X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/059ec3d9952740285fb1ebf47961b8aca2eb1b4a..a5c60e3c951f141cfd38ac1d05eea15743206c9a:/src/src/parse.c diff --git a/src/src/parse.c b/src/src/parse.c index e42e0c8a8..9e531200c 100644 --- a/src/src/parse.c +++ b/src/src/parse.c @@ -1,10 +1,8 @@ -/* $Cambridge: exim/src/src/parse.c,v 1.1 2004/10/07 10:39:01 ph10 Exp $ */ - /************************************************* * Exim - an Internet mail transport agent * *************************************************/ -/* Copyright (c) University of Cambridge 1995 - 2004 */ +/* Copyright (c) University of Cambridge 1995 - 2018 */ /* See the file NOTICE for conditions of use and distribution. */ /* Functions for parsing addresses */ @@ -189,7 +187,7 @@ The start of the last potential comment position is remembered to make it possible to ignore comments at the end of compound items. Argument: current character pointer -Regurns: new character pointer +Returns: new character pointer */ static uschar * @@ -243,18 +241,17 @@ s = skip_comment(s); any character except [ ] \, including linear white space, and may contain quoted characters. However, RFC 821 restricts literals to being dot-separated 3-digit numbers, and we make the obvious extension for IPv6. Go for a sequence -of digits and dots (hex digits and colons for IPv6) here; later this will be -checked for being a syntactically valid IP address if it ever gets to a router. +of digits, dots, hex digits, and colons here; later this will be checked for +being a syntactically valid IP address if it ever gets to a router. -If IPv6 is supported, allow both the formal form, with IPV6: at the start, and -the informal form without it, and accept IPV4: as well, 'cause someone will use -it sooner or later. */ +Allow both the formal IPv6 form, with IPV6: at the start, and the informal form +without it, and accept IPV4: as well, 'cause someone will use it sooner or +later. */ if (*s == '[') { *t++ = *s++; - #if HAVE_IPV6 if (strncmpic(s, US"IPv6:", 5) == 0 || strncmpic(s, US"IPv4:", 5) == 0) { memcpy(t, s, 5); @@ -263,10 +260,6 @@ if (*s == '[') } while (*s == '.' || *s == ':' || isxdigit(*s)) *t++ = *s++; - #else - while (*s == '.' || isdigit(*s)) *t++ = *s++; - #endif - if (*s == ']') *t++ = *s++; else { *errorptr = US"malformed domain literal"; @@ -428,10 +421,10 @@ for (;;) if (*s == '\"') { *t++ = '\"'; - while ((c = *(++s)) != 0 && c != '\"') + while ((c = *++s) && c != '\"') { *t++ = c; - if (c == '\\' && s[1] != 0) *t++ = *(++s); + if (c == '\\' && s[1]) *t++ = *++s; } if (c == '\"') { @@ -450,7 +443,7 @@ for (;;) else while (!mac_iscntrl_or_special(*s) || *s == '\\') { c = *t++ = *s++; - if (c == '\\' && *s != 0) *t++ = *s++; + if (c == '\\' && *s) *t++ = *s++; } /* Terminate the word and skip subsequent comment */ @@ -557,9 +550,7 @@ read_addr_spec(uschar *s, uschar *t, int term, uschar **errorptr, { s = read_local_part(s, t, errorptr, FALSE); if (*errorptr == NULL) - { if (*s != term) - { if (*s != '@') *errorptr = string_sprintf("\"@\" or \".