dotted-nibble hexadecimal form. In both cases, this is the "natural" form
for DNS. For example,
.code
-${reverse_ip:192.0.2.4} and ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
+${reverse_ip:192.0.2.4}
+${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
.endd
returns
.code
-4.2.0.192 and 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
+4.2.0.192
+3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
.endd
a different certificate to be presented (and optionally a different key to be
used) to the client, based upon the value of the SNI extension.
-The value will be retained for the lifetime of the message, and not changed
-during outbound SMTP.
+The value will be retained for the lifetime of the message. During outbound
+SMTP deliveries, it reflects the value of the &%tls_sni%& option on
+the transport.
This is currently only available when using OpenSSL, built with support for
SNI.
An example:
.code
-openssl_options = -all +microsoft_big_sslv3_buffer +dont_insert_empty_fragments
+# Make both old MS and old Eudora happy:
+openssl_options = -all +microsoft_big_sslv3_buffer \
+ +dont_insert_empty_fragments
.endd
Possible options may include:
.ilist
&`all`&
-.ilist
+.next
&`allow_unsafe_legacy_renegotiation`&
-.ilist
+.next
&`cipher_server_preference`&
-.ilist
+.next
&`dont_insert_empty_fragments`&
-.ilist
+.next
&`ephemeral_rsa`&
-.ilist
+.next
&`legacy_server_connect`&
-.ilist
+.next
&`microsoft_big_sslv3_buffer`&
-.ilist
+.next
&`microsoft_sess_id_bug`&
-.ilist
+.next
&`msie_sslv2_rsa_padding`&
-.ilist
+.next
&`netscape_challenge_bug`&
-.ilist
+.next
&`netscape_reuse_cipher_change_bug`&
-.ilist
+.next
&`no_compression`&
-.ilist
+.next
&`no_session_resumption_on_renegotiation`&
-.ilist
+.next
&`no_sslv2`&
-.ilist
+.next
&`no_sslv3`&
-.ilist
+.next
&`no_ticket`&
-.ilist
+.next
&`no_tlsv1`&
-.ilist
+.next
&`no_tlsv1_1`&
-.ilist
+.next
&`no_tlsv1_2`&
-.ilist
+.next
&`single_dh_use`&
-.ilist
+.next
&`single_ecdh_use`&
-.ilist
+.next
&`ssleay_080_client_dh_bug`&
-.ilist
+.next
&`sslref2_reuse_cert_type_bug`&
-.ilist
+.next
&`tls_block_padding_bug`&
-.ilist
+.next
&`tls_d5_bug`&
-.ilist
+.next
&`tls_rollback_bug`&
.endlist
use when sending messages as a client, you must set the &%tls_certificate%&
option in the relevant &(smtp)& transport.
+.new
+If the option contains &$tls_sni$& and Exim is built against OpenSSL, then
+if the OpenSSL build supports TLS extensions and the TLS client sends the
+Server Name Indication extension, then this option and &%tls_privatekey%&
+will be re-expanded.
+.wen
.option tls_crl main string&!! unset
.cindex "TLS" "server certificate revocation list"
key is assumed to be in the same file as the server's certificates. See chapter
&<<CHAPTLS>>& for further details.
+.new
+See &%tls_certificate%& discussion of &$tls_sni$& for when this option may be
+re-expanded.
+.wen
+
.option tls_remember_esmtp main boolean false
.cindex "TLS" "esmtp state; remembering"
+.new
+.option tls_sni smtp string&!! unset
+.cindex "TLS" "Server Name Indication"
+.vindex "&$tls_sni$&"
+If this option is set then it sets the $tls_sni variable and causes any
+TLS session to pass this value as the Server Name Indication extension to
+the remote side, which can be used by the remote side to select an appropriate
+certificate and private key for the session.
+
+OpenSSL only, also requiring a build of OpenSSL that supports TLS extensions.
+.wen
+
+
+
.option tls_tempfail_tryclear smtp boolean true
.cindex "4&'xx'& responses" "to STARTTLS"
When the server host is not in &%hosts_require_tls%&, and there is a problem in
server_prompts = Username:: : Password::
server_condition = ${if and{{ \
!eq{}{$auth1} }{ \
- ldapauth{user="cn=${quote_ldap_dn:$auth1},ou=people,o=example.org" \
- pass=${quote:$auth2} \
- ldap://ldap.example.org/} }} }
+ ldapauth{\
+ user="uid=${quote_ldap_dn:$auth1},ou=people,o=example.org" \
+ pass=${quote:$auth2} \
+ ldap://ldap.example.org/} }} }
server_set_id = uid=$auth1,ou=people,o=example.org
.endd
We have to check that the username is not empty before using it, because LDAP
new rate.
