X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/364e49ab87bf81774f12f8b0e21509eb51c88b71..cb570b5ea1ff234ae16b2c32a236ccd520a80f7a:/src/OS/Makefile-Base

diff --git a/src/OS/Makefile-Base b/src/OS/Makefile-Base
index 8209969f6..e0bdeecfd 100644
--- a/src/OS/Makefile-Base
+++ b/src/OS/Makefile-Base
@@ -7,6 +7,7 @@
 
 SHELL      = $(MAKE_SHELL)
 SCRIPTS    = ../scripts
+O          = ../OS
 EDITME     = ../Local/Makefile
 EXIMON_EDITME = ../Local/eximon.conf
 
@@ -32,9 +33,10 @@ FE       = $(FULLECHO)
 # up-to-date. Then the os-specific source files and the C configuration file
 # are set up, and finally it goes to the main Exim target.
 
-all:    $(EDITME) checklocalmake Makefile os.h os.c config.h version.h allexim
+all:       utils exim
+config:    $(EDITME) checklocalmake Makefile os.c config.h version.h
 
-checklocalmake:
+checklocalmake: 
 	@if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
 	  $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
 	  $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
@@ -75,12 +77,29 @@ Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
 
 # Build (link) the os.h file
 
-os.h:
+os.h:	$(SCRIPTS)/Configure-os.h \
+	$(O)/os.h-AIX		$(O)/os.h-BSDI	$(O)/os.h-cygwin \
+	$(O)/os.h-Darwin	$(O)/os.h-DGUX	$(O)/os.h-DragonFly \
+	$(O)/os.h-FreeBSD	$(O)/os.h-GNU	$(O)/os.h-GNUkFreeBSD \
+	$(O)/os.h-GNUkNetBSD	$(O)/os.h-HI-OSF \
+	$(O)/os.h-HI-UX		$(O)/os.h-HP-UX	$(O)/os.h-HP-UX-9 \
+	$(O)/os.h-IRIX		$(O)/os.h-IRIX6	$(O)/os.h-IRIX632 \
+	$(O)/os.h-IRIX65	$(O)/os.h-Linux	$(O)/os.h-mips \
+	$(O)/os.h-NetBSD	$(O)/os.h-NetBSD-a.out \
+	$(O)/os.h-OpenBSD	$(O)/os.h-OpenUNIX	$(O)/os.h-OSF1 \
+	$(O)/os.h-QNX		$(O)/os.h-SCO		$(O)/os.h-SCO_SV \
+	$(O)/os.h-SunOS4	$(O)/os.h-SunOS5	$(O)/os.h-SunOS5-hal \
+	$(O)/os.h-ULTRIX	$(O)/os.h-UNIX_SV \
+	$(O)/os.h-Unixware7	$(O)/os.h-USG
 	$(SHELL) $(SCRIPTS)/Configure-os.h
 
 # Build the os.c file
 
-os.c:   ../src/os.c
+os.c:   ../src/os.c \
+	$(SCRIPTS)/Configure-os.c \
+	$(O)/os.c-cygwin	$(O)/os.c-GNU	$(O)/os.c-HI-OSF \
+	$(O)/os.c-IRIX		$(O)/os.c-IRIX6	$(O)/os.c-IRIX632 \
+	$(O)/os.c-IRIX65	$(O)/os.c-Linux	$(O)/os.c-OSF1
 	$(SHELL) $(SCRIPTS)/Configure-os.c
 
 # Build the config.h file.
@@ -94,19 +113,16 @@ config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 # therefore always be run, even if the files exist. This shouldn't in fact be a
 # problem, but it does no harm. Other make programs will just ignore this.
 
-.PHONY: all allexim buildauths buildlookups buildpdkim buildrouters \
+.PHONY: all config utils \
+	buildauths buildlookups buildpdkim buildrouters \
         buildtransports checklocalmake clean
 
 
-# This is the real default target for all the various exim binaries and
-# scripts, once the configuring stuff is done.
-
-allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \
+utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
         exigrep eximstats exipick exiqgrep exiqsumm \
         transport-filter.pl convert4r3 convert4r4 \
         exim_checkaccess \
-        exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
-        exim
+        exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
 
 
 # Targets for special-purpose configuration header builders
@@ -116,7 +132,7 @@ buildconfig: buildconfig.c
 
 
 # Target for the exicyclog utility script
-exicyclog: Makefile config.h ../src/exicyclog.src
+exicyclog: config ../src/exicyclog.src
 	@rm -f exicyclog
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -141,7 +157,7 @@ exicyclog: Makefile config.h ../src/exicyclog.src
 	@echo ">>> exicyclog script built"
 
