Exim version 4.98
-----------------
+JH/01 Use fewer forks & execs for sending many messages to a single host.
+ By passing back more info from the transport to the delivery process,
+ we can loop there. A two-phase queue run will benefit, particularly for
+ mailinglist and smarthost cases.
+
+JH/02 Add transaction support for hintsdbs. The providers supported are tdb and
+ sqlite. Transactions are used for the wait-transport and retry DBs.
+ They imply locking internal to the DB. We no longer need a separate
+ lockfile, can keep the DB handle open for extended periods, yet
+ potentially benefit from concurrency on non-conflicting record uses.
+
+JH/03 With dkim_verify_minimal, avoid calling the DKIM ACL after the first
+ good verify.
+
+JH/04 Remove the docs and support scripts dealing with conversion of Exim
+ version 3 installations.
+
+JH/05 Fix hintsdb support for dbmjz when compiled using sqlite3. Previously
+ the backend support assumed keys would be simple C strings, but dbmjz
+ uses keys with embedded NUL bytes. The builtin hintsdb use is unaffected,
+ but installations using dbmjz will need to rebuild those DBs.
+
+JH/06 Bug 1141: When operating a continued-connection transport, verify that
+ the interface option, if specified, evaluates to match the connection.
+ Previously, a queued message for the same host was sent without checking.
+
+JH/07 Bug 3106: Fix coding in SPA authenticator. A macro argument was not
+ properly parenthesized, resulting in a logic error. While the simple
+ fix was provided by Andrew Aitchison, the over-large code block resulting
+ from this macro made me want to replace it with a real function so more
+ extensive rework becamse needed.
+
+JH/08 The output of "exim -bV" now includes lookup types built as dynamic-load
+ modules.
+
+JH/09 Not a change, but worthy of note: There is no test coverage of the
+ heimdall-gssapi authenticator driver. It does build, though with (on at
+ least one platform) library version conflicts with the gsasl auth
+ driver). Confidence in its operation is lacking.
+
+JH/10 Bug 3108: On platforms not providing strchrnul() [OpenBSD] supply a proper
+ prototype (as well as implementaton). Previously, a return type "int"
+ was assumed, resulting in type-conversion bugs when int and pointer had
+ different size. This resulted in crashes while processing DKIM signatures
+ of received messages. Identification and fix from Qualys Security.
+
+JH/11 Lookups built as dynamic-load modules which support a single lookup
+ type are now only loaded if required by the config. Previously all lookup
+ modules present in the modules directory were loaded; this now applies
+ only to those supporting multiple types.
+
+JH/12 Bug 3112: Fix logging of config-file position for "obsolete lookup
+ syntax". Previously, the end of the top-level file was reported.
+
+JH/13 Bug 3120: Fix parsing of DKIM pubkey DNS record. Previously a crafted
+ record could crash the meesage recieve process. Investigation by
+ Maxim Galaganov.
+
+Exim version 4.98
+-----------------
+
JH/01 Support list of dkim results in the dkim_status ACL condition, making
it more usable in the data ACL.
loggging reception and sending the SMTP ack. Previously we only flushed
the stdio buffer so there was still the possibility of a disk error.
-JH/14 Bug 3061: Avoid a split log line when trtying to rewrite a malformed
+JH/14 Bug 3061: Avoid a split log line when trying to rewrite a malformed
address. Previously, for the last address in a header line (commonly
there is only one) the terminating newline was part of the logged
information.
in exiwhat output.
JH/17 Bug 3064: Fix combination of "-q<period> -R <recipients>". Introduction of
- the multiple-queue-runners facility for 4.97 broking this, giving only
- a one-time run of the queue.
+ the multiple-queue-runners facility for 4.97 broke this, giving only a
+ one-time run of the queue.
JH/18 Bug 3068: Log a warning for use of deprecated syntax in query-style
lookups.
JH/19 Fix TLS startup. When the last expansion done before the initiation of a
TLS session resulted in a forced-fail, a misleading error was logged for
the expansino of tls_certificates. This would affect the common case of
- that option being set (main-section options) but not having any vriable
+ that option being set (main-section options) but not having any variable
parts. It could also potentially affect tls_privatekeys. The underlyding
coding errors go back to 4.90 but were only exposed in 4.97.
when a user had over 104207 messages stored and the appendfile
maildir_quota_directory_regex option is in use. Release the allocated
memory every thosand files to avoid this.