.code
acl_check_connect:
- deny ratelimit = 100 / 5m / readonly
- log_message = RATE CHECK: $sender_rate/$sender_rate_period \
- (max $sender_rate_limit)
+ deny ratelimit = 100 / 5m / readonly
+ log_message = RATE CHECK: $sender_rate/$sender_rate_period \
+ (max $sender_rate_limit)
# ...
acl_check_mail:
- warn ratelimit = 100 / 5m / strict
- log_message = RATE UPDATE: $sender_rate/$sender_rate_period \
- (max $sender_rate_limit)
+ warn ratelimit = 100 / 5m / strict
+ log_message = RATE UPDATE: $sender_rate/$sender_rate_period \
+ (max $sender_rate_limit)
.endd
If Exim encounters multiple &%ratelimit%& conditions with the same key when
&` tls_certificate_verified `& certificate verification status
&`*tls_cipher `& TLS cipher suite on <= and => lines
&` tls_peerdn `& TLS peer DN on <= and => lines
+&` tls_sni `& TLS SNI on <= lines
&` unknown_in_list `& DNS lookup failed in list match
&` all `& all of the above
connection, and a certificate is supplied by the remote host, the peer DN is
added to the log line, preceded by DN=.
.next
+.cindex "log" "TLS SNI"
+.cindex "TLS" "logging SNI"
+&%tls_sni%&: When a message is received over an encrypted connection, and
+the remote host provided the Server Name Indication extension, the SNI is
+added to the log line, preceded by SNI=.
+.next
.cindex "log" "DNS failure in list"
&%unknown_in_list%&: This setting causes a log entry to be written when the
result of a list match is failure because a DNS lookup failed.
. ////////////////////////////////////////////////////////////////////////////
. ////////////////////////////////////////////////////////////////////////////
-.chapter "Support for DKIM (DomainKeys Identified Mail) - RFC4871" "CHID12" &&&
+.chapter "Support for DKIM (DomainKeys Identified Mail)" "CHID12" &&&
"DKIM Support"
.cindex "DKIM"
+DKIM is a mechanism by which messages sent by some entity can be provably
+linked to a domain which that entity controls. It permits reputation to
+be tracked on a per-domain basis, rather than merely upon source IP address.
+DKIM is documented in RFC 4871.
+
Since version 4.70, DKIM support is compiled into Exim by default. It can be
disabled by setting DISABLE_DKIM=yes in Local/Makefile.
Please note that verification of DKIM signatures in incoming mail is turned
on by default for logging purposes. For each signature in incoming email,
exim will log a line displaying the most important signature details, and the
-signature status. Here is an example:
+signature status. Here is an example (with line-breaks added for clarity):
.code
-2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM: d=facebookmail.com s=q1-2009b c=relaxed/relaxed a=rsa-sha1 i=@facebookmail.com t=1252484542 [verification succeeded]
+2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM:
+ d=facebookmail.com s=q1-2009b
+ c=relaxed/relaxed a=rsa-sha1
+ i=@facebookmail.com t=1252484542 [verification succeeded]
.endd
You might want to turn off DKIM verification processing entirely for internal
or relay mail sources. To do that, set the &%dkim_disable_verify%& ACL
verb to a group of domains or identities. For example:
.code
-# Warn when message apparently from GMail has no signature at all
+# Warn when Mail purportedly from GMail has no signature at all
warn log_message = GMail sender without DKIM signature
sender_domains = gmail.com
dkim_signers = gmail.com
.vitem &%dkim_status%&
ACL condition that checks a colon-separated list of possible DKIM verification
results agains the actual result of verification. This is typically used
-to restrict an ACL verb to a list of verification outcomes, like:
+to restrict an ACL verb to a list of verification outcomes, for example:
.code
-deny message = Message from Paypal with invalid or missing signature
+deny message = Mail from Paypal with invalid/missing signature
sender_domains = paypal.com:paypal.de
dkim_signers = paypal.com:paypal.de
dkim_status = none:invalid:fail
git://git.exim.org / exim.git / blobdiff