$cf = "bin/cf -exact";
$cr = "\r";
$debug = 0;
+$flavour = 'FOO';
$force_continue = 0;
$force_update = 0;
$log_failed_filename = "failed-summary.log";
$optargs = "";
$save_output = 0;
$server_opts = "";
-$flavour = 'FOO';
+$valgrind = 0;
$have_ipv4 = 1;
$have_ipv6 = 1;
# Manually set locale
$ENV{'LC_ALL'} = 'C';
+# In some environments USER does not exists, but we
+# need it for some test(s)
+$ENV{USER} = getpwuid($>)
+ if not exists $ENV{USER};
###############################################################################
# that are specific to certain file types, though there are also some of those
# inline too.
-while(<IN>)
+LINE: while(<IN>)
{
RESET_AFTER_EXTRA_LINE_READ:
# Custom munges
# File descriptor numbers may vary
s/^writing data block fd=\d+/writing data block fd=dddd/;
- s/running as transport filter: write=\d+ read=\d+/running as transport filter: write=dddd read=dddd/;
+ s/(running as transport filter:) fd_write=\d+ fd_read=\d+/$1 fd_write=dddd fd_read=dddd/;
# ======== Dumpdb output ========
s/waiting for children of \d+/waiting for children of pppp/;
s/waiting for (\S+) \(\d+\)/waiting for $1 (pppp)/;
+ # The spool header file name varies with PID
+ s%^(Writing spool header file: .*/hdr).[0-9]{1,5}%$1.pppp%;
+
# ======== Port numbers ========
# Incoming port numbers may vary, but not in daemon startup line.
# different wording in the error messages, so we cannot compare them.
s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+ next if /SSL verify error: depth=0 error=certificate not trusted/;
# ======== Maildir things ========
# timestamp output in maildir processing
next if /^SSL info: unknown state/;
next if /^SSL info: SSLv2\/v3 write client hello A/;
next if /^SSL info: SSLv3 read server key exchange A/;
+ next if /SSL verify error: depth=0 error=certificate not trusted/;
+ s/SSL3_READ_BYTES/ssl3_read_bytes/;
+
+ # gnutls version variances
+ next if /^Error in the pull function./;
}
# ======== stderr ========
# IP address lookups use gethostbyname() when IPv6 is not supported,
# and gethostbyname2() or getipnodebyname() when it is.
- s/\bgethostbyname2?|\bgetipnodebyname/get[host|ipnode]byname[2]/;
+ s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
# drop gnutls version strings
next if /GnuTLS compile-time version: \d+[\.\d]+$/;
# are unset, because tls ain't always there.
next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
- \sno\s\(option\sunset\)/x;
+ \sno\s\((option\sunset|end\sof\slist)\)/x;
# Skip auxiliary group lists because they will vary.
while (<IN>) { last if !/^\s/; }
}
+ # remote port numbers vary
+ s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
+
+ # Skip hosts_require_dane checks when the options
+ # are unset, because dane ain't always there.
+
+ next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+
+ # SUPPORT_PROXY
+ next if /host in hosts_proxy\?/;
+
+ # Experimental_International
+ next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
+
+ # Environment cleaning
+ next if /\w+ in keep_environment\? (yes|no)/;
+
+ # Sizes vary with test hostname
+ s/^cmd buf flush \d+ bytes$/cmd buf flush ddd bytes/;
+
+ # Spool filesystem free space changes on different systems.
+ s/^((spool|log) directory space =) \d+K (inodes =) \d+/$1 nnnnnK $3 nnnnn/;
+
# When Exim is checking the size of directories for maildir, it uses
# the check_dir_size() function to scan directories. Of course, the order
# of the files that are obtained using readdir() varies from system to
@saved = ();
}
- # Skip hosts_require_dane checks when the options
- # are unset, because dane ain't always there.