 # Target for the exinext utility script
-exinext: Makefile config.h ../src/exinext.src
+exinext: config ../src/exinext.src
 	@rm -f exinext
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -156,7 +172,7 @@ exinext: Makefile config.h ../src/exinext.src
 	@echo ">>> exinext script built"
 
 # Target for the exiwhat utility script
-exiwhat: Makefile config.h ../src/exiwhat.src
+exiwhat: config ../src/exiwhat.src
 	@rm -f exiwhat
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -177,7 +193,7 @@ exiwhat: Makefile config.h ../src/exiwhat.src
 	@echo ">>> exiwhat script built"
 
 # Target for the exim_checkaccess utility script
-exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
+exim_checkaccess: config ../src/exim_checkaccess.src
 	@rm -f exim_checkaccess
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -193,7 +209,7 @@ exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
 	@echo ">>> exim_checkaccess script built"; echo ""
 
 # Target for the Exim monitor start-up script
-eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
+eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
           ../Local/eximon.conf
 	@rm -f eximon
 	$(SHELL) $(SCRIPTS)/Configure-eximon
@@ -297,14 +313,21 @@ convert4r4: Makefile ../src/convert4r4.src
 
 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 OBJ_WITH_OLD_DEMIME = demime.o
-OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o dmarc.o
+OBJ_EXPERIMENTAL = bmi_spam.o \
+				dane.o \
+				dcc.o \
+				dmarc.o \
+				imap_utf7.o \
+				spf.o \
+				srs.o \
+				utf8.o
 
 # Targets for final binaries; the main one has a build number which is
 # updated each time. We don't bother with that for the auxiliaries.
 
 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
 
-OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
+OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
         filtertest.o globals.o dkim.o \
         header.o host.o ip.o log.o lss.o match.o moan.o \
@@ -312,6 +335,7 @@ OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
+        environment.o \
         $(OBJ_LOOKUPS) \
         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
@@ -395,7 +419,7 @@ exim_dbmbuild: exim_dbmbuild.o
 
 # The utility for locking a mailbox while messing around with it
 
-exim_lock: exim_lock.c
+exim_lock: exim_lock.c os.h
 	@echo "$(CC) exim_lock.c"
 	$(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 	@echo "$(LNCC) -o exim_lock"
@@ -447,8 +471,28 @@ eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
 # in one. This list is overkill, but it doesn't really take much time to
 # rebuild Exim on a modern computer.
 
-HDRS  =    config.h    dbfunctions.h    dbstuff.h    exim.h    functions.h    globals.h    local_scan.h    macros.h    mytypes.h    structs.h
-PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h
+HDRS  =	config.h \
+	dbfunctions.h \
+	dbstuff.h \
+	exim.h \
+	functions.h \
+	globals.h \
+	local_scan.h \
+	macros.h \
+	mytypes.h \
+	structs.h \
+	os.h
+PHDRS = ../config.h \
+	../dbfunctions.h \
+	../dbstuff.h \
+	../exim.h \
+	../functions.h \
+	../globals.h \
+	../local_scan.h \
+	../macros.h \
+	../mytypes.h \
+	../structs.h \
+	../os.h
 
 .SUFFIXES: .o .c
 .c.o:;  @echo "$(CC) $*.c"
@@ -530,13 +574,14 @@ util-os.o:       $(HDRS) os.c
 # The local scan module depends only on its own special header, and is compiled
 # from a source whose location is set by configuration.
 
-local_scan.o:    Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE)
+local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 	@echo "$(CC) local_scan.c"
 	$(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 
 # Dependencies for the "ordinary" exim modules
 
 acl.o:           $(HDRS) acl.c
+base64.o:        $(HDRS) mime.h base64.c
 child.o:         $(HDRS) child.c
 crypt16.o:       $(HDRS) crypt16.c
 daemon.o:        $(HDRS) daemon.c
@@ -548,6 +593,7 @@ dns.o:           $(HDRS) dns.c
 enq.o:           $(HDRS) enq.c
 exim.o:          $(HDRS) exim.c
 expand.o:        $(HDRS) expand.c
+environment.o:   $(HDRS) environment.c
 filter.o:        $(HDRS) filter.c
 filtertest.o:    $(HDRS) filtertest.c
 globals.o:       $(HDRS) globals.c
@@ -577,17 +623,19 @@ spool_out.o:     $(HDRS) spool_out.c
 std-crypto.o:    $(HDRS) std-crypto.c
 store.o:         $(HDRS) store.c
 string.o:        $(HDRS) string.c
-tls.o:           $(HDRS) tls.c tls-gnu.c tls-openssl.c
+tls.o:           $(HDRS) tls.c setenv.c \
+		 tls-gnu.c tlscert-gnu.c \
+		 tls-openssl.c tlscert-openssl.c
 tod.o:           $(HDRS) tod.c
 transport.o:     $(HDRS) transport.c
 tree.o:          $(HDRS) tree.c
 verify.o:        $(HDRS) verify.c
-dkim.o:          $(HDRS) dkim.c
+dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
 
