4 This file contains an almost complete lists of four kinds of Exim option:
6 1. Those that can appear in the run time configuration file;
7 2. Those that can be used on the command line;
8 3. Those that can appear in the build time configuration (Local/Makefile);
9 4. Those that can appear in the build time configuration for the Exim monitor
12 This file was last updated for Exim release 4.95.
18 As Exim has developed, new options have been added at each major release. For
19 the most part, backwards compatibility has been maintained, and obsolete
20 options continue to be recognized. However, incompatible changes took place at
21 releases 3.00, and 4.00. In both cases, several groups of options were
22 amalgamated into new, extended options, and obsolete options were removed.
24 The table below contains a complete list of all Exim's current options, along
25 with their types, default values, and where they can be used. String options
26 that are expanded before use are marked with *. Host lists, domain lists, and
27 address lists are always expanded. In some cases the defaults are not fixed
28 values, or not short enough to fit in the table. These are indicated by +. Some
29 other default values are determined when the Exim binary is compiled; these are
32 For options that are specific to a particular driver, the fourth column
33 contains the driver name, for example, appendfile. Otherwise, it contains
35 . `main' for options that appear in the main section of Exim's configuration
38 . `authenticators' for generic options that apply to any authenticator;
40 . `routers' for generic options that apply to any router;
42 . `transports' for generic options that apply to any transport.
44 The fifth column contains the version of Exim in which the option was added, or
45 substantially changed. Where no number is given, the option has been in Exim
46 since the very early releases. The routers were completely reorganised for
47 release 4.00, and so no router options are shown as earlier than 4.00, though
48 in fact some of them were inherited from earlier versions.
50 -----------------------------------------------------------------------------------------
51 accept_8bitmime boolean true main 1.60 changed to true in 4.80
52 acl_not_smtp string* unset main 4.11
53 acl_not_smtp_mime string* unset main 4.51 with content scan
54 acl_smtp_atrn string* unset main 4.99+
55 acl_smtp_auth string* unset main 4.00
56 acl_smtp_connect string* unset main 4.11
57 acl_smtp_data string* unset main 4.00
58 acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr, 4.83 unless disable_prdr
59 acl_smtp_dkim string* unset main 4.70 unless disable_dkim
60 acl_smtp_etrn string* unset main 4.00
61 acl_smtp_expn string* unset main 4.00
62 acl_smtp_helo string* unset main 4.20
63 acl_smtp_mail string* unset main 4.11
64 acl_smtp_mailauth string* unset main 4.21
65 acl_smtp_mime string* unset main 4.50 with content scan
66 acl_smtp_predata string* unset main 4.43
67 acl_smtp_quit string* unset main 4.43
68 acl_smtp_rcpt string* unset main 4.00
69 acl_smtp_starttls string* unset main 4.11
70 acl_smtp_vrfy string* unset main 4.00
71 address_data string* unset routers 4.00
72 address_retry_include_sender boolean true smtp 4.64
73 address_test boolean true routers 4.14
74 admin_groups string list unset main 3.02
75 allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
76 allow_commands string list* unset pipe 1.89
77 allow_defer boolean false redirect 4.00
78 allow_fail boolean false redirect 4.00
79 allow_filter boolean false redirect 4.00
80 allow_freeze boolean false redirect 4.00
81 allow_fifo boolean false appendfile 3.13
82 allow_insecure_tainted_data boolean true main 4.95 support will drop ~4.97ٍ
83 allow_localhost boolean false smtp 1.73
84 allow_mx_to_ip boolean false main 3.14
85 allow_symlink boolean false appendfile
86 allow_utf8_domains boolean false main 4.14
87 arc_sign string* unset smtp 4.91 with Experimental_ARC
88 auth_advertise_hosts host list "*" main 4.00
89 authenticated_sender string* unset smtp 4.14
90 authenticated_sender_force boolean false smtp 4.61
91 authenticate_hosts host list unset smtp 3.13
92 auto_thaw time 0s main
93 av_scanner string* + main 4.50 with content scan
94 batch_id string unset appendfile 4.00
97 batch_max integer 100 appendfile
100 bcc string* unset autoreply
101 bi_command string unset main
102 body_only boolean false transports 2.05
103 bounce_message_file string* unset main 4.00 expanded from 4.94
104 bounce_message_text string unset main 4.00
105 bounce_return_body boolean true main 4.23
106 bounce_return_message boolean true main 4.00
107 bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
108 bounce_sender_authentication string unset main 4.00
109 callout_domain_negative_expire time 3h main 4.11
110 callout_domain_positive_expire time 7d main 4.11
111 callout_negative_expire time 2h main 4.11
112 callout_positive_expire time 24h main 4.11
113 callout_random_local_part string* + main 4.11
114 cannot_route_message string* unset routers 4.11
115 caseful_local_part boolean false routers 4.00
116 cc string* unset autoreply
117 check_ancestor boolean false redirect 4.00
118 check_group boolean false appendfile
120 check_local_user boolean false routers 4.00
121 check_log_inodes integer 0 main
122 check_log_space integer 0 main
123 check_owner boolean true appendfile 3.14
125 check_rfc2047_length boolean true main 4.60
126 check_secondary_mx boolean false dnslookup 4.00
127 check_spool_inodes integer 0 main
128 check_spool_space integer 0 main
129 check_string string "From " appendfile 3.03
131 check_srv string* unset dnslookup 4.31
132 client_authz string* unset gsasl 4.94
133 client_condition string* unset authenticators 4.68
134 client_ignore_invalid_base64 boolean false plaintext 4.61
135 client_name string* + cram_md5 3.10
136 client_password string* unset gsasl 4.94
137 client_secret string* unset cram_md5 3.10
138 client_send string* unset plaintext 3.10
139 unset external (auth) 4.93
