4 This file contains an almost complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.95.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_auth string* unset main 4.00
55 acl_smtp_connect string* unset main 4.11
56 acl_smtp_data string* unset main 4.00
57 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr, 4.83 unless disable_prdr
58 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_insecure_tainted_data boolean true main 4.95 support will drop ~4.97ٍ
82 allow_localhost boolean false smtp 1.73
83 allow_mx_to_ip boolean false main 3.14
84 allow_symlink boolean false appendfile
85 allow_utf8_domains boolean false main 4.14
86 arc_sign string* unset smtp 4.91 with Experimental_ARC
87 auth_advertise_hosts host list "*" main 4.00
88 authenticated_sender string* unset smtp 4.14
89 authenticated_sender_force boolean false smtp 4.61
90 authenticate_hosts host list unset smtp 3.13
91 auto_thaw time 0s main
92 av_scanner string* + main 4.50 with content scan
93 batch_id string unset appendfile 4.00
96 batch_max integer 100 appendfile
99 bcc string* unset autoreply
100 bi_command string unset main
101 body_only boolean false transports 2.05
102 bounce_message_file string* unset main 4.00 expanded from 4.94
103 bounce_message_text string unset main 4.00
104 bounce_return_body boolean true main 4.23
105 bounce_return_message boolean true main 4.00
106 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
107 bounce_sender_authentication string unset main 4.00
108 callout_domain_negative_expire time 3h main 4.11
109 callout_domain_positive_expire time 7d main 4.11
110 callout_negative_expire time 2h main 4.11
111 callout_positive_expire time 24h main 4.11
112 callout_random_local_part string* + main 4.11
113 cannot_route_message string* unset routers 4.11
114 caseful_local_part boolean false routers 4.00
115 cc string* unset autoreply
116 check_ancestor boolean false redirect 4.00
117 check_group boolean false appendfile
119 check_local_user boolean false routers 4.00
120 check_log_inodes integer 0 main
121 check_log_space integer 0 main
122 check_owner boolean true appendfile 3.14
124 check_rfc2047_length boolean true main 4.60
125 check_secondary_mx boolean false dnslookup 4.00
126 check_spool_inodes integer 0 main
127 check_spool_space integer 0 main
128 check_string string "From " appendfile 3.03
130 check_srv string* unset dnslookup 4.31
131 client_authz string* unset gsasl 4.94
132 client_condition string* unset authenticators 4.68
133 client_ignore_invalid_base64 boolean false plaintext 4.61
134 client_name string* + cram_md5 3.10
135 client_password string* unset gsasl 4.94
136 client_secret string* unset cram_md5 3.10
137 client_send string* unset plaintext 3.10
138 unset external (auth) 4.93
139 client_username string* unset gsasl 4.94
140 command string* unset lmtp 3.20
142 unset queryprogram 4.00
143 command_group string unset queryprogram 4.00
144 command_timeout time 5m smtp
145 command_user string unset queryprogram 4.00
146 commandline_checks_require_admin boolean false main 4.90
147 condition string* unset routers 4.00
148 connect_timeout time 0s smtp 1.60
149 connection_max_messages integer 500 smtp 4.00 replaces batch_max
150 create_directory boolean true appendfile
151 create_file string "anywhere" appendfile
152 current_directory string unset transports 4.00
153 unset queryprogram 4.00
154 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
155 daemon_startup_retries int 9 main 4.52
156 daemon_startup_sleep time 30s main 4.52
157 dane_require_tls_ciphers string* unset smtp 4.91
158 data string unset redirect 4.00
159 data_timeout time 5m smtp
160 debug_print string* unset authenticators 4.00
162 unset transports 2.00
163 debug_store boolean false main 4.90
164 delay_after_cutoff boolean true smtp
165 delay_warning time list 24h main
166 delay_warning_condition string* + main 1.73
167 deliver_drop_privilege boolean false main 4.00
168 deliver_queue_load_max fixed-point unset main 1.70
169 delivery_date_add boolean false transports
170 delivery_date_remove boolean true main
171 dkim_canon string* unset smtp 4.70
172 dkim_domain string list* unset smtp 4.72
173 dkim_private_key string* unset smtp 4.70
174 dkim_selector string* unset smtp 4.70
175 dkim_sign_headers string* (RFC4871) smtp 4.70
176 dkim_strict string* unset smtp 4.70
177 dkim_timestamps integer* unset smtp 4.92
178 dkim_verify_hashes string sha256:sha512:sha1 main 4.93
179 dkim_verify_keytypes string ed25519:rsa main 4.93
180 dkim_verify_min_keysizes string list "rsa=1024 ed25519=250" main 4.94
181 dkim_verify_minimal boolean false main 4.93
182 dkim_verify_signers string* $dkim_signers main 4.70
183 directory string* unset appendfile
184 directory_file string* + appendfile
185 directory_mode octal-integer 0700 appendfile
186 directory_transport string* unset redirect 4.00
187 disable_ipv6 boolean false main 4.61
188 disable_logging boolean false routers 4.11
189 false transports 4.11
190 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc, 4.93 mainline
191 dmarc_history_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
192 dmarc_tld_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
193 dns_again_means_nonexist domain list unset main 1.89
194 dns_check_names_pattern string + main 2.11
195 dns_cname_loops integer 0 main 4.92 Set to 9 for older behaviour