\" expected after \"%s\"", t); else @@ -569,8 +560,6 @@ if (*errorptr == NULL) *domainptr = t; s = read_domain(s, t, errorptr); } - } - } return s; } @@ -602,10 +591,15 @@ which may appear in certain headers. If the flag parse_allow_group is set TRUE and parse_found_group is FALSE when this function is called, an address which is the start of a group (i.e. preceded by a phrase and a colon) is recognized; the phrase is ignored and the flag parse_found_group is set. If -this flag is TRUE at the end of an address, then if an extraneous semicolon is -found, it is ignored and the flag is cleared. This logic is used only when -scanning through addresses in headers, either to fulfil the -t option or for -rewriting or checking header syntax. +this flag is TRUE at the end of an address, and if an extraneous semicolon is +found, it is ignored and the flag is cleared. + +This logic is used only when scanning through addresses in headers, either to +fulfil the -t option, or for rewriting, or for checking header syntax. Because +the group "state" has to be remembered between multiple calls of this function, +the variables parse_{allow,found}_group are global. It is important to ensure +that they are reset to FALSE at the end of scanning a header's list of +addresses. Arguments: mailbox points to the RFC822 mailbox @@ -626,8 +620,8 @@ parse_extract_address(uschar *mailbox, uschar **errorptr, int *start, int *end, { uschar *yield = store_get(Ustrlen(mailbox) + 1); uschar *startptr, *endptr; -uschar *s = (uschar *)mailbox; -uschar *t = (uschar *)yield; +uschar *s = US mailbox; +uschar *t = US yield; *domain = 0; @@ -644,7 +638,7 @@ RESTART: /* Come back here after passing a group name */ s = skip_comment(s); startptr = s; /* In case addr-spec */ s = read_local_part(s, t, errorptr, TRUE); /* Dot separated words */ -if (*errorptr != NULL) goto PARSE_FAILED; +if (*errorptr) goto PARSE_FAILED; /* If the terminator is neither < nor @ then the format of the address must either be a bare local-part (we are now at the end), or a phrase @@ -667,7 +661,7 @@ if (*s != '@' && *s != '<') while (*s != '<' && (!parse_allow_group || *s != ':')) { s = read_local_part(s, t, errorptr, FALSE); - if (*errorptr != NULL) + if (*errorptr) { *errorptr = string_sprintf("%s (expected word or \"<\")", *errorptr); goto PARSE_FAILED; @@ -692,8 +686,8 @@ processing it. Note that this is "if" rather than "else if" because it's also used after reading a preceding phrase. There are a lot of broken sendmails out there that put additional pairs of <> -round s. If strip_excess_angle_brackets is set, allow any number of -them, as long as they match. */ +round s. If strip_excess_angle_brackets is set, allow a limited +number of them, as long as they match. */ if (*s == '<') { @@ -702,8 +696,11 @@ if (*s == '<') int bracket_count = 1; s++; - if (strip_excess_angle_brackets) - while (*s == '<') { bracket_count++; s++; } + if (strip_excess_angle_brackets) while (*s == '<') + { + if(bracket_count++ > 5) FAILED(US"angle-brackets nested too deep"); + s++; + } t = yield; startptr = s; @@ -717,7 +714,7 @@ if (*s == '<') if (*s == '@') { s = read_route(s, t, errorptr); - if (*errorptr != NULL) goto PARSE_FAILED; + if (*errorptr) goto PARSE_FAILED; *t = 0; /* Ensure route is ignored - probably overkill */ source_routed = TRUE; } @@ -735,7 +732,7 @@ if (*s == '<') else { s = read_addr_spec(s, t, '>', errorptr, &domainptr); - if (*errorptr != NULL) goto PARSE_FAILED; + if (*errorptr) goto PARSE_FAILED; *domain = domainptr - yield; if (source_routed && *domain == 0) FAILED(US"domain missing in source-routed address"); @@ -745,9 +742,10 @@ if (*s == '<') if (*errorptr != NULL) goto PARSE_FAILED; while (bracket_count-- > 0) if (*s++ != '>') { - *errorptr = (s[-1] == 0)? US"'>' missing at end of address" : - string_sprintf("malformed address: %.32s may not follow %.