src/OS/Makefile-Base

   1 # This file is the basis of the main makefile for Exim and friends. The
   2 # makefile at the top level arranges to build the main makefile by calling
   3 # scripts/Configure-Makefile from within the build directory. This
   4 # concatentates the configuration settings from Local/Makefile and other,
   5 # optional, Local/* files at the front of this file, to create Makefile in the
   6 # build directory.
   7
   8 SHELL      = $(MAKE_SHELL)
   9 SCRIPTS    = ../scripts
  10 O          = ../OS
  11 EDITME     = ../Local/Makefile
  12 EXIMON_EDITME = ../Local/eximon.conf
  13
  14 # The compiler used for linking is normally the same as the compiler used for
  15 # compiling. However, by giving it a different name, we can override it from
  16 # the command line, and this is helpful for certain types of testing.
  17
  18 LNCC = $(CC)
  19
  20 # The compile commands can be very long. To make the output look better,
  21 # they are not normally echoed in full. To get full echoing, the caller
  22 # must set FULLECHO='' on the command line and call make with -e. We default
  23 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  24
  25 FULLECHO = @
  26 FE       = $(FULLECHO)
  27
  28 # The default target double-checks the existence of $(EDITME) and then arranges
  29 # to touch it if it exists and any of the optional configuration files, which
  30 # depend on the os or the architecture, have been altered. The same sub-target
  31 # does the same thing for the eximon configuration file if it exists. Then
  32 # there is a check that the Makefile (the one built from this file) is
  33 # up-to-date. Then the os-specific source files and the C configuration file
  34 # are set up, and finally it goes to the main Exim target.
  35
  36 all:       utils exim
  37 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h
  38
  39 checklocalmake:
  40         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  41           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  42           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  43         then \
  44           touch $(EDITME); \
  45         fi
  46         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  47           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  48           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  49         then \
  50           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  51         fi
  52
  53 $(EDITME):
  54         @echo " "
  55         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  56         @echo "*** appropriate changes for your site."
  57         @echo " "
  58         @false
  59
  60 $(EXIMON_EDITME):
  61         @echo " "
  62         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  63         @echo "*** appropriate changes for your site."
  64         @echo " "
  65         @test ! -d ../Local && mkdir ../Local
  66         @false
  67
  68 # Check that the local Makefile is up-to-date
  69
  70 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  71           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  72         @echo " "
  73         @echo "*** Makefile needs rebuilding"
  74         @echo "*** Please run \"make makefile\" at top level"
  75         @echo " "
  76         @false
  77
  78 # Build (link) the os.h file
  79
  80 os.h:   $(SCRIPTS)/Configure-os.h \
  81         $(O)/os.h-AIX           $(O)/os.h-BSDI  $(O)/os.h-cygwin \
  82         $(O)/os.h-Darwin        $(O)/os.h-DGUX  $(O)/os.h-DragonFly \
  83         $(O)/os.h-FreeBSD       $(O)/os.h-GNU   $(O)/os.h-GNUkFreeBSD \
  84         $(O)/os.h-GNUkNetBSD    $(O)/os.h-HI-OSF \
  85         $(O)/os.h-HI-UX         $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \
  86         $(O)/os.h-IRIX          $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \
  87         $(O)/os.h-IRIX65        $(O)/os.h-Linux $(O)/os.h-mips \
  88         $(O)/os.h-NetBSD        $(O)/os.h-NetBSD-a.out \
  89         $(O)/os.h-OpenBSD       $(O)/os.h-OpenUNIX      $(O)/os.h-OSF1 \
  90         $(O)/os.h-QNX           $(O)/os.h-SCO           $(O)/os.h-SCO_SV \
  91         $(O)/os.h-SunOS4        $(O)/os.h-SunOS5        $(O)/os.h-SunOS5-hal \
  92         $(O)/os.h-ULTRIX        $(O)/os.h-UNIX_SV \
  93         $(O)/os.h-Unixware7     $(O)/os.h-USG
  94         $(SHELL) $(SCRIPTS)/Configure-os.h
  95
  96 # Build the os.c file
  97
  98 os.c:   ../src/os.c \
  99         $(SCRIPTS)/Configure-os.c \
 100         $(O)/os.c-cygwin        $(O)/os.c-GNU   $(O)/os.c-HI-OSF \
 101         $(O)/os.c-IRIX          $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \
 102         $(O)/os.c-IRIX65        $(O)/os.c-Linux $(O)/os.c-OSF1
 103         $(SHELL) $(SCRIPTS)/Configure-os.c
 104
 105 # Build the config.h file.
