Doc: parallel builds (make -j) work

[exim.git] / doc / doc-txt / NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index 37368ac4d69bf1f4c63a2f3a38332a5734da65ff..a0002b620e1fc5267a0a8a71e4410c6f16080b69 100644 (file)
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -1,5 +1,3 @@
-$Cambridge: exim/doc/doc-txt/NewStuff,v 1.144 2007/03/13 11:06:48 ph10 Exp $
-

 New Features in Exim
 --------------------
 
 New Features in Exim
 --------------------
 


@@ -8,392 +6,855 @@ Before a formal release, there may be quite a lot of detail so that people can
 test from the snapshots or the CVS before the documentation is updated. Once
 the documentation is updated, this file is reduced to a short list.
 
 test from the snapshots or the CVS before the documentation is updated. Once
 the documentation is updated, this file is reduced to a short list.
 

-Version 4.67
+Version 4.86

 ------------
 
 ------------
 

- 1. There is a new log selector called smtp_no_mail, which is not included in
-    the default setting. When it is set, a line is written to the main log
-    whenever an accepted SMTP connection terminates without having issued a
-    MAIL command. This includes both the case when the connection is dropped,
-    and the case when QUIT is used. Note that it does not include cases where
-    the connection is rejected right at the start (by an ACL, or because there
-    are too many connections, or whatever). These cases already have their own
-    log lines.
-
-    The log line that is written contains the identity of the client in the
-    usual way, followed by D= and a time, which records the duration of the
-    connection. If the connection was authenticated, this fact is logged
-    exactly as it is for an incoming message, with an A= item. If the
-    connection was encrypted, CV=, DN=, and X= items may appear as they do for
-    an incoming message, controlled by the same logging options.
-
-    Finally, if any SMTP commands were issued during the connection, a C= item
-    is added to the line, listing the commands that were used. For example,
-
-      C=EHLO,QUIT
-
-    shows that the client issued QUIT straight after EHLO. If there were fewer
-    than 20 commands, they are all listed. If there were more than 20 commands,
-    the last 20 are listed, preceded by "...". However, with the default
-    setting of 10 for smtp_accep_max_nonmail, the connection will in any case
-    be aborted before 20 non-mail commands are processed.
+ 1. Support for using the system standard CA bundle.

 
 

- 2. When an item in a dnslists list is followed by = and & and a list of IP
-    addresses, in order to restrict the match to specific results from the DNS
-    lookup, the behaviour was not clear when the lookup returned more than one
-    IP address. For example, consider the condition
+ 2. New expansion items $config_file, $config_dir, containing the file
+    and directory name of the main configuration file. Also $exim_version.

 
 

-      dnslists = a.b.c=127.0.0.1
+ 3. New "malware=" support for Avast.

 
 

-    What happens if the DNS lookup for the incoming IP address yields both
-    127.0.0.1 and 127.0.0.2 by means of two separate DNS records? Is the
-    condition true because at least one given value was found, or is it false
-    because at least one of the found values was not listed? And how does this
-    affect negated conditions?
+ 4. New "spam=" variant option for Rspamd.

 
 

-    The behaviour of = and & has not been changed; however, the text below
-    documents it more clearly. In addition, two new additional conditions (==
-    and =&) have been added, to permit the "other" behaviour to be configured.
+ 5. Assorted options on malware= and spam= scanners.

 
 

-    A DNS lookup may yield more than one record. Thus, the result of the lookup
-    for a dnslists check may yield more than one IP address. The question then
-    arises as to whether all the looked up addresses must be listed, or whether
-    just one is good enough. Both possibilities are provided for:
+ 6. A commandline option to write a comment into the logfile.

 
 

-    . If = or & is used, the condition is true if any one of the looked up
-      IP addresses matches one of the listed addresses. Consider:
+ 7. If built with EXPERIMENTAL_SOCKS feature enabled, the smtp transport can
+    be configured to make connections via socks5 proxies.

 
 

-        dnslists = a.b.c=127.0.0.1
+ 8. If built with EXPERIMENTAL_INTERNATIONAL, support is included for
+    the transmission of UTF-8 envelope addresses.

 
 

-      If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
-      true because 127.0.0.1 matches.
+ 9. If built with EXPERIMENTAL_INTERNATIONAL, an expansion item for a commonly
+    used encoding of Maildir folder names.

 
 

-    . If == or =& is used, the condition is true only if every one of the
-      looked up IP addresses matches one of the listed addresses. Consider:
+10. A logging option for slow DNS lookups.

 
 

-        dnslists = a.b.c==127.0.0.1
+11. New ${env {<variable>}} expansion.

 
 

-      If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
-      false because 127.0.0.2 is not listed. You would need to have
+12. A non-SMTP authenticator using information from TLS client certificates.

 
 

-        dnslists = a.b.c==127.0.0.1,127.0.0.2
+13. Main option "tls_eccurve" for selecting an Elliptic Curve for TLS.
+    Patch originally by Wolfgang Breyha.

 
 

-      for the condition to be true.
+14. Main option "dns_trust_aa" for trusting your local nameserver at the
+    same level as DNSSEC.

 
 

-    When ! is used to negate IP address matching, it inverts the result, giving
-    the precise opposite of the behaviour above. Thus:

 
 

-    . If != or !& is used, the condition is true if none of the looked up IP
-      addresses matches one of the listed addresses. Consider:
+Version 4.85
+------------

 
 

-        dnslists = a.b.c!&0.0.0.1
+ 1. If built with EXPERIMENTAL_DANE feature enabled, Exim will follow the
+    DANE smtp draft to assess a secure chain of trust of the certificate
+    used to establish the TLS connection based on a TLSA record in the
+    domain of the sender.

 
 

-      If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
-      false because 127.0.0.1 matches.
+ 2. The EXPERIMENTAL_TPDA feature has been renamed to EXPERIMENTAL_EVENT
+    and several new events have been created. The reason is because it has
+    been expanded beyond just firing events during the transport phase. Any
+    existing TPDA transport options will have to be rewritten to use a new
+    $event_name expansion variable in a condition. Refer to the
+    experimental-spec.txt for details and examples.

 
 

-    . If !== or !=& is used, the condition is true there is at least one looked
-      up IP address that does not match. Consider:
+ 3. The EXPERIMENTAL_CERTNAMES features is an enhancement to verify that
+    server certs used for TLS match the result of the MX lookup. It does
+    not use the same mechanism as DANE.

 
 

-        dnslists = a.b.c!=&0.0.0.1

 
 

-      If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
-      true, because 127.0.0.2 does not match. You would need to have
+Version 4.84
+------------

 
 

-        dnslists = a.b.c!=&0.0.0.1,0.0.0.2

 
 

-      for the condition to be false.
+Version 4.83
+------------

 
 

-    When the DNS lookup yields only a single IP address, there is no difference
-    between = and == and between & and =&.
+ 1. If built with the EXPERIMENTAL_PROXY feature enabled, Exim can be
+    configured to expect an initial header from a proxy that will make the
+    actual external source IP:host be used in exim instead of the IP of the
+    proxy that is connecting to it.

