-/* $Cambridge: exim/src/src/acl.c,v 1.66 2006/09/25 10:14:20 ph10 Exp $ */
+/* $Cambridge: exim/src/src/acl.c,v 1.76 2007/06/19 13:32:06 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2006 */
+/* Copyright (c) University of Cambridge 1995 - 2007 */
/* See the file NOTICE for conditions of use and distribution. */
/* Code for handling Access Control Lists (ACLs) */
{ US"accept", US"defer", US"deny", US"discard", US"drop", US"require",
US"warn" };
-/* For each verb, the condition for which "message" is used */
-
-static int msgcond[] = { FAIL, OK, OK, FAIL, OK, FAIL, OK };
+/* For each verb, the conditions for which "message" or "log_message" are used
+are held as a bitmap. This is to avoid expanding the strings unnecessarily. For
+"accept", the FAIL case is used only after "endpass", but that is selected in
+the code. */
+
+static int msgcond[] = {
+ (1<<OK) | (1<<FAIL) | (1<<FAIL_DROP), /* accept */
+ (1<<OK), /* defer */
+ (1<<OK), /* deny */
+ (1<<OK) | (1<<FAIL) | (1<<FAIL_DROP), /* discard */
+ (1<<OK), /* drop */
+ (1<<FAIL) | (1<<FAIL_DROP), /* require */
+ (1<<OK) /* warn */
+ };
/* ACL condition and modifier codes - keep in step with the table that
follows, and the cond_expand_at_top and uschar cond_modifiers tables lower
ACLC_BMI_OPTIN,
#endif
ACLC_CONDITION,
+ ACLC_CONTINUE,
ACLC_CONTROL,
#ifdef WITH_CONTENT_SCAN
ACLC_DECODE,
#endif
ACLC_VERIFY };
-/* ACL conditions/modifiers: "delay", "control", "endpass", "message",
-"log_message", "log_reject_target", "logwrite", and "set" are modifiers that
-look like conditions but always return TRUE. They are used for their side
-effects. */
+/* ACL conditions/modifiers: "delay", "control", "continue", "endpass",
+"message", "log_message", "log_reject_target", "logwrite", and "set" are
+modifiers that look like conditions but always return TRUE. They are used for
+their side effects. */
static uschar *conditions[] = {
US"acl",
US"bmi_optin",
#endif
US"condition",
+ US"continue",
US"control",
#ifdef WITH_CONTENT_SCAN
US"decode",
#endif
CONTROL_FAKEDEFER,
CONTROL_FAKEREJECT,
- CONTROL_NO_MULTILINE
+ CONTROL_NO_MULTILINE,
+ CONTROL_NO_PIPELINING,
+ CONTROL_NO_DELAY_FLUSH,
+ CONTROL_NO_CALLOUT_FLUSH
};
/* ACL control names; keep in step with the table above! This list is used for
#ifdef WITH_CONTENT_SCAN
US"no_mbox_unspool",
#endif
- US"no_multiline"
+ US"fakedefer",
+ US"fakereject",
+ US"no_multiline_responses",
+ US"no_pipelining",
+ US"no_delay_flush",
+ US"no_callout_flush"
};
-/* Flags to indicate for which conditions /modifiers a string expansion is done
+/* Flags to indicate for which conditions/modifiers a string expansion is done
at the outer level. In the other cases, expansion already occurs in the
checking functions. */
TRUE, /* bmi_optin */
#endif
TRUE, /* condition */
+ TRUE, /* continue */
TRUE, /* control */
#ifdef WITH_CONTENT_SCAN
TRUE, /* decode */
TRUE, /* bmi_optin */
#endif
FALSE, /* condition */
+ TRUE, /* continue */
TRUE, /* control */
#ifdef WITH_CONTENT_SCAN
FALSE, /* decode */
FALSE /* verify */
};
-/* Bit map vector of which conditions are not allowed at certain times. For
-each condition, there's a bitmap of dis-allowed times. For some, it is easier
-to specify the negation of a small number of allowed times. */
