X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/05070e30ddf4711848752213928f862ada1a509e..e51c7be22dfccad376659a1a46cee93c9979bbf7:/doc/doc-txt/experimental-spec.txt

diff --git a/doc/doc-txt/experimental-spec.txt b/doc/doc-txt/experimental-spec.txt
index 271ab0ba0..588543454 100644
--- a/doc/doc-txt/experimental-spec.txt
+++ b/doc/doc-txt/experimental-spec.txt
@@ -6,34 +6,6 @@ about experimental  features, all  of which  are unstable and
 liable to incompatible change.
 
 
-PRDR support
---------------------------------------------------------------
-
-Per-Recipient Data Reponse is an SMTP extension proposed by Eric Hall
-in a (now-expired) IETF draft from 2007.  It's not hit mainstream
-use, but has apparently been implemented in the META1 MTA.
-
-There is mention at http://mail.aegee.org/intern/sendmail.html
-of a patch to sendmail "to make it PRDR capable".
-
- ref: http://www.eric-a-hall.com/specs/draft-hall-prdr-00.txt
-
-If Exim is built with EXPERIMENTAL_PRDR there is a new config
-boolean "prdr_enable" which controls whether PRDR is advertised
-as part of an EHLO response, a new "acl_data_smtp_prdr" ACL
-(called for each recipient, after data arrives but before the
-data ACL), and a new smtp transport option "hosts_try_prdr".
-
-PRDR may be used to support per-user content filtering.  Without it
-one must defer any recipient after the first that has a different
-content-filter configuration.  With PRDR, the RCPT-time check
-for this can be disabled when the MAIL-time $smtp_command included
-"PRDR".  Any required difference in behaviour of the main DATA-time
-ACL should however depend on the PRDR-time ACL having run, as Exim
-will avoid doing so in some situations (eg.  single-recipient mails).
-
-
-
 OCSP Stapling support
 --------------------------------------------------------------
 
@@ -69,7 +41,8 @@ starts retrying to fetch an OCSP proof some time before its current
 proof expires.  The downside is that it requires server support.
 
 If Exim is built with EXPERIMENTAL_OCSP and it was built with OpenSSL,
-then it gains a new global option: "tls_ocsp_file".
+or with GnuTLS 3.1.3 or later, then it gains a new global option:
+"tls_ocsp_file".
 
 The file specified therein is expected to be in DER format, and contain
 an OCSP proof.  Exim will serve it as part of the TLS handshake.  This
@@ -83,14 +56,21 @@ contents are always valid.  Exim will expand the "tls_ocsp_file" option
 on each connection, so a new file will be handled transparently on the
 next connection.
 
-Exim will check for a valid next update timestamp in the OCSP proof;
-if not present, or if the proof has expired, it will be ignored.
+Under OpenSSL Exim will check for a valid next update timestamp in the
+OCSP proof; if not present, or if the proof has expired, it will be
+ignored.
+
+Also, given EXPERIMENTAL_OCSP, the smtp transport gains two options:
+- "hosts_require_ocsp"; a host-list for which an OCSP Stapling
+is requested and required for the connection to proceed.  The default
+value is empty.
+- "hosts_request_ocsp"; a host-list for which (additionally) an OCSP
+Stapling is requested (but not necessarily verified).  The default
+value is "*" meaning that requests are made unless configured
+otherwise.
 
-Also, given EXPERIMENTAL_OCSP and OpenSSL, the smtp transport gains
-a "hosts_require_ocsp" option; a host-list for which an OCSP Stapling
-is requested and required for the connection to proceed.  The host(s)
-should also be in "hosts_require_tls", and "tls_verify_certificates"
-configured for the transport.
+The host(s) should also be in "hosts_require_tls", and
+"tls_verify_certificates" configured for the transport.
 
 For the client to be able to verify the stapled OCSP the server must
 also supply, in its stapled information, any intermediate
@@ -99,6 +79,9 @@ of the server certificate.  There may be zero or one such. These
 intermediate certificates should be added to the server OCSP stapling
 file (named by tls_ocsp_file).
 
+Note that the proof only covers the terminal server certificate,
+not any of the chain from CA to it.
+
 At this point in time, we're gathering feedback on use, to determine if
 it's worth adding complexity to the Exim daemon to periodically re-fetch
 OCSP files and somehow handling multiple files.
@@ -107,8 +90,8 @@ OCSP files and somehow handling multiple files.
   OCSP server is supplied.  The server URL may be included in the
   server certificate, if the CA is helpful.
 