 
 

- 3. Up till now, the only control over which cipher suites GnuTLS uses has been
-    for the cipher algorithms. New options have been added to allow some of the
-    other parameters to be varied. Here is complete documentation for the
-    available features:
-
-    GnuTLS allows the caller to specify separate lists of permitted key
-    exchange methods, main cipher algorithms, and MAC algorithms. These may be
-    used in any combination to form a specific cipher suite. This is unlike
-    OpenSSL, where complete cipher names can be passed to its control function.
-    GnuTLS also allows a list of acceptable protocols to be supplied.
-
-    For compatibility with OpenSSL, the tls_require_ciphers option can be set
-    to complete cipher suite names such as RSA_ARCFOUR_SHA, but for GnuTLS this
-    option controls only the cipher algorithms. Exim searches each item in the
-    list for the name of an available algorithm. For example, if the list
-    contains RSA_AES_SHA, then AES is recognized, and the behaviour is exactly
-    the same as if just AES were given.
-
-    There are additional options called gnutls_require_kx, gnutls_require_mac,
-    and gnutls_require_protocols that can be used to restrict the key exchange
-    methods, MAC algorithms, and protocols, respectively. These options are
-    ignored if OpenSSL is in use.
-
-    All four options are available as global options, controlling how Exim
-    behaves as a server, and also as options of the smtp transport, controlling
-    how Exim behaves as a client. All the values are string expanded. After
-    expansion, the values must be colon-separated lists, though the separator
-    can be changed in the usual way.
-
-    Each of the four lists starts out with a default set of algorithms. If the
-    first item in one of the "require" options does _not_ start with an
-    exclamation mark, all the default items are deleted. In this case, only
-    those that are explicitly specified can be used. If the first item in one
-    of the "require" items _does_ start with an exclamation mark, the defaults
-    are left on the list.
-
-    Then, any item that starts with an exclamation mark causes the relevant
-    entry to be removed from the list, and any item that does not start with an
-    exclamation mark causes a new entry to be added to the list. Unrecognized
-    items in the list are ignored. Thus:
-
-      tls_require_ciphers = !ARCFOUR
-
-    allows all the defaults except ARCFOUR, whereas
-
-      tls_require_ciphers = AES : 3DES
-
-    allows only cipher suites that use AES or 3DES. For tls_require_ciphers
-    the recognized names are AES_256, AES_128, AES (both of the preceding),
-    3DES, ARCFOUR_128, ARCFOUR_40, and ARCFOUR (both of the preceding). The
-    default list does not contain all of these; it just has AES_256, AES_128,
-    3DES, and ARCFOUR_128.
-
-    For gnutls_require_kx, the recognized names are DHE_RSA, RSA (which
-    includes DHE_RSA), DHE_DSS, and DHE (which includes both DHE_RSA and
-    DHE_DSS). The default list contains RSA, DHE_DSS, DHE_RSA.
-
-    For gnutls_require_mac, the recognized names are SHA (synonym SHA1), and
-    MD5. The default list contains SHA, MD5.
-
-    For gnutls_require_protocols, the recognized names are TLS1 and SSL3.
-    The default list contains TLS1, SSL3.
-
-    In a server, the order of items in these lists is unimportant. The server
-    will advertise the availability of all the relevant cipher suites. However,
-    in a client, the order in the tls_require_ciphers list specifies a
-    preference order for the cipher algorithms. The first one in the client's
-    list that is also advertised by the server is tried first.
-
- 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. You must
-    not set this option unless you really, really, really understand what you
-    are doing. No pre-compiled distributions of Exim should ever set this
-    option. When it is set, Exim compiles a runtime option called
-    disable_fsync. If this is set true, Exim no longer calls fsync() to force
-    updated files' data to be written to disc. Unexpected events such as
-    crashes and power outages may cause data to be lost or scrambled. Beware.
-
-    When ENABLE_DISABLE_FSYNC is not set, a reference to disable_fsync in a
-    runtime configuration generates an "unknown option" error.
-
- 5. There is a new variable called $smtp_count_at_connection_start. The name
-    is deliberately long, in order to emphasize what the contents are. This
-    variable is set greater than zero only in processes spawned by the Exim
-    daemon for handling incoming SMTP connections. When the daemon accepts a
-    new connection, it increments this variable. A copy of the variable is
-    passed to the child process that handles the connection, but its value is
-    fixed, and never changes. It is only an approximation of how many incoming
-    connections there actually are, because many other connections may come and
-    go while a single connection is being processed. When a child process
-    terminates, the daemon decrements the variable.
-
- 6. There's a new control called no_pipelining, which does what its name
-    suggests. It turns off the advertising of the PIPELINING extension to SMTP.
-    To be useful, this control must be obeyed before Exim sends its response to
-    an EHLO command. Therefore, it should normally appear in an ACL controlled
-    by acl_smtp_connect or acl_smtp_helo.
+ 2. New verify option header_names_ascii, which will check to make sure
+    there are no non-ASCII characters in header names.  Exim itself handles
+    those non-ASCII characters, but downstream apps may not, so Exim can
+    detect and reject if those characters are present.

 
 

- 7. There are two new variables called $sending_ip_address and $sending_port.
-    These are set whenever an SMTP connection to another host has been set up,
-    and they contain the IP address and port of the local interface that is
-    being used. They are of interest only on hosts that have more than on IP
-    address that want to take on different personalities depending on which one
-    is being used.
+ 3. New expansion operator ${utf8clean:string} to replace malformed UTF8
+    codepoints with valid ones.

 
 

- 8. The expansion of the helo_data option in the smtp transport now happens
-    after the connection to the server has been made. This means that it can
-    use the value of $sending_ip_address (see 7 above) to vary the text of the
-    message. For example, if you want the string that is used for helo_data to
-    be obtained by a DNS lookup of the interface address, you could use this:
+ 4. New malware type "sock".  Talks over a Unix or TCP socket, sending one
+    command line and matching a regex against the return data for trigger
+    and a second regex to extract malware_name.  The mail spoolfile name can
+    be included in the command line.

 
 

-      helo_data = ${lookup dnsdb{ptr=$sending_ip_address}{$value}\
-        {$primary_hostname}}
+ 5. The smtp transport now supports options "tls_verify_hosts" and
+    "tls_try_verify_hosts".  If either is set the certificate verification
+    is split from the encryption operation. The default remains that a failed
+    verification cancels the encryption.

