X-Git-Url: https://git.exim.org/exim-website.git/blobdiff_plain/17a3b8dc6aba094e32f253369866319d9ca12ec0..762fa0dede45fb8c7b168cca8a9542d1b2cb88c2:/docbook/4.85/filter.xml diff --git a/docbook/4.85/filter.xml b/docbook/4.85/filter.xml new file mode 100644 index 0000000..ec40bac --- /dev/null +++ b/docbook/4.85/filter.xml @@ -0,0 +1,2013 @@ + + + + + + + +Exim's interfaces to mail filtering +Exim filtering + +12 Jan 2015 + +PhilipHazel +PH + +4.85 +12 Jan 2015 + PH + + +2014 + University of Cambridge + + +Forwarding and filtering in Exim + +This document describes the user interfaces to Exim’s in-built mail filtering +facilities, and is copyright © University of Cambridge 2014. It +corresponds to Exim version 4.85. + +
+Introduction + +Most Unix mail transfer agents (programs that deliver mail) permit individual +users to specify automatic forwarding of their mail, usually by placing a list +of forwarding addresses in a file called .forward in their home +directories. Exim extends this facility by allowing the forwarding instructions +to be a set of rules rather than just a list of addresses, in effect providing +.forward with conditions. Operating the set of rules is called +filtering, and the file that contains them is called a filter file. + + +Exim supports two different kinds of filter file. An Exim filter contains +instructions in a format that is unique to Exim. A Sieve filter contains +instructions in the Sieve format that is defined by RFC 3028. As this is a +standard format, Sieve filter files may already be familiar to some users. +Sieve files should also be portable between different environments. However, +the Exim filtering facility contains more features (such as variable +expansion), and better integration with the host environment (such as the use +of external processes and pipes). + + +The choice of which kind of filter to use can be left to the end-user, provided +that the system administrator has configured Exim appropriately for both kinds +of filter. However, if interoperability is important, Sieve is the only +choice. + + +The ability to use filtering or traditional forwarding has to be enabled by the +system administrator, and some of the individual facilities can be separately +enabled or disabled. A local document should be provided to describe exactly +what has been enabled. In the absence of this, consult your system +administrator. + + +This document describes how to use a filter file and the format of its +contents. It is intended for use by end-users. Both Sieve filters and Exim +filters are covered. However, for Sieve filters, only issues that relate to the +Exim implementation are discussed, since Sieve itself is described elsewhere. + + +The contents of traditional .forward files are not described here. They +normally contain just a list of addresses, file names, or pipe commands, +separated by commas or newlines, but other types of item are also available. +The full details can be found in the chapter on the redirect router in the +Exim specification, which also describes how the system administrator can set +up and control the use of filtering. + +
+
+Filter operation + +It is important to realize that, in Exim, no deliveries are actually made while +a filter or traditional .forward file is being processed. Running a filter +or processing a traditional .forward file sets up future delivery +operations, but does not carry them out. + + +The result of filter or .forward file processing is a list of destinations +to which a message should be delivered. The deliveries themselves take place +later, along with all other deliveries for the message. This means that it is +not possible to test for successful deliveries while filtering. It also means +that any duplicate addresses that are generated are dropped, because Exim never +delivers the same message to the same address more than once. + +
+
+Testing a new filter file + +Filter files, especially the more complicated ones, should always be tested, as +it is easy to make mistakes. Exim provides a facility for preliminary testing +of a filter file before installing it. This tests the syntax of the file and +its basic operation, and can also be used with traditional .forward files. + + +Because a filter can do tests on the content of messages, a test message is +required. Suppose you have a new filter file called myfilter and a test +message in a file called test-message. Assuming that Exim is installed with +the conventional path name /usr/sbin/sendmail (some operating systems use +/usr/lib/sendmail), the following command can be used: + + +/usr/sbin/sendmail -bf myfilter <test-message + + +The option tells Exim that the following item on the command line is +the name of a filter file that is to be tested. There is also a option, +which is similar, but which is used for testing system filter files, as opposed +to user filter files, and which is therefore of use only to the system +administrator. + + +The test message is supplied on the standard input. If there are no +message-dependent tests in the filter, an empty file (/dev/null) can be +used. A supplied message must start with header lines or the From  message +separator line that is found in many multi-message folder files. Note that +blank lines at the start terminate the header lines. A warning is given if no +header lines are read. + + +The result of running this command, provided no errors are detected in the +filter file, is a list of the actions that Exim would try to take if presented +with the message for real. For example, for an Exim filter, the output + + +Deliver message to: gulliver@lilliput.fict.example +Save message to: /home/lemuel/mail/archive + + +means that one copy of the message would be sent to +gulliver@lilliput.fict.example, and another would be added to the file +/home/lemuel/mail/archive, if all went well. + + +The actions themselves are not attempted while testing a filter file in this +way; there is no check, for example, that any forwarding addresses are valid. +For an Exim filter, if you want to know why a particular action is being taken, +add the option to the command. This causes Exim to output the results of +any conditional tests and to indent its output according to the depth of +nesting of if commands. Further additional output from a filter test can be +generated by the testprint command, which is described below. + + +When Exim is outputting a list of the actions it would take, if any text +strings are included in the output, non-printing characters therein are +converted to escape sequences. In particular, if any text string contains a +newline character, this is shown as \n in the testing output. + + +When testing a filter in this way, Exim makes up an envelope for the +message. The recipient is by default the user running the command, and so is +the sender, but the command can be run with the option to supply a +different sender. For example, + + +/usr/sbin/sendmail -bf myfilter \ + -f islington@never.where <test-message + + +Alternatively, if the option is not used, but the first line of the +supplied message is a From  separator from a message folder file (not the +same thing as a From: header line), the sender is taken from there. If + is present, the contents of any From  line are ignored. + + +The return path is the same as the envelope sender, unless the message +contains a Return-path: header, in which case it is taken from there. You +need not worry about any of this unless you want to test out features of a +filter file that rely on the sender address or the return path. + + +It is possible to change the envelope recipient by specifying further options. +The option changes the domain of the recipient address, while the + option changes the local part, that is, the part before the @ +sign. An adviser could make use of these to test someone else’s filter file. + + +The and options specify the prefix or suffix for the local +part. These are relevant only when support for multiple personal mailboxes is +implemented; see the description in section below. + +
+
+Installing a filter file + +A filter file is normally installed under the name .forward in your home +directory – it is distinguished from a conventional .forward file by its +first line (described below). However, the file name is configurable, and some +system administrators may choose to use some different name or location for +filter files. + +
+
