Expansions: shortcut hmac expansion during syntax-check phase
[exim.git] / src / OS / Makefile-Base
1 # This file is the basis of the main makefile for Exim and friends. The
2 # makefile at the top level arranges to build the main makefile by calling
3 # scripts/Configure-Makefile from within the build directory. This
4 # concatentates the configuration settings from Local/Makefile and other,
5 # optional, Local/* files at the front of this file, to create Makefile in the
6 # build directory.
7
8 SHELL      = $(MAKE_SHELL)
9 SCRIPTS    = ../scripts
10 O          = ../OS
11 EDITME     = ../Local/Makefile
12 EXIMON_EDITME = ../Local/eximon.conf
13
14 # The compiler used for linking is normally the same as the compiler used for
15 # compiling. However, by giving it a different name, we can override it from
16 # the command line, and this is helpful for certain types of testing.
17
18 LNCC = $(CC)
19
20 # The compile commands can be very long. To make the output look better,
21 # they are not normally echoed in full. To get full echoing, the caller
22 # must set FULLECHO='' on the command line and call make with -e. We default
23 # FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
24
25 FULLECHO = @
26 FE       = $(FULLECHO)
27
28 # The default target double-checks the existence of $(EDITME) and then arranges
29 # to touch it if it exists and any of the optional configuration files, which
30 # depend on the os or the architecture, have been altered. The same sub-target
31 # does the same thing for the eximon configuration file if it exists. Then
32 # there is a check that the Makefile (the one built from this file) is
33 # up-to-date. Then the os-specific source files and the C configuration file
34 # are set up, and finally it goes to the main Exim target.
35
36 all:       utils exim
37 config:    $(EDITME) checklocalmake Makefile os.c config.h version.h
38
39 checklocalmake: 
40         @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
41           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
42           $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
43         then \
44           touch $(EDITME); \
45         fi
46         @if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
47           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
48           $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
49         then \
50           if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
51         fi
52
53 $(EDITME):
54         @echo " "
55         @echo "*** Please create Local/Makefile by copying src/EDITME and making"
56         @echo "*** appropriate changes for your site."
57         @echo " "
58         @false
59
60 $(EXIMON_EDITME):
61         @echo " "
62         @echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
63         @echo "*** appropriate changes for your site."
64         @echo " "
65         @test ! -d ../Local && mkdir ../Local
66         @false
67
68 # Check that the local Makefile is up-to-date
69
70 Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
71           $(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
72         @echo " "
73         @echo "*** Makefile needs rebuilding"
74         @echo "*** Please run \"make makefile\" at top level"
75         @echo " "
76         @false
77
78 # Build (link) the os.h file
79
80 os.h:   $(SCRIPTS)/Configure-os.h \
81         $(O)/os.h-AIX           $(O)/os.h-BSDI  $(O)/os.h-cygwin \
82         $(O)/os.h-Darwin        $(O)/os.h-DGUX  $(O)/os.h-DragonFly \
83         $(O)/os.h-FreeBSD       $(O)/os.h-GNU   $(O)/os.h-GNUkFreeBSD \
84         $(O)/os.h-GNUkNetBSD    $(O)/os.h-HI-OSF \
85         $(O)/os.h-HI-UX         $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \
86         $(O)/os.h-IRIX          $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \
87         $(O)/os.h-IRIX65        $(O)/os.h-Linux $(O)/os.h-mips \
88         $(O)/os.h-NetBSD        $(O)/os.h-NetBSD-a.out \
89         $(O)/os.h-OpenBSD       $(O)/os.h-OpenUNIX      $(O)/os.h-OSF1 \
90         $(O)/os.h-QNX           $(O)/os.h-SCO           $(O)/os.h-SCO_SV \
91         $(O)/os.h-SunOS4        $(O)/os.h-SunOS5        $(O)/os.h-SunOS5-hal \
92         $(O)/os.h-ULTRIX        $(O)/os.h-UNIX_SV \
93         $(O)/os.h-Unixware7     $(O)/os.h-USG
94         $(SHELL) $(SCRIPTS)/Configure-os.h
95
96 # Build the os.c file
97
98 os.c:   ../src/os.c \
99         $(SCRIPTS)/Configure-os.c \
100         $(O)/os.c-cygwin        $(O)/os.c-GNU   $(O)/os.c-HI-OSF \
101         $(O)/os.c-IRIX          $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \
102         $(O)/os.c-IRIX65        $(O)/os.c-Linux $(O)/os.c-OSF1
103         $(SHELL) $(SCRIPTS)/Configure-os.c
104
105 # Build the config.h file.
