4 This file contains complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.72.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_auth string* unset main 4.00
55 acl_smtp_connect string* unset main 4.11
56 acl_smtp_data string* unset main 4.00
57 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr
58 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
59 acl_smtp_etrn string* unset main 4.00
60 acl_smtp_expn string* unset main 4.00
61 acl_smtp_helo string* unset main 4.20
62 acl_smtp_mail string* unset main 4.11
63 acl_smtp_mailauth string* unset main 4.21
64 acl_smtp_mime string* unset main 4.50 with content scan
65 acl_smtp_predata string* unset main 4.43
66 acl_smtp_quit string* unset main 4.43
67 acl_smtp_rcpt string* unset main 4.00
68 acl_smtp_starttls string* unset main 4.11
69 acl_smtp_vrfy string* unset main 4.00
70 address_data string* unset routers 4.00
71 address_retry_include_sender boolean true smtp 4.64
72 address_test boolean true routers 4.14
73 admin_groups string list unset main 3.02
74 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
75 allow_commands string list* unset pipe 1.89
76 allow_defer boolean false redirect 4.00
77 allow_fail boolean false redirect 4.00
78 allow_filter boolean false redirect 4.00
79 allow_freeze boolean false redirect 4.00
80 allow_fifo boolean false appendfile 3.13
81 allow_localhost boolean false smtp 1.73
82 allow_mx_to_ip boolean false main 3.14
83 allow_symlink boolean false appendfile
84 allow_utf8_domains boolean false main 4.14
85 auth_advertise_hosts host list "*" main 4.00
86 authenticated_sender string* unset smtp 4.14
87 authenticated_sender_force boolean false smtp 4.61
88 authenticate_hosts host list unset smtp 3.13
89 auto_thaw time 0s main
90 av_scanner string* + main 4.50 with content scan
91 batch_id string unset appendfile 4.00
94 batch_max integer 100 appendfile
97 bcc string* unset autoreply
98 bi_command string unset main
99 body_only boolean false transports 2.05
100 bounce_message_file string unset main 4.00
101 bounce_message_text string unset main 4.00
102 bounce_return_body boolean true main 4.23
103 bounce_return_message boolean true main 4.00
104 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
105 bounce_sender_authentication string unset main 4.00
106 callout_domain_negative_expire time 3h main 4.11
107 callout_domain_positive_expire time 7d main 4.11
108 callout_negative_expire time 2h main 4.11
109 callout_positive_expire time 24h main 4.11
110 callout_random_local_part string* + main 4.11
111 cannot_route_message string* unset routers 4.11
112 caseful_local_part boolean false routers 4.00
113 cc string* unset autoreply
114 check_ancestor boolean false redirect 4.00
115 check_group boolean false appendfile
117 check_local_user boolean false routers 4.00
118 check_log_inodes integer 0 main
119 check_log_space integer 0 main
120 check_owner boolean true appendfile 3.14
122 check_rfc2047_length boolean true main 4.60
123 check_secondary_mx boolean false dnslookup 4.00
124 check_spool_inodes integer 0 main
125 check_spool_space integer 0 main
126 check_string string "From " appendfile 3.03
128 check_srv string* unset dnslookup 4.31
129 client_condition string* unset authenticators 4.68
130 client_ignore_invalid_base64 boolean false plaintext 4.61
131 client_name string* + cram_md5 3.10
132 client_secret string* unset cram_md5 3.10
133 client_send string* unset plaintext 3.10
134 command string* unset lmtp 3.20
136 unset queryprogram 4.00
137 command_group string unset queryprogram 4.00
138 command_timeout time 5m smtp
139 command_user string unset queryprogram 4.00
140 commandline_checks_require_admin boolean false main 4.90
141 condition string* unset routers 4.00
142 connect_timeout time 0s smtp 1.60
143 connection_max_messages integer 500 smtp 4.00 replaces batch_max
144 create_directory boolean true appendfile
145 create_file string "anywhere" appendfile
146 current_directory string unset transports 4.00
147 unset queryprogram 4.00
148 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
149 daemon_startup_retries int 9 main 4.52
150 daemon_startup_sleep time 30s main 4.52
151 data string unset redirect 4.00
152 data_timeout time 5m smtp
153 debug_print string* unset authenticators 4.00
155 unset transports 2.00
156 debug_store boolean false main 4.90
157 delay_after_cutoff boolean true smtp
158 delay_warning time list 24h main
159 delay_warning_condition string* + main 1.73
160 deliver_drop_privilege boolean false main 4.00
161 deliver_queue_load_max fixed-point unset main 1.70
162 delivery_date_add boolean false transports
163 delivery_date_remove boolean true main
164 dkim_canon string* unset smtp 4.70
165 dkim_domain string list* unset smtp 4.72
166 dkim_private_key string* unset smtp 4.70
167 dkim_selector string* unset smtp 4.70
168 dkim_sign_headers string* (RFC4871) smtp 4.70
169 dkim_strict string* unset smtp 4.70
170 dkim_verify_signers string* $dkim_signers main 4.70
171 directory string* unset appendfile
172 directory_file string* + appendfile
173 directory_mode octal-integer 0700 appendfile
174 directory_transport string* unset redirect 4.00
175 disable_ipv6 boolean false main 4.61
176 disable_logging boolean false routers 4.11
177 false transports 4.11
178 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc
179 dmarc_history_file string unset main 4.82 if experimental_dmarc
