/* $Cambridge: exim/src/src/smtp_in.c,v 1.9 2005/01/13 16:15:53 ph10 Exp $ */ /************************************************* * Exim - an Internet mail transport agent * *************************************************/ /* Copyright (c) University of Cambridge 1995 - 2005 */ /* See the file NOTICE for conditions of use and distribution. */ /* Functions for handling an incoming SMTP call. */ #include "exim.h" /* Initialize for TCP wrappers if so configured. It appears that the macro HAVE_IPV6 is used in some versions of the tcpd.h header, so we unset it before including that header, and restore its value afterwards. */ #ifdef USE_TCP_WRAPPERS #if HAVE_IPV6 #define EXIM_HAVE_IPV6 #endif #undef HAVE_IPV6 #include #undef HAVE_IPV6 #ifdef EXIM_HAVE_IPV6 #define HAVE_IPV6 TRUE #endif int allow_severity = LOG_INFO; int deny_severity = LOG_NOTICE; #endif /* Size of buffer for reading SMTP commands */ #define cmd_buffer_size 512 /* Ref. RFC 821 */ /* Size of buffer for reading SMTP incoming packets */ #define in_buffer_size 8192 /* Structure for SMTP command list */ typedef struct { char *name; int len; short int cmd; short int has_arg; short int is_mail_cmd; } smtp_cmd_list; /* Codes for identifying commands. We order them so that those that come first are those for which synchronization is always required. Checking this can help block some spam. */ enum { /* These commands are required to be synchronized, i.e. to be the last in a block of commands when pipelining. */ HELO_CMD, EHLO_CMD, DATA_CMD, /* These are listed in the pipelining */ VRFY_CMD, EXPN_CMD, NOOP_CMD, /* RFC as requiring synchronization */ ETRN_CMD, /* This by analogy with TURN from the RFC */ STARTTLS_CMD, /* Required by the STARTTLS RFC */ /* This is a dummy to identify the non-sync commands when pipelining */ NON_SYNC_CMD_PIPELINING, /* These commands need not be synchronized when pipelining */ MAIL_CMD, RCPT_CMD, RSET_CMD, /* This is a dummy to identify the non-sync commands when not pipelining */ NON_SYNC_CMD_NON_PIPELINING, /* I have been unable to find a statement about the use of pipelining with AUTH, so to be on the safe side it is here, though I kind of feel it should be up there with the synchronized commands. */ AUTH_CMD, /* I'm not sure about these, but I don't think they matter. */ QUIT_CMD, HELP_CMD, /* These are specials that don't correspond to actual commands */ EOF_CMD, OTHER_CMD, BADARG_CMD, BADCHAR_CMD, BADSYN_CMD, TOO_MANY_NONMAIL_CMD }; /************************************************* * Local static variables * *************************************************/ static auth_instance *authenticated_by; static BOOL auth_advertised; #ifdef SUPPORT_TLS static BOOL tls_advertised; #endif static BOOL esmtp; static BOOL helo_required = FALSE; static BOOL helo_verify = FALSE; static BOOL helo_seen; static BOOL helo_accept_junk; static BOOL count_nonmail; static BOOL pipelining_advertised; static int nonmail_command_count; static int synprot_error_count; static int unknown_command_count; static int sync_cmd_limit; static int smtp_write_error = 0; static uschar *smtp_data; static uschar *cmd_buffer; /* We need to know the position of RSET, HELO, EHLO, AUTH, and STARTTLS. Their final fields of all except AUTH are forced TRUE at the start of a new message setup, to allow one of each between messages that is not counted as a nonmail command. (In fact, only one of HELO/EHLO is not counted.) Also, we have to allow a new EHLO after starting up TLS. AUTH is "falsely" labelled as a mail command initially, so that it doesn't get counted. However, the flag is changed when AUTH is received, so that multiple failing AUTHs will eventually hit the limit. After a successful AUTH, another AUTH is already forbidden. After a TLS session is started, AUTH's flag is again forced TRUE, to allow for the re-authentication that can happen at that point. QUIT is also "falsely" labelled as a mail command so that it doesn't up the count of non-mail commands and possibly provoke an error. */ static smtp_cmd_list cmd_list[] = { { "rset", sizeof("rset")-1, RSET_CMD, FALSE, FALSE }, /* First */ { "helo", sizeof("helo")-1, HELO_CMD, TRUE, FALSE }, { "ehlo", sizeof("ehlo")-1, EHLO_CMD, TRUE, FALSE }, { "auth", sizeof("auth")-1, AUTH_CMD, TRUE, TRUE }, #ifdef SUPPORT_TLS { "starttls", sizeof("starttls")-1, STARTTLS_CMD, FALSE, FALSE }, #endif /* If you change anything above here, also fix the definitions below. */ { "mail from:", sizeof("mail from:")-1, MAIL_CMD, TRUE, TRUE }, { "rcpt to:", sizeof("rcpt to:")-1, RCPT_CMD, TRUE, TRUE }, { "data", sizeof("data")-1, DATA_CMD, FALSE, TRUE }, { "quit", sizeof("quit")-1, QUIT_CMD, FALSE, TRUE }, { "noop", sizeof("noop")-1, NOOP_CMD, TRUE, FALSE }, { "etrn", sizeof("etrn")-1, ETRN_CMD, TRUE, FALSE }, { "vrfy", sizeof("vrfy")-1, VRFY_CMD, TRUE, FALSE }, { "expn", sizeof("expn")-1, EXPN_CMD, TRUE, FALSE }, { "help", sizeof("help")-1, HELP_CMD, TRUE, FALSE } }; static smtp_cmd_list *cmd_list_end = cmd_list + sizeof(cmd_list)/sizeof(smtp_cmd_list); #define CMD_LIST_RSET 0 #define CMD_LIST_HELO 1 #define CMD_LIST_EHLO 2 #define CMD_LIST_AUTH 3 #define CMD_LIST_STARTTLS 4 static uschar *protocols[] = { US"local-smtp", /* HELO */ US"local-smtps", /* The rare case EHLO->STARTTLS->HELO */ US"local-esmtp", /* EHLO */ US"local-esmtps", /* EHLO->STARTTLS->EHLO */ US"local-esmtpa", /* EHLO->AUTH */ US"local-esmtpsa" /* EHLO->STARTTLS->EHLO->AUTH */ }; #define pnormal 0 #define pextend 2 #define pcrpted 1 /* added to pextend or pnormal */ #define pauthed 2 /* added to pextend */ #define pnlocal 6 /* offset to remove "local" */ /* When reading SMTP from a remote host, we have to use our own versions of the C input-reading functions, in order to be able to flush the SMTP output only when about to read more data from the socket. This is the only way to get optimal performance when the client is using pipelining. Flushing for every command causes a separate packet and reply packet each time; saving all the responses up (when pipelining) combines them into one packet and one response. For simplicity, these functions are used for *all* SMTP input, not only when receiving over a socket. However, after setting up a secure socket (SSL), input is read via the OpenSSL library, and another set of functions is used instead (see tls.c). These functions are set in the receive_getc etc. variables and called with the same interface as the C functions. However, since there can only ever be one incoming SMTP call, we just use a single buffer and flags. There is no need to implement a complicated private FILE-like structure.*/ static uschar *smtp_inbuffer; static uschar *smtp_inptr; static uschar *smtp_inend; static int smtp_had_eof; static int smtp_had_error; /************************************************* * SMTP version of getc() * *************************************************/ /* This gets the next byte from the SMTP input buffer. If the buffer is empty, it flushes the output, and refills the buffer, with a timeout. The signal handler is set appropriately by the calling function. This function is not used after a connection has negotated itself into an TLS/SSL state. Arguments: none Returns: the next character or EOF */ int smtp_getc(void) { if (smtp_inptr >= smtp_inend) { int rc, save_errno; fflush(smtp_out); if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout); rc = read(fileno(smtp_in), smtp_inbuffer, in_buffer_size); save_errno = errno; alarm(0); if (rc <= 0) { /* Must put the error text in fixed store, because this might be during header reading, where it releases unused store above the header. */ if (rc < 0) { smtp_had_error = save_errno; smtp_read_error = string_copy_malloc( string_sprintf(" (error: %s)", strerror(save_errno))); } else smtp_had_eof = 1; return EOF; } smtp_inend = smtp_inbuffer + rc; smtp_inptr = smtp_inbuffer; } return *smtp_inptr++; } /************************************************* * SMTP version of ungetc() * *************************************************/ /* Puts a character back in the input buffer. Only ever called once. Arguments: ch the character Returns: the character */ int smtp_ungetc(int ch) { *(--smtp_inptr) = ch; return ch; } /************************************************* * SMTP version of feof() * *************************************************/ /* Tests for a previous EOF Arguments: none Returns: non-zero if the eof flag is set */ int smtp_feof(void) { return smtp_had_eof; } /************************************************* * SMTP version of ferror() * *************************************************/ /* Tests for a previous read error, and returns with errno restored to what it was when the error was detected. Arguments: none Returns: non-zero