# We use env, because in some environments of our build farm
# the Perl 5.010 interpreter is only reachable via $PATH
+# Copyright (c) The Exim Maintainers 2024
+# SPDX-License-Identifier: GPL-2.0-or-later
+
###############################################################################
# This is the controlling script for the "new" test suite for Exim. It should #
# be possible to export this suite for running on a wide variety of hosts, in #
#use strict;
use v5.10.1;
use warnings;
-use if $^V >= v5.19.11, experimental => 'smartmatch';
use Errno;
use FileHandle;
use Pod::Usage;
use Getopt::Long;
use FindBin qw'$RealBin';
+use File::Copy;
use lib "$RealBin/lib";
use Exim::Runtest;
-use Exim::Utils qw(uniq numerically);
+use Exim::Utils qw(uniq numerically cp);
use if $ENV{DEBUG} && scalar($ENV{DEBUG} =~ /\bruntest\b/) => 'Smart::Comments' => '####';
use if $ENV{DEBUG} && scalar($ENV{DEBUG} =~ /\bruntest\b/) => 'Data::Dumper';
my ($parm_ipv4, $parm_ipv6, $parm_ipv6_stripped);
my $parm_hostname;
+# Convenience for regex'
+# for tighter, see https://metacpan.org/dist/IO-Socket-IP/source/lib/IO/Socket/IP.pm#L37
+my $re_ipv4 = qr/\d{1,3}(?:\.\d{1,3}){3}/;
+my $re_6g = qr/[[:xdigit:]]{1,4}/;
+my $re_6s = qr/${re_6g}:/;
+my $re_ipv6 = qr/${re_6s}{0,7}${re_6g}(?:::${re_6s}{0,5}${re_6g})?/;
+my $re_ip = qr/(?:${re_ipv4}|${re_ipv6})/;
+
###############################################################################
###############################################################################
sub new_value {
my($oldid, $base, $sequence) = @_;
my($newid) = $cache{$oldid};
+print ">> replace $oldid -> $newid\n" if ($debug && defined $newid);
if (! defined $newid)
{
$newid = sprintf($base, $$sequence++);
+ print ">> new $oldid -> $newid\n" if $debug;
$cache{$oldid} = $newid;
}
return $newid;
# into the same standard values throughout the data from a single test.
# Message ids get this treatment (can't be made reliable for times), and
# times in dumped retry databases are also handled in a special way, as are
-# incoming port numbers.
+# incoming port numbers and PIDs.
# On entry to the subroutine, the file to write to is already opened with the
# name MUNGED. The input file name is the only argument to the subroutine.
$date = "\\d{2}-\\w{3}-\\d{4}\\s\\d{2}:\\d{2}:\\d{2}";
+# Debug time & pid
+
+$time_pid = "(?:(?:\\d{2}:\\d{2}:\\d{2}\\s+)?\\d+\\s)";
+
# Pattern for matching pids at start of stderr lines; initially something
# that won't match.
LINE: while(<IN>)
{
RESET_AFTER_EXTRA_LINE_READ:
+ if ($munge_skip)
+ {
+ # Munging is a no-op, except for exim_msgdate specials.
+ # Useful when testing exim_msgdate so that
+ # we compare unmunged dates and message-ids.
+ s%^localhost \d+ from message-id != given number \d+ at \K/.+(?=/test/eximdir/exim_msgdate line 387.$)%DIR%;
+
+ print MUNGED;
+ next;
+ }
+
# Custom munges
if ($extra)
{
next if $extra =~ m%^/% && eval $extra;
eval $extra if $extra =~ m/^s/;
+ eval substr($extra, 1) if $extra =~ m/^R/;
}
# Check for "*** truncated ***"
# patchexim should have fixed this for us
#s/Exim \K\d+[._]\d+[\w_-]*/x.yz/i;
- # Replace Exim message ids by a unique series
- s/((?:[^\W_]{6}-){2}[^\W_]{2})
- /new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
+ # Replace Exim message ids by a unique series.
+ # Both old and new formats, with separate replace series, for now.
+ s/(\d[^\W_]{5}-[^\W_]{6}-[^\W_]{2})
+ /new_value($1, "10Hm%s-0005vi-00", \$next_msgid_old)/egx;
+ s/(\d[^\W_]{5}-[^\W_]{11}-[^\W_]{4})
+ /new_value($1, "10Hm%s-000000005vi-0000", \$next_msgid)/egx;
# The names of lock files appear in some error and debug messages
s/\.lock(\.[-\w]+)+(\.[\da-f]+){2}/.lock.test.ex.dddddddd.pppppppp/;
# There are differences in error messages between OpenSSL versions
s/SSL_CTX_set_cipher_list/SSL_connect/;
+ s/error=\Kauthority and subject key identifier mismatch/self signed certificate/;
+ s/error=\Kself-signed certificate/self signed certificate/;
# One error test in expansions mentions base 62 or 36
s/is not a base (36|62) number/is not a base 36\/62 number/;
s/forced fail after \d seconds/forced fail after d seconds/;
# This message may contain a different DBM library name
- s/Failed to open \S+( \([^\)]+\))? file/Failed to open DBM file/;
+ s/Failed to open \S+( \([^\)]+\))? file/Failed to open hintsdb file/;
# The message for a non-listening FIFO varies
s/:[^:]+: while opening named pipe/: Error: while opening named pipe/;
# Debugging output of lists of hosts may have different sort keys
- s/sort=\S+/sort=xx/ if /^\S+ (?:\d+\.){3}\d+ mx=\S+ sort=\S+/;
+ s/^\s*\S+ (?:\d+\.){3}\d+ mx=\S+ sort=\K\S+/xx/;
# Random local part in callout cache testing
s/myhost.test.ex-\d+-testing/myhost.test.ex-dddddddd-testing/;
my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
$expired = '' if !defined $expired;
- # Round the time-difference up to nearest even value
- my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1;
+ # Make time-difference minimum 2, and rounded up to even value
+ my($increment) = date_seconds($date3) - date_seconds($date2) + 1;
+ $increment = 2 if ($increment == 0);
+ $increment = ($increment >> 1) << 1;
# We used to use globally unique replacement values, but timing
# differences make this impossible. Just show the increment on the
s/T:(\S+)\s-22\s(\S+)\s/T:$1 -22 xxxx /;
# port numbers in dumpdb output
- s/T:([a-z.]+(:[0-9.]+)?):$parm_port_n /T:$1:PORT_N /;
+ s/T:([a-z0-9.]+(:[0-9.]+|:\[[^]]+])?):$parm_port_n /T:$1:PORT_N /;
+ s/T:([a-z0-9.[\]]+(:[0-9.]+|:\[[^]]+])?):$parm_port_s /T:$1:PORT_S /;
+ # and exinext
+ s/Transport: (?:[a-z0-9.]+|\[[^\]]+]) (?:[0-9.]+|\[[^\]]+]):\K$parm_port_s /PORT_S /;
# port numbers in stderr
s/^set_process_info: .*\]:\K$parm_port_d /PORT_D /;
# time used was fixed when I first started running automatic Exim tests.
# Date/time in header lines and SMTP responses
- s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
- /Tue, 2 Mar 1999 09:44:33 +0000/gx;
+ s/[A-Z][a-z]{2},
+ (\s|\xE2\x96\x91)
+ \d\d?
+ (\s|\xE2\x96\x91)
+ [A-Z][a-z]{2}
+ (\s|\xE2\x96\x91)
+ \d{4}
+ (\s|\xE2\x96\x91)
+ \d\d\:\d\d:\d\d
+ (\s|\xE2\x96\x91)
+ [-+]\d{4}
+ /Tue,${1}2${2}Mar${3}1999${4}09:44:33${5}+0000/gx;
# and in a French locale
s/\S{4},\s\d\d?\s[^,]+\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
/dim., 10 f\xE9vr 2019 20:05:49 +0000/gx;
# Date/time in logs and in one instance of a filter test
s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?\s/1999-03-02 09:44:33 /gx;
- s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}(\s[+-]\d\d\d\d)?\s/2017-07-30 18:51:05.712 /gx;
+ s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}(?:\s(?:[+-]\d\d\d\d|[A-Z]{2}T))?\s/2017-07-30 18:51:05.712 /gx;
s/^Logwrite\s"\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Logwrite "1999-03-02 09:44:33/gx;
# Date/time in syslog test
s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s/2017-07-30 18:51:05 /gx;
s/((D|[RQD]T)=)\d\.\d{3}s/$1q.qqqs/g;
# Date/time in message separators
- s/(?:[A-Z][a-z]{2}\s){2}\d\d\s\d\d:\d\d:\d\d\s\d\d\d\d
- /Tue Mar 02 09:44:33 1999/gx;
+ s/(?:[A-Z][a-z]{2}
+ (\s|\xE2\x96\x91)
+ ){2}\d\d
+ (\s|\xE2\x96\x91)
+ \d\d:\d\d:\d\d
+ (\s|\xE2\x96\x91)
+ \d\d\d\d
+ /Tue${1}Mar${1}02${2}09:44:33${3}1999/gx;
# Date of message arrival in spool file as shown by -Mvh
s/^\d{9,10}\s0$/ddddddddd 0/;
s/\d\d-\w\w\w-\d\d\d\d\s\d\d:\d\d:\d\d\s[-+]\d\d\d\d,/06-Sep-1999 15:52:48 +0100,/gx;
# Dates/times in debugging output for writing retry records
- if (/^ first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/)
+ if (/^(.+)first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/)
{
- my($next) = $3 - $2;
- $_ = " first failed=dddd last try=dddd next try=+$next $4\n";
+ my($next) = $4 - $3;
+ $_ = "$1first failed=dddd last try=dddd next try=+$next $5\n";
}
- s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
- s/^(\s*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
+ s/^(.*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
+ s/^(.*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
# Time to retry may vary
s/time to retry = \S+/time to retry = tttt/;
# LibreSSL
# TLSv1:AES256-GCM-SHA384:256
# TLSv1:ECDHE-RSA-CHACHA20-POLY1305:256
+ # TLS1.3:AEAD-AES256-GCM-SHA384:256
#
# ECDHE-RSA-CHACHA20-POLY1305
# AES256-GCM-SHA384
s/(?<!-)(AES256-GCM-SHA384)/RSA-$1/;
+ s/AEAD-(AES256-GCM-SHA384)/RSA-$1/g;
s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305)(?!:)/ke-$3-AES256-SHAnnn/g;
s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305):256/ke-$3-AES256-SHAnnn:xxx/g;
s/TLS error on connection \(gnutls_handshake\): Error in the pull function\./a TLS session is required but an attempt to start TLS failed/g;
# (replace old with new, hoping that old only happens in one situation)
- s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+ s/TLS error on connection to ${re_ipv4} \[${re_ipv4}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
# signature algorithm names
s/\bgid=\d+/gid=gggg/;
s/\begid=\d+/egid=gggg/;
- s/\b(pid=|PID: )\d+/$1pppp/;
+ s/\b(?:pid=|pid\s|PID:\s|Process\s|child\s)\K(\d+)/new_value($1, "p%s", \$next_pid)/gxe;
+ s/ Ci=\K(\d+)/new_value($1, "p%s", \$next_pid)/gxe;
s/\buid=\d+/uid=uuuu/;
s/\beuid=\d+/euid=uuuu/;
s/set_process_info:\s+\d+/set_process_info: pppp/;
- s/queue run pid \d+/queue run pid ppppp/;
s/process \d+ running as transport filter/process pppp running as transport filter/;
s/process \d+ writing to transport filter/process pppp writing to transport filter/;
s/reading pipe for subprocess \d+/reading pipe for subprocess pppp/;
s/remote delivery process \d+ ended/remote delivery process pppp ended/;
# Pid in temp file in appendfile transport
- s"test-mail/temp\.\d+\."test-mail/temp.pppp.";
+ s"test-mail/(subdir/)?temp\K\.\d+\.".pppp.";
# Optional pid in log lines
s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\.\d{3}|)(\s[+-]\d{4}|)(\s\[\d+\])/
s/\(port=(\d+)/"(port=" . new_value($1, "%s", \$next_port)/e;
# This handles "connection from" and the like, when the port is given
- if (!/listening for SMTP on/ && !/Connecting to/ && !/=>/ && !/->/
- && !/\*>/ && !/Connection refused/)
- {
- s/\[([a-z\d:]+|\d+(?:\.\d+){3})\]:(\d+)/"[".$1."]:".new_value($2,"%s",\$next_port)/ie;
- }
+ s/(\[${re_ip}\]:)(\d+)/$1.new_value($2,"%s",\$next_port)/ie
+ unless ( /listening for SMTP on/ || /Connecting to/
+ || /[=*-]>/ || /==/ || /\*\*/
+ || /Connection refused/ || /in response to/
+ || /T(?:ransport)?:/
+ );
# Port in host address in spool file output from -Mvh
- s/^(--?host_address) (.*)\.\d+/$1 $2.9999/;
+ s/^(--?host_address) (.*[:.])\d+$/$1 ${2}9999/;
if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) {
s/^Connecting to 127\.0\.0\.1 port \K$port/<dynamic port>/;
# ======== IP error numbers and messages ========
# These vary between operating systems
- s/Can(no|')t assign requested address/Network Error/;
+ s/(?:Can(?:no|')t assign requested address|Address not available)/Netwk addr not available/;
s/Operation timed out/Connection timed out/;
s/Address family not supported by protocol family/Network Error/;
- s/Network( is)? unreachable/Network Error/;
+ s/Network(?: is)? unreachable/Network Error/;
s/Invalid argument/Network Error/;
s/\(\d+\): Network/(dd): Network/;
s/([\s,])S=\d+\b/$1S=sss/;
s/:S\d+\b/:Ssss/;
- s/^(\s*\d+m\s+)\d+(\s+[a-z0-9-]{16} <)/$1sss$2/i if $is_stdout;
+ s/^(\s*\d+[mhd]\s+)\d+(\s+(?:[[:alnum:]-]{23}|[[:alnum:]-]{16}) <)/TTT sss$2/i if $is_stdout;
s/\sSIZE=\d+\b/ SIZE=ssss/;
s/\ssize=\d+\b/ size=sss/ if $is_stderr;
s/old size = \d+\b/old size = sssss/;
