X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/1cce3af8c29cfa691a3e28c79227f358e5a7b3b9..6c512171a8449f14cc284e13aabc0153d9977c43:/doc/doc-txt/ChangeLog diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index d69e9eafb..cd802708e 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -1,8 +1,819 @@ -$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.340 2006/04/18 11:13:19 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.513 2007/06/18 13:57:49 ph10 Exp $ Change log file for Exim from version 4.21 ------------------------------------------- +Exim version 4.68 +----------------- + +PH/01 Another patch from the Sieve maintainer. + +PH/02 When an IPv6 address is converted to a string for single-key lookup + in an address list (e.g. for an item such as "net24-dbm;/net/works"), + dots are used instead of colons so that keys in lsearch files need not + contain colons. This was done some time before quoting was made available + in lsearch files. However, iplsearch files do require colons in IPv6 keys + (notated using the quote facility) so as to distinguish them from IPv4 + keys. This meant that lookups for IP addresses in host lists did not work + for iplsearch lookups. + + This has been fixed by arranging for IPv6 addresses to be expressed with + colons if the lookup type is iplsearch. This is not incompatible, because + previously such lookups could never work. + + The situation is now rather anomolous, since one *can* have colons in + ordinary lsearch keys. However, making the change in all cases is + incompatible and would probably break a number of configurations. + +TK/01 Change PRVS address formatting scheme to reflect latests BATV draft + version. + +MH/01 The "spam" ACL condition code contained a sscanf() call with a %s + conversion specification without a maximum field width, thereby enabling + a rogue spamd server to cause a buffer overflow. While nobody in their + right mind would setup Exim to query an untrusted spamd server, an + attacker that gains access to a server running spamd could potentially + exploit this vulnerability to run arbitrary code as the Exim user. + +TK/02 Bugzilla 502: Apply patch to make the SPF-Received: header use + $primary_hostname instead of what libspf2 thinks the hosts name is. + +MH/02 The dsearch lookup now uses lstat(2) instead of stat(2) to look for + a directory entry by the name of the lookup key. Previously, if a + symlink pointed to a non-existing file or a file in a directory that + Exim lacked permissions to read, a lookup for a key matching that + symlink would fail. Now it is enough that a matching directory entry + exists, symlink or not. (Bugzilla 503.) + +PH/03 The body_linecount and body_zerocount variables are now exported in the + local_scan API. + +PH/04 Added the $dnslist_matched variable. + +PH/05 Unset $tls_cipher and $tls_peerdn before making a connection as a client. + This means they are set thereafter only if the connection becomes + encrypted. + +PH/06 Added the client_condition to authenticators so that some can be skipped + by clients under certain conditions. + + +Exim version 4.67 +----------------- + +MH/01 Fix for bug #448, segfault in Dovecot authenticator when interface_address + is unset (happens when testing with -bh and -oMi isn't used). Thanks to + Jan Srzednicki. + +PH/01 Added a new log selector smtp_no_mail, to log SMTP sessions that do not + issue a MAIL command. + +PH/02 In an ACL statement such as + + deny dnslists = X!=127.0.0.2 : X=127.0.0.2 + + if a client was not listed at all, or was listed with a value other than + 127.0.0.2, in the X list, but was listed with 127.0.0.2 in the Y list, + the condition was not true (as it should be), so access was not denied. + The bug was that the ! inversion was incorrectly passed on to the second + item. This has been fixed. + +PH/03 Added additional dnslists conditions == and =& which are different from + = and & when the dns lookup returns more than one IP address. + +PH/04 Added gnutls_require_{kx,mac,protocols} to give more control over the + cipher suites used by GnuTLS. These options are ignored by OpenSSL. + +PH/05 After discussion on the list, added a compile time option ENABLE_DISABLE_ + FSYNC, which compiles an option called disable_fsync that allows for + bypassing fsync(). The documentation is heavily laced with warnings. + +SC/01 Updated eximstats to collate all SpamAssassin rejects into one bucket. + +PH/06 Some tidies to the infrastructure of the Test Suite that is concerned + with the auxiliary C programs that it uses: (1) Arrange for BIND_8_COMPAT + to be defined when compiling on OSX (Darwin); (2) Tidies to the Makefile, + including adding "make clean"; (3) Added -fPIC when compiling the test + dynamically loaded module, to get rid of a warning. + +MH/02 Fix for bug #451, causing paniclog entries to be written if a bounce + message fails, move_frozen_messages = true and ignore_bounce_errors_after + = 0s. The bug is otherwise harmless. + +PH/07 There was a bug in the dovecot authenticator such that the value of + $auth1 could be overwritten, and so not correctly preserved, after a + successful authentication. This usually meant that the value preserved by + the server_setid option was incorrect. + +PH/08 Added $smtp_count_at_connection_start, deliberately with a long name. + +PH/09 Installed PCRE release 7.0. + +PH/10 The acl_not_smtp_start ACL was, contrary to the documentation, not being + run for batched SMTP input. It is now run at the start of every message + in the batch. While fixing this I discovered that the