if the error flag is set */ int smtp_ferror(void) { errno = smtp_had_error; return smtp_had_error; } /************************************************* * Write formatted string to SMTP channel * *************************************************/ /* This is a separate function so that we don't have to repeat everything for TLS support or debugging. It is global so that the daemon and the authentication functions can use it. It does not return any error indication, because major problems such as dropped connections won't show up till an output flush for non-TLS connections. The smtp_fflush() function is available for checking that: for convenience, TLS output errors are remembered here so that they are also picked up later by smtp_fflush(). Arguments: format format string ... optional arguments Returns: nothing */ void smtp_printf(char *format, ...) { va_list ap; DEBUG(D_receive) { va_start(ap, format); (void) string_vformat(big_buffer, big_buffer_size, format, ap); debug_printf("SMTP>> %s", big_buffer); } va_start(ap, format); /* If in a TLS session we have to format the string, and then write it using a TLS function. */ #ifdef SUPPORT_TLS if (tls_active >= 0) { if (!string_vformat(big_buffer, big_buffer_size, format, ap)) { log_write(0, LOG_MAIN|LOG_PANIC, "string too large in smtp_printf"); smtp_closedown(US"Unexpected error"); exim_exit(EXIT_FAILURE); } if (tls_write(big_buffer, Ustrlen(big_buffer)) < 0) smtp_write_error = -1; } else #endif /* Otherwise, just use the standard library function. */ if (vfprintf(smtp_out, format, ap) < 0) smtp_write_error = -1; va_end(ap); } /************************************************* * Flush SMTP out and check for error * *************************************************/ /* This function isn't currently used within Exim (it detects errors when it tries to read the next SMTP input), but is available for use in local_scan(). For non-TLS connections, it flushes the output and checks for errors. For TLS-connections, it checks for a previously-detected TLS write error. Arguments: none Returns: 0 for no error; -1 after an error */ int smtp_fflush(void) { if (tls_active < 0 && fflush(smtp_out) != 0) smtp_write_error = -1; return smtp_write_error; } /************************************************* * SMTP command read timeout * *************************************************/ /* Signal handler for timing out incoming SMTP commands. This attempts to finish off tidily. Argument: signal number (SIGALRM) Returns: nothing */ static void command_timeout_handler(int sig) { sig = sig; /* Keep picky compilers happy */ log_write(L_lost_incoming_connection, LOG_MAIN, "SMTP command timeout on%s connection from %s", (tls_active >= 0)? " TLS" : "", host_and_ident(FALSE)); if (smtp_batched_input) moan_smtp_batch(NULL, "421 SMTP command timeout"); /* Does not return */ smtp_printf("421 %s: SMTP command timeout - closing connection\r\n", smtp_active_hostname); mac_smtp_fflush(); exim_exit(EXIT_FAILURE); } /************************************************* * SIGTERM received * *************************************************/ /* Signal handler for handling SIGTERM. Again, try to finish tidily. Argument: signal number (SIGTERM) Returns: nothing */ static void command_sigterm_handler(int sig) { sig = sig; /* Keep picky compilers happy */ log_write(0, LOG_MAIN, "%s closed after SIGTERM", smtp_get_connection_info()); if (smtp_batched_input) moan_smtp_batch(NULL, "421 SIGTERM received"); /* Does not return */ smtp_printf("421 %s: Service not available - closing connection\r\n", smtp_active_hostname); exim_exit(EXIT_FAILURE); } /************************************************* * Read one command line * *************************************************/ /* Strictly, SMTP commands coming over the net are supposed to end with CRLF. There are sites that don't do this, and in any case internal SMTP probably should check only for LF. Consequently, we check here for LF only. The line ends up with [CR]LF removed from its end. If we get an overlong line, treat as an unknown command. The command is read into the static cmd_buffer. The character reading routine sets up a timeout for each block actually read from the input (which may contain more than one command). We set up a special signal handler that closes down the session on a timeout. Control does not return when it runs. Arguments: check_sync if TRUE, check synchronization rules if global option is TRUE Returns: a code identifying the command (enumerated above) */ static int smtp_read_command(BOOL check_sync) { int c; int ptr = 0; smtp_cmd_list *p; BOOL hadnull = FALSE; os_non_restarting_signal(SIGALRM, command_timeout_handler); while ((c = (receive_getc)()) != '\n' && c != EOF) { if (ptr >= cmd_buffer_size) { os_non_restarting_signal(SIGALRM, sigalrm_handler); return OTHER_CMD; } if (c == 0) { hadnull = TRUE; c = '?'; } cmd_buffer[ptr++] = c; } receive_linecount++; /* For BSMTP errors */ os_non_restarting_signal(SIGALRM, sigalrm_handler); /* If hit end of file, return pseudo EOF command. Whether we have a part-line already read doesn't matter, since this is an error state. */ if (c == EOF) return EOF_CMD; /* Remove any CR and white space at the end of the line, and terminate the string. */ while (ptr > 0 && isspace(cmd_buffer[ptr-1])) ptr--; cmd_buffer[ptr] = 0; DEBUG(D_receive) debug_printf("SMTP<< %s\n", cmd_buffer); /* NULLs are not allowed in SMTP commands */ if (hadnull) return BADCHAR_CMD; /* Scan command list and return identity, having set the data pointer to the start of the actual data characters. Check for SMTP synchronization if required. */ for (p = cmd_list; p < cmd_list_end; p++) { if (strncmpic(cmd_buffer, US p->name, p->len) == 0) { if (smtp_inptr < smtp_inend && /* Outstanding input */ p->cmd < sync_cmd_limit && /* Command should sync */ check_sync && /* Local flag set */ smtp_enforce_sync && /* Global flag set */ sender_host_address != NULL && /* Not local input */ !sender_host_notsocket) /* Really is a socket */ return BADSYN_CMD; /* Point after the command, but don't skip over leading spaces till after the following test, so that if it fails, the command name can easily be logged. */ smtp_data = cmd_buffer + p->len; /* Count non-mail commands from those hosts that are controlled in this way. The default is all hosts. We don't waste effort checking the list until we get a non-mail command, but then cache the result to save checking again. If there's a DEFER while checking the host, assume it's in the list. Note that one instance of RSET, EHLO/HELO, and STARTTLS is allowed at the start of each incoming message by fiddling with the value in the table. */ if (!p->is_mail_cmd) { if (count_nonmail == TRUE_UNSET) count_nonmail = verify_check_host(&smtp_accept_max_nonmail_hosts) != FAIL; if (count_nonmail && ++nonmail_command_count > smtp_accept_max_nonmail) return TOO_MANY_NONMAIL_CMD; } /* Get the data pointer over leading spaces and return; if there is no data for a command that expects it, we give the error centrally here. */ while (isspace(*smtp_data)) smtp_data++; return (p->has_arg || *smtp_data == 0)? p->cmd : BADARG_CMD; } } /* Enforce synchronization for unknown commands */ if (smtp_inptr < smtp_inend && /* Outstanding input */ check_sync && /* Local flag set */ smtp_enforce_sync && /* Global flag set */ sender_host_address != NULL && /* Not local input */ !sender_host_notsocket) /* Really is a socket */ return BADSYN_CMD; return OTHER_CMD; } /************************************************* * Forced closedown of call * *************************************************/ /* This function is called from log.c when Exim is dying because of a serious disaster, and also from some other places. If an incoming non-batched SMTP channel is open, it swallows the rest of the incoming message if in the DATA phase, sends the reply string, and gives an error to all subsequent commands except QUIT. The existence of an SMTP call is detected by the non-NULLness of smtp_in. Argument: SMTP reply string to send, excluding the code Returns: nothing */ void smtp_closedown(uschar *message) { if (smtp_in == NULL || smtp_batched_input) return; receive_swallow_smtp(); smtp_printf("421 %s\r\n", message); for (;;) { switch(smtp_read_command(FALSE)) { case EOF_CMD: return; case QUIT_CMD: smtp_printf("221 %s closing connection\r\n", smtp_active_hostname); mac_smtp_fflush(); return; case RSET_CMD: smtp_printf("250 Reset OK\r\n"); break; default: smtp_printf("421 %s\r\n", message); break; } } } /************************************************* * Set up connection info for logging * *************************************************/ /* This function is called when logging information about an SMTP connection. It