106
107 config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
108         $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
109
110
111 # This target is recognized specially by GNU make. It records those targets
112 # that do not correspond to files that are being built and which should
113 # therefore always be run, even if the files exist. This shouldn't in fact be a
114 # problem, but it does no harm. Other make programs will just ignore this.
115
116 .PHONY: all config utils \
117         buildauths buildlookups buildpdkim buildrouters \
118         buildtransports checklocalmake clean
119
120
121 utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
122         exigrep eximstats exipick exiqgrep exiqsumm \
123         transport-filter.pl convert4r3 convert4r4 \
124         exim_checkaccess \
125         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
126
127
128 # Targets for special-purpose configuration header builders
129 buildconfig: buildconfig.c
130         @echo "$(CC) buildconfig.c"
131         $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
132
133
134 # Target for the exicyclog utility script
135 exicyclog: config ../src/exicyclog.src
136         @rm -f exicyclog
137         @sed \
138           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
139           -e "/^# /p" \
140           -e "/^# /d" \
141           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
142           -e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
143           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
144           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
145           -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
146           -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
147           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
148           -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
149           -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
150           -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
151           -e "s?MV_COMMAND?$(MV_COMMAND)?" \
152           -e "s?RM_COMMAND?$(RM_COMMAND)?" \
153           -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
154           ../src/exicyclog.src > exicyclog-t
155         @mv exicyclog-t exicyclog
156         @chmod a+x exicyclog
157         @echo ">>> exicyclog script built"
158
159 # Target for the exinext utility script
160 exinext: config ../src/exinext.src
161         @rm -f exinext
162         @sed \
163           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
164           -e "/^# /p" \
165           -e "/^# /d" \
166           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
167           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
168           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
169           ../src/exinext.src > exinext-t
170         @mv exinext-t exinext
171         @chmod a+x exinext
172         @echo ">>> exinext script built"
173
174 # Target for the exiwhat utility script
175 exiwhat: config ../src/exiwhat.src
176         @rm -f exiwhat
177         @sed \
178           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
179           -e "/^# /p" \
180           -e "/^# /d" \
181           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
182           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
183           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
184           -e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
185           -e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
186           -e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
187           -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
188           -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
189           -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
190           ../src/exiwhat.src > exiwhat-t
191         @mv exiwhat-t exiwhat
192         @chmod a+x exiwhat
193         @echo ">>> exiwhat script built"
194
195 # Target for the exim_checkaccess utility script
196 exim_checkaccess: config ../src/exim_checkaccess.src
197         @rm -f exim_checkaccess
198         @sed \
199           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
200           -e "/^# /p" \
201           -e "/^# /d" \
202           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
203           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
204           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
205           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
206           ../src/exim_checkaccess.src > exim_checkaccess-t
207         @mv exim_checkaccess-t exim_checkaccess
208         @chmod a+x exim_checkaccess
209         @echo ">>> exim_checkaccess script built"; echo ""
210
211 # Target for the Exim monitor start-up script
212 eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
213           ../Local/eximon.conf
214         @rm -f eximon
215         $(SHELL) $(SCRIPTS)/Configure-eximon
216         @sed \
217           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
218           -e "/^# /p" \
219           -e "/^# /d" \
220           -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
221           -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
222           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
223           -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
224           -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
225           -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
226           ../src/eximon.src >> eximon
227         @echo ">>> eximon script built"; echo ""
228
229 # Targets for utilities; these are all Perl scripts that have to get the
230 # location of Perl put in them. A few need other things as well.