# numbers, or handle specific bad conditions in different ways, leading to
# different wording in the error messages, so we cannot compare them.
-#XXX This loses any trailing "deliving unencypted to" which is unfortunate
+#XXX This loses any trailing "delivering unencypted to" which is unfortunate
# but I can't work out how to deal with that.
s/(TLS session: \(SSL_\w+\): error:)(.*)(?!: delivering)/$1 <<detail omitted>>/;
+ s/TLS error on connection from .*\K\(SSL_accept\): error:.*:unexpected eof while reading$/(tls lib accept fn): TCP connection closed by peer/;
s/(TLS error on connection from .* \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
next if /SSL verify error: depth=0 error=certificate not trusted/;
+ # OpenSSL 3.2.1
+ # OpenSSL 3.0.0
+ s/TLS\ error\ \(D-H\ param\ setting\ .*\ error:\K
+ .*
+ (?:dh\ key\ too\ small|unknown\ security\ bits)
+ /xxxxxxxx:SSL routines::dh key too small/x;
+
+ # OpenSSL 1.1.1
+ s/error:\K0B080074:x509 certificate routines:X509_check_private_key(?=:key values mismatch$)/05800074:x509 certificate routines:/;
+ s/error:\K02001002:system library:fopen(?=:No such file or directory$)/80000002:system library:/;
+ s/error:\K0909006C:PEM routines:get_name(?=:no start line$)/0480006C:PEM routines:/;
+
# ======== Maildir things ========
# timestamp output in maildir processing
s/(timestamp=|\(timestamp_only\): )\d+/$1ddddddd/g;
# SRS timestamps and signatures vary by hostname and from run to run
- s/SRS0=....=.[^=]?=([^=]+)=([^@]+)\@([^ ]+)/SRS0=ZZZZ=YY=$1=$2\@$3/;
+ s/(?i)SRS0=....=.[^=]?=([^=]+)=([^@]+)\@([^ ]+)/SRS0=ZZZZ=YY=$1=$2\@$3/g;
# ======== Output from the "fd" program about open descriptors ========
# MIME boundaries in RFC3461 DSN messages
s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
+ # Cyrus SASL library version differences (rejectlog)
+ s/Cyrus SASL permanent failure: \Kuser not found$/generic failure/;
+
# ==========================================================
# Some munging is specific to the specific file types
# remote IPv6 addrs vary
s/^(Connection request from) \[.*:.*:.*\]$/$1 \[ipv6\]/;
+ # Hints DB use of lockfiles is provider-dependent
+ s/Failed to open \K(?:hintsdb|database lock) file (.*\/spool\/db\/[^. ]*)(?:.lockfile)?(?: for reading)?(?=: No such file or directory$)/hintsdb $1/;
+
# openssl version variances
# Error lines on stdout from SSL contain process id values and file names.
# They also contain a source file name and line number, which may vary from
next if /SSL verify error: depth=0 error=certificate not trusted/;
s/SSL3_READ_BYTES/ssl3_read_bytes/i;
s/CONNECT_CR_FINISHED/ssl3_read_bytes/i;
- s/^\d+:error:\d+(?:E\d+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
- s/^error:[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/error:dddddddd:$1/;
+ s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)?
+ (:SSL\ routines:ssl3_read_bytes:)
+ ssl(?:v3|\/tls)
+ ([^:]+:)
+ .*
+ (:SSL\ alert\ number\ \d\d)$
+ /pppp:error:dddddddd$1sslv3$2\[...\]$3/x;
+ s/^error:\K[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/dddddddd:$1/;
+ s/^error:\K[[:xdigit:]]+:SSL routines::(tlsv13 alert certificate required)$/dddddddd:SSL routines:ssl3_read_bytes:$1/;
+ s/^error:\K
+ [[:xdigit:]]+:SSL\ routines::
+ ((?:tlsv1|sslv3)\ alert\ (?:unknown\ ca|certificate\ revoked))$
+ /dddddddd:SSL routines:ssl3_read_bytes:$1/x;
+ s/^error:\K
+ [[:xdigit:]]+:SSL\ routines::
+ ssl\/tls\ (alert\ (?:unknown\ ca|certificate\ revoked))$
+ /dddddddd:SSL routines:ssl3_read_bytes:sslv3 $1/x;
# gnutls version variances
next if /^Error in the pull function./;
+ # Retry DB record gets truncated when TESTDIR is a long string
+ s/T:.*\(MTA-imposed quota exceeded while writing to\K.*$/ <elided>)/;
+
# optional IDN2 variant conversions. Accept either IDN1 or IDN2
s/conversion strasse.de/conversion xn--strae-oqa.de/;
s/conversion: german.xn--strae-oqa.de/conversion: german.straße.de/;
# subsecond timstamp info in reported header-files
- s/^(-received_time_usec \.)\d{6}$/$1uuuuuu/;
+ s/^-received_time_usec \.\K\d{6}$/uuuuuu/;
+ s/^-received_time_complete \K\d+\.\d{6}$/tttt.uuuuuu/;
# Postgres server takes varible time to shut down; lives in various places
s/^waiting for server to shut down\.+ done$/waiting for server to shut down.... done/;
# DMARC is not always supported by the build
next if /^dmarc_tld_file =/;
+ # timestamp in dmarc history file
+ s/received \K\d{10}$/1692480217/;
# ARC is not always supported by the build
next if /^arc_sign =/;
+ # LIMITS is not always supported by the build
+ next if /^limits_advertise_hosts =/;
+
+ # PRDR
+ next if /^hosts_try_prdr = \*$/;
+
# TLS resumption is not always supported by the build
next if /^tls_resumption_hosts =/;
next if /^-tls_resumption/;
+ next if /^host_name_extract = /;
# gsasl library version may not support some methods
s/250-AUTH ANONYMOUS PLAIN SCRAM-SHA-1\K SCRAM-SHA-256//;
+
+ # mailq times change with when the run is done, vs. static-source spoolfiles
+ s/\s*\d*[hd](?= 317 (?:[-0-9A-Za-z]{23}|[-0-9A-Za-z]{16}) <nobody\@test.ex>)/DDd/;
+ # mailq sizes change with caller running the test
+ s/\s[01]m [34]\d\d(?= (?:[-0-9A-Za-z]{23}|[-0-9A-Za-z]{16}) <CALLER\@the.local.host.name>)/ 1m 396/;
+
+ # Not all builds include EXPERIMENTAL_DSN_INFO (1 of 2)
+ if (/^X-Exim-Diagnostic:/)
+ {
+ while (<IN>) {
+ last if (/^$/ || !/^\s/);
+ }
+ goto RESET_AFTER_EXTRA_LINE_READ;
+ }
}
# ======== stderr ========
elsif ($is_stderr)
{
# The very first line of debugging output will vary
-
s/^Exim version .*/Exim version x.yz ..../;
- # Debugging lines for Exim terminations and process-generation
+ # Skip some lines that Exim puts out at the start of debugging output
+ # because they will be different in different binaries.
+
+ next if /^$time_pid?
+ (?: .*\sBerkeley\ DB
+ | \sProbably\ (?:Berkeley\ DB|ndbm|GDBM)
+ | \sUsing\ (?:tdb|sqlite3)
+ | Authenticators\ \((?:built-in|dynamic)\):
+ | Lookups(?:\(built-in\))?:
+ | Support\ for:
+ | Routers\ \((?:built-in|dynamic)\):
+ | Transports\ \((?:built-in|dynamic)\):
+ | Malware:
+ | log\ selectors\ =
+ | cwd=
+ | Fixed\ never_users
+ | Configure\ owner
+ | Size\ of\ off_t:
+ )
+ /x;
+
+ # Hints DB use of lockfiles is provider-dependent
+ next if /lock(?:ing|ed) .*\/spool\/db\/[^.]+\.lockfile$/;
+ s/closed hints database\K and lockfile$//;
+
+ # Hints DBs with transactions are provider-dependent, and flow changes
+ # to take advantage of them need different opens and different flags.
+ # Drop all the debug output for opens and closes.