+/* Bit map vector of which conditions and modifiers are not allowed at certain
+times. For each condition, there's a bitmap of dis-allowed times. For some, it
+is easier to specify the negation of a small number of allowed times. */
static unsigned int cond_forbids[] = {
0, /* acl */
0, /* condition */
+ 0, /* continue */
+
/* Certain types of control are always allowed, so we let it through
always and check in the control processing itself. */
(1<<ACL_WHERE_MIME)),
(1<<ACL_WHERE_NOTSMTP)| /* no_multiline */
+ (1<<ACL_WHERE_NOTSMTP_START),
+
+ (1<<ACL_WHERE_NOTSMTP)| /* no_pipelining */
+ (1<<ACL_WHERE_NOTSMTP_START),
+
+ (1<<ACL_WHERE_NOTSMTP)| /* no_delay_flush */
+ (1<<ACL_WHERE_NOTSMTP_START),
+
+ (1<<ACL_WHERE_NOTSMTP)| /* no_callout_flush */
(1<<ACL_WHERE_NOTSMTP_START)
};
{ US"caselower_local_part", CONTROL_CASELOWER_LOCAL_PART, FALSE },
{ US"enforce_sync", CONTROL_ENFORCE_SYNC, FALSE },
{ US"freeze", CONTROL_FREEZE, TRUE },
+ { US"no_callout_flush", CONTROL_NO_CALLOUT_FLUSH, FALSE },
+ { US"no_delay_flush", CONTROL_NO_DELAY_FLUSH, FALSE },
{ US"no_enforce_sync", CONTROL_NO_ENFORCE_SYNC, FALSE },
{ US"no_multiline_responses", CONTROL_NO_MULTILINE, FALSE },
+ { US"no_pipelining", CONTROL_NO_PIPELINING, FALSE },
{ US"queue_only", CONTROL_QUEUE_ONLY, FALSE },
#ifdef WITH_CONTENT_SCAN
{ US"no_mbox_unspool", CONTROL_NO_MBOX_UNSPOOL, FALSE },
callout_overall, callout_connect, se_mailfrom, pm_mailfrom, NULL);
HDEBUG(D_acl) debug_printf("----------- end verify ------------\n");
+ *basic_errno = addr2.basic_errno;
*log_msgptr = addr2.message;
*user_msgptr = (addr2.user_message != NULL)?
addr2.user_message : addr2.message;
- *basic_errno = addr2.basic_errno;
+
+ /* Allow details for temporary error if the address is so flagged. */
+ if (testflag((&addr2), af_pass_message)) acl_temp_details = TRUE;
/* Make $address_data visible */
deliver_address_data = addr2.p.address_data;
*log_msgptr = string_sprintf("invalid \"condition\" value \"%s\"", arg);
break;
+ case ACLC_CONTINUE: /* Always succeeds */
+ break;
+
case ACLC_CONTROL:
control_type = decode_control(arg, &p, where, log_msgptr);
no_multiline_responses = TRUE;
break;
+ case CONTROL_NO_PIPELINING:
+ pipelining_enable = FALSE;
+ break;
+
+ case CONTROL_NO_DELAY_FLUSH:
+ disable_delay_flush = TRUE;
+ break;
+
+ case CONTROL_NO_CALLOUT_FLUSH:
+ disable_callout_flush = TRUE;
+ break;
+
case CONTROL_FAKEDEFER:
case CONTROL_FAKEREJECT:
fake_response = (control_type == CONTROL_FAKEDEFER) ? DEFER : FAIL;
can't. The poll() function does not do the right thing, and in any case
it is not always available.
- NOTE: If ever this state of affairs changes, remember that we may be
+ NOTE 1: If ever this state of affairs changes, remember that we may be
dealing with stdin/stdout here, in addition to TCP/IP connections.
- Whatever is done must work in both cases. To detected the stdin/stdout
- case, check for smtp_in or smtp_out being NULL. */
+ Also, delays may be specified for non-SMTP input, where smtp_out and
+ smtp_in will be NULL. Whatever is done must work in all cases.
+
+ NOTE 2: The added feature of flushing the output before a delay must
+ apply only to SMTP input. Hence the test for smtp_out being non-NULL.