196 dns_csa_search_limit integer 5 main 4.60
197 dns_csa_use_reverse boolean true main 4.60
198 dns_dnssec_ok integer -1 main 4.82
199 dns_dane_ok integer -1 main 4.83
200 dns_ipv4_lookup boolean false main 3.20
201 dns_qualify_single boolean true smtp
202 dns_retrans time 0s main 1.60
203 dns_retry integer 0 main 1.60
204 dns_search_parents boolean false smtp
205 dns_use_edns0 integer -1 main 4.76
206 domains domain list unset routers 4.00
207 driver string unset authenticators
210 drop_cr boolean false main 4.00 became a no-op in 4.21
211 dscp string unset smtp 4.82
212 dsn_from string* + main 4.67
213 envelope_to_add boolean false transports
214 envelope_to_remove boolean true main
215 environment string* unset pipe 2.95
216 errors_copy string list* unset main
217 errors_reply_to string unset main
218 errors_to string* unset routers 4.00
219 escape_string string ">From " appendfile 3.03
221 exim_group string ++ main
222 exim_path string ++ main
223 exim_user string ++ main
224 exim_version string ++ main 4.93
225 expn boolean true routers
226 extra_local_interfaces string unset main 4.21
227 extract_addresses_remove_arguments boolean true main 1.92
228 fail_verify boolean false routers
229 fail_verify_recipient boolean false routers 4.00
230 fail_verify_sender boolean false routers 4.00
231 fallback_hosts string list unset routers 4.00
233 file string* unset appendfile
236 file_expand boolean false autoreply
237 file_format string unset appendfile 3.03
238 file_must_exist boolean false appendfile
239 file_optional boolean false autoreply
240 file_transport string* unset redirect 4.00
241 filter_prepend_home boolean true redirect 4.63
242 final_timeout time 10m smtp
243 finduser_retries integer 0 main
244 forbid_blackhole boolean false redirect 4.00
245 forbid_exim_filter boolean false redirect 4.44
246 forbid_fail boolean false redirect 4.00
247 forbid_file boolean false redirect 4.00
248 forbid_filter_existstest boolean false redirect 4.00
249 forbid_filter_logwrite boolean false redirect 4.00
250 forbid_filter_lookup boolean false redirect 4.00
251 forbid_filter_perl boolean false redirect 4.00
252 forbid_filter_readfile boolean false redirect 4.00
253 forbid_filter_readsocket boolean false redirect 4.11
254 forbid_filter_reply boolean false redirect 4.00
255 forbid_filter_run boolean false redirect 4.00
256 forbid_include boolean false redirect 4.00
257 forbid_pipe boolean false redirect 4.00
258 forbid_sieve_filter boolean false redirect 4.44
259 forbid_smtp_code boolean false redirect 4.63
260 force_command boolean false pipe 4.82
261 freeze_exec_fail boolean false pipe 1.89
262 freeze_signal boolean false pipe 4.75
263 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
264 from string* unset autoreply
265 gecos_name string* unset main
266 gecos_pattern string unset main
267 gethostbyname boolean false smtp
268 gnutls_allow_auto_pkcs11 boolean false main 4.82
269 gnutls_compat_mode boolean unset main 4.70
270 gnutls_require_kx string* unset main 4.67 deprecated, warns
271 string* unset smtp 4.67 deprecated, warns
272 gnutls_require_mac string* unset main 4.67 deprecated, warns
273 string* unset smtp 4.67 deprecated, warns
274 gnutls_require_protocols string* unset main 4.67 deprecated, warns
275 string* unset smtp 4.67 deprecated, warns
276 group string + routers 4.00
277 unset transports 4.00 replaces local option in some transports
278 header_line_maxsize integer 0 (unset) main 4.14
279 header_maxsize integer 1M main 4.14
280 headers string* unset autoreply
281 headers_add string* unset routers 4.00
283 headers_charset string ++ main 4.21
284 headers_only boolean false transports 2.05
285 headers_remove string* unset routers 4.00
287 headers_rewrite string unset transports 3.20
288 helo_accept_junk_hosts host list unset main 3.00
289 helo_allow_chars string "" main 4.02
290 helo_lookup_domains domain list unset main 4.00
291 helo_data string* "$primary_hostname" smtp 3.21
292 helo_try_verify_hosts host list unset main 4.00
293 helo_verify_hosts host list unset main 1.73
294 hide_child_in_errmsg false redirect 4.00
295 hold_domains domain list unset main 1.70
296 home_directory string* unset transports 4.00 replaces individual options
297 host_all_ignored string "defer" manualroute 4.67
298 host_find_failed string "freeze" manualroute 4.00
299 host_name_extract string
300 "${if and {{match{.outlook.com\\$}{$host}} {match{$item}{\\N^250-([\\w.]+)\\s\\N}}} {$1}}"
302 host_lookup host list unset main 3.00
303 host_lookup_order string list "bydns:byaddr" main 4.30
304 host_reject_connection host list unset main 4.00
305 hosts string unset iplookup 4.00
306 string list* unset smtp
307 hosts_avoid_esmtp host list unset smtp 4.21
308 hosts_avoid_pipelining host list unset smtp 4.67
309 hosts_avoid_tls host list unset smtp 3.20
310 hosts_connection_nolog host list unset main 4.43
311 hosts_max_try integer 5 smtp 3.20
312 hosts_max_try_hardlimit integer 50 smtp 4.50
313 hosts_nopass_tls host list unset smtp 4.00
314 hosts_noproxy_tls host list "*" smtp 4.90
315 hosts_override boolean false smtp 2.11
316 hosts_pipe_connect host_list unset smtp 4.93 if experimental_pipe_connect
317 hosts_randomize boolean false manualroute 4.00
319 hosts_require_auth host list unset smtp 4.00
320 hosts_require_alpn host list unset main 4.95
