src/OS/Makefile-Base

   1 # This file is the basis of the main makefile for Exim and friends. The
   2 # makefile at the top level arranges to build the main makefile by calling
   3 # scripts/Configure-Makefile from within the build directory. This
   4 # concatenates the configuration settings from Local/Makefile and other,
   5 # optional, Local/* files at the front of this file, to create Makefile in the
   6 # build directory.
   7 #
   8 # Copyright (c) The Exim Maintainers 1995 - 2024
   9 # SPDX-License-Identifier: GPL-2.0-or-later
  10
  11 SHELL      = $(MAKE_SHELL)
  12 SCRIPTS    = ../scripts
  13 O          = ../OS
  14 EDITME     = ../Local/Makefile
  15 EXIMON_EDITME = ../Local/eximon.conf
  16
  17 # The compiler used for linking is normally the same as the compiler used for
  18 # compiling. However, by giving it a different name, we can override it from
  19 # the command line, and this is helpful for certain types of testing.
  20
  21 LNCC = $(CC)
  22
  23 # The compile commands can be very long. To make the output look better,
  24 # they are not normally echoed in full. To get full echoing, the caller
  25 # must set FULLECHO='' on the command line and call make with -e. We default
  26 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
  27
  28 FULLECHO = @
  29 FE       = $(FULLECHO)
  30
  31 # The default target double-checks the existence of $(EDITME) and then arranges
  32 # to touch it if it exists and any of the optional configuration files, which
  33 # depend on the os or the architecture, have been altered. The same sub-target
  34 # does the same thing for the eximon configuration file if it exists. Then
  35 # there is a check that the Makefile (the one built from this file) is
  36 # up-to-date. Then the os-specific source files and the C configuration file
  37 # are set up, and finally it goes to the main Exim target.
  38
  39 all:       utils exim dynmodules
  40 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h version.sh macro.c
  41
  42 exim_openssl exim_gnutls: clean exim
  43         cp exim $@
  44
  45 checklocalmake:
  46         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
  47           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
  48           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
  49         then \
  50           touch $(EDITME); \
  51         fi
  52         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
  53           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
  54           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
  55         then \
  56           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
  57         fi
  58
  59 $(EDITME):
  60         @echo " "
  61         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
  62         @echo "*** appropriate changes for your site."
  63         @echo " "
  64         @false
  65
  66 $(EXIMON_EDITME):
  67         @echo " "
  68         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
  69         @echo "*** appropriate changes for your site."
  70         @echo " "
  71         @test ! -d ../Local && mkdir ../Local
  72         @false
  73
  74 # Check that the local Makefile is up-to-date
  75
  76 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
  77           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
  78         @echo " "
  79         @echo "*** Makefile needs rebuilding"
  80         @echo "*** Please run \"make makefile\" at top level"
  81         @echo " "
  82         @false
  83
  84 # Build (link) the os.h file
  85
  86 os.h:   $(SCRIPTS)/Configure-os.h \
  87         $(O)/os.h-FreeBSD       \
  88         $(O)/os.h-GNU           \
  89         $(O)/os.h-Linux         \
  90         $(O)/os.h-OpenBSD       \
  91         $(O)/os.h-SunOS5
  92         $(SHELL) $(SCRIPTS)/Configure-os.h
  93
  94 # Build the os.c file
  95
  96 os.c:   ../src/os.c \
  97         $(SCRIPTS)/Configure-os.c \
  98         $(O)/os.c-FreeBSD       \
  99         $(O)/os.c-GNU           \
 100         $(O)/os.c-Linux         \
 101         $(O)/os.c-SunOS5
 102         $(SHELL) $(SCRIPTS)/Configure-os.c
 103
 104 # Build the config.h file.
 105
 106 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 107         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
 108
 109 # Build the builtin-macros data struct
 110
 111 MACRO_HSRC = macro_predef.h os.h globals.h config.h macros.h path_max.h \
 112         routers/accept.h routers/dnslookup.h routers/ipliteral.h \
 113         routers/iplookup.h routers/manualroute.h routers/queryprogram.h \
 114         routers/redirect.h
 115
 116 OBJ_MACRO = macro_predef.o \
 117         macro-globals.o macro-readconf.o macro-expand.o macro-route.o \
 118         macro-transport.o macro-drtables.o macro-acl.o macro-tls.o \
 119         macro-appendfile.o macro-autoreply.o macro-lmtp.o macro-pipe.o macro-queuefile.o \
 120         macro-smtp.o macro-accept.o macro-dnslookup.o macro-ipliteral.o macro-iplookup.o \
 121         macro-manualroute.o macro-queryprogram.o macro-redirect.o \
 122         macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl.o \
 123         macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-authtls.o macro-external.o \
 124         macro-dkim.o macro-malware.o macro-signing.o
 125
 126 $(OBJ_MACRO):   $(MACRO_HSRC)
 127
 128 macro_predef.o :        macro_predef.c
 129         @echo "$(CC) -DMACRO_PREDEF macro_predef.c"
 130         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ macro_predef.c
 131 macro-globals.o :       globals.c
 132         @echo "$(CC) -DMACRO_PREDEF globals.c"
 133         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ globals.c
 134 macro-readconf.o :      readconf.c
 135         @echo "$(CC) -DMACRO_PREDEF readconf.c"
 136         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ readconf.c
 137 macro-expand.o :        expand.c
 138         @echo "$(CC) -DMACRO_PREDEF expand.c"
 139         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ expand.c
 140 macro-route.o :         route.c