-
- next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
-
- # Experimental_International
- next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
-
# Skip some lines that Exim puts out at the start of debugging output
# because they will be different in different binaries.
'optional_ocsp' =>
{ 'stderr' => '/127.0.0.1 in hosts_requ(ire|est)_ocsp/' },
- 'no_tpt_filter_epipe' =>
- { 'stderr' => '/^writing error 32: Broken pipe$/' },
-
'optional_cert_hostnames' =>
{ 'stderr' => '/in tls_verify_cert_hostnames\? no/' },
'scanfile_size' =>
{ 'stdout' => 's/(Content-length:) \d\d\d/$1 ddd/' },
+ 'delay_1500' =>
+ { 'stderr' => 's/(1[5-9]|23\d)\d\d msec/ssss msec/' },
+
+ 'tls_anycipher' =>
+ { 'mainlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /' },
+
+ 'debug_pid' =>
+ { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d{1,5}/ppppp/g' },
+
+ 'optional_dsn_info' =>
+ { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
+ },
+
+ 'optional_config' =>
+ { 'stdout' => '/^(
+ dkim_(canon|domain|private_key|selector|sign_headers|strict)
+ |gnutls_require_(kx|mac|protocols)
+ |hosts_(requ(est|ire)|try)_(dane|ocsp)
+ |hosts_(avoid|nopass|require|verify_avoid)_tls
+ |socks_proxy
+ |tls_[^ ]*
+ )($|[ ]=)/x' },
+
+ 'sys_bindir' =>
+ { 'mainlog' => 's%/(usr/)?bin/%SYSBINDIR/%' },
+
+ 'sync_check_data' =>
+ { 'mainlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/',
+ 'rejectlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1<suppressed>/'},
+
+ 'debuglog_stdout' =>
+ { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //;
+ s/Process \d+ is ready for new message/Process pppp is ready for new message/'
+ },
};
my($aux_info) = $_[4];
my($yield) = 1;
+our %ENV = map { $_ => $ENV{$_} } grep { /^(?:USER|SHELL|PATH|TERM|EXIM_TEST_.*)$/ } keys %ENV;
+
if (/^(\d+)\s*$/) # Handle unusual return code
{
my($r) = $_[2];
# Various Unix management commands are recognized
if (/^(ln|ls|du|mkdir|mkfifo|touch|cp|cat)\s/ ||
- /^sudo (rmdir|rm|chown|chmod)\s/)
+ /^sudo\s(rmdir|rm|mv|chown|chmod)\s/)
{
run_system("$_ >>test-stdout 2>>test-stderr");
return 1;
# command, triggered by $server_pid being non-zero. The server sends its output
# to a different file. The variable $server_opts, if not empty, contains
# options to disable IPv4 or IPv6 if necessary.
+# This works because "server" swallows its stdin before waiting for a connection.
if (/^server\s+(.*)$/)
{
# not drop privilege when -C and -D options are present. To run the exim
# command as root, we use sudo.
-elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
+elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+)?\s+(.*)$/)
{
- $args = $5;
+ $args = $6;
my($envset) = (defined $1)? $1 : "";
- my($sudo) = (defined $3)? "sudo " : "";
- my($special)= (defined $4)? $4 : "";
+ my($sudo) = (defined $3)? "sudo " . (defined $4 ? "-u $4 ":"") : "";
+ my($special)= (defined $5)? $5 : "";
$wait_time = (defined $2)? $2 : 0;
# Return 2 rather than 1 afterwards
$args =~ s/(?:^|\s)-d\S*// if $optargs =~ /(?:^|\s)-d/;
- $cmd = "$envset$sudo$parm_cwd/eximdir/exim$special$optargs " .
+ my $opt_valgrind = $valgrind ? "valgrind --leak-check=yes --suppressions=$parm_cwd/aux-fixed/valgrind.supp " : "";
+
+ $cmd = "$envset$sudo$opt_valgrind" .
+ "$parm_cwd/eximdir/exim$special$optargs " .
"-DEXIM_PATH=$parm_cwd/eximdir/exim$special " .
"-C $parm_cwd/test-config $args " .
">>test-stdout 2>>test-stderr";
-
# If the command is starting an Exim daemon, we run it in the same
# way as the "server" command above, that is, we don't want to wait
# for the process to finish. That happens when "killdaemon" is obeyed later
}
}
+# The "background" command is run but not waited-for, like exim -DSERVER=server.
+# One script line is read and fork-exec'd. The PID is stored for a later
+# killdaemon.
+
+elsif (/^background$/)
+ {
+ my $line;
+# $pidfile = "$parm_cwd/aux-var/server-daemon.pid";
+
+ $_ = <SCRIPT>; $lineno++;
+ chomp;
+ $line = $_;
+ if ($debug) { printf ">> daemon: $line >>test-stdout 2>>test-stderr\n"; }
+
+ my $pid = fork();
+ if (not defined $pid) { die "** fork failed: $!\n" }
+ if (not $pid) {
+ print "[$$]>> ${line}\n" if ($debug);
+ close(STDIN);
+ open(STDIN, "<", "test-stdout");
+ close(STDOUT);
+ open(STDOUT, ">>", "test-stdout");
+ close(STDERR);
+ open(STDERR, ">>", "test-stderr-server");
+ exec "exec ${line}";
+ exit(1);
+ }
+
+# open(my $fh, ">", $pidfile) ||
+# tests_exit(-1, "Failed to open $pidfile: $!");
+# printf($fh, "%d\n", $pid);
+# close($fh);
+
+ while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
+ select(undef, undef, undef, 0.3); # Let the daemon get going
+ return (3, { exim_pid => $pid }); # Don't wait
+ }
+
+
# Unknown command
if ($arg eq "-NOIPV4") { $have_ipv4 = 0; next; }
if ($arg eq "-NOIPV6") { $have_ipv6 = 0; next; }
if ($arg eq "-KEEP") { $save_output = 1; next; }
+ if ($arg eq "-VALGRIND") { $valgrind = 1; next; }
if ($arg =~ /^-FLAVOU?R$/) { $flavour = shift; next; }
}
$optargs .= " $arg";