+Testing an installed filter file + +Testing a filter file before installation cannot find every potential problem; +for example, it does not actually run commands to which messages are piped. +Some live tests should therefore also be done once a filter is installed. + + +If at all possible, test your filter file by sending messages from some other +account. If you send a message to yourself from the filtered account, and +delivery fails, the error message will be sent back to the same account, which +may cause another delivery failure. It won’t cause an infinite sequence of such +messages, because delivery failure messages do not themselves generate further +messages. However, it does mean that the failure won’t be returned to you, and +also that the postmaster will have to investigate the stuck message. + + +If you have to test an Exim filter from the same account, a sensible precaution +is to include the line + + +if error_message then finish endif + + +as the first filter command, at least while testing. This causes filtering to +be abandoned for a delivery failure message, and since no destinations are +generated, the message goes on to be delivered to the original address. Unless +there is a good reason for not doing so, it is recommended that the above test +be left in all Exim filter files. (This does not apply to Sieve files.) + +
+
+Details of filtering commands + +The filtering commands for Sieve and Exim filters are completely different in +syntax and semantics. The Sieve mechanism is defined in RFC 3028; in the next +chapter we describe how it is integrated into Exim. The subsequent chapter +covers Exim filtering commands in detail. + +
+ + + +Sieve filter files + +The code for Sieve filtering in Exim was contributed by Michael Haardt, and +most of the content of this chapter is taken from the notes he provided. Since +Sieve is an extensible language, it is important to understand Sieve in +this context as the specific implementation of Sieve for Exim. + + +This chapter does not contain a description of Sieve, since that can be found +in RFC 3028, which should be read in conjunction with these notes. + + +The Exim Sieve implementation offers the core as defined by RFC 3028, +comparison tests, the subaddress parameter, the copy, envelope, +fileinto, notify, and vacation extensions, but not the reject +extension. Exim does not support message delivery notifications (MDNs), so +adding it just to the Sieve filter (as required for reject) makes little +sense. + + +In order for Sieve to work properly in Exim, the system administrator needs to +make some adjustments to the Exim configuration. These are described in the +chapter on the redirect router in the full Exim specification. + +
+Recognition of Sieve filters + +A filter file is interpreted as a Sieve filter if its first line is + + +# Sieve filter + + +This is what distinguishes it from a conventional .forward file or an Exim +filter file. + +
+
+Saving to specified folders + +If the system administrator has set things up as suggested in the Exim +specification, and you use keep or fileinto to save a mail into a +folder, absolute files are stored where specified, relative files are stored +relative to $home, and inbox goes to the standard mailbox location. + +
+
+Strings containing header names + +RFC 3028 does not specify what happens if a string denoting a header field does +not contain a valid header name, for example, it contains a colon. This +implementation generates an error instead of ignoring the header field in order +to ease script debugging, which fits in with the common picture of Sieve. + +
+
+Exists test with empty list of headers + +The exists test succeeds only if all the specified headers exist. RFC 3028 +does not explicitly specify what happens on an empty list of headers. This +implementation evaluates that condition as true, interpreting the RFC in a +strict sense. + +
+
+Header test with invalid MIME encoding in header + +Some MUAs process invalid base64 encoded data, generating junk. Others ignore +junk after seeing an equal sign in base64 encoded data. RFC 2047 does not +specify how to react in this case, other than stating that a client must not +forbid to process a message for that reason. RFC 2045 specifies that invalid +data should be ignored (apparently looking at end of line characters). It also +specifies that invalid data may lead to rejecting messages containing them (and +there it appears to talk about true encoding violations), which is a clear +contradiction to ignoring them. + + +RFC 3028 does not specify how to process incorrect MIME words. This +implementation treats them literally, as it does if the word is correct but its +character set cannot be converted to UTF-8. + +
+
+Address test for multiple addresses per header + +A header may contain multiple addresses. RFC 3028 does not explicitly specify +how to deal with them, but since the address test checks if anything matches +anything else, matching one address suffices to satisfy the condition. That +makes it impossible to test if a header contains a certain set of addresses and +no more, but it is more logical than letting the test fail if the header +contains an additional address besides the one the test checks for. + +
+
+Semantics of keep + +The keep command is equivalent to + + +fileinto "inbox"; + + +It saves the message and resets the implicit keep flag. It does not set the +implicit keep flag; there is no command to set it once it has been reset. + +
+
+Semantics of fileinto + +RFC 3028 does not specify whether fileinto should try to create a mail +folder if it does not exist. This implementation allows the sysadmin to +configure that aspect using the appendfile transport options +, , and . See the +appendfile transport in the Exim specification for details. + +
+
+Semantics of redirect + +Sieve scripts are supposed to be interoperable between servers, so this +implementation does not allow mail to be redirected to unqualified addresses, +because the domain would depend on the system being used. On systems with +virtual mail domains, the default domain is probably not what the user expects +it to be. + +
+
+String arguments + +There has been confusion if the string arguments to require are to be +matched case-sensitively or not. This implementation matches them with the +match type :is (default, see section 2.7.1 of the RFC) and the comparator +i;ascii-casemap (default, see section 2.7.3 of the RFC). The RFC defines +the command defaults clearly, so any different implementations violate RFC +3028. The same is valid for comparator names, also specified as strings. + +
+
+Number units + +There is a mistake in RFC 3028: the suffix G denotes gibi-, not tebibyte. +The mistake is obvious, because RFC 3028 specifies G to denote 2^30 +(which is gibi, not tebi), and that is what this implementation uses as +the scaling factor for the suffix G. + +
+
+RFC compliance + +Exim requires the first line of a Sieve filter to be + + +# Sieve filter + + +Of course the RFC does not specify that line. Do not expect examples to work +without adding it, though. + + +RFC 3028 requires the use of CRLF to terminate a line. The rationale was that +CRLF is universally used in network protocols to mark the end of the line. This +implementation does not embed Sieve in a network protocol, but uses Sieve +scripts as part of the Exim MTA. Since all parts of Exim use LF as the newline +character, this implementation does, too, by default, though the system +administrator may choose (at Exim compile time) to use CRLF instead. + + +Exim violates RFC 2822, section 3.6.8, by accepting 8-bit header names, so this +implementation repeats this violation to stay consistent with Exim. This is in +preparation for UTF-8 data. + + +Sieve scripts cannot contain NUL characters in strings, but mail headers could +contain MIME encoded NUL characters, which could never be matched by Sieve +scripts using exact comparisons. For that reason, this implementation extends +the Sieve quoted string syntax with \0 to describe a NUL character, violating +\0 being the same as 0 in RFC 3028. Even without using \0, the following tests +are all true in this implementation. Implementations that use C-style strings +will only evaluate the first test as true. + + +Subject: =?iso-8859-1?q?abc=00def + +header :contains "Subject" ["abc"] +header :contains "Subject" ["def"] +header :matches "Subject" ["abc?def"] + + +Note that by considering Sieve to be an MUA, RFC 2047 can be interpreted in a +way that NUL characters truncating strings is allowed for Sieve +implementations, although not recommended. It is further allowed to use encoded +NUL characters in headers, but that’s not recommended either. The above example +shows why. + + +RFC 3028 states that if an implementation fails to convert a character set to +UTF-8, two strings cannot be equal if one contains octets greater than 127. +Assuming that all unknown character sets are one-byte character sets with the +lower 128 octets being US-ASCII is not sound, so this implementation violates +RFC 3028 and treats such MIME words literally. That way at least something +could be matched. + + +The folder specified by fileinto must not contain the character sequence +.. to avoid security problems. RFC 3028 does not specify the syntax of +folders apart from keep being equivalent to + + +fileinto "INBOX"; + + +This implementation uses inbox instead. + + +Sieve script errors currently cause messages to be silently filed into +inbox. RFC 3028 requires that the user is notified of that condition. +This may be implemented in the future by adding a header line to mails that +are filed into inbox due to an error in the filter. + +
