X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/456682f5dbf8f8f9a97b3f1cebf07d4770b834b2..382afc6ba69545d52398da6b437e487aa23f185d:/doc/doc-txt/ChangeLog?ds=inline diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index 2215122b5..c508ee545 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -1,8 +1,247 @@ -$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.258 2005/11/14 13:56:49 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.315 2006/02/28 12:42:47 ph10 Exp $ Change log file for Exim from version 4.21 ------------------------------------------- +Exim version 4.61 +----------------- + +PH/01 The code for finding all the local interface addresses on a FreeBSD + system running IPv6 was broken. This may well have applied to all BSD + systems, as well as to others that have similar system calls. The broken + code found IPv4 interfaces correctly, but gave incorrect values for the + IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was + that it would not match correctly against @[] and not recognize the IPv6 + addresses as local. + +PH/02 The ipliteral router was not recognizing addresses of the form user@ + [ipv6:....] because it didn't know about the "ipv6:" prefix. + +PH/03 Added disable_ipv6. + +PH/04 Changed $reply_address to use the raw form of the headers instead of the + decoded form, because it is most often used to construct To: headers + lines in autoreplies, and the decoded form may well be syntactically + invalid. However, $reply_address has leading white space removed, and all + newlines turned into spaces so that the autoreply transport does not + grumble. + +PH/05 If group was specified without a user on a router, and no group or user + was specified on a transport, the group from the router was ignored. + +PH/06 Increased the number of ACL variables to 20 of each type, and arranged + for visible compile-time settings that can be used to change these + numbers, for those that want even more. Backwards compatibility with old + spool files has been maintained. However, going back to a previous Exim + release will lost any variables that are in spool files. + +PH/07 Two small changes when running in the test harness: increase delay when + passing a TCP/IP connection to a new process, in case the original + process has to generate a bounce, and remove special handling of + 127.0.0.2 (sic), which is no longer necessary. + +PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to + be the same on different OS. + +PH/09 Moved a debug statement in filter processing to avoid a race problem when + testing. + +JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:" + whether --show-vars was specified or not + +JJ/02 exipick: Added support for new ACL variable spool format introduced + in 4.61-PH/06 + +PH/10 Fixed another bug related to PH/04 above: if an incoming message had a + syntactically invalid From: or Reply-to: line, and a filter used this to + generate an autoreply, and therefore failed to obtain an address for the + autoreply, Exim could try to deliver to a non-existent relative file + name, causing unrelated and misleading errors. What now happens is that + it logs this as a hard delivery error, but does not attempt to create a + bounce message. + +PH/11 The exinext utility has a -C option for testing purposes, but although + the given file was scanned by exinext itself; it wasn't being passed on + when Exim was called. + +PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as + an end-of-file indication when reading a command response. + +PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was + compiled. In many other places in Exim, IPv6 addresses are always + recognized, so I have changed this. It also means that IPv4 domain + literals of the form [IPV4:n.n.n.n] are now always recognized. + +PH/14 When a uid/gid is specified for the queryprogram router, it cannot be + used if the router is not running as root, for example, when verifying at + ACL time, or when using -bh. The debugging output from this situation was + non-existent - all you got was a failure to exec. I have made two + changes: + + (a) Failures to set uid/gid, the current directory, or a process leader + in a subprocess such as that created by queryprogram now generate + suitable debugging ouput when -d is set. + + (b) The queryprogram router detects when it is not running as root, + outputs suitable debugging information if -d is set, and then runs + the subprocess without attempting to change uid/gid. + +PH/15 Minor change to Makefile for building test_host (undocumented testing + feature). + +PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the + additional section of a DNS packet that returns MX or SRV records. + Instead, it always explicitly searches for A/AAAA records. This avoids + major problems that occur when a DNS server includes only records of one + type (A or AAAA) in an MX/SRV packet. A byproduct of this change has + fixed another bug: if SRV records were looked up and the corresponding + address records were *not* found in the additional section, the port + values from the SRV records were lost. + +PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not + using the correct key (the original address) when searching the retry + rules in order to find which one to use for generating the retry hint. + +PH/18 If quota_warn_message contains a From: header, Exim now refrains from + adding the default one. Similarly, if it contains a Reply-To: header, the + errors_reply_to option, if set, is not used. + +PH/19 When calculating a retry time, Exim used to measure the "time since + failure" by looking at the "first failed" field in the retry record. Now + it does not use this if it is later than than the arrival time of the + message. Instead it uses the arrival time. This makes for better + behaviour in cases where some deliveries succeed, thus re-setting the + "first failed" field. An example is a quota failure for a huge message + when small messages continue to be delivered. Without this change, the + "time since failure" will always be short, possible causing more frequent + delivery attempts for the huge message than are intended. + +PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as + $1, $2, $3) because the numerical variables can be reset during some + expansion items (e.g. "match"), thereby losing the authentication data. + +PH/21 Make -bV show the size of off_t variables so that the test suite can + decide whether to run tests for quotas > 2G. + +PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold, + mailbox_size, and mailbox_filecount in the appendfile transport. If a + filecount value is greater than 2G or if a quota value is greater than 2G + on a system where the size of off_t is not greater than 4, a panic error + is given. + +PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can + never match. The debug and -bh output now contains an explicit error + message indicating a malformed IPv4 address or mask. + +PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address + 1.2.3.4 without a mask. Now it is not recognized as an IP address, and + PH/23 above applies. + +PH/25 Do not write to syslog when running in the test harness. The only + occasion when this arises is a failure to open the main or panic logs + (for which there is an explicit test). + +PH/26 Added the /no_tell option to "control=freeze". + +PH/27 If a host name lookup failed very early in a connection, for example, if + the IP address matched host_lookup and the reverse