 106
 107 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 108         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
 109
 110
 111 # This target is recognized specially by GNU make. It records those targets
 112 # that do not correspond to files that are being built and which should
 113 # therefore always be run, even if the files exist. This shouldn't in fact be a
 114 # problem, but it does no harm. Other make programs will just ignore this.
 115
 116 .PHONY: all config utils \
 117         buildauths buildlookups buildpdkim buildrouters \
 118         buildtransports checklocalmake clean
 119
 120
 121 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
 122         exigrep eximstats exipick exiqgrep exiqsumm \
 123         transport-filter.pl convert4r3 convert4r4 \
 124         exim_checkaccess \
 125         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
 126
 127
 128 # Targets for special-purpose configuration header builders
 129 buildconfig: buildconfig.c
 130         @echo "$(CC) buildconfig.c"
 131         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 132
 133
 134 # Target for the exicyclog utility script
 135 exicyclog: config ../src/exicyclog.src
 136         @rm -f exicyclog
 137         @sed \
 138           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 139           -e "/^# /p" \
 140           -e "/^# /d" \
 141           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 142           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 143           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 144           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 145           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 146           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 147           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 148           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 149           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 150           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 151           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 152           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 153           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 154           ../src/exicyclog.src > exicyclog-t
 155         @mv exicyclog-t exicyclog
 156         @chmod a+x exicyclog
 157         @echo ">>> exicyclog script built"
 158
 159 # Target for the exinext utility script
 160 exinext: config ../src/exinext.src
 161         @rm -f exinext
 162         @sed \
 163           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 164           -e "/^# /p" \
 165           -e "/^# /d" \
 166           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 167           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 168           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 169           ../src/exinext.src > exinext-t
 170         @mv exinext-t exinext
 171         @chmod a+x exinext
 172         @echo ">>> exinext script built"
 173
 174 # Target for the exiwhat utility script
 175 exiwhat: config ../src/exiwhat.src
 176         @rm -f exiwhat
 177         @sed \
 178           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 179           -e "/^# /p" \
 180           -e "/^# /d" \
 181           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 182           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 183           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 184           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 185           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 186           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 187           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 188           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 189           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 190           ../src/exiwhat.src > exiwhat-t
 191         @mv exiwhat-t exiwhat
 192         @chmod a+x exiwhat
 193         @echo ">>> exiwhat script built"
 194
 195 # Target for the exim_checkaccess utility script
 196 exim_checkaccess: config ../src/exim_checkaccess.src
 197         @rm -f exim_checkaccess
 198         @sed \
 199           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 200           -e "/^# /p" \
 201           -e "/^# /d" \
 202           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 203           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 204           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 205           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 206           ../src/exim_checkaccess.src > exim_checkaccess-t
 207         @mv exim_checkaccess-t exim_checkaccess
 208         @chmod a+x exim_checkaccess
 209         @echo ">>> exim_checkaccess script built"; echo ""
 210
 211 # Target for the Exim monitor start-up script
 212 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
 213           ../Local/eximon.conf
 214         @rm -f eximon
 215         $(SHELL) $(SCRIPTS)/Configure-eximon
 216         @sed \
 217           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 218           -e "/^# /p" \
 219           -e "/^# /d" \
 220           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 221           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 222           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 223           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 224           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 225           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 226           ../src/eximon.src >> eximon
 227         @echo ">>> eximon script built"; echo ""
 228
 229 # Targets for utilities; these are all Perl scripts that have to get the
 230 # location of Perl put in them. A few need other things as well.