 141         @echo "$(CC) -DMACRO_PREDEF route.c"
 142         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ route.c
 143 macro-transport.o:      transport.c
 144         @echo "$(CC) -DMACRO_PREDEF transport.c"
 145         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transport.c
 146 macro-drtables.o :      drtables.c
 147         @echo "$(CC) -DMACRO_PREDEF drtables.c"
 148         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ drtables.c
 149 macro-acl.o:    acl.c
 150         @echo "$(CC) -DMACRO_PREDEF acl.c"
 151         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ acl.c
 152 macro-tls.o:    tls.c tls-gnu.c tls-openssl.c
 153         @echo "$(CC) -DMACRO_PREDEF tls.c"
 154         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ tls.c
 155 macro-appendfile.o :    transports/appendfile.c
 156         @echo "$(CC) -DMACRO_PREDEF transports/appendfile.c"
 157         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/appendfile.c
 158 macro-autoreply.o :     transports/autoreply.c
 159         @echo "$(CC) -DMACRO_PREDEF transports/autoreply.c"
 160         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/autoreply.c
 161 macro-lmtp.o:           transports/lmtp.c
 162         @echo "$(CC) -DMACRO_PREDEF transports/lmtp.c"
 163         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/lmtp.c
 164 macro-pipe.o :          transports/pipe.c
 165         @echo "$(CC) -DMACRO_PREDEF transports/pipe.c"
 166         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/pipe.c
 167 macro-queuefile.o :     transports/queuefile.c
 168         @echo "$(CC) -DMACRO_PREDEF transports/queuefile.c"
 169         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/queuefile.c
 170 macro-smtp.o :          transports/smtp.c
 171         @echo "$(CC) -DMACRO_PREDEF transports/smtp.c"
 172         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/smtp.c
 173 macro-accept.o :        routers/accept.c
 174         @echo "$(CC) -DMACRO_PREDEF routers/accept.c"
 175         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/accept.c
 176 macro-dnslookup.o :     routers/dnslookup.c
 177         @echo "$(CC) -DMACRO_PREDEF routers/dnslookup.c"
 178         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/dnslookup.c
 179 macro-ipliteral.o :     routers/ipliteral.c
 180         @echo "$(CC) -DMACRO_PREDEF routers/ipliteral.c"
 181         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/ipliteral.c
 182 macro-iplookup.o :      routers/iplookup.c
 183         @echo "$(CC) -DMACRO_PREDEF routers/iplookup.c"
 184         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/iplookup.c
 185 macro-manualroute.o :   routers/manualroute.c
 186         @echo "$(CC) -DMACRO_PREDEF routers/manualroute.c"
 187         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/manualroute.c
 188 macro-queryprogram.o :  routers/queryprogram.c
 189         @echo "$(CC) -DMACRO_PREDEF routers/queryprogram.c"
 190         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/queryprogram.c
 191 macro-redirect.o :      routers/redirect.c
 192         @echo "$(CC) -DMACRO_PREDEF routers/redirect.c"
 193         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/redirect.c
 194 macro-auth-spa.o :      auths/auth-spa.c
 195         @echo "$(CC) -DMACRO_PREDEF auths/auth-spa.c"
 196         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/auth-spa.c
 197 macro-cram_md5.o :      auths/cram_md5.c
 198         @echo "$(CC) -DMACRO_PREDEF auths/cram_md5.c"
 199         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cram_md5.c
 200 macro-cyrus_sasl.o :    auths/cyrus_sasl.c
 201         @echo "$(CC) -DMACRO_PREDEF auths/cyrus_sasl.c"
 202         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cyrus_sasl.c
 203 macro-dovecot.o:        auths/dovecot.c
 204         @echo "$(CC) -DMACRO_PREDEF auths/dovecot.c"
 205         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/dovecot.c
 206 macro-external.o:       auths/external.c
 207         @echo "$(CC) -DMACRO_PREDEF auths/external.c"
 208         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/external.c
 209 macro-gsasl.o : auths/gsasl.c
 210         @echo "$(CC) -DMACRO_PREDEF auths/gsasl.c"
 211         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/gsasl.c
 212 macro-heimdal_gssapi.o: auths/heimdal_gssapi.c
 213         @echo "$(CC) -DMACRO_PREDEF auths/heimdal_gssapi.c"
 214         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/heimdal_gssapi.c
 215 macro-plaintext.o :     auths/plaintext.c
 216         @echo "$(CC) -DMACRO_PREDEF auths/plaintext.c"
 217         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/plaintext.c
 218 macro-spa.o :           auths/spa.c
 219         @echo "$(CC) -DMACRO_PREDEF auths/spa.c"
 220         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/spa.c
 221 macro-authtls.o:        auths/tls.c
 222         @echo "$(CC) -DMACRO_PREDEF auths/tls.c"
 223         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/tls.c
 224 macro-dkim.o:           dkim.c
 225         @echo "$(CC) -DMACRO_PREDEF dkim.c"
 226         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ dkim.c
 227 macro-malware.o:        malware.c
 228         @echo "$(CC) -DMACRO_PREDEF malware.c"
 229         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ malware.c
 230 macro-signing.o:        pdkim/signing.c
 231         @echo "$(CC) -DMACRO_PREDEF pdkim/signing.c"
 232         $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ pdkim/signing.c
 233
 234 macro_predef: $(OBJ_MACRO)
 235         @echo "$(LNCC) -o $@"
 236         $(FE)$(LNCC) -o $@ $(LFLAGS) $(OBJ_MACRO)
 237
 238 macro.c: macro_predef
 239         ./macro_predef > macro.c
 240
 241 # This target is recognized specially by GNU make. It records those targets
 242 # that do not correspond to files that are being built and which should
 243 # therefore always be run, even if the files exist. This shouldn't in fact be a
 244 # problem, but it does no harm. Other make programs will just ignore this.