322 hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
323 hosts_require_helo host list "*" main 4.95
324 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
325 hosts_require_tls host list unset smtp 3.20
326 hosts_treat_as_local domain list unset main 1.95
327 hosts_try_auth host list unset smtp 4.00
328 hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
329 hosts_try_fastopen host list unset smtp 4.88
330 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
331 ibase_servers string unset main 4.23
332 ignore_bounce_errors_after time 0s main 4.00
333 ignore_eacces boolean false redirect 4.00
334 ignore_enotdir boolean false redirect 4.00
335 ignore_fromline_hosts host list unset main
336 ignore_fromline_local boolean false main 2.05
337 ignore_status boolean false pipe
338 ignore_target_hosts host list unset routers 4.00
339 include_directory string unset redirect 4.00
340 initgroups false routers 4.00
341 interface string list unset smtp 1.70
342 keep_malformed time 4d main
343 keepalive boolean true smtp 2.05
344 ldap_default_servers string list unset main 3.02
345 ldap_version int 2 or 3 main 4.14
346 limits_advertise_hosts host list * main 4.98
347 local_from_check boolean true main 3.14
348 local_from_prefix string unset main 3.14
349 local_from_suffix string unset main 3.14
350 local_interfaces string list unset main 1.60
351 local_part_prefix string unset routers 4.00 replaces prefix
352 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
353 local_part_suffix string unset routers 4.00 replaces suffix
354 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
355 local_parts string list* unset routers 4.00
356 local_scan_timeout time 5m main 4.03
357 local_sender_retain boolean false main 4.00
358 localhost_number string unset main
359 lock_fcntl_timeout time 0s appendfile 3.14
360 lock_flock_timeout time 0s appendfile 4.11
361 lock_interval time 3s appendfile
362 lock_retries integer 10 appendfile
363 lockfile_mode octal-integer 0600 appendfile
364 lockfile_timeout time 30m appendfile
365 log string* unset autoreply
366 log_as_local boolean + routers 4.00
367 log_file_path string list ++ main
368 log_defer_output boolean false pipe 1.89
369 log_fail_output boolean false pipe 1.60
370 log_output boolean false pipe 1.60
371 log_selector string unset main 4.00
372 log_timezone boolean false main 4.11
373 lookup_open_max integer 25 main 2.05
374 mailbox_filecount string* unset appendfile 4.43
375 mailbox_size string* unset appendfile 4.43
376 maildir_format boolean false appendfile 1.70
377 maildir_retries integer 10 appendfile 1.70
378 maildir_tag string* unset appendfile 1.92
379 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
380 maildirfolder_create_regex string unset appendfile 4.62
381 mailstore_format boolean false appendfile 2.00
382 mailstore_prefix string* unset appendfile 2.00
383 mailstore_suffix string* unset appendfile 2.00
384 match_directory string* unset localuser
385 max_output integer 20K pipe
386 max_rcpt integer 100 smtp 1.60
387 max_user_name_length integer 0 main
388 mbx_format boolean false appendfile 2.10
389 message_body_newlines boolean false main 4.68
390 message_body_visible integer 500 main
391 message_id_header_domain string* unset main 4.11
392 message_id_header_text string* unset main
393 message_linelength_limit integer 998 smtp 4.94
394 message_logs boolean true main 4.10
395 message_prefix string* + appendfile 4.00 replaces prefix
396 string* unset pipe 4.00 replaces prefix
397 message_size_limit integer 50M main
399 message_suffix string* + appendfile 4.00 replaces suffix
400 string* unset pipe 4.00 replaces suffix
401 mode octal-integer 0600 appendfile
403 mode_fail_narrower boolean true appendfile 1.70
404 modemask octal-integer 022 redirect 4.00
405 more boolean true routers 4.00
406 move_frozen_messages boolean false main 3.09
407 multi_domain boolean true smtp
408 mx_domains domain list unset dnslookup 4.00
409 mx_fail_domains domain list unset dnslookup 4.43
410 mysql_servers string list unset main 3.03
411 never_users string list unset main
412 notifier_socket string "$spool_directory/exim_daemon_notify"
414 notify_comsat boolean false appendfile
415 once string* unset autoreply
416 once_file_size integer 0 autoreply 3.20
417 once_repeat time 0s autoreply 2.95
418 one_time boolean false redirect 4.00
419 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
420 optional boolean false iplookup 4.00
421 oracle_servers string unset main 4.00
422 owners string list unset redirect 4.00
423 owngroups string list unset redirect 4.00
424 panic_coredump boolean false main 4.96
425 pass_on_timeout boolean false routers 4.00
426 pass_router string unset routers 4.00
427 path string "/usr/bin" pipe
428 percent_hack_domains domain list unset main
429 perl_at_start boolean false main 2.10
430 perl_startup string unset main 2.10
431 permit_coredump boolean false pipe 4.73
432 pgsql_servers string list unset main 3.14
433 pid_file_path string ++ main
434 pipe_as_creator boolean false pipe
435 pipe_transport string* unset redirect 4.00
436 pipelining_advertise_hosts host list "*" main 4.14
437 pipelining__connect_advertise_hosts host list "*" main 4.92 if experimental_pipe_connect
438 port integer 0 iplookup 4.00
440 preserve_message_logs boolean false main