 231
 232 exigrep: Makefile ../src/exigrep.src
 233         @rm -f exigrep
 234         @sed \
 235           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 236           -e "/^# /p" \
 237           -e "/^# /d" \
 238           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 239           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 240           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 241           ../src/exigrep.src > exigrep-t
 242         @mv exigrep-t exigrep
 243         @chmod a+x exigrep
 244         @echo ">>> exigrep script built"
 245
 246 eximstats: Makefile ../src/eximstats.src
 247         @rm -f eximstats
 248         @sed \
 249           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 250           ../src/eximstats.src > eximstats-t
 251         @mv eximstats-t eximstats
 252         @chmod a+x eximstats
 253         @echo ">>> eximstats script built"
 254
 255 exiqgrep: Makefile ../src/exiqgrep.src
 256         @rm -f exiqgrep
 257         @sed \
 258           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 259           -e "/^# /p" \
 260           -e "/^# /d" \
 261           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 262           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 263           ../src/exiqgrep.src > exiqgrep-t
 264         @mv exiqgrep-t exiqgrep
 265         @chmod a+x exiqgrep
 266         @echo ">>> exiqgrep script built"
 267
 268 exiqsumm: Makefile ../src/exiqsumm.src
 269         @rm -f exiqsumm
 270         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 271           ../src/exiqsumm.src > exiqsumm-t
 272         @mv exiqsumm-t exiqsumm
 273         @chmod a+x exiqsumm
 274         @echo ">>> exiqsumm script built"
 275
 276 exipick: Makefile ../src/exipick.src
 277         @rm -f exipick
 278         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 279           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 280           ../src/exipick.src > exipick-t
 281         @mv exipick-t exipick
 282         @chmod a+x exipick
 283         @echo ">>> exipick script built"
 284
 285 transport-filter.pl: Makefile ../src/transport-filter.src
 286         @rm -f transport-filter.pl
 287         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 288           ../src/transport-filter.src > transport-filter.pl-t
 289         @mv transport-filter.pl-t transport-filter.pl
 290         @chmod a+x transport-filter.pl
 291         @echo ">>> transport-filter.pl script built"
 292
 293 convert4r3: Makefile ../src/convert4r3.src
 294         @rm -f convert4r3
 295         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 296           ../src/convert4r3.src > convert4r3-t
 297         @mv convert4r3-t convert4r3
 298         @chmod a+x convert4r3
 299         @echo ">>> convert4r3 script built"
 300
 301 convert4r4: Makefile ../src/convert4r4.src
 302         @rm -f convert4r4
 303         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 304           ../src/convert4r4.src > convert4r4-t
 305         @mv convert4r4-t convert4r4
 306         @chmod a+x convert4r4
 307         @echo ">>> convert4r4 script built"
 308
 309
 310 # These are objects of optional features. They are always compiled, but
 311 # if the corresponding #defines are not set, they wind up empty and
 312 # are thrown away by the linker.
 313
 314 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 315 OBJ_WITH_OLD_DEMIME = demime.o
 316 OBJ_EXPERIMENTAL = bmi_spam.o \
 317                                 dane.o \
 318                                 dcc.o \
 319                                 dmarc.o \
 320                                 imap_utf7.o \
 321                                 spf.o \
 322                                 srs.o \
 323                                 utf8.o
 324
 325 # Targets for final binaries; the main one has a build number which is
 326 # updated each time. We don't bother with that for the auxiliaries.
