X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/3ec3e3bba0e3a5bb855046805b7bcda6c0e327e3..4da37662868dcfd8ec23ad9d7f643ef014b1a42b:/doc/doc-txt/experimental-spec.txt diff --git a/doc/doc-txt/experimental-spec.txt b/doc/doc-txt/experimental-spec.txt index 67737e9a6..f61db629e 100644 --- a/doc/doc-txt/experimental-spec.txt +++ b/doc/doc-txt/experimental-spec.txt @@ -1,263 +1,12 @@ -$Cambridge: exim/doc/doc-txt/experimental-spec.txt,v 1.4 2005/07/21 21:22:53 jetmore Exp $ - From time to time, experimental features may be added to Exim. While a feature is experimental, there will be a build-time option whose name starts "EXPERIMENTAL_" that must be set in order to include the feature. This file contains information -about experimenatal features, all of which are unstable and -liable to incompatibile change. - +about experimental features, all of which are unstable and +liable to incompatible change. -1. Yahoo DomainKeys support --------------------------------------------------------------- - -DomainKeys (DK) support is built into Exim using the -"libdomainkeys" reference library implementation. It is -available at - -http://domainkeys.sf.net - -You must build this library on your system and compile Exim -against it. To build Exim with DK support, add these lines to -your Local/Makefile: - -EXPERIMENTAL_DOMAINKEYS=yes -CFLAGS += -I/home/tom/exim-cvs/extra/libdomainkeys -LDFLAGS += -ldomainkeys -L/home/tom/exim-cvs/extra/libdomainkeys - -Remember to tweak the CFLAGS and LDFLAGS lines to match the -location of the libdomainkeys includes and lib on your system. - -The current experimental implementation supports two -independent functions: - -o Validate incoming DK-signed email. -o Sign outgoing email with DK. - -The former is implemented in the ACLs for SMTP, the latter as -an extension to the SMTP transport. That means both facilities -are limited to SMTP I/O. - - - -1) Validate incoming email - -Incoming messages are fed to the DK validation process as they -are received "on the wire". This happens synchronously to -Exim's buffering of the message in the spool. - -You must set "control = dk_verify" in one of the ACLs -preceding DATA (you will typically use acl_smtp_rcpt), at a -point where non-local, non-relay, non-submission mail is -processed. If that control flag is not set, the message will -NOT be verified. - -Example: - -warn log_message = Feeding message to DK validator. - control = dk_verify - -You can check for the outcome of the DK check in the ACL after -data (acl_smtp_data), using a number of ACL conditions and/or -expansion variables. - - - -1.1.) DK ACL conditions - - dk_sender_domains = - - This condition takes a domainlist as argument and - succeeds if the domain that DK has been verifying for is - found in the list. - - - dk_senders =
- - This condition takes an addresslist as argument and - succeeds if the address that DK has been verifying for - is found in the list. - - - dk_sender_local_parts = - - This condition takes a local_part list as argument - and succeeds if the domain that DK has been - verifying for is found in the list. - - - dk_status = - - This condition takes a list of keywords as argument, and - succeeds if one of the listed keywords matches the outcome - of the DK check. The available keywords are: - - good DK check succeeded, mail is verified. - bad DK check failed. - no signature Mail is not signed with DK. - no key Public key missing in target domain DNS. - bad format Public key available, but unuseable. - non-participant Target domain states not to participate in DK. - revoked The signing key has been revoked by the domain. - - - dk_policy = - - This condition takes a list of keywords as argument, and - succeeds if one of the listed keywords matches the policy - announced by the target domain. The available keywords - are: - - signsall The target domain signs all outgoing email. - testing The target domain is currently testing DK. - - - dk_domain_source = - - This condition takes a list of keywords as argument, and - succeeds if one of the listed keywords matches the - location where DK found the sender domain it verified for. - The available keywords are: - - from The domain came from the "From:" header. - sender The domain came from the "Sender:" header. - none DK was unable to find the responsible domain. - - - -1.2.) DK verification expansion variables - - $dk_sender_domain - - Contains the domain that DK has verified for. - - - $dk_sender - - Contains the address that DK has verified for. - - - $dk_sender_local_part - - Contains the local part