-  One fail mode seen was the OCSP Signer cert expiring before the end
-  of vailidity of the OCSP proof. The checking done by Exim/OpenSSL
+  One failure mode seen was the OCSP Signer cert expiring before the end
+  of validity of the OCSP proof. The checking done by Exim/OpenSSL
   noted this as invalid overall, but the re-fetch script did not.
 
 
@@ -452,15 +435,21 @@ which the spf condition should succeed. Valid strings are:
               This means the queried domain has published
               a SPF record, but wants to allow outside
               servers to send mail under its domain as well.
-  o err_perm  This indicates a syntax error in the SPF
-              record of the queried domain. This should be
-              treated like "none".
-  o err_temp  This indicates a temporary error during all
+              This should be treated like "none".
+  o permerror This indicates a syntax error in the SPF
+              record of the queried domain. You may deny
+              messages when this occurs. (Changed in 4.83)
+  o temperror This indicates a temporary error during all
               processing, including Exim's SPF processing.
               You may defer messages when this occurs.
+              (Changed in 4.83)
+  o err_temp  Same as permerror, deprecated in 4.83, will be
+              removed in a future release.
+  o err_perm  Same as temperror, deprecated in 4.83, will be
+              removed in a future release.
 
 You can prefix each string with an exclamation mark to  invert
-is meaning,  for example  "!fail" will  match all  results but
+its meaning,  for example  "!fail" will  match all  results but
 "fail".  The  string  list is  evaluated  left-to-right,  in a
 short-circuit fashion.  When a  string matches  the outcome of
 the SPF check, the condition  succeeds. If none of the  listed
@@ -510,8 +499,8 @@ variables.
 
   $spf_result
   This contains the outcome of the SPF check in string form,
-  one of pass, fail, softfail, none, neutral, err_perm or
-  err_temp.
+  one of pass, fail, softfail, none, neutral, permerror or
+  temperror.
 
   $spf_smtp_comment
   This contains a string that can be used in a SMTP response
@@ -773,7 +762,7 @@ fails.
 
 Of course, you can also use any other lookup method that Exim
 supports, including LDAP, Postgres, MySQL, etc, as long as the
-result is a list of colon-separated strings;
+result is a list of colon-separated strings.
 
 Several expansion variables are set before the DATA ACL is
 processed, and you can use them in this ACL.  The following
@@ -781,7 +770,10 @@ expansion variables are available:
 
   o $dmarc_status
     This is a one word status indicating what the DMARC library
-    thinks of the email.
+    thinks of the email.  It is a combination of the results of
+    DMARC record lookup and the SPF/DKIM/DMARC processing results
+    (if a DMARC record was found).  The actual policy declared
+    in the DMARC record is in a separate expansion variable.
 
   o $dmarc_status_text
     This is a slightly longer, human readable status.
@@ -790,6 +782,11 @@ expansion variables are available:
     This is the domain which DMARC used to look up the DMARC
     policy record.
 
+  o $dmarc_domain_policy
+    This is the policy declared in the DMARC record.  Valid values
+    are "none", "reject" and "quarantine".  It is blank when there
+    is any error, including no DMARC record.
+
   o $dmarc_ar_header
     This is the entire Authentication-Results header which you can
     add using an add_header modifier.
@@ -825,6 +822,9 @@ b. Configure, somewhere before the DATA ACL, the control option to
   warn    !domains       = +screwed_up_dmarc_records
           control        = dmarc_enable_forensic
 
+  warn    condition      = (lookup if destined to mailing list)
+          set acl_m_mailing_list = 1
+
 (DATA ACL)
   warn    dmarc_status   = accept : none : off
           !authenticated = *
@@ -840,6 +840,10 @@ b. Configure, somewhere before the DATA ACL, the control option to
           set $acl_m_quarantine = 1
           # Do something in a transport with this flag variable
 
+  deny    condition      = ${if eq{$dmarc_domain_policy}{reject}}
+          condition      = ${if eq{$acl_m_mailing_list}{1}}
+          message        = Messages from $dmarc_used_domain break mailing lists
+
   deny    dmarc_status   = reject
           !authenticated = *
           message        = Message from $domain_used_domain failed sender's DMARC policy, REJECT
@@ -912,7 +916,7 @@ log failures of remote hosts. It is executed only when exim has
 attempted to deliver a message to a remote host and failed due to
 an error which doesn't seem to be related to the individual
 message, sender, or recipient address.
-See section 45.2 of the exim documentation for more details on how
+See section 47.2 of the exim documentation for more details on how
 this is determined.
 