+ if (/EXIM_DBOPEN(_MULTI)?: file <.*spool\/db\/retry>/)
+ {
+ $_ = <IN>;
+ next if (/returned from EXIM_DBOPEN(_MULTI)?: 0x[[:xdigit:]]+$/);
+ $_ = <IN>;
+ <IN> if (/returned from EXIM_DBOPEN(_MULTI)?: \(nil\)$/);
+ next;
+ }
+ if (/EXIM_DBCLOSE(_MULTI)?/) { <IN>; next; }
+ next if /retaining retry hintsdb handle$/;
+ next if /using cached retry hintsdb (?:handle|nonpresence)$/;
+ if (/final close of cached retry db$/) { <IN>; <IN>; next; }
+ next if /dbfn_transaction_(?:start|commit)$/;
+
+ # Various hintsdb backends
+ s/(?:bdb|tdb|gdbm|ndbm|sqlite)
+ _open\(flags\ 0x(\d)
+ \ mode\ 0640\)
+ \ (?:No\ such\ file\ or\ directory|unable\ to\ open\ database\ file)$
+ /hintsdb_open(flags 0x$1 mode 0640) No such file or directory/x;
+
+ # Lines with a leading pid. Only handle >= 4-digit PIDs to avoid converting SMTP respose codes
+ s/^\s*(\d{4,})\s(?!(?:previous message|in\s|bytes remain in|SMTP accept process running))/new_value($1, "p%s", \$next_pid) . ' '/e;
+
+ # Connection IDs
+ s/connection_id: \K(\d+)$/new_value($1, "conn%s", \$next_conn)/e;
- s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
- s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
- s/^(?:\s*\d+ )(exec .* -oPX)$/pppp $1/;
+ # Debugging lines for Exim terminations and process-generation
next if /(?:postfork: | fork(?:ing|ed) for )/;
# IP address lookups use gethostbyname() when IPv6 is not supported,
s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
+ # Extra lookups done when ipv6 is supported
+ next if /^host_fake_gethostbyname\(af=inet6\) returned 1 \(HOST_NOT_FOUND\)$/;
+
# we don't care what TZ enviroment the testhost was running
next if /^Reset TZ to/;
+ # port numbers
+ s/(?:\[[^\]]*\]:|V4NET\.0\.0\.0:|localhost::?|127\.0\.0\.1[.:]:?|port[= ])\K$parm_port_d/PORT_D/;
+ s/(?:\[[^\]]*\]:|V4NET\.0\.0\.0:|localhost::?|127\.0\.0\.1[.:]:?|port[= ])\K$parm_port_d2/PORT_D2/;
+ s/(?:\[[^\]]*\]:|V4NET\.0\.0\.0:|localhost::?|127\.0\.0\.1[.:]:?|port[= ])\K$parm_port_d3/PORT_D3/;
+ s/(?:\[[^\]]*\]:|V4NET\.0\.0\.0:|localhost::?|127\.0\.0\.1[.:]:?|port[= ])\K$parm_port_d4/PORT_D4/;
+ s/(?:\[[^\]]*\]:|V4NET\.0\.0\.0:|localhost::?|127\.0\.0\.1[.:]:?|port[= ])\K$parm_port_s/PORT_S/;
+ s/(?:\[[^\]]*\]:|V4NET\.0\.0\.0:|localhost::?|127\.0\.0\.1[.:]:?|port[= ])\K$parm_port_n/PORT_N/;
+
# ========= Exim lookups ==================
# Lookups have a char which depends on the number of lookup types compiled in,
# in stderr output. Replace with a "0". Recognising this while avoiding
# other output is fragile; perhaps the debug output should be revised instead.
- s%^\s+(:?closing )?\K[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
+ s%^\s+(?:closing )?\K[0-Z]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
# drop gnutls version strings
next if /GnuTLS compile-time version: \d+[\.\d]+$/;
next if /GnuTLS runtime version: \d+[\.\d]+$/;
+ # and unwanted debug
+ next if /^GnuTLS<2>: FIPS140-2 (context is not set|operation mode switched from initial to not-approved)$/;
+ next if /^GnuTLS<3>: ASSERT: sign.c\[_gnutls_sign_is_secure2\]:\d+$/;
+ next if /^GnuTLS<3>: ASSERT: \.\.\/\.\.\/lib\/pkcs11.c\[find_multi_objs_cb\]:/;
+ next if /^GnuTLS<3>: ASSERT: \.\.\/\.\.\/lib\/pkcs11.c\[gnutls_pkcs11_obj_list_import_url3\]:/;
# drop openssl version strings
next if /OpenSSL compile-time version: OpenSSL \d+[\.\da-z]+/;
# this is timing-dependent
next if /^OpenSSL: creating STEK$/;
+ next if /^selfsign cert rotate$/;
+
+ # TLS preload
+ # only OpenSSL speaks of these
+ next if /^TLS: (preloading (DH params \S+|ECDH curve \S+|CA bundle) for server|generating selfsigned server cert)/;
+ next if /^ Diffie-Hellman initialized from default/;
+ next if /^ ECDH OpenSSL (< )?[\d.+]+: temp key parameter settings:/;
+ next if /^ ECDH: .*'prime256v1'/;
+ next if /^tls_verify_certificates: system$/;
+ next if /^tls_set_watch: .*\/cert.pem/;
+ next if /^Generating 2048 bit RSA key/;
+
+ # TLS preload
+ # only GnuTLS speaks of these
+ next if /^GnuTLS global init required$/;
+ next if /^TLS: basic cred init, server/;
+ next if /^TLS: preloading cipher list for server: NULL$/;
+ s/^GnuTLS using default session cipher\/priority "NORMAL"$/TLS: not preloading cipher list for server/;
+ next if /^GnuTLS<2>: added \d+ protocols, \d+ ciphersuites, \d+ sig algos and \d+ groups into priority list$/;
+ next if /^GnuTLS<2>: (Disabling X.509 extensions|signing structure using RSA-SHA256)/;
+ next if /^GnuTLS.*(wrap_nettle_mpi_print|gnutls_subject_alt_names_get|get_alt_name)/;
+ next if /^GnuTLS<[23]>: (p11|ASSERT: pkcs11.c|Initializing needed PKCS #11 modules)/;
+ next if /^GnuTLS<2>: Intel (AES|GCM) accelerator was detected/;
+ next if /^Added \d{3} certificate authorities/;
+ next if /^TLS: not preloading CRL for server/;
+ next if /^GnuTLS<3>: ASSERT: extensions.c\[_gnutls_get_extension/;
+ next if /^GnuTLS<3>: ASSERT: \.\.\/\.\.\/\.\.\/lib\/x509\//;
+ next if /^GnuTLS<2>: Initializing PKCS #11 modules/;
+
+
+ # only kevent platforms (FreeBSD, OpenBSD) say this
+ next if /^watch dir/;
+ next if /^watch file .*\/usr\/local/;
+ next if /^watch file .*\/etc\/ssl/;
+ next if /^closing watch fd:/;
+
+ # TLS preload
+ # there happen in different orders for OpenSSL/GnuTLS/noTLS
+ next if /^TLS: generating selfsigned server cert/;
+ next if /^TLS: not preloading (CA bundle|cipher list) for server$/;
+ next if /^TLS: not preloading server certs$/;
+
+ # some platforms are missing the standard CA bundle file
+ next if /^tls_set_watch\(\) fail on '\/usr\/(?:lib\/ssl|local\/openssl3\/etc\/pki\/tls)\/cert.pem': No such file or directory$/;
# drop lookups
- next if /^Lookups \(built-in\):/;
- next if /^Loading lookup modules from/;
- next if /^Loaded \d+ lookup modules/;
- next if /^Total \d+ lookups/;
+ next if /(?: Lookups\ \((?:built-in|dynamic)\):
+ | searchtype\ \w+\ not\ initially\ found
+ | Loaded\ "\w+"\ \(\d+\ lookup\ types?\)
+ | Loading\ lookup\ modules\ from
+ | Loaded\ \d+\ lookup\ modules
+ | Total\ \d+\ built-in\ lookups)/x;
+
+ # drop loads of dyn-module drivers
+ next if /^$time_pid?(?:Loading\ \w+\ (?:router|transport|auth)\ driver\ from
+ | Loaded\ \w+\ (?:router|transport|auth)$)/x;
# drop compiler information
- next if /^Compiler:/;
+ next if /^$time_pid?Compiler:/;
# and the ugly bit
# different libraries will have different numbers (possibly 0) of follow-up
# lines, indenting with more data
- if (/^Library version:/) {
- while (1) {
+ if (/^$time_pid?Library version:/) {
+ $_ = <IN>;
+ if (/^$time_pid?\s/) {
$_ = <IN>;
- next if /^\s/;
- goto RESET_AFTER_EXTRA_LINE_READ;
+ if (/^$time_pid?\s/) {
+ $_ = <IN>;
+ }
}
+ goto RESET_AFTER_EXTRA_LINE_READ;
}
# drop other build-time controls emitted for debugging
- next if /^WHITELIST_D_MACROS:/;
- next if /^TRUSTED_CONFIG_LIST:/;
+ next if /^$time_pid?WHITELIST_D_MACROS:/;
+ next if /^$time_pid?TRUSTED_CONFIG_LIST:/;
# As of Exim 4.74, we log when a setgid fails; because we invoke Exim
# with -be, privileges will have been dropped, so this will always
if (/looked up these IP addresses/);
next if /name=localhost address=::1/;
- # drop pdkim debugging header
+ # DKIM: Not all builds include
next if /^DKIM( <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+|: no signatures)$/;
+ next if /try option acl_smtp_dkim$/;
+ # Some platforms have TIOCOUT, some do not
+ next if /\d+ bytes remain in socket output buffer$/;
# Various other IPv6 lines must be omitted too
next if /using host_fake_gethostbyname for \S+ \(IPv6\)/;
next if /get\[host\|ipnode\]byname\[2\]\(af=inet6\)/;
next if /DNS lookup of \S+ \(AAAA\) using fakens/;
- next if / in dns_ipv4_lookup?/;
next if / writing neg-cache entry for .*AAAA/;
- next if /^faking res_search\(AAAA\) response length as 65535/;
+ next if /^ *faking res_search\(AAAA\) response length as 65535/;
+ if (/ in dns_ipv4_lookup\?$/)
+ {
+ $_= <IN>;
+ if (/ list element: \*$/)
+ {
+ $_= <IN>;
+ next if / in dns_ipv4_lookup\? yes \(matched "\*"\)/;
+ }
+ goto RESET_AFTER_EXTRA_LINE_READ;
+ }
if (/DNS lookup of \S+ \(AAAA\) gave NO_DATA/)
{
$_= <IN>; # Gets "returning DNS_NODATA"
next;
}
- # Non-TLS bulds have a different Recieved: header expansion
- s/^((.*)\t}}}}by \$primary_hostname \$\{if def:received_protocol \{with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
- s/^((\s*).*considering: with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
- if (/condition: def:tls_in_cipher_std$/)
+ # Non-TLS builds have a different default Recieved: header expansion
+ s/^((.*)\t}}}}by \$primary_hostname \$\{if def:received_protocol \{with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_ver { (\$tls_in_ver)}}\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
+ s/^((\s*).*considering: with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_ver { (\$tls_in_ver)}}\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
+ if (/condition: def:tls_in_ver$/)
{
$_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
$_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
- $_= <IN>; $_= <IN>; $_= <IN>; next;
+ $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
+ $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
+ $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>; next;
}
# Skip tls_advertise_hosts and hosts_require_tls checks when the options
# are unset, because tls ain't always there.
+ next if /^((>>>)?\s*host)? in tls_advertise_hosts\?$/;
next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
\sno\s\((option\sunset|end\sof\slist)\)/x;
+ # non-TLS builds cannot have DANE
+
+ next if /lack of DNSSEC traceability precludes DANE$/;
+
# Skip auxiliary group lists because they will vary.
next if /auxiliary group list:/;
next if /failed to load readline:/;
- # Some DBM libraries seem to make DBM files on opening with O_RDWR without
- # O_CREAT; other's don't. In the latter case there is some debugging output
- # which is not present in the former. Skip the relevant lines (there are
- # three of them).
