Testsuite: Add doc for PORT_DYNAMIC
[exim.git] / test / stderr / 0002
index 245d3904af540d765457ba1820b01389a51e3cbb..e7c70cfbfde40bbb82719141cbb865c5af7e4a2f 100644 (file)
 Exim version x.yz ....
 configuration file is TESTSUITE/test-config
 admin user
-expanding: primary_hostname: $primary_hostname
-   result: primary_hostname: myhost.test.ex
-expanding: abcd
-   result: abcd
-expanding: \N^([ab]+)(\w+)$\N
-   result: ^([ab]+)(\w+)$
-condition: match{abcd}{\N^([ab]+)(\w+)$\N}
-   result: true
-expanding: $2$1
-   result: cdab
-expanding: match:  ${if match{abcd}{\N^([ab]+)(\w+)$\N}{$2$1}fail}
-   result: match:  cdab
-expanding: wxyz
-   result: wxyz
-expanding: \N^([ab]+)(\w+)$\N
-   result: ^([ab]+)(\w+)$
-condition: match{wxyz}{\N^([ab]+)(\w+)$\N}
-   result: false
-expanding: $2$1
-   result: 
-skipping: result is not used
+considering: primary_hostname: $primary_hostname
+  expanding: primary_hostname: $primary_hostname
+     result: primary_hostname: myhost.test.ex
+considering: match:  ${if match{abcd}{\N^([ab]+)(\w+)$\N}{$2$1}fail}
+considering: abcd}{\N^([ab]+)(\w+)$\N}{$2$1}fail}
+  expanding: abcd
+     result: abcd
+considering: \N^([ab]+)(\w+)$\N}{$2$1}fail}
+  expanding: \N^([ab]+)(\w+)$\N
+     result: ^([ab]+)(\w+)$
+  condition: match{abcd}{\N^([ab]+)(\w+)$\N}
+     result: true
+considering: $2$1}fail}
+  expanding: $2$1
+     result: cdab
+  expanding: match:  ${if match{abcd}{\N^([ab]+)(\w+)$\N}{$2$1}fail}
+     result: match:  cdab
+considering: match:  ${if match{wxyz}{\N^([ab]+)(\w+)$\N}{$2$1}fail}
+considering: wxyz}{\N^([ab]+)(\w+)$\N}{$2$1}fail}
+  expanding: wxyz
+     result: wxyz
+considering: \N^([ab]+)(\w+)$\N}{$2$1}fail}
+  expanding: \N^([ab]+)(\w+)$\N
+     result: ^([ab]+)(\w+)$
+  condition: match{wxyz}{\N^([ab]+)(\w+)$\N}
+     result: false
+   scanning: $2$1}fail}
+  expanding: $2$1
+     result: 
+   skipping: result is not used
 failed to expand: match:  ${if match{wxyz}{\N^([ab]+)(\w+)$\N}{$2$1}fail}
    error message: "if" failed and "fail" requested
 failure was forced
-expanding: 1
-   result: 1
-expanding: 1
-   result: 1
-condition: eq {1}{1}
-   result: true
-expanding: yes
-   result: yes
-expanding: xx
-   result: xx
-skipping: result is not used
-expanding: /non/exist
-   result: /non/exist
-skipping: result is not used
-expanding: ${lookup{xx}lsearch{/non/exist}}
-   result: 
-skipping: result is not used
-expanding: ${if eq {1}{1}{yes}{${lookup{xx}lsearch{/non/exist}}}}
-   result: yes
-expanding: a.b.c
-   result: a.b.c
-expanding: a.b.c
-   result: a.b.c
+considering: ${if eq {1}{1}{yes}{${lookup{xx}lsearch{/non/exist}}}}
+considering: 1}{1}{yes}{${lookup{xx}lsearch{/non/exist}}}}
+  expanding: 1
+     result: 1
+considering: 1}{yes}{${lookup{xx}lsearch{/non/exist}}}}
+  expanding: 1
+     result: 1
+  condition: eq {1}{1}
+     result: true
+considering: yes}{${lookup{xx}lsearch{/non/exist}}}}
+  expanding: yes
+     result: yes
+   scanning: ${lookup{xx}lsearch{/non/exist}}}}
+   scanning: xx}lsearch{/non/exist}}}}
+  expanding: xx
+     result: xx
+   skipping: result is not used
+   scanning: /non/exist}}}}
+  expanding: /non/exist
+     result: /non/exist
+   skipping: result is not used
+  expanding: ${lookup{xx}lsearch{/non/exist}}
+     result: 
+   skipping: result is not used
+  expanding: ${if eq {1}{1}{yes}{${lookup{xx}lsearch{/non/exist}}}}
+     result: yes
+considering: match_address:   ${if match_address{a.b.c}{a.b.c}{yes}{no}}
+considering: a.b.c}{a.b.c}{yes}{no}}