 327
 328 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
 329
 330 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 331         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 332         filtertest.o globals.o dkim.o \
 333         header.o host.o ip.o log.o lss.o match.o moan.o \
 334         os.o parse.o queue.o \
 335         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
 336         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 337         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
 338         $(OBJ_LOOKUPS) \
 339         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 340         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 341
 342 exim:   buildlookups buildauths pdkim/pdkim.a \
 343         buildrouters buildtransports \
 344         $(OBJ_EXIM) version.o
 345         @echo "$(LNCC) -o exim"
 346         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 347           routers/routers.a transports/transports.a lookups/lookups.a \
 348           auths/auths.a pdkim/pdkim.a \
 349           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 350           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 351           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 352         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 353           echo $(STRIP_COMMAND) exim; \
 354           $(STRIP_COMMAND) exim; \
 355         fi
 356         $(EXIM_CHMOD)
 357         @echo " "
 358         @echo ">>> exim binary built"
 359         @echo " "
 360
 361 # The utility for dumping the contents of an exim database
 362
 363 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
 364
 365 exim_dumpdb: $(OBJ_DUMPDB)
 366         @echo "$(LNCC) -o exim_dumpdb"
 367         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 368           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 369         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 370           echo $(STRIP_COMMAND) exim_dumpdb; \
 371           $(STRIP_COMMAND) exim_dumpdb; \
 372         fi
 373         @echo ">>> exim_dumpdb utility built"
 374         @echo " "
 375
 376 # The utility for interrogating/fixing the contents of an exim database
 377
 378 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 379
 380 exim_fixdb:  $(OBJ_FIXDB) buildauths
 381         @echo "$(LNCC) -o exim_fixdb"
 382         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 383           auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
 384         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 385           echo $(STRIP_COMMAND) exim_fixdb; \
 386           $(STRIP_COMMAND) exim_fixdb; \
 387         fi
 388         @echo ">>> exim_fixdb utility built"
 389         @echo " "
 390
 391 # The utility for tidying the contents of an exim database
 392
 393 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
 394
 395 exim_tidydb: $(OBJ_TIDYDB)
 396         @echo "$(LNCC) -o exim_tidydb"
 397         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
 398           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 399         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 400           echo $(STRIP_COMMAND) exim_tidydb; \
 401           $(STRIP_COMMAND) exim_tidydb; \
 402         fi
 403         @echo ">>> exim_tidydb utility built"
 404         @echo " "
 405
 406 # The utility for building dbm files
 407
 408 exim_dbmbuild: exim_dbmbuild.o
 409         @echo "$(LNCC) -o exim_dbmbuild"
 410         $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
 411           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 412         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 413           echo $(STRIP_COMMAND) exim_dbmbuild; \
 414           $(STRIP_COMMAND) exim_dbmbuild; \
 415         fi
 416         @echo ">>> exim_dbmbuild utility built"
 417         @echo " "
 418
 419 # The utility for locking a mailbox while messing around with it
 420
 421 exim_lock: exim_lock.c os.h
 422         @echo "$(CC) exim_lock.c"
 423         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 424         @echo "$(LNCC) -o exim_lock"
 425         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 426           $(LIBS) $(EXTRALIBS)
 427         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 428           echo $(STRIP_COMMAND) exim_lock; \
 429           $(STRIP_COMMAND) exim_lock; \
 430         fi
 431         @echo ">>> exim_lock utility built"
 432         @echo " "
 433
 434 # The X-based Exim monitor program's binary part. There's a macro for cutting
 435 # out the modified TextPop module, because some antique link editors cannot
 436 # handle the fact that it is redefining things that are found later in the
 437 # Xaw library.
 438
 439 # Object modules that are the unique Eximon modules
 440
 441 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 442         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 443         em_text.o em_xs.o
 444
 445 # The complete modules list also includes some specially compiled versions of
 446 # code from the main Exim source tree.