 Example:
@@ -931,6 +935,237 @@ ${lookup mysql {insert into delivlog set \
     deliverrstr = '${quote_mysql:$tpda_defer_errstr}' \
     }}
 
+
+Redis Lookup
+--------------------------------------------------------------
+
+Redis is open source advanced key-value data store. This document
+does not explain the fundamentals, you should read and understand how
+it works by visiting the website at http://www.redis.io/.
+
+Redis lookup support is added via the hiredis library.  Visit:
+
+  https://github.com/redis/hiredis
+
+to obtain a copy, or find it in your operating systems package repository.
+If building from source, this description assumes that headers will be in
+/usr/local/include, and that the libraries are in /usr/local/lib.
+
+1. In order to build exim with Redis lookup support add
+
+EXPERIMENTAL_REDIS=yes
+
+to your Local/Makefile. (Re-)build/install exim. exim -d should show
+Experimental_Redis in the line "Support for:".
+
+EXPERIMENTAL_REDIS=yes
+LDFLAGS += -lhiredis
+# CFLAGS += -I/usr/local/include
+# LDFLAGS += -L/usr/local/lib
+
+The first line sets the feature to include the correct code, and
+the second line says to link the hiredis libraries into the
+exim binary.  The commented out lines should be uncommented if you
+built hiredis from source and installed in the default location.
+Adjust the paths if you installed them elsewhere, but you do not
+need to uncomment them if an rpm (or you) installed them in the
+package controlled locations (/usr/include and /usr/lib).
+
+
+2. Use the following global settings to configure Redis lookup support:
+
+Required:
+redis_servers       This option provides a list of Redis servers
+                    and associated connection data, to be used in
+                    conjunction with redis lookups. The option is
+                    only available if Exim is configured with Redis
+                    support.
+
+For example:
+
+redis_servers = 127.0.0.1/10/ - using database 10 with no password
+redis_servers = 127.0.0.1//password - to make use of the default database of 0 with a password
+redis_servers = 127.0.0.1// - for default database of 0 with no password
+
+3. Once you have the Redis servers defined you can then make use of the
+experimental Redis lookup by specifying ${lookup redis{}} in a lookup query.
+
+4. Example usage:
+
+(Host List)
+hostlist relay_from_ips = <\n ${lookup redis{SMEMBERS relay_from_ips}}
+
+Where relay_from_ips is a Redis set which contains entries such as "192.168.0.0/24" "10.0.0.0/8" and so on.
+The result set is returned as
+192.168.0.0/24
+10.0.0.0/8
+..
+.
+
+(Domain list)
+domainlist virtual_domains = ${lookup redis {HGET $domain domain}}
+
+Where $domain is a hash which includes the key 'domain' and the value '$domain'.
+
+(Adding or updating an existing key)
+set acl_c_spammer = ${if eq{${lookup redis{SPAMMER_SET}}}{OK}}
+
+Where SPAMMER_SET is a macro and it is defined as
+
+"SET SPAMMER <some_value>"
+
+(Getting a value from Redis)
+
+set acl_c_spam_host = ${lookup redis{GET...}}
+
+
+Proxy Protocol Support
+--------------------------------------------------------------
+
+Exim now has Experimental "Proxy Protocol" support.  It was built on
+specifications from:
+http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt
+Above URL revised May 2014 to change version 2 spec:
+http://git.1wt.eu/web?p=haproxy.git;a=commitdiff;h=afb768340c9d7e50d8e
+
+The purpose of this function is so that an application load balancer,
+such as HAProxy, can sit in front of several Exim servers and Exim
+will log the IP that is connecting to the proxy server instead of
+the IP of the proxy server when it connects to Exim.  It resets the
+$sender_address_host and $sender_address_port to the IP:port of the
+connection to the proxy.  It also re-queries the DNS information for
+this new IP address so that the original sender's hostname and IP
+get logged in the Exim logfile.  There is no logging if a host passes or
+fails Proxy Protocol negotiation, but it can easily be determined and
+recorded in an ACL (example is below).
+
+1. To compile Exim with Proxy Protocol support, put this in
+Local/Makefile:
+
+EXPERIMENTAL_PROXY=yes
+
+2. Global configuration settings:
+
+proxy_required_hosts = HOSTLIST
+
+The proxy_required_hosts option will require any IP in that hostlist
+to use Proxy Protocol. The specification of Proxy Protocol is very
+strict, and if proxy negotiation fails, Exim will not allow any SMTP
+command other than QUIT. (See end of this section for an example.)
+The option is expanded when used, so it can be a hostlist as well as
+string of IP addresses.  Since it is expanded, specifying an alternate
+separator is supported for ease of use with IPv6 addresses.
+
+To log the IP of the proxy in the incoming logline, add:
+  log_selector = +proxy
+
+A default incoming logline (wrapped for appearance) will look like this:
+
+  2013-11-04 09:25:06 1VdNti-0001OY-1V <= me@example.net
+  H=mail.example.net [1.2.3.4] P=esmtp S=433
+
+With the log selector enabled, an email that was proxied through a