+ + + +Exim filter files + +This chapter contains a full description of the contents of Exim filter files. + +
+Format of Exim filter files + +Apart from leading white space, the first text in an Exim filter file must be + + +# Exim filter + + +This is what distinguishes it from a conventional .forward file or a Sieve +filter file. If the file does not have this initial line (or the equivalent for +a Sieve filter), it is treated as a conventional .forward file, both when +delivering mail and when using the testing mechanism. The white space +in the line is optional, and any capitalization may be used. Further text on +the same line is treated as a comment. For example, you could have + + +# Exim filter <<== do not edit or remove this line! + + +The remainder of the file is a sequence of filtering commands, which consist of +keywords and data values. For example, in the command + + +deliver gulliver@lilliput.fict.example + + +the keyword is deliver and the data value is +gulliver@lilliput.fict.example. White space or line breaks separate the +components of a command, except in the case of conditions for the if +command, where round brackets (parentheses) also act as separators. Complete +commands are separated from each other by white space or line breaks; there are +no special terminators. Thus, several commands may appear on one line, or one +command may be spread over a number of lines. + + +If the character # follows a separator anywhere in a command, everything from +# up to the next newline is ignored. This provides a way of including comments +in a filter file. + +
+
+Data values in filter commands + +There are two ways in which a data value can be input: + + + + +If the text contains no white space, it can be typed verbatim. However, if it +is part of a condition, it must also be free of round brackets (parentheses), +as these are used for grouping in conditions. + + + + +Otherwise, text must be enclosed in double quotation marks. In this case, the +character \ (backslash) is treated as an escape character within the +string, causing the following character or characters to be treated specially: + + +\n is replaced by a newline +\r is replaced by a carriage return +\t is replaced by a tab + + + + +Backslash followed by up to three octal digits is replaced by the character +specified by those digits, and \x followed by up to two hexadecimal digits +is treated similarly. Backslash followed by any other character is replaced by +the second character, so that in particular, \" becomes " and \\ +becomes \. A data item enclosed in double quotes can be continued onto the +next line by ending the first line with a backslash. Any leading white space at +the start of the continuation line is ignored. + + +In addition to the escape character processing that occurs when strings are +enclosed in quotes, most data values are also subject to string expansion +(as described in the next section), in which case the characters $ and +\ are also significant. This means that if a single backslash is actually +required in such a string, and the string is also quoted, \\\\ has to be +entered. + + +The maximum permitted length of a data string, before expansion, is 1024 +characters. + +
+
+String expansion + +Most data values are expanded before use. Expansion consists of replacing +substrings beginning with $ with other text. The full expansion facilities +available in Exim are extensive. If you want to know everything that Exim can +do with strings, you should consult the chapter on string expansion in the Exim +documentation. + + +In filter files, by far the most common use of string expansion is the +substitution of the contents of a variable. For example, the substring + + +$reply_address + + +is replaced by the address to which replies to the message should be sent. If +such a variable name is followed by a letter or digit or underscore, it must be +enclosed in curly brackets (braces), for example, + + +${reply_address} + + +If a $ character is actually required in an expanded string, it must be +escaped with a backslash, and because backslash is also an escape character in +quoted input strings, it must be doubled in that case. The following two +examples illustrate two different ways of testing for a $ character in a +message: + + +if $message_body contains \$ then ... +if $message_body contains "\\$" then ... + + +You can prevent part of a string from being expanded by enclosing it between +two occurrences of \N. For example, + + +if $message_body contains \N$$$$\N then ... + + +tests for a run of four dollar characters. + +
+
+Some useful general variables + +A complete list of the available variables is given in the Exim documentation. +This shortened list contains the ones that are most likely to be useful in +personal filter files: + + +$body_linecount: The number of lines in the body of the message. + + +$body_zerocount: The number of binary zero characters in the body of the +message. + + +$home: In conventional configurations, this variable normally contains the +user’s home directory. The system administrator can, however, change this. + + +$local_part: The part of the email address that precedes the @ sign – +normally the user’s login name. If support for multiple personal mailboxes is +enabled (see section below) and a prefix or suffix for the local +part was recognized, it is removed from the string in this variable. + + +$local_part_prefix: If support for multiple personal mailboxes is enabled +(see section below), and a local part prefix was recognized, +this variable contains the prefix. Otherwise it contains an empty string. + + +$local_part_suffix: If support for multiple personal mailboxes is enabled +(see section below), and a local part suffix was recognized, +this variable contains the suffix. Otherwise it contains an empty string. + + +$message_body: The initial portion of the body of the message. By default, +up to 500 characters are read into this variable, but the system administrator +can configure this to some other value. Newlines in the body are converted into +single spaces. + + +$message_body_end: The final portion of the body of the message, formatted +and limited in the same way as $message_body. + + +$message_body_size: The size of the body of the message, in bytes. + + +$message_exim_id: The message’s local identification string, which is unique +for each message handled by a single host. + + +$message_headers: The header lines of the message, concatenated into a +single string, with newline characters between them. + + +$message_size: The size of the entire message, in bytes. + + +$original_local_part: When an address that arrived with the message is +being processed, this contains the same value as the variable $local_part. +However, if an address generated by an alias, forward, or filter file is being +processed, this variable contains the local part of the original address. + + +$reply_address: The contents of the Reply-to: header, if the message +has one; otherwise the contents of the From: header. It is the address to +which normal replies to the message should be sent. + + +$return_path: The return path – that is, the sender field that will be +transmitted as part of the message’s envelope if the message is sent to another +host. This is the address to which delivery errors are sent. In many cases, +this variable has the same value as $sender_address, but if, for example, +an incoming message to a mailing list has been expanded, $return_path may +have been changed to contain the address of the list maintainer. + + +$sender_address: The sender address that was received in the envelope of +the message. This is not necessarily the same as the contents of the From: +or Sender: header lines. For delivery error messages (bounce messages) +there is no sender address, and this variable is empty. + + +$tod_full: A full version of the time and date, for example: Wed, 18 Oct +1995 09:51:40 +0100. The timezone is always given as a numerical offset from +GMT. + + +$tod_log: The time and date in the format used for writing Exim’s log files, +without the timezone, for example: 1995-10-12 15:32:29. + + +$tod_zone: The local timezone offset, for example: +0100. + +
+
