# Debug time & pid
-$time_pid = "(?:\\d{2}:\\d{2}:\\d{2}\\s+\\d+\\s)";
+$time_pid = "(?:(?:\\d{2}:\\d{2}:\\d{2}\\s+)?\\d+\\s)";
# Pattern for matching pids at start of stderr lines; initially something
# that won't match.
my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
$expired = '' if !defined $expired;
- # Round the time-difference up to nearest even value
- my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1;
+ # Make time-difference minimum 2, and rounded up to even value
+ my($increment) = date_seconds($date3) - date_seconds($date2) + 1;
+ $increment = 2 if ($increment == 0);
+ $increment = ($increment >> 1) << 1;
# We used to use globally unique replacement values, but timing
# differences make this impossible. Just show the increment on the
s/\d\d-\w\w\w-\d\d\d\d\s\d\d:\d\d:\d\d\s[-+]\d\d\d\d,/06-Sep-1999 15:52:48 +0100,/gx;
# Dates/times in debugging output for writing retry records
- if (/^ first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/)
+ if (/^(.+)first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/)
{
- my($next) = $3 - $2;
- $_ = " first failed=dddd last try=dddd next try=+$next $4\n";
+ my($next) = $4 - $3;
+ $_ = "$1first failed=dddd last try=dddd next try=+$next $5\n";
}
- s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
- s/^(\s*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
+ s/^(.*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
+ s/^(.*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
# Time to retry may vary
s/time to retry = \S+/time to retry = tttt/;
s/(TLS error on connection from .* \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
next if /SSL verify error: depth=0 error=certificate not trusted/;
+ # OpenSSL 3.2.1
# OpenSSL 3.0.0
- s/TLS error \(D-H param setting .* error:\K.*dh key too small/xxxxxxxx:SSL routines::dh key too small/;
+ s/TLS\ error\ \(D-H\ param\ setting\ .*\ error:\K
+ .*
+ (?:dh\ key\ too\ small|unknown\ security\ bits)
+ /xxxxxxxx:SSL routines::dh key too small/x;
# OpenSSL 1.1.1
s/error:\K0B080074:x509 certificate routines:X509_check_private_key(?=:key values mismatch$)/05800074:x509 certificate routines:/;
next if /SSL verify error: depth=0 error=certificate not trusted/;
s/SSL3_READ_BYTES/ssl3_read_bytes/i;
s/CONNECT_CR_FINISHED/ssl3_read_bytes/i;
- s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
+ s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)?
+ (:SSL\ routines:ssl3_read_bytes:)
+ ssl(?:v3|\/tls)
+ ([^:]+:)
+ .*
+ (:SSL\ alert\ number\ \d\d)$
+ /pppp:error:dddddddd$1sslv3$2\[...\]$3/x;
s/^error:\K[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/dddddddd:$1/;
s/^error:\K[[:xdigit:]]+:SSL routines::(tlsv13 alert certificate required)$/dddddddd:SSL routines:ssl3_read_bytes:$1/;
- s/^error:\K[[:xdigit:]]+:SSL routines::((tlsv1|sslv3) alert (unknown ca|certificate revoked))$/dddddddd:SSL routines:ssl3_read_bytes:$1/;
+ s/^error:\K
+ [[:xdigit:]]+:SSL\ routines::
+ ((?:tlsv1|sslv3)\ alert\ (?:unknown\ ca|certificate\ revoked))$
+ /dddddddd:SSL routines:ssl3_read_bytes:$1/x;
+ s/^error:\K
+ [[:xdigit:]]+:SSL\ routines::
+ ssl\/tls\ (alert\ (?:unknown\ ca|certificate\ revoked))$
+ /dddddddd:SSL routines:ssl3_read_bytes:sslv3 $1/x;
# gnutls version variances
next if /^Error in the pull function./;
(?: .*\sBerkeley\ DB
| \sProbably\ (?:Berkeley\ DB|ndbm|GDBM)
| \sUsing\ (?:tdb|sqlite3)
- | Authenticators:
+ | Authenticators\ \((?:built-in|dynamic)\):
| Lookups(?:\(built-in\))?:
| Support\ for:
- | Routers:
- | Transports:
+ | Routers\ \((?:built-in|dynamic)\):
+ | Transports\ \((?:built-in|dynamic)\):
| Malware:
| log\ selectors\ =
| cwd=
next if /lock(?:ing|ed) .*\/spool\/db\/[^.]+\.lockfile$/;
s/closed hints database\K and lockfile$//;
+ # Hints DBs with transactions are provider-dependent, and flow changes
+ # to take advantage of them need different opens and different flags.
+ # Drop all the debug output for opens and closes.
