many connections from this IP right now
-          ratelimit      = LIMIT / 5s / per_conn / strict
+  defer   ratelimit      = LIMIT / 5s / per_conn / strict
+          message        = Too many connections from this IP right now
 .endd
 
 
@@ -40829,15 +42511,15 @@ is an IP address and any subsequent elements are options.
 
 Options are a string <name>=<value>.
 The list of options is in the following table:
-.display
-&'auth   '& authentication method
-&'name   '& authentication username
-&'pass   '& authentication password
-&'port   '& tcp port
-&'tmo    '& connection timeout
-&'pri    '& priority
-&'weight '& selection bias
-.endd
+.itable none 0 0 2 1pt left 1pt left
+.irow &'auth'&	"authentication method"
+.irow &'name'&	"authentication username"
+.irow &'pass'&	"authentication password"
+.irow &'port'&	"tcp port"
+.irow &'tmo'&	"connection timeout"
+.irow &'pri'&	"priority"
+.irow &'weight'& "selection bias"
+.endtable
 
 More details on each of these options follows:
 
@@ -40900,6 +42582,7 @@ requirement, upon libidn2.
 
 .section "MTA operations" SECTi18nMTA
 .cindex SMTPUTF8 "ESMTP option"
+.cindex "ESMTP extensions" SMTPUTF8
 The main configuration option &%smtputf8_advertise_hosts%& specifies
 a host list.  If this matches the sending host and
 accept_8bitmime is true (the default) then the ESMTP option
@@ -40946,22 +42629,27 @@ may use the following modifier:
 control = utf8_downconvert
 control = utf8_downconvert/<value>
 .endd
-This sets a flag requiring that addresses are converted to
-a-label form before smtp delivery, for use in a
-Message Submission Agent context.
+This sets a flag requiring that envelope addresses are converted to
+a-label form before smtp delivery.
+This is usually for use in a Message Submission Agent context,
+but could be used for any message.
+
 If a value is appended it may be:
-.display
-&`1  `& (default) mandatory downconversion
-&`0  `& no downconversion
-&`-1 `& if SMTPUTF8 not supported by destination host
-.endd
+.itable none 0 0 2 1pt right 1pt left
+.irow &`1`&	"mandatory downconversion"
+.irow &`0`&	"no downconversion"
+.irow &`-1`&	"if SMTPUTF8 not supported by destination host"
+.endtable
+If no value is given, 1 is used.
 
 If mua_wrapper is set, the utf8_downconvert control
 is initially set to -1.
 
 The smtp transport has an option &%utf8_downconvert%&.
 If set it must expand to one of the three values described above,
-and it overrides any previously set value.
+or an empty string.
+If non-empty it overrides value previously set
+(due to mua_wrapper or by an ACL control).
 
 
 There is no explicit support for VRFY and EXPN.
@@ -41052,21 +42740,23 @@ The name is placed in the variable &$event_name$& and the event action
 expansion must check this, as it will be called for every possible event type.
 
 The current list of events is:
-.display
-&`dane:fail              after    transport  `& per connection
-&`msg:complete           after    main       `& per message
-&`msg:delivery           after    transport  `& per recipient
-&`msg:rcpt:host:defer    after    transport  `& per recipient per host
-&`msg:rcpt:defer         after    transport  `& per recipient
-&`msg:host:defer         after    transport  `& per attempt
-&`msg:fail:delivery      after    transport  `& per recipient
-&`msg:fail:internal      after    main       `& per recipient
-&`tcp:connect            before   transport  `& per connection
-&`tcp:close              after    transport  `& per connection
-&`tls:cert               before   both       `& per certificate in verification chain
-&`smtp:connect           after    transport  `& per connection
-&`smtp:ehlo              after    transport  `& per connection
-.endd
+.itable all 0 0 4 1pt left 1pt center 1pt center 1pt left
+.irow dane:fail              after    transport  "per connection"
+.irow msg:complete           after    main       "per message"
+.irow msg:defer              after    transport  "per message per delivery try"
+.irow msg:delivery           after    transport  "per recipient"
+.irow msg:rcpt:host:defer    after    transport  "per recipient per host"
+.irow msg:rcpt:defer         after    transport  "per recipient"
+.irow msg:host:defer         after    transport  "per host per delivery try; host errors"
+.irow msg:fail:delivery      after    transport  "per recipient"
+.irow msg:fail:internal      after    main       "per recipient"
+.irow tcp:connect            before   transport  "per connection"
+.irow tcp:close              after    transport  "per connection"
+.irow tls:cert               before   both       "per certificate in verification chain"
+.irow tls:fail:connect       after    main       "per connection"
+.irow smtp:connect           after    transport  "per connection"
+.irow smtp:ehlo              after    transport  "per connection"
+.endtable
 New event types may be added in future.
 
 The event name is a colon-separated list, defining the type of
@@ -41082,22 +42772,24 @@ should define the event action.
 
 An additional variable, &$event_data$&, is filled with information varying
 with the event type:
-.display
-&`dane:fail            `& failure reason
-&`msg:delivery         `& smtp confirmation message
-&`msg:fail:internal    `& failure reason
-&`msg:fail:delivery    `& smtp error message
-&`msg:rcpt:host:defer  `& error string
-&`msg:rcpt:defer       `& error string
-&`msg:host:defer       `& error string
-&`tls:cert             `& verification chain depth
-&`smtp:connect         `& smtp banner
-&`smtp:ehlo            `& smtp ehlo response
-.endd
+.itable all 0 0 2 1pt left 1pt left
+.irow dane:fail            "failure reason"
+.irow msg:defer            "error string"
+.irow msg:delivery         "smtp confirmation message"
+.irow msg:fail:internal    "failure reason"
+.irow msg:fail:delivery    "smtp error message"
+.irow msg:host:defer       "error string"
+.irow msg:rcpt:host:defer  "error string"
+.irow msg:rcpt:defer       "error string"
+.irow tls:cert             "verification chain depth"
+.irow tls:fail:connect     "error string"
+.irow smtp:connect         "smtp banner"
+.irow smtp:ehlo            "smtp ehlo response"
+.endtable
 
 The :defer events populate one extra variable: &$event_defer_errno$&.
 
-For complex operations an ACL expansion can be used in &%event_action%&
+For complex operations an ACL expansion can be used in &%event_action%&,
 however due to the multiple contexts that Exim operates in during
 the course of its processing:
 .ilist
@@ -41113,11 +42805,11 @@ a useful way of writing to the main log.
 The expansion of the event_action option should normally
 return an empty string.  Should it return anything else the
 following will be forced:
-.display
-&`tcp:connect      `&  do not connect
-&`tls:cert         `&  refuse verification
-&`smtp:connect     `&  close connection
-.endd
+.itable all 0 0 2 1pt left 1pt left
+.irow tcp:connect      "do not connect"
+.irow tls:cert         "refuse verification"
+.irow smtp:connect     "close connection"
+.endtable
 All other message types ignore the result string, and
 no other use is made of it.