+ The same issue arises with the ACL regex condition, which is applied
+ to every line of a received message.
+
+JH/21 Bug 3059: Fix crash in smtp transport. When running for a message for
+ which all recipients had been handled (itself an issue) a null-pointer
+ deref was done on trying to write a retry record. Fix that by counting
+ the outstanding recipients before trying to transmit the message.
+ The situation arose for a second MX try within a transport run, when the
+ first had perm-rejected a recipient (the only one for the connection, in
+ the case seen) during pipelining, and then closed the TCP connection.
+ The transport classified that as an I/O error, leaving the message
+ outstanding but having marked up the recipient as dealt-with. It then
+ tried another MX because of the I/O error. Fix this by converting the
+ message-level status to ok if there was a close but all recipients were
+ dealt with. Thanks to Wolfgand Breyha for debug runs.
+
+JH/22 The ESMTP_LIMITS facility (RFC 9422) is promoted from experimental status
+ and is now controlled by the build-time option DISABLE_ESMTP_LIMITS.
+
+JH/23 Bug 3066: Avoid leaking lookup database credentials to log.
+
+JH/24 Bug 3081: Fix a delivery process crash. When the router "errors_to"
+ option specified a fixed address, later rewriting on that address would
+ trip on the configuration data being readonly. Instead of modifying
+ in-place, copy data. Found and fixed by Peter Benie.
+
+JH/25 Bug 3079: Fix crash in dbmnz. When a key was present for zero-length
+ data a null pointer was followed. Find and testcase by Sebastian Bugge.
+
+JH/26 Fix encoding for an AUTH parameter on a MAIL FROM command. Previously
+ decimal 127 chars were not encoded, and lowercase hex was used for
+ encoded values. Outstanding since at least 1999.
+
+JH/27 Fix crash in logging. When a message with a large number of recipients
+ had been received, and logging of recipients is enabled, the buffer used
+ for logging could reach limit. A read using a null pointer would then
+ be done, resulting in a crash of the receiving process before an SMTP
+ ACK for the message was returned to the sending system. Duplicate
+ messages were created as a result.
+ Find and debug help by Mateusz Krawczyk
+
+JH/28 Bug 3086: Fix exinext for ipv6. Change the format of keys in the retry
+ DB, wrapping transport record bare-ip "host names" and ipv6
+ "host addresses" in square-brackets. This makes the parsing that
+ exinext does more reliable.
+
+JH/29 Bug 3087: Fix SRS encode. A zero-length quoted element in the local-part
+ would cause a crash.
+
+JH/30 Bug 3029: Avoid feeding Resent-From: to DMARC.
+
+JH/31 Bug 3027: For -bh / -bhc tests change to using the compressed form of
+ ipv6 addresses for the sender. Previously the uncompressed form was used,
+ and if used in textual form this would result in behavior difference
+ versus non-bh.
+
+JH/32 Bug 3096: MAIL before HELO/EHLO, where required by hosts_require_helo, is
+ now classed as a protocol error and subject to smtp_max_synprot_errors.
+
+JH/33 Bug 2994: A subdir dsearch lookup should permit a directory name that starts
+ ".." and has following characters.
+
+JH/34 Fix delivery ordering for 2-phase queue run combined with
+ queue_run_in_order.
+
+JH/35 Bug 3099: fix parsing of MIME filename= split over multiple paramemters.
+ Previously the $mime_filename variable would have an incorrect value.
+ While in the code, extend coverage to name= which previously was only
+ supported for single parameters, despite also filling in $mime_filename.
Exim version 4.97
mx_fail_domains.
JH/45 Use a (new) separate store pool-pair for DKIM verify working data.
- Previously the permanent pool was used, so the sore could not be freed.
+ Previously the permanent pool was used, so the store could not be freed.
This meant a connection with many messages would use continually-growing
memory.
git://git.exim.org / exim.git / blobdiff