 
 

-    The use of helo_data applies both to sending messages and when doing
-    callouts.
+ 6. New SERVERS override of default ldap server list.  In the ACLs, an ldap
+    lookup can now set a list of servers to use that is different from the
+    default list.

 
 

- 9. There is a new expansion operator ${rfc2047d: that decodes strings that
-    are encoded as per RFC 2047. Binary zero bytes are replaced by question
-    marks. Characters are converted into the character set defined by
-    headers_charset. Overlong RFC 2047 "words" are not recognized unless
-    check_rfc2047_length is set false.
+ 7. New command-line option -C for exiqgrep to specify alternate exim.conf
+    file when searching the queue.

 
 

-10. There is a new log selector called "pid", which causes the current process
-    id to be added to every log line, in square brackets, immediately after the
-    time and date.
+ 8. OCSP now supports GnuTLS also, if you have version 3.1.3 or later of that.

 
 

-11. Exim has been modified so that it flushes SMTP output before implementing
-    a delay in an ACL. It also flushes the output before performing a callout,
-    as this can take a substantial time. These behaviours can be disabled by
-    obeying control = no_delay_flush or control = no_callout_flush,
-    respectively, at some earlier stage of the connection. The effect of the
-    new default behaviour is to disable the PIPELINING optimization in these
-    situations, in order to avoid unexpected timeouts in clients.
+ 9. Support for DNSSEC on outbound connections.

 
 

-12. There are two new expansion conditions that iterate over a list. They are
-    called forany and forall, and they are used like this:
+10. New variables "tls_(in,out)_(our,peer)cert" and expansion item
+    "certextract" to extract fields from them. Hash operators md5 and sha1
+    work over them for generating fingerprints, and a new sha256 operator
+    for them added.

 
 

-      ${if forany{<a list>}{<a condition>}{<yes-string>}{<no-string>}}
-      ${if forall{<a list>}{<a condition>}{<yes-string>}{<no-string>}}
+11. PRDR is now supported dy default.

 
 

-    The first argument is expanded, and the result is treated as a list. By
-    default, the list separator is a colon, but it can be changed by the normal
-    method. The second argument is interpreted as a condition that is to be
-    applied to each item in the list in turn. During the interpretation of the
-    condition, the current list item is placed in a variable called $item.
+12. OCSP stapling is now supported by default.

 
 

-    - For forany, interpretation stops if the condition is true for any item,
-      and the yes-string is then expanded. If the condition is false for all
-      items in the list, the no-string is expanded.
+13. If built with the EXPERIMENTAL_DSN feature enabled, Exim will output
+    Delivery Status Notification messages in MIME format, and negociate
+    DSN features per RFC 3461.

 
 

-    - For forall, interpration stops if the condition is false for any item,
-      and the no-string is then expanded. If the condition is true for all
-      items in the list, the yes-string is expanded.

 
 

-    Note that negation of forany means that the condition must be false for all
-    items for the overall condition to succeed, and negation of forall means
-    that the condition must be false for at least one item.
+Version 4.82
+------------

 
 

-    In this example, the list separator is changed to a comma:
+ 1. New command-line option -bI:sieve will list all supported sieve extensions
+    of this Exim build on standard output, one per line.
+    ManageSieve (RFC 5804) providers managing scripts for use by Exim should
+    query this to establish the correct list to include in the protocol's
+    SIEVE capability line.
+
+ 2. If the -n option is combined with the -bP option, then the name of an
+    emitted option is not output, only the value (if visible to you).
+    For instance, "exim -n -bP pid_file_path" should just emit a pathname
+    followed by a newline, and no other text.
+
+ 3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now
+    has a "tls_dh_min_bits" option, to set the minimum acceptable number of
+    bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites)
+    acceptable for security.  (Option accepted but ignored if using OpenSSL).
+    Defaults to 1024, the old value.  May be lowered only to 512, or raised as
+    far as you like.  Raising this may hinder TLS interoperability with other
+    sites and is not currently recommended.  Lowering this will permit you to
+    establish a TLS session which is not as secure as you might like.
+
+    Unless you really know what you are doing, leave it alone.
+
+ 4. If not built with DISABLE_DNSSEC, Exim now has the main option
+    dns_dnssec_ok; if set to 1 then Exim will initialise the resolver library
+    to send the DO flag to your recursive resolver.  If you have a recursive
+    resolver, which can set the Authenticated Data (AD) flag in results, Exim
+    can now detect this.  Exim does not perform validation itself, instead
+    relying upon a trusted path to the resolver.
+
+    Current status: work-in-progress; $sender_host_dnssec variable added.
+
+ 5. DSCP support for outbound connections: on a transport using the smtp driver,
+    set "dscp = ef", for instance, to cause the connections to have the relevant
+    DSCP (IPv4 TOS or IPv6 TCLASS) value in the header.
+
+    Similarly for inbound connections, there is a new control modifier, dscp,
+    so "warn control = dscp/ef" in the connect ACL, or after authentication.
+
+    Supported values depend upon system libraries.  "exim -bI:dscp" to list the
+    ones Exim knows of.  You can also set a raw number 0..0x3F.
+
+ 6. The -G command-line flag is no longer ignored; it is now equivalent to an
+    ACL setting "control = suppress_local_fixups".  The -L command-line flag
+    is now accepted and forces use of syslog, with the provided tag as the
+    process name.  A few other flags used by Sendmail are now accepted and
+    ignored.
+
+ 7. New cutthrough routing feature.  Requested by a "control = cutthrough_delivery"
+    ACL modifier; works for single-recipient mails which are recieved on and
+    deliverable via SMTP.  Using the connection made for a recipient verify,
+    if requested before the verify, or a new one made for the purpose while
+    the inbound connection is still active.  The bulk of the mail item is copied
+    direct from the inbound socket to the outbound (as well as the spool file).
+    When the source notifies the end of data, the data acceptance by the destination
+    is negociated before the acceptance is sent to the source.  If the destination
+    does not accept the mail item, for example due to content-scanning, the item
+    is not accepted from the source and therefore there is no need to generate
+    a bounce mail.  This is of benefit when providing a secondary-MX service.
+    The downside is that delays are under the control of the ultimate destination
+    system not your own.
+
+    The Recieved-by: header on items delivered by cutthrough is generated
+    early in reception rather than at the end; this will affect any timestamp
+    included.  The log line showing delivery is recorded before that showing
+    reception; it uses a new ">>" tag instead of "=>".
+
+    To support the feature, verify-callout connections can now use ESMTP and TLS.
+    The usual smtp transport options are honoured, plus a (new, default everything)
+    hosts_verify_avoid_tls.
+
+    New variable families named tls_in_cipher, tls_out_cipher etc. are introduced
+    for specific access to the information for each connection.  The old names
+    are present for now but deprecated.
+
+    Not yet supported: IGNOREQUOTA, SIZE, PIPELINING.
+
+ 8. New expansion operators ${listnamed:name} to get the content of a named list
+    and ${listcount:string} to count the items in a list.
+
+ 9. New global option "gnutls_allow_auto_pkcs11", defaults false.  The GnuTLS
+    rewrite in 4.80 combines with GnuTLS 2.12.0 or later, to autoload PKCS11
+    modules.  For some situations this is desirable, but we expect admin in
+    those situations to know they want the feature.  More commonly, it means
+    that GUI user modules get loaded and are broken by the setuid Exim being
+    unable to access files specified in environment variables and passed
+    through, thus breakage.  So we explicitly inhibit the PKCS11 initialisation
+    unless this new option is set.
+
+    Some older OS's with earlier versions of GnuTLS might not have pkcs11 ability,
+    so have also added a build option which can be used to build Exim with GnuTLS
+    but without trying to use any kind of PKCS11 support.  Uncomment this in the
+    Local/Makefile:
+
+    AVOID_GNUTLS_PKCS11=yes
+
+10. The "acl = name" condition on an ACL now supports optional arguments.
+    New expansion item "${acl {name}{arg}...}" and expansion condition
+    "acl {{name}{arg}...}" are added.  In all cases up to nine arguments
+    can be used, appearing in $acl_arg1 to $acl_arg9 for the called ACL.
+    Variable $acl_narg contains the number of arguments.  If the ACL sets
+    a "message =" value this becomes the result of the expansion item,
+    or the value of $value for the expansion condition.  If the ACL returns
+    accept the expansion condition is true; if reject, false.  A defer
+    return results in a forced fail.
+
+11. Routers and transports can now have multiple headers_add and headers_remove
+    option lines.  The concatenated list is used.
+
+12. New ACL modifier "remove_header" can remove headers before message gets
+    handled by routers/transports.
+
+13. New dnsdb lookup pseudo-type "a+".  A sequence of "a6" (if configured),
+    "aaaa" and "a" lookups is done and the full set of results returned.
+
+14. New expansion variable $headers_added with content from ACL add_header
+    modifier (but not yet added to messsage).