441 prdr_enable boolean false main 4.82 if experimental_prdr
442 primary_hostname string + main
443 print_topbitchars boolean false main 1.89
444 process_log_path string unset main 4.21
445 prod_requires_admin boolean true main 1.70
446 protocol string "udp" iplookup 4.00
447 string "smtp" smtp 3.20
448 public_name string unset authenticators 3.10
449 qualify_domain string + main
450 string* unset redirect 4.31
451 qualify_preserve_domain boolean false redirect 4.00
452 qualify_recipient string + main
453 qualify_single boolean true dnslookup 4.00
454 query string* + iplookup 4.00
455 queue_domains domain list unset main 4.00
456 queue_fast_ramp boolean false main 4.95
457 queue_list_requires_admin boolean true main 1.95
458 queue_only boolean false main
459 queue_only_file string unset main 2.05
460 queue_only_load fixed-point unset main
461 queue_only_load_latch boolean true main 4.68
462 queue_only_override boolean true main 4.21
463 queue_run_in_order boolean false main 1.70
464 queue_run_max integer 5 main
465 queue_smtp_domains domain list unset main
466 quota string* unset appendfile 1.60
467 quota_directory string* unset appendfile 4.11
468 quota_filecount integer 0 appendfile 2.05
469 quota_is_inclusive boolean true appendfile 3.20
470 quota_size_regex string unset appendfile 3.14
471 quota_warn_message string* + appendfile 2.10
472 quota_warn_threshold string* 0 appendfile 2.10
473 rcpt_include_affixes boolean false transports 4.21
474 receive_timeout time 0s main 4.00 replacing accept_timeout
475 received_header_text string* + main
476 received_headers_max integer 30 main
477 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
478 recipients_max integer* 50000 main 1.60 default changed in 4.95 (was 0)
479 recipients_max_reject boolean false main 1.70
480 redirect_router string unset routers 4.00
481 remote_max_parallel integer 1 main
482 remote_sort_domains domain list unset main 4.00 replacing remote_sort
483 repeat_use boolean true redirect 4.00
484 reply_to string* unset autoreply 2.05
485 reply_transport string* unset redirect 4.00
486 require_files string list* unset routers 4.00
487 reroute string* unset iplookup 4.00
488 response_pattern string unset iplookup 4.00
489 restrict_to_path boolean false pipe
490 retry_data_expire time 7d main 3.03
491 retry_include_ip_address boolean true smtp 1.92
492 retry_interval_max time 24h main
493 retry_use_local_part boolean + routers 4.00
494 + transports 4.00 replacing individual options
495 return_fail_output boolean false pipe 1.60
496 return_message boolean false autoreply
497 return_output boolean false pipe
498 return_path string* unset transports 2.05
499 return_path_add boolean false transports
500 return_path_remove boolean true main
501 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
502 rewrite boolean true redirect 4.00
503 rewrite_headers boolean true dnslookup 4.00
504 rfc1413_hosts host list * main
505 rfc1413_query_timeout time 5s main
506 router_home_directory string* unset routers 4.11
507 route_data string* unset manualroute 4.00
508 route_list string list unset manualroute 4.00
509 same_domain_copy_routing boolean false dnslookup 4.00
510 search_parents boolean false dnslookup 4.00
511 self string "freeze" routers 4.00
512 sender_unqualified_hosts host list unset main
513 senders address list unset routers 4.00
514 serialize_hosts host list unset smtp 1.60
515 server_advertise_condition string* unset authenticators 4.14
516 server_channelbinding bool false gsasl 4.80
517 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
518 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
519 server_keytab string* unset heimdal_gssapi 4.80
520 server_mail_auth_condition string* unset authenticators 3.22
521 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
522 server_password string unset gsasl 4.80
523 server_param1 string* unset tls (auth) 4.86
524 server_param2 string* unset tls (auth) 4.86
525 server_param3 string* unset tls (auth) 4.86
526 server_param2 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
527 server_param3 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
528 server_prompts string* unset plaintext 3.10
529 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
530 server_scram_iter string* unset gsasl 4.80
531 server_scram_salt string* unset gsasl 4.80
532 server_secret string* unset cram_md5 3.10
533 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
534 server_set_id string* unset authenticators 3.10
535 set string* unset routers 4.93
536 shadow_condition string* unset transports
537 shadow_transport string unset transports
538 sieve_inbox string* "inbox" redirect 4.99
539 sieve_enotify_mailto_owner string* "inbox" redirect
540 sieve_subaddress string* "inbox" redirect
541 sieve_useraddress string* "inbox" redirect
542 sieve_vacation_directory string* "inbox" redirect
543 size_addition integer 1024 smtp 1.91
544 skip_syntax_errors boolean false redirect 4.00
545 smtp_accept_keepalive boolean true main
546 smtp_accept_max integer 20 main
547 smtp_accept_max_nonmail integer 10 main 4.11
548 smtp_accept_max_nonmail_hosts host list * main 4.14
549 smtp_accept_max_per_connection integer 1000 main 4.00
550 smtp_accept_max_per_host integer 0 main 2.05
551 smtp_accept_queue integer 0 main
552 smtp_accept_queue_per_connection integer 10 main 2.03