process information + (output by running exiwhat) was not always getting set for -bs and -bS + input. This is fixed, and it now also says "batched" for BSMTP. + +PH/11 Added control=no_pipelining. + +PH/12 Added $sending_ip_address and $sending_port (mostly Magnus Holmgren's + patch, slightly modified), and move the expansion of helo_data till after + the connection is made in the smtp transport (so it can use these + values). + +PH/13 Added ${rfc2047d: to decoded RFC 2047 strings. + +PH/14 Added log_selector = +pid. + +PH/15 Flush SMTP output before delaying, unless control=no_delay_flush is set. + +PH/16 Add ${if forany and ${if forall. + +PH/17 Added dsn_from option to vary the From: line in DSNs. + +PH/18 Flush SMTP output before performing a callout, unless control = + no_callout_flush is set. + +PH/19 Change 4.64/PH/36 introduced a bug: when address_retry_include_sender + was true (the default) a successful delivery failed to delete the retry + item, thus causing premature timeout of the address. The bug is now + fixed. + +PH/20 Added hosts_avoid_pipelining to the smtp transport. + +PH/21 Long custom messages for fakedefer and fakereject are now split up + into multiline reponses in the same way that messages for "deny" and + other ACL rejections are. + +PH/22 Applied Jori Hamalainen's speed-up changes and typo fixes to exigrep, + with slight modification. + +PH/23 Applied sieve patches from the maintainer "tracking the latest notify + draft, changing the syntax and factoring some duplicate code". + +PH/24 When the log selector "outgoing_port" was set, the port was shown as -1 + for deliveries of the second and subsequent messages over the same SMTP + connection. + +PH/25 Applied Magnus Holmgren's patch for ${addresses, ${map, ${filter, and + ${reduce, with only minor "tidies". + +SC/02 Applied Daniel Tiefnig's patch to improve the '($parent) =' pattern match. + +PH/26 Added a "continue" ACL modifier that does nothing, for the benefit of its + expansion side effects. + +PH/27 When a message times out after an over-quota error from an Exim-imposed + quota, the bounce message says "mailbox is full". This message was not + being given when it was a system quota that was exceeded. It now should + be the same. + +MH/03 Made $recipients available in local_scan(). local_scan() already has + better access to the recipient list through recipients_list[], but + $recipients can be useful in postmaster-provided expansion strings. + +PH/28 The $smtp_command and $smtp_command_argument variables were not correct + in the case of a MAIL command with additional options following the + address, for example: MAIL FROM: SIZE=1234. The option settings + were accidentally chopped off. + +PH/29 SMTP synchronization checks are implemented when a command is read - + there is a check that no more input is waiting when there shouldn't be + any. However, for some commands, a delay in an ACL can mean that it is + some time before the response is written. In this time, more input might + arrive, invalidly. So now there are extra checks after an ACL has run for + HELO/EHLO and after the predata ACL, and likewise for MAIL and RCPT when + pipelining has not been advertised. + +PH/30 MH's patch to allow iscntrl() characters to be list separators. + +PH/31 Unlike :fail:, a custom message specified with :defer: was not being + returned in the SMTP response when smtp_return_error_details was false. + This has been fixed. + +PH/32 Change the Dovecot authenticator to use read() and write() on the socket + instead of the C I/O that was originally supplied, because problems were + reported on Solaris. + +PH/33 Compile failed with OpenSSL 0.9.8e. This was due to a coding error in + Exim which did not show up earlier: it was assuming that a call to + SSL_CTX_set_info_callback() might give an error value. In fact, there is + no error. In previous releases of OpenSSL, SSL_CTX_set_info_callback() + was a macro that became an assignment, so it seemed to work. This has + changed to a proper function call with a void return, hence the compile + error. Exim's code has been fixed. + +PH/34 Change HDA_SIZE in oracle.c from 256 to 512. This is needed for 64-bit + cpus. + +PH/35 Applied a patch from the Sieve maintainer which fixes a bug in "notify". + +PH/36 Applied John Jetmore's patch to add -v functionality to exigrep. + +PH/37 If a message is not accepted after it has had an id assigned (e.g. + because it turns out to be too big or there is a timeout) there is no + "Completed" line in the log. When some messages of this type were + selected by exigrep, they were listed as "not completed". Others were + picked up by some special patterns. I have improved the selection + criteria to be more general. + +PH/38 The host_find_failed option in the manualroute router can now be set + to "ignore", to completely ignore a host whose IP address cannot be + found. If all hosts are ignored, the behaviour is controlled by the new + host_all_ignored option. + +PH/39 In a list of hosts for manualroute, if one item (either because of multi- + homing or because of multiple MX records with /mx) generated more than + one IP address, and the following item turned out to be the local host, + all the secondary addresses of the first item were incorrectly removed + from the list, along with the local host and any following hosts (which + is what is supposed to happen). + +PH/40 When Exim receives a message, it writes the login name, uid, and gid of + whoever called Exim into the -H file. In the case of the daemon it was + behaving confusingly. When