X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/4840604e4f365545a43f01d0e953ce33afd1c3d5..806c3df997132e99f4abade6d00be18930695408:/src/OS/Makefile-Base?ds=sidebyside diff --git a/src/OS/Makefile-Base b/src/OS/Makefile-Base index 1500e85ec..e0bdeecfd 100644 --- a/src/OS/Makefile-Base +++ b/src/OS/Makefile-Base @@ -7,6 +7,7 @@ SHELL = $(MAKE_SHELL) SCRIPTS = ../scripts +O = ../OS EDITME = ../Local/Makefile EXIMON_EDITME = ../Local/eximon.conf @@ -32,9 +33,10 @@ FE = $(FULLECHO) # up-to-date. Then the os-specific source files and the C configuration file # are set up, and finally it goes to the main Exim target. -all: $(EDITME) checklocalmake Makefile os.h os.c config.h version.h allexim +all: utils exim +config: $(EDITME) checklocalmake Makefile os.c config.h version.h -checklocalmake: +checklocalmake: @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \ $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \ $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \ @@ -75,12 +77,29 @@ Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \ # Build (link) the os.h file -os.h: +os.h: $(SCRIPTS)/Configure-os.h \ + $(O)/os.h-AIX $(O)/os.h-BSDI $(O)/os.h-cygwin \ + $(O)/os.h-Darwin $(O)/os.h-DGUX $(O)/os.h-DragonFly \ + $(O)/os.h-FreeBSD $(O)/os.h-GNU $(O)/os.h-GNUkFreeBSD \ + $(O)/os.h-GNUkNetBSD $(O)/os.h-HI-OSF \ + $(O)/os.h-HI-UX $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \ + $(O)/os.h-IRIX $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \ + $(O)/os.h-IRIX65 $(O)/os.h-Linux $(O)/os.h-mips \ + $(O)/os.h-NetBSD $(O)/os.h-NetBSD-a.out \ + $(O)/os.h-OpenBSD $(O)/os.h-OpenUNIX $(O)/os.h-OSF1 \ + $(O)/os.h-QNX $(O)/os.h-SCO $(O)/os.h-SCO_SV \ + $(O)/os.h-SunOS4 $(O)/os.h-SunOS5 $(O)/os.h-SunOS5-hal \ + $(O)/os.h-ULTRIX $(O)/os.h-UNIX_SV \ + $(O)/os.h-Unixware7 $(O)/os.h-USG $(SHELL) $(SCRIPTS)/Configure-os.h # Build the os.c file -os.c: ../src/os.c +os.c: ../src/os.c \ + $(SCRIPTS)/Configure-os.c \ + $(O)/os.c-cygwin $(O)/os.c-GNU $(O)/os.c-HI-OSF \ + $(O)/os.c-IRIX $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \ + $(O)/os.c-IRIX65 $(O)/os.c-Linux $(O)/os.c-OSF1 $(SHELL) $(SCRIPTS)/Configure-os.c # Build the config.h file. @@ -94,20 +113,16 @@ config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME) # therefore always be run, even if the files exist. This shouldn't in fact be a # problem, but it does no harm. Other make programs will just ignore this. -.PHONY: all allexim buildauths buildlookups buildpdkim buildrouters \ +.PHONY: all config utils \ + buildauths buildlookups buildpdkim buildrouters \ buildtransports checklocalmake clean -# This is the real default target for all the various exim binaries and -# scripts, once the configuring stuff is done. - -allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \ +utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \ exigrep eximstats exipick exiqgrep exiqsumm \ transport-filter.pl convert4r3 convert4r4 \ exim_checkaccess \ - exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \ - buildlookups buildrouters buildtransports \ - buildauths buildpdkim exim + exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock # Targets for special-purpose configuration header builders @@ -117,7 +132,7 @@ buildconfig: buildconfig.c # Target for the exicyclog utility script -exicyclog: Makefile config.h ../src/exicyclog.src +exicyclog: config ../src/exicyclog.src @rm -f exicyclog @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ @@ -142,7 +157,7 @@ exicyclog: Makefile config.h ../src/exicyclog.src @echo ">>> exicyclog script built" # Target for the exinext utility script -exinext: Makefile config.h ../src/exinext.src +exinext: config ../src/exinext.src @rm -f exinext @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ @@ -157,7 +172,7 @@ exinext: Makefile config.h ../src/exinext.src @echo ">>> exinext script built" # Target for the exiwhat utility script -exiwhat: Makefile config.h ../src/exiwhat.src +exiwhat: config ../src/exiwhat.src @rm -f exiwhat @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ @@ -178,7 +193,7 @@ exiwhat: Makefile config.h ../src/exiwhat.src @echo ">>> exiwhat script built" # Target for the exim_checkaccess utility script -exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src +exim_checkaccess: config ../src/exim_checkaccess.src @rm -f exim_checkaccess @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ @@ -194,7 +209,7 @@ exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src @echo ">>> exim_checkaccess script built"; echo "" # Target for the Exim monitor start-up script -eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \ +eximon: config ../src/eximon.src ../OS/eximon.conf-Default \ ../Local/eximon.conf @rm -f eximon $(SHELL) $(SCRIPTS)/Configure-eximon @@ -298,14 +313,21 @@ convert4r4: Makefile ../src/convert4r4.src OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o OBJ_WITH_OLD_DEMIME = demime.o -OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o dmarc.o +OBJ_EXPERIMENTAL = bmi_spam.o \ + dane.o \ + dcc.o \ + dmarc.o \ + imap_utf7.o \ + spf.o \ + srs.o \ + utf8.o # Targets for final binaries; the main one has a build number which is # updated each time. We don't bother with that for the auxiliaries. OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o -OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \ +OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \ directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \ filtertest.o globals.o dkim.o \ header.o host.o ip.o log.o lss.o match.o moan.o \ @@ -313,12 +335,13 @@ OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \ rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \ route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \ std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \ + environment.o \ $(OBJ_LOOKUPS) \ local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \ $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL) -exim: lookups/lookups.a auths/auths.a pdkim/pdkim.a \ - routers/routers.a transports/transports.a \ +exim: buildlookups buildauths pdkim/pdkim.a \ + buildrouters buildtransports \ $(OBJ_EXIM) version.o @echo "$(LNCC) -o exim" $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \ @@ -355,7 +378,7 @@ exim_dumpdb: $(OBJ_DUMPDB) OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o -exim_fixdb: $(OBJ_FIXDB) auths/auths.a +exim_fixdb: $(OBJ_FIXDB) buildauths @echo "$(LNCC) -o exim_fixdb" $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \ auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB) @@ -396,7 +419,7 @@ exim_dbmbuild: exim_dbmbuild.o # The utility for locking a mailbox while messing around with it -exim_lock: exim_lock.c +exim_lock: exim_lock.c os.h @echo "$(CC) exim_lock.c" $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c @echo "$(LNCC) -o exim_lock" @@ -448,8 +471,28 @@ eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \ # in one. This list is overkill, but it doesn't really take much time to # rebuild Exim on a modern computer. -HDRS = config.h dbfunctions.h dbstuff.h exim.h functions.h globals.h local_scan.h macros.h mytypes.h structs.h -PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h +HDRS = config.h \ + dbfunctions.h \ + dbstuff.h \ + exim.h \ + functions.h \ + globals.h \ + local_scan.h \ + macros.h \ + mytypes.h \ + structs.h \ + os.h +PHDRS = ../config.h \ + ../dbfunctions.h \ + ../dbstuff.h \ + ../exim.h \ + ../functions.h \ + ../globals.h \ + ../local_scan.h \ + ../macros.h \ + ../mytypes.h \ + ../structs.h \ + ../os.h .SUFFIXES: .o .c .c.o:; @echo "$(CC) $*.c" @@ -531,13 +574,14 @@ util-os.o: $(HDRS) os.c # The local scan module depends only on its own special header, and is compiled # from a source whose location is set by configuration. -local_scan.o: Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE) +local_scan.o: config local_scan.h ../$(LOCAL_SCAN_SOURCE) @echo "$(CC) local_scan.c" $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE) # Dependencies for the "ordinary" exim modules acl.o: $(HDRS) acl.c +base64.o: $(HDRS) mime.h base64.c child.o: $(HDRS) child.c crypt16.o: $(HDRS) crypt16.c daemon.o: $(HDRS) daemon.c @@ -549,6 +593,7 @@ dns.o: $(HDRS) dns.c enq.o: $(HDRS) enq.c exim.o: $(HDRS) exim.c expand.o: $(HDRS) expand.c +environment.o: $(HDRS) environment.c filter.o: $(HDRS) filter.c filtertest.o: $(HDRS) filtertest.c globals.o: $(HDRS) globals.c @@ -578,17 +623,19 @@ spool_out.o: $(HDRS) spool_out.c std-crypto.o: $(HDRS) std-crypto.c store.o: $(HDRS) store.c string.o: $(HDRS) string.c -tls.o: $(HDRS) tls.c tls-gnu.c tls-openssl.c +tls.o: $(HDRS) tls.c setenv.c \ + tls-gnu.c tlscert-gnu.c \ + tls-openssl.c tlscert-openssl.c tod.o: $(HDRS) tod.c transport.o: $(HDRS) transport.c tree.o: $(HDRS) tree.c verify.o: $(HDRS) verify.c -dkim.o: $(HDRS) dkim.c +dkim.o: $(HDRS) pdkim/pdkim.h dkim.c # Dependencies for WITH_CONTENT_SCAN modules malware.o: $(HDRS) malware.c -mime.o: $(HDRS) mime.c +mime.o: $(HDRS) mime.h mime.c regex.o: $(HDRS) regex.c spam.o: $(HDRS) spam.c spool_mbox.o: $(HDRS) spool_mbox.c @@ -596,16 +643,19 @@ spool_mbox.o: $(HDRS) spool_mbox.c # Dependencies for WITH_OLD_DEMIME modules -demime.o: $(HDRS) demime.c +demime.o: $(HDRS) demime.c # Dependencies for EXPERIMENTAL_* modules -bmi_spam.o: $(HDRS) bmi_spam.c -spf.o: $(HDRS) spf.h spf.c -srs.o: $(HDRS) srs.h srs.c -dcc.o: $(HDRS) dcc.h dcc.c -dmarc.o: $(HDRS) dmarc.h dmarc.c +bmi_spam.o: $(HDRS) bmi_spam.c +dane.o: $(HDRS) dane.c dane-gnu.c dane-openssl.c +dcc.o: $(HDRS) dcc.h dcc.c +dmarc.o: $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c +imap_utf7.o: $(HDRS) imap_utf7.c +spf.o: $(HDRS) spf.h spf.c +srs.o: $(HDRS) srs.h srs.c +utf8.o: $(HDRS) utf8.c # The module containing tables of available lookups, routers, auths, and # transports must be rebuilt if any of them are. However, because the makefiles @@ -621,7 +671,7 @@ drtables.o: $(HDRS) drtables.c # When using parallel make, we don't have the dependency to force building # in the sub-directory unless we force that dependency: -$(OBJ_LOOKUPS): lookups/lookups.a +$(OBJ_LOOKUPS): buildlookups # The exim monitor's private modules - the sources live in a private # subdirectory. The final binary combines the private modules with some @@ -649,7 +699,7 @@ $(MONBIN): $(HDRS) # The lookups library. -buildlookups lookups/lookups.a: config.h version.h +buildlookups: config @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \ @@ -658,7 +708,7 @@ buildlookups lookups/lookups.a: config.h version.h # The routers library. -buildrouters routers/routers.a: config.h +buildrouters: config @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" @@ -666,7 +716,7 @@ buildrouters routers/routers.a: config.h # The transports library. -buildtransports transports/transports.a: config.h +buildtransports: config @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" @@ -674,7 +724,7 @@ buildtransports transports/transports.a: config.h # The library of authorization modules -buildauths auths/auths.a: config.h +buildauths: config @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" @@ -682,7 +732,8 @@ buildauths auths/auths.a: config.h # The PDKIM library -buildpdkim pdkim/pdkim.a: config.h +buildpdkim: pdkim/pdkim.a +pdkim/pdkim.a: config @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" @@ -715,11 +766,11 @@ sa-os.o: $(HDRS) os.c # These are the test targets themselves test_dbfn: config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \ - string.o tod.o version.o + string.o tod.o version.o utf8.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \ dummies.o sa-globals.o sa-os.o store.o string.o \ - tod.o version.o $(LIBS) $(DBMLIB) + tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS) rm -f dbfn.o test_host: config.h child.c host.c dns.c dummies.c sa-globals.o os.o \ @@ -733,23 +784,24 @@ test_host: config.h child.c host.c dns.c dummies.c sa-globals.o os.o \ tod.o tree.o $(LIBS) $(LIBRESOLV) rm -f child.o dummies.o host.o dns.o -test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o +test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \ - sa-globals.o store.o string.o tod.o $(LIBS) + sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS) rm -f os.o test_parse: config.h parse.c dummies.o sa-globals.o \ - store.o string.o tod.o version.o + store.o string.o tod.o version.o utf8.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c $(LNCC) -o test_parse $(LFLAGS) parse.o \ - dummies.o sa-globals.o store.o string.o tod.o version.o + dummies.o sa-globals.o store.o string.o tod.o version.o \ + utf8.o $(LDFLAGS) rm -f parse.o -test_string: config.h string.c dummies.o sa-globals.o store.o tod.o +test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \ - dummies.o sa-globals.o store.o tod.o $(LIBS) + dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS) rm -f string.o # End