+  expanding: a.b.c
+     result: a.b.c
+considering: a.b.c}{yes}{no}}
+  expanding: a.b.c
+     result: a.b.c
 LOG: MAIN PANIC
   no @ found in the subject of an address list match: subject="a.b.c" pattern="a.b.c"
-condition: match_address{a.b.c}{a.b.c}
-   result: false
-expanding: yes
-   result: yes
-skipping: result is not used
-expanding: no
-   result: no
-expanding: match_address:   ${if match_address{a.b.c}{a.b.c}{yes}{no}}
-   result: match_address:   no
+  condition: match_address{a.b.c}{a.b.c}
+     result: false
+   scanning: yes}{no}}
+  expanding: yes
+     result: yes
+   skipping: result is not used
+considering: no}}
+  expanding: no
+     result: no
+  expanding: match_address:   ${if match_address{a.b.c}{a.b.c}{yes}{no}}
+     result: match_address:   no
 >>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
 Exim version x.yz ....
 configuration file is TESTSUITE/test-config
 admin user
-expanding: -oMa  sender_host_address = $sender_host_address
-   result: -oMa  sender_host_address = V4NET.0.0.1
-expanding:       sender_host_port = $sender_host_port
-   result:       sender_host_port = 1234
-expanding: -oMaa sender_host_authenticated = $sender_host_authenticated
-   result: -oMaa sender_host_authenticated = AAA
-expanding: -oMai authenticated_id = $authenticated_id
-   result: -oMai authenticated_id = philip
-expanding: -oMas authenticated_sender = $authenticated_sender
-   result: -oMas authenticated_sender = xx@yy.zz
-expanding: -oMi  interface_address = $interface_address
-   result: -oMi  interface_address = 1.1.1.1
-expanding:       interface_port = $interface_port
-   result:       interface_port = 99
-expanding: -oMr  received_protocol = $received_protocol
-   result: -oMr  received_protocol = special
-expanding: -oMt  sender_ident = $sender_ident
-   result: -oMt  sender_ident = me
+considering: -oMa  sender_host_address = $sender_host_address
+  expanding: -oMa  sender_host_address = $sender_host_address
+     result: -oMa  sender_host_address = V4NET.0.0.1
+considering:       sender_host_port = $sender_host_port
+  expanding:       sender_host_port = $sender_host_port
+     result:       sender_host_port = 1234
+considering: -oMaa sender_host_authenticated = $sender_host_authenticated
+  expanding: -oMaa sender_host_authenticated = $sender_host_authenticated
+     result: -oMaa sender_host_authenticated = AAA
+considering: -oMai authenticated_id = $authenticated_id
+  expanding: -oMai authenticated_id = $authenticated_id
+     result: -oMai authenticated_id = philip
+considering: -oMas authenticated_sender = $authenticated_sender
+  expanding: -oMas authenticated_sender = $authenticated_sender
+     result: -oMas authenticated_sender = xx@yy.zz
+considering: -oMi  interface_address = $interface_address
+  expanding: -oMi  interface_address = $interface_address
+     result: -oMi  interface_address = 1.1.1.1
+considering:       interface_port = $interface_port
+  expanding:       interface_port = $interface_port
+     result:       interface_port = 99
+considering: -oMr  received_protocol = $received_protocol
+  expanding: -oMr  received_protocol = $received_protocol
+     result: -oMr  received_protocol = special
+considering: -oMt  sender_ident = $sender_ident
+  expanding: -oMt  sender_ident = $sender_ident
+     result: -oMt  sender_ident = me
 >>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
 1999-03-02 09:44:33 no host name found for IP address V4NET.11.12.13
 Exim version x.yz ....