+ if (/EXIM_DBOPEN(_MULTI)?: file <.*spool\/db\/retry>/)
+ {
+ $_ = <IN>;
+ next if (/returned from EXIM_DBOPEN(_MULTI)?: 0x[[:xdigit:]]+$/);
+ $_ = <IN>;
+ <IN> if (/returned from EXIM_DBOPEN(_MULTI)?: \(nil\)$/);
+ next;
+ }
+ if (/EXIM_DBCLOSE(_MULTI)?/) { <IN>; next; }
+ next if /retaining retry hintsdb handle$/;
+ next if /using cached retry hintsdb (?:handle|nonpresence)$/;
+ if (/final close of cached retry db$/) { <IN>; <IN>; next; }
+ next if /dbfn_transaction_(?:start|commit)$/;
+
+ # Various hintsdb backends
+ s/(?:bdb|tdb|gdbm|ndbm|sqlite)
+ _open\(flags\ 0x(\d)
+ \ mode\ 0640\)
+ \ (?:No\ such\ file\ or\ directory|unable\ to\ open\ database\ file)$
+ /hintsdb_open(flags 0x$1 mode 0640) No such file or directory/x;
+
# Lines with a leading pid. Only handle >= 4-digit PIDs to avoid converting SMTP respose codes
s/^\s*(\d{4,})\s(?!(?:previous message|in\s|bytes remain in|SMTP accept process running))/new_value($1, "p%s", \$next_pid) . ' '/e;
+ # Connection IDs
+ s/connection_id: \K(\d+)$/new_value($1, "conn%s", \$next_conn)/e;
+
# Debugging lines for Exim terminations and process-generation
next if /(?:postfork: | fork(?:ing|ed) for )/;
# Lookups have a char which depends on the number of lookup types compiled in,
# in stderr output. Replace with a "0". Recognising this while avoiding
# other output is fragile; perhaps the debug output should be revised instead.
- s%^\s+(:?closing )?\K[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
+ s%^\s+(?:closing )?\K[0-Z]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
# drop gnutls version strings
next if /GnuTLS compile-time version: \d+[\.\d]+$/;
next if /^tls_set_watch\(\) fail on '\/usr\/(?:lib\/ssl|local\/openssl3\/etc\/pki\/tls)\/cert.pem': No such file or directory$/;
# drop lookups
- next if /^$time_pid?(?: Lookups\ \(built-in\):
- | Loading\ lookup\ modules\ from
- | Loaded\ \d+\ lookup\ modules
- | Total\ \d+\ lookups)/x;
+ next if /(?: Lookups\ \((?:built-in|dynamic)\):
+ | searchtype\ \w+\ not\ initially\ found
+ | Loaded\ "\w+"\ \(\d+\ lookup\ types?\)
+ | Loading\ lookup\ modules\ from
+ | Loaded\ \d+\ lookup\ modules
+ | Total\ \d+\ built-in\ lookups)/x;
+
+ # drop loads of dyn-module drivers
+ next if /^$time_pid?(?:Loading\ \w+\ (?:router|transport|auth)\ driver\ from
+ | Loaded\ \w+\ (?:router|transport|auth)$)/x;
# drop compiler information
next if /^$time_pid?Compiler:/;
# different libraries will have different numbers (possibly 0) of follow-up
# lines, indenting with more data
if (/^$time_pid?Library version:/) {
- while (1) {
+ $_ = <IN>;
+ if (/^$time_pid?\s/) {
$_ = <IN>;
- next if /^$time_pid?\s/;
- goto RESET_AFTER_EXTRA_LINE_READ;
+ if (/^$time_pid?\s/) {
+ $_ = <IN>;
+ }
}
+ goto RESET_AFTER_EXTRA_LINE_READ;
}
# drop other build-time controls emitted for debugging
next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
\sno\s\((option\sunset|end\sof\slist)\)/x;
+ # non-TLS builds cannot have DANE
+
+ next if /lack of DNSSEC traceability precludes DANE$/;
+
# Skip auxiliary group lists because they will vary.
next if /auxiliary group list:/;
next if /failed to load readline:/;
- # Some DBM libraries seem to make DBM files on opening with O_RDWR without
- # O_CREAT; other's don't. In the latter case there is some debugging output
- # which is not present in the former. Skip the relevant lines (there are
- # three of them).
-
- if (/returned from EXIM_DBOPEN: \(nil\)/)
- {
- $_ .= <IN>;
- s?\Q$parm_cwd\E?TESTSUITE?g;
- if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
- { $_ = <IN>; next; }
- }
-
# Some tests turn on +expand debugging to check on expansions.
# Unfortunately, the Received: expansion varies, depending on whether TLS
# is compiled or not. So we must remove the relevant debugging if it is.
}
# Different builds will have different lookup types included
- s/search_type \K\d+ \((\w+)\) quoting -1 \(none\)$/NN ($1) quoting -1 (none)/;
# and different numbers of lookup types result in different type-code letters,
# so convert them all to "0"
s%(?<!lsearch)[^ ](?=TESTSUITE/aux-fixed/(?:0414.list[12]|0464.domains)$)%0%;
+ # Environment cleaning
+ next if /\w+ in keep_environment\? (yes|no)/;
+
+ # Sizes vary with test hostname
+ s/^cmd buf flush \d+ bytes/cmd buf flush ddd bytes/;
+
+ # Different platforms put different error messages into retry records
+ s/dbfn_write: key=.* datalen \K\d{2,3}$/nn/;
+ s/dbfn_read: size \K\d{2,3}(?= return$)/nnn/;
+
+ # Spool filesystem free space changes on different systems.