 245
 246 .PHONY: all config utils \
 247         buildauths buildlookups buildpdkim buildrouters \
 248         buildtransports buildmisc dynmodules checklocalmake clean
 249
 250
 251 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
 252         exigrep eximstats exipick exiqgrep exiqsumm \
 253         transport-filter.pl exim_checkaccess \
 254         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb \
 255         exim_lock exim_msgdate exim_id_update
 256
 257
 258 # Targets for special-purpose configuration header builders
 259 buildconfig: buildconfig.c
 260         @echo "$(CC) buildconfig.c"
 261         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
 262
 263
 264 # Target for the exicyclog utility script
 265 exicyclog: config ../src/exicyclog.src
 266         @rm -f exicyclog
 267         @. ./version.sh && sed \
 268           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 269           -e "/^# /p" \
 270           -e "/^# /d" \
 271           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 272           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
 273           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 274           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 275           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
 276           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
 277           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 278           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
 279           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
 280           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
 281           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
 282           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 283           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
 284           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 285           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 286           ../src/exicyclog.src > exicyclog-t
 287         @mv exicyclog-t exicyclog
 288         @chmod a+x exicyclog
 289         @./exicyclog -v 2>&1 >/dev/null
 290         @echo ">>> exicyclog script built"
 291
 292 # Target for the exinext utility script
 293 exinext: config ../src/exinext.src
 294         @rm -f exinext
 295         @. ./version.sh && sed \
 296           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 297           -e "/^# /p" \
 298           -e "/^# /d" \
 299           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 300           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 301           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 302           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 303           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 304           ../src/exinext.src > exinext-t
 305         @mv exinext-t exinext
 306         @chmod a+x exinext
 307         @./exinext -v 2>&1 >/dev/null
 308         @echo ">>> exinext script built"
 309
 310 # Target for the exiwhat utility script
 311 exiwhat: config ../src/exiwhat.src
 312         @rm -f exiwhat
 313         @. ./version.sh && sed \
 314           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 315           -e "/^# /p" \
 316           -e "/^# /d" \
 317           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 318           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 319           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 320           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
 321           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
 322           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
 323           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
 324           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
 325           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
 326           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 327           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 328           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
 329           ../src/exiwhat.src > exiwhat-t
 330         @mv exiwhat-t exiwhat
 331         @chmod a+x exiwhat
 332         @./exiwhat -v 2>&1 >/dev/null
 333         @echo ">>> exiwhat script built"
 334
 335 # Target for the exim_checkaccess utility script
 336 exim_checkaccess: config ../src/exim_checkaccess.src
 337         @rm -f exim_checkaccess
 338         @. ./version.sh && sed \
 339           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 340           -e "/^# /p" \
 341           -e "/^# /d" \
 342           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 343           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 344           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 345           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 346           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 347           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 348           ../src/exim_checkaccess.src > exim_checkaccess-t
 349         @mv exim_checkaccess-t exim_checkaccess
 350         @chmod a+x exim_checkaccess
 351         # @./exim_checkaccess -v 2>&1 >/dev/null
 352         @echo ">>> exim_checkaccess script built"; echo ""
 353
 354 # Target for the Exim monitor start-up script
 355 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
 356           ../Local/eximon.conf
 357         @rm -f eximon
 358         $(SHELL) $(SCRIPTS)/Configure-eximon
 359         @. ./version.sh && sed \
 360           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 361           -e "/^# /p" \
 362           -e "/^# /d" \
 363           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
 364           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
 365           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 366           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
 367           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
 368           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
 369           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 370           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 371           ../src/eximon.src >> eximon
 372         @./eximon -v 2>&1 >/dev/null
 373         @echo ">>> eximon script built"; echo ""
 374
 375 # Targets for utilities; these are all Perl scripts that have to get the
 376 # location of Perl put in them. A few need other things as well.