 configuration file is TESTSUITE/test-config
 admin user
-expanding: -oMa  sender_host_address = $sender_host_address
-   result: -oMa  sender_host_address = V4NET.0.0.1
-expanding:       sender_host_port = $sender_host_port
-   result:       sender_host_port = 1234
-expanding: -oMaa sender_host_authenticated = $sender_host_authenticated
-   result: -oMaa sender_host_authenticated = AAA
-expanding: -oMai authenticated_id = $authenticated_id
-   result: -oMai authenticated_id = philip
-expanding: -oMas authenticated_sender = $authenticated_sender
-   result: -oMas authenticated_sender = xx@yy.zz
-expanding: -oMi  interface_address = $interface_address
-   result: -oMi  interface_address = 1.1.1.1
-expanding:       interface_port = $interface_port
-   result:       interface_port = 99
-expanding: -oMr  received_protocol = $received_protocol
-   result: -oMr  received_protocol = special
-expanding: black
-   result: black
-expanding: white
-   result: white
-condition: eq{black}{white}
-   result: false
-expanding: $sender_host_name
-   result: 
-skipping: result is not used
-expanding: No
-   result: No
-expanding: ----> No lookup yet: ${if eq{black}{white}{$sender_host_name}{No}}
-   result: ----> No lookup yet: No
+considering: -oMa  sender_host_address = $sender_host_address
+  expanding: -oMa  sender_host_address = $sender_host_address
+     result: -oMa  sender_host_address = V4NET.0.0.1
+considering:       sender_host_port = $sender_host_port
+  expanding:       sender_host_port = $sender_host_port
+     result:       sender_host_port = 1234
+considering: -oMaa sender_host_authenticated = $sender_host_authenticated
+  expanding: -oMaa sender_host_authenticated = $sender_host_authenticated
+     result: -oMaa sender_host_authenticated = AAA
+considering: -oMai authenticated_id = $authenticated_id
+  expanding: -oMai authenticated_id = $authenticated_id
+     result: -oMai authenticated_id = philip
+considering: -oMas authenticated_sender = $authenticated_sender
+  expanding: -oMas authenticated_sender = $authenticated_sender
+     result: -oMas authenticated_sender = xx@yy.zz
+considering: -oMi  interface_address = $interface_address
+  expanding: -oMi  interface_address = $interface_address
+     result: -oMi  interface_address = 1.1.1.1
+considering:       interface_port = $interface_port
+  expanding:       interface_port = $interface_port
+     result:       interface_port = 99
+considering: -oMr  received_protocol = $received_protocol
+  expanding: -oMr  received_protocol = $received_protocol
+     result: -oMr  received_protocol = special
+considering: ----> No lookup yet: ${if eq{black}{white}{$sender_host_name}{No}}
+considering: black}{white}{$sender_host_name}{No}}
+  expanding: black
+     result: black
+considering: white}{$sender_host_name}{No}}
+  expanding: white
+     result: white
+  condition: eq{black}{white}
+     result: false
+   scanning: $sender_host_name}{No}}
+  expanding: $sender_host_name
+     result: 
+   skipping: result is not used
+considering: No}}
+  expanding: No
+     result: No
+  expanding: ----> No lookup yet: ${if eq{black}{white}{$sender_host_name}{No}}
+     result: ----> No lookup yet: No
+considering: -oMs  sender_host_name = $sender_host_name
 looking up host name for V4NET.0.0.1
-IP address lookup yielded ten-1.test.ex
-using host_fake_gethostbyname for ten-1.test.ex (IPv4)
-MUNGED: ::1 will be omitted in what follows
-get[host|ipnode]byname[2] looked up these IP addresses:
-  name=ten-1.test.ex address=V4NET.0.0.1
+IP address lookup yielded "ten-1.test.ex"
+ten-1.test.ex V4NET.0.0.1 mx=-1 sort=xx 
 checking addresses for ten-1.test.ex
   V4NET.0.0.1 OK
 sender_fullhost = ten-1.test.ex [V4NET.0.0.1]
 sender_rcvhost = ten-1.test.ex ([V4NET.0.0.1] ident=me)
-expanding: -oMs  sender_host_name = $sender_host_name
-   result: -oMs  sender_host_name = ten-1.test.ex
-expanding: -oMt  sender_ident = $sender_ident
-   result: -oMt  sender_ident = me
+  expanding: -oMs  sender_host_name = $sender_host_name
+     result: -oMs  sender_host_name = ten-1.test.ex
+considering: -oMt  sender_ident = $sender_ident
+  expanding: -oMt  sender_ident = $sender_ident
+     result: -oMt  sender_ident = me
 >>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
 Exim version x.yz ....