*s", - s-1, s - (uschar *)mailbox - 1, mailbox); + *errorptr = s[-1] == 0 + ? US"'>' missing at end of address" + : string_sprintf("malformed address: %.32s may not follow %.*s", + s-1, (int)(s - US mailbox - 1), mailbox); goto PARSE_FAILED; } @@ -800,13 +798,13 @@ if (*s != 0) else { *errorptr = string_sprintf("malformed address: %.32s may not follow %.*s", - s, s - (uschar *)mailbox, mailbox); + s, (int)(s - US mailbox), mailbox); goto PARSE_FAILED; } } -*start = startptr - (uschar *)mailbox; /* Return offsets */ +*start = startptr - US mailbox; /* Return offsets */ while (isspace(endptr[-1])) endptr--; -*end = endptr - (uschar *)mailbox; +*end = endptr - US mailbox; /* Although this code has no limitation on the length of address extracted, other parts of Exim may have limits, and in any case, RFC 2821 limits local @@ -819,7 +817,7 @@ if (*end - *start > ADDRESS_MAXLENGTH) return NULL; } -return (uschar *)yield; +return yield; /* Use goto (via the macro FAILED) to get to here from a variety of places. We might have an empty address in a group - the caller can choose to ignore @@ -847,6 +845,11 @@ If the only characters that strictly need quoting are spaces, we return the original string, unmodified. If a quoted string is too long for the buffer, it is truncated. (This shouldn't happen: this is normally handling short strings.) +Hmmph. As always, things get perverted for other uses. This function was +originally for the "phrase" part of addresses. Now it is being used for much +longer texts in ACLs and via the ${rfc2047: expansion item. This means we have +to check for overlong "encoded-word"s and split them. November 2004. + Arguments: string the string to quote - already checked to contain non-printing chars @@ -854,6 +857,8 @@ Arguments: charset the name of the character set; NULL => iso-8859-1 buffer the buffer to put the answer in buffer_size the size of the buffer + fold if TRUE, a newline is inserted before the separating space when + more than one encoded-word is generated Returns: pointer to the original string, if no quoting needed, or pointer to buffer containing the quoted string, or @@ -861,13 +866,15 @@ Returns: pointer to the original string, if no quoting needed, or the introduction */ -uschar * -parse_quote_2047(uschar *string, int len, uschar *charset, uschar *buffer, - int buffer_size) +const uschar * +parse_quote_2047(const uschar *string, int len, uschar *charset, uschar *buffer, + int buffer_size, BOOL fold) { -uschar *s = string; -uschar *t; +const uschar *s = string; +uschar *p, *t; +int hlen; BOOL coded = FALSE; +BOOL first_byte = FALSE; if (charset == NULL) charset = US"iso-8859-1"; @@ -876,24 +883,48 @@ if (charset == NULL) charset = US"iso-8859-1"; if (!string_format(buffer, buffer_size, "=?%s?Q?", charset)) return US"String too long"; -t = buffer + Ustrlen(buffer); +hlen = Ustrlen(buffer); +t = buffer + hlen; +p = buffer; + for (; len > 0; len--) { int ch = *s++; - if (t > buffer + buffer_size - 8) break; + if (t > buffer + buffer_size - hlen - 8) break; + + if ((t - p > 67) && !first_byte) + { + *t++ = '?'; + *t++ = '='; + if (fold) *t++ = '\n'; + *t++ = ' '; + p = t; + Ustrncpy(p, buffer, hlen); + t += hlen; + } + if (ch < 33 || ch > 126 || Ustrchr("?=()<>@,;:\\\".