lookup yielded a name + that did not have a forward lookup, an error message of the form "no IP + address found for host xxx.xxx.xxx (during SMTP connection from NULL)" + could be logged. Now it outputs the IP address instead of "NULL". + +PH/28 An enabling patch from MH: add new function child_open_exim2() which + allows the sender and the authenticated sender to be set when + submitting a message from within Exim. Since child_open_exim() is + documented for local_scan(), the new function should be too. + +PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being + ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that + results in an empty string is now treated as unset. + +PH/30 Fix eximon buffer overflow bug (Bugzilla #73). + +PH/31 Added sender_verify_fail logging option. + +PH/32 In November 2003, the code in Exim that added an empty Bcc: header when + needed by RFC 822 but not by RFC 2822 was commented out. I have now + tidied the source and removed it altogether. + +PH/33 When a queue run was abandoned because the load average was too high, a + log line was always written; now it is written only if the queue_run log + selector is set. In addition, the log line for abandonment now contains + information about the queue run such as the pid. This is always present + in "start" and "stop" lines but was omitted from the "abandon" line. + +PH/34 Omit spaces between a header name and the colon in the error message that + is given when verify = headers_syntax fails (if there are lots of them, + the message gets confusing). + +PH/35 Change the default for dns_check_names_pattern to allow slashes within + names, as there are now some PTR records that contain slashes. This check + is only to protect against broken name servers that fall over on strange + characters, so the fact that it applies to all lookups doesn't matter. + +PH/36 Now that the new test suite is complete, we can remove some of the + special code in Exim that was needed for the old test suite. For example, + sorting DNS records because real resolvers return them in an arbitrary + order. The new test suite's fake resolver always returns records in the + same order. + +PH/37 When running in the test harness, use -odi for submitted messages (e.g. + bounces) except when queue_only is set, to avoid logging races between + the different processes. + +PH/38 Panic-die if .include specifies a non-absolute path. + +PH/39 A tweak to the "H" retry rule from its user. + +JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified + a label. They prevented compilation on older perls. + +JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused + a warning to be raised on newish perls. + +JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages + on queue. Changes to match documented behaviour of showing count of + messages matching specified criteria. + +PH/40 Changed the default ident timeout from 30s to 5s. + +PH/41 Added support for the use of login_cap features, on those BSD systems + that have them, for controlling the resources used by pipe deliveries. + +PH/42 The content-scanning code uses fopen() to create files in which to put + message data. Previously it was not paying any attention to the mode of + the files. Exim runs with umask(0) because the rest of the code creates + files with open(), and sets the required mode explicitly. Thus, these + files were ending up world-writeable. This was not a big issue, because, + being within the spool directory, they were not world-accessible. I have + created a function called modefopen, which takes an additional mode + argument. It sets umask(777), creates the file, chmods it to the required + mode, then resets the umask. All the relevant calls to fopen() in the + content scanning code have been changed to use this function. + +PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset + to 24 hours. This avoids potential overflow problems when processing G + and H retry rules. I suspect nobody ever tinkers with this value. + +PH/44 Added STRIP_COMMAND=/usr/bin/strip to the FreeBSD Makefile. + +PH/45 When the plaintext authenticator is running as a client, the server's + challenges are checked to ensure they are valid base64 strings. By + default, the authentication attempt is cancelled if an invalid string is + received. Setting client_ignore_invalid_base64 true ignores these errors. + The decoded challenge strings are now placed in $auth1, $auth2, etc. as + they are received. Thus, the responses can be made to depend on the + challenges. If an invalid string is ignored, an empty string is placed in + the variable. + +PH/46 Messages that are created by the autoreply transport now contains a + References: header, in accordance with RFCs 2822 and 3834. + +PH/47 Added authenticated_sender_force to the smtp transport. + + Exim version 4.60 ----------------- @@ -117,7 +356,54 @@ PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to processes, except for messages which are automatic responses to other messages. +PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}" + to the default Received: header definition. + +PH/12 Added log selector acl_warn_skipped (default on). + +PH/13 After a successful wildlsearch lookup, discard the values of numeric + variables because (a) they are in the wrong storage pool and (b) even if + they were copied, it wouldn't work properly because of the caching. + +PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length + checking when decoding. Apparently there are clients that generate + overlong encoded strings. Why am I not surprised? + +PH/15 If the first argument of "${if match_address" was not empty, but did not + contain an "@" character, Exim crashed. Now it writes a panic log message + and treats the condition as false. + +PH/16 In autoreply, treat an empty string for "once" the same as unset. +PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve + extension "envelope-auth". The code is finished and in agreement with + other implementations, but there is no documentation so far and in fact, + nobody wrote the draft yet. This extension is currently #undef'ed, thus + not changing the active code. + + Print executed "if" and "elsif" statements when debugging is used. This + helps a great deal to understand what a filter does. + + Document more things not specified clearly in RFC3028. I had all this + sorted out, when out of a sudden new issues came to my mind. Oops." + +PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists + (Bugzilla #53). + +PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated + canonical form (as documented). However, after a host name lookup from + the IP address, check_host() was doing a simple string comparison with + addresses acquired from the DNS when checking that the found name did + have the original IP as one of its addresses. Since any found IPv6 + addresses are likely to be in abbreviated form, the comparison could + fail. Luckily, there already exists a function for doing the comparison + by converting both addresses to binary, so now that is used instead of + the text comparison. + +PH/20 There was another similar case to PH/19, when a complete host name was + given in a host list; looking up its IP address could give an abbreviated + form, whereas the current host's name might or might not be abbreviated. + The same fix has been applied. Exim version 4.54 @@ -148,6 +434,7 @@ PH/05 Some modifications to the interface to the fake nameserver for the new testing suite. + Exim version 4.53 -----------------