 changed uid/gid: forcing real = effective
@@ -154,19 +196,17 @@ host in helo_try_verify_hosts? no (option unset)
 host in helo_accept_junk_hosts? no (option unset)
 using ACL "connect1"
 processing "deny"
-check hosts = partial-lsearch;TESTSUITE/aux-fixed/0002.lsearch
+check hosts = <\n partial-lsearch;TESTSUITE/aux-fixed/0002.lsearch \n 1.2.3.4
 sender host name required, to match against partial-lsearch;TESTSUITE/aux-fixed/0002.lsearch
 looking up host name for V4NET.0.0.1
 DNS lookup of 1.0.0.V4NET.in-addr.arpa (PTR) using fakens
 DNS lookup of 1.0.0.V4NET.in-addr.arpa (PTR) succeeded
-IP address lookup yielded ten-1.test.ex
-using host_fake_gethostbyname for ten-1.test.ex (IPv4)
+IP address lookup yielded "ten-1.test.ex"
 DNS lookup of ten-1.test.ex (A) using fakens
 DNS lookup of ten-1.test.ex (A) succeeded
-MUNGED: ::1 will be omitted in what follows
-get[host|ipnode]byname[2] looked up these IP addresses:
-  name=ten-1.test.ex address=V4NET.0.0.1
+ten-1.test.ex V4NET.0.0.1 mx=-1 sort=xx 
 checking addresses for ten-1.test.ex
+Forward DNS security status: unverified
   V4NET.0.0.1 OK
 sender_fullhost = ten-1.test.ex [V4NET.0.0.1]
 sender_rcvhost = ten-1.test.ex ([V4NET.0.0.1])
@@ -174,17 +214,20 @@ search_open: lsearch "TESTSUITE/aux-fixed/0002.lsearch"
 search_find: file="TESTSUITE/aux-fixed/0002.lsearch"
   key="ten-1.test.ex" partial=2 affix=*. starflags=0
 LRU list:
-  :TESTSUITE/aux-fixed/0002.lsearch
+  0TESTSUITE/aux-fixed/0002.lsearch
   End
 internal_search_find: file="TESTSUITE/aux-fixed/0002.lsearch"
   type=lsearch key="ten-1.test.ex"
 file lookup required for ten-1.test.ex
   in TESTSUITE/aux-fixed/0002.lsearch
 lookup yielded: 
-host in "partial-lsearch;TESTSUITE/aux-fixed/0002.lsearch"? yes (matched "partial-lsearch;TESTSUITE/aux-fixed/0002.lsearch")
-deny: condition test succeeded
-SMTP>> 550 Administrative prohibition\r
-LOG: MAIN REJECT
+host in "<
+ partial-lsearch;TESTSUITE/aux-fixed/0002.lsearch 
+ 1.2.3.4"? yes (matched "partial-lsearch;TESTSUITE/aux-fixed/0002.lsearch")
+deny: condition test succeeded in ACL "connect1"
+end of ACL "connect1": DENY
+SMTP>> 550 Administrative prohibition
+LOG: connection_reject MAIN REJECT
   H=ten-1.test.ex [V4NET.0.0.1] rejected connection in "connect" ACL
 search_tidyup called
 >>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
@@ -217,7 +260,7 @@ search_open: lsearch "TESTSUITE/aux-fixed/0002.lsearch"
 search_find: file="TESTSUITE/aux-fixed/0002.lsearch"
   key="V4NET.0.0.2" partial=-1 affix=NULL starflags=0
 LRU list:
-  :TESTSUITE/aux-fixed/0002.lsearch
+  0TESTSUITE/aux-fixed/0002.lsearch
   End
 internal_search_find: file="TESTSUITE/aux-fixed/0002.lsearch"
   type=lsearch key="V4NET.0.0.2"
@@ -225,10 +268,10 @@ file lookup required for V4NET.0.0.2
   in TESTSUITE/aux-fixed/0002.lsearch
 lookup failed
 host in "net-lsearch;TESTSUITE/aux-fixed/0002.lsearch"? no (end of list)
-deny: condition test failed
+deny: condition test failed in ACL "connect2"
 end of ACL "connect2": implicit DENY
-SMTP>> 550 Administrative prohibition\r
-LOG: MAIN REJECT
+SMTP>> 550 Administrative prohibition
+LOG: connection_reject MAIN REJECT
   H=[V4NET.0.0.2] rejected connection in "connect" ACL
 search_tidyup called
 >>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>
@@ -242,65 +285,81 @@ search_tidyup called