 
 

-      ${if forany{<, $recipients}{match{$item}{^user3@}}{yes}{no}}
+15. New 8bitmime status logging option for received messages.  Log field "M8S".

 
 

-    Outside a forany/forall condition, the value of $item is an empty string.
-    Its value is saved and restored while forany/forall is being processed, to
-    enable these expansion items to be nested.
+16. New authenticated_sender logging option, adding to log field "A".

 
 

-13. There's a new global option called dsn_from that can be used to vary the
-    contents of From: lines in bounces and other automatically generated
-    messages ("delivery status notifications" - hence the name of the option).
-    The default setting is:
+17. New expansion variables $router_name and $transport_name.  Useful
+    particularly for debug_print as -bt commandline option does not
+    require privilege whereas -d does.

 
 

-      dsn_from = Mail Delivery System <Mailer-Daemon@$qualify_domain>
+18. If built with EXPERIMENTAL_PRDR, per-recipient data responses per a
+    proposed extension to SMTP from Eric Hall.

 
 

-    The value is expanded every time it is needed. If the expansion fails, a
-    panic is logged, and the default setting is used.
+19. The pipe transport has gained the force_command option, to allow
+    decorating commands from user .forward pipe aliases with prefix
+    wrappers, for instance.
+
+20. Callout connections can now AUTH; the same controls as normal delivery
+    connections apply.

 
 