231
232 exigrep: Makefile ../src/exigrep.src
233         @rm -f exigrep
234         @sed \
235           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
236           -e "/^# /p" \
237           -e "/^# /d" \
238           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
239           -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
240           -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
241           ../src/exigrep.src > exigrep-t
242         @mv exigrep-t exigrep
243         @chmod a+x exigrep
244         @echo ">>> exigrep script built"
245
246 eximstats: Makefile ../src/eximstats.src
247         @rm -f eximstats
248         @sed \
249           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
250           ../src/eximstats.src > eximstats-t
251         @mv eximstats-t eximstats
252         @chmod a+x eximstats
253         @echo ">>> eximstats script built"
254
255 exiqgrep: Makefile ../src/exiqgrep.src
256         @rm -f exiqgrep
257         @sed \
258           -e "s?PROCESSED_FLAG?This file has been so processed.?"\
259           -e "/^# /p" \
260           -e "/^# /d" \
261           -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
262           -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
263           ../src/exiqgrep.src > exiqgrep-t
264         @mv exiqgrep-t exiqgrep
265         @chmod a+x exiqgrep
266         @echo ">>> exiqgrep script built"
267
268 exiqsumm: Makefile ../src/exiqsumm.src
269         @rm -f exiqsumm
270         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
271           ../src/exiqsumm.src > exiqsumm-t
272         @mv exiqsumm-t exiqsumm
273         @chmod a+x exiqsumm
274         @echo ">>> exiqsumm script built"
275
276 exipick: Makefile ../src/exipick.src
277         @rm -f exipick
278         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
279           -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
280           ../src/exipick.src > exipick-t
281         @mv exipick-t exipick
282         @chmod a+x exipick
283         @echo ">>> exipick script built"
284
285 transport-filter.pl: Makefile ../src/transport-filter.src
286         @rm -f transport-filter.pl
287         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
288           ../src/transport-filter.src > transport-filter.pl-t
289         @mv transport-filter.pl-t transport-filter.pl
290         @chmod a+x transport-filter.pl
291         @echo ">>> transport-filter.pl script built"
292
293 convert4r3: Makefile ../src/convert4r3.src
294         @rm -f convert4r3
295         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
296           ../src/convert4r3.src > convert4r3-t
297         @mv convert4r3-t convert4r3
298         @chmod a+x convert4r3
299         @echo ">>> convert4r3 script built"
300
301 convert4r4: Makefile ../src/convert4r4.src
302         @rm -f convert4r4
303         @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
304           ../src/convert4r4.src > convert4r4-t
305         @mv convert4r4-t convert4r4
306         @chmod a+x convert4r4
307         @echo ">>> convert4r4 script built"
308
309
310 # These are objects of optional features. They are always compiled, but
311 # if the corresponding #defines are not set, they wind up empty and
312 # are thrown away by the linker.
313
314 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
315 OBJ_WITH_OLD_DEMIME = demime.o
316 OBJ_EXPERIMENTAL = bmi_spam.o \
317                                 dane.o \
318                                 dcc.o \
319                                 dmarc.o \
320                                 imap_utf7.o \
321                                 spf.o \
322                                 srs.o \
323                                 utf8.o
324
325 # Targets for final binaries; the main one has a build number which is
326 # updated each time. We don't bother with that for the auxiliaries.