+ */
else
{
+ if (smtp_out != NULL && !disable_delay_flush) mac_smtp_fflush();
while (delay > 0) delay = sleep(delay);
}
}
/* If the result is the one for which "message" and/or "log_message" are used,
-handle the values of these options. Most verbs have but a single return for
-which the messages are relevant, but for "discard", it's useful to have the log
-message both when it succeeds and when it fails. Also, for an "accept" that
-appears in a QUIT ACL, we want to handle the user message. Since only "accept"
-and "warn" are permitted in that ACL, we don't need to test the verb.
-
-These modifiers act in different ways:
+handle the values of these modifiers. If there isn't a log message set, we make
+it the same as the user message.
"message" is a user message that will be included in an SMTP response. Unless
it is empty, it overrides any previously set user message.
"log_message" is a non-user message, and it adds to any existing non-user
message that is already set.
-If there isn't a log message set, we make it the same as the user message. */
+Most verbs have but a single return for which the messages are relevant, but
+for "discard", it's useful to have the log message both when it succeeds and
+when it fails. For "accept", the message is used in the OK case if there is no
+"endpass", but (for backwards compatibility) in the FAIL case if "endpass" is
+present. */
+
+if (*epp && rc == OK) user_message = NULL;
-if (((rc == FAIL_DROP)? FAIL : rc) == msgcond[verb] ||
- (verb == ACL_DISCARD && rc == OK) ||
- (where == ACL_WHERE_QUIT))
+if (((1<<rc) & msgcond[verb]) != 0)
{
uschar *expmessage;
+ uschar *old_user_msgptr = *user_msgptr;
+ uschar *old_log_msgptr = (*log_msgptr != NULL)? *log_msgptr : old_user_msgptr;
/* If the verb is "warn", messages generated by conditions (verification or
- nested ACLs) are discarded. Only messages specified at this level are used.
+ nested ACLs) are always discarded. This also happens for acceptance verbs
+ when they actually do accept. Only messages specified at this level are used.
However, the value of an existing message is available in $acl_verify_message
during expansions. */
- uschar *old_user_msgptr = *user_msgptr;
- uschar *old_log_msgptr = (*log_msgptr != NULL)? *log_msgptr : old_user_msgptr;
-
- if (verb == ACL_WARN) *log_msgptr = *user_msgptr = NULL;
+ if (verb == ACL_WARN ||
+ (rc == OK && (verb == ACL_ACCEPT || verb == ACL_DISCARD)))
+ *log_msgptr = *user_msgptr = NULL;
if (user_message != NULL)
{
return ERROR;
}
-/* Before giving an error response, take a look at the length of any user
-message, and split it up into multiple lines if possible. */
-
-if (rc != OK && *user_msgptr != NULL && Ustrlen(*user_msgptr) > 75)
- {
- uschar *s = *user_msgptr = string_copy(*user_msgptr);
- uschar *ss = s;
+/* Before giving a response, take a look at the length of any user message, and
+split it up into multiple lines if possible. */
- for (;;)
- {
- int i = 0;
- while (i < 75 && *ss != 0 && *ss != '\n') ss++, i++;
- if (*ss == 0) break;
- if (*ss == '\n')
- s = ++ss;
- else
- {
- uschar *t = ss + 1;
- uschar *tt = NULL;
- while (--t > s + 35)
- {
- if (*t == ' ')
- {
- if (t[-1] == ':') { tt = t; break; }
- if (tt == NULL) tt = t;
- }
- }
-
- if (tt == NULL) /* Can't split behind - try ahead */
- {
- t = ss + 1;
- while (*t != 0)
- {
- if (*t == ' ' || *t == '\n')
- { tt = t; break; }
- t++;
- }
- }
-
- if (tt == NULL) break; /* Can't find anywhere to split */
- *tt = '\n';
- s = ss = tt+1;
- }
- }
- }
+*user_msgptr = string_split_message(*user_msgptr);
+if (fake_response != OK)
+ fake_response_text = string_split_message(fake_response_text);
return rc;
}
git://git.exim.org / exim.git / blobdiff