-14. The smtp transport has a new option called hosts_avoid_pipelining. It can
-    be used to suppress the use of PIPELINING to certain hosts, while still
-    supporting the other SMTP extensions (cf hosts_avoid_tls).
+21. Support for DMARC, using opendmarc libs, can be enabled. It adds new
+    options: dmarc_forensic_sender, dmarc_history_file, and dmarc_tld_file.
+    It adds new expansion variables $dmarc_ar_header, $dmarc_status,
+    $dmarc_status_text, and $dmarc_used_domain.  It adds a new acl modifier
+    dmarc_status.  It adds new control flags dmarc_disable_verify and
+    dmarc_enable_forensic.
+
+22. Add expansion variable $authenticated_fail_id, which is the username
+    provided to the authentication method which failed.  It is available
+    for use in subsequent ACL processing (typically quit or notquit ACLs).
+
+23. New ACL modifer "udpsend" can construct a UDP packet to send to a given
+    UDP host and port.
+
+24. New ${hexquote:..string..} expansion operator converts non-printable
+    characters in the string to \xNN form.
+
+25. Experimental TPDA (Transport Post Delivery Action) function added.
+    Patch provided by Axel Rau.
+
+26. Experimental Redis lookup added. Patch provided by Warren Baker.
+
+
+Version 4.80
+------------
+
+ 1. New authenticator driver, "gsasl".  Server-only (at present).
+    This is a SASL interface, licensed under GPL, which can be found at
+    http://www.gnu.org/software/gsasl/.
+    This system does not provide sources of data for authentication, so
+    careful use needs to be made of the conditions in Exim.
+
+ 2. New authenticator driver, "heimdal_gssapi".  Server-only.
+    A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME
+    is no longer honoured for setuid programs by Heimdal.  Use the
+    "server_keytab" option to point to the keytab.
+
+ 3. The "pkg-config" system can now be used when building Exim to reference
+    cflags and library information for lookups and authenticators, rather
+    than having to update "CFLAGS", "AUTH_LIBS", "LOOKUP_INCLUDE" and
+    "LOOKUP_LIBS" directly.  Similarly for handling the TLS library support
+    without adjusting "TLS_INCLUDE" and "TLS_LIBS".
+
+    In addition, setting PCRE_CONFIG=yes will query the pcre-config tool to
+    find the headers and libraries for PCRE.
+
+ 4. New expansion variable $tls_bits.
+
+ 5. New lookup type, "dbmjz".  Key is an Exim list, the elements of which will
+    be joined together with ASCII NUL characters to construct the key to pass
+    into the DBM library.  Can be used with gsasl to access sasldb2 files as
+    used by Cyrus SASL.
+
+ 6. OpenSSL now supports TLS1.1 and TLS1.2 with OpenSSL 1.0.1.
+
+    Avoid release 1.0.1a if you can.  Note that the default value of
+    "openssl_options" is no longer "+dont_insert_empty_fragments", as that
+    increased susceptibility to attack.  This may still have interoperability
+    implications for very old clients (see version 4.31 change 37) but
+    administrators can choose to make the trade-off themselves and restore
+    compatibility at the cost of session security.
+
+ 7. Use of the new expansion variable $tls_sni in the main configuration option
+    tls_certificate will cause Exim to re-expand the option, if the client
+    sends the TLS Server Name Indication extension, to permit choosing a
+    different certificate; tls_privatekey will also be re-expanded.  You must
+    still set these options to expand to valid files when $tls_sni is not set.
+
+    The SMTP Transport has gained the option tls_sni, which will set a hostname
+    for outbound TLS sessions, and set $tls_sni too.
+
+    A new log_selector, +tls_sni, has been added, to log received SNI values
+    for Exim as a server.
+
+ 8. The existing "accept_8bitmime" option now defaults to true.  This means
+    that Exim is deliberately not strictly RFC compliant.  We're following
+    Dan Bernstein's advice in http://cr.yp.to/smtp/8bitmime.html by default.
+    Those who disagree, or know that they are talking to mail servers that,
+    even today, are not 8-bit clean, need to turn off this option.
+
+ 9. Exim can now be started with -bw (with an optional timeout, given as
+    -bw<timespec>).  With this, stdin at startup is a socket that is
+    already listening for connections.  This has a more modern name of
+    "socket activation", but forcing the activated socket to fd 0.  We're
+    interested in adding more support for modern variants.
+
+10. ${eval } now uses 64-bit values on supporting platforms.  A new "G" suffix
+    for numbers indicates multiplication by 1024^3.
+
+11. The GnuTLS support has been revamped; the three options gnutls_require_kx,
+    gnutls_require_mac & gnutls_require_protocols are no longer supported.
+    tls_require_ciphers is now parsed by gnutls_priority_init(3) as a priority
+    string, documentation for which is at:
+    http://www.gnutls.org/manual/html_node/Priority-Strings.html
+
+    SNI support has been added to Exim's GnuTLS integration too.
+
+    For sufficiently recent GnuTLS libraries, ${randint:..} will now use
+    gnutls_rnd(), asking for GNUTLS_RND_NONCE level randomness.
+
+12. With OpenSSL, if built with EXPERIMENTAL_OCSP, a new option tls_ocsp_file
+    is now available.  If the contents of the file are valid, then Exim will
+    send that back in response to a TLS status request; this is OCSP Stapling.
+    Exim will not maintain the contents of the file in any way: administrators
+    are responsible for ensuring that it is up-to-date.
+
+    See "experimental-spec.txt" for more details.
+
+13. ${lookup dnsdb{ }} supports now SPF record types. They are handled
+    identically to TXT record lookups.
+
+14. New expansion variable $tod_epoch_l for higher-precision time.
+
+15. New global option tls_dh_max_bits, defaulting to current value of NSS
+    hard-coded limit of DH ephemeral bits, to fix interop problems caused by
+    GnuTLS 2.12 library recommending a bit count higher than NSS supports.
+
+16. tls_dhparam now used by both OpenSSL and GnuTLS, can be path or identifier.
+    Option can now be a path or an identifier for a standard prime.
+    If unset, we use the DH prime from section 2.2 of RFC 5114, "ike23".
+    Set to "historic" to get the old GnuTLS behaviour of auto-generated DH
+    primes.
+
+17. SSLv2 now disabled by default in OpenSSL.  (Never supported by GnuTLS).
+    Use "openssl_options -no_sslv2" to re-enable support, if your OpenSSL
+    install was not built with OPENSSL_NO_SSL2 ("no-ssl2").
+
+
+Version 4.77
+------------
+
+ 1. New options for the ratelimit ACL condition: /count= and /unique=.
+    The /noupdate option has been replaced by a /readonly option.
+
+ 2. The SMTP transport's protocol option may now be set to "smtps", to
+    use SSL-on-connect outbound.
+
+ 3. New variable $av_failed, set true if the AV scanner deferred; ie, when
+    there is a problem talking to the AV scanner, or the AV scanner running.
+
+ 4. New expansion conditions, "inlist" and "inlisti", which take simple lists
+    and check if the search item is a member of the list.  This does not
+    support named lists, but does subject the list part to string expansion.
+
+ 5. Unless the new EXPAND_LISTMATCH_RHS build option is set when Exim was
+    built, Exim no longer performs string expansion on the second string of
+    the match_* expansion conditions: "match_address", "match_domain",
+    "match_ip" & "match_local_part".  Named lists can still be used.
+
+
+Version 4.76
+------------
+
+ 1. The global option "dns_use_edns0" may be set to coerce EDNS0 usage on
+    or off in the resolver library.
+
+
+Version 4.75
+------------
+
+ 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support, there
+    is now LDAP/TLS support, given sufficiently modern OpenLDAP client
+    libraries.  The following global options have been added in support of
+    this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file, ldap_cert_key,
+    ldap_cipher_suite, ldap_require_cert, ldap_start_tls.
+
+ 2. The pipe transport now takes a boolean option, "freeze_signal", default
+    false.  When true, if the external delivery command exits on a signal then
+    Exim will freeze the message in the queue, instead of generating a bounce.
+
+ 3. Log filenames may now use %M as an escape, instead of %D (still available).
+    The %M pattern expands to yyyymm, providing month-level resolution.
+
+ 4. The $message_linecount variable is now updated for the maildir_tag option,
+    in the same way as $message_size, to reflect the real number of lines,
+    including any header additions or removals from transport.
+
+ 5. When contacting a pool of SpamAssassin servers configured in spamd_address,
+    Exim now selects entries randomly, to better scale in a cluster setup.
+
+
+Version 4.74
+------------
+
+ 1. SECURITY FIX: privilege escalation flaw fixed. On Linux (and only Linux)
+    the flaw permitted the Exim run-time user to cause root to append to
+    arbitrary files of the attacker's choosing, with the content based
+    on content supplied by the attacker.
+
+ 2. Exim now supports loading some lookup types at run-time, using your
+    platform's dlopen() functionality.  This has limited platform support
+    and the intention is not to support every variant, it's limited to
+    dlopen().  This permits the main Exim binary to not be linked against
+    all the libraries needed for all the lookup types.

 
 

-15. By default, exigrep does case-insensitive matches. There is now a -I option
-    that makes it case-sensitive. This may give a performance improvement when
-    searching large log files. Without -I, the Perl pattern matches use the /i
-    option; with -I they don't. In both cases it is possible to change the case
-    sensitivity within the pattern using (?i) or (?-i).

