-#! /usr/bin/perl -w
+#! /usr/bin/env perl
+# We use env, because in some environments of our build farm
+# the Perl 5.010 interpreter is only reachable via $PATH
###############################################################################
# This is the controlling script for the "new" test suite for Exim. It should #
###############################################################################
#use strict;
+use 5.010;
+use feature 'state'; # included in 5.010
+use warnings;
+
use Errno;
use FileHandle;
use Socket;
use Time::Local;
use Cwd;
use File::Basename;
+use FindBin qw'$Bin';
+
+use lib "$Bin/lib";
+use Exim::Runtest;
+
use if $ENV{DEBUG} && $ENV{DEBUG} =~ /\bruntest\b/ => ('Smart::Comments' => '####');
$cf = "bin/cf -exact";
$cr = "\r";
$debug = 0;
+$flavour = do {
+ my $f = Exim::Runtest::flavour();
+ (grep { $f eq $_ } Exim::Runtest::flavours()) ? $f : 'FOO';
+};
$force_continue = 0;
$force_update = 0;
$log_failed_filename = "failed-summary.log";
$optargs = "";
$save_output = 0;
$server_opts = "";
-$flavour = 'FOO';
+$valgrind = 0;
$have_ipv4 = 1;
$have_ipv6 = 1;
$parm_port_d2 = 1226; # Additional for daemon
$parm_port_d3 = 1227; # Additional for daemon
$parm_port_d4 = 1228; # Additional for daemon
+my $dynamic_socket; # allocated later for PORT_DYNAMIC
+
+# Find a suiteable group name for test (currently only 0001
+# uses a group name. A numeric group id would do
+my $parm_mailgroup = Exim::Runtest::mailgroup('mail');
# Manually set locale
-$ENV{'LC_ALL'} = 'C';
+$ENV{LC_ALL} = 'C';
# In some environments USER does not exists, but we
# need it for some test(s)
$ENV{USER} = getpwuid($>)
if not exists $ENV{USER};
+my ($parm_configure_owner, $parm_configure_group);
+my ($parm_ipv4, $parm_ipv6);
+my $parm_hostname;
###############################################################################
###############################################################################
s?\bTESTNUM\b?$_[0]?g;
s?(\b|_)V4NET([\._])?$1$parm_ipv4_test_net$2?g;
s?\bV6NET:?$parm_ipv6_test_net:?g;
+s?\bPORT_DYNAMIC\b?$dynamic_socket->sockport()?eg;
+s?\bMAILGROUP\b?$parm_mailgroup?g;
}
# that are specific to certain file types, though there are also some of those
# inline too.
-while(<IN>)
+LINE: while(<IN>)
{
RESET_AFTER_EXTRA_LINE_READ:
# Custom munges
# File descriptor numbers may vary
s/^writing data block fd=\d+/writing data block fd=dddd/;
- s/running as transport filter: write=\d+ read=\d+/running as transport filter: write=dddd read=dddd/;
+ s/(running as transport filter:) fd_write=\d+ fd_read=\d+/$1 fd_write=dddd fd_read=dddd/;
# ======== Dumpdb output ========
s/waiting for children of \d+/waiting for children of pppp/;
s/waiting for (\S+) \(\d+\)/waiting for $1 (pppp)/;
+ # The spool header file name varies with PID
+ s%^(Writing spool header file: .*/hdr).[0-9]{1,5}%$1.pppp%;