553 smtp_accept_reserve integer 0 main
554 smtp_active_hostname string* unset main 4.33
555 smtp_backlog_monitor integer 0 main 4.95
556 smtp_banner string* + main
557 smtp_check_spool_space boolean true main 2.10
558 smtp_connect_backlog integer 5 main
559 smtp_enforce_sync boolean true main 4.00
560 smtp_etrn_command string* unset main 1.92
561 smtp_etrn_serialize boolean true main 1.89
562 smtp_load_reserve fixed-point unset main
563 smtp_max_synprot_errors integer 3 main 4.30
564 smtp_max_unknown_commands integer 3 main 4.14
565 smtp_ratelimit_hosts host list unset main 4.00
566 smtp_ratelimit_mail string unset main 4.00
567 smtp_ratelimit_rcpt string unset main 4.00
568 smtp_receive_timeout time 5m main
569 smtp_reserve_hosts host list unset main
570 smtp_return_error_details boolean false main 4.11
571 socket string* unset lmtp 4.11
572 spamd_address string* + main 4.50 with content scan
573 spf_guess string "v=spf1 a/24 mx/24 ptr ?all"
574 main 4.91 with SUPPORT_SPF
575 spf_smtp_comment_template string* "Please see http://www.open-spf.org/Why"
576 main 4.94 with SUPPORT_SPF
577 split_spool_directory boolean false main 1.70
578 spool_directory string ++ main
579 spool_wireformat boolean false main 4.90
580 sqlite_dbfile string* unset main 4.94 with LOOKUP_SQLITE
581 sqlite_lock_timeout time 5s main 4.53
582 strict_acl_vars boolean false main 4.64
583 srv_fail_domains domain list unset dnslookup 4.43
584 strip_excess_angle_brackets boolean false main
585 strip_trailing_dot boolean false main
586 subject string* unset autoreply
587 syntax_errors_text string* unset redirect 4.00
588 syntax_errors_to string unset redirect 4.00
589 syslog_duplication boolean true main 4.21
590 syslog_facility string unset main 4.20
591 syslog_processname string "exim" main 4.20
592 syslog_timestamp boolean true main 4.00
593 system_filter string unset main 4.00 replacing message_filter
594 system_filter_directory_transport string unset main 4.00 replacing message_filter
595 system_filter_file_transport string unset main 4.00 replacing message_filter
596 system_filter_group string unset main 4.00 replacing message_filter
597 system_filter_pipe_transport string unset main 4.00 replacing message_filter
598 system_filter_reply_transport string unset main 4.00 replacing message_filter
599 system_filter_user string unset main 4.00 replacing message_filter
600 tcp_nodelay boolean true main 4.23
602 tcp_wrappers_daemon_name string* ++ main 4.73
603 temp_errors string list + pipe 1.95
604 text string* unset autoreply
605 timeout time 5m lmtp 3.20
609 timeout_defer boolean false pipe 4.51
610 timeout_frozen_after time 0s main 3.20
611 timezone string + main 3.15
612 tls_advertise_hosts host list * main 3.20
613 tls_alpn string* unset main 4.95
615 tls_certificate string* unset main 3.20
617 tls_dh_max_bits integer 2236 main 4.80
618 tls_dh_min_bits integer 1024 smtp 4.82
619 tls_dhparam string* unset main 3.20
620 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
621 tls_on_connect_ports string unset main 4.43
622 tls_privatekey string* unset main 3.20
624 tls_remember_emstp boolean false main 4.21
625 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
626 string* unset main 4.33
627 tls_resumption_hosts host list* unset main 4.95
628 host list* unset smtp 4.95
629 tls_sni string* unset main 4.80
630 tls_tempfail_tryclear boolean true smtp 4.05
631 tls_try_verify_hosts host list unset main 4.00
632 tls_verify_certificates string* unset main 3.20
634 tls_verify_hosts host list unset main 3.20
635 to string* unset autoreply
636 translate_ip_address string unset routers 4.00
637 transport string* unset routers 4.00
638 transport_current_directory string unset routers 4.00
639 transport_home_directory string unset routers 4.00
640 transport_filter string unset transports
641 transport_filter_timeout time 5m transports 4.30
642 trusted_groups string list unset main
643 trusted_users string list unset main
644 umask octal-integer 022 pipe
645 unknown_login string unset main
646 unknown_username string unset main
647 unseen boolean false routers 4.00
648 untrusted_set_sender boolean false main 3.20
649 use_bsmtp boolean false appendfile 4.00
651 use_crlf boolean false appendfile 1.89
653 use_fcntl_lock boolean + appendfile 1.70
654 use_flock_lock boolean + appendfile 4.11
655 use_lockfile boolean + appendfile
656 use_mbx_lock boolean + appendfile 2.10
657 use_shell boolean false pipe 1.70
658 user string + routers 4.00
659 unset transports 4.00 replaces individual options
660 utf8_downconvert integer unset smtp 4.92 if SUPPORT_I18N
661 uucp_from_pattern string + main 1.75
662 uucp_from_sender string* "$1" main 1.75
663 verify boolean true routers 4.00
664 verify_only boolean false routers 4.00
665 verify_recipient boolean true routers 4.00
666 verify_sender boolean true routers 4.00
667 warn_message_file string* unset main 4.00 expanded from 4.94
668 widen_domains string list unset dnslookup 4.00
669 write_rejectlog boolean true main 4.31
673 2. COMMAND LINE OPTIONS
674 -----------------------
676 The table below contains a complete list of all Exim's command line options.
677 Those marked with # are available only to trusted users, those marked with +
678 are available only to admin users, and those marked with * exist only to
679 provide compatibility with Sendmail.