180 dmarc_tld_file string unset main 4.82 if experimental_dmarc
181 dns_again_means_nonexist domain list unset main 1.89
182 dns_check_names_pattern string + main 2.11
183 dns_csa_search_limit integer 5 main 4.60
184 dns_csa_use_reverse boolean true main 4.60
185 dns_dnssec_ok integer -1 main 4.82
186 dns_dane_ok integer -1 main 4.83
187 dns_ipv4_lookup boolean false main 3.20
188 dns_qualify_single boolean true smtp
189 dns_retrans time 0s main 1.60
190 dns_retry integer 0 main 1.60
191 dns_search_parents boolean false smtp
192 dns_use_edns0 integer -1 main 4.76
193 domains domain list unset routers 4.00
194 driver string unset authenticators
197 drop_cr boolean false main 4.00 became a no-op in 4.21
198 dscp string unset smtp 4.82
199 dsn_from string* + main 4.67
200 envelope_to_add boolean false transports
201 envelope_to_remove boolean true main
202 environment string* unset pipe 2.95
203 errors_copy string list* unset main
204 errors_reply_to string unset main
205 errors_to string* unset routers 4.00
206 escape_string string ">From " appendfile 3.03
208 exim_group string ++ main
209 exim_path string ++ main
210 exim_user string ++ main
211 expn boolean true routers
212 extra_local_interfaces string unset main 4.21
213 extract_addresses_remove_arguments boolean true main 1.92
214 fail_verify boolean false routers
215 fail_verify_recipient boolean false routers 4.00
216 fail_verify_sender boolean false routers 4.00
217 fallback_hosts string list unset routers 4.00
219 file string* unset appendfile
222 file_expand boolean false autoreply
223 file_format string unset appendfile 3.03
224 file_must_exist boolean false appendfile
225 file_optional boolean false autoreply
226 file_transport string* unset redirect 4.00
227 filter_prepend_home boolean true redirect 4.63
228 final_timeout time 10m smtp
229 finduser_retries integer 0 main
230 forbid_blackhole boolean false redirect 4.00
231 forbid_exim_filter boolean false redirect 4.44
232 forbid_fail boolean false redirect 4.00
233 forbid_file boolean false redirect 4.00
234 forbid_filter_existstest boolean false redirect 4.00
235 forbid_filter_logwrite boolean false redirect 4.00
236 forbid_filter_lookup boolean false redirect 4.00
237 forbid_filter_perl boolean false redirect 4.00
238 forbid_filter_readfile boolean false redirect 4.00
239 forbid_filter_readsocket boolean false redirect 4.11
240 forbid_filter_reply boolean false redirect 4.00
241 forbid_filter_run boolean false redirect 4.00
242 forbid_include boolean false redirect 4.00
243 forbid_pipe boolean false redirect 4.00
244 forbid_sieve_filter boolean false redirect 4.44
245 forbid_smtp_code boolean false redirect 4.63
246 force_command boolean false pipe 4.82
247 freeze_exec_fail boolean false pipe 1.89
248 freeze_signal boolean false pipe 4.75
249 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
250 from string* unset autoreply
251 gecos_name string* unset main
252 gecos_pattern string unset main
253 gethostbyname boolean false smtp
254 gnutls_allow_auto_pkcs11 boolean false main 4.82
255 gnutls_compat_mode boolean unset main 4.70
256 gnutls_require_kx string* unset main 4.67 deprecated, warns
257 string* unset smtp 4.67 deprecated, warns
258 gnutls_require_mac string* unset main 4.67 deprecated, warns
259 string* unset smtp 4.67 deprecated, warns
260 gnutls_require_protocols string* unset main 4.67 deprecated, warns
261 string* unset smtp 4.67 deprecated, warns
262 group string + routers 4.00
263 unset transports 4.00 replaces local option in some transports
264 header_line_maxsize integer 0 (unset) main 4.14
265 header_maxsize integer 1M main 4.14
266 headers string* unset autoreply
267 headers_add string* unset routers 4.00
269 headers_charset string ++ main 4.21
270 headers_only boolean false transports 2.05
271 headers_remove string* unset routers 4.00
273 headers_rewrite string unset transports 3.20
274 helo_accept_junk_hosts host list unset main 3.00
275 helo_allow_chars string "" main 4.02
276 helo_lookup_domains domain list unset main 4.00
277 helo_data string* "$primary_hostname" smtp 3.21
278 helo_try_verify_hosts host list unset main 4.00
279 helo_verify_hosts host list unset main 1.73
280 hide_child_in_errmsg false redirect 4.00
281 hold_domains domain list unset main 1.70
282 home_directory string* unset transports 4.00 replaces individual options
283 host_all_ignored string "defer" manualroute 4.67
284 host_find_failed string "freeze" manualroute 4.00
285 host_lookup host list unset main 3.00
286 host_lookup_order string list "bydns:byaddr" main 4.30
287 host_reject_connection host list unset main 4.00
288 hosts string unset iplookup 4.00
289 string list* unset smtp
290 hosts_avoid_esmtp host list unset smtp 4.21
291 hosts_avoid_pipelining host list unset smtp 4.67
292 hosts_avoid_tls host list unset smtp 3.20
293 hosts_connection_nolog host list unset main 4.43
294 hosts_max_try integer 5 smtp 3.20
295 hosts_max_try_hardlimit integer 50 smtp 4.50
296 hosts_nopass_tls host list unset smtp 4.00
297 hosts_noproxy_tls host list "*" smtp 4.90
298 hosts_override boolean false smtp 2.11
299 hosts_randomize boolean false manualroute 4.00
301 hosts_require_auth host list unset smtp 4.00
302 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
303 hosts_require_tls host list unset smtp 3.20
304 hosts_treat_as_local domain list unset main 1.95