+
# ======== Port numbers ========
# Incoming port numbers may vary, but not in daemon startup line.
# Port in host address in spool file output from -Mvh
s/^-host_address (.*)\.\d+/-host_address $1.9999/;
+ if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) {
+ s/^Connecting to 127\.0\.0\.1 port \K$port/<dynamic port>/;
+ }
+
# ======== Local IP addresses ========
# The amount of space between "host" and the address in verification output
# different wording in the error messages, so we cannot compare them.
s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+ next if /SSL verify error: depth=0 error=certificate not trusted/;
# ======== Maildir things ========
# timestamp output in maildir processing
next if /^SSL info: SSLv2\/v3 write client hello A/;
next if /^SSL info: SSLv3 read server key exchange A/;
next if /SSL verify error: depth=0 error=certificate not trusted/;
- s/SSL3_READ_BYTES/ssl3_read_bytes/;
+ s/SSL3_READ_BYTES/ssl3_read_bytes/i;
+
+ # gnutls version variances
+ next if /^Error in the pull function./;
}
# ======== stderr ========
while (<IN>) { last if !/^\s/; }
}
+ # remote port numbers vary
+ s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
+
+ # Skip hosts_require_dane checks when the options
+ # are unset, because dane ain't always there.
+
+ next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+
+ # SUPPORT_PROXY
+ next if /host in hosts_proxy\?/;
+
+ # Experimental_International
+ next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
+
+ # Environment cleaning
+ next if /\w+ in keep_environment\? (yes|no)/;
+
+ # Sizes vary with test hostname
+ s/^cmd buf flush \d+ bytes$/cmd buf flush ddd bytes/;
+
+ # Spool filesystem free space changes on different systems.
+ s/^((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
+
+ # Non-TLS builds have different expansions for received_header_text
+ if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
+ {
+ $_ .= <IN>;
+ s/\s+\}\}(?=\(Exim )/\}\} /;
+ }
+ if (/^ condition: def:tls_cipher$/)
+ {
+ <IN>; <IN>; <IN>; <IN>; <IN>; <IN>;
+ <IN>; <IN>; <IN>; <IN>; <IN>; next;
+ }
+
+ # Not all platforms build with DKIM enabled
+ next if /^PDKIM >> Body data for hash, canonicalized/;
+
+ # Not all platforms support TCP Fast Open, and the compile omits the check
+ if (s/\S+ in hosts_try_fastopen\? no \(option unset\)\n$//)
+ {
+ $_ .= <IN>;
+ s/ \.\.\. >>> / ... /;
+ }
+
+ next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
+
# When Exim is checking the size of directories for maildir, it uses
# the check_dir_size() function to scan directories. Of course, the order
# of the files that are obtained using readdir() varies from system to
@saved = ();
}
- # remote port numbers vary
- s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
-
- # Skip hosts_require_dane checks when the options
- # are unset, because dane ain't always there.
-
- next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
-
- # SUPPORT_PROXY
- next if /host in hosts_proxy\?/;
-
- # Experimental_International
- next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
-
# Skip some lines that Exim puts out at the start of debugging output
# because they will be different in different binaries.
/^log selectors =/ ||
/^cwd=/ ||
/^Fixed never_users:/ ||
+ /^Configure owner:/ ||
/^Size of off_t:/
);
# [2] if there is a C in the prompt and $force_continue is true
# Returns: returns the answer
-sub interact{
-print $_[0];