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> using ACL "connect0"
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in ACL "connect0"
+>>> end of ACL "connect0": ACCEPT
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in inline ACL
+>>> end of inline ACL: ACCEPT
 >>> using ACL "check_data"
 >>> processing "warn"
 >>> check logwrite = Subject is: "$h_subject:"
 >>>                = Subject is: ""
 LOG: 10HmaX-0005vi-00 Subject is: ""
->>> warn: condition test succeeded
+>>> warn: condition test succeeded in ACL "check_data"
 >>> processing "deny"
->>> deny: condition test succeeded
+>>>   message: reply_address=<$reply_address>
+>>> deny: condition test succeeded in ACL "check_data"
+>>> end of ACL "check_data": DENY
 LOG: 10HmaX-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<>
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in inline ACL
+>>> end of inline ACL: ACCEPT
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> processing "warn"
 >>> check logwrite = Subject is: "$h_subject:"
 >>>                = Subject is: ""
 LOG: 10HmaY-0005vi-00 Subject is: ""
->>> warn: condition test succeeded
+>>> warn: condition test succeeded in ACL "check_data"
 >>> processing "deny"
->>> deny: condition test succeeded
+>>>   message: reply_address=<$reply_address>
+>>> deny: condition test succeeded in ACL "check_data"
+>>> end of ACL "check_data": DENY
 LOG: 10HmaY-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<a@b>
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in inline ACL
+>>> end of inline ACL: ACCEPT
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> processing "warn"
 >>> check logwrite = Subject is: "$h_subject:"
 >>>                = Subject is: ""
 LOG: 10HmaZ-0005vi-00 Subject is: ""
->>> warn: condition test succeeded
+>>> warn: condition test succeeded in ACL "check_data"
 >>> processing "deny"
->>> deny: condition test succeeded
+>>>   message: reply_address=<$reply_address>
+>>> deny: condition test succeeded in ACL "check_data"
+>>> end of ACL "check_data": DENY
 LOG: 10HmaZ-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<c@d>
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in inline ACL
+>>> end of inline ACL: ACCEPT
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> processing "warn"
 >>> check logwrite = Subject is: "$h_subject:"
 >>>                = Subject is: ""
 LOG: 10HmbA-0005vi-00 Subject is: ""
->>> warn: condition test succeeded
+>>> warn: condition test succeeded in ACL "check_data"
 >>> processing "deny"
->>> deny: condition test succeeded
+>>>   message: reply_address=<$reply_address>
+>>> deny: condition test succeeded in ACL "check_data"
+>>> end of ACL "check_data": DENY
 LOG: 10HmbA-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<>
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in inline ACL
+>>> end of inline ACL: ACCEPT
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> processing "warn"
 >>> check logwrite = Subject is: "$h_subject:"
 >>>                = Subject is: ""
 LOG: 10HmbB-0005vi-00 Subject is: ""
->>> warn: condition test succeeded
+>>> warn: condition test succeeded in ACL "check_data"
 >>> processing "deny"
->>> deny: condition test succeeded
+>>>   message: reply_address=<$reply_address>
+>>> deny: condition test succeeded in ACL "check_data"