140 client_username string* unset gsasl 4.94
141 command string* unset lmtp 3.20
143 unset queryprogram 4.00
144 command_group string unset queryprogram 4.00
145 command_timeout time 5m smtp
146 command_user string unset queryprogram 4.00
147 commandline_checks_require_admin boolean false main 4.90
148 condition string* unset routers 4.00
149 connect_timeout time 0s smtp 1.60
150 connection_max_messages integer 500 smtp 4.00 replaces batch_max
151 create_directory boolean true appendfile
152 create_file string "anywhere" appendfile
153 current_directory string unset transports 4.00
154 unset queryprogram 4.00
155 daemon_smtp_ports string unset main 1.75 pluralised in 4.21
156 daemon_startup_retries int 9 main 4.52
157 daemon_startup_sleep time 30s main 4.52
158 dane_require_tls_ciphers string* unset smtp 4.91
159 data string unset redirect 4.00
160 data_timeout time 5m smtp
161 debug_print string* unset authenticators 4.00
163 unset transports 2.00
164 debug_store boolean false main 4.90
165 delay_after_cutoff boolean true smtp
166 delay_warning time list 24h main
167 delay_warning_condition string* + main 1.73
168 deliver_drop_privilege boolean false main 4.00
169 deliver_queue_load_max fixed-point unset main 1.70
170 delivery_date_add boolean false transports
171 delivery_date_remove boolean true main
172 dkim_canon string* unset smtp 4.70
173 dkim_domain string list* unset smtp 4.72
174 dkim_private_key string* unset smtp 4.70
175 dkim_selector string* unset smtp 4.70
176 dkim_sign_headers string* (RFC4871) smtp 4.70
177 dkim_strict string* unset smtp 4.70
178 dkim_timestamps integer* unset smtp 4.92
179 dkim_verify_hashes string sha256:sha512:sha1 main 4.93
180 dkim_verify_keytypes string ed25519:rsa main 4.93
181 dkim_verify_min_keysizes string list "rsa=1024 ed25519=250" main 4.94
182 dkim_verify_minimal boolean false main 4.93
183 dkim_verify_signers string* $dkim_signers main 4.70
184 directory string* unset appendfile
185 directory_file string* + appendfile
186 directory_mode octal-integer 0700 appendfile
187 directory_transport string* unset redirect 4.00
188 disable_ipv6 boolean false main 4.61
189 disable_logging boolean false routers 4.11
190 false transports 4.11
191 dmarc_forensic_sender string unset main 4.82 if experimental_dmarc, 4.93 mainline
192 dmarc_history_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
193 dmarc_tld_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
194 dns_again_means_nonexist domain list unset main 1.89
195 dns_check_names_pattern string + main 2.11
196 dns_cname_loops integer 0 main 4.92 Set to 9 for older behaviour
197 dns_csa_search_limit integer 5 main 4.60
198 dns_csa_use_reverse boolean true main 4.60
199 dns_dnssec_ok integer -1 main 4.82
200 dns_dane_ok integer -1 main 4.83
201 dns_ipv4_lookup boolean false main 3.20
202 dns_qualify_single boolean true smtp
203 dns_retrans time 0s main 1.60
204 dns_retry integer 0 main 1.60
205 dns_search_parents boolean false smtp
206 dns_use_edns0 integer -1 main 4.76
207 domains domain list unset routers 4.00
208 driver string unset authenticators
211 drop_cr boolean false main 4.00 became a no-op in 4.21
212 dscp string unset smtp 4.82
213 dsn_from string* + main 4.67
214 envelope_to_add boolean false transports
215 envelope_to_remove boolean true main
216 environment string* unset pipe 2.95
217 errors_copy string list* unset main
218 errors_reply_to string unset main
219 errors_to string* unset routers 4.00
220 escape_string string ">From " appendfile 3.03
222 exim_group string ++ main
223 exim_path string ++ main
224 exim_user string ++ main
225 exim_version string ++ main 4.93
226 expn boolean true routers
227 extra_local_interfaces string unset main 4.21
228 extract_addresses_remove_arguments boolean true main 1.92
229 fail_verify boolean false routers
230 fail_verify_recipient boolean false routers 4.00
231 fail_verify_sender boolean false routers 4.00
232 fallback_hosts string list unset routers 4.00
234 file string* unset appendfile
237 file_expand boolean false autoreply
238 file_format string unset appendfile 3.03
239 file_must_exist boolean false appendfile
240 file_optional boolean false autoreply
241 file_transport string* unset redirect 4.00
242 filter_prepend_home boolean true redirect 4.63
243 final_timeout time 10m smtp
244 finduser_retries integer 0 main
245 forbid_blackhole boolean false redirect 4.00
246 forbid_exim_filter boolean false redirect 4.44
247 forbid_fail boolean false redirect 4.00
248 forbid_file boolean false redirect 4.00
249 forbid_filter_existstest boolean false redirect 4.00
250 forbid_filter_logwrite boolean false redirect 4.00
251 forbid_filter_lookup boolean false redirect 4.00
252 forbid_filter_perl boolean false redirect 4.00
253 forbid_filter_readfile boolean false redirect 4.00
254 forbid_filter_readsocket boolean false redirect 4.11
255 forbid_filter_reply boolean false redirect 4.00
256 forbid_filter_run boolean false redirect 4.00
257 forbid_include boolean false redirect 4.00
258 forbid_pipe boolean false redirect 4.00
259 forbid_sieve_filter boolean false redirect 4.44
260 forbid_smtp_code boolean false redirect 4.63
261 force_command boolean false pipe 4.82
262 freeze_exec_fail boolean false pipe 1.89
263 freeze_signal boolean false pipe 4.75
264 freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
265 from string* unset autoreply
266 gecos_name string* unset main
267 gecos_pattern string unset main
268 gethostbyname boolean false smtp
269 gnutls_allow_auto_pkcs11 boolean false main 4.82
270 gnutls_compat_mode boolean unset main 4.70
271 gnutls_require_kx string* unset main 4.67 deprecated, warns
272 string* unset smtp 4.67 deprecated, warns
273 gnutls_require_mac string* unset main 4.67 deprecated, warns
274 string* unset smtp 4.67 deprecated, warns
275 gnutls_require_protocols string* unset main 4.67 deprecated, warns
276 string* unset smtp 4.67 deprecated, warns
277 group string + routers 4.00
278 unset transports 4.00 replaces local option in some transports