-if ($_[1]) { $_ = "u"; print "... update forced\n"; }
- elsif ($_[2]) { $_ = "c"; print "... continue forced\n"; }
- else { $_ = <T>; }
+sub interact {
+ my ($prompt, $have_u, $have_c) = @_;
+
+ print $prompt;
+
+ if ($have_u) {
+ print "... update forced\n";
+ return 'u';
+ }
+
+ if ($have_c) {
+ print "... continue forced\n";
+ return 'c';
+ }
+
+ return lc <T>;
}
sub log_failure {
- my $logfile = shift();
- my $testno = shift();
- my $detail = shift() || '';
- if ( open(my $fh, ">>", $logfile) ) {
- print $fh "Test $testno $detail failed\n";
- close $fh;
- }
+ my ($logfile, $testno, $detail) = @_;
+
+ open(my $fh, '>>', $logfile) or return;
+
+ print $fh "Test $testno "
+ . (defined $detail ? "$detail " : '')
+ . "failed\n";
}
for (;;)
{
- print "Continue, Show, or Quit? [Q] ";
- $_ = $force_continue ? "c" : <T>;
- tests_exit(1) if /^q?$/i;
- log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
+ $_ = interact('Continue, Show, or Quit? [Q] ', undef, $force_continue);
+ tests_exit(1) if /^q?$/;
+ log_failure($log_failed_filename, $testno, $rf) if (/^c$/ && $force_continue);
return 0 if /^c$/i;
last if (/^s$/);
}
print "\n";
for (;;)
{
- interact("Continue, Update & retry, Quit? [Q] ", $force_update, $force_continue);
- tests_exit(1) if /^q?$/i;
- log_failure($log_failed_filename, $testno, $rsf) if (/^c$/i && $force_continue);
+ $_ = interact('Continue, Update & retry, Quit? [Q] ', $force_update, $force_continue);
+ tests_exit(1) if /^q?$/;
+ log_failure($log_failed_filename, $testno, $rsf) if (/^c$/ && $force_continue);
return 0 if /^c$/i;
last if (/^u$/i);
}
print "\n";
for (;;)
{
- interact("Continue, Retry, Update current"
- . ($sf_current ne $sf_flavour ? "/Save for flavour '$flavour'" : "")
- . " & retry, Quit? [Q] ", $force_update, $force_continue);
- tests_exit(1) if /^q?$/i;
+ $_ = interact('Continue, Retry, Update current'
+ . ($sf_current ne $sf_flavour ? "/Save for flavour '$flavour'" : '')
+ . ' & retry, Quit? [Q] ', $force_update, $force_continue);
+ tests_exit(1) if /^q?$/;
log_failure($log_failed_filename, $testno, $sf_current) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
return 1 if /^r$/i;
{ 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
},
+ 'optional_config' =>
+ { 'stdout' => '/^(
+ dkim_(canon|domain|private_key|selector|sign_headers|strict)
+ |gnutls_require_(kx|mac|protocols)
+ |hosts_(requ(est|ire)|try)_(dane|ocsp)
+ |hosts_(avoid|nopass|require|verify_avoid)_tls
+ |socks_proxy
+ |tls_[^ ]*
+ )($|[ ]=)/x' },
+
'sys_bindir' =>
{ 'mainlog' => 's%/(usr/)?bin/%SYSBINDIR/%' },
+ 'sync_check_data' =>
+ { 'mainlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/',
+ 'rejectlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/'},
+
+ 'debuglog_stdout' =>
+ { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //;
+ s/Process \d+ is ready for new message/Process pppp is ready for new message/'
+ },
+
+ 'timeout_errno' => # actual errno differs Solaris vs. Linux
+ { 'mainlog' => 's/(host deferral .* errno) <\d+> /$1 <EEE> /' },
};
for (;;)
{
- interact("Continue, Update & retry, or Quit? [Q] ", $force_update, $force_continue);
- tests_exit(1) if /^q?$/i;
- log_failure($log_failed_filename, $testno, "missing email") if (/^c$/i && $force_continue);
- last if /^c$/i;
+ $_ = interact('Continue, Update & retry, or Quit? [Q] ', $force_update, $force_continue);
+ tests_exit(1) if /^q?$/;
+ log_failure($log_failed_filename, $testno, "missing email") if (/^c$/ && $force_continue);
+ last if /^c$/;