first started, it used values for whoever + started the daemon, but after a SIGHUP it used the Exim user (because it + calls itself on a restart). I have changed the code so that it now always + uses the Exim user. + +PH/41 (Following a suggestion from Tony Finch) If all the RCPT commands in a + message are rejected with the same error (e.g. no authentication or bad + sender address), and a DATA command is nevertheless sent (as can happen + with PIPELINING or a stupid MUA), the error message that was given to the + RCPT commands is included in the rejection of the DATA command. This is + intended to be helpful for MUAs that show only the final error to their + users. + +PH/42 Another patch from the Sieve maintainer. + +SC/02 Eximstats - Differentiate between permanent and temporary rejects. + Eximstats - Fixed some broken HTML links and added missing column headers + (Jez Hancock). + Eximstats - Fixed Grand Total Summary Domains, Edomains, and Email + columns for Rejects, Temp Rejects, Ham, and Spam rows. + +SC/03 Eximstats - V1.58 Fix to get <> and blackhole to show in edomain tables. + +PH/43 Yet another patch from the Sieve maintainer. + +PH/44 I found a way to check for a TCP/IP connection going away before sending + the response to the final '.' that terminates a message, but only in the + case where the client has not sent further data following the '.' + (unfortunately, this is allowed). However, in many cases there won't be + any further data because there won't be any more messages to send. A call + to select() can be used: if it shows that the input is "ready", there is + either input waiting, or the socket has been closed. An attempt to read + the next input character can distinguish the two cases. Previously, Exim + would have sent an OK response which the client would never have see. + This could lead to message repetition. This fix should cure that, at + least in a lot of common cases. + +PH/45 Do not advertise STARTTLS in response to HELP unless it would be + advertised in response to EHLO. + + +Exim version 4.66 +----------------- + +PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one + fixed by 4.65/MH/01 (is this a record?) are fixed: + + (i) An empty string was always treated as zero by the numeric comparison + operators. This behaviour has been restored. + + (ii) It is documented that the numeric comparison operators always treat + their arguments as decimal numbers. This was broken in that numbers + starting with 0 were being interpreted as octal. + + While fixing these problems I realized that there was another issue that + hadn't been noticed. Values of message_size_limit (both the global option + and the transport option) were treated as octal if they started with 0. + The documentation was vague. These values are now always treated as + decimal, and I will make that clear in the documentation. + + +Exim version 4.65 +----------------- + +TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with + Linux large file support (_FILE_OFFSET_BITS=64) on older glibc + versions. (#438) + +MH/01 Don't check that the operands of numeric comparison operators are + integers when their expansion is in "skipping" mode (fixes bug + introduced by 4.64-PH/07). + +PH/01 If a system filter or a router generates more than SHRT_MAX (32767) + child addresses, Exim now panics and dies. Previously, because the count + is held in a short int, deliveries were likely to be lost. As such a + large number of recipients for a single message is ridiculous + (performance will be very, very poor), I have chosen to impose a limit + rather than extend the field. + + +Exim version 4.64 +----------------- + +TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a + leftover -K file (the existence of which was triggered by #402). + While we were at it, introduced process PID as part of the -K + filename. This should rule out race conditions when creating + these files. + +TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing + processing considerably. Previous code took too long for large mails, + triggering a timeout which in turn triggers #401. + +TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used + in the DK code in transports.c. sendfile() is not really portable, + hence the _LINUX specificness. + +TF/01 In the add_headers option to the mail command in an Exim filter, + there was a bug that Exim would claim a syntax error in any + header after the first one which had an odd number of characters + in the field name. + +PH/01 If a server that rejects MAIL FROM:<> was the target of a sender + callout verification, Exim cached a "reject" for the entire domain. This + is correct for most verifications, but it is not correct for a recipient + verification with use_sender or use_postmaster set, because in that case + the callout does not use MAIL FROM:<>. Exim now distinguishes the special + case of MAIL FROM:<> rejection from other early rejections (e.g. + rejection of HELO). When verifying a recipient using a non-null MAIL + address, the cache is ignored if it shows MAIL FROM:<> rejection. + Whatever the result of the callout, the value of the domain cache is + left unchanged (for any other kind of callout, getting as far as trying + RCPT means that the domain itself is ok). + +PH/02 Tidied a number of unused variable and signed/unsigned warnings that + gcc 4.1.1 threw up. + +PH/03 On Solaris, an unexpectedly close socket (dropped connection) can + manifest itself as EPIPE rather than ECONNECT. When tidying away a + session, the daemon ignores ECONNECT errors and logs