305 hosts_try_auth host list unset smtp 4.00
306 hosts_try_fastopen host list unset smtp 4.88
307 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
308 ibase_servers string unset main 4.23
309 ignore_bounce_errors_after time 0s main 4.00
310 ignore_eacces boolean false redirect 4.00
311 ignore_enotdir boolean false redirect 4.00
312 ignore_fromline_hosts host list unset main
313 ignore_fromline_local boolean false main 2.05
314 ignore_status boolean false pipe
315 ignore_target_hosts host list unset routers 4.00
316 include_directory string unset redirect 4.00
317 initgroups false routers 4.00
318 interface string list unset smtp 1.70
319 keep_malformed time 4d main
320 keepalive boolean true smtp 2.05
321 ldap_default_servers string list unset main 3.02
322 ldap_version int 2 or 3 main 4.14
323 local_from_check boolean true main 3.14
324 local_from_prefix string unset main 3.14
325 local_from_suffix string unset main 3.14
326 local_interfaces string list unset main 1.60
327 local_part_prefix string unset routers 4.00 replaces prefix
328 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
329 local_part_suffix string unset routers 4.00 replaces suffix
330 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
331 local_parts string list* unset routers 4.00
332 local_scan_timeout time 5m main 4.03
333 local_sender_retain boolean false main 4.00
334 localhost_number string unset main
335 lock_fcntl_timeout time 0s appendfile 3.14
336 lock_flock_timeout time 0s appendfile 4.11
337 lock_interval time 3s appendfile
338 lock_retries integer 10 appendfile
339 lockfile_mode octal-integer 0600 appendfile
340 lockfile_timeout time 30m appendfile
341 log string* unset autoreply
342 log_as_local boolean + routers 4.00
343 log_file_path string list ++ main
344 log_defer_output boolean false pipe 1.89
345 log_fail_output boolean false pipe 1.60
346 log_output boolean false pipe 1.60
347 log_selector string unset main 4.00
348 log_timezone boolean false main 4.11
349 lookup_open_max integer 25 main 2.05
350 mailbox_filecount string* unset appendfile 4.43
351 mailbox_size string* unset appendfile 4.43
352 maildir_format boolean false appendfile 1.70
353 maildir_retries integer 10 appendfile 1.70
354 maildir_tag string* unset appendfile 1.92
355 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
356 maildirfolder_create_regex string unset appendfile 4.62
357 mailstore_format boolean false appendfile 2.00
358 mailstore_prefix string* unset appendfile 2.00
359 mailstore_suffix string* unset appendfile 2.00
360 match_directory string* unset localuser
361 max_output integer 20K pipe
362 max_rcpt integer 100 smtp 1.60
363 max_user_name_length integer 0 main
364 mbx_format boolean false appendfile 2.10
365 message_body_newlines boolean false main 4.68
366 message_body_visible integer 500 main
367 message_id_header_domain string* unset main 4.11
368 message_id_header_text string* unset main
369 message_logs boolean true main 4.10
370 message_prefix string* + appendfile 4.00 replaces prefix
371 string* unset pipe 4.00 replaces prefix
372 message_size_limit integer 50M main
374 message_suffix string* + appendfile 4.00 replaces suffix
375 string* unset pipe 4.00 replaces suffix
376 mode octal-integer 0600 appendfile
378 mode_fail_narrower boolean true appendfile 1.70
379 modemask octal-integer 022 redirect 4.00
380 more boolean true routers 4.00
381 move_frozen_messages boolean false main 3.09
382 multi_domain boolean true smtp
383 mx_domains domain list unset dnslookup 4.00
384 mx_fail_domains domain list unset dnslookup 4.43
385 mysql_servers string list unset main 3.03
386 never_users string list unset main
387 notify_comsat boolean false appendfile
388 once string* unset autoreply
389 once_file_size integer 0 autoreply 3.20
390 once_repeat time 0s autoreply 2.95
391 one_time boolean false redirect 4.00
392 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
393 optional boolean false iplookup 4.00
394 oracle_servers string unset main 4.00
395 owners string list unset redirect 4.00
396 owngroups string list unset redirect 4.00
397 pass_on_timeout boolean false routers 4.00
398 pass_router string unset routers 4.00
399 path string "/usr/bin" pipe
400 percent_hack_domains domain list unset main
401 perl_at_start boolean false main 2.10
402 perl_startup string unset main 2.10
403 permit_coredump boolean false pipe 4.73
404 pgsql_servers string list unset main 3.14
405 pid_file_path string ++ main
406 pipe_as_creator boolean false pipe
407 pipe_transport string* unset redirect 4.00
408 pipelining_advertise_hosts host list "*" main 4.14
409 port integer 0 iplookup 4.00
411 preserve_message_logs boolean false main
412 prdr_enable boolean false main 4.82 if experimental_prdr
413 primary_hostname string + main
414 print_topbitchars boolean false main 1.89
415 process_log_path string unset main 4.21
416 prod_requires_admin boolean true main 1.70
417 protocol string "udp" iplookup 4.00
418 string "smtp" smtp 3.20
419 public_name string unset authenticators 3.10
420 qualify_domain string + main
421 string* unset redirect 4.31
422 qualify_preserve_domain boolean false redirect 4.00
423 qualify_recipient string + main
424 qualify_single boolean true dnslookup 4.00
425 query string* + iplookup 4.00
426 queue_domains domain list unset main 4.00
427 queue_list_requires_admin boolean true main 1.95
428 queue_only boolean false main