682 --help Give a little help (not a lot)
683 --version Give version information (alias for -bV)
686 -bdf + Start daemon and run it in the foreground
687 -be Test string expansion
688 -bem Test string expansion, read test message first
689 -bF Test system filter file
690 -bf Test user filter file
691 -bfd Set domain for filter testing
692 -bfl Set local part for filter testing
693 -bfp Set local part prefix for filter testing
694 -bfs Set local part suffix for filter testing
695 -bh Test incoming SMTP call, omitting callouts
696 -bhc Test incoming SMTP call, with callouts
697 -bi * Run <command>bi_command</command>
698 -bI:help Show list of accepted -bI:<tag> options
699 -bm Accept message on standard input
700 -bmalware + Invoke configured malware scanning against supplied filename
701 -bnq Don't qualify addresses in locally submitted messages
702 -bP Show configuration option settings
704 -bpa + ... with generated addresses as well
705 -bpc + ... but just show a count of messages
706 -bpr + ... do not sort
707 -bpra + ... with generated addresses, unsorted
708 -bpru + ... only undelivered addresses, unsorted
709 -bpu + ... only undelivered addresses
710 -brt Test retry rules
711 -brw Test rewriting rules
712 -bS Read batch SMTP on standard input
713 -bs Run SMTP on standard input and output
714 -bt Test address directing and routing
715 -bV Verify version number
716 -bv Test recipient address verification
717 -bvs Test sender address verification
718 -bw + Inetd wait mode
719 -C + Use alternate configuration file
720 -D + Define macro for configuration file
721 -d + Turn on debugging output
722 -dd + Ditto, but if a daemon, not for subprocesses
723 -dropcr Remove CR character in input: became a no-op in 4.21
725 -ex * Synonym for -oex (for several different x)
726 -F Set calling user name
727 -f # Set calling user address
730 -i Dot does not terminate message
731 -M + Force deliver specific message
732 -Mar + Add recipient to message
733 -MC Internal use only
734 -MCA Internal use only
735 -MCP Internal use only
736 -MCQ Internal use only
737 -MCS Internal use only
738 -MCT Internal use only
739 -Mc + Deliver specific message
740 -Mes + Edit message sender
741 -Mf + Freeze message(s)
742 -Mg + Give up (bounce) message(s)
743 -Mmad + Mark all recipients delivered
744 -Mmd + Mark one recipient delivered
745 -Mrm + Remove message(s) (no bounce)
746 -Mset + Load message's variables when testing with -be
747 -Mt + Thaw message(s)
748 -Mvb + View message body
749 -Mvc + View entire message in RFC 2822 format
750 -Mvh + View message header
751 -Mvl + View message log
753 -N + Deliver without transporting
756 -oA * Supply argument for <option>-bi</option>
757 -oB Set max messages down one connection
758 -odb Background delivery
759 -odf Foreground delivery
760 -odi Foreground delivery
761 -odq Queue message; do not deliver
762 -odqs ... do not do SMTP deliveries
763 -oee Error sent by mail; zero return code
764 -oem Error sent by mail; non-zero return code
765 -oep Error written to standard error stream
766 -oeq * Error written to standard error stream
767 -oew * Error sent by mail; non-zero return code
768 -oi Dot does not terminate message
769 -oitrue * Dot does not terminate message
770 -oMa # Supply host address
771 -oMaa # Supply authenticator name
772 -oMai # Supply authenticated id
773 -oMas # Supply authenticated sender
774 -oMi # Supply interface address
775 -oMm # Supply message reference
776 -oMr # Supply protocol name
777 -oMs # Supply host name
778 -oMt # Supply ident string
781 -oP * Specify path for daemon's pid file
782 -or Timeout non-SMTP messages
783 -os Timeout for SMTP messages
784 -ov * Verbose; same as -v
785 -oX Alternative port for daemon
786 -pd Delay Perl interpreter start
787 -ps Do not delay Perl interpreter start
788 -p<r>:<s> * Same as -oMr <r> -oMs <s>
790 -qf + ... force delivery ) Other combinations are
791 -qff + ... and include frozen messages ) possible. The syntax is
792 -qi + ... initial deliveries only )
793 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
794 -qq + Two-stage queue run )
797 -R Select by recipient in queue run
799 -Rff ... and frozen messages
800 -Rr ... using regular expression
801 -Rrf ... with forcing
802 -Rrff ... and frozen messages
804 -S Select by sender in queue run
806 -Sff ... and frozen messages
807 -Sr ... using regular expression
808 -Srf ... with forcing
809 -Srff ... and frozen messages
810 -Tqt * Used by Exim test suite; not recognized in normal use
811 -t Take recipients from header lines
813 -tls-on-connect Do TLS on startup (for legacy clients)
815 -v Verbose - shows SMTP dialogue and other delivery info
816 -x Ignored (AIX compatibility)
819 3. BUILD TIME OPTIONS FOR EXIM
820 ------------------------------
822 The table below contains a "mostly" complete list of options that can be
823 set in Local/Makefile when building Exim. The only items not included are
824 those whose names can be trivially derived from rules stated below.
826 More information about individual options can be found in src/EDITME and
829 The second column below gives the type of option:
831 . `system' means the option is concerned with the operating system;
833 . `driver' means the option selects a driver to be included in the binary;
835 . `lookup' means the option selects a lookuptype to be included in the binary;
837 . `mandatory' means the option is required to be supplied;
839 . `recommended' means the option is recommended to be supplied;
841 . `optional' means what it says;
843 Those marked with * are specialized and are unlikely to be required in most
844 installations. Those that are marked with ** are commonly set in OS-specific
845 Makefiles. If you use any of these in your Local/Makefile, you may need to
846 reproduce some of the OS-specific settings. For example, in the Makefile for
847 Solaris (which is actually called OS/Makefile-SunOS5), there is
849 LIBS=-lsocket -lnsl -lkstat
851 If you use LIBS to add extra libraries, you must also include the OS ones in
852 your setting. It is better, in this particular case, to use EXTRALIBS, which is
853 empty by default, and is provided for just this reason. Of course, if you do
854 actually want to modify a setting from the OS-specific file, there is nothing
855 to stop you overriding it in your Local/Makefile.
857 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
858 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
859 libraries specific only to that module. These rules are only used where the
860 relevant lookup is a module. These options are not explicitly listed below.
862 Variables with names endined `_PC' are used for pkg-config integration; setting
863 the value to the name of a pkg-config package will cause Exim's build system to
864 query the --cflags and --libs for the given name, when building anything
865 dependent upon the component associated with the `_PC' variable. For lookups,
866 if the lookup is dynamically loaded, then this *replaces* the use of the
867 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
868 is statically loaded into Exim, the results will be inserted into the
869 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
870 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
871 only listed below for the TLS implementation cases.