279 header_line_maxsize integer 0 (unset) main 4.14
280 header_maxsize integer 1M main 4.14
281 headers string* unset autoreply
282 headers_add string* unset routers 4.00
284 headers_charset string ++ main 4.21
285 headers_only boolean false transports 2.05
286 headers_remove string* unset routers 4.00
288 headers_rewrite string unset transports 3.20
289 helo_accept_junk_hosts host list unset main 3.00
290 helo_allow_chars string "" main 4.02
291 helo_lookup_domains domain list unset main 4.00
292 helo_data string* "$primary_hostname" smtp 3.21
293 helo_try_verify_hosts host list unset main 4.00
294 helo_verify_hosts host list unset main 1.73
295 hide_child_in_errmsg false redirect 4.00
296 hold_domains domain list unset main 1.70
297 home_directory string* unset transports 4.00 replaces individual options
298 host_all_ignored string "defer" manualroute 4.67
299 host_find_failed string "freeze" manualroute 4.00
300 host_name_extract string
301 "${if and {{match{.outlook.com\\$}{$host}} {match{$item}{\\N^250-([\\w.]+)\\s\\N}}} {$1}}"
303 host_lookup host list unset main 3.00
304 host_lookup_order string list "bydns:byaddr" main 4.30
305 host_reject_connection host list unset main 4.00
306 hosts string unset iplookup 4.00
307 string list* unset smtp
308 hosts_avoid_esmtp host list unset smtp 4.21
309 hosts_avoid_pipelining host list unset smtp 4.67
310 hosts_avoid_tls host list unset smtp 3.20
311 hosts_connection_nolog host list unset main 4.43
312 hosts_max_try integer 5 smtp 3.20
313 hosts_max_try_hardlimit integer 50 smtp 4.50
314 hosts_nopass_tls host list unset smtp 4.00
315 hosts_noproxy_tls host list "*" smtp 4.90
316 hosts_override boolean false smtp 2.11
317 hosts_pipe_connect host_list unset smtp 4.93 if experimental_pipe_connect
318 hosts_randomize boolean false manualroute 4.00
320 hosts_require_auth host list unset smtp 4.00
321 hosts_require_alpn host list unset main 4.95
323 hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
324 hosts_require_helo host list "*" main 4.95
325 hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
326 hosts_require_tls host list unset smtp 3.20
327 hosts_treat_as_local domain list unset main 1.95
328 hosts_try_auth host list unset smtp 4.00
329 hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
330 hosts_try_fastopen host list unset smtp 4.88
331 hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
332 ibase_servers string unset main 4.23
333 ignore_bounce_errors_after time 0s main 4.00
334 ignore_eacces boolean false redirect 4.00
335 ignore_enotdir boolean false redirect 4.00
336 ignore_fromline_hosts host list unset main
337 ignore_fromline_local boolean false main 2.05
338 ignore_status boolean false pipe
339 ignore_target_hosts host list unset routers 4.00
340 include_directory string unset redirect 4.00
341 initgroups false routers 4.00
342 interface string list unset smtp 1.70
343 keep_malformed time 4d main
344 keepalive boolean true smtp 2.05
345 ldap_default_servers string list unset main 3.02
346 ldap_version int 2 or 3 main 4.14
347 limits_advertise_hosts host list * main 4.98
348 local_from_check boolean true main 3.14
349 local_from_prefix string unset main 3.14
350 local_from_suffix string unset main 3.14
351 local_interfaces string list unset main 1.60
352 local_part_prefix string unset routers 4.00 replaces prefix
353 local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
354 local_part_suffix string unset routers 4.00 replaces suffix
355 local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
356 local_parts string list* unset routers 4.00
357 local_scan_timeout time 5m main 4.03
358 local_sender_retain boolean false main 4.00
359 localhost_number string unset main
360 lock_fcntl_timeout time 0s appendfile 3.14
361 lock_flock_timeout time 0s appendfile 4.11
362 lock_interval time 3s appendfile
363 lock_retries integer 10 appendfile
364 lockfile_mode octal-integer 0600 appendfile
365 lockfile_timeout time 30m appendfile
366 log string* unset autoreply
367 log_as_local boolean + routers 4.00
368 log_file_path string list ++ main
369 log_defer_output boolean false pipe 1.89
370 log_fail_output boolean false pipe 1.60
371 log_output boolean false pipe 1.60
372 log_selector string unset main 4.00
373 log_timezone boolean false main 4.11
374 lookup_open_max integer 25 main 2.05
375 mailbox_filecount string* unset appendfile 4.43
376 mailbox_size string* unset appendfile 4.43
377 maildir_format boolean false appendfile 1.70
378 maildir_retries integer 10 appendfile 1.70
379 maildir_tag string* unset appendfile 1.92
380 maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
381 maildirfolder_create_regex string unset appendfile 4.62
382 mailstore_format boolean false appendfile 2.00
383 mailstore_prefix string* unset appendfile 2.00
384 mailstore_suffix string* unset appendfile 2.00
385 match_directory string* unset localuser
386 max_output integer 20K pipe
387 max_rcpt integer 100 smtp 1.60
388 max_user_name_length integer 0 main
389 mbx_format boolean false appendfile 2.10
390 message_body_newlines boolean false main 4.68
391 message_body_visible integer 500 main
392 message_id_header_domain string* unset main 4.11
393 message_id_header_text string* unset main
394 message_linelength_limit integer 998 smtp 4.94
395 message_logs boolean true main 4.10
396 message_prefix string* + appendfile 4.00 replaces prefix
397 string* unset pipe 4.00 replaces prefix
398 message_size_limit integer 50M main
400 message_suffix string* + appendfile 4.00 replaces suffix
401 string* unset pipe 4.00 replaces suffix
402 mode octal-integer 0600 appendfile
404 mode_fail_narrower boolean true appendfile 1.70
405 modemask octal-integer 022 redirect 4.00
406 more boolean true routers 4.00
407 move_frozen_messages boolean false main 3.09
408 multi_domain boolean true smtp
409 mx_domains domain list unset dnslookup 4.00
410 mx_fail_domains domain list unset dnslookup 4.43
411 mysql_servers string list unset main 3.03