[]_", ch) != NULL) { - if (ch == ' ') *t++ = '_'; else + if (ch == ' ') + { + *t++ = '_'; + first_byte = FALSE; + } + else { - sprintf(CS t, "=%02X", ch); - while (*t != 0) t++; + t += sprintf(CS t, "=%02X", ch); coded = TRUE; + first_byte = !first_byte; } } - else *t++ = ch; + else { *t++ = ch; first_byte = FALSE; } } -sprintf(CS t, "?="); + +*t++ = '?'; +*t++ = '='; +*t = 0; + return coded? buffer : string; } @@ -953,12 +984,13 @@ Arguments: Returns: the fixed RFC822 phrase */ -uschar * -parse_fix_phrase(uschar *phrase, int len, uschar *buffer, int buffer_size) +const uschar * +parse_fix_phrase(const uschar *phrase, int len, uschar *buffer, int buffer_size) { int ch, i; BOOL quoted = FALSE; -uschar *s, *t, *end, *yield; +const uschar *s, *end; +uschar *t, *yield; while (len > 0 && isspace(*phrase)) { phrase++; len--; } if (len > buffer_size/4) return US"Name too long"; @@ -970,7 +1002,7 @@ for (i = 0, s = phrase; i < len; i++, s++) if ((*s < 32 && *s != '\t') || *s > 126) break; if (i < len) return parse_quote_2047(phrase, len, headers_charset, buffer, - buffer_size); + buffer_size, FALSE); /* No non-printers; use the RFC 822 quoting rules */ @@ -1087,7 +1119,7 @@ while (s < end) else if (ch == '(') { - uschar *ss = s; /* uschar after '(' */ + const uschar *ss = s; /* uschar after '(' */ int level = 1; while(ss < end) { @@ -1213,7 +1245,7 @@ Returns: FF_DELIVERED addresses extracted int parse_forward_list(uschar *s, int options, address_item **anchor, - uschar **error, uschar *incoming_domain, uschar *directory, + uschar **error, const uschar *incoming_domain, uschar *directory, error_block **syntax_errors) { int count = 0; @@ -1396,7 +1428,7 @@ for (;;) /* Check file name if required */ - if (directory != NULL) + if (directory) { int len = Ustrlen(directory); uschar *p = filename + len; @@ -1408,16 +1440,53 @@ for (;;) return FF_ERROR; } +#ifdef EXIM_HAVE_OPENAT + /* It is necessary to check that every component inside the directory + is NOT a symbolic link, in order to keep the file inside the directory. + This is mighty tedious. We open the directory and openat every component, + with a flag that fails symlinks. */ + + { + int fd = open(CS directory, O_RDONLY); + if (fd < 0) + { + *error = string_sprintf("failed to open directory %s", directory); + return FF_ERROR; + } + while (*p) + { + uschar temp; + int fd2; + uschar * q = p; + + while (*++p && *p != '/') ; + temp = *p; + *p = '\0'; + + fd2 = openat(fd, CS q, O_RDONLY|O_NOFOLLOW); + close(fd); + *p = temp; + if (fd2 < 0) + { + *error = string_sprintf("failed to open %s (component of included " + "file); could be symbolic link", filename); + return FF_ERROR; + } + fd = fd2; + } + f = fdopen(fd, "rb"); + } +#else /* It is necessary to check that every component inside the directory is NOT a symbolic link, in order to keep the file inside the directory. This is mighty tedious. It is also not totally foolproof in that it leaves the possibility of a race attack, but I don't know how to do any better. */ - while (*p != 0) + while (*p) { int temp; - while (*(++p) != 0 && *p != '/'); + while (*++p && *p != '/'); temp = *p; *p = 0; if (Ulstat(filename, &statbuf) != 0) @@ -1437,11 +1506,16 @@ for (;;) return FF_ERROR; } } +#endif } - /* Open and stat the file */ +#ifdef EXIM_HAVE_OPENAT + else +#endif + /* Open and stat the file */ + f = Ufopen(filename, "rb"); - if ((f = Ufopen(filename, "rb")) == NULL) + if (!f) { *error = string_open_failed(errno, "included file %s", filename); return FF_INCLUDEFAIL; @@ -1451,13 +1525,13 @@ for (;;) { *error = string_sprintf("failed to stat included file %s: %s", filename, strerror(errno)); - fclose(f); + (void)fclose(f); return FF_INCLUDEFAIL; } /* If directory was checked, double check that we opened a regular file */ - if (directory != NULL && (statbuf.st_mode & S_IFMT) != S_IFREG) + if (directory && (statbuf.st_mode & S_IFMT) != S_IFREG) { *error = string_sprintf("included file %s is not a regular file in " "the %s directory", filename, directory); @@ -1478,21 +1552,20 @@ for (;;) { *error = string_sprintf("error while reading included file %s: %s", filename, strerror(errno)); - fclose(f); + (void)fclose(f); return FF_ERROR; } filebuf[statbuf.st_size] = 0; - fclose(f); + (void)fclose(f); addr = NULL; frc = parse_forward_list(filebuf, options, &addr, error, incoming_domain, directory, syntax_errors); if (frc != FF_DELIVERED && frc != FF_NOTDELIVERED) return frc; - if (addr != NULL) + if (addr) { - last = addr; - while (last->next != NULL) { count++; last = last->next; } + for (last = addr; last->next; last = last->next) count++; last->next = *anchor; *anchor = addr; count++; @@ -1637,6 +1710,377 @@ for (;;) } +/************************************************* +* Extract a Message-ID * +*************************************************/ + +/* This function is used to extract message ids from In-Reply-To: and +References: header lines. + +Arguments: + str pointer to the start of the message-id + yield put pointer to the message id (in dynamic memory) here + error put error message here on failure + +Returns: points after the processed message-id or NULL on error +*/ + +uschar * +parse_message_id(uschar *str, uschar **yield, uschar **error) +{ +uschar *domain = NULL; +uschar *id; + +str = skip_comment(str); +if (*str != '<') + { + *error = US"Missing '<' before message-id"; + return NULL; + } + +/* Getting a block the size of the input string will definitely be sufficient +for the answer, but it may also be very long if we are processing a header +line. Therefore, take care to release unwanted store afterwards. */ + +id = *yield = store_get(Ustrlen(str) + 1); +*id++ = *str++; + +str = read_addr_spec(str, id, '>', error, &domain); + +if (*error == NULL) + { + if (*str != '>') *error = US"Missing '>' after message-id"; + else if (domain == NULL) *error = US"domain missing in message-id"; + } + +if (*error != NULL) + { + store_reset(*yield); + return NULL; + } + +while (*id != 0) id++; +*id++ = *str++; +*id++ = 0; +store_reset(id); + +str = skip_comment(str); +return str; +} + + +/************************************************* +* Parse a fixed digit number * +*************************************************/ + +/* Parse a string containing an ASCII encoded fixed digits number + +Arguments: + str pointer to the start of the ASCII encoded number + n pointer to the resulting value + digits number of required digits + +Returns: points after the processed date or NULL on error +*/ + +static uschar * +parse_number(uschar *str, int *n, int digits) +{ + *n=0; + while (digits--) + { + if (*str<'0' || *str>'9') return NULL; + *n=10*(*n)+(*str++-'0'); + } + return str; +} + + +/************************************************* +* Parse a RFC 2822 day of week * +*************************************************/ + +/* Parse the day of the week from a RFC 2822 date, but do not + decode it, because it is only for humans. + +Arguments: + str pointer to the start of the day of the week + +Returns: points after the parsed day or NULL on error +*/ + +static