-
- if (/returned from EXIM_DBOPEN: \(nil\)/)
- {
- $_ .= <IN>;
- s?\Q$parm_cwd\E?TESTSUITE?g;
- if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
- { $_ = <IN>; next; }
- }
-
# Some tests turn on +expand debugging to check on expansions.
# Unfortunately, the Received: expansion varies, depending on whether TLS
# is compiled or not. So we must remove the relevant debugging if it is.
s/unexpected disconnection while reading SMTP command from \[127.0.0.1\] \K\(error: Connection reset by peer\) //;
# Platform-dependent resolver option bits
- s/^ (?:writing|update) neg-cache entry for [^,]+-\K[0-9a-f]+, ttl/xxxx, ttl/;
+ s/(?:writing|update) neg-cache entry for [^,]+-\K[0-9a-f]+, ttl/xxxx, ttl/;
# timing variance, run-to-run
s/^time on queue = \K1s/0s/;
next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
# daemon notifier socket
- s/^(\s*\d+|ppppp) (creating notifier socket)$/ppppp $2/;
- s/^ \@(.*exim_daemon_notify)$/ $1/;
- s/^(\s*\d+|ppppp) \@?(.*exim_daemon_notify)$/ppppp $2/;
+ s% \@(?=[^ @]+/spool/exim_daemon_notify$)% %;
next if /unlinking notifier socket/;
+ # daemon notifier socket
+ # Timing variance over runs. Collapse repeated memssages.
+ if (/notify triggered queue run/)
+ {
+ my $line = $_;
+ while (/notify triggered queue run/) { $_ = <IN>; }
+ $_ = $line . $_;
+ }
+
+ # Different builds will have different lookup types included
+ # and different numbers of lookup types result in different type-code letters,
+ # so convert them all to "0"
+ s%(?<!lsearch)[^ ](?=TESTSUITE/aux-fixed/(?:0414.list[12]|0464.domains)$)%0%;
+
+ # Environment cleaning
+ next if /\w+ in keep_environment\? (yes|no)/;
+
+ # Sizes vary with test hostname
+ s/^cmd buf flush \d+ bytes/cmd buf flush ddd bytes/;
+
+ # Different platforms put different error messages into retry records
+ s/dbfn_write: key=.* datalen \K\d{2,3}$/nn/;
+ s/dbfn_read: size \K\d{2,3}(?= return$)/nnn/;
+
+ # Spool filesystem free space changes on different systems.
+ s/((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
+
+ # CONTENT_SCAN
+ next if /try option acl_(?:not_)?smtp_mime$/;
+
# DISABLE_OCSP
next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
+ # WELLKNOWN
+ next if / in wellknown_advertise_hosts\?/;
+
# SUPPORT_PROXY
next if /host in hosts_proxy\?/;
# PIPE_CONNECT
- next if / in (pipelining_connect_advertise_hosts|hosts_pipe_connect)?\? no /;
+ if ( /^(>>>)?\s*host in pipelining_connect_advertise_hosts\?$/ )
+ {
+ $_ = <IN>;
+ while ( /^(>>>)?\s*list element:/ ) { $_ = <IN>; }
+ goto RESET_AFTER_EXTRA_LINE_READ;
+ }
+ next if / in (?:pipelining_connect_advertise_hosts|hosts_pipe_connect)?\? no /;
# Experimental_International
next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
# Experimental_REQUIRETLS
next if / in tls_advertise_requiretls?\? no \(end of list\)/;
- # TCP Fast Open
- next if /^(ppppp )?setsockopt FASTOPEN: Network Error/;
+ # Experimental_LIMITS
+ if ( /^((>>>)?\s*host)? in limits_advertise_hosts\?$/ )
+ {
+ $_ = <IN>;
+ while ( /^(>>>)?\s*list element: !\*$/ ) { $_ = <IN>; }
+ goto RESET_AFTER_EXTRA_LINE_READ;
+ }
+ next if / in limits_advertise_hosts?\? no \(matched "!\*"\)/;
- # Environment cleaning
- next if /\w+ in keep_environment\? (yes|no)/;
+ # Experimental_XCLIENT
+ next if / in hosts_xclient\? no \(option unset\)/;
- # Sizes vary with test hostname
- s/^cmd buf flush \d+ bytes$/cmd buf flush ddd bytes/;
+ # Experimental_WELLKNOWN
+ next if / in hosts_wellknown\? no \(option unset\)/;
- # Spool filesystem free space changes on different systems.
- s/^((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
+ # TCP Fast Open
+ next if /^(ppppp )?setsockopt FASTOPEN: Network Error/;
+
+ # DISABLE_TLS_RESUME
+ # TLS resumption is not always supported by the build
+ next if /in tls_resumption_hosts\?/;
+ next if /RE '.outlook.com/;
# Non-TLS builds have different expansions for received_header_text
if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
<IN>; <IN>; <IN>; <IN>; <IN>; next;
}
+ # various features can be built as dynamic-load modules
+ next if /loading module '(?:arc|exim_filter|dkim|dmarc|pam|perl|radius|sieve_filter|spf)'$/;
+
# Not all platforms build with DKIM enabled
next if /^DKIM >> Body data for hash, canonicalized/;
+ # Not all platforms build with SOCKS enabled
+ next if /^try option socks_proxy$/;
+
# Not all platforms build with SPF enabled
- next if /^(spf_conn_init|SPF_dns_exim_new|spf_compile\.c)/;
+ next if /(^$time_pid?spf_conn_init|spf_compile\.c)/;
+ next if /try option spf_smtp_comment_template$/;
+ next if /^$time_pid?Loaded "(?:dkim|dmarc|exim_filter|spf)"$/;
# Not all platforms have sendfile support
next if /^cannot use sendfile for body: no support$/;
next if /^DKIM \[[^[]+\] (Header hash|b) computed:/;
# Not all platforms support TCP Fast Open, and the compile omits the check
- if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|no \(end of list\)|yes \(matched "\*"\))\n$//)
- {
- chomp;
- $_ .= <IN>;
- s/ \.\.\. >>> / ... /;
+ next if /\S+ in hosts_try_fastopen\? (no \(option unset\)|no \(end of list\)|yes \(matched "\*"\))\n$/ ;
+
+# if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|no \(end of list\)|yes \(matched "\*"\))\n$//)
+# {
+# chomp;
+# $_ .= <IN>;
+# s/ \.\.\. >>> / ... /;
if (s/ non-TFO mode connection attempt to 224.0.0.0, 0 data\b$//) { chomp; $_ .= <IN>; }
s/Address family not supported by protocol family/Network Error/;
- s/Network is unreachable/Network Error/;
- }
- next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
- s/^(Connecting to .* \.\.\. sending) \d+ (nonTFO early-data)$/$1 dd $2/;
+ s/Network(?: is)? unreachable/Network Error/;
+# }
+ next if /^(ppppp |\d+ )?setsockopt FASTOPEN: Protocol not available$/;
+ s/^(sending) \d+ (nonTFO early-data)$/$1 dd $2/;
- if (/^([0-9: ]* # possible timestamp
- Connecting\ to\ [^ ]+\ [^ ]+(\ from\ [^ ]+)?)\ \.\.\.
+ if (/^[0-9: ]* # possible timestamp
\ .*TFO\ mode\x20
(sendto,\ no\ data:\ EINPROGRESS # Linux
|connection\ attempt\ to\ [^,]+,\ 0\ data) # MacOS & no-support
$/x)
{
- $_ = $1 . " ... " . <IN>;
- s/^(.* \.\.\.) [0-9: ]*connected$/$1 connected/;
-
- if (/^Connecting to .* \.\.\. connected$/)
+ $_ = <IN>;
+ if (/^connected$/)
{
$_ .= <IN>;
- if (/^(Connecting to .* \.\.\. )connected\n\s+SMTP(\(close\)>>|\(Connection refused\)<<)$/)
+ if (/^connected\n\s+SMTP(\(close\)>>|\(Connection refused\)<<)$/)
{
- $_ = $1 . "failed: Connection refused\n" . <IN>;
- s/^(Connecting .*)\n\s+SMTP\(close\)>>$/$1/;
+ $_ = "failed: Connection refused\n" . <IN>;
+ s/^\n\s+SMTP\(close\)>>$/$1/;
}
- elsif (/^(Connecting to .* \.\.\. connected\n)read response data: size=/)
+ elsif (/^(connected\n)read response data: size=/)
{ $_ = $1; }
# Date/time in SMTP banner
}
# Specific pointer values reported for DB operations change from run to run
- s/^(\s*returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
- s/^(\s*EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+ s/(returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+ s/(EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
# Platform-dependent output during MySQL startup
next if /PerconaFT file system space/;
# Postgres version-dependent differences
s/^initdb: warning: (enabling "trust" authentication for local connections)$/\nWARNING: $1/;
+ # Postgre DB server PID
+ s/ \[\d+\] (?=(LOG: redirecting log|HINT: Future log output))/ [pppp] /;
# Not all builds include DMARC
next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
- # TLS resumption is not always supported by the build
- next if /in tls_resumption_hosts\?/;
-
# Platform differences in errno strings
s/ SMTP\(Operation timed out\)<</ SMTP(Connection timed out)<</;
s/^errno = \d+$/errno = EEE/;
s/^writing error \d+: /writing error EEE: /;
- # Some platforms have to flip to slow-mode taint-checking
- next if /switching to slow-mode taint checking/;
+ # Time-only, in debug output
+ # we have to handle double lines from the DBOPEN, hence placed down here and /mg
+ s/^\d\d:\d\d:\d\d\s+/01:01:01 /mg;
+
+ # pid in debug lines
+ s/^(\d\d:\d\d:\d\d\s+)(\d+)/$1 . new_value($2, "p%s", \$next_pid) . " "/mgxe;
+ s/(?<!post-)[Pp]rocess\K(\s\d+ )/new_value($1, "p%s", \$next_pid) . " "/gxe;
+
+ # Path in environment varies
+ s/ PATH=\K.*$/<munged>/;
# When Exim is checking the size of directories for maildir, it uses
# the check_dir_size() function to scan directories. Of course, the order
@saved = ();
}
- # Skip some lines that Exim puts out at the start of debugging output
- # because they will be different in different binaries.