412 never_users string list unset main
413 notifier_socket string "$spool_directory/exim_daemon_notify"
415 notify_comsat boolean false appendfile
416 once string* unset autoreply
417 once_file_size integer 0 autoreply 3.20
418 once_repeat time 0s autoreply 2.95
419 one_time boolean false redirect 4.00
420 openssl_options string +no_sslv2 main 4.73 default changed in 4.80
421 optional boolean false iplookup 4.00
422 oracle_servers string unset main 4.00
423 owners string list unset redirect 4.00
424 owngroups string list unset redirect 4.00
425 panic_coredump boolean false main 4.96
426 pass_on_timeout boolean false routers 4.00
427 pass_router string unset routers 4.00
428 path string "/usr/bin" pipe
429 percent_hack_domains domain list unset main
430 perl_at_start boolean false main 2.10
431 perl_startup string unset main 2.10
432 permit_coredump boolean false pipe 4.73
433 pgsql_servers string list unset main 3.14
434 pid_file_path string ++ main
435 pipe_as_creator boolean false pipe
436 pipe_transport string* unset redirect 4.00
437 pipelining_advertise_hosts host list "*" main 4.14
438 pipelining__connect_advertise_hosts host list "*" main 4.92 if experimental_pipe_connect
439 port integer 0 iplookup 4.00
441 preserve_message_logs boolean false main
442 prdr_enable boolean false main 4.82 if experimental_prdr
443 primary_hostname string + main
444 print_topbitchars boolean false main 1.89
445 process_log_path string unset main 4.21
446 prod_requires_admin boolean true main 1.70
447 protocol string "udp" iplookup 4.00
448 string "smtp" smtp 3.20
449 public_name string unset authenticators 3.10
450 qualify_domain string + main
451 string* unset redirect 4.31
452 qualify_preserve_domain boolean false redirect 4.00
453 qualify_recipient string + main
454 qualify_single boolean true dnslookup 4.00
455 query string* + iplookup 4.00
456 queue_domains domain list unset main 4.00
457 queue_fast_ramp boolean false main 4.95
458 queue_list_requires_admin boolean true main 1.95
459 queue_only boolean false main
460 queue_only_file string unset main 2.05
461 queue_only_load fixed-point unset main
462 queue_only_load_latch boolean true main 4.68
463 queue_only_override boolean true main 4.21
464 queue_run_in_order boolean false main 1.70
465 queue_run_max integer 5 main
466 queue_smtp_domains domain list unset main
467 quota string* unset appendfile 1.60
468 quota_directory string* unset appendfile 4.11
469 quota_filecount integer 0 appendfile 2.05
470 quota_is_inclusive boolean true appendfile 3.20
471 quota_size_regex string unset appendfile 3.14
472 quota_warn_message string* + appendfile 2.10
473 quota_warn_threshold string* 0 appendfile 2.10
474 rcpt_include_affixes boolean false transports 4.21
475 receive_timeout time 0s main 4.00 replacing accept_timeout
476 received_header_text string* + main
477 received_headers_max integer 30 main
478 recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
479 recipients_max integer* 50000 main 1.60 default changed in 4.95 (was 0)
480 recipients_max_reject boolean false main 1.70
481 redirect_router string unset routers 4.00
482 remote_max_parallel integer 1 main
483 remote_sort_domains domain list unset main 4.00 replacing remote_sort
484 repeat_use boolean true redirect 4.00
485 reply_to string* unset autoreply 2.05
486 reply_transport string* unset redirect 4.00
487 require_files string list* unset routers 4.00
488 reroute string* unset iplookup 4.00
489 response_pattern string unset iplookup 4.00
490 restrict_to_path boolean false pipe
491 retry_data_expire time 7d main 3.03
492 retry_include_ip_address boolean true smtp 1.92
493 retry_interval_max time 24h main
494 retry_use_local_part boolean + routers 4.00
495 + transports 4.00 replacing individual options
496 return_fail_output boolean false pipe 1.60
497 return_message boolean false autoreply
498 return_output boolean false pipe
499 return_path string* unset transports 2.05
500 return_path_add boolean false transports
501 return_path_remove boolean true main
502 return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
503 rewrite boolean true redirect 4.00
504 rewrite_headers boolean true dnslookup 4.00
505 rfc1413_hosts host list * main
506 rfc1413_query_timeout time 5s main
507 router_home_directory string* unset routers 4.11
508 route_data string* unset manualroute 4.00
509 route_list string list unset manualroute 4.00
510 same_domain_copy_routing boolean false dnslookup 4.00
511 search_parents boolean false dnslookup 4.00
512 self string "freeze" routers 4.00
513 sender_unqualified_hosts host list unset main
514 senders address list unset routers 4.00
515 serialize_hosts host list unset smtp 1.60
516 server_advertise_condition string* unset authenticators 4.14
517 server_channelbinding bool false gsasl 4.80
518 server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
519 server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
520 server_keytab string* unset heimdal_gssapi 4.80
521 server_mail_auth_condition string* unset authenticators 3.22
522 server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
523 server_password string unset gsasl 4.80
524 server_param1 string* unset tls (auth) 4.86
525 server_param2 string* unset tls (auth) 4.86
526 server_param3 string* unset tls (auth) 4.86
527 server_param2 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
528 server_param3 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
529 server_prompts string* unset plaintext 3.10
530 server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
531 server_scram_iter string* unset gsasl 4.80
532 server_scram_salt string* unset gsasl 4.80
533 server_secret string* unset cram_md5 3.10
534 server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
535 server_set_id string* unset authenticators 3.10
536 set string* unset routers 4.93
537 shadow_condition string* unset transports
538 shadow_transport string unset transports
539 sieve_inbox string* "inbox" redirect 4.99
