In the default configuration, move the relay_from_hosts and

[exim.git] / doc / doc-txt / NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index 3d3c1d8e15184a5473ca07cdd30b5c4ad6c4fc45..bbf27010dd7149f9e4576ee7072d0d579c4cb85f 100644 (file)
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -1,4 +1,4 @@
-$Cambridge: exim/doc/doc-txt/NewStuff,v 1.69 2005/09/13 11:13:27 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/NewStuff,v 1.76 2005/10/03 13:25:32 ph10 Exp $

 
 New Features in Exim
 --------------------
 
 New Features in Exim
 --------------------


@@ -8,6 +8,16 @@ but have not yet made it into the main manual (which is most conveniently
 updated when there is a relatively large batch of changes). The doc/ChangeLog
 file contains a listing of all changes, including bug fixes.
 
 updated when there is a relatively large batch of changes). The doc/ChangeLog
 file contains a listing of all changes, including bug fixes.
 

+Exim version 4.54
+-----------------
+
+There was a problem with 4.52/TF/02 in that a "name=" option on control=
+submission terminated at the next slash, thereby not allowing for slashes in
+the name. This has been changed so that "name=" takes the rest of the string as
+its data. It must therefore be the last option.
+
+
+

 Exim version 4.53
 -----------------
 
 Exim version 4.53
 -----------------
 


@@ -151,6 +161,23 @@ PH/12 There is a new variable called $smtp_command which contains the full SMTP
       possible to distinguish between HELO and EHLO, and also between things
       like "MAIL FROM:<>" and "MAIL FROM: <>".
 
       possible to distinguish between HELO and EHLO, and also between things
       like "MAIL FROM:<>" and "MAIL FROM: <>".
 

+TF/01 There's a new script in util/ratelimit.pl which extracts sending
+      rates from log files, to assist with choosing appropriate settings
+      when deploying the ratelimit ACL condition.
+
+PH/13 A new letter, "H", is available in retry parameter sets. It is similar
+      to "G" (geometric increasing time intervals), except that the interval
+      before the next retry is randomized. Each time, the previous interval is
+      multiplied by the factor in order to get a maximum for the next interval.
+      The mininum interval is the first argument of the parameter, and an
+      actual interval is chosen randomly between them. Such a rule has been
+      found to be helpful in cluster configurations when all the members of the
+      cluster restart at once, and may synchronize their queue processing
+      times.
+
+PH/14 The options never_users, trusted_users, admin_groups, and trusted_groups
+      are now expanded when the configuration file is read.
+

 
 Exim version 4.52
 -----------------
 
 Exim version 4.52
 -----------------


@@ -287,7 +314,7 @@ TF/04 There is a new ratelimit ACL condition which can be used to measure
       rate limit. Conversely, if m and p are both small then messages must be
       sent at an even rate.
 
       rate limit. Conversely, if m and p are both small then messages must be
       sent at an even rate.
 

-      The key is used to look up the data used to calcluate the client's
+      The key is used to look up the data used to calculate the client's

       average sending rate. This data is stored in a database maintained by
       Exim in its spool directory alongside the retry database etc. For
       example, you can limit the sending rate of each authenticated user,
       average sending rate. This data is stored in a database maintained by
       Exim in its spool directory alongside the retry database etc. For
       example, you can limit the sending rate of each authenticated user,


@@ -302,7 +329,8 @@ TF/04 There is a new ratelimit ACL condition which can be used to measure
 
       Each ratelimit condition can have up to two options. The first option
       specifies what Exim measures the rate of, and the second specifies how
 
       Each ratelimit condition can have up to two options. The first option
       specifies what Exim measures the rate of, and the second specifies how

-      Exim handles excessively fast clients.
+      Exim handles excessively fast clients. The options are separated by a
+      slash, like the other parameters.

 
       The per_mail option means that it measures the client's rate of sending
       messages. This is the default if none of the per_* options is specified.
 
       The per_mail option means that it measures the client's rate of sending
       messages. This is the default if none of the per_* options is specified.


@@ -335,7 +363,12 @@ TF/04 There is a new ratelimit ACL condition which can be used to measure
       updated. The effect of this is that Exim measures the client's average
       rate of attempts to send email, which can be much higher than the
       maximum. If the client is over the limit it will be subjected to
       updated. The effect of this is that Exim measures the client's average
       rate of attempts to send email, which can be much higher than the
       maximum. If the client is over the limit it will be subjected to

-      counter-measures until it slows down below the maximum rate.
+      counter-measures until it slows down below the maximum rate. The
+      smoothing period determines the time it takes for a high sending rate
+      to decay exponentially to 37% of its peak value, which means that you
+      can work out the time (the number of smoothing periods) that a client
+      is subjected to counter-measures after an over-limit burst with the
+      formula ln(peakrate/maxrate).

 
       The leaky option means that the client's recorded rate is not updated
       if it is above the limit. The effect of this is that Exim measures the
 
       The leaky option means that the client's recorded rate is not updated
       if it is above the limit. The effect of this is that Exim measures the


@@ -358,13 +391,12 @@ TF/04 There is a new ratelimit ACL condition which can be used to measure
         # Log all senders' rates
         warn
           ratelimit = 0 / 1h / strict
         # Log all senders' rates
         warn
           ratelimit = 0 / 1h / strict

-          log_message = \
-            Sender rate $sender_rate > $sender_rate_limit / $sender_rate_period
+          log_message = Sender rate $sender_rate / $sender_rate_period

 
         # Slow down fast senders
         warn
           ratelimit = 100 / 1h / per_rcpt / strict
 
         # Slow down fast senders
         warn
           ratelimit = 100 / 1h / per_rcpt / strict

-          delay     = ${eval: 10 * ($sender_rate - $sender_rate_limit) }
+          delay     = ${eval: $sender_rate - $sender_rate_limit }s

 
         # Keep authenticated users under control
         deny
 
         # Keep authenticated users under control
         deny


@@ -378,8 +410,8 @@ TF/04 There is a new ratelimit ACL condition which can be used to measure
         # Restrict incoming rate from each host, with a default rate limit
         # set using a macro and special cases looked up in a table.
         defer
         # Restrict incoming rate from each host, with a default rate limit
         # set using a macro and special cases looked up in a table.
         defer

-          message = Sender rate $sender_rate exceeds \
-                    $sender_rate_limit messages per $sender_rate_period
+          message = Sender rate exceeds $sender_rate_limit \
+                    messages per $sender_rate_period

           ratelimit = ${lookup {$sender_host_address} \
                         cdb {DB/ratelimits.cdb} \
                         {$value} {RATELIMIT} }
           ratelimit = ${lookup {$sender_host_address} \
                         cdb {DB/ratelimits.cdb} \
                         {$value} {RATELIMIT} }