 
 

-16. A number of new features have been added to string expansions to make it
-    easier to process lists of items, typically addresses. These are as
-    follows:
+Version 4.73
+------------
+
+ NOTE: this version is not guaranteed backwards-compatible, please read the
+       items below carefully
+
+ 1. A new main configuration option, "openssl_options", is available if Exim
+    is built with SSL support provided by OpenSSL.  The option allows
+    administrators to specify OpenSSL options to be used on connections;
+    typically this is to set bug compatibility features which the OpenSSL
+    developers have not enabled by default.  There may be security
+    consequences for certain options, so these should not be changed
+    frivolously.
+
+ 2. A new pipe transport option, "permit_coredumps", may help with problem
+    diagnosis in some scenarios.  Note that Exim is typically installed as
+    a setuid binary, which on most OSes will inhibit coredumps by default,
+    so that safety mechanism would have to be overridden for this option to
+    be able to take effect.
+
+ 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless
+    Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes
+    Note that this switches Exim to use a new API ("INSTREAM") and a future
+    release of ClamAV will remove support for the old API ("STREAM").
+
+    The av_scanner option, when set to "clamd", now takes an optional third
+    part, "local", which causes Exim to pass a filename to ClamAV instead of
+    the file content.  This is the same behaviour as when clamd is pointed at
+    a Unix-domain socket.  For example:
+
+      av_scanner = clamd:192.0.2.3 1234:local
+
+    ClamAV's ExtendedDetectionInfo response format is now handled.
+
+ 4. There is now a -bmalware option, restricted to admin users.  This option
+    takes one parameter, a filename, and scans that file with Exim's
+    malware-scanning framework.  This is intended purely as a debugging aid
+    to ensure that Exim's scanning is working, not to replace other tools.
+    Note that the ACL framework is not invoked, so if av_scanner references
+    ACL variables without a fallback then this will fail.
+
+ 5. There is a new expansion operator, "reverse_ip", which will reverse IP
+    addresses; IPv4 into dotted quad, IPv6 into dotted nibble.  Examples:
+
+      ${reverse_ip:192.0.2.4}
+       -> 4.2.0.192
+      ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
+       -> 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
+
+ 6. There is a new ACL control called "debug", to enable debug logging.
+    This allows selective logging of certain incoming transactions within
+    production environments, with some care.  It takes two options, "tag"
+    and "opts"; "tag" is included in the filename of the log and "opts"
+    is used as per the -d<options> command-line option.  Examples, which
+    don't all make sense in all contexts:
+
+      control = debug
+      control = debug/tag=.$sender_host_address
+      control = debug/opts=+expand+acl
+      control = debug/tag=.$message_exim_id/opts=+expand
+
+ 7. It has always been implicit in the design and the documentation that
+    "the Exim user" is not root.  src/EDITME said that using root was
+    "very strongly discouraged".  This is not enough to keep people from
+    shooting themselves in the foot in days when many don't configure Exim
+    themselves but via package build managers.  The security consequences of
+    running various bits of network code are severe if there should be bugs in
+    them.  As such, the Exim user may no longer be root.  If configured
+    statically, Exim will refuse to build.  If configured as ref:user then Exim
+    will exit shortly after start-up.  If you must shoot yourself in the foot,
+    then henceforth you will have to maintain your own local patches to strip
+    the safeties off.
+
+ 8. There is a new expansion condition, bool_lax{}.  Where bool{} uses the ACL
+    condition logic to determine truth/failure and will fail to expand many
+    strings, bool_lax{} uses the router condition logic, where most strings
+    do evaluate true.
+    Note: bool{00} is false, bool_lax{00} is true.
+
+ 9. Routers now support multiple "condition" tests.
+
+10. There is now a runtime configuration option "tcp_wrappers_daemon_name".
+    Setting this allows an admin to define which entry in the tcpwrappers
+    config file will be used to control access to the daemon.  This option
+    is only available when Exim is built with USE_TCP_WRAPPERS.  The
+    default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME
+    build option.
+
+11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now
+    the Exim run-time user, instead of root.
+
+12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and
+    is forced on.  This is mitigated by the new build option
+    TRUSTED_CONFIG_LIST which defines a list of configuration files which
+    are trusted; one per line. If a config file is owned by root and matches
+    a pathname in the list, then it may be invoked by the Exim build-time
+    user without Exim relinquishing root privileges.
+
+13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
+    trusted to supply -D<Macro[=Value]> overrides on the command-line.  Going
+    forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that
+    include the main config.  As a transition mechanism, we are temporarily
+    providing a work-around: the new build option WHITELIST_D_MACROS provides
+    a colon-separated list of macro names which may be overridden by the Exim
+    run-time user.  The values of these macros are constrained to the regex
+    ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values).
+
+
+Version 4.72
+------------
+
+ 1. TWO SECURITY FIXES: one relating to mail-spools which are globally
+    writable, the other to locking of MBX folders (not mbox).
+
+ 2. MySQL stored procedures are now supported.
+
+ 3. The dkim_domain transport option is now a list, not a single string, and
+    messages will be signed for each element in the list (discarding
+    duplicates).
+
+ 4. The 4.70 release unexpectedly changed the behaviour of dnsdb TXT lookups
+    in the presence of multiple character strings within the RR. Prior to 4.70,
+    only the first string would be returned.  The dnsdb lookup now, by default,
+    preserves the pre-4.70 semantics, but also now takes an extended output
+    separator specification.  The separator can be followed by a semicolon, to
+    concatenate the individual text strings together with no join character,
+    or by a comma and a second separator character, in which case the text
+    strings within a TXT record are joined on that second character.
+    Administrators are reminded that DNS provides no ordering guarantees
+    between multiple records in an RRset.  For example:
+
+      foo.example.  IN TXT "a" "b" "c"
+      foo.example.  IN TXT "d" "e" "f"
+
+      ${lookup dnsdb{>/ txt=foo.example}}   -> "a/d"
+      ${lookup dnsdb{>/; txt=foo.example}}  -> "def/abc"
+      ${lookup dnsdb{>/,+ txt=foo.example}} -> "a+b+c/d+e+f"
+
+
+Version 4.70 / 4.71
+-------------------
+
+ 1. Native DKIM support without an external library.
+    (Note that if no action to prevent it is taken, a straight upgrade will
+    result in DKIM verification of all signed incoming emails.  See spec
+    for details on conditionally disabling)
+
+ 2. Experimental DCC support via dccifd (contributed by Wolfgang Breyha).
+
+ 3. There is now a bool{} expansion condition which maps certain strings to
+    true/false condition values (most likely of use in conjunction with the
+    and{} expansion operator).
+
+ 4. The $spam_score, $spam_bar and $spam_report variables are now available
+    at delivery time.
+
+ 5. exim -bP now supports "macros", "macro_list" or "macro MACRO_NAME" as
+    options, provided that Exim is invoked by an admin_user.
+
+ 6. There is a new option gnutls_compat_mode, when linked against GnuTLS,
+    which increases compatibility with older clients at the cost of decreased
+    security.  Don't set this unless you need to support such clients.
+
+ 7. There is a new expansion operator, ${randint:...} which will produce a
+    "random" number less than the supplied integer.  This randomness is
+    not guaranteed to be cryptographically strong, but depending upon how
+    Exim was built may be better than the most naive schemes.
+
+ 8. Exim now explicitly ensures that SHA256 is available when linked against
+    OpenSSL.
+
+ 9. The transport_filter_timeout option now applies to SMTP transports too.
+