uschar * +parse_day_of_week(uschar *str) +{ +/* +day-of-week = ([FWS] day-name) / obs-day-of-week + +day-name = "Mon" / "Tue" / "Wed" / "Thu" / + "Fri" / "Sat" / "Sun" + +obs-day-of-week = [CFWS] day-name [CFWS] +*/ + +static const uschar *day_name[7]={ US"mon", US"tue", US"wed", US"thu", US"fri", US"sat", US"sun" }; +int i; +uschar day[4]; + +str=skip_comment(str); +for (i=0; i<3; ++i) + { + if ((day[i]=tolower(*str))=='\0') return NULL; + ++str; + } +day[3]='\0'; +for (i=0; i<7; ++i) if (Ustrcmp(day,day_name[i])==0) break; +if (i==7) return NULL; +str=skip_comment(str); +return str; +} + + +/************************************************* +* Parse a RFC 2822 date * +*************************************************/ + +/* Parse the date part of a RFC 2822 date-time, extracting the + day, month and year. + +Arguments: + str pointer to the start of the date + d pointer to the resulting day + m pointer to the resulting month + y pointer to the resulting year + +Returns: points after the processed date or NULL on error +*/ + +static uschar * +parse_date(uschar *str, int *d, int *m, int *y) +{ +/* +date = day month year + +year = 4*DIGIT / obs-year + +obs-year = [CFWS] 2*DIGIT [CFWS] + +month = (FWS month-name FWS) / obs-month + +month-name = "Jan" / "Feb" / "Mar" / "Apr" / + "May" / "Jun" / "Jul" / "Aug" / + "Sep" / "Oct" / "Nov" / "Dec" + +obs-month = CFWS month-name CFWS + +day = ([FWS] 1*2DIGIT) / obs-day + +obs-day = [CFWS] 1*2DIGIT [CFWS] +*/ + +uschar *c,*n; +static const uschar *month_name[]={ US"jan", US"feb", US"mar", US"apr", US"may", US"jun", US"jul", US"aug", US"sep", US"oct", US"nov", US"dec" }; +int i; +uschar month[4]; + +str=skip_comment(str); +if ((str=parse_number(str,d,1))==NULL) return NULL; +if (*str>='0' && *str<='9') *d=10*(*d)+(*str++-'0'); +c=skip_comment(str); +if (c==str) return NULL; +else str=c; +for (i=0; i<3; ++i) if ((month[i]=tolower(*(str+i)))=='\0') return NULL; +month[3]='\0'; +for (i=0; i<12; ++i) if (Ustrcmp(month,month_name[i])==0) break; +if (i==12) return NULL; +str+=3; +*m=i; +c=skip_comment(str); +if (c==str) return NULL; +else str=c; +if ((n=parse_number(str,y,4))) + { + str=n; + if (*y<1900) return NULL; + *y=*y-1900; + } +else if ((n=parse_number(str,y,2))) + { + str=skip_comment(n); + while (*(str-1)==' ' || *(str-1)=='\t') --str; /* match last FWS later */ + if (*y<50) *y+=100; + } +else return NULL; +return str; +} + + +/************************************************* +* Parse a RFC 2822 Time * +*************************************************/ + +/* Parse the time part of a RFC 2822 date-time, extracting the + hour, minute, second and timezone. + +Arguments: + str pointer to the start of the time + h pointer to the resulting hour + m pointer to the resulting minute + s pointer to the resulting second + z pointer to the resulting timezone (offset in seconds) + +Returns: points after the processed time or NULL on error +*/ + +static uschar * +parse_time(uschar *str, int *h, int *m, int *s, int *z) +{ +/* +time = time-of-day FWS zone + +time-of-day = hour ":" minute [ ":" second ] + +hour = 2DIGIT / obs-hour + +obs-hour = [CFWS] 2DIGIT [CFWS] + +minute = 2DIGIT / obs-minute + +obs-minute = [CFWS] 2DIGIT [CFWS] + +second = 2DIGIT / obs-second + +obs-second = [CFWS] 2DIGIT [CFWS] + +zone = (( "+" / "-" ) 4DIGIT) / obs-zone + +obs-zone = "UT" / "GMT" / ; Universal Time + ; North American UT + ; offsets + "EST" / "EDT" / ; Eastern: - 5/ - 4 + "CST" / "CDT" / ; Central: - 6/ - 5 + "MST" / "MDT" / ; Mountain: - 7/ - 6 + "PST" / "PDT" / ; Pacific: - 8/ - 7 + + %d65-73 / ; Military zones - "A" + %d75-90 / ; through "I" and "K" + %d97-105 / ; through "Z", both + %d107-122 ; upper and lower case +*/ + +uschar *c; + +str=skip_comment(str); +if ((str=parse_number(str,h,2))==NULL) return NULL; +str=skip_comment(str); +if (*str!