 377
 378 exigrep: config ../src/exigrep.src
 379         @rm -f exigrep
 380         @. ./version.sh && sed \
 381           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 382           -e "/^# /p" \
 383           -e "/^# /d" \
 384           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 385           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
 386           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
 387           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 388           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 389           ../src/exigrep.src > exigrep-t
 390         @mv exigrep-t exigrep
 391         @chmod a+x exigrep
 392         @./exigrep --version 2>&1 >/dev/null
 393         @echo ">>> exigrep script built"
 394
 395 exim_msgdate: config ../src/exim_msgdate.src
 396         @rm -f exim_msgdate
 397         @. ./version.sh && sed \
 398           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 399           -e "/^[ \t]*# /p" \
 400           -e "/^[ \t]*# /d" \
 401           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 402           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 403           -e "s?BASE_62?$${BASE_62:-62}?" \
 404           -e "s?CONFIGURE_FILE\"?$(CONFIGURE_FILE)\"?" \
 405           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 406           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 407           ../src/exim_msgdate.src > exim_msgdate-t
 408         @mv exim_msgdate-t exim_msgdate
 409         @chmod a+x exim_msgdate
 410         @./exim_msgdate -v 2>&1 >/dev/null
 411         @echo ">>> exim_msgdate script built"
 412
 413 eximstats: config ../src/eximstats.src
 414         @rm -f eximstats
 415         @. ./version.sh && sed \
 416           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 417           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 418           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 419           ../src/eximstats.src > eximstats-t
 420         @mv eximstats-t eximstats
 421         @chmod a+x eximstats
 422         @./eximstats -v 2>&1 >/dev/null
 423         @echo ">>> eximstats script built"
 424
 425 exiqgrep: config ../src/exiqgrep.src
 426         @rm -f exiqgrep
 427         @. ./version.sh && sed \
 428           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
 429           -e "/^# /p" \
 430           -e "/^# /d" \
 431           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 432           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 433           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 434           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 435           ../src/exiqgrep.src > exiqgrep-t
 436         @mv exiqgrep-t exiqgrep
 437         @chmod a+x exiqgrep
 438         @./exiqgrep -v 2>&1 >/dev/null
 439         @echo ">>> exiqgrep script built"
 440
 441 exiqsumm: config ../src/exiqsumm.src
 442         @rm -f exiqsumm
 443         @. ./version.sh && sed \
 444           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 445           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 446           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 447           ../src/exiqsumm.src > exiqsumm-t
 448         @mv exiqsumm-t exiqsumm
 449         @chmod a+x exiqsumm
 450         @./exiqsumm -v 2>&1 >/dev/null
 451         @echo ">>> exiqsumm script built"
 452
 453 exipick: config ../src/exipick.src
 454         @rm -f exipick
 455         @. ./version.sh && sed \
 456           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 457           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 458           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 459           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 460           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 461           ../src/exipick.src > exipick-t
 462         @mv exipick-t exipick
 463         @chmod a+x exipick
 464         @./exipick -v 2>&1 >/dev/null
 465         @echo ">>> exipick script built"
 466
 467 exim_id_update: config ../src/exim_id_update.src
 468         @rm -f exim_id_update
 469         @. ./version.sh && sed \
 470           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 471           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
 472           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
 473           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 474           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 475           ../src/exim_id_update.src > exim_id_update-t
 476         @mv exim_id_update-t exim_id_update
 477         @chmod a+x exim_id_update
 478         @./exim_id_update -v 2>&1 >/dev/null
 479         @echo ">>> exim_id_update script built"
 480
 481 transport-filter.pl: config ../src/transport-filter.src
 482         @rm -f transport-filter.pl
 483         @. ./version.sh && sed \
 484           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
 485           -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
 486           -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
 487           ../src/transport-filter.src > transport-filter.pl-t
 488         @mv transport-filter.pl-t transport-filter.pl
 489         @chmod a+x transport-filter.pl
 490         @echo ">>> transport-filter.pl script built"
 491
 492
 493 # These are objects of optional features. They are always compiled, but
 494 # if the corresponding #defines are not set, they wind up empty and
 495 # are thrown away by the linker.
 496
 497 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 498 OBJ_EXPERIMENTAL =      arc.o \
 499                         bmi_spam.o \
 500                         dane.o \
 501                         dcc.o \
 502                         imap_utf7.o \
 503                         utf8.o \
 504                         xclient.o
 505
 506 # Targets for final binaries; the main one has a build number which is
 507 # updated each time. We don't bother with that for the auxiliaries.
 508
 509 OBJ_LOOKUPS = lf_quote.o lf_check_file.o lf_sqlperform.o
 510 OBJ_ROUTERS = rf_change_domain.o rf_expand_data.o rf_get_errors_address.o \
 511         rf_get_munge_headers.o rf_get_transport.o rf_get_ugid.o \
 512         rf_lookup_hostlist.o rf_queue_add.o rf_self_action.o rf_set_ugid.o
 513 OBJ_AUTHS = call_pam.o call_pwcheck.o call_radius.o check_serv_cond.o \
 514         get_data.o get_no64_data.o pwcheck.o
 515
 516 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
 517         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
 518         filtertest.o globals.o dkim.o dkim_transport.o dnsbl.o hash.o \
 519         header.o host.o host_address.o ip.o log.o lss.o match.o md5.o moan.o \
 520         os.o parse.o priv.o proxy.o queue.o \
 521         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o regex_cache.o \
 522         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
 523         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
 524         xtextencode.o environment.o macro.o \
 525         $(OBJ_LOOKUPS) $(OBJ_ROUTERS) $(OBJ_AUTHS) \
 526         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
 527         $(OBJ_EXPERIMENTAL)
 528
 529 exim:   buildlookups buildauths pdkim/pdkim.a \
 530         buildrouters buildtransports buildmisc \
 531         $(OBJ_EXIM) version.o