+Header variables + +There is a special set of expansion variables containing the header lines of +the message being processed. These variables have names beginning with +$header_ followed by the name of the header line, terminated by a colon. +For example, + + +$header_from: +$header_subject: + + +The whole item, including the terminating colon, is replaced by the contents of +the message header line. If there is more than one header line with the same +name, their contents are concatenated. For header lines whose data consists of +a list of addresses (for example, From: and To:), a comma and newline +is inserted between each set of data. For all other header lines, just a +newline is used. + + +Leading and trailing white space is removed from header line data, and if there +are any MIME words that are encoded as defined by RFC 2047 (because they +contain non-ASCII characters), they are decoded and translated, if possible, to +a local character set. Translation is attempted only on operating systems that +have the iconv() function. This makes the header line look the same as it +would when displayed by an MUA. The default character set is ISO-8859-1, but +this can be changed by means of the headers command (see below). + + +If you want to see the actual characters that make up a header line, you can +specify $rheader_ instead of $header_. This inserts the raw +header line, unmodified. + + +There is also an intermediate form, requested by $bheader_, which removes +leading and trailing space and decodes MIME words, but does not do any +character translation. If an attempt to decode what looks superficially like a +MIME word fails, the raw string is returned. If decoding produces a binary +zero character, it is replaced by a question mark. + + +The capitalization of the name following $header_ is not significant. +Because any printing character except colon may appear in the name of a +message’s header (this is a requirement of RFC 2822, the document that +describes the format of a mail message) curly brackets must not be used in +this case, as they will be taken as part of the header name. Two shortcuts are +allowed in naming header variables: + + + + +The initiating $header_, $rheader_, or $bheader_ can be +abbreviated to $h_, $rh_, or $bh_, respectively. + + + + +The terminating colon can be omitted if the next character is white space. The +white space character is retained in the expanded string. However, this is not +recommended, because it makes it easy to forget the colon when it really is +needed. + + + + +If the message does not contain a header of the given name, an empty string is +substituted. Thus it is important to spell the names of headers correctly. Do +not use $header_Reply_to when you really mean $header_Reply-to. + +
+
+User variables + +There are ten user variables with names $n0 – $n9 that can be +incremented by the add command (see section ). These can be +used for scoring messages in various ways. If Exim is configured to run a +system filter on every message, the values left in these variables are +copied into the variables $sn0 – $sn9 at the end of the system filter, +thus making them available to users’ filter files. How these values are used is +entirely up to the individual installation. + +
+
+Current directory + +The contents of your filter file should not make any assumptions about the +current directory. It is best to use absolute paths for file names; you can +normally make use of the $home variable to refer to your home directory. The +save command automatically inserts $home at the start of non-absolute +paths. + +
+
+Significant deliveries + +When in the course of delivery a message is processed by a filter file, what +happens next, that is, after the filter file has been processed, depends on +whether or not the filter sets up any significant deliveries. If at least +one significant delivery is set up, the filter is considered to have handled +the entire delivery arrangements for the current address, and no further +processing of the address takes place. If, however, no significant deliveries +are set up, Exim continues processing the current address as if there were no +filter file, and typically sets up a delivery of a copy of the message into a +local mailbox. In particular, this happens in the special case of a filter file +containing only comments. + + +The delivery commands deliver, save, and pipe are by default +significant. However, if such a command is preceded by the word unseen, its +delivery is not considered to be significant. In contrast, other commands such +as mail and vacation do not set up significant deliveries unless +preceded by the word seen. The following example commands set up +significant deliveries: + + +deliver jack@beanstalk.example +pipe $home/bin/mymailscript +seen mail subject "message discarded" +seen finish + + +The following example commands do not set up significant deliveries: + + +unseen deliver jack@beanstalk.example +unseen pipe $home/bin/mymailscript +mail subject "message discarded" +finish + +
+
+Filter commands + +The filter commands that are described in subsequent sections are listed +below, with the section in which they are described in brackets: + + + + + + + +add +  increment a user variable (section ) + + +deliver +  deliver to an email address (section ) + + +fail +  force delivery failure (sysadmin use) (section ) + + +finish +  end processing (section ) + + +freeze +  freeze message (sysadmin use) (section ) + + +headers +  set the header character set (section ) + + +if +  test condition(s) (section ) + + +logfile +  define log file (section ) + + +logwrite +  write to log file (section ) + + +mail +  send a reply message (section ) + + +pipe +  pipe to a command (section ) + + +save +  save to a file (section ) + + +testprint +  print while testing (section ) + + +vacation +  tailored form of mail (section ) + + + + + +The headers command has additional parameters that can be used only in a +system filter. The fail and freeze commands are available only when +Exim’s filtering facilities are being used as a system filter, and are +therefore usable only by the system administrator and not by ordinary users. +They are mentioned only briefly in this document; for more information, see the +main Exim specification. + +
+
+The add command + + add <number> to <user variable> +e.g. add 2 to n3 + + +There are 10 user variables of this type, with names $n0 – $n9. Their +values can be obtained by the normal expansion syntax (for example $n3) in +other commands. At the start of filtering, these variables all contain zero. +Both arguments of the add command are expanded before use, making it +possible to add variables to each other. Subtraction can be obtained by adding +negative numbers. + +
+
+The deliver command + + deliver <mail address> +e.g. deliver "Dr Livingstone <David@somewhere.africa.example>" + + +This command provides a forwarding operation. The delivery that it sets up is +significant unless the command is preceded by unseen (see section +). The message is sent on to the given address, exactly as +happens if the address had appeared in a traditional .forward file. If you +want to deliver the message to a number of different addresses, you can use +more than one deliver command (each one may have only one address). +However, duplicate addresses are discarded. + + +To deliver a copy of the message to your normal mailbox, your login name can be +given as the address. Once an address has been processed by the filtering +mechanism, an identical generated address will not be so processed again, so +doing this does not cause a loop. + + +However, if you have a mail alias, you should not refer to it here. For +example, if the mail address L.Gulliver is aliased to lg303 then all +references in Gulliver’s .forward file should be to lg303. A reference +to the alias will not work for messages that are addressed to that alias, +since, like .forward file processing, aliasing is performed only once on an +address, in order to avoid looping. + + +Following the new address, an optional second address, preceded by +errors_to may appear. This changes the address to which delivery errors on +the forwarded message will be sent. Instead of going to the message’s original +sender, they go to this new address. For ordinary users, the only value that is +permitted for this address is the user whose filter file is being processed. +For example, the user lg303 whose mailbox is in the domain +lilliput.example could have a filter file that contains + + +deliver jon@elsewhere.example errors_to lg303@lilliput.example + + +Clearly, using this feature makes sense only in situations where not all +messages are being forwarded. In particular, bounce messages must not be +forwarded in this way, as this is likely to create a mail loop if something +goes wrong. + +
+