 447
 448 OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
 449
 450 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
 451             ../exim_monitor/em_version.c
 452         @echo "$(CC) exim_monitor/em_version.c"
 453         $(FE)$(CC) -o em_version.o -c \
 454           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 455         @echo "$(LNCC) -o eximon.bin"
 456         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 457         $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 458           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 459         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 460           echo $(STRIP_COMMAND) eximon.bin; \
 461           $(STRIP_COMMAND) eximon.bin; \
 462         fi
 463         @echo ">>> exim monitor binary built"
 464         @echo " "
 465
 466
 467 # Compile step for most of the exim modules. HDRS is a list of headers
 468 # which cause everthing to be rebuilt. PHDRS is the same, for the use
 469 # of routers, transports, and authenticators. I can't find a way of doing this
 470 # in one. This list is overkill, but it doesn't really take much time to
 471 # rebuild Exim on a modern computer.
 472
 473 HDRS  = config.h \
 474         dbfunctions.h \
 475         dbstuff.h \
 476         exim.h \
 477         functions.h \
 478         globals.h \
 479         local_scan.h \
 480         macros.h \
 481         mytypes.h \
 482         structs.h \
 483         os.h
 484 PHDRS = ../config.h \
 485         ../dbfunctions.h \
 486         ../dbstuff.h \
 487         ../exim.h \
 488         ../functions.h \
 489         ../globals.h \
 490         ../local_scan.h \
 491         ../macros.h \
 492         ../mytypes.h \
 493         ../structs.h \
 494         ../os.h
 495
 496 .SUFFIXES: .o .c
 497 .c.o:;  @echo "$(CC) $*.c"
 498         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 499
 500 # Update Exim's version information and build the version object.
 501
 502 version.h::
 503         @../scripts/reversion
 504
 505 cnumber.h: version.h
 506
 507 version.o: $(HDRS) cnumber.h version.h version.c
 508
 509 # This is the dummy module for use by test compiles of individual modules. It
 510 # contains functions such as log_write() that may be called from bits of Exim
 511 # in the tested code.
 512
 513 dummies.o:       dummies.c
 514
 515 # Compile instructions for perl.o for when EXIM_PERL is set
 516
 517 perl.o:          $(HDRS) perl.c
 518         @echo "$(PERL_CC) perl.c"
 519         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 520
 521 # Compile instructions for the database utility modules
 522
 523 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 524         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 525         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 526                                       -DCOMPILE_UTILITY \
 527                                       -DEXIM_DUMPDB \
 528                                       -o exim_dumpdb.o exim_dbutil.c
 529
 530 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 531         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 532         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 533                                       -DCOMPILE_UTILITY \
 534                                       -DEXIM_FIXDB \
 535                                       -o exim_fixdb.o exim_dbutil.c
 536
 537 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 538         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 539         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 540                                       -DCOMPILE_UTILITY \
 541                                       -DEXIM_TIDYDB \
 542                                       -o exim_tidydb.o exim_dbutil.c
 543
 544 # Compile instructions for exim_dbmbuild
 545
 546 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 547         @echo "$(CC) exim_dbmbuild.c"
 548         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
 549
 550 # Utilities use special versions of some modules - typically with debugging
 551 # calls cut out.
 552
 553 util-spool_in.o: $(HDRS) spool_in.c
 554         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 555         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 556
 557 util-store.o:    $(HDRS) store.c
 558         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 559         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 560
 561 util-string.o:   $(HDRS) string.c
 562         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 563         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 564
 565 util-os.o:       $(HDRS) os.c
 566         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 567         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 568                                       -DCOMPILE_UTILITY \
 569                                       -DOS_LOAD_AVERAGE \
 570                                       -DFIND_RUNNING_INTERFACES \
 571                                       -o util-os.o os.c
 572
 573 # The local scan module depends only on its own special header, and is compiled
 574 # from a source whose location is set by configuration.