 532         @echo "$(LNCC) -o exim"
 533         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 534           routers/routers.a transports/transports.a lookups/lookups.a \
 535           auths/auths.a pdkim/pdkim.a miscmods/miscmods.a \
 536           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 537           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 538           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
 539         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 540           echo $(STRIP_COMMAND) exim; \
 541           $(STRIP_COMMAND) exim; \
 542         fi
 543         $(EXIM_CHMOD)
 544         @echo " "
 545         @echo ">>> exim binary built"
 546         @echo " "
 547
 548 # The utility for dumping the contents of an exim database
 549
 550 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o util-xtextencode.o
 551
 552 exim_dumpdb: $(OBJ_DUMPDB)
 553         @echo "$(LNCC) -o exim_dumpdb"
 554         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
 555           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 556         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 557           echo $(STRIP_COMMAND) exim_dumpdb; \
 558           $(STRIP_COMMAND) exim_dumpdb; \
 559         fi
 560         @echo ">>> exim_dumpdb utility built"
 561         @echo " "
 562
 563 # The utility for interrogating/fixing the contents of an exim database
 564
 565 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o util-md5.o util-xtextencode.o
 566
 567 exim_fixdb:  $(OBJ_FIXDB)
 568         @echo "$(LNCC) -o exim_fixdb"
 569         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 570           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 571         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 572           echo $(STRIP_COMMAND) exim_fixdb; \
 573           $(STRIP_COMMAND) exim_fixdb; \
 574         fi
 575         @echo ">>> exim_fixdb utility built"
 576         @echo " "
 577
 578 # The utility for tidying the contents of an exim database
 579
 580 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o util-xtextencode.o
 581
 582 exim_tidydb: $(OBJ_TIDYDB)
 583         @echo "$(LNCC) -o exim_tidydb"
 584         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) \
 585           $(OBJ_TIDYDB) \
 586           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 587         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 588           echo $(STRIP_COMMAND) exim_tidydb; \
 589           $(STRIP_COMMAND) exim_tidydb; \
 590         fi
 591         @echo ">>> exim_tidydb utility built"
 592         @echo " "
 593
 594 # The utility for building dbm files
 595
 596 OBJ_DBMBUILD = exim_dbmbuild.o util-xtextencode.o
 597
 598 exim_dbmbuild: $(OBJ_DBMBUILD)
 599         @echo "$(LNCC) -o exim_dbmbuild"
 600         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dbmbuild $(LFLAGS) \
 601           $(OBJ_DBMBUILD) \
 602           $(LIBS) $(EXTRALIBS) $(DBMLIB)
 603         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 604           echo $(STRIP_COMMAND) exim_dbmbuild; \
 605           $(STRIP_COMMAND) exim_dbmbuild; \
 606         fi
 607         @echo ">>> exim_dbmbuild utility built"
 608         @echo " "
 609
 610 # The utility for locking a mailbox while messing around with it
 611
 612 exim_lock: exim_lock.c os.h
 613         @echo "$(CC) exim_lock.c"
 614         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
 615         @echo "$(LNCC) -o exim_lock"
 616         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
 617           $(LIBS) $(EXTRALIBS)
 618         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 619           echo $(STRIP_COMMAND) exim_lock; \
 620           $(STRIP_COMMAND) exim_lock; \
 621         fi
 622         @echo ">>> exim_lock utility built"
 623         @echo " "
 624
 625 # The X-based Exim monitor program's binary part. There's a macro for cutting
 626 # out the modified TextPop module, because some antique link editors cannot
 627 # handle the fact that it is redefining things that are found later in the
 628 # Xaw library.
 629
 630 # Object modules that are the unique Eximon modules
 631
 632 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 633         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
 634         em_text.o em_xs.o
 635
 636 # The complete modules list also includes some specially compiled versions of
 637 # code from the main Exim source tree.
 638
 639 OBJ_MONBIN = util-host_address.o \
 640              util-queue.o \
 641              util-spool_in.o \
 642              util-store.o \
 643              util-string.o \
 644              util-tod.o \
 645              util-tree.o \
 646              util-xtextencode.o \
 647              $(MONBIN)
 648
 649 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) ../exim_monitor/em_version.c \
 650                 mytypes.h store.h path_max.h macros.h
 651         @echo "$(CC) exim_monitor/em_version.c"
 652         $(FE)$(CC) -o em_version.o -c \
 653           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
 654         @echo "$(LNCC) -o eximon.bin"
 655         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
 656           $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
 657           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
 658         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 659           echo $(STRIP_COMMAND) eximon.bin; \
 660           $(STRIP_COMMAND) eximon.bin; \
 661         fi
 662         @echo ">>> exim monitor binary built"
 663         @echo " "
 664
 665
 666 # Compile step for most of the exim modules. HDRS is a list of headers
 667 # which cause everything to be rebuilt. PHDRS is the same, for the use
 668 # of routers, transports, and authenticators. I can't find a way of doing this
 669 # in one. This list is overkill, but it doesn't really take much time to
 670 # rebuild Exim on a modern computer.
 671
 672 HDRS  = blob.h \
 673         config.h \
 674         dbfunctions.h \
 675         exim.h \
 676         functions.h \
 677         globals.h \
 678         hash.h \
 679         hintsdb.h \
 680         hintsdb_structs.h \
 681         hintsdb/hints_bdb.h \
 682         hintsdb/hints_gdbm.h \
 683         hintsdb/hints_ndbm.h \
 684         hintsdb/hints_sqlite.h \
 685         hintsdb/hints_tdb.h \
 686         local_scan.h \
 687         macros.h \
 688         mytypes.h \
 689         path_max.h \
 690         sha_ver.h \
 691         structs.h \
 692         os.h
 693 PHDRS = ../config.h \
 694         ../dbfunctions.h \
 695         ../exim.h \
 696         ../functions.h \
 697         ../globals.h \
 698         ../hintsdb.h \
 699         ../hintsdb_structs.h \
 700         ../hintsdb/hints_bdb.h \
 701         ../hintsdb/hints_gdbm.h \
 702         ../hintsdb/hints_ndbm.h \
 703         ../hintsdb/hints_sqlite.h \
 704         ../hintsdb/hints_tdb.h \
 705         ../local_scan.h \
 706         ../macros.h \
 707         ../mytypes.h \
 708         ../path_max.h \
 709         ../structs.h \
 710         ../os.h
 711
 712 .SUFFIXES: .o .c
 713 .c.o:;  @echo "$(CC) $*.c"
 714         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 715
 716 # Update Exim's version information and build the version object.  The dependency
 717 # chain here avoids problems under parallel-make.