 # Dependencies for WITH_CONTENT_SCAN modules
 
 malware.o:       $(HDRS) malware.c
-mime.o:          $(HDRS) mime.c
+mime.o:          $(HDRS) mime.h mime.c
 regex.o:         $(HDRS) regex.c
 spam.o:          $(HDRS) spam.c
 spool_mbox.o:    $(HDRS) spool_mbox.c
@@ -595,16 +643,19 @@ spool_mbox.o:    $(HDRS) spool_mbox.c
 
 # Dependencies for WITH_OLD_DEMIME modules
 
-demime.o:        $(HDRS) demime.c
+demime.o:       $(HDRS) demime.c
 
 
 # Dependencies for EXPERIMENTAL_* modules
 
-bmi_spam.o:      $(HDRS) bmi_spam.c
-spf.o:           $(HDRS) spf.h spf.c
-srs.o:           $(HDRS) srs.h srs.c
-dcc.o:           $(HDRS) dcc.h dcc.c
-dmarc.o:         $(HDRS) dmarc.h dmarc.c
+bmi_spam.o:	$(HDRS) bmi_spam.c
+dane.o:		$(HDRS) dane.c dane-gnu.c dane-openssl.c
+dcc.o:		$(HDRS) dcc.h dcc.c
+dmarc.o:	$(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
+imap_utf7.o:	$(HDRS) imap_utf7.c
+spf.o:		$(HDRS) spf.h spf.c
+srs.o:		$(HDRS) srs.h srs.c
+utf8.o:		$(HDRS) utf8.c
 
 # The module containing tables of available lookups, routers, auths, and
 # transports must be rebuilt if any of them are. However, because the makefiles
@@ -648,7 +699,7 @@ $(MONBIN): $(HDRS)
 
 # The lookups library.
 
-buildlookups:
+buildlookups: config
 	 @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
@@ -657,7 +708,7 @@ buildlookups:
 
 # The routers library.
 
-buildrouters:
+buildrouters: config
 	 @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
@@ -665,7 +716,7 @@ buildrouters:
 
 # The transports library.
 
-buildtransports:
+buildtransports: config
 	 @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
@@ -673,7 +724,7 @@ buildtransports:
 
 # The library of authorization modules
 
-buildauths:
+buildauths: config
 	 @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
@@ -682,7 +733,7 @@ buildauths:
 # The PDKIM library
 
 buildpdkim: pdkim/pdkim.a
-pdkim/pdkim.a: config.h
+pdkim/pdkim.a: config
 	 @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
@@ -715,11 +766,11 @@ sa-os.o:         $(HDRS) os.c
 # These are the test targets themselves
 
 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
-	       string.o tod.o version.o
+	       string.o tod.o version.o utf8.o
 	$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 	$(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 	  dummies.o sa-globals.o sa-os.o store.o string.o \
-	  tod.o version.o $(LIBS) $(DBMLIB)
+	  tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
 	rm -f dbfn.o
 
 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
@@ -733,23 +784,24 @@ test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 	  tod.o tree.o $(LIBS) $(LIBRESOLV)
 	rm -f child.o dummies.o host.o dns.o
 
-test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o
+test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
 	$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 	$(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
-	  sa-globals.o store.o string.o tod.o $(LIBS)
+	  sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 	rm -f os.o
 
 test_parse:  config.h parse.c dummies.o sa-globals.o \
-	     store.o string.o tod.o version.o
+	     store.o string.o tod.o version.o utf8.o
 	$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 	$(LNCC) -o test_parse $(LFLAGS) parse.o \
-	  dummies.o sa-globals.o store.o string.o tod.o version.o
+	  dummies.o sa-globals.o store.o string.o tod.o version.o \
+	  utf8.o $(LDFLAGS)
 	rm -f parse.o
 
-test_string: config.h string.c dummies.o sa-globals.o store.o tod.o
+test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
 	$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 	$(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
-	  dummies.o sa-globals.o store.o tod.o $(LIBS)
+	  dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 	rm -f string.o
 
 # End