429 queue_only_file string unset main 2.05
430 queue_only_load fixed-point unset main
431 queue_only_load_latch boolean true main 4.68
432 queue_only_override boolean true main 4.21
433 queue_run_in_order boolean false main 1.70
434 queue_run_max integer 5 main
435 queue_smtp_domains domain list unset main
436 quota string* unset appendfile 1.60
437 quota_directory string* unset appendfile 4.11
438 quota_filecount integer 0 appendfile 2.05
439 quota_is_inclusive boolean true appendfile 3.20
440 quota_size_regex string unset appendfile 3.14
441 quota_warn_message string* + appendfile 2.10
442 quota_warn_threshold string* 0 appendfile 2.10
443 rcpt_include_affixes boolean false transports 4.21
444 receive_timeout time 0s main 4.00 replacing accept_timeout
445 received_header_text string* + main
446 received_headers_max integer 30 main
447 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
448 recipients_max integer 0 main 1.60
449 recipients_max_reject boolean false main 1.70
450 redirect_router string unset routers 4.00
451 remote_max_parallel integer 1 main
452 remote_sort_domains domain list unset main 4.00 replacing remote_sort
453 repeat_use boolean true redirect 4.00
454 reply_to string* unset autoreply 2.05
455 reply_transport string* unset redirect 4.00
456 require_files string list* unset routers 4.00
457 reroute string* unset iplookup 4.00
458 response_pattern string unset iplookup 4.00
459 restrict_to_path boolean false pipe
460 retry_data_expire time 7d main 3.03
461 retry_include_ip_address boolean true smtp 1.92
462 retry_interval_max time 24h main
463 retry_use_local_part boolean + routers 4.00
464 + transports 4.00 replacing individual options
465 return_fail_output boolean false pipe 1.60
466 return_message boolean false autoreply
467 return_output boolean false pipe
468 return_path string* unset transports 2.05
469 return_path_add boolean false transports
470 return_path_remove boolean true main
471 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
472 rewrite boolean true redirect 4.00
473 rewrite_headers boolean true dnslookup 4.00
474 rfc1413_hosts host list * main
475 rfc1413_query_timeout time 5s main
476 router_home_directory string* unset routers 4.11
477 route_data string* unset manualroute 4.00
478 route_list string list unset manualroute 4.00
479 same_domain_copy_routing boolean false dnslookup 4.00
480 search_parents boolean false dnslookup 4.00
481 self string "freeze" routers 4.00
482 sender_unqualified_hosts host list unset main
483 senders address list unset routers 4.00
484 serialize_hosts host list unset smtp 1.60
485 server_advertise_condition string* unset authenticators 4.14
486 server_channelbinding bool false gsasl 4.80
487 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
488 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
489 server_keytab string* unset heimdal_gssapi 4.80
490 server_mail_auth_condition string* unset authenticators 3.22
491 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
492 server_password string unset gsasl 4.80
493 server_prompts string* unset plaintext 3.10
494 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
495 server_scram_iter string* unset gsasl 4.80
496 server_scram_salt string* unset gsasl 4.80
497 server_secret string* unset cram_md5 3.10
498 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
499 server_set_id string* unset authenticators 3.10
500 shadow_condition string* unset transports
501 shadow_transport string unset transports
502 size_addition integer 1024 smtp 1.91
503 skip_syntax_errors boolean false redirect 4.00
504 smtp_accept_keepalive boolean true main
505 smtp_accept_max integer 20 main
506 smtp_accept_max_nonmail integer 10 main 4.11
507 smtp_accept_max_nonmail_hosts host list * main 4.14
508 smtp_accept_max_per_connection integer 1000 main 4.00
509 smtp_accept_max_per_host integer 0 main 2.05
510 smtp_accept_queue integer 0 main
511 smtp_accept_queue_per_connection integer 10 main 2.03
512 smtp_accept_reserve integer 0 main
513 smtp_active_hostname string* unset main 4.33
514 smtp_banner string* + main
515 smtp_check_spool_space boolean true main 2.10
516 smtp_connect_backlog integer 5 main
517 smtp_enforce_sync boolean true main 4.00
518 smtp_etrn_command string* unset main 1.92
519 smtp_etrn_serialize boolean true main 1.89
520 smtp_load_reserve fixed-point unset main
521 smtp_max_synprot_errors integer 3 main 4.30
522 smtp_max_unknown_commands integer 3 main 4.14
523 smtp_ratelimit_hosts host list unset main 4.00
524 smtp_ratelimit_mail string unset main 4.00
525 smtp_ratelimit_rcpt string unset main 4.00
526 smtp_receive_timeout time 5m main
527 smtp_reserve_hosts host list unset main
528 smtp_return_error_details boolean false main 4.11
529 socket string* unset lmtp 4.11
530 spamd_address string* + main 4.50 with content scan
531 split_spool_directory boolean false main 1.70
532 spool_directory string ++ main
533 spool_wireformat boolean false main 4.90
534 sqlite_lock_timeout time 5s main 4.53
535 strict_acl_vars boolean false main 4.64
536 srv_fail_domains domain list unset dnslookup 4.43
537 strip_excess_angle_brackets boolean false main
538 strip_trailing_dot boolean false main
539 subject string* unset autoreply
540 syntax_errors_text string* unset redirect 4.00
541 syntax_errors_to string unset redirect 4.00
542 syslog_duplication boolean true main 4.21