 575
 576 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 577         @echo "$(CC) local_scan.c"
 578         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 579
 580 # Dependencies for the "ordinary" exim modules
 581
 582 acl.o:           $(HDRS) acl.c
 583 base64.o:        $(HDRS) mime.h base64.c
 584 child.o:         $(HDRS) child.c
 585 crypt16.o:       $(HDRS) crypt16.c
 586 daemon.o:        $(HDRS) daemon.c
 587 dbfn.o:          $(HDRS) dbfn.c
 588 debug.o:         $(HDRS) debug.c
 589 deliver.o:       $(HDRS) deliver.c
 590 directory.o:     $(HDRS) directory.c
 591 dns.o:           $(HDRS) dns.c
 592 enq.o:           $(HDRS) enq.c
 593 exim.o:          $(HDRS) exim.c
 594 expand.o:        $(HDRS) expand.c
 595 filter.o:        $(HDRS) filter.c
 596 filtertest.o:    $(HDRS) filtertest.c
 597 globals.o:       $(HDRS) globals.c
 598 header.o:        $(HDRS) header.c
 599 host.o:          $(HDRS) host.c
 600 ip.o:            $(HDRS) ip.c
 601 log.o:           $(HDRS) log.c
 602 lss.o:           $(HDRS) lss.c
 603 match.o:         $(HDRS) match.c
 604 moan.o:          $(HDRS) moan.c
 605 os.o:            $(HDRS) os.c
 606 parse.o:         $(HDRS) parse.c
 607 queue.o:         $(HDRS) queue.c
 608 rda.o:           $(HDRS) rda.c
 609 readconf.o:      $(HDRS) readconf.c
 610 receive.o:       $(HDRS) receive.c
 611 retry.o:         $(HDRS) retry.c
 612 rewrite.o:       $(HDRS) rewrite.c
 613 rfc2047.o:       $(HDRS) rfc2047.c
 614 route.o:         $(HDRS) route.c
 615 search.o:        $(HDRS) search.c
 616 sieve.o:         $(HDRS) sieve.c
 617 smtp_in.o:       $(HDRS) smtp_in.c
 618 smtp_out.o:      $(HDRS) smtp_out.c
 619 spool_in.o:      $(HDRS) spool_in.c
 620 spool_out.o:     $(HDRS) spool_out.c
 621 std-crypto.o:    $(HDRS) std-crypto.c
 622 store.o:         $(HDRS) store.c
 623 string.o:        $(HDRS) string.c
 624 tls.o:           $(HDRS) tls.c setenv.c \
 625                  tls-gnu.c tlscert-gnu.c \
 626                  tls-openssl.c tlscert-openssl.c
 627 tod.o:           $(HDRS) tod.c
 628 transport.o:     $(HDRS) transport.c
 629 tree.o:          $(HDRS) tree.c
 630 verify.o:        $(HDRS) verify.c
 631 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
 632
 633 # Dependencies for WITH_CONTENT_SCAN modules
 634
 635 malware.o:       $(HDRS) malware.c
 636 mime.o:          $(HDRS) mime.h mime.c
 637 regex.o:         $(HDRS) regex.c
 638 spam.o:          $(HDRS) spam.c
 639 spool_mbox.o:    $(HDRS) spool_mbox.c
 640
 641
 642 # Dependencies for WITH_OLD_DEMIME modules
 643
 644 demime.o:       $(HDRS) demime.c
 645
 646
 647 # Dependencies for EXPERIMENTAL_* modules
 648
 649 bmi_spam.o:     $(HDRS) bmi_spam.c
 650 dane.o:         $(HDRS) dane.c dane-gnu.c dane-openssl.c
 651 dcc.o:          $(HDRS) dcc.h dcc.c
 652 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
 653 imap_utf7.o:    $(HDRS) imap_utf7.c
 654 spf.o:          $(HDRS) spf.h spf.c
 655 srs.o:          $(HDRS) srs.h srs.c
 656 utf8.o:         $(HDRS) utf8.c
 657
 658 # The module containing tables of available lookups, routers, auths, and
 659 # transports must be rebuilt if any of them are. However, because the makefiles
 660 # for the drivers are always run, we don't actually put the dependencies here,
 661 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 662 # drtables.o even though the .a files haven't in fact been updated. Instead
 663 # it is arranged that the lower-level makefiles remove drtables.o when they
 664 # rebuild the .a files.
