Testsuite: basic Sieve operations

[exim.git] / src / src / EDITME

diff --git a/src/src/EDITME b/src/src/EDITME
index e198a9cc9a5f08052d7b97d7f9c2d75d250a96bd..ac323fe1808cd6ac209439e409d01b3c6e13d4d4 100644 (file)
--- a/src/src/EDITME
+++ b/src/src/EDITME
@@ -1,6 +1,8 @@
 ##################################################
 #          The Exim mail transport agent         #
 ##################################################
 ##################################################
 #          The Exim mail transport agent         #
 ##################################################

+# Copyright (c) The Exim Maintainers 2022
+# SPDX-License-Identifier: GPL-2.0-or-later

 
 # This is the template for Exim's main build-time configuration file. It
 # contains settings that are independent of any operating system. These are
 
 # This is the template for Exim's main build-time configuration file. It
 # contains settings that are independent of any operating system. These are


@@ -13,12 +15,11 @@
 
 # Things that depend on the operating system have default settings in
 # OS/Makefile-Default, but these are overridden for some OS by files
 
 # Things that depend on the operating system have default settings in
 # OS/Makefile-Default, but these are overridden for some OS by files

-# called called OS/Makefile-<osname>. You can further override these by
-# creating files called Local/Makefile-<osname>, and
-# Local/Makefile-<buildname> (where "<osname>" stands for the name of
-# your operating system - look at the names in the OS directory to see
-# which names are recognized, and "<buildname>" is derived from the
-# environment variable "build")
+# called OS/Makefile-<osname>. You can further override these settings by
+# creating files Local/Makefile-<osname>, and Local/Makefile-<build>.
+# The suffix "<osname>" stands for the name of your operating system - look
+# at the names in the OS directory to see which names are recognized,
+# and "<build>" is the content of the environment variable "build".

 
 # However, if you are building Exim for a single OS only, you don't need to
 # worry about setting up Local/Makefile-<osname>. Any build-time configuration
 
 # However, if you are building Exim for a single OS only, you don't need to
 # worry about setting up Local/Makefile-<osname>. Any build-time configuration


@@ -199,7 +200,7 @@ SPOOL_DIRECTORY=/var/spool/exim
 # the libraries and headers are installed, as the pkg-config .pc
 # specification should include all -L/-I information necessary.
 # Enabling the USE_*_PC options should be sufficient. If not using
 # the libraries and headers are installed, as the pkg-config .pc
 # specification should include all -L/-I information necessary.
 # Enabling the USE_*_PC options should be sufficient. If not using

-# pkg-config, then you have to specify the libraries, and you mmight
+# pkg-config, then you have to specify the libraries, and you might

 # need to specify the locations too.
 
 # Uncomment the following lines if you want
 # need to specify the locations too.
 
 # Uncomment the following lines if you want


@@ -208,7 +209,7 @@ SPOOL_DIRECTORY=/var/spool/exim
 # Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS
 # below.
 
 # Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS
 # below.
 

-# If you are buliding with TLS, the library configuration must be done:
+# If you are building with TLS, the library configuration must be done:

 
 # Uncomment this if you are using OpenSSL
 # USE_OPENSSL=yes
 
 # Uncomment this if you are using OpenSSL
 # USE_OPENSSL=yes


@@ -400,7 +401,7 @@ TRANSPORT_SMTP=yes
 # For Redis you need to have hiredis installed on your system
 # (https://github.com/redis/hiredis).
 # Depending on where it is installed you may have to edit the CFLAGS
 # For Redis you need to have hiredis installed on your system
 # (https://github.com/redis/hiredis).
 # Depending on where it is installed you may have to edit the CFLAGS

-# (often += -I/usr/local/include) and LDFLAGS (-lhiredis) lines.
+# (often += -I/usr/local/include) and LOOKUP_LIBS (-lhiredis) lines.

 
 # If your system has pkg-config then the _INCLUDE/_LIBS setting can be
 # handled for you automatically by also defining the _PC variable to reference
 
 # If your system has pkg-config then the _INCLUDE/_LIBS setting can be
 # handled for you automatically by also defining the _PC variable to reference


@@ -415,6 +416,8 @@ LOOKUP_DNSDB=yes
 # LOOKUP_IBASE=yes
 # LOOKUP_JSON=yes
 # LOOKUP_LDAP=yes
 # LOOKUP_IBASE=yes
 # LOOKUP_JSON=yes
 # LOOKUP_LDAP=yes

+# LOOKUP_LMDB=yes
+

 # LOOKUP_MYSQL=yes
 # LOOKUP_MYSQL_PC=mariadb
 # LOOKUP_NIS=yes
 # LOOKUP_MYSQL=yes
 # LOOKUP_MYSQL_PC=mariadb
 # LOOKUP_NIS=yes


@@ -456,27 +459,27 @@ LOOKUP_DNSDB=yes
 
 
 #------------------------------------------------------------------------------
 
 
 #------------------------------------------------------------------------------

-# The PCRE library is required for Exim.  There is no longer an embedded
+# The PCRE2 library is required for Exim.  There is no longer an embedded

 # version of the PCRE library included with the source code, instead you
 # version of the PCRE library included with the source code, instead you

-# must use a system library or build your own copy of PCRE.
+# must use a system library or build your own copy of PCRE2.