543 syslog_facility string unset main 4.20
544 syslog_processname string "exim" main 4.20
545 syslog_timestamp boolean true main 4.00
546 system_filter string unset main 4.00 replacing message_filter
547 system_filter_directory_transport string unset main 4.00 replacing message_filter
548 system_filter_file_transport string unset main 4.00 replacing message_filter
549 system_filter_group string unset main 4.00 replacing message_filter
550 system_filter_pipe_transport string unset main 4.00 replacing message_filter
551 system_filter_reply_transport string unset main 4.00 replacing message_filter
552 system_filter_user string unset main 4.00 replacing message_filter
553 tcp_nodelay boolean true main 4.23
555 tcp_wrappers_daemon_name string* ++ main 4.73
556 temp_errors string list + pipe 1.95
557 text string* unset autoreply
558 timeout time 5m lmtp 3.20
562 timeout_defer boolean false pipe 4.51
563 timeout_frozen_after time 0s main 3.20
564 timezone string + main 3.15
565 tls_advertise_hosts host list * main 3.20
566 tls_certificate string* unset main 3.20
568 tls_dh_max_bits integer 2236 main 4.80
569 tls_dh_min_bits integer 1024 smtp 4.82
570 tls_dhparam string* unset main 3.20
571 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
572 tls_on_connect_ports string unset main 4.43
573 tls_privatekey string* unset main 3.20
575 tls_remember_emstp boolean false main 4.21
576 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
577 string* unset main 4.33
578 tls_sni string* unset main 4.80
579 tls_tempfail_tryclear boolean true smtp 4.05
580 tls_try_verify_hosts host list unset main 4.00
581 tls_verify_certificates string* unset main 3.20
583 tls_verify_hosts host list unset main 3.20
584 to string* unset autoreply
585 translate_ip_address string unset routers 4.00
586 transport string* unset routers 4.00
587 transport_current_directory string unset routers 4.00
588 transport_home_directory string unset routers 4.00
589 transport_filter string unset transports
590 transport_filter_timeout time 5m transports 4.30
591 trusted_groups string list unset main
592 trusted_users string list unset main
593 umask octal-integer 022 pipe
594 unknown_login string unset main
595 unknown_username string unset main
596 unseen boolean false routers 4.00
597 untrusted_set_sender boolean false main 3.20
598 use_bsmtp boolean false appendfile 4.00
600 use_crlf boolean false appendfile 1.89
602 use_fcntl_lock boolean + appendfile 1.70
603 use_flock_lock boolean + appendfile 4.11
604 use_lockfile boolean + appendfile
605 use_mbx_lock boolean + appendfile 2.10
606 use_shell boolean false pipe 1.70
607 user string + routers 4.00
608 unset transports 4.00 replaces individual options
609 uucp_from_pattern string + main 1.75
610 uucp_from_sender string* "$1" main 1.75
611 verify boolean true routers 4.00
612 verify_only boolean false routers 4.00
613 verify_recipient boolean true routers 4.00
614 verify_sender boolean true routers 4.00
615 warn_message_file string unset main 4.00
616 widen_domains string list unset dnslookup 4.00
617 write_rejectlog boolean true main 4.31
621 2. COMMAND LINE OPTIONS
622 -----------------------
624 The table below contains a complete list of all Exim's command line options.
625 Those marked with # are available only to trusted users, those marked with +
626 are available only to admin users, and those marked with * exist only to
627 provide compatibility with Sendmail.
630 --help Give a little help (not a lot)
631 --version Give version information (alias for -bV)
634 -bdf + Start daemon and run it in the foreground
635 -be Test string expansion
636 -bem Test string expansion, read test message first
637 -bF Test system filter file
638 -bf Test user filter file
639 -bfd Set domain for filter testing
640 -bfl Set local part for filter testing
641 -bfp Set local part prefix for filter testing
642 -bfs Set local part suffix for filter testing
643 -bh Test incoming SMTP call, omitting callouts
644 -bhc Test incoming SMTP call, with callouts
645 -bi * Run <command>bi_command</command>
646 -bI:help Show list of accepted -bI:<tag> options
647 -bm Accept message on standard input
648 -bmalware + Invoke configured malware scanning against supplied filename
649 -bnq Don't qualify addresses in locally submitted messages
650 -bP Show configuration option settings
652 -bpa + ... with generated addresses as well
653 -bpc + ... but just show a count of messages
654 -bpr + ... do not sort
655 -bpra + ... with generated addresses, unsorted
656 -bpru + ... only undelivered addresses, unsorted
657 -bpu + ... only undelivered addresses
658 -brt Test retry rules
659 -brw Test rewriting rules
660 -bS Read batch SMTP on standard input
661 -bs Run SMTP on standard input and output
662 -bt Test address directing and routing
663 -bV Verify version number
664 -bv Test recipient address verification
665 -bvs Test sender address verification
666 -bw + Inetd wait mode
667 -C + Use alternate configuration file
668 -D + Define macro for configuration file
669 -d + Turn on debugging output
670 -dd + Ditto, but if a daemon, not for subprocesses
671 -dropcr Remove CR character in input: became a no-op in 4.21
673 -ex * Synonym for -oex (for several different x)
674 -F Set calling user name
675 -f # Set calling user address
678 -i Dot does not terminate message
679 -M + Force deliver specific message