that DK has verified for. - - - $dk_sender_source - - Contains the "source" of the above three variables, one of - - "from" The address came from the "From:" header. - "sender" The address came from the "Sender:" header. - - When DK was unable to find a valid address, this variable - is "0". - - - $dk_signsall - - Is "1" if the target domain signs all outgoing email, - "0" otherwise. - - - $dk_testing - - Is "1" if the target domain is testing DK, "0" otherwise. - - - $dk_is_signed - - Is "1" if the message is signed, "0" otherwise. - - - $dk_status - - Contains the outcome of the DK check as a string, commonly - used to add a "DomainKey-Status:" header to messages. Will - contain one of: - - good DK check succeeded, mail is verified. - bad DK check failed. - no signature Mail is not signed with DK. - no key Public key missing in target domain DNS. - bad format Public key available, but unuseable. - non-participant Target domain states not to participate in DK. - revoked The signing key has been revoked by the domain. - - - $dk_result - - Contains a human-readable result of the DK check, more - verbose than $dk_status. Useful for logging purposes. - - - -2) Sign outgoing email with DK - -Outgoing messages are signed just before Exim puts them "on -the wire". The only thing that happens after DK signing is -eventual TLS encryption. - -Signing is implemented by setting private options on the SMTP -transport. These options take (expandable) strings as -arguments. The most important variable to use in these -expansions is $dk_domain. It contains the domain that DK wants -to sign for. - - - dk_selector = [MANDATORY] - - This sets the key selector string. You can use the - $dk_domain expansion variable to look up a matching - selector. The result is put in the expansion variable - $dk_selector which should be used in the dk_private_key - option along with $dk_domain. - - - dk_private_key = [MANDATORY] - - This sets the private key to use. You SHOULD use the - $dk_domain and $dk_selector expansion variables to - determine the private key to use. The result can either - - o be a valid RSA private key in ASCII armor, including - line breaks. - o start with a slash, in which case it is treated as - a file that contains the private key. - o be "0", "false" or the empty string, in which case - the message will not be signed. This case will not - result in an error, even if dk_strict is set. - - - dk_canon = [OPTIONAL] - - This option sets the canonicalization method used when - signing a message. The DK draft currently supports two - methods: "simple" and "nofws". The option defaults to - "simple" when unset. - - - dk_strict = [OPTIONAL] - - This option defines how Exim behaves when signing a - message that should be signed fails for some reason. When - the expansion evaluates to either "1" or "true", Exim will - defer. Otherwise Exim will send the message unsigned. You - can and should use the $dk_domain and $dk_selector - expansion variables here. - - - dk_domain = [NOT RECOMMENDED] - - This option overrides DKs autodetection of the signing - domain. You should only use this option if you know what - you are doing. The result of the string expansion is also - put in $dk_domain. - - - - -2. Brightmail AntiSpam (BMI) suppport +Brightmail AntiSpam (BMI) support -------------------------------------------------------------- Brightmail AntiSpam is a commercial package. Please see @@ -293,14 +42,14 @@ These four steps are explained in more details below. 1) Adding support for BMI at compile time To compile with BMI support, you need to link Exim against - the Brighmail client SDK, consisting of a library + the Brightmail client SDK, consisting of a library (libbmiclient_single.so) and a header file (bmi_api.h). You'll also need to explicitly set a flag in the Makefile to include BMI support in the Exim binary. Both can be achieved with these lines in Local/Makefile: EXPERIMENTAL_BRIGHTMAIL=yes - CFLAGS=-DBRIGHTMAIL -I/path/to/the/dir/with/the/includefile + CFLAGS=-I/path/to/the/dir/with/the/includefile EXTRALIBS_EXIM=-L/path/to/the/dir/with/the/library -lbmiclient_single If you use other CFLAGS or EXTRALIBS_EXIM settings then @@ -543,139 +292,408 @@ These four steps are explained in more details below. -3. Sender Policy Framework (SPF) support +DCC Support -------------------------------------------------------------- +Distributed Checksum Clearinghouse; http://www.rhyolite.com/dcc/ + +*) Building exim + +In order to build exim with DCC support add + +EXPERIMENTAL_DCC=yes -To learn more about SPF, visit