static int
open_msglog_file(uschar *filename, int mode, uschar **error)
{
+if (Ustrstr(filename, US"/../"))
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "Attempt to open msglog file path with upward-traversal: '%s'\n", filename);
+
for (int i = 2; i > 0; i--)
{
int fd = Uopen(filename,
-void
-timesince(struct timeval * diff, struct timeval * then)
-{
-gettimeofday(diff, NULL);
-diff->tv_sec -= then->tv_sec;
-if ((diff->tv_usec -= then->tv_usec) < 0)
- {
- diff->tv_sec--;
- diff->tv_usec += 1000*1000;
- }
-}
-
-
-
-uschar *
-string_timediff(struct timeval * diff)
-{
-static uschar buf[sizeof("0.000s")];
-
-if (diff->tv_sec >= 5 || !LOGGING(millisec))
- return readconf_printtime((int)diff->tv_sec);
-
-sprintf(CS buf, "%u.%03us", (uint)diff->tv_sec, (uint)diff->tv_usec/1000);
-return buf;
-}
-
-
-uschar *
-string_timesince(struct timeval * then)
-{
-struct timeval diff;
-
-timesince(&diff, then);
-return string_timediff(&diff);
-}
-
/******************************************************************************/
tls_out.peercert = addr->peercert;
addr->peercert = NULL;
+ tls_out.ver = addr->tlsver;
tls_out.cipher = addr->cipher;
tls_out.peerdn = addr->peerdn;
tls_out.ocsp = addr->ocsp;
#ifndef DISABLE_TLS
tls_free_cert(&tls_out.ourcert);
tls_free_cert(&tls_out.peercert);
+ tls_out.ver = NULL;
tls_out.cipher = NULL;
tls_out.peerdn = NULL;
tls_out.ocsp = OCSP_NOT_REQ;
/* In the test harness, wait just a bit to let the subprocess finish off
any debug output etc first. */
- if (f.running_in_test_harness) millisleep(300);
+ testharness_pause_ms(300);
DEBUG(D_deliver) debug_printf("journalling %s", big_buffer);
len = Ustrlen(big_buffer);
switch (*subid)
{
case '1':
- addr->cipher = NULL;
- addr->peerdn = NULL;
+ addr->tlsver = addr->cipher = addr->peerdn = NULL;
if (*ptr)
+ {
addr->cipher = string_copy(ptr);
+ addr->tlsver = string_copyn(ptr, Ustrchr(ptr, ':') - ptr);
+ }
while (*ptr++);
if (*ptr)
addr->peerdn = string_copy(ptr);
/* Otherwise, if we are running in the test harness, wait a bit, to let the
newly created process get going before we create another process. This should
- ensure repeatability in the tests. We only need to wait a tad. */
+ ensure repeatability in the tests. Wait long enough for most cases to complete
+ the transport. */
- else if (f.running_in_test_harness) millisleep(500);
+ else testharness_pause_ms(600);
continue;
}
+
+/* When running in the test harness, there's an option that allows us to
+fudge this time so as to get repeatability of the tests. Take the first
+time off the list. In queue runs, the list pointer gets updated in the
+calling process. */
+
+int
+test_harness_fudged_queue_time(int actual_time)
+{
+int qt;
+if ( f.running_in_test_harness && *fudged_queue_times
+ && (qt = readconf_readtime(fudged_queue_times, '/', FALSE)) >= 0)
+ {
+ DEBUG(D_deliver) debug_printf("fudged queue_times = %s\n",
+ fudged_queue_times);
+ return qt;
+ }
+return actual_time;
+}
+
/*************************************************
* Deliver one message *
*************************************************/
open_db dbblock;
open_db *dbm_file;
extern int acl_where;
+uschar *info;
-uschar *info = queue_run_pid == (pid_t)0
+#ifdef MEASURE_TIMING
+report_time_since(×tamp_startup, US"delivery start"); /* testcase 0022, 2100 */
+#endif
+
+info = queue_run_pid == (pid_t)0
? string_sprintf("delivering %s", id)
: string_sprintf("delivering %s (queue run pid %d)", id, queue_run_pid);
new->onetime_parent = recipients_list[r->pno].address;
/* If DSN support is enabled, set the dsn flags and the original receipt
- to be passed on to other DSN enabled MTAs */
+ to be passed on to other DSN enabled MTAs */
+
new->dsn_flags = r->dsn_flags & rf_dsnflags;
new->dsn_orcpt = r->orcpt;
DEBUG(D_deliver) debug_printf("DSN: set orcpt: %s flags: 0x%x\n",
);
/* send report if next hop not DSN aware or a router flagged "last DSN hop"
- and a report was requested */
- if ( ( a->dsn_aware != dsn_support_yes
- || a->dsn_flags & rf_dsnlasthop