# For update, we not only have to unlink the file, but we must also
# remove it from the @oldmails vector, as otherwise it will still be
# checked for when we re-run the test.
- if (/^u$/i)
+ if (/^u$/)
{
foreach $key (keys %expected_mails)
{
for (;;)
{
- interact("Continue, Update, or Quit? [Q] ", $force_update, $force_continue);
- tests_exit(1) if /^q?$/i;
- log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/i && $force_continue);
- last if /^c$/i;
- if (/^u$/i)
+ $_ = interact('Continue, Update, or Quit? [Q] ', $force_update, $force_continue);
+ tests_exit(1) if /^q?$/;
+ log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/ && $force_continue);
+ last if /^c$/;
+ if (/^u$/)
{
foreach $key (keys %expected_msglogs)
{
my($aux_info) = $_[4];
my($yield) = 1;
+our %ENV = map { $_ => $ENV{$_} } grep { /^(?:USER|SHELL|PATH|TERM|EXIM_TEST_.*)$/ } keys %ENV;
+
if (/^(\d+)\s*$/) # Handle unusual return code
{
my($r) = $_[2];
# Various Unix management commands are recognized
if (/^(ln|ls|du|mkdir|mkfifo|touch|cp|cat)\s/ ||
- /^sudo (rmdir|rm|chown|chmod)\s/)
+ /^sudo\s(rmdir|rm|mv|chown|chmod)\s/)
{
run_system("$_ >>test-stdout 2>>test-stderr");
return 1;
# command, triggered by $server_pid being non-zero. The server sends its output
# to a different file. The variable $server_opts, if not empty, contains
# options to disable IPv4 or IPv6 if necessary.
+# This works because "server" swallows its stdin before waiting for a connection.
if (/^server\s+(.*)$/)
{
# not drop privilege when -C and -D options are present. To run the exim
# command as root, we use sudo.
-elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+)?\s+(.*)$/)
+elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+)?\s+(.*)$/)
{
$args = $6;
my($envset) = (defined $1)? $1 : "";
# Done backwards just in case there are more than 9
- my($i);
- for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
+ for (my $i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
if ( $args =~ /\$msg\d/ )
{
tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
$args =~ s/(?:^|\s)-d\S*// if $optargs =~ /(?:^|\s)-d/;
- $cmd = "$envset$sudo$parm_cwd/eximdir/exim$special$optargs " .
+ my $opt_valgrind = $valgrind ? "valgrind --leak-check=yes --suppressions=$parm_cwd/aux-fixed/valgrind.supp " : "";
+
+ $cmd = "$envset$sudo$opt_valgrind" .
+ "$parm_cwd/eximdir/exim$special$optargs " .
"-DEXIM_PATH=$parm_cwd/eximdir/exim$special " .
"-C $parm_cwd/test-config $args " .
">>test-stdout 2>>test-stderr";
}
elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
{
+
+ # The port and the $dynamic_socket was already allocated while parsing the
+ # script file, where -DSERVER=wait:PORT_DYNAMIC was encountered.
+
my $listen_port = $1;
- my $waitmode_sock = new FileHandle;
if ($debug) { printf ">> wait-mode daemon: $cmd\n"; }
run_system("sudo mkdir spool/log 2>/dev/null");
run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
- my ($s_ip,$s_port) = ('127.0.0.1', $listen_port);
- my $sin = sockaddr_in($s_port, inet_aton($s_ip))
- or die "** Failed packing $s_ip:$s_port\n";
- socket($waitmode_sock, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
- or die "** Unable to open socket $s_ip:$s_port: $!\n";
- setsockopt($waitmode_sock, SOL_SOCKET, SO_REUSEADDR, 1)
- or die "** Unable to setsockopt(SO_REUSEADDR): $!\n";
- bind($waitmode_sock, $sin)
- or die "** Unable to bind socket ($s_port): $!\n";
- listen($waitmode_sock, 5);
my $pid = fork();
if (not defined $pid) { die "** fork failed: $!\n" }
if (not $pid) {
close(STDIN);
- open(STDIN, "<&", $waitmode_sock) or die "** dup sock to stdin failed: $!\n";
- close($waitmode_sock);
+ open(STDIN, '<&', $dynamic_socket) or die "** dup sock to stdin failed: $!\n";
+ close($dynamic_socket);
print "[$$]>> ${cmd}-server\n" if ($debug);
exec "exec ${cmd}-server";
- exit(1);
+ die "Can't exec ${cmd}-server: $!\n";
}
while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
select(undef, undef, undef, 0.3); # Let the daemon get going
###############################################################################
###############################################################################
-# Here beginneth the Main Program ...