-
- print MUNGED
- unless (/^Berkeley DB: / ||
- /^Probably (?:Berkeley DB|ndbm|GDBM)/ ||
- /^Authenticators:/ ||
- /^Lookups:/ ||
- /^Support for:/ ||
- /^Routers:/ ||
- /^Transports:/ ||
- /^Malware:/ ||
- /^log selectors =/ ||
- /^cwd=/ ||
- /^Fixed never_users:/ ||
- /^Configure owner:/ ||
- /^Size of off_t:/
- );
-
-
+ print MUNGED;
}
next;
next if / Berkeley DB error: /;
# CHUNKING: exact sizes depend on hostnames in headers
- s/(=>.* K C="250- \d)\d+ (byte chunk, total \d)\d+/$1nn $2nn/;
+ s/(=>.* K (?:DKIM=\S+ )?C="250- \d)\d+ (byte chunk, total \d)\d+/$1nn $2nn/;
- # openssl version variances
- s/(TLS error on connection [^:]*: error:)[0-9A-F]{8}(:system library):(?:fopen|func\(4095\)):(No such file or directory)$/$1xxxxxxxx$2:fopen:$3/;
- s/(DANE attempt failed.*error:)[0-9A-F]{8}(:SSL routines:)(?:(?i)ssl3_get_server_certificate|tls_process_server_certificate|CONNECT_CR_CERT)(?=:certificate verify failed$)/$1xxxxxxxx$2ssl3_get_server_certificate/;
+ # OpenSSL version variances
+ s/(TLS error on connection [^:]*: error:)[0-9A-F]{8}(:system library):(?:fopen|func\(4095\)|):(No such file or directory)$/$1xxxxxxxx$2:fopen:$3/;
+ next if /TLS error \(SSL_read\): .*error:0A000126:SSL routines::unexpected eof while reading$/ ;
+ s/EVDATA: \K\(SSL_accept\): error:0A000126:SSL routines::unexpected eof while reading/SSL_accept: TCP connection closed by peer/;
+ s/(DANE attempt failed.*error:)[0-9A-F]{8}(:SSL routines:)(?:(?i)ssl3_get_server_certificate|tls_process_server_certificate|CONNECT_CR_CERT|)(?=:certificate verify failed$)/$1xxxxxxxx$2ssl3_get_server_certificate/;
s/(DKIM: validation error: )error:[0-9A-F]{8}:rsa routines:(?:(?i)int_rsa_verify|CRYPTO_internal):(?:bad signature|algorithm mismatch)$/$1Public key signature verification has failed./;
s/ARC: AMS signing: privkey PEM-block import: error:\K[0-9A-F]{8}:(PEM routines):get_name:(no start line)/0906D06C:$1:PEM_read_bio:$2/;
- # gnutls version variances
+ # GnuTLS version variances
if (/TLS error on connection \(recv\): .* (Decode error|peer did not send any certificate)/)
{
my $prev = $_;
else
{ $_ = $prev; }
}
- # translate gnutls error into the openssl one
+ # translate GnuTLS error into the OpenSSL one
s/ARC: AMS signing: privkey PEM-block import: \KThe requested data were not available.$/error:0906D06C:PEM routines:PEM_read_bio:no start line/;
+ # and then both into the OpenSSL 3.x one
+ s/ARC: AMS signing: privkey PEM-block import: error:\K[0-9A-F]{8}:PEM routines:PEM_read_bio:no start line$/1E08010C:DECODER routines::unsupported/;
# DKIM timestamps
- if ( /(DKIM: d=.*) t=([0-9]*) x=([0-9]*) / )
+ if ( /(DKIM: d=.*) t=([0-9]*) x=([0-9]*) \[/ )
{
my ($prefix, $t_diff) = ($1, $3 - $2);
s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
}
+ else
+ { s/DKIM: d=.* \Kt=[0-9]* \[/t=T [/; }
# GnuTLS reports a different keysize vs. OpenSSL, for ed25519 keys
s/signer: [^ ]* bits:\K 256/ 253/;
s/public key too short:\K 256 bits/ 253 bits/;
+ # with GnuTLS we cannot log single bad ALPN. So ignore the with-OpenSSL log line.
+ # next if /TLS ALPN (http) rejected$/;
+
# port numbers
s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;
s/(?:\[[^\]]*\]:|port )\K$parm_port_d2/PORT_D2/;
# Platform differences in errno strings
s/Arg list too long/Argument list too long/;
+
+ # OpenSSL vs. GnuTLS
+ s/session: \K\((SSL_connect|gnutls_handshake)\): timed out/(tls lib connect fn): timed out/;
+ s/TLS error on connection from .*\K\((SSL_accept|gnutls_handshake)\): timed out/(tls lib accept fn): timed out/;
+ s/TLS error on connection from .*\K(SSL_accept: TCP connection closed by peer|\(gnutls_handshake\): The TLS connection was non-properly terminated.)/(tls lib accept fn): TCP connection closed by peer/;
+ s/TLS session: \K\(gnutls_handshake\): rxd alert: No supported application protocol could be negotiated/(SSL_connect): error: <<detail omitted>>/;
+ s/\(gnutls_handshake\): No common application protocol could be negotiated./(SSL_accept): error: <<detail omitted>>/;
+
+ # Not all buildfarm animals have ipv6
+ next if /<dns:fail> <DNS_(?:NOMATCH|AGAIN):.*:AAAA>$/ ;
}
# ======== mail ========
<IN>;
<IN>;
}
+ elsif ( /^(\s+)t=([0-9]*); b=[A-Za-z0-9+\/]+$/ )
+ {
+ my $indent = $1;
+ s/.*/${indent}t=T; b=bbbb;/;
+ <IN>;
+ <IN>;
+ }
+
+ # Not all builds include EXPERIMENTAL_DSN_INFO (2 of 2)
+ if (/^X-Exim-Diagnostic:/)
+ {
+ while (<IN>) {
+ last if (/^$/ || !/^\s/);
+ }
+ goto RESET_AFTER_EXTRA_LINE_READ;
+ }
}
# ======== All files other than stderr ========
for (my $i = 0; $i < @munged; $i++)
{
- if ($munged[$i] =~ /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/)
+ if ($munged[$i] =~ /^[-\d]{10}\s[:\d]{8}(\.\d{3})?\s[-A-Za-z\d]{23}\s[-=*]>/)
{
my $j;
for ($j = $i + 1; $j < @munged; $j++)
{
last if $munged[$j] !~
- /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/;
+ /^[-\d]{10}\s[:\d]{8}(\.\d{3})?\s[-A-Za-z\d]{23}\s[-=*]>/;
}
@temp = splice(@munged, $i, $j - $i);
@temp = sort(@temp);
if (-s $mf)
{
my $sf = /^u/i ? $sf_current : $sf_flavour;
- tests_exit(-1, "Failed to cp $mf $sf") if system("cp '$mf' '$sf'") != 0;
+ copy($mf, $sf) or tests_exit(-1, "Failed to copy $mf $sf");
}
else
{
# Usable files are:
# paniclog, rejectlog, mainlog, stdout, stderr, msglog, mail
# Search strings starting with 's' do substitutions;
-# with '/' do line-skips.
+# with '/' do line-skips,
+# with 'R' run given code.
# Triggered by a scriptfile line "munge <name>"
##################################################
$munges =
'rejectlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /',
},
- 'debug_pid' =>
- { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d+/ppppp/g' },
-
'optional_dsn_info' =>
- { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
+ { 'mail' => 'Rif (/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/) {
+ while (1) {
+ $_ = <IN>;
+ next if /^ /;
+ goto RESET_AFTER_EXTRA_LINE_READ;
+ }
+ }'
},
'optional_config' =>
{ 'mainlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/',
'rejectlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/'},
- 'debuglog_stdout' =>
- { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //;
- s/Process \d+ is ready for new message/Process pppp is ready for new message/'
- },
-
'timeout_errno' => # actual errno differs Solaris vs. Linux
{ 'mainlog' => 's/((?:host|message) deferral .* errno) <\d+> /$1 <EEE> /' },
- 'peer_terminated_conn' => # actual error differs FreedBSD vs. Linux
+ 'peer_terminated_conn' => # actual error differs FreedBS/Solaris vs. Linux
{ 'stderr' => 's/^( SMTP\()Connection reset by peer(\)<<)$/$1closed$2/' },
'perl_variants' => # result of hash-in-scalar-context changed from bucket-fill to keycount
foreach $mail (@mails)
{
- next if $mail eq "test-mail/oncelog";
+ next if $mail =~ /^test-mail\/oncelog(.(dir|pag|db))?$/;
$saved_mail = substr($mail, 10); # Remove "test-mail/"
$saved_mail =~ s/^$parm_caller(\/|$)/CALLER/; # Convert caller name
foreach $msglog (@msglogs)
{
next if ($msglog eq "." || $msglog eq ".." || $msglog eq "CVS");
+
($munged_msglog = $msglog) =~
s/((?:[^\W_]{6}-){2}[^\W_]{2})
- /new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
+ /new_value($1, "10Hm%s-0005vi-00", \$next_msgid_old)/egx;
+
+ $munged_msglog =~
+ s/([^\W_]{6}-[^\W_]{11}-[^\W_]{4})
+ /new_value($1, "10Hm%s-000000005vi-0000", \$next_msgid)/egx;
+
$yield = max($yield, check_file("spool/msglog/$msglog", undef,
"test-msglog-munged", "msglog/$testno.$munged_msglog", 0,
$munge->{msglog}));
$prcmd =~ s/; /;\n>> /;
print ">> $prcmd\n";
}
-system("$cmd");
+system($cmd);
}
# Arguments: the current test number
# reference to the subtest number, holding previous value
# reference to the expected return code value
+# reference to flag for not-expected return value
# reference to where to put the command name (for messages)
# auxiliary information returned from a previous run
#
sub run_command{
my($testno) = $_[0];
my($subtestref) = $_[1];
-my($commandnameref) = $_[3];
-my($aux_info) = $_[4];
+my($commandnameref) = $_[4];
+my($aux_info) = $_[5];
my($yield) = 1;
our %ENV = map { $_ => $ENV{$_} } grep { /^(?:USER|SHELL|PATH|TERM|EXIM_TEST_.*)$/ } keys %ENV;
-if (/^(\d+)\s*$/) # Handle unusual return code
+if (/^(~)?(\d+)\s*(?:([A-Z]+)=(\S+))?$/) # Handle unusual return code
{
- my($r) = $_[2];
- $$r = $1 << 8;
+ my($r, $rn) = ($_[2], $_[3]);
+ $$r = $2 << 8;
+ $$rn = 1 if (defined $1);
+ $ENV{$3} = $4 if (defined $3);
$_ = <SCRIPT>;
return 4 if !defined $_; # Missing command
$lineno++;
###################
# The "dbmbuild" command runs exim_dbmbuild. This is used both to test the
-# utility and to make DBM files for testing DBM lookups.
+# utility and to make hintsdb files for testing hintsdb lookups.
if (/^dbmbuild\s+(\S+)\s+(\S+)/)
{
# The "dump" command runs exim_dumpdb. On different systems, the output for
# some types of dump may appear in a different order because it's just hauled
-# out of the DBM file. We can solve this by sorting. Ignore the leading
+# out of the hintsdb file. We can solve this by sorting. Ignore the leading
# date/time, as it will be flattened later during munging.
if (/^dump\s+(\S+)/)
sort { $a->[0] cmp $b->[0] }
#map { [ (split)[0] =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/gr, $_ ] } # this is too modern for 5.10.1
map {
- (my $k = (split)[0]) =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/g;
+ (my $k = (split)[0]) =~ s/\Q$parm_ipv4\E/ip4.ip4.ip4.ip4/g;
[ $k, $_ ]
}
do { local $/ = "\n "; <$in> };
return $aa cmp $bb;
} @temp;
}
+ elsif ($which eq "seen")
+ {
+ @temp = sort {
+ (my $aa = $a) =~ s/^([\d.]+)/$1/;
+ (my $bb = $b) =~ s/^([\d.]+)/$1/;
+ $aa =~ s/\Q$parm_ipv4\E/ip4.ip4.ip4.ip4/;
+ $bb =~ s/\Q$parm_ipv4\E/ip4.ip4.ip4.ip4/;
+ return $aa cmp $bb;
+ } @temp;
+ }
print $out @temp;
}
close($in); # close it explicitly, otherwise $? does not get set
}
+# The "exiqgrep" command runs exiqgrep on the current spool
+
+if (/^exiqgrep(\s+.*)?/)
+ {
+ run_system("(./eximdir/exiqgrep -E ./eximdir/exim -C $parm_cwd/test-config" . ($1 || '') . ";" .