- )
+ and a report was requested */
+
+ if ( (a->dsn_aware != dsn_support_yes || a->dsn_flags & rf_dsnlasthop)
&& a->dsn_flags & rf_notify_success
)
{
if (pid < 0) /* Creation of child failed */
{
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Process %d (parent %d) failed to "
- "create child process to send failure message: %s", getpid(),
+ "create child process to send success-dsn message: %s", getpid(),
getppid(), strerror(errno));
DEBUG(D_deliver) debug_printf("DSN: child_open_exim failed\n");
transport_ctx tctx = {{0}};
DEBUG(D_deliver)
- debug_printf("sending error message to: %s\n", sender_address);
+ debug_printf("sending success-dsn to: %s\n", sender_address);
/* build unique id for MIME boundary */
bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
moan_write_from(f);
fprintf(f, "Auto-Submitted: auto-generated\n"
"To: %s\n"
- "Subject: Delivery Status Notification\n"
- "Content-Type: multipart/report; report-type=delivery-status; boundary=%s\n"
+ "Subject: Delivery Status Notification\n",
+ sender_address);
+ moan_write_references(f, NULL);
+ fprintf(f, "Content-Type: multipart/report;"
+ " report-type=delivery-status; boundary=%s\n"
"MIME-Version: 1.0\n\n"
"--%s\n"
"This message was created automatically by mail delivery software.\n"
" ----- The following addresses had successful delivery notifications -----\n",
- sender_address, bound, bound);
+ bound, bound);
for (address_item * a = addr_senddsn; a; a = a->next)
fprintf(f, "<%s> (relayed %s)\n\n",
fprintf(fp, "Auto-Submitted: auto-replied\n");
moan_write_from(fp);
fprintf(fp, "To: %s\n", bounce_recipient);
+ moan_write_references(fp, NULL);
/* generate boundary string and output MIME-Headers */
bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
/* In the test harness, let the child do it's thing first. */
- if (f.running_in_test_harness) millisleep(500);
+ testharness_pause_ms(500);
/* If the process failed, there was some disaster in setting up the
error message. Unless the message is very old, ensure that addr_defer
int show_time;
int queue_time = time(NULL) - received_time.tv_sec;
- /* When running in the test harness, there's an option that allows us to
- fudge this time so as to get repeatability of the tests. Take the first
- time off the list. In queue runs, the list pointer gets updated in the
- calling process. */
-
- if (f.running_in_test_harness && fudged_queue_times[0] != 0)
- {
- int qt = readconf_readtime(fudged_queue_times, '/', FALSE);
- if (qt >= 0)
- {
- DEBUG(D_deliver) debug_printf("fudged queue_times = %s\n",
- fudged_queue_times);
- queue_time = qt;
- }
- }
+ queue_time = test_harness_fudged_queue_time(queue_time);
/* See how many warnings we should have sent by now */
DEBUG(D_deliver)
{
- debug_printf("time on queue = %s id %s addr %s\n", readconf_printtime(queue_time), message_id, addr_defer->address);
+ debug_printf("time on queue = %s id %s addr %s\n",
+ readconf_printtime(queue_time), message_id, addr_defer->address);
debug_printf("warning counts: required %d done %d\n", count,
warning_count);
}
fprintf(f, "Auto-Submitted: auto-replied\n");
moan_write_from(f);
fprintf(f, "To: %s\n", recipients);
+ moan_write_references(f, NULL);
/* generated boundary string and output MIME-Headers */
bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
(void)close(deliver_datafile);
deliver_datafile = -1;
DEBUG(D_deliver) debug_printf("end delivery of %s\n", id);
+#ifdef MEASURE_TIMING
+report_time_since(×tamp_startup, US"delivery end"); /* testcase 0005 */
+#endif
/* It is unlikely that there will be any cached resources, since they are
released after routing, and in the delivery subprocesses. However, it's
else if (pid == 0) /* child: fork again to totally disconnect */
{
- if (f.running_in_test_harness) millisleep(100); /* let parent debug out */
+ testharness_pause_ms(100); /* let parent debug out */
/* does not return */
smtp_proxy_tls(cutthrough.cctx.tls_ctx, big_buffer, big_buffer_size,
pfd, 5*60);