others; it now + ignores EPIPE as well. + +PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c + (quoted-printable decoding). + +PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and + later the small subsequent patch to fix an introduced bug. + +PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer. + +PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}. + +PH/08 An error is now given if message_size_limit is specified negative. + +PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables + to be given (somewhat) arbitrary names. + +JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced + in 4.64-PH/09. + +JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions, + miscellaneous code fixes + +PH/10 Added the log_reject_target ACL modifier to specify where to log + rejections. + +PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_ + hostname. This is wrong, because it relates to the incoming message (and + probably the interface on which it is arriving) and not to the outgoing + callout (which could be using a different interface). This has been + changed to use the value of the helo_data option from the smtp transport + instead - this is what is used when a message is actually being sent. If + there is no remote transport (possible with a router that sets up host + addresses), $smtp_active_hostname is used. + +PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various + tweaks were necessary in order to get it to work (see also 21 below): + (a) The code assumed that strncpy() returns a negative number on buffer + overflow, which isn't the case. Replaced with Exim's string_format() + function. + (b) There were several signed/unsigned issues. I just did the minimum + hacking in of casts. There is scope for a larger refactoring. + (c) The code used strcasecmp() which is not a standard C function. + Replaced with Exim's strcmpic() function. + (d) The code set only $1; it now sets $auth1 as well. + (e) A simple test gave the error "authentication client didn't specify + service in request". It would seem that Dovecot has changed its + interface. Fortunately there's a specification; I followed it and + changed what the client sends and it appears to be working now. + +PH/13 Added $message_headers_raw to provide the headers without RFC 2047 + decoding. + +PH/14 Corrected misleading output from -bv when -v was also used. Suppose the + address A is aliased to B and C, where B exists and C does not. Without + -v the output is "A verified" because verification stops after a + successful redirection if more than one address is generated. However, + with -v the child addresses are also verified. Exim was outputting "A + failed to verify" and then showing the successful verification for C, + with its parentage. It now outputs "B failed to verify", showing B's + parentage before showing the successful verification of C. + +PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to + look up a TXT record in a specific list after matching in a combined + list. + +PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and + RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when + they consult the DNS. I had assumed they would set it the way they + wanted; and indeed my experiments on Linux seem to show that in some + cases they do (I could influence IPv6 lookups but not IPv4 lookups). + To be on the safe side, however, I have now made the interface to + host_find_byname() similar to host_find_bydns(), with an argument + containing the DNS resolver options. The host_find_byname() function now + sets these options at its start, just as host_find_bydns() does. The smtp + transport options dns_qualify_single and dns_search_parents are passed to + host_find_byname() when gethostbyname=TRUE in this transport. Other uses + of host_find_byname() use the default settings of RES_DEFNAMES + (qualify_single) but not RES_DNSRCH (search_parents). + +PH/17 Applied (a modified version of) Nico Erfurth's patch to make + spool_read_header() do less string testing, by means of a preliminary + switch on the second character of optional "-foo" lines. (This is + overdue, caused by the large number of possibilities that now exist. + Originally there were few.) While I was there, I also converted the + str(n)cmp tests so they don't re-test the leading "-" and the first + character, in the hope this might squeeze out yet more improvement. + +PH/18 Two problems with "group" syntax in header lines when verifying: (1) The + flag allowing group syntax was set by the header_syntax check but not + turned off, possible causing trouble later; (2) The flag was not being + set at all for the header_verify test, causing "group"-style headers to + be rejected. I have now set it in this case, and also caused header_ + verify to ignore an empty address taken from a group. While doing this, I + came across some other cases where the code for allowing group syntax + while scanning a header line wasn't quite right (mostly, not resetting + the flag correctly in the right place). These bugs could have caused + trouble for malformed header lines. I hope it is now all correct. + +PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called + with the "reply" argument non-NULL. The code, however (which originally + came from elsewhere) had *some* tests for NULL when it wrote to *reply, + but it didn't always do it. This confused somebody who was copying the + code for some other use. I have removed all the tests. + +PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a + feature that was used to support insecure