http://spf.pobox.com. This -document does not explain the SPF fundamentals, you should -read and understand the implications of deploying SPF on your -system before doing so. - -SPF support is added via the libspf2 library. Visit - - http://www.libspf2.org/ - -to obtain a copy, then compile and install it. By default, -this will put headers in /usr/local/include and the static -library in /usr/local/lib. - -To compile Exim with SPF support, set these additional flags in -Local/Makefile: - -EXPERIMENTAL_SPF=yes -CFLAGS=-DSPF -I/usr/local/include -EXTRALIBS_EXIM=-L/usr/local/lib -lspf2 - -This assumes that the libspf2 files are installed in -their default locations. - -You can now run SPF checks in incoming SMTP by using the "spf" -ACL condition in either the MAIL, RCPT or DATA ACLs. When -using it in the RCPT ACL, you can make the checks dependend on -the RCPT address (or domain), so you can check SPF records -only for certain target domains. This gives you the -possibility to opt-out certain customers that do not want -their mail to be subject to SPF checking. - -The spf condition takes a list of strings on its right-hand -side. These strings describe the outcome of the SPF check for -which the spf condition should succeed. Valid strings are: - - o pass The SPF check passed, the sending host - is positively verified by SPF. - o fail The SPF check failed, the sending host - is NOT allowed to send mail for the domain - in the envelope-from address. - o softfail The SPF check failed, but the queried - domain can't absolutely confirm that this - is a forgery. - o none The queried domain does not publish SPF - records. - o neutral The SPF check returned a "neutral" state. - This means the queried domain has published - a SPF record, but wants to allow outside - servers to send mail under its domain as well. - o err_perm This indicates a syntax error in the SPF - record of the queried domain. This should be - treated like "none". - o err_temp This indicates a temporary error during all - processing, including Exim's SPF processing. - You may defer messages when this occurs. - -You can prefix each string with an exclamation mark to invert -is meaning, for example "!fail" will match all results but -"fail". The string list is evaluated left-to-right, in a -short-circuit fashion. When a string matches the outcome of -the SPF check, the condition succeeds. If none of the listed -strings matches the outcome of the SPF check, the condition -fails. - -Here is a simple example to fail forgery attempts from domains -that publish SPF records: - -/* ----------------- -deny message = $sender_host_address is not allowed to send mail from $sender_address_domain - spf = fail ---------------------- */ - -You can also give special treatment to specific domains: - -/* ----------------- -deny message = AOL sender, but not from AOL-approved relay. - sender_domains = aol.com - spf = fail:neutral ---------------------- */ - -Explanation: AOL publishes SPF records, but is liberal and -still allows non-approved relays to send mail from aol.com. -This will result in a "neutral" state, while mail from genuine -AOL servers will result in "pass". The example above takes -this into account and treats "neutral" like "fail", but only -for aol.com. Please note that this violates the SPF draft. - -When the spf condition has run, it sets up several expansion -variables. - - $spf_header_comment - This contains a human-readable string describing the outcome - of the SPF check. You can add it to a custom header or use - it for logging purposes. - - $spf_received - This contains a complete SPF-Received: header that can be - added to the message. Please note that according to the SPF - draft, this header must be added at the top of the header - list. Please see section 10 on how you can do this. - - $spf_result - This contains the outcome of the SPF check in string form, - one of pass, fail, softfail, none, neutral, err_perm or - err_temp. - - $spf_smtp_comment - This contains a string that can be used in a SMTP response - to the calling party. Useful for "fail". - - - -4. SRS (Sender Rewriting Scheme) Support +to your Makefile. (Re-)build/install exim. exim -d should show +EXPERIMENTAL_DCC under "Support for". + + +*) Configuration + +In the main section of exim.cf add at least + dccifd_address = /usr/local/dcc/var/dccifd +or + dccifd_address = + +In the DATA ACL you can use the new condition + dcc = * + +After that "$dcc_header" contains the X-DCC-Header. + +Return values are: + fail for overall "R", "G" from dccifd + defer for overall "T" from dccifd + accept for overall "A", "S" from dccifd + +dcc = */defer_ok works as for spamd. + +The "$dcc_result" variable contains the overall result from DCC +answer. There will an X-DCC: header added to the mail. + +Usually you'll use + defer !dcc = * +to greylist with DCC. + +If you set, in the main section, + dcc_direct_add_header = true +then the dcc header will be added "in deep" and if the spool +file was already written it gets removed. This forces Exim to +write it again if needed. This helps to get the DCC Header +through to eg. SpamAssassin. + +If you want to pass even more headers in the middle of the +DATA stage you can set + $acl_m_dcc_add_header +to tell the DCC routines to add more information; eg, you might set +this to some results from ClamAV. Be careful. Header syntax is +not checked and is added "as is". + +In case you've troubles with sites sending the same queue items from several +hosts and fail to get through greylisting you can use +$acl_m_dcc_override_client_ip + +Setting $acl_m_dcc_override_client_ip to an IP address overrides the default +of $sender_host_address. eg. use the following ACL in DATA stage: + + warn set acl_m_dcc_override_client_ip = \ + ${lookup{$sender_helo_name}nwildlsearch{/etc/mail/multipleip_sites}{$value}{}} + condition = ${if def:acl_m_dcc_override_client_ip} + log_message = dbg: acl_m_dcc_override_client_ip set to \ + $acl_m_dcc_override_client_ip + +Then set something like +# cat /etc/mail/multipleip_sites +mout-xforward.gmx.net 82.165.159.12 +mout.gmx.net 212.227.15.16 + +Use a reasonable IP. eg. one the sending cluster actually uses. + + + +DSN extra information +--------------------- +If compiled with EXPERIMENTAL_DSN_INFO extra information will be added +to DSN fail messages ("bounces"), when available. The intent is to aid +tracing of specific failing messages, when presented with a "bounce" +complaint and needing to search logs. + + +The remote MTA IP address, with port number if nonstandard. +Example: + Remote-MTA: X-ip; [127.0.0.1]:587 +Rationale: + Several addresses may correspond to the (already available) + dns name for the remote MTA. + +The remote MTA connect-time greeting. +Example: + X-Remote-MTA-smtp-greeting: X-str; 220 the.local.host.name ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000 +Rationale: + This string sometimes presents the remote MTA's idea of its + own name, and sometimes identifies the MTA software. + +The remote MTA response to HELO or EHLO. +Example: + X-Remote-MTA-helo-response: X-str; 250-the.local.host.name Hello localhost [127.0.0.1] +Limitations: + Only the first line of a multiline response is recorded. +Rationale: + This string sometimes presents the remote MTA's view of + the peer IP connecting to it. + +The reporting MTA detailed diagnostic. +Example: + X-Exim-Diagnostic: X-str; SMTP error from remote mail server after RCPT TO:: 550 hard error +Rationale: + This string sometimes give extra information over the + existing (already available) Diagnostic-Code field. + + +Note that non-RFC-documented field names and data types are used. + + +Queuefile transport +------------------- +Queuefile is a pseudo transport which does not perform final delivery. +It simply copies the exim spool files out of the spool directory into +an external directory retaining the exim spool format. + +The spool files can then be processed by external processes and then +requeued into exim spool directories for final delivery. +However, note carefully the warnings in the main documentation on +qpool file formats. + +The motivation/inspiration for the transport is to allow external +processes to access email queued by exim and have access to all the +information which would not be available if the messages were delivered +to the process in the standard email formats. + +The mailscanner package is one of the processes that can take advantage +of this transport to filter email. + +The transport can be used in the same way as the other existing transports, +i.e by configuring a router to route mail to a transport configured with +the queuefile driver. + +The transport only takes one option: + +* directory - This is used to specify the directory messages should be +copied to. Expanded. + +The generic transport options (body_only, current_directory, disable_logging, +debug_print, delivery_date_add, envelope_to_add, event_action, group, +headers_add, headers_only, headers_remove, headers_rewrite, home_directory, +initgroups, max_parallel, message_size_limit, rcpt_include_affixes, +retry_use_local_part, return_path, return_path_add, shadow_condition, +shadow_transport, transport_filter, transport_filter_timeout, user) are +ignored. + +Sample configuration: + +(Router) + +scan: + driver = accept + transport = scan + +(Transport) + +scan: + driver = queuefile + directory = /var/spool/baruwa-scanner/input + + +In order to build exim with Queuefile transport support add or uncomment + +EXPERIMENTAL_QUEUEFILE=yes + +to your Local/Makefile. (Re-)build/install exim. exim -d should show +Experimental_QUEUEFILE in the line "Support for:". + + +ARC support +----------- +Specification: https://tools.ietf.org/html/draft-ietf-dmarc-arc-protocol-11 +Note that this is not an RFC yet, so may change. + +[RFC 8617 was published 2019/06. Draft 11 was 2018/01. A review of the +changes has not yet been done] + +ARC is intended to support the utility of SPF and DKIM in the presence of +intermediaries in the transmission path - forwarders and mailinglists - +by establishing a cryptographically-signed chain in headers. + +Normally one would only bother doing ARC-signing when functioning as +an intermediary. One might do verify for local destinations. + +ARC uses the notion of a "ADministrative Management Domain" (ADMD). +Described in RFC 5598 (section 2.3), this is essentially a set of +mail-handling systems that mail transits that are all under the control +of one organisation. A label should be chosen to identify the ADMD. +Messages should be ARC-verified on entry to the ADMD, and ARC-signed on exit +from it. + + +Building with ARC Support +-- +Enable using EXPERIMENTAL_ARC=yes in your Local/Makefile. +You must also have DKIM present (not disabled), and you very likely +want to have SPF enabled. + + +Verification +-- +An ACL condition is provided to perform the "verifier actions" detailed +in section 6 of the above specification. It may be called from the DATA ACL +and succeeds if the result matches any of a given list. +It also records the highest ARC instance number (the chain size) +and verification result for later use in creating an Authentication-Results: +standard header. + + verify = arc/ none:fail:pass + + add_header = :at_start:${authresults {}} + + Note that it would be wise to strip incoming messages of A-R headers + that claim to be from our own . Eg: + + remove_header = \N^(?i)Authentication-Results\s*::\s*example.org;\N + +There are four new variables: + + $arc_state One of pass, fail, none + $arc_state_reason (if fail, why) + $arc_domains colon-sep list of ARC chain domains, in chain order. + problematic elements may have empty list elements + $arc_oldest_pass lowest passing instance number of chain + +Example: + logwrite = oldest-p-ams: <${reduce {$lh_ARC-Authentication-Results:} \ + {} \ + {${if = {$arc_oldest_pass} \ + {${extract {i}{${extract {1}{;}{$item}}}}} \ + {$item} {$value}}} \ + }> + +Receive log lines for an ARC pass will be tagged "ARC". + + +Signing +-- +arc_sign = : : [ : ] +An option on the smtp transport, which constructs and prepends to the message +an ARC set of headers. The textually-first Authentication-Results: header +is used as a basis (you must have added one on entry to the ADMD). +Expanded as a whole; if unset, empty or forced-failure then no signing is done. +If it is set, all of the first three elements must be non-empty. + +The fourth element is optional, and if present consists of a comma-separated list +of options. The options implemented are + + timestamps Add a t= tag to the generated AMS and AS headers, with the + current time. + expire[=] Add an x= tag to the generated AMS header, with an expiry time. + If the value is an plain number it is used unchanged. + If it starts with a '+' then the following number is added + to the current time, as an offset in seconds. + If a value is not given it defaults to a one month offset. + +[As of writing, gmail insist that a t= tag on the AS is mandatory] + +Caveats: + * There must be an Authentication-Results header, presumably added by an ACL + while receiving the message, for the same ADMD, for arc_sign to succeed. + This requires careful coordination between inbound and outbound logic. + + Only one A-R header is taken account of. This is a limitation versus + the ARC spec (which says that all A-R headers from within the ADMD must + be used). + + * If passing a message to another system, such as a mailing-list manager + (MLM), between receipt and sending, be wary of manipulations to headers made + by the MLM. + + For instance, Mailman with REMOVE_DKIM_HEADERS==3 might improve + deliverability in a pre-ARC world, but that option also renames