+ "echo exiqgrep exit code = \$?)" .
+ ">>test-stdout");
+ return 1;
+ }
+
+
# The "eximstats" command runs eximstats on the current mainlog
if (/^eximstats\s+(.*)/)
}
+# The "exim_id_update" command runs exim_id_update on the current spool
+
+if (/^exim_id_update(\s+.*)?$/)
+ {
+ run_system("(sudo ./eximdir/exim_id_update" . ($1 || '') . " $parm_cwd/spool/input;" .
+ "echo exim_id_update exit code = \$?)" .
+ ">>test-stdout 2>>test-stderr");
+ return 1;
+ }
+
+
# The "gnutls" command makes a copy of saved GnuTLS parameter data in the
# spool directory, to save Exim from re-creating it each time.
# Various Unix management commands are recognized
if (/^(ln|ls|du|mkdir|mkfifo|touch|cp|cat)\s/ ||
- /^sudo\s(rmdir|rm|mv|chown|chmod)\s/)
+ /^sudo\s(mkdir|rmdir|rm|mv|cp|chown|chmod)\s/)
{
run_system("$_ >>test-stdout 2>>test-stderr");
return 1;
}
+if (/^cat2\s/)
+ {
+ s/^cat2/cat/;
+ run_system("$_ 2>&1 >test-stderr");
+ return 1;
+ }
if (/^client/ || /^(sudo\s+)?perl\b/)
{
+ if (defined($tls)) {
+ s/^client-anytls/client-ssl/ if ($tls eq 'openssl');
+ s/^client-anytls/client-gnutls/ if ($tls eq 'gnutls');
+ }
s"client"./bin/client";
$cmd = "$_ >>test-stdout 2>>test-stderr";
}
if (defined $queuespec)
{
- @listcmd = ("$parm_cwd/eximdir/exim", '-bp',
+ @listcmd = ("$parm_cwd/$exim_server", '-bp',
$queuespec,
- "-DEXIM_PATH=$parm_cwd/eximdir/exim",
+ "-DEXIM_PATH=$parm_cwd$exim_server",
-C => "$parm_cwd/test-config");
}
else
{
- @listcmd = ("$parm_cwd/eximdir/exim", '-bp',
- "-DEXIM_PATH=$parm_cwd/eximdir/exim",
+ @listcmd = ("$parm_cwd/$exim_server", '-bp',
+ "-DEXIM_PATH=$parm_cwd/$exim_server",
-C => "$parm_cwd/test-config");
}
print ">> Getting queue list from:\n>> @listcmd\n" if $debug;
my $opt_valgrind = $valgrind ? "valgrind --leak-check=yes --suppressions=$parm_cwd/aux-fixed/valgrind.supp " : '';
- $cmd = "$envset$sudo$opt_valgrind" .
- "$parm_cwd/eximdir/exim$special$optargs " .
- "-DEXIM_PATH=$parm_cwd/eximdir/exim$special " .
- "-C $parm_cwd/test-config $args " .
+ $cmd = "$envset$sudo$opt_valgrind";
+
+ if ($special ne '') {
+ $cmd .= "$parm_cwd/eximdir/exim$special$optargs " .
+ "-DEXIM_PATH=$parm_cwd/eximdir/exim$special ";
+ }
+ elsif ($args =~ /(^|\s)-DSERVER=server\s/) {
+ $cmd .= "$parm_cwd/$exim_server$optargs " .
+ "-DEXIM_PATH=$parm_cwd/$exim_server ";
+ }
+ else {
+ $cmd .= "$parm_cwd/$exim_client$optargs " .
+ "-DEXIM_PATH=$parm_cwd/$exim_client ";
+ }
+
+ $cmd .= "-C $parm_cwd/test-config $args " .
">>test-stdout 2>>test-stderr";
+
# If the command is starting an Exim daemon, we run it in the same
# way as the "server" command above, that is, we don't want to wait
# for the process to finish. That happens when "killdaemon" is obeyed later
# Run the command, with stdin connected to a pipe, and write the stdin data
-# to it, with appropriate substitutions. If a line ends with \NONL\, chop off
-# the terminating newline (and the \NONL\). If the command contains
+# to it, with appropriate substitutions. If a starts with '>>> ', process it
+# via Perl's string eval().
+# If the command contains
# -DSERVER=server add "-server" to the command, where it will adjoin the name
# for the stderr file. See comment above about the use of -DSERVER.
open CMD, "|${cmd}${stderrsuffix}" || tests_exit(1, "Failed to run $cmd");
CMD->autoflush(1);
-while (<SCRIPT>)
+LINE: while (<SCRIPT>)
{
$lineno++;
last if /^\*{4}\s*$/;
do_substitute($testno);
- if (/^(.*)\\NONL\\\s*$/) { print CMD $1; } else { print CMD; }
+ if (my ($cmd, $line) = /^(:\S+?:)(.*)/) {
+ $_ = $line;
+ {
+ $cmd eq ':eval:' and do {
+ $_ = eval "\"$_\"";
+ last;
+ };
+ $cmd eq ':noeol:' and do {
+ s/[\r\n]*$//;
+ last;
+ };
+ $cmd eq ':sleep:' and do {
+ sleep $_;
+ next LINE;
+ };
+ }
+ }
+ print CMD;
}
# For timeout tests, wait before closing the pipe; we expect a
+###############################################################################
+###############################################################################
+
+##################################################
+# Check for SpamAssassin and ClamAV #
+##################################################
+
+# These are crude tests. If they aren't good enough, we'll have to improve
+# them, for example by actually passing a message through spamc or clamscan.
+
+sub check_running_spamassassin
+{
+my $sock = new FileHandle;
+
+if (system("spamc -h 2>/dev/null >/dev/null") == 0)
+ {
+ print "The spamc command works:\n";
+
+ # This test for an active SpamAssassin is courtesy of John Jetmore.
+ # The tests are hard coded to localhost:783, so no point in making
+ # this test flexible like the clamav test until the test scripts are
+ # changed. spamd doesn't have the nice PING/PONG protocol that
+ # clamd does, but it does respond to errors in an informative manner,
+ # so use that.
+
+ my($sint,$sport) = ('127.0.0.1',783);
+ eval
+ {
+ my $sin = sockaddr_in($sport, inet_aton($sint))
+ or die "** Failed packing $sint:$sport\n";
+ socket($sock, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
+ or die "** Unable to open socket $sint:$sport\n";
+
+ local $SIG{ALRM} =
+ sub { die "** Timeout while connecting to socket $sint:$sport\n"; };
+ alarm(5);
+ connect($sock, $sin)
+ or die "** Unable to connect to socket $sint:$sport\n";
+ alarm(0);
+
+ select((select($sock), $| = 1)[0]);
+ print $sock "bad command\r\n";
+
+ $SIG{ALRM} =
+ sub { die "** Timeout while reading from socket $sint:$sport\n"; };
+ alarm(10);
+ my $res = <$sock>;
+ alarm(0);
+
+ $res =~ m|^SPAMD/|
+ or die "** Did not get SPAMD from socket $sint:$sport. "
+ ."It said: $res\n";
+ };
+ alarm(0);
+ if($@)
+ {
+ print " $@";
+ print " Assume SpamAssassin (spamd) is not running\n";
+ }
+ else
+ {
+ $parm_running{SpamAssassin} = ' ';
+ print " SpamAssassin (spamd) seems to be running\n";
+ }
+ }
+else
+ {
+ print "The spamc command failed: assume SpamAssassin (spamd) is not running\n";
+ }
+}
+
+sub check_running_clamav
+{
+my $sock;
+
+# For ClamAV, we need to find the clamd socket for use in the Exim
+# configuration. Search for the clamd configuration file.
+
+if (system("clamscan -h 2>/dev/null >/dev/null") == 0)
+ {
+ my($f, $clamconf, $test_prefix);
+
+ print "The clamscan command works";
+
+ $test_prefix = $ENV{EXIM_TEST_PREFIX};
+ $test_prefix = '' if !defined $test_prefix;
+
+ foreach $f ("$test_prefix/etc/clamd.conf",
+ "$test_prefix/usr/local/etc/clamd.conf",
+ "$test_prefix/etc/clamav/clamd.conf", '')
+ {
+ if (-e $f)
+ {
+ $clamconf = $f;
+ last;
+ }
+ }
+
+ # Read the ClamAV configuration file and find the socket interface.
+
+ if ($clamconf ne '')
+ {
+ my $socket_domain;
+ open(IN, "$clamconf") || die "\n** Unable to open $clamconf: $!\n";
+ while (<IN>)
+ {
+ if (/^LocalSocket\s+(.*)/)
+ {
+ $parm_clamsocket = $1;
+ $socket_domain = AF_UNIX;
+ last;
+ }
+ if (/^TCPSocket\s+(\d+)/)
+ {
+ if (defined $parm_clamsocket)
+ {
+ $parm_clamsocket .= " $1";
+ $socket_domain = AF_INET;
+ last;
+ }
+ else
+ {
+ $parm_clamsocket = " $1";
+ }
+ }
+ elsif (/^TCPAddr\s+(\S+)/)
+ {
+ if (defined $parm_clamsocket)
+ {
+ $parm_clamsocket = $1 . $parm_clamsocket;
+ $socket_domain = AF_INET;
+ last;
+ }
+ else
+ {
+ $parm_clamsocket = $1;
+ }
+ }
+ }
+ close(IN);
+
+ if (defined $socket_domain)
+ {
+ print ":\n The clamd socket is $parm_clamsocket\n";
+ # This test for an active ClamAV is courtesy of Daniel Tiefnig.