 
 

-  * ${addresses:<string>}
+Version 4.69
+------------
+
+ 1. Preliminary DKIM support in Experimental.
+
+
+Version 4.68
+------------
+
+ 1. The body_linecount and body_zerocount C variables are now exported in the
+    local_scan API.
+
+ 2. When a dnslists lookup succeeds, the key that was looked up is now placed
+    in $dnslist_matched. When the key is an IP address, it is not reversed in
+    this variable (though it is, of course, in the actual lookup). In simple
+    cases, for example:
+
+      deny dnslists = spamhaus.example
+
+    the key is also available in another variable (in this case,
+    $sender_host_address). In more complicated cases, however, this is not
+    true. For example, using a data lookup might generate a dnslists lookup
+    like this:
+
+      deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|...
+
+    If this condition succeeds, the value in $dnslist_matched might be
+    192.168.6.7 (for example).
+
+ 3. Authenticators now have a client_condition option. When Exim is running as
+    a client, it skips an authenticator whose client_condition expansion yields
+    "0", "no", or "false". This can be used, for example, to skip plain text
+    authenticators when the connection is not encrypted by a setting such as:
+
+      client_condition = ${if !eq{$tls_cipher}{}}
+
+    Note that the 4.67 documentation states that $tls_cipher contains the
+    cipher used for incoming messages. In fact, during SMTP delivery, it
+    contains the cipher used for the delivery. The same is true for
+    $tls_peerdn.
+
+ 4. There is now a -Mvc <message-id> option, which outputs a copy of the
+    message to the standard output, in RFC 2822 format. The option can be used
+    only by an admin user.
+
+ 5. There is now a /noupdate option for the ratelimit ACL condition. It
+    computes the rate and checks the limit as normal, but it does not update
+    the saved data. This means that, in relevant ACLs, it is possible to lookup
+    the existence of a specified (or auto-generated) ratelimit key without
+    incrementing the ratelimit counter for that key.
+
+    In order for this to be useful, another ACL entry must set the rate
+    for the same key somewhere (otherwise it will always be zero).
+
+    Example:
+
+    acl_check_connect:
+      # Read the rate; if it doesn't exist or is below the maximum
+      # we update it below
+      deny ratelimit = 100 / 5m / strict / noupdate
+           log_message = RATE: $sender_rate / $sender_rate_period \
+                         (max $sender_rate_limit)

 
 

-    The string (after expansion) is interpreted as a list of addresses in RFC
-    2822 format, such as can be found in a To: or Cc: header line. The
-    operative address (local-part@domain) is extracted from each item, and the
-    result of the expansion is a colon-separated list, with appropriate
-    doubling of colons should any happen to be present in the email addresses.
-    Syntactically invalid RFC2822 address items are omitted from the output.
+      [... some other logic and tests...]

 
 

-    It is possible to specify a character other than colon for the output
-    separator by starting the string with > followed by the new separator
-    character. For example:
+      warn ratelimit = 100 / 5m / strict / per_cmd
+           log_message = RATE UPDATE: $sender_rate / $sender_rate_period \
+                         (max $sender_rate_limit)
+           condition = ${if le{$sender_rate}{$sender_rate_limit}}

 
 

-      ${addresses:>& The Boss <ceo@up.stairs>, sec@base.ment (dogsbody)}
+      accept

 
 

-    expands to "ceo@up.stairs&sec@base.ment". Compare ${address (singular),
-    which extracts the working address from a single RFC2822 address.
+ 6. The variable $max_received_linelength contains the number of bytes in the
+    longest line that was received as part of the message, not counting the
+    line termination character(s).

 
 

-  * ${map{<string1>}{<string2>}}
+ 7. Host lists can now include +ignore_defer and +include_defer, analagous to
+    +ignore_unknown and +include_unknown. These options should be used with
+    care, probably only in non-critical host lists such as whitelists.

 
 

-    After expansion, <string1> is interpreted as a list, colon-separated by
-    default, but the separator can be changed in the usual way. For each item
-    in this list, its value is place in $item, and then <string2> is expanded
-    and added to the output as an item in a new list. The separator used for
-    the output list is the same as the one used for the input, but is not
-    included in the output. For example:
+ 8. There's a new option called queue_only_load_latch, which defaults true.
+    If set false when queue_only_load is greater than zero, Exim re-evaluates
+    the load for each incoming message in an SMTP session. Otherwise, once one
+    message is queued, the remainder are also.

 
 

-      ${map{a:b:c}{[$item]}} ${map{<- x-y-z}{($item)}}
+ 9. There is a new ACL, specified by acl_smtp_notquit, which is run in most
+    cases when an SMTP session ends without sending QUIT. However, when Exim
+    itself is is bad trouble, such as being unable to write to its log files,
+    this ACL is not run, because it might try to do things (such as write to
+    log files) that make the situation even worse.

 
 

-    expands to "[a]:[b]:[c] (x)-(y)-(z)". At the end of the expansion, the
-    value of $item is restored to what it was before.
+    Like the QUIT ACL, this new ACL is provided to make it possible to gather
+    statistics. Whatever it returns (accept or deny) is immaterial. The "delay"
+    modifier is forbidden in this ACL.

 
 

-  * ${filter{<string1>}{<condition>}}
+    When the NOTQUIT ACL is running, the variable $smtp_notquit_reason is set
+    to a string that indicates the reason for the termination of the SMTP
+    connection. The possible values are:

 
 

-    After expansion, <string1> is interpreted as a list, colon-separated by
-    default, but the separator can be changed in the usual way. For each item
-    in this list, its value is place in $item, and then the condition is
-    evaluated. If the condition is true, $item is added to the output as an
-    item in a new list; if the condition is false, the item is discarded. The
-    separator used for the output list is the same as the one used for the
-    input, but is not included in the output. For example:
+      acl-drop                 Another ACL issued a "drop" command
+      bad-commands             Too many unknown or non-mail commands
+      command-timeout          Timeout while reading SMTP commands
+      connection-lost          The SMTP connection has been lost
+      data-timeout             Timeout while reading message data
+      local-scan-error         The local_scan() function crashed
+      local-scan-timeout       The local_scan() function timed out
+      signal-exit              SIGTERM or SIGINT
+      synchronization-error    SMTP synchronization error
+      tls-failed               TLS failed to start

 
 

-      ${filter{a:b:c}{!eq{$item}{b}}
+    In most cases when an SMTP connection is closed without having received
+    QUIT, Exim sends an SMTP response message before actually closing the
+    connection. With the exception of acl-drop, the default message can be
+    overridden by the "message" modifier in the NOTQUIT ACL. In the case of a
+    "drop" verb in another ACL, it is the message from the other ACL that is
+    used.