+The save command + + save <file name> +e.g. save $home/mail/bookfolder + + +This command specifies that a copy of the message is to be appended to the +given file (that is, the file is to be used as a mail folder). The delivery +that save sets up is significant unless the command is preceded by +unseen (see section ). + + +More than one save command may be obeyed; each one causes a copy of the +message to be written to its argument file, provided they are different +(duplicate save commands are ignored). + + +If the file name does not start with a / character, the contents of the +$home variable are prepended, unless it is empty, or the system +administrator has disabled this feature. In conventional configurations, this +variable is normally set in a user filter to the user’s home directory, but the +system administrator may set it to some other path. In some configurations, +$home may be unset, or prepending may be disabled, in which case a +non-absolute path name may be generated. Such configurations convert this to an +absolute path when the delivery takes place. In a system filter, $home is +never set. + + +The user must of course have permission to write to the file, and the writing +of the file takes place in a process that is running as the user, under the +user’s primary group. Any secondary groups to which the user may belong are not +normally taken into account, though the system administrator can configure Exim +to set them up. In addition, the ability to use this command at all is +controlled by the system administrator – it may be forbidden on some systems. + + +An optional mode value may be given after the file name. The value for the mode +is interpreted as an octal number, even if it does not begin with a zero. For +example: + + +save /some/folder 640 + + +This makes it possible for users to override the system-wide mode setting for +file deliveries, which is normally 600. If an existing file does not have the +correct mode, it is changed. + + +An alternative form of delivery may be enabled on your system, in which each +message is delivered into a new file in a given directory. If this is the case, +this functionality can be requested by giving the directory name terminated by +a slash after the save command, for example + + +save separated/messages/ + + +There are several different formats for such deliveries; check with your system +administrator or local documentation to find out which (if any) are available +on your system. If this functionality is not enabled, the use of a path name +ending in a slash causes an error. + +
+
+The pipe command + + pipe <command> +e.g. pipe "$home/bin/countmail $sender_address" + + +This command specifies that the message is to be delivered to the specified +command using a pipe. The delivery that it sets up is significant unless the +command is preceded by unseen (see section ). Remember, +however, that no deliveries are done while the filter is being processed. All +deliveries happen later on. Therefore, the result of running the pipe is not +available to the filter. + + +When the deliveries are done, a separate process is run, and a copy of the +message is passed on its standard input. The process runs as the user, under +the user’s primary group. Any secondary groups to which the user may belong are +not normally taken into account, though the system administrator can configure +Exim to set them up. More than one pipe command may appear; each one causes +a copy of the message to be written to its argument pipe, provided they are +different (duplicate pipe commands are ignored). + + +When the time comes to transport the message, the command supplied to pipe +is split up by Exim into a command name and a number of arguments. These are +delimited by white space except for arguments enclosed in double quotes, in +which case backslash is interpreted as an escape, or in single quotes, in which +case no escaping is recognized. Note that as the whole command is normally +supplied in double quotes, a second level of quoting is required for internal +double quotes. For example: + + +pipe "$home/myscript \"size is $message_size\"" + + +String expansion is performed on the separate components after the line has +been split up, and the command is then run directly by Exim; it is not run +under a shell. Therefore, substitution cannot change the number of arguments, +nor can quotes, backslashes or other shell metacharacters in variables cause +confusion. + + +Documentation for some programs that are normally run via this kind of pipe +often suggest that the command should start with + + +IFS=" " + + +This is a shell command, and should not be present in Exim filter files, +since it does not normally run the command under a shell. + + +However, there is an option that the administrator can set to cause a shell to +be used. In this case, the entire command is expanded as a single string and +passed to the shell for interpretation. It is recommended that this be avoided +if at all possible, since it can lead to problems when inserted variables +contain shell metacharacters. + + +The default PATH set up for the command is determined by the system +administrator, usually containing at least /bin and /usr/bin so that +common commands are available without having to specify an absolute file name. +However, it is possible for the system administrator to restrict the pipe +facility so that the command name must not contain any / characters, and must +be found in one of the directories in the configured PATH. It is also possible +for the system administrator to lock out the use of the pipe command +altogether. + + +When the command is run, a number of environment variables are set up. The +complete list for pipe deliveries may be found in the Exim reference manual. +Those that may be useful for pipe deliveries from user filter files are: + + +DOMAIN the domain of the address +HOME your home directory +LOCAL_PART see below +LOCAL_PART_PREFIX see below +LOCAL_PART_SUFFIX see below +LOGNAME your login name +MESSAGE_ID the unique id of the message +PATH the command search path +RECIPIENT the complete recipient address +SENDER the sender of the message +SHELL /bin/sh +USER see below + + +LOCAL_PART, LOGNAME, and USER are all set to the same value, namely, your login +id. LOCAL_PART_PREFIX and LOCAL_PART_SUFFIX may be set if Exim is configured to +recognize prefixes or suffixes in the local parts of addresses. For example, a +message addressed to pat-suf2@domain.example may cause the filter for user +pat to be run. If this sets up a pipe delivery, LOCAL_PART_SUFFIX is +-suf2 when the pipe command runs. The system administrator has to configure +Exim specially for this feature to be available. + + +If you run a command that is a shell script, be very careful in your use of +data from the incoming message in the commands in your script. RFC 2822 is very +generous in the characters that are permitted to appear in mail addresses, and +in particular, an address may begin with a vertical bar or a slash. For this +reason you should always use quotes round any arguments that involve data from +the message, like this: + + +/some/command '$SENDER' + + +so that inserted shell meta-characters do not cause unwanted effects. + + +Remember that, as was explained earlier, the pipe command is not run at the +time the filter file is interpreted. The filter just defines what deliveries +are required for one particular addressee of a message. The deliveries +themselves happen later, once Exim has decided everything that needs to be done +for the message. + + +A consequence of this is that you cannot inspect the return code from the pipe +command from within the filter. Nevertheless, the code returned by the command +is important, because Exim uses it to decide whether the delivery has succeeded +or failed. + + +The command should return a zero completion code if all has gone well. Most +non-zero codes are treated by Exim as indicating a failure of the pipe. This is +treated as a delivery failure, causing the message to be returned to its +sender. However, there are some completion codes that are treated as temporary +errors. The message remains on Exim’s spool disk, and the delivery is tried +again later, though it will ultimately time out if the delivery failures go on +too long. The completion codes to which this applies can be specified by the +system administrator; the default values are 73 and 75. + + +The pipe command should not normally write anything to its standard output or +standard error file descriptors. If it does, whatever is written is normally +returned to the sender of the message as a delivery error, though this action +can be varied by the system administrator. + +
+
