-$Cambridge: exim/src/README.UPDATING,v 1.2 2005/01/11 15:15:33 ph10 Exp $
+$Cambridge: exim/src/README.UPDATING,v 1.15 2006/10/23 09:14:50 ph10 Exp $
This document contains detailed information about incompatibilities that might
be encountered when upgrading from one release of Exim to another. The
that might affect a running system.
+Exim version 4.64
+-----------------
+
+1. Callouts were setting the name used for EHLO/HELO from $smtp_active_
+hostname. This is wrong, because it relates to the incoming message (and
+probably the interface on which it is arriving) and not to the outgoing
+callout (which could be using a different interface). This has been
+changed to use the value of the helo_data option from the smtp transport
+instead - this is what is used when a message is actually being sent. If
+there is no remote transport (possible with a router that sets up host
+addresses), $smtp_active_hostname is used. This change is mentioned here in
+case somebody is relying on the use of $smtp_active_hostname.
+
+2. A bug has been fixed that might just possibly be something that is relied on
+in some configurations. In expansion items such as ${if >{xxx}{yyy}...} an
+empty string (that is {}) was being interpreted as if it was {0} and therefore
+treated as the number zero. From release 4.64, such strings cause an error
+because a decimal number, possibly followed by K or M, is required (as has
+always been documented).
+
+3. There has been a change to the GnuTLS support (ChangeLog/PH/20) to improve
+Exim's performance. Unfortunately, this has the side effect of being slightly
+non-upwards compatible for versions 4.50 and earlier. If you are upgrading from
+one of these earlier versions and you use GnuTLS, you must remove the file
+called gnutls-params in Exim's spool directory. If you don't do this, you will
+see this error:
+
+ TLS error on connection from ... (DH params import): Base64 decoding error.
+
+Removing the file causes Exim to recompute the relevant encryption parameters
+and cache them in the new format that was introduced for release 4.51 (May
+2005). If you are upgrading from release 4.51 or later, there should be no
+problem.
+
+
+Exim version 4.63
+-----------------
+
+When an SMTP error message is specified in a "message" modifier in an ACL, or
+in a :fail: or :defer: message in a redirect router, Exim now checks the start
+of the message for an SMTP error code. This consists of three digits followed
+by a space, optionally followed by an extended code of the form n.n.n, also
+followed by a space. If this is the case and the very first digit is the same
+as the default error code, the code from the message is used instead. If the
+very first digit is incorrect, a panic error is logged, and the default code is
+used. This is an incompatible change, but it is not expected to affect many (if
+any) configurations. It is possible to suppress the use of the supplied code in
+a redirect router by setting the smtp_error_code option false. In this case,
+any SMTP code is quietly ignored.
+
+
+Exim version 4.61
+-----------------
+
+1. The default number of ACL variables of each type has been increased to 20,
+and it's possible to compile Exim with more. You can safely upgrade to this
+release if you already have messages on the queue with saved ACL variable
+values. However, if you downgrade from this release with messages on the queue,
+any saved ACL values they may have will be lost.
+
+2. The default value for rfc1413_query_timeout has been changed from 30s to 5s.
+
+
+Exim version 4.54
+-----------------
+
+There was a problem with 4.52/TF/02 in that a "name=" option on control=
+submission terminated at the next slash, thereby not allowing for slashes in
+the name. This has been changed so that "name=" takes the rest of the string as
+its data. It must therefore be the last option.
+
+
+Version 4.53
+------------
+
+If you are using the experimental Domain Keys support, you must upgrade to
+at least libdomainkeys 0.67 in order to run this release of Exim.
+
+
+Version 4.51
+------------
+
+1. The format in which GnuTLS parameters are cached (in the file gnutls-params
+in the spool directory) has been changed. The new format can also be generated
+externally, so it is now possible to update the values from outside Exim. This
+has been implemented in an upwards, BUT NOT downwards, compatible manner.
+Upgrading should be seamless: when Exim finds that it cannot understand an
+existing cache file, it generates new parameters and writes them to the cache
+in the new format. If, however, you downgrade from 4.51 to a previous release,
+you MUST delete the gnutls-params file in the spool directory, because the
+older Exim will not recognize the new format.
+
+2. When doing a callout as part of verifying an address, Exim was not paying
+attention to any local part prefix or suffix that was matched by the router
+that accepted the address. It now behaves in the same way as it does for
+delivery: the affixes are removed from the local part unless
+rcpt_include_affixes is set on the transport. If you have a configuration that
+uses prefixes or suffixes on addresses that could be used for callouts, and you
+want the affixes to be retained, you must make sure that rcpt_include_affixes
+is set on the transport.
+
+3. Bounce and delay warning messages no longer contain details of delivery
+errors, except for explicit messages (e.g. generated by :fail:) and SMTP
+responses from remote hosts.
+
+
Version 4.50
------------
-The exicyclog script has been updated to use three-digit numbers in rotated log
-files if the maximum number to keep is greater than 99. If you are already
-keeping more than 99, there will be an incompatible change when you upgrade.
-You will probably want to rename your old log files to the new form before
-running the new exicyclog. The following script, by Mick Swisher, can do this
-for you:
-
-# Begin conversion
-# Rename all the old files by adding additional leading zeros.
-count=99
-while [ $count -gt 0 ]; do
-if [ $count -lt 100 ]; then newt=0$count; oldt=$count; fi
-if [ $count -lt 10 ]; then newt=00$count; oldt=0$count; fi
-if [ -f $mainlog.$oldt ]; then
- $mv $mainlog.$oldt $mainlog.$newt
-elif [ -f $mainlog.$oldt.$suffix ]; then
- $mv $mainlog.$oldt.$suffix $mainlog.$newt.$suffix
-fi
-if [ -f $rejectlog.$oldt ]; then
- $mv $rejectlog.$oldt $rejectlog.$newt
-elif [ -f $rejectlog.$oldt.$suffix ]; then
- $mv $rejectlog.$oldt.$suffix $rejectlog.$newt.$suffix
-fi
-count=`expr $count - 1`
-done
+The exicyclog script has been updated to use three-digit numbers in rotated log
+files if the maximum number to keep is greater than 99. If you are already
+keeping more than 99, there will be an incompatible change when you upgrade.
+You will probably want to rename your old log files to the new form before
+running the new exicyclog.
Version 4.42
git://git.exim.org / exim.git / blobdiff