327
328 OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
329
330 OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
331         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
332         filtertest.o globals.o dkim.o \
333         header.o host.o ip.o log.o lss.o match.o moan.o \
334         os.o parse.o queue.o \
335         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
336         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
337         std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
338         $(OBJ_LOOKUPS) \
339         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
340         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
341
342 exim:   buildlookups buildauths pdkim/pdkim.a \
343         buildrouters buildtransports \
344         $(OBJ_EXIM) version.o
345         @echo "$(LNCC) -o exim"
346         $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
347           routers/routers.a transports/transports.a lookups/lookups.a \
348           auths/auths.a pdkim/pdkim.a \
349           $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
350           $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
351           $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
352         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
353           echo $(STRIP_COMMAND) exim; \
354           $(STRIP_COMMAND) exim; \
355         fi
356         $(EXIM_CHMOD)
357         @echo " "
358         @echo ">>> exim binary built"
359         @echo " "
360
361 # The utility for dumping the contents of an exim database
362
363 OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
364
365 exim_dumpdb: $(OBJ_DUMPDB)
366         @echo "$(LNCC) -o exim_dumpdb"
367         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
368           $(LIBS) $(EXTRALIBS) $(DBMLIB)
369         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
370           echo $(STRIP_COMMAND) exim_dumpdb; \
371           $(STRIP_COMMAND) exim_dumpdb; \
372         fi
373         @echo ">>> exim_dumpdb utility built"
374         @echo " "
375
376 # The utility for interrogating/fixing the contents of an exim database
377
378 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
379
380 exim_fixdb:  $(OBJ_FIXDB) buildauths
381         @echo "$(LNCC) -o exim_fixdb"
382         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
383           auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
384         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
385           echo $(STRIP_COMMAND) exim_fixdb; \
386           $(STRIP_COMMAND) exim_fixdb; \
387         fi
388         @echo ">>> exim_fixdb utility built"
389         @echo " "
390
391 # The utility for tidying the contents of an exim database
392
393 OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
394
395 exim_tidydb: $(OBJ_TIDYDB)
396         @echo "$(LNCC) -o exim_tidydb"
397         $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
398           $(LIBS) $(EXTRALIBS) $(DBMLIB)
399         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
400           echo $(STRIP_COMMAND) exim_tidydb; \
401           $(STRIP_COMMAND) exim_tidydb; \
402         fi
403         @echo ">>> exim_tidydb utility built"
404         @echo " "
405
406 # The utility for building dbm files
407
408 exim_dbmbuild: exim_dbmbuild.o
409         @echo "$(LNCC) -o exim_dbmbuild"
410         $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
411           $(LIBS) $(EXTRALIBS) $(DBMLIB)
412         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
413           echo $(STRIP_COMMAND) exim_dbmbuild; \
414           $(STRIP_COMMAND) exim_dbmbuild; \
415         fi
416         @echo ">>> exim_dbmbuild utility built"
417         @echo " "
418
419 # The utility for locking a mailbox while messing around with it
420
421 exim_lock: exim_lock.c os.h
422         @echo "$(CC) exim_lock.c"
423         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
424         @echo "$(LNCC) -o exim_lock"
425         $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o  \
426           $(LIBS) $(EXTRALIBS)
427         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
428           echo $(STRIP_COMMAND) exim_lock; \
429           $(STRIP_COMMAND) exim_lock; \
430         fi
431         @echo ">>> exim_lock utility built"
432         @echo " "
433
434 # The X-based Exim monitor program's binary part. There's a macro for cutting
435 # out the modified TextPop module, because some antique link editors cannot
436 # handle the fact that it is redefining things that are found later in the
437 # Xaw library.
438
439 # Object modules that are the unique Eximon modules
440
441 MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
442         em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
443         em_text.o em_xs.o
444
445 # The complete modules list also includes some specially compiled versions of
446 # code from the main Exim source tree.
447
448 OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
449
450 eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
451             ../exim_monitor/em_version.c
452         @echo "$(CC) exim_monitor/em_version.c"
453         $(FE)$(CC) -o em_version.o -c \
454           $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
455         @echo "$(LNCC) -o eximon.bin"
456         $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
457         $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
458           $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
459         @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
460           echo $(STRIP_COMMAND) eximon.bin; \
461           $(STRIP_COMMAND) eximon.bin; \
462         fi
463         @echo ">>> exim monitor binary built"
464         @echo " "
465
466
467 # Compile step for most of the exim modules. HDRS is a list of headers
468 # which cause everthing to be rebuilt. PHDRS is the same, for the use
469 # of routers, transports, and authenticators. I can't find a way of doing this
470 # in one. This list is overkill, but it doesn't really take much time to
471 # rebuild Exim on a modern computer.