+# Here begins the Main Program ...
###############################################################################
###############################################################################
# we map all (.../bin) to (.../sbin:.../bin)
$ENV{PATH} = do {
my %seen = map { $_, 1 } split /:/, $ENV{PATH};
- join ':' => map { m{(.*)/bin$}
- ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_)
- : ($_) }
+ join ':' => map { m{(.*)/bin$}
+ ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_)
+ : ($_) }
split /:/, $ENV{PATH};
};
# Check for the "less" command #
##################################################
-$more = "more" if system("which less >/dev/null 2>&1") != 0;
+$more = 'more' if system('which less >/dev/null 2>&1') != 0;
##################################################
print "You need to have sudo access to root to run these tests. Checking ...\n";
-if (system("sudo date >/dev/null") != 0)
+if (system('sudo true >/dev/null') != 0)
{
die "** Test for sudo failed: testing abandoned.\n";
}
# as the path to the binary. If the first argument does not start with a
# '/' but exists in the file system, it's assumed to be the Exim binary.
-$parm_exim = (@ARGV > 0 && (-x $ARGV[0] or $ARGV[0] =~ m?^/?))? Cwd::abs_path(shift @ARGV) : "";
+($parm_exim, @ARGV) = Exim::Runtest::exim_binary(@ARGV);
print "Exim binary is $parm_exim\n" if $parm_exim ne "";
if ($arg eq "-NOIPV4") { $have_ipv4 = 0; next; }
if ($arg eq "-NOIPV6") { $have_ipv6 = 0; next; }
if ($arg eq "-KEEP") { $save_output = 1; next; }
+ if ($arg eq "-VALGRIND") { $valgrind = 1; next; }
if ($arg =~ /^-FLAVOU?R$/) { $flavour = shift; next; }
}
$optargs .= " $arg";
# takes precedence; otherwise exim-snapshot takes precedence over any numbered
# releases.
-if ($parm_exim eq "")
- {
- my($use_srcdir) = "";
-
- opendir DIR, ".." || die "** Failed to opendir \"..\": $!\n";
- while ($f = readdir(DIR))
- {
- my($srcdir);
-
- # Try this directory if it is "exim4" or if it is exim-snapshot or exim-n.m
- # possibly followed by -RCx where n.m is greater than any previously tried
- # directory. Thus, we should choose the highest version of Exim that has
- # been compiled.
-
- if ($f eq "exim4" || $f eq "exim-snapshot" || $f eq 'src')
- { $srcdir = $f; }
- else
- { $srcdir = $f
- if ($f =~ /^exim-\d+\.\d+(-RC\d+)?$/ && $f gt $use_srcdir); }
-
- # Look for a build directory with a binary in it. If we find a binary,
- # accept this source directory.
-
- if ($srcdir)
- {
- opendir SRCDIR, "../$srcdir" ||
- die "** Failed to opendir \"$cwd/../$srcdir\": $!\n";
- while ($f = readdir(SRCDIR))
- {
- if ($f =~ /^build-/ && -e "../$srcdir/$f/exim")
- {
- $use_srcdir = $srcdir;
- $parm_exim = "$cwd/../$srcdir/$f/exim";
- $parm_exim =~ s'/[^/]+/\.\./'/';
- last;
- }
- }
- closedir(SRCDIR);
- }
-
- # If we have found "exim4" or "exim-snapshot", that takes precedence.
- # Otherwise, continue to see if there's a later version.