874 Option Type Description
875 ------------------------------------------------------------------------------
877 ALT_CONFIG_PREFIX optional restricts location of -C files
878 APPENDFILE_MODE optional*
879 APPENDFILE_DIRECTORY_MODE optional*
880 APPENDFILE_LOCKFILE_MODE optional*
881 AR system command to build a library
882 AUTH_CRAM_MD5 driver include cram_md5 authenticator
883 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
884 AUTH_GSASL driver include GNU SASL authenticator
885 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
886 AUTH_LIBS system library linkage for authenticators
887 AUTH_PLAINTEXT driver include plaintext authenticator
888 AUTH_SPA driver include SPA (NTLM) authenticator
889 AUTH_VARS=3 optional* number of $auth variables
890 BASENAME_COMMAND system** path to basename
891 BASE_62=62 optional* not normally changed for Unix
892 BIN_DIRECTORY mandatory Exim binary directory
893 CC system** C compiler
894 CFLAGS system** flags for C compiler
895 CFLAGS_DYNAMIC system** extra flags needed for .so modules
896 CHGRP_COMMAND system** path to chgrp
897 CHOWN_COMMAND system** path to chown
898 COMPRESS_COMMAND system path to a compress command
899 COMPRESS_SUFFIX system suffix added to compressed files
900 CONFIGURE_FILE mandatory Exim runtime configuration file
901 CONFIGURE_FILE_USE_EUID optional*
902 CONFIGURE_FILE_USE_NODE optional*
903 CONFIGURE_GROUP optional* alternate group for configuration file
904 CONFIGURE_OWNER optional* alternate owner for configuration file
905 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
906 DBMLIB optional** location of DBM library
907 DB_DIRECTORY_MODE optional* mode for hints directory
908 DB_LOCKFILE_MODE optional* mode for hints lock files
909 DB_LOCK_TIMEOUT optional* timeout for hints lock files
910 DB_MODE optional* mode for hints files
911 DEFAULT_CRYPT optional default crypt() function
912 DELIVER_IN_BUFFER_SIZE optional*
913 DELIVER_OUT_BUFFER_SIZE optional*
914 DISABLE_DKIM optional disables DKIM support
915 DISABLE_DNSSEC optional disables attempts to use DNSSEC
916 DISABLE_D_OPTION optional disables -D option
917 ERRNO_QUOTA optional* error code for system quota failures
918 EXICYCLOG_MAX optional number of old log files to keep
919 EXIMDB_DIRECTORY_MODE optional* for hints database directory
920 EXIMDB_LOCKFILE_MODE optional* for hints lock files
921 EXIMDB_MODE optional* mode for hints files
922 EXIMON_TEXTPOP system**
924 EXIM_GROUP mandatory group to use for Exim
925 EXIM_MONITOR optional set to eximon.bin to compile
927 EXIM_USER mandatory user to use for Exim
928 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
929 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
930 EXIWHAT_MULTIKILL_CMD system**
931 EXIWHAT_MULTIKILL_ARG system**
932 EXIWHAT_PS_ARG system** to list all processes
933 EXIWHAT_PS_CMD system** path to ps command
934 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
935 EXTRALIBS system additional libraries
936 EXTRALIBS_EXIM system additional libraries for Exim only
937 EXTRALIBS_EXIMON system additional libraries for the monitor
938 FIXED_NEVER_USERS optional can't override at runtime
939 HAVE_ICONV system the iconv() function is available
940 HAVE_IPV6 system include IPv6 support
941 HEADERS_CHARSET optional charset for decoded header lines
942 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
943 HEADER_MAXSIZE optional* max memory for message header
944 HOSTNAME_COMMAND system** path to hostname command
945 INCLUDE system path to include files
946 INFO_DIRECTORY optional directory for Info documentation
947 INPUT_DIRECTORY_MODE optional mode for input directory
948 IPV6_INCLUDE system additional includes for IPv6
949 IPV6_LIBS system additional libraries for IPv6
950 LDAP_LIB_TYPE optional type of LDAP library
951 LFLAGS system** link editor flags
952 LIBIDENTCFLAGS system C flags when compiling libident
953 LIBIDENTNAME system name for libident library
954 LIBRESOLV system** library for DNS resolver
955 LIBS system** additional libraries
956 LIBS_EXIM system** additional libraries for Exim ony
957 LIBS_EXIMON system** additional libraries for monitor
958 LOCAL_SCAN_SOURCE optional location of local_scan() source
959 LOG_DIRECTORY_MODE optional mode for log directory
960 LOG_FILE_PATH optional path to log files
961 LOG_MODE optional mode for log files
962 LOOKUP_CDB lookup include cdb lookup
963 LOOKUP_DBM lookup include dbm lookup
964 LOOKUP_DNSDB lookup include dnsdb lookup
965 LOOKUP_DSEARCH lookup include dsearch lookup
966 LOOKUP_INCLUDE lookup include files for lookups
967 LOOKUP_LDAP lookup include ldap lookup
968 LOOKUP_LIBS lookup include libraries for lookups
969 LOOKUP_LSEARCH lookup include all lsearch lookups
970 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
971 LOOKUP_MYSQL lookup include mysql lookup
972 LOOKUP_NIS lookup include nis lookup
973 LOOKUP_NISPLUS lookup include nisplus lookup
974 LOOKUP_ORACLE lookup include oracle lookup
975 LOOKUP_PGSQL lookup include pgsql lookup
976 LOOKUP_TESTDB lookup*
977 LOOKUP_WHOSON lookup include whoson lookup
978 LOOKUP_*_INCLUDE optional* include files for dynamic module
979 LOOKUP_*_LIBS optional* libraries for dynamic module
980 MAKE_SHELL optional* shell to use for make
981 MAX_FILTER_SIZE optional* max file size for filter files
982 MAX_INCLUDE_SIZE optional* max file size for :include: files
983 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
984 MAX_NAMED_LIST optional* max named lists of a given type
985 MAX_INTERFACES system maximum network interfaces