680 -Mar + Add recipient to message
681 -MC Internal use only
682 -MCA Internal use only
683 -MCP Internal use only
684 -MCQ Internal use only
685 -MCS Internal use only
686 -MCT Internal use only
687 -Mc + Deliver specific message
688 -Mes + Edit message sender
689 -Mf + Freeze message(s)
690 -Mg + Give up (bounce) message(s)
691 -Mmad + Mark all recipients delivered
692 -Mmd + Mark one recipient delivered
693 -Mrm + Remove message(s) (no bounce)
694 -Mset + Load message's variables when testing with -be
695 -Mt + Thaw message(s)
696 -Mvb + View message body
697 -Mvc + View entire message in RFC 2822 format
698 -Mvh + View message header
699 -Mvl + View message log
701 -N + Deliver without transporting
704 -oA * Supply argument for <option>-bi</option>
705 -oB Set max messages down one connection
706 -odb Background delivery
707 -odf Foreground delivery
708 -odi Foreground delivery
709 -odq Queue message; do not deliver
710 -odqs ... do not do SMTP deliveries
711 -oee Error sent by mail; zero return code
712 -oem Error sent by mail; non-zero return code
713 -oep Error written to standard error stream
714 -oeq * Error written to standard error stream
715 -oew * Error sent by mail; non-zero return code
716 -oi Dot does not terminate message
717 -oitrue * Dot does not terminate message
718 -oMa # Supply host address
719 -oMaa # Supply authenticator name
720 -oMai # Supply authenticated id
721 -oMas # Supply authenticated sender
722 -oMi # Supply interface address
723 -oMm # Supply message reference
724 -oMr # Supply protocol name
725 -oMs # Supply host name
726 -oMt # Supply ident string
729 -oP * Specify path for daemon's pid file
730 -or Timeout non-SMTP messages
731 -os Timeout for SMTP messages
732 -ov * Verbose; same as -v
733 -oX Alternative port for daemon
734 -pd Delay Perl interpreter start
735 -ps Do not delay Perl interpreter start
736 -p<r>:<s> * Same as -oMr <r> -oMs <s>
738 -qf + ... force delivery ) Other combinations are
739 -qff + ... and include frozen messages ) possible. The syntax is
740 -qi + ... initial deliveries only )
741 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
742 -qq + Two-stage queue run )
745 -R Select by recipient in queue run
747 -Rff ... and frozen messages
748 -Rr ... using regular expression
749 -Rrf ... with forcing
750 -Rrff ... and frozen messages
752 -S Select by sender in queue run
754 -Sff ... and frozen messages
755 -Sr ... using regular expression
756 -Srf ... with forcing
757 -Srff ... and frozen messages
758 -Tqt * Used by Exim test suite; not recognized in normal use
759 -t Take recipients from header lines
761 -tls-on-connect Do TLS on startup (for legacy clients)
763 -v Verbose - shows SMTP dialogue and other delivery info
764 -x Ignored (AIX compatibility)
767 3. BUILD TIME OPTIONS FOR EXIM
768 ------------------------------
770 The table below contains a "mostly" complete list of options that can be
771 set in Local/Makefile when building Exim. The only items not included are
772 those whose names can be trivially derived from rules stated below.
774 More information about individual options can be found in src/EDITME and
777 The second column below gives the type of option:
779 . `system' means the option is concerned with the operating system;
781 . `driver' means the option selects a driver to be included in the binary;
783 . `lookup' means the option selects a lookuptype to be included in the binary;
785 . `mandatory' means the option is required to be supplied;
787 . `recommended' means the option is recommended to be supplied;
789 . `optional' means what it says;
791 Those marked with * are specialized and are unlikely to be required in most
792 installations. Those that are marked with ** are commonly set in OS-specific
793 Makefiles. If you use any of these in your Local/Makefile, you may need to
794 reproduce some of the OS-specific settings. For example, in the Makefile for
795 Solaris (which is actually called OS/Makefile-SunOS5), there is
797 LIBS=-lsocket -lnsl -lkstat
799 If you use LIBS to add extra libraries, you must also include the OS ones in
800 your setting. It is better, in this particular case, to use EXTRALIBS, which is
801 empty by default, and is provided for just this reason. Of course, if you do
802 actually want to modify a setting from the OS-specific file, there is nothing
803 to stop you overriding it in your Local/Makefile.
805 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
806 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
807 libraries specific only to that module. These rules are only used where the
808 relevant lookup is a module. These options are not explicitly listed below.
810 Variables with names endined `_PC' are used for pkg-config integration; setting
811 the value to the name of a pkg-config package will cause Exim's build system to
812 query the --cflags and --libs for the given name, when building anything
813 dependent upon the component associated with the `_PC' variable. For lookups,
814 if the lookup is dynamically loaded, then this *replaces* the use of the
815 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
816 is statically loaded into Exim, the results will be inserted into the
817 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
818 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
819 only listed below for the TLS implementation cases.