-
- last if $use_srcdir eq "exim4" || $use_srcdir eq "exim-snapshot";
- }
- closedir(DIR);
- print "Exim binary found in $parm_exim\n" if $parm_exim ne "";
- }
-
# If $parm_exim is still empty, ask the caller
if ($parm_exim eq "")
die "** Cannot run $parm_exim: $!\n";
while(<EXIMINFO>)
{
+ if (my ($version) = /^Exim version (\S+)/) {
+ my $git = `git describe --dirty=-XX --match 'exim-4*'`;
+ if (defined $git and $? == 0) {
+ chomp $git;
+ $version =~ s/^\d+\K\./_/;
+ $git =~ s/^exim-//i;
+ $git =~ s/.*-\Kg([[:xdigit:]]+(?:-XX)?)/$1/;
+ print <<___
+
+*** Version mismatch
+*** Exim binary: $version
+*** Git : $git
+
+___
+ if not $version eq $git;
+ }
+ }
$parm_eximuser = $1 if /^exim_user = (.*)$/;
$parm_eximgroup = $1 if /^exim_group = (.*)$/;
$parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
- print "$_" if /wrong owner/;
+ ($parm_configure_owner, $parm_configure_group) = ($1, $2)
+ if /^Configure owner:\s*(\d+):(\d+)/;
+ print if /wrong owner/;
}
close(EXIMINFO);
print "Unable to extract exim_user from binary.\n";
print "Check if Exim refused to run; if so, consider:\n";
print " TRUSTED_CONFIG_LIST ALT_CONFIG_PREFIX WHITELIST_D_MACROS\n";
+ print "If debug permission denied, are you in the exim group?\n";
die "Failing to get information from binary.\n";
}
die "Unable to check the TRUSTED_CONFIG_LIST, seems to be empty?\n";
}
-open(EXIMINFO, "$parm_exim -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
+die "CONFIGURE_OWNER ($parm_configure_owner) does not match the user invoking $0 ($>)\n"
+ if $parm_configure_owner != $>;
+
+die "CONFIGURE_GROUP ($parm_configure_group) does not match the group invoking $0 ($))\n"
+ if 0020 & (stat "$parm_cwd/test-config")[2]
+ and $parm_configure_group != $);
+
+
+open(EXIMINFO, "$parm_exim -d-all+transport -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
die "** Cannot run $parm_exim: $!\n";
print "-" x 78, "\n";
{
my(@temp);
- if (/^Exim version/) { print; }
+ if (/^(Exim|Library) version/) { print; }
elsif (/^Size of off_t: (\d+)/)
{
##################################################
# Check for redis #
##################################################
-if (defined $parm_support{'Experimental_Redis'})
+if (defined $parm_lookups{'redis'})
{
if (system("redis-server -v 2>/dev/null >/dev/null") == 0)
{
# Find this host's IP addresses - there may be many, of course, but we keep
# one of each type (IPv4 and IPv6).
-$parm_ipv4 = "";
-$parm_ipv6 = "";
-
-$local_ipv4 = "";
-$local_ipv6 = "";
-
-open(IFCONFIG, "ifconfig -a|") || die "** Cannot run \"ifconfig\": $!\n";
-while (($parm_ipv4 eq "" || $parm_ipv6 eq "") && ($_ = <IFCONFIG>))
+open(IFCONFIG, '-|', (grep { -x "$_/ip" } split /:/, $ENV{PATH}) ? 'ip address' : 'ifconfig -a')
+ or die "** Cannot run 'ip address' or 'ifconfig -a'\n";
+while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
{
- my($ip);
- if ($parm_ipv4 eq "" &&
- $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
+ if (not $parm_ipv4 and /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
{
- $ip = $1;
- next if ($ip =~ /^127\./ || $ip =~ /^10\./);
- $parm_ipv4 = $ip;
+ next if $1 =~ /^(?:127|10)\./;
+ $parm_ipv4 = $1;
}
- if ($parm_ipv6 eq "" &&
- $_ =~ /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)/i)
+ if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:\/\d+)/i)
{
- $ip = $1;
- next if ($ip eq "::1" || $ip =~ /^fe80/i);
- $parm_ipv6 = $ip;
+ next if $1 eq '::1' or $1 =~ /^fe80/i;
+ $parm_ipv6 = $1;
}
}
close(IFCONFIG);