+Mail commands + +There are two commands that cause the creation of a new mail message, neither +of which count as a significant delivery unless the command is preceded by the +word seen (see section ). This is a powerful facility, but +it should be used with care, because of the danger of creating infinite +sequences of messages. The system administrator can forbid the use of these +commands altogether. + + +To help prevent runaway message sequences, these commands have no effect when +the incoming message is a bounce (delivery error) message, and messages sent by +this means are treated as if they were reporting delivery errors. Thus, they +should never themselves cause a bounce message to be returned. The basic +mail-sending command is + + +mail [to <address-list>] + [cc <address-list>] + [bcc <address-list>] + [from <address>] + [reply_to <address>] + [subject <text>] + [extra_headers <text>] + [text <text>] + [[expand] file <filename>] + [return message] + [log <log file name>] + [once <note file name>] + [once_repeat <time interval>] +e.g. mail text "Your message about $h_subject: has been received" + + +Each <address-list> can contain a number of addresses, separated by commas, +in the format of a To: or Cc: header line. In fact, the text you supply +here is copied exactly into the appropriate header line. It may contain +additional information as well as email addresses. For example: + + +mail to "Julius Caesar <jc@rome.example>, \ + <ma@rome.example> (Mark A.)" + + +Similarly, the texts supplied for and are copied into +their respective header lines. + + +As a convenience for use in one common case, there is also a command called +vacation. It behaves in the same way as mail, except that the defaults +for the , , , , and options +are + + +subject "On vacation" +expand file .vacation.msg +log .vacation.log +once .vacation +once_repeat 7d + + +respectively. These are the same file names and repeat period used by the +traditional Unix vacation command. The defaults can be overridden by +explicit settings, but if a file name is given its contents are expanded only +if explicitly requested. + + +Warning: The vacation command should always be used conditionally, +subject to at least the personal condition (see section +below) so as not to send automatic replies to non-personal messages from +mailing lists or elsewhere. Sending an automatic response to a mailing list or +a mailing list manager is an Internet Sin. + + +For both commands, the key/value argument pairs can appear in any order. At +least one of or must appear (except with vacation, where +there is a default for ); if both are present, the text string appears +first in the message. If precedes , each line of the file is +subject to string expansion before it is included in the message. + + +Several lines of text can be supplied to by including the escape +sequence \n in the string wherever a newline is required. If the command is +output during filter file testing, newlines in the text are shown as \n. + + +Note that the keyword for creating a Reply-To: header is , +because Exim keywords may contain underscores, but not hyphens. If the +keyword is present and the given address does not match the user who owns the +forward file, Exim normally adds a Sender: header to the message, though it +can be configured not to do this. + + +The keyword allows you to add custom header lines to the +message. The text supplied must be one or more syntactically valid RFC 2822 +header lines. You can use \n within quoted text to specify newlines between +headers, and also to define continued header lines. For example: + + +extra_headers "h1: first\nh2: second\n continued\nh3: third" + + +No newline should appear at the end of the final header line. + + +If no argument appears, the message is sent to the address in the +$reply_address variable (see section above). +An In-Reply-To: header is automatically included in the created message, +giving a reference to the message identification of the incoming message. + + +If is specified, the incoming message that caused the filter +file to be run is added to the end of the message, subject to a maximum size +limitation. + + +If a log file is specified, a line is added to it for each message sent. + + +If a file is specified, it is used to hold a database for remembering +who has received a message, and no more than one message is ever sent to any +particular address, unless is set. This specifies a time +interval after which another copy of the message is sent. The interval is +specified as a sequence of numbers, each followed by the initial letter of one +of seconds, minutes, hours, days, or weeks. For example, + + +once_repeat 5d4h + + +causes a new message to be sent if at least 5 days and 4 hours have elapsed +since the last one was sent. There must be no white space in a time interval. + + +Commonly, the file name specified for is used as the base name for +direct-access (DBM) file operations. There are a number of different DBM +libraries in existence. Some operating systems provide one as a default, but +even in this case a different one may have been used when building Exim. With +some DBM libraries, specifying results in two files being created, +with the suffixes .dir and .pag being added to the given name. With +some others a single file with the suffix .db is used, or the name is used +unchanged. + + +Using a DBM file for implementing the feature means that the file +grows as large as necessary. This is not usually a problem, but some system +administrators want to put a limit on it. The facility can be configured not to +use a DBM file, but instead, to use a regular file with a maximum size. The +data in such a file is searched sequentially, and if the file fills up, the +oldest entry is deleted to make way for a new one. This means that some +correspondents may receive a second copy of the message after an unpredictable +interval. Consult your local information to see if your system is configured +this way. + + +More than one mail or vacation command may be obeyed in a single filter +run; they are all honoured, even when they are to the same recipient. + +
+
+Logging commands + +A log can be kept of actions taken by a filter file. This facility is normally +available in conventional configurations, but there are some situations where +it might not be. Also, the system administrator may choose to disable it. Check +your local information if in doubt. + + +Logging takes place while the filter file is being interpreted. It does not +queue up for later like the delivery commands. The reason for this is so that a +log file need be opened only once for several write operations. There are two +commands, neither of which constitutes a significant delivery. The first +defines a file to which logging output is subsequently written: + + + logfile <file name> +e.g. logfile $home/filter.log + + +The file name must be fully qualified. You can use $home, as in this +example, to refer to your home directory. The file name may optionally be +followed by a mode for the file, which is used if the file has to be created. +For example, + + +logfile $home/filter.log 0644 + + +The number is interpreted as octal, even if it does not begin with a zero. +The default for the mode is 600. It is suggested that the logfile command +normally appear as the first command in a filter file. Once a log file has +been obeyed, the logwrite command can be used to write to it: + + + logwrite "<some text string>" +e.g. logwrite "$tod_log $message_id processed" + + +It is possible to have more than one logfile command, to specify writing to +different log files in different circumstances. Writing takes place at the end +of the file, and a newline character is added to the end of each string if +there isn’t one already there. Newlines can be put in the middle of the string +by using the \n escape sequence. Lines from simultaneous deliveries may get +interleaved in the file, as there is no interlocking, so you should plan your +logging with this in mind. However, data should not get lost. + +
+
+The finish command + +The command finish, which has no arguments, causes Exim to stop +interpreting the filter file. This is not a significant action unless preceded +by seen. A filter file containing only seen finish is a black hole. + +
+
+The testprint command + +It is sometimes helpful to be able to print out the values of variables when +testing filter files. The command + + + testprint <text> +e.g. testprint "home=$home reply_address=$reply_address" + + +does nothing when mail is being delivered. However, when the filtering code is +being tested by means of the option (see section +above), the value of the string is written to the standard output. + +
+
+The fail command + +When Exim’s filtering facilities are being used as a system filter, the +fail command is available, to force delivery failure. Because this command +is normally usable only by the system administrator, and not enabled for use by +ordinary users, it is described in more detail in the main Exim specification +rather than in this document. + +
+
+The freeze command + +When Exim’s filtering facilities are being used as a system filter, the +freeze command is available, to freeze a message on the queue. Because this +command is normally usable only by the system administrator, and not enabled +for use by ordinary users, it is described in more detail in the main Exim +specification rather than in this document. + +
+