472
473 HDRS  = config.h \
474         dbfunctions.h \
475         dbstuff.h \
476         exim.h \
477         functions.h \
478         globals.h \
479         local_scan.h \
480         macros.h \
481         mytypes.h \
482         structs.h \
483         os.h
484 PHDRS = ../config.h \
485         ../dbfunctions.h \
486         ../dbstuff.h \
487         ../exim.h \
488         ../functions.h \
489         ../globals.h \
490         ../local_scan.h \
491         ../macros.h \
492         ../mytypes.h \
493         ../structs.h \
494         ../os.h
495
496 .SUFFIXES: .o .c
497 .c.o:;  @echo "$(CC) $*.c"
498         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
499
500 # Update Exim's version information and build the version object.
501
502 version.h::
503         @../scripts/reversion
504
505 cnumber.h: version.h
506
507 version.o: $(HDRS) cnumber.h version.h version.c
508
509 # This is the dummy module for use by test compiles of individual modules. It
510 # contains functions such as log_write() that may be called from bits of Exim
511 # in the tested code.
512
513 dummies.o:       dummies.c
514
515 # Compile instructions for perl.o for when EXIM_PERL is set
516
517 perl.o:          $(HDRS) perl.c
518         @echo "$(PERL_CC) perl.c"
519         $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
520
521 # Compile instructions for the database utility modules
522
523 exim_dumpdb.o:   $(HDRS) exim_dbutil.c
524         @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
525         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
526                                       -DCOMPILE_UTILITY \
527                                       -DEXIM_DUMPDB \
528                                       -o exim_dumpdb.o exim_dbutil.c
529
530 exim_fixdb.o:    $(HDRS) exim_dbutil.c
531         @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
532         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
533                                       -DCOMPILE_UTILITY \
534                                       -DEXIM_FIXDB \
535                                       -o exim_fixdb.o exim_dbutil.c
536
537 exim_tidydb.o:   $(HDRS) exim_dbutil.c
538         @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
539         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
540                                       -DCOMPILE_UTILITY \
541                                       -DEXIM_TIDYDB \
542                                       -o exim_tidydb.o exim_dbutil.c
543
544 # Compile instructions for exim_dbmbuild
545
546 exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
547         @echo "$(CC) exim_dbmbuild.c"
548         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
549
550 # Utilities use special versions of some modules - typically with debugging
551 # calls cut out.
552
553 util-spool_in.o: $(HDRS) spool_in.c
554         @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
555         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
556
557 util-store.o:    $(HDRS) store.c
558         @echo "$(CC) -DCOMPILE_UTILITY store.c"
559         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
560
561 util-string.o:   $(HDRS) string.c
562         @echo "$(CC) -DCOMPILE_UTILITY string.c"
563         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
564
565 util-os.o:       $(HDRS) os.c
566         @echo "$(CC) -DCOMPILE_UTILITY os.c"
567         $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
568                                       -DCOMPILE_UTILITY \
569                                       -DOS_LOAD_AVERAGE \
570                                       -DFIND_RUNNING_INTERFACES \
571                                       -o util-os.o os.c
572
573 # The local scan module depends only on its own special header, and is compiled
574 # from a source whose location is set by configuration.