+ eval
+ {
+ my $socket;
+ if ($socket_domain == AF_UNIX)
+ {
+ $socket = sockaddr_un($parm_clamsocket) or die "** Failed packing '$parm_clamsocket'\n";
+ }
+ elsif ($socket_domain == AF_INET)
+ {
+ my ($ca_host, $ca_port) = split(/\s+/,$parm_clamsocket);
+ my $ca_hostent = gethostbyname($ca_host) or die "** Failed to get raw address for host '$ca_host'\n";
+ $socket = sockaddr_in($ca_port, $ca_hostent) or die "** Failed packing '$parm_clamsocket'\n";
+ }
+ else
+ {
+ die "** Unknown socket domain '$socket_domain' (should not happen)\n";
+ }
+ socket($sock, $socket_domain, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
+ local $SIG{ALRM} = sub { die "** Timeout while connecting to socket '$parm_clamsocket'\n"; };
+ alarm(5);
+ connect($sock, $socket) or die "** Unable to connect to socket '$parm_clamsocket'\n";
+ alarm(0);
+
+ my $ofh = select $sock; $| = 1; select $ofh;
+ print $sock "PING\n";
+
+ $SIG{ALRM} = sub { die "** Timeout while reading from socket '$parm_clamsocket'\n"; };
+ alarm(10);
+ my $res = <$sock>;
+ alarm(0);
+
+ $res =~ /PONG/ or die "** Did not get PONG from socket '$parm_clamsocket'. It said: $res\n";
+ };
+ alarm(0);
+
+ if($@)
+ {
+ print " $@";
+ print " Assume ClamAV is not running\n";
+ }
+ else
+ {
+ $parm_running{ClamAV} = ' ';
+ print " ClamAV seems to be running\n";
+ }
+ }
+ else
+ {
+ print ", but the socket for clamd could not be determined\n";
+ print "Assume ClamAV is not running\n";
+ }
+ }
+
+ else
+ {
+ print ", but I can't find a configuration for clamd\n";
+ print "Assume ClamAV is not running\n";
+ }
+ }
+}
+
+
+sub check_running_redis
+{
+if (defined $parm_lookups{redis})
+ {
+ if (system("redis-server -v 2>/dev/null >/dev/null") == 0)
+ {
+ print "The redis-server command works\n";
+ $parm_running{redis} = ' ';
+ }
+ else
+ {
+ print "The redis-server command failed: assume Redis not installed\n";
+ }
+ }
+}
+
+sub check_running_dovecot
+{
+system('dovecot --version >/dev/null 2>&1');
+if ($? == 0)
+ {
+ print "Dovecot appears to be available\n";
+ $parm_running{dovecot} = ' ';
+ }
+else
+ {
+ print "Dovecot not found\n";
+ }
+}
+
+
+
###############################################################################
###############################################################################
'ipv6!' => \$have_ipv6,
'keep' => \$save_output,
'slow' => \$slow,
+ 'tls=s' => \my $tls,
'valgrind' => \$valgrind,
'range=s{2}' => \my @range_wanted,
'test=i@' => \my @tests_wanted,
+ 'fail-any!' => \my $fail_any,
'flavor|flavour=s' => \$flavour,
'help' => sub { pod2usage(-exit => 0) },
'man' => sub {
print "Exim binary is `$parm_exim'\n" if defined $parm_exim;
+my %wanted;
my @wanted = sort numerically uniq
@tests_wanted ? @tests_wanted : (),
@range_wanted ? $range_wanted[0] .. $range_wanted[1] : (),
0+$ARGV[0]..0+$ARGV[1] # add 0 to cope with test numbers starting with zero
: ();
@wanted = 1..TEST_TOP if not @wanted;
+map { $wanted{sprintf("%04d",$_)}= $_; } @wanted;
##################################################
# Check for sudo access to root #
chomp(my @eximinfo = `$eximinfo 2>&1`);
die "$0: Can't run $eximinfo\n" if $? == -1;
-warn 'Got ' . $?>>8 . " from $eximinfo\n" if $?;
+warn 'Got ' . ($?>>8) . " from $eximinfo\n" if $?;
foreach (@eximinfo)
{
if (my ($version) = /^Exim version (\S+)/) {
open(TCL, $parm_trusted_config_list) or die "Can't open $parm_trusted_config_list: $!\n";
my $test_config = getcwd() . '/test-config';
die "Can't find '$test_config' in TRUSTED_CONFIG_LIST $parm_trusted_config_list."
- if not grep { /^\Q$test_config\E$/ } <TCL>;
+ if not grep { /^\Q$test_config\E$/ } <TCL>;
}
else
{
}
elsif (/^Support for: (.*)/)
- {
+ { # Compile-time features - exim -bV
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
%parm_support = @temp;
}
- elsif (/^Lookups \(built-in\): (.*)/)
+ elsif (/^Lookups \((?:built-in|dynamic)\): ?(.*)/)
{
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
- %parm_lookups = @temp;
+ my %temp_lookups = @temp;
+ @parm_lookups{keys %temp_lookups} = values %temp_lookups;
}
- elsif (/^Authenticators: (.*)/)
+ elsif (/^Authenticators \((?:built-in|dynamic)\): ?(.*)/)
{
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
- %parm_authenticators = @temp;
+ my %temp_auths= @temp;
+ @parm_authenticators{keys %temp_auths} = values %temp_auths;
}
- elsif (/^Routers: (.*)/)
+ elsif (/^Routers \((?:built-in|dynamic)\): ?(.*)/)
{
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
- %parm_routers = @temp;
+ my %temp_routers = @temp;
+ @parm_routers{keys %temp_routers} = values %temp_routers;
}
# Some transports have options, e.g. appendfile/maildir. For those, ensure
# that the basic transport name is set, and then the name with each of the
# options.
- elsif (/^Transports: (.*)/)
+ elsif (/^Transports \((?:built-in|dynamic)\): (.*)/)
{
print;
@temp = split /(\s+)/, $1;
my($i,$k);
push(@temp, ' ');
- %parm_transports = @temp;
+ my %temp_transports = @temp;
+ @parm_transports{keys %temp_transports} = values %temp_transports;
+
foreach $k (keys %parm_transports)
{
if ($k =~ "/")
unlink("$parm_cwd/test-config");
-##################################################
-# Check for SpamAssassin and ClamAV #
-##################################################
-# These are crude tests. If they aren't good enough, we'll have to improve
-# them, for example by actually passing a message through spamc or clamscan.
if (defined $parm_support{Content_Scanning})
{
- my $sock = new FileHandle;
-
- if (system("spamc -h 2>/dev/null >/dev/null") == 0)
- {
- print "The spamc command works:\n";
-
- # This test for an active SpamAssassin is courtesy of John Jetmore.
- # The tests are hard coded to localhost:783, so no point in making
- # this test flexible like the clamav test until the test scripts are
- # changed. spamd doesn't have the nice PING/PONG protocol that
- # clamd does, but it does respond to errors in an informative manner,
- # so use that.
-
- my($sint,$sport) = ('127.0.0.1',783);
- eval
- {
- my $sin = sockaddr_in($sport, inet_aton($sint))
- or die "** Failed packing $sint:$sport\n";
- socket($sock, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
- or die "** Unable to open socket $sint:$sport\n";
-
- local $SIG{ALRM} =
- sub { die "** Timeout while connecting to socket $sint:$sport\n"; };
- alarm(5);
- connect($sock, $sin)
- or die "** Unable to connect to socket $sint:$sport\n";
- alarm(0);
-
- select((select($sock), $| = 1)[0]);
- print $sock "bad command\r\n";
-
- $SIG{ALRM} =
- sub { die "** Timeout while reading from socket $sint:$sport\n"; };
- alarm(10);
- my $res = <$sock>;
- alarm(0);
-
- $res =~ m|^SPAMD/|
- or die "** Did not get SPAMD from socket $sint:$sport. "
- ."It said: $res\n";
- };
- alarm(0);
- if($@)
- {
- print " $@";
- print " Assume SpamAssassin (spamd) is not running\n";
- }
- else
- {
- $parm_running{SpamAssassin} = ' ';
- print " SpamAssassin (spamd) seems to be running\n";
- }
- }
- else
- {
- print "The spamc command failed: assume SpamAssassin (spamd) is not running\n";
- }
-
- # For ClamAV, we need to find the clamd socket for use in the Exim
- # configuration. Search for the clamd configuration file.
-
- if (system("clamscan -h 2>/dev/null >/dev/null") == 0)
- {
- my($f, $clamconf, $test_prefix);
-
- print "The clamscan command works";
-
- $test_prefix = $ENV{EXIM_TEST_PREFIX};
- $test_prefix = '' if !defined $test_prefix;
-
- foreach $f ("$test_prefix/etc/clamd.conf",
- "$test_prefix/usr/local/etc/clamd.conf",
- "$test_prefix/etc/clamav/clamd.conf", '')
- {
- if (-e $f)
- {
- $clamconf = $f;
- last;
- }
- }
-
- # Read the ClamAV configuration file and find the socket interface.
-
- if ($clamconf ne '')
- {
- my $socket_domain;
- open(IN, "$clamconf") || die "\n** Unable to open $clamconf: $!\n";
- while (<IN>)
- {
- if (/^LocalSocket\s+(.*)/)
- {
- $parm_clamsocket = $1;
- $socket_domain = AF_UNIX;
- last;
- }
- if (/^TCPSocket\s+(\d+)/)
- {
- if (defined $parm_clamsocket)
- {
- $parm_clamsocket .= " $1";
- $socket_domain = AF_INET;
- last;
- }
- else
- {
- $parm_clamsocket = " $1";
- }
- }
- elsif (/^TCPAddr\s+(\S+)/)
- {
- if (defined $parm_clamsocket)
- {
- $parm_clamsocket = $1 . $parm_clamsocket;
- $socket_domain = AF_INET;
- last;
- }
- else
- {
- $parm_clamsocket = $1;
- }
- }
- }
- close(IN);
-
- if (defined $socket_domain)
- {
- print ":\n The clamd socket is $parm_clamsocket\n";
- # This test for an active ClamAV is courtesy of Daniel Tiefnig.
- eval
- {
- my $socket;
- if ($socket_domain == AF_UNIX)
- {
- $socket = sockaddr_un($parm_clamsocket) or die "** Failed packing '$parm_clamsocket'\n";
- }
- elsif ($socket_domain == AF_INET)
- {
- my ($ca_host, $ca_port) = split(/\s+/,$parm_clamsocket);
- my $ca_hostent = gethostbyname($ca_host) or die "** Failed to get raw address for host '$ca_host'\n";
- $socket = sockaddr_in($ca_port, $ca_hostent) or die "** Failed packing '$parm_clamsocket'\n";
- }
- else
- {
- die "** Unknown socket domain '$socket_domain' (should not happen)\n";
- }
- socket($sock, $socket_domain, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
- local $SIG{ALRM} = sub { die "** Timeout while connecting to socket '$parm_clamsocket'\n"; };
- alarm(5);
- connect($sock, $socket) or die "** Unable to connect to socket '$parm_clamsocket'\n";
- alarm(0);
-
- my $ofh = select $sock; $| = 1; select $ofh;
- print $sock "PING\n";
-
- $SIG{ALRM} = sub { die "** Timeout while reading from socket '$parm_clamsocket'\n"; };
- alarm(10);
- my $res = <$sock>;
- alarm(0);
-
- $res =~ /PONG/ or die "** Did not get PONG from socket '$parm_clamsocket'. It said: $res\n";
- };
- alarm(0);
-
- if($@)
- {
- print " $@";
- print " Assume ClamAV is not running\n";
- }
- else
- {
- $parm_running{ClamAV} = ' ';
- print " ClamAV seems to be running\n";
- }
- }
- else
- {
- print ", but the socket for clamd could not be determined\n";
- print "Assume ClamAV is not running\n";
- }
- }
-
- else
- {
- print ", but I can't find a configuration for clamd\n";
- print "Assume ClamAV is not running\n";
- }
- }
- }
-
-
-##################################################
-# Check for redis #
-##################################################
-if (defined $parm_lookups{redis})
- {
- if (system("redis-server -v 2>/dev/null >/dev/null") == 0)
- {
- print "The redis-server command works\n";
- $parm_running{redis} = ' ';
- }
- else
- {
- print "The redis-server command failed: assume Redis not installed\n";
- }
+ check_running_spamassassin();
+ check_running_clamav();
}
+check_running_redis();
+check_running_dovecot();
##################################################
# Test for the basic requirements #
die "** Unable to make patched exim: $!\n"
if (system("sudo ./patchexim $parm_exim") != 0);
+# If TLS-library-specific binaries have been made, grab them too
+
+$suff = 'openssl';
+$f = $parm_exim . '_' . $suff;
+if (-f $f) {
+ $exim_openssl = "eximdir/exim_$suff";
+ die "** Unable to make patched exim: $!\n"
+ if (system("sudo ./patchexim -o $exim_openssl $f") != 0);
+ }
+$suff = 'gnutls';
+$f = $parm_exim . '_' . $suff;
+if (-f $f) {
+ $exim_gnutls = "eximdir/exim_$suff";
+ die "** Unable to make patched exim: $!\n"
+ if (system("sudo ./patchexim -o $exim_gnutls $f") != 0);
+ }
+
+if (defined($tls))
+ {
+ die "** Need both $exim_openssl and $exim_gnutls for cross-library teting\n"
+ if ( !defined($exim_openssl) || !defined($exim_gnutls) );
+ if ($tls eq 'openssl')
+ {
+ $exim_client = $exim_openssl;
+ $exim_server = $exim_gnutls;
+ }
+ elsif ($tls eq 'gnutls')
+ {
+ $exim_client = $exim_gnutls;
+ $exim_server = $exim_openssl;
+ }
+ else
+ { die "** need eother openssl or gnutls speified as the client for cross-library testing, saw $tls\n"; }
+ }
+else
+ { $exim_client = $exim_server = 'eximdir/exim'; }
+print ">> \$exim_client <$exim_client>\n";;
+print ">> \$exim_server <$exim_server>\n";;
+
# From this point on, exits from the program must go via the subroutine
# tests_exit(), so that suitable cleaning up can be done when required.
# Arrange to catch interrupting signals, to assist with this.
"sudo chgrp $parm_eximgroup eximdir/exim_exim;" .