+ s/((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
+
# CONTENT_SCAN
next if /try option acl_(?:not_)?smtp_mime$/;
next if /in tls_resumption_hosts\?/;
next if /RE '.outlook.com/;
- # Environment cleaning
- next if /\w+ in keep_environment\? (yes|no)/;
-
- # Sizes vary with test hostname
- s/^cmd buf flush \d+ bytes/cmd buf flush ddd bytes/;
-
- # Spool filesystem free space changes on different systems.
- s/((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
-
# Non-TLS builds have different expansions for received_header_text
if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
{
next if /^DKIM >> Body data for hash, canonicalized/;
# Not all platforms build with SPF enabled
- next if /(^spf_conn_init|^SPF_dns_exim_new|spf_compile\.c)/;
+ next if /(^$time_pid?spf_conn_init|spf_compile\.c)/;
next if /try option spf_smtp_comment_template$/;
+ next if /loading module '(?:dkim|dmarc|spf)'$/;
+ next if /^$time_pid?Loaded "(?:dkim|dmarc|spf)"$/;
# Not all platforms have sendfile support
next if /^cannot use sendfile for body: no support$/;
}
# Specific pointer values reported for DB operations change from run to run
- s/^(\s*returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
- s/^(\s*EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+ s/(returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+ s/(EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
# Platform-dependent output during MySQL startup
next if /PerconaFT file system space/;
###################
# The "dbmbuild" command runs exim_dbmbuild. This is used both to test the
-# utility and to make DBM files for testing DBM lookups.
+# utility and to make hintsdb files for testing hintsdb lookups.
if (/^dbmbuild\s+(\S+)\s+(\S+)/)
{
# The "dump" command runs exim_dumpdb. On different systems, the output for
# some types of dump may appear in a different order because it's just hauled
-# out of the DBM file. We can solve this by sorting. Ignore the leading
+# out of the hintsdb file. We can solve this by sorting. Ignore the leading
# date/time, as it will be flattened later during munging.
if (/^dump\s+(\S+)/)
%parm_support = @temp;
}
- elsif (/^Lookups \(built-in\): (.*)/)
+ elsif (/^Lookups \((?:built-in|dynamic)\): ?(.*)/)
{
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
- %parm_lookups = @temp;
+ my %temp_lookups = @temp;
+ @parm_lookups{keys %temp_lookups} = values %temp_lookups;
}
- elsif (/^Authenticators: (.*)/)
+ elsif (/^Authenticators \((?:built-in|dynamic)\): ?(.*)/)
{
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
- %parm_authenticators = @temp;
+ my %temp_auths= @temp;
+ @parm_authenticators{keys %temp_auths} = values %temp_auths;
}
- elsif (/^Routers: (.*)/)
+ elsif (/^Routers \((?:built-in|dynamic)\): ?(.*)/)
{
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
- %parm_routers = @temp;
+ my %temp_routers = @temp;
+ @parm_routers{keys %temp_routers} = values %temp_routers;
}
# Some transports have options, e.g. appendfile/maildir. For those, ensure
# that the basic transport name is set, and then the name with each of the
# options.
- elsif (/^Transports: (.*)/)
+ elsif (/^Transports \((?:built-in|dynamic)\): (.*)/)
{
print;
@temp = split /(\s+)/, $1;
my($i,$k);
push(@temp, ' ');
- %parm_transports = @temp;
+ my %temp_transports = @temp;
+ @parm_transports{keys %temp_transports} = values %temp_transports;
+
foreach $k (keys %parm_transports)
{
if ($k =~ "/")
"sudo chgrp $parm_eximgroup eximdir/exim_exim;" .
"sudo chmod 06755 eximdir/exim_exim");
+# Copy any libraries that were built for dynamic load
+
+($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?;
+
+while (my $file = glob("$parm_exim_dir/dynmodules/*.so")) {
+ my $base = basename($file);
+ cp("$file", "eximdir/");
+ system("sudo chmod 755 eximdir/$base");
+ }
+
##################################################
# Make copies of utilities we might need #
##################################################
# Certain of the tests make use of some of Exim's utilities. We do not need
# to be root to copy these.
-($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?;
-
$dbm_build_deleted = 0;
if (defined $parm_lookups{dbm} && not cp("$parm_exim_dir/exim_dbmbuild", "eximdir/exim_dbmbuild"))
{
$next_msgid = "aX";
$next_pid = 1234;
$next_port = 1111;
+ $next_conn = 1111;
$message_skip = 0;
$msglog_skip = 0;
$munge_skip = 0;
git://git.exim.org / exim.git / blobdiff