# directory. Thus, we should choose the highest version of Exim that has
# been compiled.
- if ($f eq "exim4" || $f eq "exim-snapshot")
+ if ($f eq "exim4" || $f eq "exim-snapshot" || $f eq 'src')
{ $srcdir = $f; }
else
{ $srcdir = $f
# deal with TRUSTED_CONFIG_LIST restrictions
unlink("$parm_cwd/test-config") if -e "$parm_cwd/test-config";
-symlink("$parm_cwd/confs/0000", "$parm_cwd/test-config")
- or die "Unable to link initial config into place: $!\n";
+open (IN, "$parm_cwd/confs/0000") ||
+ tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
+open (OUT, ">test-config") ||
+ tests_exit(-1, "Couldn't open test-config: $!\n");
+while (<IN>) { print OUT; }
+close(IN);
+close(OUT);
print("Probing with config file: $parm_cwd/test-config\n");
open(EXIMINFO, "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd " .
$parm_eximuser = $1 if /^exim_user = (.*)$/;
$parm_eximgroup = $1 if /^exim_group = (.*)$/;
$parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
+ print "$_" if /wrong owner/;
}
close(EXIMINFO);
die "Unable to check the TRUSTED_CONFIG_LIST, seems to be empty?\n";
}
-open(EXIMINFO, "$parm_exim -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
+open(EXIMINFO, "$parm_exim -d-all+transport -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
die "** Cannot run $parm_exim: $!\n";
print "-" x 78, "\n";
{
my(@temp);
- if (/^Exim version/) { print; }
+ if (/^(Exim|Library) version/) { print; }
elsif (/^Size of off_t: (\d+)/)
{
}
+##################################################
+# Check for redis #
+##################################################
+if (defined $parm_lookups{'redis'})
+ {
+ if (system("redis-server -v 2>/dev/null >/dev/null") == 0)
+ {
+ print "The redis-server command works\n";
+ $parm_running{'redis'} = ' ';
+ }
+ else
+ {
+ print "The redis-server command failed: assume Redis not installed\n";
+ }
+ }
+
##################################################
# Test for the basic requirements #
##################################################
$_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
{
$ip = $1;
- next if ($ip =~ /^127\./);
+ next if ($ip =~ /^127\./ || $ip =~ /^10\./);
$parm_ipv4 = $ip;
}
tests_exit(-1, "Exim user ($parm_eximuser,$parm_exim_uid) cannot be "
."the same as caller ($parm_caller,$parm_caller_uid)");
}
+if ($parm_caller_gid eq $parm_exim_gid) {
+ tests_exit(-1, "Exim group ($parm_eximgroup,$parm_exim_gid) cannot be "
+ ."the same as caller's ($parm_caller) group as it confuses "
+ ."results analysis");
+}
print "The Exim user needs access to the test suite directory. Checking ...";
my($subtest_startline) = $lineno;
- # Now run the command. The function returns 0 if exim was run and waited
- # for, 1 if any other command was run and waited for, and 2 if a command
+ # Now run the command. The function returns 0 for an inline command,
+ # 1 if a non-exim command was run and waited for, 2 if an exim
+ # command was run and waited for, and 3 if a command
# was run and not waited for (usually a daemon or server startup).
my($commandname) = "";
$_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
- print "... continue forced\n" if $force_continue;
+ if ($force_continue)
+ {
+ print "\nstderr tail:\n";
+ print "===================\n";
+ system("tail -20 test-stderr");
+ print "===================\n";
+ print "... continue forced\n";
+ }
+
last if /^[rc]$/i;
if (/^e$/i)
{
# The script has finished. Check the all the output that was generated. The
# function returns 0 if all is well, 1 if we should rerun the test (the files
+ # function returns 0 if all is well, 1 if we should rerun the test (the files
# have been updated). It does not return if the user responds Q to a prompt.
if ($retry)
git://git.exim.org / exim.git / blobdiff