 665
 666 drtables.o:      $(HDRS) drtables.c
 667
 668 # We depend upon object files built as part of building the lookups library
 669 # When using parallel make, we don't have the dependency to force building
 670 # in the sub-directory unless we force that dependency:
 671
 672 $(OBJ_LOOKUPS):  buildlookups
 673
 674 # The exim monitor's private modules - the sources live in a private
 675 # subdirectory. The final binary combines the private modules with some
 676 # modules from the main exim binary.
 677
 678 em_StripChart.o: ../exim_monitor/em_StripChart.c
 679 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 680 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 681 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 682 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
 683 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
 684 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
 685 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
 686 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
 687 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
 688 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
 689 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
 690 $(MONBIN): $(HDRS)
 691                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
 692                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
 693                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
 694
 695
 696 # Targets for the various libraries that Exim uses.
 697
 698 # The lookups library.
 699
 700 buildlookups: config
 701          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 702            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
 703            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
 704            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
 705          @echo " "
 706
 707 # The routers library.
 708
 709 buildrouters: config
 710          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 711            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 712            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 713          @echo " "
 714
 715 # The transports library.
 716
 717 buildtransports: config
 718          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 719            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 720            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 721          @echo " "
 722
 723 # The library of authorization modules
 724
 725 buildauths: config
 726          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 727            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 728            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 729          @echo " "
 730
 731 # The PDKIM library
 732
 733 buildpdkim: pdkim/pdkim.a
 734 pdkim/pdkim.a: config
 735          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 736            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 737            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
 738          @echo " "
 739
 740 # The "clean", "install", and "makefile" targets just pass themselves back to
 741 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 742 # for them in the build directory.
 743
 744 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
 745
 746 # Targets for building stand-alone testing programs for basic testing of
 747 # some of the building blocks. These are not integrated with the makefile-
 748 # building targets. If you change something that is going to cause the
 749 # makefile to be rebuilt, you must run "make makefile" before running one
 750 # of these.
 751
 752 # The testing programs use different versions of some modules - usually
 753 # with bits cut out that are not relevant to the test in hand. For those
 754 # that are used by several tests, we use a different name.
 755
 756 sa-globals.o:    $(HDRS) globals.c
 757         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
 758
 759 sa-os.o:         $(HDRS) os.c
 760         $(CC) -c $(CFLAGS) $(INCLUDE) \
 761                                       -DFIND_RUNNING_INTERFACES \
 762                                       -o sa-os.o os.c
 763
 764 # These are the test targets themselves
 765
 766 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
 767                string.o tod.o version.o utf8.o
 768         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
 769         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
 770           dummies.o sa-globals.o sa-os.o store.o string.o \
 771           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
 772         rm -f dbfn.o
 773
 774 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
 775                store.o string.o tod.o tree.o
 776         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
 777         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
 778         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
 779         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
 780         $(LNCC) -o test_host $(LFLAGS) \
 781           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
 782           tod.o tree.o $(LIBS) $(LIBRESOLV)
 783         rm -f child.o dummies.o host.o dns.o
 784
 785 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
 786         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
 787         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
 788           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 789         rm -f os.o
 790
 791 test_parse:  config.h parse.c dummies.o sa-globals.o \
 792              store.o string.o tod.o version.o utf8.o
 793         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
 794         $(LNCC) -o test_parse $(LFLAGS) parse.o \
 795           dummies.o sa-globals.o store.o string.o tod.o version.o \
 796           utf8.o $(LDFLAGS)
 797         rm -f parse.o
 798
 799 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
 800         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
 801         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
 802           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
 803         rm -f string.o
 804
 805 # End