the + Authentication-Results header, which breaks signing. + + * Even if you use multiple DKIM keys for different domains, the ARC concept + should try to stick to one ADMD, so pick a primary domain and use that for + AR headers and outbound signing. + +Signing is not compatible with cutthrough delivery; any (before expansion) +value set for the option will result in cutthrough delivery not being +used via the transport in question. + + + +Dovecot authenticator via inet socket -------------------------------------------------------------- +If Dovecot is configured similar to :- + +service auth { +... +#SASL + inet_listener { + name = exim + port = 12345 + } +... +} + +then an Exim authenticator can be configured :- + + dovecot-plain: + driver = dovecot + public_name = PLAIN + server_socket = dovecot_server_name 12345 + server_tls = true + server_set_id = $auth1 + +If the server_socket does not start with a / it is taken as a hostname (or IP); +and a whitespace-separated port number must be given. + + + + +Logging protocol unusual states +--------------------------------------------------------------- +An extra log_selector, "protocol_detail" has been added in the default build. +The name may change in future, hence the Experimenal status. + +Currrently the only effect is to enable logging, under TLS, +of a TCP RST received directly after a QUIT (in server mode). + +Outlook is consistently doing this; not waiting for the SMTP response +to its QUIT, not properly closing the TLS session and not properly closing +the TCP connection. Previously this resulted is an error from SSL_write +being logged. + + + +Limits ESMTP extension +--------------------------------------------------------------- +Per https://datatracker.ietf.org/doc/html/draft-freed-smtp-limits-01 +(as of 2023/08/04, version -05 has been published. It does not seems +to be substantively different.) + +If compiled with EXPERIMENTAL_ESMTP_LIMITS=yes :- + +As a server, Exim will advertise, in the EHLO response, the limit for RCPT +commands set by the recipients_max main-section config option (if it is set), +and the limit for MAIL commands set by the smtp_accept_max_per_connection +option. + +Note that as of writing, smtp_accept_max_per_connection is expanded but +recipients_max is not. + +A new main-section option "limits_advertise_hosts" controls whether +the limits are advertised; the default for the option is "*". + +As a client, Exim will: + + - note an advertised MAILMAX; the lower of the value given and the + value from the transport connection_max_messages option is used. + + - note an advertised RCPTMAX; the lower of the + value given and the value from the transport max_rcpt option is used. + Parallisation of transactions is not done if due to a RCPTMAX, unlike + max_rcpt. + + - note an advertised RCPTDOMAINMAX, and behave as if the transport + multi_domains option was set to false. The value advertised is ignored. + +Values advertised are only noted for TLS connections and ones for which +the server does not advertise TLS support. + -Exiscan currently includes SRS support via Miles Wilton's -libsrs_alt library. The current version of the supported -library is 0.5. -In order to use SRS, you must get a copy of libsrs_alt from +XCLIENT proxy support +--------------------------------------------------------------- +Per https://www.postfix.org/XCLIENT_README.html -http://srs.mirtol.com/ +XCLIENT is an ESMTP extension supporting an inbound proxy. +The only client immplementation known is in Nginx +(https://nginx.org/en/docs/mail/ngx_mail_proxy_module.html) -Unpack the tarball, then refer to MTAs/README.EXIM -to proceed. You need to set +If compiled with EXPERIMENTAL_XCLIENT=yes :- -EXPERIMENTAL_SRS=yes +As a server, Exim will advertise XCLIENT support (conditional on a new option +"hosts_xclient") and service XCLIENT commands with parameters + ADDR + NAME + PORT + LOGIN + DESTADDR + DESTPORT +A fresh HELO/EHLO is required after a succesful XCLIENT, and the usual +values are derived from that (making the HELO and PROTO paramemters redundant). -in your Local/Makefile. +An XCLIENT command must give both ADDR and PORT parameters if no previous +XCLIENT has succeeded in the SMTP session. +After a success: + $proxy_session variable becomes "yes" + $proxy_local_address, $proxy_local_port have the proxy "inside" values + $proxy_external_address, $proxy_external_port have the proxy "outside" values + $sender_host_address, $sender_host_port have the remot client values -------------------------------------------------------------- End of file