 718
 719 version.sh:
 720         @../scripts/reversion
 721
 722 version.h: version.sh
 723
 724 cnumber.h: version.h
 725
 726 version.o: $(HDRS) cnumber.h version.h version.c
 727
 728 # This is the dummy module for use by test compiles of individual modules. It
 729 # contains functions such as log_write() that may be called from bits of Exim
 730 # in the tested code.
 731
 732 dummies.o:       dummies.c
 733
 734 # Compile instructions for perl.o for when EXIM_PERL is set
 735
 736 perl.o:          $(HDRS) perl.c
 737         @echo "$(PERL_CC) perl.c"
 738         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
 739
 740 # Compile instructions for the database utility modules
 741
 742 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
 743         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
 744         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 745                                       -DCOMPILE_UTILITY \
 746                                       -DEXIM_DUMPDB \
 747                                       -o exim_dumpdb.o exim_dbutil.c
 748
 749 exim_fixdb.o:    $(HDRS) exim_dbutil.c
 750         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
 751         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 752                                       -DCOMPILE_UTILITY \
 753                                       -DEXIM_FIXDB \
 754                                       -o exim_fixdb.o exim_dbutil.c
 755
 756 exim_tidydb.o:   $(HDRS) exim_dbutil.c
 757         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
 758         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 759                                       -DCOMPILE_UTILITY \
 760                                       -DEXIM_TIDYDB \
 761                                       -o exim_tidydb.o exim_dbutil.c
 762
 763 # Compile instructions for exim_dbmbuild
 764
 765 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
 766         @echo "$(CC) exim_dbmbuild.c"
 767         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY \
 768                 -o exim_dbmbuild.o exim_dbmbuild.c
 769
 770 # Utilities use special versions of some modules - typically with debugging
 771 # calls cut out.
 772
 773 util-host_address.o:   $(HDRS) host_address.c
 774         @echo "$(CC) -DCOMPILE_UTILITY host_address.c"
 775         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-host_address.o host_address.c
 776
 777 util-md5.o:   $(HDRS) md5.c
 778         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
 779         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-md5.o md5.c
 780
 781 util-spool_in.o: $(HDRS) spool_in.c
 782         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
 783         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
 784
 785 util-store.o:    $(HDRS) store.c
 786         @echo "$(CC) -DCOMPILE_UTILITY store.c"
 787         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
 788
 789 util-string.o:   $(HDRS) string.c
 790         @echo "$(CC) -DCOMPILE_UTILITY string.c"
 791         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
 792
 793 util-queue.o:   $(HDRS) queue.c
 794         @echo "$(CC) -DCOMPILE_UTILITY queue.c"
 795         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-queue.o queue.c
 796
 797 util-tod.o:   $(HDRS) tod.c
 798         @echo "$(CC) -DCOMPILE_UTILITY tod.c"
 799         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tod.o tod.c
 800
 801 util-tree.o:   $(HDRS) tree.c
 802         @echo "$(CC) -DCOMPILE_UTILITY tree.c"
 803         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tree.o tree.c
 804
 805 util-xtextencode.o:   $(HDRS) xtextencode.c
 806         @echo "$(CC) -DCOMPILE_UTILITY xtextencode.c"
 807         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-xtextencode.o xtextencode.c
 808
 809 util-os.o:       $(HDRS) os.c
 810         @echo "$(CC) -DCOMPILE_UTILITY os.c"
 811         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
 812                                       -DCOMPILE_UTILITY \
 813                                       -DOS_LOAD_AVERAGE \
 814                                       -DFIND_RUNNING_INTERFACES \
 815                                       -o util-os.o os.c
 816
 817 # The local scan module depends only on its own special header, and is compiled
 818 # from a source whose location is set by configuration.