540 sieve_enotify_mailto_owner string* "inbox" redirect
541 sieve_subaddress string* "inbox" redirect
542 sieve_useraddress string* "inbox" redirect
543 sieve_vacation_directory string* "inbox" redirect
544 size_addition integer 1024 smtp 1.91
545 skip_syntax_errors boolean false redirect 4.00
546 smtp_accept_keepalive boolean true main
547 smtp_accept_max integer 20 main
548 smtp_accept_max_nonmail integer 10 main 4.11
549 smtp_accept_max_nonmail_hosts host list * main 4.14
550 smtp_accept_max_per_connection integer 1000 main 4.00
551 smtp_accept_max_per_host integer 0 main 2.05
552 smtp_accept_queue integer 0 main
553 smtp_accept_queue_per_connection integer 10 main 2.03
554 smtp_accept_reserve integer 0 main
555 smtp_active_hostname string* unset main 4.33
556 smtp_backlog_monitor integer 0 main 4.95
557 smtp_banner string* + main
558 smtp_check_spool_space boolean true main 2.10
559 smtp_connect_backlog integer 5 main
560 smtp_enforce_sync boolean true main 4.00
561 smtp_etrn_command string* unset main 1.92
562 smtp_etrn_serialize boolean true main 1.89
563 smtp_load_reserve fixed-point unset main
564 smtp_max_synprot_errors integer 3 main 4.30
565 smtp_max_unknown_commands integer 3 main 4.14
566 smtp_ratelimit_hosts host list unset main 4.00
567 smtp_ratelimit_mail string unset main 4.00
568 smtp_ratelimit_rcpt string unset main 4.00
569 smtp_receive_timeout time 5m main
570 smtp_reserve_hosts host list unset main
571 smtp_return_error_details boolean false main 4.11
572 socket string* unset lmtp 4.11
573 spamd_address string* + main 4.50 with content scan
574 spf_guess string "v=spf1 a/24 mx/24 ptr ?all"
575 main 4.91 with SUPPORT_SPF
576 spf_smtp_comment_template string* "Please see http://www.open-spf.org/Why"
577 main 4.94 with SUPPORT_SPF
578 split_spool_directory boolean false main 1.70
579 spool_directory string ++ main
580 spool_wireformat boolean false main 4.90
581 sqlite_dbfile string* unset main 4.94 with LOOKUP_SQLITE
582 sqlite_lock_timeout time 5s main 4.53
583 strict_acl_vars boolean false main 4.64
584 srv_fail_domains domain list unset dnslookup 4.43
585 strip_excess_angle_brackets boolean false main
586 strip_trailing_dot boolean false main
587 subject string* unset autoreply
588 syntax_errors_text string* unset redirect 4.00
589 syntax_errors_to string unset redirect 4.00
590 syslog_duplication boolean true main 4.21
591 syslog_facility string unset main 4.20
592 syslog_processname string "exim" main 4.20
593 syslog_timestamp boolean true main 4.00
594 system_filter string unset main 4.00 replacing message_filter
595 system_filter_directory_transport string unset main 4.00 replacing message_filter
596 system_filter_file_transport string unset main 4.00 replacing message_filter
597 system_filter_group string unset main 4.00 replacing message_filter
598 system_filter_pipe_transport string unset main 4.00 replacing message_filter
599 system_filter_reply_transport string unset main 4.00 replacing message_filter
600 system_filter_user string unset main 4.00 replacing message_filter
601 tcp_nodelay boolean true main 4.23
603 tcp_wrappers_daemon_name string* ++ main 4.73
604 temp_errors string list + pipe 1.95
605 text string* unset autoreply
606 timeout time 5m lmtp 3.20
610 timeout_defer boolean false pipe 4.51
611 timeout_frozen_after time 0s main 3.20
612 timezone string + main 3.15
613 tls_advertise_hosts host list * main 3.20
614 tls_alpn string* unset main 4.95
616 tls_certificate string* unset main 3.20
618 tls_dh_max_bits integer 2236 main 4.80
619 tls_dh_min_bits integer 1024 smtp 4.82
620 tls_dhparam string* unset main 3.20
621 tls_ocsp_file string* unset main 4.80 if experimental_ocsp
622 tls_on_connect_ports string unset main 4.43
623 tls_privatekey string* unset main 3.20
625 tls_remember_emstp boolean false main 4.21
626 tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
627 string* unset main 4.33
628 tls_resumption_hosts host list* unset main 4.95
629 host list* unset smtp 4.95
630 tls_sni string* unset main 4.80
631 tls_tempfail_tryclear boolean true smtp 4.05
632 tls_try_verify_hosts host list unset main 4.00
633 tls_verify_certificates string* unset main 3.20
635 tls_verify_hosts host list unset main 3.20
636 to string* unset autoreply
637 translate_ip_address string unset routers 4.00
638 transport string* unset routers 4.00
639 transport_current_directory string unset routers 4.00
640 transport_home_directory string unset routers 4.00
641 transport_filter string unset transports
642 transport_filter_timeout time 5m transports 4.30
643 trusted_groups string list unset main
644 trusted_users string list unset main
645 umask octal-integer 022 pipe
646 unknown_login string unset main
647 unknown_username string unset main
648 unseen boolean false routers 4.00
649 untrusted_set_sender boolean false main 3.20
650 use_bsmtp boolean false appendfile 4.00
652 use_crlf boolean false appendfile 1.89
654 use_fcntl_lock boolean + appendfile 1.70
655 use_flock_lock boolean + appendfile 4.11
656 use_lockfile boolean + appendfile
657 use_mbx_lock boolean + appendfile 2.10
658 use_shell boolean false pipe 1.70
659 user string + routers 4.00
660 unset transports 4.00 replaces individual options
661 utf8_downconvert integer unset smtp 4.92 if SUPPORT_I18N
662 uucp_from_pattern string + main 1.75
663 uucp_from_sender string* "$1" main 1.75
664 verify boolean true routers 4.00
665 verify_only boolean false routers 4.00
666 verify_recipient boolean true routers 4.00
667 verify_sender boolean true routers 4.00
668 warn_message_file string* unset main 4.00 expanded from 4.94
669 widen_domains string list unset dnslookup 4.00
670 write_rejectlog boolean true main 4.31
674 2. COMMAND LINE OPTIONS
675 -----------------------
677 The table below contains a complete list of all Exim's command line options.
678 Those marked with # are available only to trusted users, those marked with +
679 are available only to admin users, and those marked with * exist only to
680 provide compatibility with Sendmail.