# Use private IP addresses if there are no public ones.
-$parm_ipv4 = $local_ipv4 if ($parm_ipv4 eq "");
-$parm_ipv6 = $local_ipv6 if ($parm_ipv6 eq "");
-
# If either type of IP address is missing, we need to set the value to
# something other than empty, because that wrecks the substitutions. The value
# is reflected, so use a meaningful string. Set appropriate options for the
# of IPV4 or IPv6 can be simulated by command options, which force $have_ipv4
# and $have_ipv6 false.
-if ($parm_ipv4 eq "")
+if (not $parm_ipv4)
{
$have_ipv4 = 0;
$parm_ipv4 = "<no IPv4 address found>";
$parm_running{"IPv4"} = " ";
}
-if ($parm_ipv6 eq "")
+if (not $parm_ipv6)
{
$have_ipv6 = 0;
$parm_ipv6 = "<no IPv6 address found>";
# Find the host name, fully qualified.
chomp($temp = `hostname`);
-$parm_hostname = (gethostbyname($temp))[0];
-$parm_hostname = "no.host.name.found" if $parm_hostname eq "";
+die "'hostname' didn't return anything\n" unless defined $temp and length $temp;
+if ($temp =~ /\./)
+ {
+ $parm_hostname = $temp;
+ }
+else
+ {
+ $parm_hostname = (gethostbyname($temp))[0];
+ $parm_hostname = "no.host.name.found" unless defined $parm_hostname and length $parm_hostname;
+ }
print "Hostname is $parm_hostname\n";
if ($parm_hostname !~ /\./)
tests_exit(-1, "Exim user ($parm_eximuser,$parm_exim_uid) cannot be "
."the same as caller ($parm_caller,$parm_caller_uid)");
}
+if ($parm_caller_gid eq $parm_exim_gid) {
+ tests_exit(-1, "Exim group ($parm_eximgroup,$parm_exim_gid) cannot be "
+ ."the same as caller's ($parm_caller) group as it confuses "
+ ."results analysis");
+}
print "The Exim user needs access to the test suite directory. Checking ...";
# contains ****. We open input from the terminal so that we can read responses
# to prompts.
-open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
+if (not $force_continue) {
+ # runtest needs to interact if we're not in continue
+ # mode. It does so by communicate to /dev/tty
+ open(T, "/dev/tty") or tests_exit(-1, "Failed to open /dev/tty: $!");
+}
+
print "\nPress RETURN to run the tests: ";
$_ = $force_continue ? "c" : <T>;
my($docheck) = 1;
my($thistestdir) = substr($test, 0, -5);
+ $dynamic_socket->close() if $dynamic_socket;
+
if ($lasttestdir ne $thistestdir)
{
$gnutls = 0;
if (/^no_stdout_check/) { $stdout_skip = 1; next; }
if (/^rmfiltertest/) { $rmfiltertest = 1; next; }
if (/^sortlog/) { $sortlog = 1; next; }
+ if (/\bPORT_DYNAMIC\b/) { $dynamic_socket = Exim::Runtest::dynamic_socket(); next; }
}
# Reset to beginning of file for per test interpreting/processing
seek(SCRIPT, 0, 0);
my($subtest_startline) = $lineno;
- # Now run the command. The function returns 0 if exim was run and waited
- # for, 1 if any other command was run and waited for, and 2 if a command
+ # Now run the command. The function returns 0 for an inline command,
+ # 1 if a non-exim command was run and waited for, 2 if an exim
+ # command was run and waited for, and 3 if a command
# was run and not waited for (usually a daemon or server startup).
my($commandname) = "";
$_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
- print "... continue forced\n" if $force_continue;
+ if ($force_continue)
+ {
+ print "\nstderr tail:\n";
+ print "===================\n";
+ system("tail -20 test-stderr");
+ print "===================\n";
+ print "... continue forced\n";
+ }
+
last if /^[rc]$/i;
if (/^e$/i)
{
tests_exit(0);
# End of runtest script
-# vim: set sw=2 et :
git://git.exim.org / exim.git / blobdiff