 819
 820 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 821         @echo "$(CC) local_scan.c"
 822         $(FE)$(CC) -DLOCAL_SCAN -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 823
 824 # Dependencies for the "ordinary" exim modules
 825
 826 acl.o:           $(HDRS) acl.c
 827 base64.o:        $(HDRS) mime.h base64.c
 828 child.o:         $(HDRS) child.c
 829 crypt16.o:       $(HDRS) crypt16.c
 830 daemon.o:        $(HDRS) daemon.c
 831 dbfn.o:          $(HDRS) dbfn.c
 832 debug.o:         $(HDRS) debug.c
 833 deliver.o:       $(HDRS) transports/smtp.h deliver.c
 834 directory.o:     $(HDRS) directory.c
 835 dns.o:           $(HDRS) dns.c
 836 dnsbl.o:         $(HDRS) dnsbl.c
 837 enq.o:           $(HDRS) enq.c
 838 exim.o:          $(HDRS) exim.c
 839 expand.o:        $(HDRS) expand.c
 840 environment.o:   $(HDRS) environment.c
 841 filter.o:        $(HDRS) filter.c
 842 filtertest.o:    $(HDRS) filtertest.c
 843 globals.o:       $(HDRS) globals.c
 844 hash.o:          $(HDRS) hash.c
 845 header.o:        $(HDRS) header.c
 846 host.o:          $(HDRS) host.c
 847 host_address.o:  $(HDRS) host_address.c
 848 ip.o:            $(HDRS) ip.c
 849 log.o:           $(HDRS) log.c
 850 lss.o:           $(HDRS) lss.c
 851 match.o:         $(HDRS) match.c
 852 md5.o:           $(HDRS) md5.c
 853 moan.o:          $(HDRS) moan.c
 854 os.o:            $(HDRS) $(OS_C_INCLUDES) os.c
 855 parse.o:         $(HDRS) parse.c
 856 priv.o:          $(HDRS) priv.c
 857 proxy.o:         $(HDRS) proxy.c
 858 queue.o:         $(HDRS) queue.c
 859 rda.o:           $(HDRS) rda.c
 860 readconf.o:      $(HDRS) readconf.c
 861 receive.o:       $(HDRS) receive.c
 862 retry.o:         $(HDRS) retry.c
 863 rewrite.o:       $(HDRS) rewrite.c
 864 regex_cache.o:   $(HDRS) regex_cache.c
 865 rfc2047.o:       $(HDRS) rfc2047.c
 866 route.o:         $(HDRS) route.c
 867 search.o:        $(HDRS) search.c
 868 sieve.o:         $(HDRS) sieve.c
 869 smtp_in.o:       $(HDRS) smtp_in.c
 870 smtp_out.o:      $(HDRS) smtp_out.c
 871 spool_in.o:      $(HDRS) spool_in.c
 872 spool_out.o:     $(HDRS) spool_out.c
 873 std-crypto.o:    $(HDRS) std-crypto.c
 874 store.o:         $(HDRS) store.c
 875 string.o:        $(HDRS) string.c
 876 tls.o:           $(HDRS) tls.c \
 877                  tls-gnu.c tlscert-gnu.c \
 878                  tls-openssl.c tlscert-openssl.c \
 879                  tls-cipher-stdname.c
 880 tod.o:           $(HDRS) tod.c
 881 transport.o:     $(HDRS) transport.c
 882 tree.o:          $(HDRS) tree.c
 883 verify.o:        $(HDRS) transports/smtp.h verify.c
 884 xtextencode.o:   $(HDRS) xtextencode.c
 885 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
 886 dkim_transport.o: $(HDRS) dkim_transport.c
 887
 888 # Dependencies for WITH_CONTENT_SCAN modules
 889
 890 malware.o:       $(HDRS) malware.c
 891 mime.o:          $(HDRS) mime.h mime.c
 892 regex.o:         $(HDRS) regex.c
 893 spam.o:          $(HDRS) spam.c
 894 spool_mbox.o:    $(HDRS) spool_mbox.c
 895
 896
 897 # Dependencies for EXPERIMENTAL_* modules
 898
 899 arc.o:          $(HDRS) pdkim/pdkim.h arc.c
 900 bmi_spam.o:     $(HDRS) bmi_spam.c
 901 dane.o:         $(HDRS) dane.c dane-openssl.c
 902 dcc.o:          $(HDRS) dcc.h dcc.c
 903 imap_utf7.o:    $(HDRS) imap_utf7.c
 904 utf8.o:         $(HDRS) utf8.c
 905 xclient.o:      $(HDRS) xclient.c
 906
 907 # The module containing tables of available lookups, routers, auths, and
 908 # transports must be rebuilt if any of them are. However, because the makefiles
 909 # for the drivers are always run, we don't actually put the dependencies here,
 910 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
 911 # drtables.o even though the .a files haven't in fact been updated. Instead
 912 # it is arranged that the lower-level makefiles remove drtables.o when they
 913 # rebuild the .a files.
 914
 915 drtables.o:      $(HDRS) drtables.c
 916
 917 # Some sources live in the lookups, routers or auths directory
 918
 919 $(OBJ_LOOKUPS) $(OBJ_ROUTERS) $(OBJ_AUTHS):    $(HDRS)
 920
 921 $(OBJ_LOOKUPS): lookups/lf_functions.h
 922 lf_check_file.o: lookups/lf_check_file.c
 923         @echo "$(CC) $<"
 924         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 925 lf_quote.o:      lookups/lf_quote.c
 926         @echo "$(CC) $<"
 927         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 928 lf_sqlperform.o: lookups/lf_sqlperform.c
 929         @echo "$(CC) $<"
 930         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 931
 932 $(OBJ_ROUTERS): routers/rf_functions.h
 933 rf_change_domain.o:      routers/rf_change_domain.c
 934         @echo "$(CC) $<"
 935         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 936 rf_expand_data.o:        routers/rf_expand_data.c
 937         @echo "$(CC) $<"
 938         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 939 rf_get_errors_address.o: routers/rf_get_errors_address.c
 940         @echo "$(CC) $<"
 941         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 942 rf_get_munge_headers.o:  routers/rf_get_munge_headers.c
 943         @echo "$(CC) $<"
 944         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 945 rf_get_transport.o:      routers/rf_get_transport.c
 946         @echo "$(CC) $<"
 947         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 948 rf_get_ugid.o:           routers/rf_get_ugid.c
 949         @echo "$(CC) $<"
 950         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 951 rf_lookup_hostlist.o:    routers/rf_lookup_hostlist.c
 952         @echo "$(CC) $<"
 953         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 954 rf_queue_add.o:          routers/rf_queue_add.c
 955         @echo "$(CC) $<"
 956         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 957 rf_self_action.o:        routers/rf_self_action.c
 958         @echo "$(CC) $<"
 959         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 960 rf_set_ugid.o:           routers/rf_set_ugid.c
 961         @echo "$(CC) $<"
 962         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 963
 964 auth-spa.o:         auths/auth-spa.c
 965         @echo "$(CC) $<"
 966         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 967 call_pam.o:         auths/call_pam.c
 968         @echo "$(CC) $<"
 969         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 970 call_pwcheck.o:     auths/call_pwcheck.c auths/pwcheck.h
 971         @echo "$(CC) $<"
 972         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 973 call_radius.o:      auths/call_radius.c
 974         @echo "$(CC) $<"
 975         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 976 check_serv_cond.o:  auths/check_serv_cond.c
 977         @echo "$(CC) $<"
 978         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 979 get_data.o:         auths/get_data.c
 980         @echo "$(CC) $<"
 981         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 982 get_no64_data.o:    auths/get_no64_data.c
 983         @echo "$(CC) $<"
 984         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 985 pwcheck.o:          auths/pwcheck.c auths/pwcheck.h
 986         @echo "$(CC) $<"
 987         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $<
 988
 989
 990
 991 # The exim monitor's private modules - the sources live in a private
 992 # subdirectory. The final binary combines the private modules with some
 993 # modules from the main exim binary.