683 --help Give a little help (not a lot)
684 --version Give version information (alias for -bV)
687 -bdf + Start daemon and run it in the foreground
688 -be Test string expansion
689 -bem Test string expansion, read test message first
690 -bF Test system filter file
691 -bf Test user filter file
692 -bfd Set domain for filter testing
693 -bfl Set local part for filter testing
694 -bfp Set local part prefix for filter testing
695 -bfs Set local part suffix for filter testing
696 -bh Test incoming SMTP call, omitting callouts
697 -bhc Test incoming SMTP call, with callouts
698 -bi * Run <command>bi_command</command>
699 -bI:help Show list of accepted -bI:<tag> options
700 -bm Accept message on standard input
701 -bmalware + Invoke configured malware scanning against supplied filename
702 -bnq Don't qualify addresses in locally submitted messages
703 -bP Show configuration option settings
705 -bpa + ... with generated addresses as well
706 -bpc + ... but just show a count of messages
707 -bpr + ... do not sort
708 -bpra + ... with generated addresses, unsorted
709 -bpru + ... only undelivered addresses, unsorted
710 -bpu + ... only undelivered addresses
711 -brt Test retry rules
712 -brw Test rewriting rules
713 -bS Read batch SMTP on standard input
714 -bs Run SMTP on standard input and output
715 -bt Test address directing and routing
716 -bV Verify version number
717 -bv Test recipient address verification
718 -bvs Test sender address verification
719 -bw + Inetd wait mode
720 -C + Use alternate configuration file
721 -D + Define macro for configuration file
722 -d + Turn on debugging output
723 -dd + Ditto, but if a daemon, not for subprocesses
724 -dropcr Remove CR character in input: became a no-op in 4.21
726 -ex * Synonym for -oex (for several different x)
727 -F Set calling user name
728 -f # Set calling user address
731 -i Dot does not terminate message
732 -M + Force deliver specific message
733 -Mar + Add recipient to message
734 -MC Internal use only
735 -MCA Internal use only
736 -MCP Internal use only
737 -MCQ Internal use only
738 -MCS Internal use only
739 -MCT Internal use only
740 -Mc + Deliver specific message
741 -Mes + Edit message sender
742 -Mf + Freeze message(s)
743 -Mg + Give up (bounce) message(s)
744 -Mmad + Mark all recipients delivered
745 -Mmd + Mark one recipient delivered
746 -Mrm + Remove message(s) (no bounce)
747 -Mset + Load message's variables when testing with -be
748 -Mt + Thaw message(s)
749 -Mvb + View message body
750 -Mvc + View entire message in RFC 2822 format
751 -Mvh + View message header
752 -Mvl + View message log
754 -N + Deliver without transporting
757 -oA * Supply argument for <option>-bi</option>
758 -oB Set max messages down one connection
759 -odb Background delivery
760 -odf Foreground delivery
761 -odi Foreground delivery
762 -odq Queue message; do not deliver
763 -odqs ... do not do SMTP deliveries
764 -oee Error sent by mail; zero return code
765 -oem Error sent by mail; non-zero return code
766 -oep Error written to standard error stream
767 -oeq * Error written to standard error stream
768 -oew * Error sent by mail; non-zero return code
769 -oi Dot does not terminate message
770 -oitrue * Dot does not terminate message
771 -oMa # Supply host address
772 -oMaa # Supply authenticator name
773 -oMai # Supply authenticated id
774 -oMas # Supply authenticated sender
775 -oMi # Supply interface address
776 -oMm # Supply message reference
777 -oMr # Supply protocol name
778 -oMs # Supply host name
779 -oMt # Supply ident string
782 -oP * Specify path for daemon's pid file
783 -or Timeout non-SMTP messages
784 -os Timeout for SMTP messages
785 -ov * Verbose; same as -v
786 -oX Alternative port for daemon
787 -pd Delay Perl interpreter start
788 -ps Do not delay Perl interpreter start
789 -p<r>:<s> * Same as -oMr <r> -oMs <s>
791 -qf + ... force delivery ) Other combinations are
792 -qff + ... and include frozen messages ) possible. The syntax is
793 -qi + ... initial deliveries only )
794 -ql + ... local deliveries only ) -q[q][f][f][i|l][time]
795 -qq + Two-stage queue run )
798 -R Select by recipient in queue run
800 -Rff ... and frozen messages
801 -Rr ... using regular expression
802 -Rrf ... with forcing
803 -Rrff ... and frozen messages
805 -S Select by sender in queue run
807 -Sff ... and frozen messages
808 -Sr ... using regular expression
809 -Srf ... with forcing
810 -Srff ... and frozen messages
811 -Tqt * Used by Exim test suite; not recognized in normal use
812 -t Take recipients from header lines
814 -tls-on-connect Do TLS on startup (for legacy clients)
816 -v Verbose - shows SMTP dialogue and other delivery info
817 -x Ignored (AIX compatibility)
820 3. BUILD TIME OPTIONS FOR EXIM
821 ------------------------------
823 The table below contains a "mostly" complete list of options that can be
824 set in Local/Makefile when building Exim. The only items not included are
825 those whose names can be trivially derived from rules stated below.
827 More information about individual options can be found in src/EDITME and
830 The second column below gives the type of option:
832 . `system' means the option is concerned with the operating system;
834 . `driver' means the option selects a driver to be included in the binary;
836 . `lookup' means the option selects a lookuptype to be included in the binary;
838 . `mandatory' means the option is required to be supplied;
840 . `recommended' means the option is recommended to be supplied;
842 . `optional' means what it says;
844 Those marked with * are specialized and are unlikely to be required in most
845 installations. Those that are marked with ** are commonly set in OS-specific
846 Makefiles. If you use any of these in your Local/Makefile, you may need to
847 reproduce some of the OS-specific settings. For example, in the Makefile for
848 Solaris (which is actually called OS/Makefile-SunOS5), there is
850 LIBS=-lsocket -lnsl -lkstat
852 If you use LIBS to add extra libraries, you must also include the OS ones in
853 your setting. It is better, in this particular case, to use EXTRALIBS, which is
854 empty by default, and is provided for just this reason. Of course, if you do
855 actually want to modify a setting from the OS-specific file, there is nothing
856 to stop you overriding it in your Local/Makefile.
858 When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
859 you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
860 libraries specific only to that module. These rules are only used where the
861 relevant lookup is a module. These options are not explicitly listed below.