+>>> end of ACL "check_data": DENY
 LOG: 10HmbB-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<x@y>
 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
@@ -312,18 +371,22 @@ LOG: 10HmbB-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<x
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> using ACL "connect0"
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in ACL "connect0"
+>>> end of ACL "connect0": ACCEPT
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in inline ACL
+>>> end of inline ACL: ACCEPT
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> processing "warn"
 >>> check logwrite = Subject is: "$h_subject:"
 >>>                = Subject is: "=?iso-8859-8?Q?_here_we_go=3A_a_string_that_is_going_to_be_encoded=3A_it_will_go_over_the_75-char_limit_by_a_long_way=3B_in_fact_this_one_will_go_over_the_150_character_limit?="
 LOG: 10HmbC-0005vi-00 Subject is: "=?iso-8859-8?Q?_here_we_go=3A_a_string_that_is_going_to_be_encoded=3A_it_will_go_over_the_75-char_limit_by_a_long_way=3B_in_fact_this_one_will_go_over_the_150_character_limit?="
->>> warn: condition test succeeded
+>>> warn: condition test succeeded in ACL "check_data"
 >>> processing "deny"
->>> deny: condition test succeeded
+>>>   message: reply_address=<$reply_address>
+>>> deny: condition test succeeded in ACL "check_data"
+>>> end of ACL "check_data": DENY
 LOG: 10HmbC-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<>
 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
@@ -335,16 +398,31 @@ LOG: 10HmbC-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<>
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> using ACL "connect0"
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in ACL "connect0"
+>>> end of ACL "connect0": ACCEPT
 >>> processing "accept"
->>> accept: condition test succeeded
+>>> accept: condition test succeeded in inline ACL
+>>> end of inline ACL: ACCEPT
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> processing "warn"
 >>> check logwrite = Subject is: "$h_subject:"
 >>>                = Subject is: " here we go: a string that is going to be encoded: it will go over the 75-char limit by a long way; in fact this one will go over the 150 character limit"
 LOG: 10HmbD-0005vi-00 Subject is: " here we go: a string that is going to be encoded: it will go over the 75-char limit by a long way; in fact this one will go over the 150 character limit"
->>> warn: condition test succeeded
+>>> warn: condition test succeeded in ACL "check_data"
 >>> processing "deny"
->>> deny: condition test succeeded
+>>>   message: reply_address=<$reply_address>
+>>> deny: condition test succeeded in ACL "check_data"
+>>> end of ACL "check_data": DENY
 LOG: 10HmbD-0005vi-00 H=[V4NET.0.0.0] F=<> rejected after DATA: reply_address=<>
+Exim version x.yz ....
+changed uid/gid: -C, -D, -be or -bf forces real uid
+  uid=CALLER_UID gid=CALLER_GID pid=pppp
+configuration file is TESTSUITE/test-config
+admin user
+originator: uid=CALLER_UID gid=CALLER_GID login=CALLER name=CALLER_NAME
+sender address = CALLER@myhost.test.ex
+1.2.3.4 in "1.2.3"? no (malformed IPv4 address or address mask)
+1.2.3.4 in "1.2.3.4/abc"? no (malformed IPv4 address or address mask)
+search_tidyup called
+>>>>>>>>>>>>>>>> Exim pid=pppp terminating with rc=0 >>>>>>>>>>>>>>>>