 994
 995 em_StripChart.o: ../exim_monitor/em_StripChart.c
 996 em_TextPop.o:    ../exim_monitor/em_TextPop.c
 997 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
 998 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
 999 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
1000 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
1001 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
1002 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
1003 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
1004 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
1005 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
1006 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
1007 $(MONBIN): $(HDRS)
1008                  @echo "$(CC) exim_monitor/$(@:.o=.c)"
1009                  $(FE)$(CC) -o $@ -c $(CFLAGS) -DCOMPILE_UTILITY -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
1010                    ../exim_monitor/$(@:.o=.c)
1011
1012
1013 # Targets for the various libraries that Exim uses.
1014
1015 # Copies of modules built as dynamic-load libraries
1016
1017 dynmodules: buildlookups buildrouters buildtransports buildauths \
1018                 buildmisc
1019         rm -fr dynmodules
1020         mkdir dynmodules
1021         for d in lookup router transport auth miscmod; do \
1022           for f in $${d}s/*.so; do \
1023             [ -e $$f ] && ln $$f dynmodules/`basename $$f .so`_$$d.so; \
1024           done; \
1025         done; \
1026         true
1027
1028 # The lookups library.
1029
1030 buildlookups: config
1031          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1032            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
1033            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
1034            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
1035          @echo " "
1036
1037 # The routers library.
1038
1039 buildrouters: config
1040          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1041            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" \
1042            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
1043            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
1044          @echo " "
1045
1046 # The transports library.
1047
1048 buildtransports: config
1049          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1050            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" \
1051            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
1052            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
1053          @echo " "
1054
1055 # The library of authorization modules
1056
1057 buildauths: config
1058          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1059            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" \
1060            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
1061            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
1062          @echo " "
1063
1064 # The PDKIM library
1065
1066 buildpdkim: pdkim/pdkim.a
1067 pdkim/pdkim.a: config
1068          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
1069            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
1070            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
1071          @echo " "
1072
1073 buildmisc: config
1074          @cd miscmods && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) \
1075            CC="$(CC)" CFLAGS="$(CFLAGS)" \
1076              CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
1077              FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
1078              INCLUDE="$(INCLUDE) $(IPV6_INCLUDE)"
1079          @echo " "
1080
1081 # The "clean", "install", and "makefile" targets just pass themselves back to
1082 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
1083 # for them in the build directory.
1084
1085 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
1086
1087 # Targets for building stand-alone testing programs for basic testing of
1088 # some of the building blocks. These are not integrated with the makefile-
1089 # building targets. If you change something that is going to cause the
1090 # makefile to be rebuilt, you must run "make makefile" before running one
1091 # of these.
1092
1093 # The testing programs use different versions of some modules - usually
1094 # with bits cut out that are not relevant to the test in hand. For those
1095 # that are used by several tests, we use a different name.
1096
1097 sa-globals.o:    $(HDRS) globals.c
1098         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
1099
1100 sa-os.o:         $(HDRS) os.c
1101         $(CC) -c $(CFLAGS) $(INCLUDE) \
1102                                       -DFIND_RUNNING_INTERFACES \
1103                                       -o sa-os.o os.c
1104
1105 # These are the test targets themselves
1106
1107 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
1108                string.o tod.o version.o utf8.o
1109         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
1110         $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY store.c
1111         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
1112           dummies.o sa-globals.o sa-os.o store.o string.o \
1113           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
1114         rm -f dbfn.o store.o
1115
1116 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
1117                host_address.o store.o string.o tod.o tree.o
1118         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
1119         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
1120         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
1121         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
1122         $(LNCC) -o test_host $(LFLAGS) \
1123           host.o host_address.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
1124           tod.o tree.o $(LIBS) $(LIBRESOLV)
1125         rm -f child.o dummies.o host.o dns.o
1126
1127 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
1128         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
1129         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
1130           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
1131         rm -f os.o
1132
1133 test_parse:  config.h parse.c dummies.o sa-globals.o \
1134              store.o string.o tod.o version.o utf8.o
1135         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
1136         $(LNCC) -o test_parse $(LFLAGS) parse.o \
1137           dummies.o sa-globals.o store.o string.o tod.o version.o \
1138           utf8.o $(LDFLAGS)
1139         rm -f parse.o
1140
1141 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
1142         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
1143         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
1144           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
1145         rm -f string.o
1146
1147 # End