575
576 local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
577         @echo "$(CC) local_scan.c"
578         $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
579
580 # Dependencies for the "ordinary" exim modules
581
582 acl.o:           $(HDRS) acl.c
583 base64.o:        $(HDRS) mime.h base64.c
584 child.o:         $(HDRS) child.c
585 crypt16.o:       $(HDRS) crypt16.c
586 daemon.o:        $(HDRS) daemon.c
587 dbfn.o:          $(HDRS) dbfn.c
588 debug.o:         $(HDRS) debug.c
589 deliver.o:       $(HDRS) deliver.c
590 directory.o:     $(HDRS) directory.c
591 dns.o:           $(HDRS) dns.c
592 enq.o:           $(HDRS) enq.c
593 exim.o:          $(HDRS) exim.c
594 expand.o:        $(HDRS) expand.c
595 filter.o:        $(HDRS) filter.c
596 filtertest.o:    $(HDRS) filtertest.c
597 globals.o:       $(HDRS) globals.c
598 header.o:        $(HDRS) header.c
599 host.o:          $(HDRS) host.c
600 ip.o:            $(HDRS) ip.c
601 log.o:           $(HDRS) log.c
602 lss.o:           $(HDRS) lss.c
603 match.o:         $(HDRS) match.c
604 moan.o:          $(HDRS) moan.c
605 os.o:            $(HDRS) os.c
606 parse.o:         $(HDRS) parse.c
607 queue.o:         $(HDRS) queue.c
608 rda.o:           $(HDRS) rda.c
609 readconf.o:      $(HDRS) readconf.c
610 receive.o:       $(HDRS) receive.c
611 retry.o:         $(HDRS) retry.c
612 rewrite.o:       $(HDRS) rewrite.c
613 rfc2047.o:       $(HDRS) rfc2047.c
614 route.o:         $(HDRS) route.c
615 search.o:        $(HDRS) search.c
616 sieve.o:         $(HDRS) sieve.c
617 smtp_in.o:       $(HDRS) smtp_in.c
618 smtp_out.o:      $(HDRS) smtp_out.c
619 spool_in.o:      $(HDRS) spool_in.c
620 spool_out.o:     $(HDRS) spool_out.c
621 std-crypto.o:    $(HDRS) std-crypto.c
622 store.o:         $(HDRS) store.c
623 string.o:        $(HDRS) string.c
624 tls.o:           $(HDRS) tls.c setenv.c \
625                  tls-gnu.c tlscert-gnu.c \
626                  tls-openssl.c tlscert-openssl.c
627 tod.o:           $(HDRS) tod.c
628 transport.o:     $(HDRS) transport.c
629 tree.o:          $(HDRS) tree.c
630 verify.o:        $(HDRS) verify.c
631 dkim.o:          $(HDRS) pdkim/pdkim.h dkim.c
632
633 # Dependencies for WITH_CONTENT_SCAN modules
634
635 malware.o:       $(HDRS) malware.c
636 mime.o:          $(HDRS) mime.h mime.c
637 regex.o:         $(HDRS) regex.c
638 spam.o:          $(HDRS) spam.c
639 spool_mbox.o:    $(HDRS) spool_mbox.c
640
641
642 # Dependencies for WITH_OLD_DEMIME modules
643
644 demime.o:       $(HDRS) demime.c
645
646
647 # Dependencies for EXPERIMENTAL_* modules
648
649 bmi_spam.o:     $(HDRS) bmi_spam.c
650 dane.o:         $(HDRS) dane.c dane-gnu.c dane-openssl.c
651 dcc.o:          $(HDRS) dcc.h dcc.c
652 dmarc.o:        $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
653 imap_utf7.o:    $(HDRS) imap_utf7.c
654 spf.o:          $(HDRS) spf.h spf.c
655 srs.o:          $(HDRS) srs.h srs.c
656 utf8.o:         $(HDRS) utf8.c
657
658 # The module containing tables of available lookups, routers, auths, and
659 # transports must be rebuilt if any of them are. However, because the makefiles
660 # for the drivers are always run, we don't actually put the dependencies here,
661 # because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
662 # drtables.o even though the .a files haven't in fact been updated. Instead
663 # it is arranged that the lower-level makefiles remove drtables.o when they
664 # rebuild the .a files.
665
666 drtables.o:      $(HDRS) drtables.c
667
668 # We depend upon object files built as part of building the lookups library
669 # When using parallel make, we don't have the dependency to force building
670 # in the sub-directory unless we force that dependency:
671
672 $(OBJ_LOOKUPS):  buildlookups
673
674 # The exim monitor's private modules - the sources live in a private
675 # subdirectory. The final binary combines the private modules with some
676 # modules from the main exim binary.