 # In either case you must specify the library link info here.  If the
 # In either case you must specify the library link info here.  If the

-# PCRE header files are not in the standard search path you must also
+# PCRE2 header files are not in the standard search path you must also

 # modify the INCLUDE path (above)
 #
 # Use PCRE_CONFIG to query the pcre-config command (first found in $PATH)
 # to find the include files and libraries, else use PCRE_LIBS and set INCLUDE
 # too if needed.
 
 # modify the INCLUDE path (above)
 #
 # Use PCRE_CONFIG to query the pcre-config command (first found in $PATH)
 # to find the include files and libraries, else use PCRE_LIBS and set INCLUDE
 # too if needed.
 

-PCRE_CONFIG=yes
-# PCRE_LIBS=-lpcre
+PCRE2_CONFIG=yes
+# PCRE_LIBS=-lpcre2

 
 
 #------------------------------------------------------------------------------
 
 
 #------------------------------------------------------------------------------

-# Comment out the following line to remove DANE support
-# Note: Enabling this unconditionally overrides DISABLE_DNSSEC
-# forces you to have SUPPORT_TLS enabled (the default).  For DANE under
-# GnuTLS we need an additional library.  See TLS_LIBS or USE_GNUTLS_PC
-# below.
+# Comment out the following line to remove DANE support.
+# Note: DANE support requires DNSSEC support (the default) and
+# SUPPORT_TLS (the default).  For DANE under GnuTLS we need an additional
+# library.  See TLS_LIBS or USE_GNUTLS_PC below.
+

 SUPPORT_DANE=yes
 
 #------------------------------------------------------------------------------
 SUPPORT_DANE=yes
 
 #------------------------------------------------------------------------------


@@ -491,7 +494,15 @@ SUPPORT_DANE=yes
 # You do not need to use this for any lookup information added via pkg-config.
 
 # LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include
 # You do not need to use this for any lookup information added via pkg-config.
 
 # LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include

-# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3
+# LOOKUP_INCLUDE +=-I /usr/local/include
+# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3 -llmdb
+
+#------------------------------------------------------------------------------
+# If you included LOOKUP_LMDB above you will need the library. Depending
+# on where installed you may also need an include directory
+#
+# LOOKUP_INCLUDE += -I/usr/local/include
+# LOOKUP_LIBS += -llmdb

 
 
 #------------------------------------------------------------------------------
 
 
 #------------------------------------------------------------------------------


@@ -559,7 +570,7 @@ DISABLE_MAL_MKS=yes
 # By default, Exim has support for checking the AD bit in a DNS response, to
 # determine if DNSSEC validation was successful.  If your system libraries
 # do not support that bit, then set DISABLE_DNSSEC to "yes"
 # By default, Exim has support for checking the AD bit in a DNS response, to
 # determine if DNSSEC validation was successful.  If your system libraries
 # do not support that bit, then set DISABLE_DNSSEC to "yes"

-# Note: Enabling SUPPORT_DANE unconditionally overrides this setting.
+# Note: DNSSEC is required for DANE support.

 
 # DISABLE_DNSSEC=yes
 
 
 # DISABLE_DNSSEC=yes
 


@@ -567,16 +578,16 @@ DISABLE_MAL_MKS=yes
 # DISABLE_EVENT=yes
 
 
 # DISABLE_EVENT=yes
 
 

-# Uncomment this line to include support for early pipelining, per
+# Uncomment this line to remove support for early pipelining, per

 # https://datatracker.ietf.org/doc/draft-harris-early-pipe/
 # https://datatracker.ietf.org/doc/draft-harris-early-pipe/

-# SUPPORT_PIPE_CONNECT=yes
+# DISABLE_PIPE_CONNECT=yes

 
 
 # Uncomment the following to remove the fast-ramp two-phase-queue-run support
 # DISABLE_QUEUE_RAMP=yes
 
 # Uncomment the following lines to add SRS (Sender Rewriting Scheme) support
 
 
 # Uncomment the following to remove the fast-ramp two-phase-queue-run support
 # DISABLE_QUEUE_RAMP=yes
 
 # Uncomment the following lines to add SRS (Sender Rewriting Scheme) support

-# using only native facilities.  See EXPERIMENTAL_SRS_ALT for an alternative.
+# using only native facilities.

 # SUPPORT_SRS=yes
 
 
 # SUPPORT_SRS=yes
 
 


@@ -587,20 +598,10 @@ DISABLE_MAL_MKS=yes
 
 # Uncomment the following line to add support for talking to dccifd.  This
 # defaults the socket path to /usr/local/dcc/var/dccifd.
 
 # Uncomment the following line to add support for talking to dccifd.  This
 # defaults the socket path to /usr/local/dcc/var/dccifd.

-# Doing so will also explicitly turn on the WITH_CONTENT_SCAN option.
+# This support also requires WITH_CONTENT_SCAN enabled.