+The headers command + +The headers command can be used to change the target character set that is +used when translating the contents of encoded header lines for insertion by the +$header_ mechanism (see section above). The +default can be set in the Exim configuration; if not specified, ISO-8859-1 is +used. The only currently supported format for the headers command in user +filters is as in this example: + + +headers charset "UTF-8" + + +That is, headers is followed by the word charset and then the name of a +character set. This particular example would be useful if you wanted to compare +the contents of a header to a UTF-8 string. + + +In system filter files, the headers command can be used to add or remove +header lines from the message. These features are described in the main Exim +specification. + +
+
+Obeying commands conditionally + +Most of the power of filtering comes from the ability to test conditions and +obey different commands depending on the outcome. The if command is used to +specify conditional execution, and its general form is + + +if <condition> +then <commands> +elif <condition> +then <commands> +else <commands> +endif + + +There may be any number of elif and then sections (including none) and +the else section is also optional. Any number of commands, including nested +if commands, may appear in any of the <commands> sections. + + +Conditions can be combined by using the words and and or, and round +brackets (parentheses) can be used to specify how several conditions are to +combine. Without brackets, and is more binding than or. For example: + + +if +$h_subject: contains "Make money" or +$h_precedence: is "junk" or +($h_sender: matches ^\\d{8}@ and not personal) or +$message_body contains "this is not spam" +then +seen finish +endif + + +A condition can be preceded by not to negate it, and there are also some +negative forms of condition that are more English-like. + +
+
+String testing conditions + +There are a number of conditions that operate on text strings, using the words +begins, ends, is, contains and matches. If you want to +apply the same test to more than one header line, you can easily concatenate +them into a single string for testing, as in this example: + + +if "$h_to:, $h_cc:" contains me@domain.example then ... + + +If a string-testing condition name is written in lower case, the testing +of letters is done without regard to case; if it is written in upper case +(for example, CONTAINS), the case of letters is taken into account. + + + <text1> begins <text2> + <text1> does not begin <text2> +e.g. $header_from: begins "Friend@" + + +A begins test checks for the presence of the second string at the start of +the first, both strings having been expanded. + + + <text1> ends <text2> + <text1> does not end <text2> +e.g. $header_from: ends "public.com.example" + + +An ends test checks for the presence of the second string at the end of +the first, both strings having been expanded. + + + <text1> is <text2> + <text1> is not <text2> +e.g. $local_part_suffix is "-foo" + + +An is test does an exact match between the strings, having first expanded +both strings. + + + <text1> contains <text2> + <text1> does not contain <text2> +e.g. $header_subject: contains "evolution" + + +A contains test does a partial string match, having expanded both strings. + + + <text1> matches <text2> + <text1> does not match <text2> +e.g. $sender_address matches "(bill|john)@" + + +For a matches test, after expansion of both strings, the second one is +interpreted as a regular expression. Exim uses the PCRE regular expression +library, which provides regular expressions that are compatible with Perl. + + +The match succeeds if the regular expression matches any part of the first +string. If you want a regular expression to match only at the start or end of +the subject string, you must encode that requirement explicitly, using the +^ or $ metacharacters. The above example, which is not so constrained, +matches all these addresses: + + +bill@test.example +john@some.example +spoonbill@example.com +littlejohn@example.com + + +To match only the first two, you could use this: + + +if $sender_address matches "^(bill|john)@" then ... + + +Care must be taken if you need a backslash in a regular expression, because +backslashes are interpreted as escape characters both by the string expansion +code and by Exim’s normal processing of strings in quotes. For example, if you +want to test the sender address for a domain ending in .com the regular +expression is + + +\.com$ + + +The backslash and dollar sign in that expression have to be escaped when used +in a filter command, as otherwise they would be interpreted by the expansion +code. Thus, what you actually write is + + +if $sender_address matches \\.com\$ + + +An alternative way of handling this is to make use of the \N expansion +flag for suppressing expansion: + + +if $sender_address matches \N\.com$\N + + +Everything between the two occurrences of \N is copied without change by +the string expander (and in fact you do not need the final one, because it is +at the end of the string). If the regular expression is given in quotes +(mandatory only if it contains white space) you have to write either + + +if $sender_address matches "\\\\.com\\$" + + +or + + +if $sender_address matches "\\N\\.com$\\N" + + +If the regular expression contains bracketed sub-expressions, numeric +variable substitutions such as $1 can be used in the subsequent actions +after a successful match. If the match fails, the values of the numeric +variables remain unchanged. Previous values are not restored after endif. +In other words, only one set of values is ever available. If the condition +contains several sub-conditions connected by and or or, it is the +strings extracted from the last successful match that are available in +subsequent actions. Numeric variables from any one sub-condition are also +available for use in subsequent sub-conditions, because string expansion of a +condition occurs just before it is tested. + +
+
+Numeric testing conditions + +The following conditions are available for performing numerical tests: + + + <number1> is above <number2> + <number1> is not above <number2> + <number1> is below <number2> + <number1> is not below <number2> +e.g. $message_size is not above 10k + + +The <number> arguments must expand to strings of digits, optionally +followed by one of the letters K or M (upper case or lower case) which cause +multiplication by 1024 and 1024x1024 respectively. + +
+
+Testing for significant deliveries + +You can use the delivered condition to test whether or not any previously +obeyed filter commands have set up a significant delivery. For example: + + +if not delivered then save mail/anomalous endif + + +Delivered is perhaps a poor choice of name for this condition, because the +message has not actually been delivered; rather, a delivery has been set up for +later processing. + +
+
+Testing for error messages + +The condition error_message is true if the incoming message is a bounce +(mail delivery error) message. Putting the command + + +if error_message then finish endif + + +at the head of your filter file is a useful insurance against things going +wrong in such a way that you cannot receive delivery error reports. Note: +error_message is a condition, not an expansion variable, and therefore is +not preceded by $. + +
+
+Testing a list of addresses + +There is a facility for looping through a list of addresses and applying a +condition to each of them. It takes the form + + +foranyaddress <string> (<condition>) + + +where <string> is interpreted as a list of RFC 2822 addresses, as in a +typical header line, and <condition> is any valid filter condition or +combination of conditions. The group syntax that is defined for certain +header lines that contain addresses is supported. + + +The parentheses surrounding the condition are mandatory, to delimit it from +possible further sub-conditions of the enclosing if command. Within the +condition, the expansion variable $thisaddress is set to the non-comment +portion of each of the addresses in the string in turn. For example, if the +string is + + +B.Simpson <bart@sfld.example>, lisa@sfld.example (his sister) + + +then $thisaddress would take on the values bart@sfld.example and +lisa@sfld.example in turn. + + +If there are no valid addresses in the list, the whole condition is false. If +the internal condition is true for any one address, the overall condition is +true and the loop ends. If the internal condition is false for all addresses in +the list, the overall condition is false. This example tests for the presence +of an eight-digit local part in any address in a To: header: + + +if foranyaddress $h_to: ( $thisaddress matches ^\\d{8}@ ) then ... + + +When the overall condition is true, the value of $thisaddress in the +commands that follow then is the last value it took on inside the loop. At +the end of the if command, the value of $thisaddress is reset to what it +was before. It is best to avoid the use of multiple occurrences of +foranyaddress, nested or otherwise, in a single if command, if the +value of $thisaddress is to be used afterwards, because it isn’t always +clear what the value will be. Nested if commands should be used instead. + + +Header lines can be joined together if a check is to be applied to more than +one of them. For example: + + +if foranyaddress $h_to:,$h_cc: .... + + +This scans through the addresses in both the To: and the Cc: headers. + +