677
678 em_StripChart.o: ../exim_monitor/em_StripChart.c
679 em_TextPop.o:    ../exim_monitor/em_TextPop.c
680 em_globals.o:    ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
681 em_init.o:       ../exim_monitor/em_init.c    ../exim_monitor/em_hdr.h
682 em_log.o:        ../exim_monitor/em_log.c     ../exim_monitor/em_hdr.h
683 em_main.o:       ../exim_monitor/em_main.c    ../exim_monitor/em_hdr.h
684 em_menu.o:       ../exim_monitor/em_menu.c    ../exim_monitor/em_hdr.h
685 em_queue.o:      ../exim_monitor/em_queue.c   ../exim_monitor/em_hdr.h
686 em_strip.o:      ../exim_monitor/em_strip.c   ../exim_monitor/em_hdr.h
687 em_text.o:       ../exim_monitor/em_text.c    ../exim_monitor/em_hdr.h
688 em_xs.o:         ../exim_monitor/em_xs.c      ../exim_monitor/em_hdr.h
689 em_version.o:    ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
690 $(MONBIN): $(HDRS)
691                  @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
692                  $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
693                    ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
694
695
696 # Targets for the various libraries that Exim uses.
697
698 # The lookups library.
699
700 buildlookups: config
701          @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
702            CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
703            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
704            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
705          @echo " "
706
707 # The routers library.
708
709 buildrouters: config
710          @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
711            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
712            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
713          @echo " "
714
715 # The transports library.
716
717 buildtransports: config
718          @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
719            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
720            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
721          @echo " "
722
723 # The library of authorization modules
724
725 buildauths: config
726          @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
727            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
728            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
729          @echo " "
730
731 # The PDKIM library
732
733 buildpdkim: pdkim/pdkim.a
734 pdkim/pdkim.a: config
735          @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
736            FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
737            INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
738          @echo " "
739
740 # The "clean", "install", and "makefile" targets just pass themselves back to
741 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
742 # for them in the build directory.
743
744 clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
745
746 # Targets for building stand-alone testing programs for basic testing of
747 # some of the building blocks. These are not integrated with the makefile-
748 # building targets. If you change something that is going to cause the
749 # makefile to be rebuilt, you must run "make makefile" before running one
750 # of these.
751
752 # The testing programs use different versions of some modules - usually
753 # with bits cut out that are not relevant to the test in hand. For those
754 # that are used by several tests, we use a different name.
755
756 sa-globals.o:    $(HDRS) globals.c
757         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
758
759 sa-os.o:         $(HDRS) os.c
760         $(CC) -c $(CFLAGS) $(INCLUDE) \
761                                       -DFIND_RUNNING_INTERFACES \
762                                       -o sa-os.o os.c
763
764 # These are the test targets themselves
765
766 test_dbfn:   config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
767                string.o tod.o version.o utf8.o
768         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
769         $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
770           dummies.o sa-globals.o sa-os.o store.o string.o \
771           tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
772         rm -f dbfn.o
773
774 test_host:   config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
775                store.o string.o tod.o tree.o
776         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
777         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
778         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
779         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
780         $(LNCC) -o test_host $(LFLAGS) \
781           host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
782           tod.o tree.o $(LIBS) $(LIBRESOLV)
783         rm -f child.o dummies.o host.o dns.o
784
785 test_os:     os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
786         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
787         $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
788           sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
789         rm -f os.o
790
791 test_parse:  config.h parse.c dummies.o sa-globals.o \
792              store.o string.o tod.o version.o utf8.o
793         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
794         $(LNCC) -o test_parse $(LFLAGS) parse.o \
795           dummies.o sa-globals.o store.o string.o tod.o version.o \
796           utf8.o $(LDFLAGS)
797         rm -f parse.o
798
799 test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
800         $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
801         $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
802           dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
803         rm -f string.o
804
805 # End