822 Option Type Description
823 ------------------------------------------------------------------------------
825 ALT_CONFIG_PREFIX optional restricts location of -C files
826 APPENDFILE_MODE optional*
827 APPENDFILE_DIRECTORY_MODE optional*
828 APPENDFILE_LOCKFILE_MODE optional*
829 AR system command to build a library
830 AUTH_CRAM_MD5 driver include cram_md5 authenticator
831 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
832 AUTH_GSASL driver include GNU SASL authenticator
833 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
834 AUTH_LIBS system library linkage for authenticators
835 AUTH_PLAINTEXT driver include plaintext authenticator
836 AUTH_SPA driver include SPA (NTLM) authenticator
837 AUTH_VARS=3 optional* number of $auth variables
838 BASENAME_COMMAND system** path to basename
839 BASE_62=62 optional* not normally changed for Unix
840 BIN_DIRECTORY mandatory Exim binary directory
841 CC system** C compiler
842 CFLAGS system** flags for C compiler
843 CFLAGS_DYNAMIC system** extra flags needed for .so modules
844 CHGRP_COMMAND system** path to chgrp
845 CHOWN_COMMAND system** path to chown
846 COMPRESS_COMMAND system path to a compress command
847 COMPRESS_SUFFIX system suffix added to compressed files
848 CONFIGURE_FILE mandatory Exim runtime configuration file
849 CONFIGURE_FILE_USE_EUID optional*
850 CONFIGURE_FILE_USE_NODE optional*
851 CONFIGURE_GROUP optional* alternate group for configuration file
852 CONFIGURE_OWNER optional* alternate owner for configuration file
853 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
854 DBMLIB optional** location of DBM library
855 DB_DIRECTORY_MODE optional* mode for hints directory
856 DB_LOCKFILE_MODE optional* mode for hints lock files
857 DB_LOCK_TIMEOUT optional* timeout for hints lock files
858 DB_MODE optional* mode for hints files
859 DEFAULT_CRYPT optional default crypt() function
860 DELIVER_IN_BUFFER_SIZE optional*
861 DELIVER_OUT_BUFFER_SIZE optional*
862 DISABLE_DKIM optional disables DKIM support
863 DISABLE_DNSSEC optional disables attempts to use DNSSEC
864 DISABLE_D_OPTION optional disables -D option
865 ERRNO_QUOTA optional* error code for system quota failures
866 EXICYCLOG_MAX optional number of old log files to keep
867 EXIMDB_DIRECTORY_MODE optional* for hints database directory
868 EXIMDB_LOCKFILE_MODE optional* for hints lock files
869 EXIMDB_MODE optional* mode for hints files
870 EXIMON_TEXTPOP system**
872 EXIM_GROUP mandatory group to use for Exim
873 EXIM_MONITOR optional set to eximon.bin to compile
875 EXIM_USER mandatory user to use for Exim
876 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
877 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
878 EXIWHAT_MULTIKILL_CMD system**
879 EXIWHAT_MULTIKILL_ARG system**
880 EXIWHAT_PS_ARG system** to list all processes
881 EXIWHAT_PS_CMD system** path to ps command
882 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
883 EXTRALIBS system additional libraries
884 EXTRALIBS_EXIM system additional libraries for Exim only
885 EXTRALIBS_EXIMON system additional libraries for the monitor
886 FIXED_NEVER_USERS optional can't override at runtime
887 HAVE_ICONV system the iconv() function is available
888 HAVE_IPV6 system include IPv6 support
889 HEADERS_CHARSET optional charset for decoded header lines
890 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
891 HEADER_MAXSIZE optional* max memory for message header
892 HOSTNAME_COMMAND system** path to hostname command
893 INCLUDE system path to include files
894 INFO_DIRECTORY optional directory for Info documentation
895 INPUT_DIRECTORY_MODE optional mode for input directory
896 IPV6_INCLUDE system additional includes for IPv6
897 IPV6_LIBS system additional libraries for IPv6
898 LDAP_LIB_TYPE optional type of LDAP library
899 LFLAGS system** link editor flags
900 LIBIDENTCFLAGS system C flags when compiling libident
901 LIBIDENTNAME system name for libident library
902 LIBRESOLV system** library for DNS resolver
903 LIBS system** additional libraries
904 LIBS_EXIM system** additional libraries for Exim ony
905 LIBS_EXIMON system** additional libraries for monitor
906 LOCAL_SCAN_SOURCE optional location of local_scan() source
907 LOG_DIRECTORY_MODE optional mode for log directory
908 LOG_FILE_PATH optional path to log files
909 LOG_MODE optional mode for log files
910 LOOKUP_CDB lookup include cdb lookup
911 LOOKUP_DBM lookup include dbm lookup
912 LOOKUP_DNSDB lookup include dnsdb lookup
913 LOOKUP_DSEARCH lookup include dsearch lookup
914 LOOKUP_INCLUDE lookup include files for lookups
915 LOOKUP_LDAP lookup include ldap lookup
916 LOOKUP_LIBS lookup include libraries for lookups
917 LOOKUP_LSEARCH lookup include all lsearch lookups
918 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
919 LOOKUP_MYSQL lookup include mysql lookup
920 LOOKUP_NIS lookup include nis lookup
921 LOOKUP_NISPLUS lookup include nisplus lookup
922 LOOKUP_ORACLE lookup include oracle lookup
923 LOOKUP_PGSQL lookup include pgsql lookup
924 LOOKUP_TESTDB lookup*
925 LOOKUP_WHOSON lookup include whoson lookup
926 LOOKUP_*_INCLUDE optional* include files for dynamic module
927 LOOKUP_*_LIBS optional* libraries for dynamic module
928 MAKE_SHELL optional* shell to use for make
929 MAX_FILTER_SIZE optional* max file size for filter files
930 MAX_INCLUDE_SIZE optional* max file size for :include: files
931 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
932 MAX_NAMED_LIST optional* max named lists of a given type