+
+Testing for personal mail + +A common requirement is to distinguish between incoming personal mail and mail +from a mailing list, or from a robot or other automatic process (for example, a +bounce message). In particular, this test is normally required for vacation +messages. + + +The personal condition checks that the message is not a bounce message and +that the current user’s email address appears in the To: header. It also +checks that the sender is not the current user or one of a number of common +daemons, and that there are no header lines starting List- in the message. +Finally, it checks the content of the Precedence: header line, if there is +one. + + +You should always use the personal condition when generating automatic +responses. This example shows the use of personal in a filter file that is +sending out vacation messages: + + +if personal then +mail to $reply_address +subject "I am on holiday" +file $home/vacation/message +once $home/vacation/once +once_repeat 10d +endif + + +It is tempting, when writing commands like the above, to quote the original +subject in the reply. For example: + + +subject "Re: $h_subject:" + + +There is a danger in doing this, however. It may allow a third party to +subscribe you to an opt-in mailing list, provided that the list accepts bounce +messages as subscription confirmations. (Messages sent from filters are always +sent as bounce messages.) Well-managed lists require a non-bounce message to +confirm a subscription, so the danger is relatively small. + + +If prefixes or suffixes are in use for local parts – something which depends +on the configuration of Exim (see section below) – the tests +for the current user are done with the full address (including the prefix and +suffix, if any) as well as with the prefix and suffix removed. If the system is +configured to rewrite local parts of mail addresses, for example, to rewrite +dag46 as Dirk.Gently, the rewritten form of the address is also used in +the tests. + +
+
+Alias addresses for the personal condition + +It is quite common for people who have mail accounts on a number of different +systems to forward all their mail to one system, and in this case a check for +personal mail should test all their various mail addresses. To allow for this, +the personal condition keyword can be followed by + + +alias <address> + + +any number of times, for example: + + +if personal alias smith@else.where.example + alias jones@other.place.example +then ... + + +The alias addresses are treated as alternatives to the current user’s email +address when testing the contents of header lines. + +
+
+Details of the personal condition + +The basic personal test is roughly equivalent to the following: + + +not error_message and +$message_headers does not contain "\nList-Id:" and +$message_headers does not contain "\nList-Help:" and +$message_headers does not contain "\nList-Subscribe:" and +$message_headers does not contain "\nList-Unsubscribe:" and +$message_headers does not contain "\nList-Post:" and +$message_headers does not contain "\nList-Owner:" and +$message_headers does not contain "\nList-Archive:" and +( +"${if def:h_auto-submitted:{present}{absent}}" is "absent" or +$header_auto-submitted: is "no" +) and +$header_precedence: does not contain "bulk" and +$header_precedence: does not contain "list" and +$header_precedence: does not contain "junk" and +foranyaddress $header_to: +( $thisaddress contains "$local_part$domain" ) and +not foranyaddress $header_from: +( +$thisaddress contains "$local_part@$domain" or +$thisaddress contains "server@" or +$thisaddress contains "daemon@" or +$thisaddress contains "root@" or +$thisaddress contains "listserv@" or +$thisaddress contains "majordomo@" or +$thisaddress contains "-request@" or +$thisaddress matches "^owner-[^@]+@" +) + + +The variable $local_part contains the local part of the mail address of +the user whose filter file is being run – it is normally your login id. The +$domain variable contains the mail domain. As explained above, if aliases +or rewriting are defined, or if prefixes or suffixes are in use, the tests for +the current user are also done with alternative addresses. + +
+
+Testing delivery status + +There are two conditions that are intended mainly for use in system filter +files, but which are available in users’ filter files as well. The condition +first_delivery is true if this is the first process that is attempting to +deliver the message, and false otherwise. This indicator is not reset until the +first delivery process successfully terminates; if there is a crash or a power +failure (for example), the next delivery attempt is also a first delivery. + + +In a user filter file first_delivery will be false if there was previously +an error in the filter, or if a delivery for the user failed owing to, for +example, a quota error, or if forwarding to a remote address was deferred for +some reason. + + +The condition manually_thawed is true if the message was frozen for +some reason, and was subsequently released by the system administrator. It is +unlikely to be of use in users’ filter files. + +
+
+Multiple personal mailboxes +SEC31 + +The system administrator can configure Exim so that users can set up variants +on their email addresses and handle them separately. Consult your system +administrator or local documentation to see if this facility is enabled on your +system, and if so, what the details are. + + +The facility involves the use of a prefix or a suffix on an email address. For +example, all mail addressed to lg303-<something> would be the property +of user lg303, who could determine how it was to be handled, depending on +the value of <something>. + + +There are two possible ways in which this can be set up. The first possibility +is the use of multiple .forward files. In this case, mail to lg303-foo, +for example, is handled by looking for a file called .forward-foo in +lg303’s home directory. If such a file does not exist, delivery fails +and the message is returned to its sender. + + +The alternative approach is to pass all messages through a single .forward +file, which must be a filter file so that it can distinguish between the +different cases by referencing the variables $local_part_prefix or +$local_part_suffix, as in the final example in section below. + + +It is possible to configure Exim to support both schemes at once. In this case, +a specific .forward-foo file is first sought; if it is not found, the basic +.forward file is used. + + +The personal test (see section ) includes prefixes and +suffixes in its checking. + +
+
+Ignoring delivery errors + +As was explained above, filtering just sets up addresses for delivery – no +deliveries are actually done while a filter file is active. If any of the +generated addresses subsequently suffers a delivery failure, an error message +is generated in the normal way. However, if a filter command that sets up a +delivery is preceded by the word noerror, errors for that delivery, +and any deliveries consequent on it (that is, from alias, forwarding, or +filter files it invokes) are ignored. + +
+
+Examples of Exim filter commands + +Simple forwarding: + + +# Exim filter +deliver baggins@rivendell.middle-earth.example + + +Vacation handling using traditional means, assuming that the .vacation.msg +and other files have been set up in your home directory: + + +# Exim filter +unseen pipe "/usr/ucb/vacation \"$local_part\"" + + +Vacation handling inside Exim, having first created a file called +.vacation.msg in your home directory: + + +# Exim filter +if personal then vacation endif + + +File some messages by subject: + + +# Exim filter +if $header_subject: contains "empire" or +$header_subject: contains "foundation" +then +save $home/mail/f+e +endif + + +Save all non-urgent messages by weekday: + + +# Exim filter +if $header_subject: does not contain "urgent" and +$tod_full matches "^(...)," +then +save $home/mail/$1 +endif + + +Throw away all mail from one site, except from postmaster: + + +# Exim filter +if $reply_address contains "@spam.site.example" and +$reply_address does not contain "postmaster@" +then +seen finish +endif + + +Handle multiple personal mailboxes: + + +# Exim filter +if $local_part_suffix is "-foo" +then +save $home/mail/foo +elif $local_part_suffix is "-bar" +then +save $home/mail/bar +endif + +
+ + +