+Proxy Protocol server at 192.168.1.2 will look like this:
+
+  2013-11-04 09:25:06 1VdNti-0001OY-1V <= me@example.net
+  H=mail.example.net [1.2.3.4] P=esmtp PRX=192.168.1.2 S=433
+
+3. In the ACL's the following expansion variables are available.
+
+proxy_host_address   The (internal) src IP of the proxy server
+                     making the connection to the Exim server.
+proxy_host_port      The (internal) src port the proxy server is
+                     using to connect to the Exim server.
+proxy_target_address The dest (public) IP of the remote host to
+                     the proxy server.
+proxy_target_port    The dest port the remote host is using to
+                     connect to the proxy server.
+proxy_session        Boolean, yes/no, the connected host is required
+                     to use Proxy Protocol.
+
+There is no expansion for a failed proxy session, however you can detect
+it by checking if $proxy_session is true but $proxy_host is empty.  As
+an example, in my connect ACL, I have:
+
+  warn    condition      = ${if and{ {bool{$proxy_session}} \
+                                     {eq{$proxy_host_address}{}} } }
+          log_message    = Failed required proxy protocol negotiation \
+                           from $sender_host_name [$sender_host_address]
+
+  warn    condition      = ${if and{ {bool{$proxy_session}} \
+                                     {!eq{$proxy_host_address}{}} } }
+          # But don't log health probes from the proxy itself
+          condition      = ${if eq{$proxy_host_address}{$sender_host_address} \
+                                {false}{true}}
+          log_message    = Successfully proxied from $sender_host_name \
+                           [$sender_host_address] through proxy protocol \
+                           host $proxy_host_address
+
+  # Possibly more clear
+  warn logwrite = Remote Source Address: $sender_host_address:$sender_host_port
+       logwrite = Proxy Target Address: $proxy_target_address:$proxy_target_port
+       logwrite = Proxy Internal Address: $proxy_host_address:$proxy_host_port
+       logwrite = Internal Server Address: $received_ip_address:$received_port
+
+
+4. Runtime issues to be aware of:
+   - Since the real connections are all coming from your proxy, and the
+     per host connection tracking is done before Proxy Protocol is
+     evaluated, smtp_accept_max_per_host must be set high enough to
+     handle all of the parallel volume you expect per inbound proxy.
+   - The proxy has 3 seconds (hard-coded in the source code) to send the
+     required Proxy Protocol header after it connects.  If it does not,
+     the response to any commands will be:
+     "503 Command refused, required Proxy negotiation failed"
+   - If the incoming connection is configured in Exim to be a Proxy
+     Protocol host, but the proxy is not sending the header, the banner
+     does not get sent until the timeout occurs.  If the sending host
+     sent any input (before the banner), this causes a standard Exim
+     synchronization error (i.e. trying to pipeline before PIPELINING
+     was advertised).
+   - This is not advised, but is mentioned for completeness if you have
+     a specific internal configuration that you want this:  If the Exim
+     server only has an internal IP address and no other machines in your
+     organization will connect to it to try to send email, you may
+     simply set the hostlist to "*", however, this will prevent local
+     mail programs from working because that would require mail from
+     localhost to use Proxy Protocol.  Again, not advised!
+
+5. Example of a refused connection because the Proxy Protocol header was
+not sent from a host configured to use Proxy Protocol.  In the example,
+the 3 second timeout occurred (when a Proxy Protocol banner should have
+been sent), the banner was displayed to the user, but all commands are
+rejected except for QUIT:
+
+# nc mail.example.net 25
+220-mail.example.net, ESMTP Exim 4.82+proxy, Mon, 04 Nov 2013 10:45:59
+220 -0800 RFC's enforced
+EHLO localhost
+503 Command refused, required Proxy negotiation failed
+QUIT
+221 mail.example.net closing connection
+
+
+
+Certificate name checking
+--------------------------------------------------------------
+The X509 certificates used for TLS are supposed be verified
+that they are owned by the expected host.  The coding of TLS
+support to date has not made these checks.
+
+If built with EXPERIMENTAL_CERTNAMES defined, code is
+included to do so, and a new smtp transport option
+"tls_verify_cert_hostname" supported which takes a list of
+names for which the checks must be made.  The host must
+also be in "tls_verify_hosts".
+
+Both Subject and Subject-Alternate-Name certificate fields
+are supported, as are wildcard certificates (limited to
+a single wildcard being the initial component of a 3-or-more
+component FQDN).
+
+
+
 --------------------------------------------------------------
 End of file
 --------------------------------------------------------------