863 Variables with names endined `_PC' are used for pkg-config integration; setting
864 the value to the name of a pkg-config package will cause Exim's build system to
865 query the --cflags and --libs for the given name, when building anything
866 dependent upon the component associated with the `_PC' variable. For lookups,
867 if the lookup is dynamically loaded, then this *replaces* the use of the
868 corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
869 is statically loaded into Exim, the results will be inserted into the
870 "LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
871 will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
872 only listed below for the TLS implementation cases.
875 Option Type Description
876 ------------------------------------------------------------------------------
878 ALT_CONFIG_PREFIX optional restricts location of -C files
879 APPENDFILE_MODE optional*
880 APPENDFILE_DIRECTORY_MODE optional*
881 APPENDFILE_LOCKFILE_MODE optional*
882 AR system command to build a library
883 AUTH_CRAM_MD5 driver include cram_md5 authenticator
884 AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
885 AUTH_GSASL driver include GNU SASL authenticator
886 AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
887 AUTH_LIBS system library linkage for authenticators
888 AUTH_PLAINTEXT driver include plaintext authenticator
889 AUTH_SPA driver include SPA (NTLM) authenticator
890 AUTH_VARS=3 optional* number of $auth variables
891 BASENAME_COMMAND system** path to basename
892 BASE_62=62 optional* not normally changed for Unix
893 BIN_DIRECTORY mandatory Exim binary directory
894 CC system** C compiler
895 CFLAGS system** flags for C compiler
896 CFLAGS_DYNAMIC system** extra flags needed for .so modules
897 CHGRP_COMMAND system** path to chgrp
898 CHOWN_COMMAND system** path to chown
899 COMPRESS_COMMAND system path to a compress command
900 COMPRESS_SUFFIX system suffix added to compressed files
901 CONFIGURE_FILE mandatory Exim runtime configuration file
902 CONFIGURE_FILE_USE_EUID optional*
903 CONFIGURE_FILE_USE_NODE optional*
904 CONFIGURE_GROUP optional* alternate group for configuration file
905 CONFIGURE_OWNER optional* alternate owner for configuration file
906 CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
907 DBMLIB optional** location of DBM library
908 DB_DIRECTORY_MODE optional* mode for hints directory
909 DB_LOCKFILE_MODE optional* mode for hints lock files
910 DB_LOCK_TIMEOUT optional* timeout for hints lock files
911 DB_MODE optional* mode for hints files
912 DEFAULT_CRYPT optional default crypt() function
913 DELIVER_IN_BUFFER_SIZE optional*
914 DELIVER_OUT_BUFFER_SIZE optional*
915 DISABLE_DKIM optional disables DKIM support
916 DISABLE_DNSSEC optional disables attempts to use DNSSEC
917 DISABLE_D_OPTION optional disables -D option
918 ERRNO_QUOTA optional* error code for system quota failures
919 EXICYCLOG_MAX optional number of old log files to keep
920 EXIMDB_DIRECTORY_MODE optional* for hints database directory
921 EXIMDB_LOCKFILE_MODE optional* for hints lock files
922 EXIMDB_MODE optional* mode for hints files
923 EXIMON_TEXTPOP system**
925 EXIM_GROUP mandatory group to use for Exim
926 EXIM_MONITOR optional set to eximon.bin to compile
928 EXIM_USER mandatory user to use for Exim
929 EXIWHAT_EGREP_ARG system** to find Exim processes from ps
930 EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
931 EXIWHAT_MULTIKILL_CMD system**
932 EXIWHAT_MULTIKILL_ARG system**
933 EXIWHAT_PS_ARG system** to list all processes
934 EXIWHAT_PS_CMD system** path to ps command
935 EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
936 EXTRALIBS system additional libraries
937 EXTRALIBS_EXIM system additional libraries for Exim only
938 EXTRALIBS_EXIMON system additional libraries for the monitor
939 FIXED_NEVER_USERS optional can't override at runtime
940 HAVE_ICONV system the iconv() function is available
941 HAVE_IPV6 system include IPv6 support
942 HEADERS_CHARSET optional charset for decoded header lines
943 HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
944 HEADER_MAXSIZE optional* max memory for message header
945 HOSTNAME_COMMAND system** path to hostname command
946 INCLUDE system path to include files
947 INFO_DIRECTORY optional directory for Info documentation
948 INPUT_DIRECTORY_MODE optional mode for input directory
949 IPV6_INCLUDE system additional includes for IPv6
950 IPV6_LIBS system additional libraries for IPv6
951 LDAP_LIB_TYPE optional type of LDAP library
952 LFLAGS system** link editor flags
953 LIBIDENTCFLAGS system C flags when compiling libident
954 LIBIDENTNAME system name for libident library
955 LIBRESOLV system** library for DNS resolver
956 LIBS system** additional libraries
957 LIBS_EXIM system** additional libraries for Exim ony
958 LIBS_EXIMON system** additional libraries for monitor
959 LOCAL_SCAN_SOURCE optional location of local_scan() source
960 LOG_DIRECTORY_MODE optional mode for log directory
961 LOG_FILE_PATH optional path to log files
962 LOG_MODE optional mode for log files
963 LOOKUP_CDB lookup include cdb lookup
964 LOOKUP_DBM lookup include dbm lookup
965 LOOKUP_DNSDB lookup include dnsdb lookup
966 LOOKUP_DSEARCH lookup include dsearch lookup
967 LOOKUP_INCLUDE lookup include files for lookups
968 LOOKUP_LDAP lookup include ldap lookup
969 LOOKUP_LIBS lookup include libraries for lookups
970 LOOKUP_LSEARCH lookup include all lsearch lookups
971 LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
972 LOOKUP_MYSQL lookup include mysql lookup
973 LOOKUP_NIS lookup include nis lookup
974 LOOKUP_NISPLUS lookup include nisplus lookup
975 LOOKUP_ORACLE lookup include oracle lookup
976 LOOKUP_PGSQL lookup include pgsql lookup
977 LOOKUP_TESTDB lookup*
978 LOOKUP_WHOSON lookup include whoson lookup
979 LOOKUP_*_INCLUDE optional* include files for dynamic module
980 LOOKUP_*_LIBS optional* libraries for dynamic module