=':') return NULL; +++str; +str=skip_comment(str); +if ((str=parse_number(str,m,2))==NULL) return NULL; +c=skip_comment(str); +if (*str==':') + { + ++str; + str=skip_comment(str); + if ((str=parse_number(str,s,2))==NULL) return NULL; + c=skip_comment(str); + } +if (c==str) return NULL; +else str=c; +if (*str=='+' || *str=='-') + { + int neg; + + neg=(*str=='-'); + ++str; + if ((str=parse_number(str,z,4))==NULL) return NULL; + *z=(*z/100)*3600+(*z%100)*60; + if (neg) *z=-*z; + } +else + { + char zone[5]; + struct { const char *name; int off; } zone_name[10]= + { {"gmt",0}, {"ut",0}, {"est",-5}, {"edt",-4}, {"cst",-6}, {"cdt",-5}, {"mst",-7}, {"mdt",-6}, {"pst",-8}, {"pdt",-7}}; + int i,j; + + for (i=0; i<4; ++i) + { + zone[i]=tolower(*(str+i)); + if (zone[i]<'a' || zone[i]>'z') break; + } + zone[i]='\0'; + for (j=0; j<10 && strcmp(zone,zone_name[j].name); ++j); + /* Besides zones named in the grammar, RFC 2822 says other alphabetic */ + /* time zones should be treated as unknown offsets. */ + if (j<10) + { + *z=zone_name[j].off*3600; + str+=i; + } + else if (zone[0]<'a' || zone[1]>'z') return 0; + else + { + while ((*str>='a' && *str<='z') || (*str>='A' && *str<='Z')) ++str; + *z=0; + } + } +return str; +} + + +/************************************************* +* Parse a RFC 2822 date-time * +*************************************************/ + +/* Parse a RFC 2822 date-time and return it in seconds since the epoch. + +Arguments: + str pointer to the start of the date-time + t pointer to the parsed time + +Returns: points after the processed date-time or NULL on error +*/ + +uschar * +parse_date_time(uschar *str, time_t *t) +{ +/* +date-time = [ day-of-week "," ] date FWS time [CFWS] +*/ + +struct tm tm; +int zone; +extern char **environ; +char **old_environ; +static char gmt0[]="TZ=GMT0"; +static char *gmt_env[]={ gmt0, (char*)0 }; +uschar *try; + +if ((try=parse_day_of_week(str))) + { + str=try; + if (*str!=',') return 0; + ++str; + } +if ((str=parse_date(str,&tm.tm_mday,&tm.tm_mon,&tm.tm_year))==NULL) return NULL; +if (*str!=' ' && *str!='\t') return NULL; +while (*str==' ' || *str=='\t') ++str; +if ((str=parse_time(str,&tm.tm_hour,&tm.tm_min,&tm.tm_sec,&zone))==NULL) return NULL; +tm.tm_isdst=0; +old_environ=environ; +environ=gmt_env; +*t=mktime(&tm); +environ=old_environ; +if (*t==-1) return NULL; +*t-=zone; +str=skip_comment(str); +return str; +} + + + + /************************************************* ************************************************** * Stand-alone test program * @@ -1769,6 +2213,26 @@ while (Ufgets(buffer, sizeof(buffer), stdin) != NULL) else printf("Failed: %d %s\n", extracted, errmess); } +printf("Testing parse_message_id\n"); + +while (Ufgets(buffer, sizeof(buffer), stdin) != NULL) + { + uschar *s, *t, *errmess; + buffer[Ustrlen(buffer) - 1] = 0; + if (buffer[0] == 0) break; + s = buffer; + while (*s != 0) + { + s = parse_message_id(s, &t, &errmess); + if (errmess != NULL) + { + printf("Failed: %s\n", errmess); + break; + } + printf("%s\n", t); + } + } + return 0; }