 
 

-    yields "a:c". At the end of the expansion, the value of $item is restored
-    to what it was before.
+10. For MySQL and PostgreSQL lookups, it is now possible to specify a list of
+    servers with individual queries. This is done by starting the query with
+    "servers=x:y:z;", where each item in the list may take one of two forms:

 
 

-  * ${reduce{<string1>}{<string2>}{<string3>}}
+    (1) If it is just a host name, the appropriate global option (mysql_servers
+        or pgsql_servers) is searched for a host of the same name, and the
+        remaining parameters (database, user, password) are taken from there.

 
 

-    The ${reduce expansion operation reduces a list to a single, scalar string.
-    After expansion, <string1> is interpreted as a list, colon-separated by
-    default, but the separator can be changed in the usual way. Then <string2>
-    is expanded and assigned to the $value variable. After this, each item in
-    the <string1> list is assigned to $item in turn, and <string3> is expanded
-    for each of them. The result of that expansion is assigned to $value before
-    the next iteration. When the end of the list is reached, the final value of
-    $value is added to the expansion string. The ${reduce expansion item can be
-    used in a number of ways. For example, to add up a list of numbers:
+    (2) If it contains any slashes, it is taken as a complete parameter set.

 
 

-      ${reduce {<, 1,2,3}{0}{${eval:$value+$item}}}
+    The list of servers is used in exactly the same was as the global list.
+    Once a connection to a server has happened and a query has been
+    successfully executed, processing of the lookup ceases.

 
 

-    The result of that expansion would be "6". The maximum of a list of numbers
-    can be found:
+    This feature is intended for use in master/slave situations where updates
+    are occurring, and one wants to update a master rather than a slave. If the
+    masters are in the list for reading, you might have:

 
 

-      ${reduce {3:0:9:4:6}{0}{${if >{$item}{$value}{$item}{$value}}}}
+      mysql_servers = slave1/db/name/pw:slave2/db/name/pw:master/db/name/pw

 
 

-    At the end of a ${reduce expansion, the values of $item and $value is
-    restored to what they were before.
+    In an updating lookup, you could then write
+
+      ${lookup mysql{servers=master; UPDATE ...}
+
+    If, on the other hand, the master is not to be used for reading lookups:
+
+      pgsql_servers = slave1/db/name/pw:slave2/db/name/pw
+
+    you can still update the master by
+
+      ${lookup pgsql{servers=master/db/name/pw; UPDATE ...}
+
+11. The message_body_newlines option (default FALSE, for backwards
+    compatibility) can be used to control whether newlines are present in
+    $message_body and $message_body_end. If it is FALSE, they are replaced by
+    spaces.
+
+
+Version 4.67
+------------
+
+ 1. There is a new log selector called smtp_no_mail, which is not included in
+    the default setting. When it is set, a line is written to the main log
+    whenever an accepted SMTP connection terminates without having issued a
+    MAIL command.
+
+ 2. When an item in a dnslists list is followed by = and & and a list of IP
+    addresses, the behaviour was not clear when the lookup returned more than
+    one IP address. This has been solved by the addition of == and =& for "all"
+    rather than the default "any" matching.
+
+ 3. Up till now, the only control over which cipher suites GnuTLS uses has been
+    for the cipher algorithms. New options have been added to allow some of the
+    other parameters to be varied.
+
+ 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is
+    set, Exim compiles a runtime option called disable_fsync.
+
+ 5. There is a new variable called $smtp_count_at_connection_start.
+
+ 6. There's a new control called no_pipelining.
+
+ 7. There are two new variables called $sending_ip_address and $sending_port.
+    These are set whenever an SMTP connection to another host has been set up.
+
+ 8. The expansion of the helo_data option in the smtp transport now happens
+    after the connection to the server has been made.
+
+ 9. There is a new expansion operator ${rfc2047d: that decodes strings that
+    are encoded as per RFC 2047.
+
+10. There is a new log selector called "pid", which causes the current process
+    id to be added to every log line, in square brackets, immediately after the
+    time and date.
+
+11. Exim has been modified so that it flushes SMTP output before implementing
+    a delay in an ACL. It also flushes the output before performing a callout,
+    as this can take a substantial time. These behaviours can be disabled by
+    obeying control = no_delay_flush or control = no_callout_flush,
+    respectively, at some earlier stage of the connection.
+
+12. There are two new expansion conditions that iterate over a list. They are
+    called forany and forall.
+
+13. There's a new global option called dsn_from that can be used to vary the
+    contents of From: lines in bounces and other automatically generated
+    messages ("delivery status notifications" - hence the name of the option).
+
+14. The smtp transport has a new option called hosts_avoid_pipelining.
+
+15. By default, exigrep does case-insensitive matches. There is now a -I option
+    that makes it case-sensitive.
+
+16. A number of new features ("addresses", "map", "filter", and "reduce") have
+    been added to string expansions to make it easier to process lists of
+    items, typically addresses.

 
 17. There's a new ACL modifier called "continue". It does nothing of itself,
     and processing of the ACL always continues with the next condition or
     modifier. It is provided so that the side effects of expanding its argument
 
 17. There's a new ACL modifier called "continue". It does nothing of itself,
     and processing of the ACL always continues with the next condition or
     modifier. It is provided so that the side effects of expanding its argument

-    can be used. Typically this would be for updating a database. It is really
-    just a syntactic tidiness, because the following two lines have the same
-    effect:
-
-      continue  = <some expansion>
-      condition = ${if eq{0}{<some expansion>}{true}{true}}
+    can be used.

 
 18. It is now possible to use newline and other control characters (those with
 
 18. It is now possible to use newline and other control characters (those with

-    values less than 32, plus DEL) as separators in lists. Such separators must
-    be provided literally at the time the list is processed, but the string
-    expansion that happens first means that you can write them using normal
-    escape sequences. For example, if a new-line separated list of domains is
-    generated by a lookup, you can now process it directly by a line such as
-    this:
-
-      domains = <\n ${lookup mysql{.....}}
-
-    This avoids having to change the list separator in such data. Unlike
-    printing character separators, which can be included in list items by
-    doubling, it is not possible to include a control character as data when it
-    is set as the separator. Two such characters in succession are interpreted
-    as enclosing an empty list item.
+    values less than 32, plus DEL) as separators in lists.

 
 19. The exigrep utility now has a -v option, which inverts the matching
     condition.
 
 
 19. The exigrep utility now has a -v option, which inverts the matching
     condition.
 

+20. The host_find_failed option in the manualroute router can now be set to
+    "ignore".
+

 
 Version 4.66
 ------------
 
 Version 4.66
 ------------