"sudo chmod 06755 eximdir/exim_exim");
+# Copy any libraries that were built for dynamic load
+
+($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?;
+
+while (my $file = glob("$parm_exim_dir/dynmodules/*.so")) {
+ my $base = basename($file);
+ cp("$file", "eximdir/");
+ system("sudo chmod 755 eximdir/$base");
+ }
+
##################################################
# Make copies of utilities we might need #
##################################################
# Certain of the tests make use of some of Exim's utilities. We do not need
# to be root to copy these.
-($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?;
-
$dbm_build_deleted = 0;
-if (defined $parm_lookups{dbm} &&
- system("cp $parm_exim_dir/exim_dbmbuild eximdir") != 0)
+if (defined $parm_lookups{dbm} && not cp("$parm_exim_dir/exim_dbmbuild", "eximdir/exim_dbmbuild"))
{
delete $parm_lookups{dbm};
$dbm_build_deleted = 1;
}
-if (system("cp $parm_exim_dir/exim_dumpdb eximdir") != 0)
- {
- tests_exit(-1, "Failed to make a copy of exim_dumpdb: $!");
- }
-
-if (system("cp $parm_exim_dir/exim_lock eximdir") != 0)
- {
- tests_exit(-1, "Failed to make a copy of exim_lock: $!");
- }
-
-if (system("cp $parm_exim_dir/exinext eximdir") != 0)
- {
- tests_exit(-1, "Failed to make a copy of exinext: $!");
- }
-
-if (system("cp $parm_exim_dir/exigrep eximdir") != 0)
- {
- tests_exit(-1, "Failed to make a copy of exigrep: $!");
- }
-
-if (system("cp $parm_exim_dir/eximstats eximdir") != 0)
- {
- tests_exit(-1, "Failed to make a copy of eximstats: $!");
- }
+foreach my $tool (qw(exim_dumpdb exim_lock exinext exigrep eximstats exiqgrep exim_msgdate exim_id_update)) {
+ cp("$parm_exim_dir/$tool" => "eximdir/$tool")
+ or tests_exit(-1, "Failed to make a copy of $tool: $!");
+}
# Collect some version information
print '-' x 78, "\n";
print "Perl version for runtest: $]\n";
-foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats)) {
+foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats exiqgrep exim_msgdate)) {
# fold (or unfold?) multiline output into a one-liner
print join(', ', map { chomp; $_ } `$_ --version`), "\n";
}
{
if (!defined $parm_malware{$1}) { $wantthis = 0; last; }
}
- elsif (/^feature (.*)$/)
- {
+ elsif (/^(not )?feature (.*)$/)
+ { #a macro name, or lack thereof - -bP macros
# move to a subroutine?
- my $eximinfo = "$parm_exim -C $parm_cwd/test-config -DDIR=$parm_cwd -bP macro $1";
+ my $eximinfo = "$parm_exim -C $parm_cwd/test-config -DDIR=$parm_cwd -bP macro $2";
open (IN, "$parm_cwd/confs/0000") ||
tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
close(OUT);
system($eximinfo . " >/dev/null 2>&1");
- if ($? != 0) {
- unlink("$parm_cwd/test-config");
+ if (!defined $1 && $? != 0 || defined $1 && $? == 0) {
$wantthis = 0;
- $_ = "feature $1";
+ unlink("$parm_cwd/test-config");
+ $_ = $1 || "" . "feature $2";
last;
}
unlink("$parm_cwd/test-config");
# We want the tests from this subdirectory, provided they are in the
# range that was selected.
- @testlist = grep { $_ ~~ @wanted } grep { /^\d+(?:\.\d+)?$/ } map { basename $_ } glob "scripts/$testdir/*";
+ undef @testlist;
+ map { push @testlist, $_ if exists $wanted{$_} } grep { /^\d+(?:\.\d+)?$/ } map { basename $_ } glob "scripts/$testdir/*";
+
tests_exit(-1, "Failed to read test scripts from `scripts/$testdir/*': $!")
if not @testlist;
$" = ' ';
}
+ my $testnum = 0;
+ if ($file =~ /^(\d+)/) { $testnum = $1; }
+
print ">>Copying $basedir-src/$file to $basedir/$outfile\n" if $debug;
open(IN, "$parm_cwd/$basedir-src/$file") ||
tests_exit(-1, "Failed to open $parm_cwd/$basedir-src/$file: $!");
tests_exit(-1, "Failed to open $parm_cwd/$basedir/$outfile: $!");
while (<IN>)
{
- do_substitute(0);
+ do_substitute($testnum);
print OUT;
}
close(IN);
}
+my $failures = 0;
foreach $test (@test_list)
{
state $lasttestdir = '';
# the test-mail directory for appendfile deliveries.
system "sudo /bin/rm -rf spool test-*";
- system "mkdir test-mail 2>/dev/null";
+ mkdir "test-mail";
# A privileged Exim will normally make its own spool directory, but some of
# the tests run in unprivileged modes that don't always work if the spool
# directory isn't already there. What is more, we want anybody to be able
# to read it in order to find the daemon's pid.
- system "mkdir spool; " .
- "sudo chown $parm_eximuser:$parm_eximgroup spool; " .
+ mkdir "spool";
+ system "sudo chown $parm_eximuser:$parm_eximgroup spool; " .
"sudo chmod 0755 spool";
# Empty the cache that keeps track of things like message id mappings, and
# set up the initial sequence strings.
undef %cache;
+ $next_msgid_old = "aX";
$next_msgid = "aX";
$next_pid = 1234;
$next_port = 1111;
+ $next_conn = 1111;
$message_skip = 0;
$msglog_skip = 0;
+ $munge_skip = 0;
$stderr_skip = 0;
$stdout_skip = 0;
$rmfiltertest = 0;
{
if (/^no_message_check/) { $message_skip = 1; next; }
if (/^no_msglog_check/) { $msglog_skip = 1; next; }
+ if (/^no_munge/) { $munge_skip = 1; next; }
if (/^no_stderr_check/) { $stderr_skip = 1; next; }
if (/^no_stdout_check/) { $stdout_skip = 1; next; }
if (/^rmfiltertest/) { $rmfiltertest = 1; next; }
# set above, but doesn't hurt to leave them here.
if (/^no_message_check/) { $message_skip = 1; next; }
if (/^no_msglog_check/) { $msglog_skip = 1; next; }
+ if (/^no_munge/) { $munge_skip = 1; next; }
if (/^no_stderr_check/) { $stderr_skip = 1; next; }
if (/^no_stdout_check/) { $stdout_skip = 1; next; }
if (/^rmfiltertest/) { $rmfiltertest = 1; next; }
# was run and not waited for (usually a daemon or server startup).
my($commandname) = '';
- my($expectrc) = 0;
- my($rc, $run_extra) = run_command($testno, \$subtestno, \$expectrc, \$commandname, $TEST_STATE);
+ my($expectrc, $expect_not) = (0, 0);
+ my($rc, $run_extra) = run_command($testno, \$subtestno, \$expectrc, \$expect_not, \$commandname, $TEST_STATE);
my($cmdrc) = $?;
if ($debug) {
# We ran and waited for a command. Check for the expected result unless
# it died.
- if ($cmdrc != $expectrc && !$sigpipehappened)
+ if (!$sigpipehappened && ($expect_not ? ($cmdrc == $expectrc) : ($cmdrc != $expectrc)))
{
printf("** Command $commandno (\"$commandname\", starting at line $subtest_startline)\n");
if (($cmdrc & 0xff) == 0)
{
- printf("** Return code %d (expected %d)", $cmdrc/256, $expectrc/256);
+ if ($expect_not)
+ { printf("** Return code %d (expected anything but that)", $cmdrc/256); }
+ else
+ { printf("** Return code %d (expected %d)", $cmdrc/256, $expectrc/256); }
}
elsif (($cmdrc & 0xff00) == 0)
{ printf("** Killed by signal %d", $cmdrc & 255); }
print "\nshow stdErr, show stdOut, Retry, Continue (without file comparison), or Quit? [Q] ";
$_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
- if (/^c$/ && $force_continue) {
- log_failure($log_failed_filename, $testno, "exit code unexpected");
- log_test($log_summary_filename, $testno, 'F')
- }
+ if (/^c$/ && $force_continue)
+ {
+ log_failure($log_failed_filename, $testno, "exit code unexpected");
+ log_test($log_summary_filename, $testno, 'F');
+ $failures++;
+ }
if ($force_continue)
{
print "\nstdout tail:\n";
{
if (($? & 0xff) == 0)
{ printf("Server return code %d for test %d starting line %d", $?/256,
- $testno, $subtest_startline); }
+ $testno, $subtest_startline); }
elsif (($? & 0xff00) == 0)
{ printf("Server killed by signal %d", $? & 255); }
else
print "\nShow server stdout, Retry, Continue, or Quit? [Q] ";
$_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
- if (/^c$/ && $force_continue) {
- log_failure($log_failed_filename, $testno, "exit code unexpected");
- log_test($log_summary_filename, $testno, 'F')
- }
+ if (/^c$/ && $force_continue)
+ {
+ log_failure($log_failed_filename, $testno, "exit code unexpected");
+ log_test($log_summary_filename, $testno, 'F');
+ $failures++;
+ }
print "... continue forced\n" if $force_continue;
last if /^[rc]$/i;
{
sleep 1 if $slow;
my $rc = check_output($TEST_STATE->{munge});
- log_test($log_summary_filename, $testno, 'P') if ($rc == 0);
+ if ($rc == 0)
+ {
+ log_test($log_summary_filename, $testno, 'P');
+ }
+ else
+ {
+ $failures++;
+ }
if ($rc < 2)
{
print (" Script completed\n");
##################################################
tests_exit(-1, "No runnable tests selected") if not @test_list;
-tests_exit(0);
+tests_exit($fail_any ? $failures : 0);
__END__
=cut
+# vi: aw ai sw=2
# End of runtest script
git://git.exim.org / exim.git / blobdiff