browsers during the U.S. crypto + embargo. It requires special client support, and Exim is probably the + only MTA that supported it -- and would never use it because real RSA is + always available. This code has been removed, because it had the bad + effect of slowing Exim down by computing (never used) parameters for the + RSA_EXPORT functionality. + +PH/21 On the advice of Timo Sirainen, added a check to the dovecot + authenticator to fail if there's a tab character in the incoming data + (there should never be unless someone is messing about, as it's supposed + to be base64-encoded). Also added, on Timo's advice, the "secured" option + if the connection is using TLS or if the remote IP is the same as the + local IP, and the "valid-client-cert option" if a client certificate has + been verified. + +PH/22 As suggested by Dennis Davis, added a server_condition option to *all* + authenticators. This can be used for authorization after authentication + succeeds. (In the case of plaintext, it servers for both authentication + and authorization.) + +PH/23 Testing for tls_required and lost_connection in a retry rule didn't work + if any retry times were supplied. + +PH/24 Exim crashed if verify=helo was activated during an incoming -bs + connection, where there is no client IP address to check. In this + situation, the verify now always succeeds. + +PH/25 Applied John Jetmore's -Mset patch. + +PH/26 Added -bem to be like -Mset, but loading a message from a file. + +PH/27 In a string expansion for a processed (not raw) header when multiple + headers of the same name were present, leading whitespace was being + removed from all of them, but trailing whitespace was being removed only + from the last one. Now trailing whitespace is removed from each header + before concatenation. Completely empty headers in a concatenation (as + before) are ignored. + +PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John + Jetmore). It would have mis-read ACL variables from pre-4.61 spool files. + +PH/29 [Removed. This was a change that I later backed out, and forgot to + correct the ChangeLog entry (that I had efficiently created) before + committing the later change.] + +PH/30 Exim was sometimes attempting to deliver messages that had suffered + address errors (4xx response to RCPT) over the same connection as other + messages routed to the same hosts. Such deliveries are always "forced", + so retry times are not inspected. This resulted in far too many retries + for the affected addresses. The effect occurred only when there were more + hosts than the hosts_max_try setting in the smtp transport when it had + the 4xx errors. Those hosts that it had tried were not added to the list + of hosts for which the message was waiting, so if all were tried, there + was no problem. Two fixes have been applied: + + (i) If there are any address or message errors in an SMTP delivery, none + of the hosts (tried or untried) are now added to the list of hosts + for which the message is waiting, so the message should not be a + candidate for sending over the same connection that was used for a + successful delivery of some other message. This seems entirely + reasonable: after all the message is NOT "waiting for some host". + This is so "obvious" that I'm not sure why it wasn't done + previously. Hope I haven't missed anything, but it can't do any + harm, as the worst effect is to miss an optimization. + + (ii) If, despite (i), such a delivery is accidentally attempted, the + routing retry time is respected, so at least it doesn't keep + hammering the server. + +PH/31 Installed Andrew Findlay's patch to close the writing end of the socket + in ${readsocket because some servers need this prod. + +PH/32 Added some extra debug output when updating a wait-xxx database. + +PH/33 The hint "could be header name not terminated by colon", which has been + given for certain expansion errors for a long time, was not being given + for the ${if def:h_colon_omitted{... case. + +PH/34 The spec says: "With one important exception, whenever a domain list is + being scanned, $domain contains the subject domain." There was at least + one case where this was not true. + +PH/35 The error "getsockname() failed: connection reset by peer" was being + written to the panic log as well as the main log, but it isn't really + panic-worthy as it just means the connection died rather early on. I have + removed the panic log writing for the ECONNRESET error when getsockname() + fails. + +PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue + runs only) independently of the message's sender address. This meant + that, if the 4xx error was in fact related to the sender, a different + message to the same recipient with a different sender could confuse + things. In particualar, this can happen when sending to a greylisting + server, but other circumstances could also provoke similar problems. + I have changed the default so that the retry time for these errors is now + based a combination of the sender and recipient addresses. This change + can be overridden by setting address_retry_include_sender=false in the + smtp transport. + +PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the + remote server are returned as part of bounce messages. This was not + happening for LMTP over a pipe (the lmtp transport), but now it is the + same for both kinds of LMTP. + +PH/38 Despite being documented as not happening, Exim was rewriting addresses + in header lines that were in fact CNAMEs. This is no longer the case. + +PH/39 If -R or -S was given with -q