986 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
987 MV_COMMAND system path to mv command
988 NO_SYMLINK optional install doesn't make 'exim" symlink
989 PCRE_CONFIG system* use pcre-config for PCRE support
990 PCRE_LIBS system* library for using PCRE
991 PERL_CC system* compiler for Perl interface code
992 PERL_CCOPTS system* flags for same
993 PERL_COMMAND system path to Perl
994 PERL_LIBS system* library for compiling Perl interface
995 PID_FILE_PATH optional path to daemon's pid file
996 RADIUS_CONFIG_FILE optional path to Radius config file
997 RADIUS_LIB_TYPE optional type of RADIUS library
998 RANLIB system** path to ranlib command
999 RM_COMMAND system path to rm command
1000 ROUTER_ACCEPT driver include accept router
1001 ROUTER_DNSLOOKUP driver include dnslookup router
1002 ROUTER_MANUALROUTE driver include manualroute router
1003 ROUTER_IPLITERAL driver include ipliteral router
1004 ROUTER_IPLOOKUP driver include iplookup router
1005 ROUTER_REDIRECT driver include redirect router
1006 ROUTER_QUERYPROGRAM driver include queryprogram router
1007 SPOOL_DIRECTORY recommended path to spool directory
1008 SPOOL_DIRECTORY_MODE optional mode of spool directory
1009 SPOOL_MODE optional mode of spool files
1010 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
1011 STRIP_COMMAND optional* can be used to strp binaries
1012 SUPPORT_A6 optional* support A6 DNS records
1013 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
1014 SUPPORT_MAILDIR optional support for maildir delivery
1015 SUPPORT_MAILSTORE optional support for mailstore delivery
1016 SUPPORT_MBX optional support for MBX delivery
1017 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
1018 SUPPORT_PAM optional support for PAM authentication
1019 SUPPORT_TLS optional support for TLS encryption over SMTP
1020 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
1021 SYSLOG_LOG_PID optional add pid to syslog lines
1022 SYSLOG_LONG_LINES optional do not split long syslog lines
1023 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
1024 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
1025 TIMEZONE_DEFAULT optional default for timezone option
1026 TLS_INCLUDE optional path to include files for TLS
1027 TLS_LIBS optional additional libraries for TLS
1028 EXIM_TMPDIR system value for TMPDIR environment variable
1029 TRANSPORT_APPENDFILE driver include appendfile transport
1030 TRANSPORT_AUTOREPLY driver include autoreply transport
1031 TRANSPORT_LMTP driver include lmtp transport
1032 TRANSPORT_PIPE driver include pipe transport
1033 TRANSPORT_SMTP driver include smtp transport
1034 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
1035 USE_DB system** use native DB interface
1036 USE_GNUTLS optional use GnuTLS instead of OpenSSL
1037 USE_GNUTLS_PC optional probably "gnutls"
1038 USE_OPENSSL_PC optional probably "openssl"
1039 USE_READLINE optional try to load libreadline for -be
1040 USE_TCP_WRAPPERS system link with tcpwrappers
1041 USE_TDB optional use the tdb DB interface
1042 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
1043 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
1044 X11 system** X11 base directory
1045 X11_LD_LIB system** X11 link library
1046 XINCLUDE system** X11 include directory
1047 XLFLAGS system** X11 link time flags
1048 ZCAT_COMMAND system path to zcat command
1051 4. BUILD TIME OPTIONS FOR EXIMON
1052 --------------------------------
1054 The table below contains a complete list of options that can be set in
1055 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1056 ** it means that the text string is too long to fit in the table and is instead
1057 given below. A blank default means that there is no default value.
1059 ACTION_OUTPUT=no show output for every action
1060 ACTION_QUEUE_UPDATE=yes update queue display after actions
1061 BODY_MAX=20000 maximum body display
1062 DOMAIN= domain to strip from window title
1063 LOG_BUFFER=20K buffer for log tail
1064 LOG_DEPTH=300 depth of log subwindow
1065 LOG_FONT=** font for log display
1066 LOG_STRIPCHARTS=** patterns for stripcharts
1067 LOG_WIDTH=950 width of log subwindow
1068 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1069 MIN_HEIGHT=162 minimum window height
1070 MIN_WIDTH=103 minimum window width
1071 QUALIFY_DOMAIN= local domain to strip from addresses
1072 QUEUE_DEPTH=200 depth of queue subwindow
1073 QUEUE_FONT=$LOG_FONT font for queue display
1074 QUEUE_INTERVAL=300 queue refresh interval
1075 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1076 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1077 QUEUE_WIDTH=950 width of queue subwindow
1078 SIZE_STRIPCHART= request partition size stripchart
1079 SIZE_STRIPCHART_NAME=space name for size stripchart
1080 START_SMALL=no if yes, start with small window
1081 STRIPCHART_INTERVAL=60 stripchart refresh interval
1082 TEXT_DEPTH=200 depth of text windows
1083 WINDOW_TITLE="${hostname} eximon" window title
1085 The default for LOG_FONT is
1087 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1089 and the default for LOG_STRIPCHARTS is
1091 LOG_STRIPCHARTS='/ <= /in/
1093 / => .+ R=local/local/
1094 / => .+ T=[^ ]*smtp/smtp/'
1096 That is, there are four stripcharts, named in, out, local, and smtp. The first
1097 counts message arrivals, the second counts all deliveries, the third counts
1098 deliveries where the router's name starts with "local", and the fourth counts
1099 deliveries where the transport name contains "smtp".
1101 **** End of OptionLists ****
git://git.exim.org / exim.git / blob