 
 # EXPERIMENTAL_DCC=yes
 
 
 # EXPERIMENTAL_DCC=yes
 

-# Uncomment the following lines to add SRS (Sender rewriting scheme) support
-# using the implementation in linbsrs_alt.
-# You need to have libsrs_alt installed on your system (srs.mirtol.com).
-# Depending on where it is installed you may have to edit the CFLAGS and
-# LDFLAGS lines.
-
-# EXPERIMENTAL_SRS_ALT=yes
-# CFLAGS  += -I/usr/local/include
-# LDFLAGS += -lsrs_alt
-

 # Uncomment the following line to add DMARC checking capability, implemented
 # using libopendmarc libraries. You must have SPF and DKIM support enabled also.
 # SUPPORT_DMARC=yes
 # Uncomment the following line to add DMARC checking capability, implemented
 # using libopendmarc libraries. You must have SPF and DKIM support enabled also.
 # SUPPORT_DMARC=yes


@@ -609,6 +610,11 @@ DISABLE_MAL_MKS=yes
 # Uncomment the following if you need to change the default. You can
 # override it at runtime (main config option dmarc_tld_file)
 # DMARC_TLD_FILE=/etc/exim/opendmarc.tlds
 # Uncomment the following if you need to change the default. You can
 # override it at runtime (main config option dmarc_tld_file)
 # DMARC_TLD_FILE=/etc/exim/opendmarc.tlds

+#
+# Library version libopendmarc-1.4.1-1.fc33.x86_64  (on Fedora 33) is known broken;
+# 1.3.2-3 works.  It seems that the OpenDMARC project broke their API.
+# Use this option if you need to build with an old library (1.3.x)
+# DMARC_API=100300

 
 # Uncomment the following line to add ARC (Authenticated Received Chain)
 # support.  You must have SPF and DKIM support enabled also.
 
 # Uncomment the following line to add ARC (Authenticated Received Chain)
 # support.  You must have SPF and DKIM support enabled also.


@@ -626,15 +632,11 @@ DISABLE_MAL_MKS=yes
 # Uncomment the following to include extra information in fail DSN message (bounces)
 # EXPERIMENTAL_DSN_INFO=yes
 
 # Uncomment the following to include extra information in fail DSN message (bounces)
 # EXPERIMENTAL_DSN_INFO=yes
 

-# Uncomment the following to add LMDB lookup support
-# You need to have LMDB installed on your system (https://github.com/LMDB/lmdb)
-# Depending on where it is installed you may have to edit the CFLAGS and LDFLAGS lines.
-# EXPERIMENTAL_LMDB=yes
-# CFLAGS += -I/usr/local/include
-# LDFLAGS += -llmdb
-

 # Uncomment the following line to add queuefile transport support
 # EXPERIMENTAL_QUEUEFILE=yes
 # Uncomment the following line to add queuefile transport support
 # EXPERIMENTAL_QUEUEFILE=yes

+#
+# Uncomment the following line to add XCLIENT support
+# EXPERIMENTAL_XCLIENT=yes

 
 ###############################################################################
 #                 THESE ARE THINGS YOU MIGHT WANT TO SPECIFY                  #
 
 ###############################################################################
 #                 THESE ARE THINGS YOU MIGHT WANT TO SPECIFY                  #


@@ -648,6 +650,29 @@ DISABLE_MAL_MKS=yes
 # understand these issues, go with the defaults, which are used by many sites.
 
 
 # understand these issues, go with the defaults, which are used by many sites.
 
 

+#------------------------------------------------------------------------------
+# Which DBM library to use.  If you do not specify a specific here, you get
+# the platform default.  Uncomment the pair of lines as preferred.
+# Note: when changing an installation from one DB type to another all the
+# hints-DB files, in spool/db, should be removed.
+
+# gdbm in native mode
+# USE_GDBM = yes
+# DBMLIB = -lgdbm
+
+# gdbm in Berkeley-DB compatibility mode
+# USE_NDBM = yes
+# DBMLIB = -lgdbm -lgdbm_compat
+
+# tdb
+# USE_TDB = yes
+# DBMLIB = -ltdb
+
+# Berkeley DB
+# USE_DB = yes
+# DBMLIB = -ldb
+
+

 #------------------------------------------------------------------------------
 # Although Exim is normally a setuid program, owned by root, it refuses to run
 # local deliveries as root by default. There is a runtime option called
 #------------------------------------------------------------------------------
 # Although Exim is normally a setuid program, owned by root, it refuses to run
 # local deliveries as root by default. There is a runtime option called


@@ -1495,4 +1520,9 @@ EXIM_TMPDIR="/tmp"
 # For development, add this to include code to time various stages and report.
 # CFLAGS += -DMEASURE_TIMING
 
 # For development, add this to include code to time various stages and report.
 # CFLAGS += -DMEASURE_TIMING
 

+# For a very slightly smaller build, for constrained systems, uncomment this.
+# The feature involved is purely for debugging.
+
+# DISABLE_CLIENT_CMD_LOG=yes
+

 # End of EDITME for Exim 4.
 # End of EDITME for Exim 4.