981 MAKE_SHELL optional* shell to use for make
982 MAX_FILTER_SIZE optional* max file size for filter files
983 MAX_INCLUDE_SIZE optional* max file size for :include: files
984 MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
985 MAX_NAMED_LIST optional* max named lists of a given type
986 MAX_INTERFACES system maximum network interfaces
987 MSGLOG_DIRECTORY_MODE optional* mode for message log directory
988 MV_COMMAND system path to mv command
989 NO_SYMLINK optional install doesn't make 'exim" symlink
990 PCRE_CONFIG system* use pcre-config for PCRE support
991 PCRE_LIBS system* library for using PCRE
992 PERL_CC system* compiler for Perl interface code
993 PERL_CCOPTS system* flags for same
994 PERL_COMMAND system path to Perl
995 PERL_LIBS system* library for compiling Perl interface
996 PID_FILE_PATH optional path to daemon's pid file
997 RADIUS_CONFIG_FILE optional path to Radius config file
998 RADIUS_LIB_TYPE optional type of RADIUS library
999 RANLIB system** path to ranlib command
1000 RM_COMMAND system path to rm command
1001 ROUTER_ACCEPT driver include accept router
1002 ROUTER_DNSLOOKUP driver include dnslookup router
1003 ROUTER_MANUALROUTE driver include manualroute router
1004 ROUTER_IPLITERAL driver include ipliteral router
1005 ROUTER_IPLOOKUP driver include iplookup router
1006 ROUTER_REDIRECT driver include redirect router
1007 ROUTER_QUERYPROGRAM driver include queryprogram router
1008 SPOOL_DIRECTORY recommended path to spool directory
1009 SPOOL_DIRECTORY_MODE optional mode of spool directory
1010 SPOOL_MODE optional mode of spool files
1011 STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
1012 STRIP_COMMAND optional* can be used to strp binaries
1013 SUPPORT_A6 optional* support A6 DNS records
1014 SUPPORT_CRYPTEQ optional support crypteq (if no auths)
1015 SUPPORT_MAILDIR optional support for maildir delivery
1016 SUPPORT_MAILSTORE optional support for mailstore delivery
1017 SUPPORT_MBX optional support for MBX delivery
1018 SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
1019 SUPPORT_PAM optional support for PAM authentication
1020 SUPPORT_TLS optional support for TLS encryption over SMTP
1021 SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
1022 SYSLOG_LOG_PID optional add pid to syslog lines
1023 SYSLOG_LONG_LINES optional do not split long syslog lines
1024 SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
1025 TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
1026 TIMEZONE_DEFAULT optional default for timezone option
1027 TLS_INCLUDE optional path to include files for TLS
1028 TLS_LIBS optional additional libraries for TLS
1029 EXIM_TMPDIR system value for TMPDIR environment variable
1030 TRANSPORT_APPENDFILE driver include appendfile transport
1031 TRANSPORT_AUTOREPLY driver include autoreply transport
1032 TRANSPORT_LMTP driver include lmtp transport
1033 TRANSPORT_PIPE driver include pipe transport
1034 TRANSPORT_SMTP driver include smtp transport
1035 TRUSTED_CONFIG_LIST optional config files safe to retain privileges
1036 USE_DB system** use native DB interface
1037 USE_GNUTLS optional use GnuTLS instead of OpenSSL
1038 USE_GNUTLS_PC optional probably "gnutls"
1039 USE_OPENSSL_PC optional probably "openssl"
1040 USE_READLINE optional try to load libreadline for -be
1041 USE_TCP_WRAPPERS system link with tcpwrappers
1042 USE_TDB optional use the tdb DB interface
1043 WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
1044 WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
1045 X11 system** X11 base directory
1046 X11_LD_LIB system** X11 link library
1047 XINCLUDE system** X11 include directory
1048 XLFLAGS system** X11 link time flags
1049 ZCAT_COMMAND system path to zcat command
1052 4. BUILD TIME OPTIONS FOR EXIMON
1053 --------------------------------
1055 The table below contains a complete list of options that can be set in
1056 Local/eximon.conf when building the Exim monitor. Where the default is shown as
1057 ** it means that the text string is too long to fit in the table and is instead
1058 given below. A blank default means that there is no default value.
1060 ACTION_OUTPUT=no show output for every action
1061 ACTION_QUEUE_UPDATE=yes update queue display after actions
1062 BODY_MAX=20000 maximum body display
1063 DOMAIN= domain to strip from window title
1064 LOG_BUFFER=20K buffer for log tail
1065 LOG_DEPTH=300 depth of log subwindow
1066 LOG_FONT=** font for log display
1067 LOG_STRIPCHARTS=** patterns for stripcharts
1068 LOG_WIDTH=950 width of log subwindow
1069 MENU_EVENT='Shift<Btn1Down>' keypress for menu
1070 MIN_HEIGHT=162 minimum window height
1071 MIN_WIDTH=103 minimum window width
1072 QUALIFY_DOMAIN= local domain to strip from addresses
1073 QUEUE_DEPTH=200 depth of queue subwindow
1074 QUEUE_FONT=$LOG_FONT font for queue display
1075 QUEUE_INTERVAL=300 queue refresh interval
1076 QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
1077 QUEUE_STRIPCHART_NAME=queue name for queue stripchart
1078 QUEUE_WIDTH=950 width of queue subwindow
1079 SIZE_STRIPCHART= request partition size stripchart
1080 SIZE_STRIPCHART_NAME=space name for size stripchart
1081 START_SMALL=no if yes, start with small window
1082 STRIPCHART_INTERVAL=60 stripchart refresh interval
1083 TEXT_DEPTH=200 depth of text windows
1084 WINDOW_TITLE="${hostname} eximon" window title
1086 The default for LOG_FONT is
1088 LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
1090 and the default for LOG_STRIPCHARTS is
1092 LOG_STRIPCHARTS='/ <= /in/
1094 / => .+ R=local/local/
1095 / => .+ T=[^ ]*smtp/smtp/'
1097 That is, there are four stripcharts, named in, out, local, and smtp. The first
1098 counts message arrivals, the second counts all deliveries, the third counts
1099 deliveries where the router's name starts with "local", and the fourth counts
1100 deliveries where the transport name contains "smtp".
1102 **** End of OptionLists ****
git://git.exim.org / exim.git / blob