933 MAX_INTERFACES system maximum network interfaces
934 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
935 MV_COMMAND system path to mv command
936 NO_SYMLINK optional install doesn't make 'exim" symlink
937 PCRE_CONFIG system* use pcre-config for PCRE support
938 PCRE_LIBS system* library for using PCRE
939 PERL_CC system* compiler for Perl interface code
940 PERL_CCOPTS system* flags for same
941 PERL_COMMAND system path to Perl
942 PERL_LIBS system* library for compiling Perl interface
943 PID_FILE_PATH optional path to daemon's pid file
944 RADIUS_CONFIG_FILE optional path to Radius config file
945 RADIUS_LIB_TYPE optional type of RADIUS library
946 RANLIB system** path to ranlib command
947 RM_COMMAND system path to rm command
948 ROUTER_ACCEPT driver include accept router
949 ROUTER_DNSLOOKUP driver include dnslookup router
950 ROUTER_MANUALROUTE driver include manualroute router
951 ROUTER_IPLITERAL driver include ipliteral router
952 ROUTER_IPLOOKUP driver include iplookup router
953 ROUTER_REDIRECT driver include redirect router
954 ROUTER_QUERYPROGRAM driver include queryprogram router
955 SPOOL_DIRECTORY recommended path to spool directory
956 SPOOL_DIRECTORY_MODE optional mode of spool directory
957 SPOOL_MODE optional mode of spool files
958 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
959 STRIP_COMMAND optional* can be used to strp binaries
960 SUPPORT_A6 optional* support A6 DNS records
961 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
962 SUPPORT_MAILDIR optional support for maildir delivery
963 SUPPORT_MAILSTORE optional support for mailstore delivery
964 SUPPORT_MBX optional support for MBX delivery
965 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
966 SUPPORT_PAM optional support for PAM authentication
967 SUPPORT_TLS optional support for TLS encryption over SMTP
968 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
969 SYSLOG_LOG_PID optional add pid to syslog lines
970 SYSLOG_LONG_LINES optional do not split long syslog lines
971 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
972 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
973 TIMEZONE_DEFAULT optional default for timezone option
974 TLS_INCLUDE optional path to include files for TLS
975 TLS_LIBS optional additional libraries for TLS
976 EXIM_TMPDIR system value for TMPDIR environment variable
977 TRANSPORT_APPENDFILE driver include appendfile transport
978 TRANSPORT_AUTOREPLY driver include autoreply transport
979 TRANSPORT_LMTP driver include lmtp transport
980 TRANSPORT_PIPE driver include pipe transport
981 TRANSPORT_SMTP driver include smtp transport
982 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
983 USE_DB system** use native DB interface
984 USE_GNUTLS optional use GnuTLS instead of OpenSSL
985 USE_GNUTLS_PC optional probably "gnutls"
986 USE_OPENSSL_PC optional probably "openssl"
987 USE_READLINE optional try to load libreadline for -be
988 USE_TCP_WRAPPERS system link with tcpwrappers
989 USE_TDB optional use the tdb DB interface
990 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
991 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
992 X11 system** X11 base directory
993 X11_LD_LIB system** X11 link library
994 XINCLUDE system** X11 include directory
995 XLFLAGS system** X11 link time flags
996 ZCAT_COMMAND system path to zcat command
999 4. BUILD TIME OPTIONS FOR EXIMON
1000 --------------------------------
1002 The table below contains a complete list of options that can be set in
1003 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1004 ** it means that the text string is too long to fit in the table and is instead
1005 given below. A blank default means that there is no default value.
1007 ACTION_OUTPUT=no show output for every action
1008 ACTION_QUEUE_UPDATE=yes update queue display after actions
1009 BODY_MAX=20000 maximum body display
1010 DOMAIN= domain to strip from window title
1011 LOG_BUFFER=20K buffer for log tail
1012 LOG_DEPTH=300 depth of log subwindow
1013 LOG_FONT=** font for log display
1014 LOG_STRIPCHARTS=** patterns for stripcharts
1015 LOG_WIDTH=950 width of log subwindow
1016 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1017 MIN_HEIGHT=162 minimum window height
1018 MIN_WIDTH=103 minimum window width
1019 QUALIFY_DOMAIN= local domain to strip from addresses
1020 QUEUE_DEPTH=200 depth of queue subwindow
1021 QUEUE_FONT=$LOG_FONT font for queue display
1022 QUEUE_INTERVAL=300 queue refresh interval
1023 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1024 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1025 QUEUE_WIDTH=950 width of queue subwindow
1026 SIZE_STRIPCHART= request partition size stripchart
1027 SIZE_STRIPCHART_NAME=space name for size stripchart
1028 START_SMALL=no if yes, start with small window
1029 STRIPCHART_INTERVAL=60 stripchart refresh interval
1030 TEXT_DEPTH=200 depth of text windows
1031 WINDOW_TITLE="${hostname} eximon" window title
1033 The default for LOG_FONT is
1035 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1037 and the default for LOG_STRIPCHARTS is
1039 LOG_STRIPCHARTS='/ <= /in/
1041 / => .+ R=local/local/
1042 / => .+ T=[^ ]*smtp/smtp/'
1044 That is, there are four stripcharts, named in, out, local, and smtp. The first
1045 counts message arrivals, the second counts all deliveries, the third counts
1046 deliveries where the router's name starts with "local", and the fourth counts
1047 deliveries where the transport name contains "smtp".
1049 **** End of OptionLists ****
git://git.exim.org / exim.git / blob