sets up appropriate source information, depending on the type of connection. Argument: none Returns: a string describing the connection */ uschar * smtp_get_connection_info(void) { if (host_checking) return string_sprintf("SMTP connection from %s", sender_fullhost); if (sender_host_unknown || sender_host_notsocket) return string_sprintf("SMTP connection from %s", sender_ident); if (is_inetd) return string_sprintf("SMTP connection from %s (via inetd)", sender_fullhost); if ((log_extra_selector & LX_incoming_interface) != 0 && interface_address != NULL) return string_sprintf("SMTP connection from %s I=[%s]:%d", sender_fullhost, interface_address, interface_port); return string_sprintf("SMTP connection from %s", sender_fullhost); } /************************************************* * Check HELO line and set sender_helo_name * *************************************************/ /* Check the format of a HELO line. The data for HELO/EHLO is supposed to be the domain name of the sending host, or an ip literal in square brackets. The arrgument is placed in sender_helo_name, which is in malloc store, because it must persist over multiple incoming messages. If helo_accept_junk is set, this host is permitted to send any old junk (needed for some broken hosts). Otherwise, helo_allow_chars can be used for rogue characters in general (typically people want to let in underscores). Argument: s the data portion of the line (already past any white space) Returns: TRUE or FALSE */ static BOOL check_helo(uschar *s) { uschar *start = s; uschar *end = s + Ustrlen(s); BOOL yield = helo_accept_junk; /* Discard any previous helo name */ if (sender_helo_name != NULL) { store_free(sender_helo_name); sender_helo_name = NULL; } /* Skip tests if junk is permitted. */ if (!yield) { /* Allow the new standard form for IPv6 address literals, namely, [IPv6:....], and because someone is bound to use it, allow an equivalent IPv4 form. Allow plain addresses as well. */ if (*s == '[') { if (end[-1] == ']') { end[-1] = 0; if (strncmpic(s, US"[IPv6:", 6) == 0) yield = (string_is_ip_address(s+6, NULL) == 6); else if (strncmpic(s, US"[IPv4:", 6) == 0) yield = (string_is_ip_address(s+6, NULL) == 4); else yield = (string_is_ip_address(s+1, NULL) != 0); end[-1] = ']'; } } /* Non-literals must be alpha, dot, hyphen, plus any non-valid chars that have been configured (usually underscore - sigh). */ else if (*s != 0) { yield = TRUE; while (*s != 0) { if (!isalnum(*s) && *s != '.' && *s != '-' && Ustrchr(helo_allow_chars, *s) == NULL) { yield = FALSE; break; } s++; } } } /* Save argument if OK */ if (yield) sender_helo_name = string_copy_malloc(start); return yield; } /************************************************* * Extract SMTP command option * *************************************************/ /* This function picks the next option setting off the end of smtp_data. It is called for MAIL FROM and RCPT TO commands, to pick off the optional ESMTP things that can appear there. Arguments: name point this at the name value point this at the data string Returns: TRUE if found an option */ static BOOL extract_option(uschar **name, uschar **value) { uschar *n; uschar *v = smtp_data + Ustrlen(smtp_data) -1; while (isspace(*v)) v--; v[1] = 0; while (v > smtp_data && *v != '=' && !isspace(*v)) v--; if (*v != '=') return FALSE; n = v; while(isalpha(n[-1])) n--; if (n[-1] != ' ') return FALSE; n[-1] = 0; *name = n; *v++ = 0; *value = v; return TRUE; } /************************************************* * Reset for new message * *************************************************/ /* This function is called whenever the SMTP session is reset from within either of the setup functions. Argument: the stacking pool storage reset point Returns: nothing */ static void smtp_reset(void *reset_point) { int i; store_reset(reset_point); recipients_list = NULL; rcpt_count = rcpt_defer_count = rcpt_fail_count = raw_recipients_count = recipients_count = recipients_list_max = 0; message_size = -1; acl_warn_headers = NULL; queue_only_policy = FALSE; deliver_freeze = FALSE; /* Can be set by ACL */ fake_reject = FALSE; /* Can be set by ACL */ #ifdef WITH_CONTENT_SCAN no_mbox_unspool = FALSE; /* Can be set by ACL */ #endif submission_mode = FALSE; /* Can be set by ACL */ active_local_from_check = local_from_check; /* Can be set by ACL */ active_local_sender_retain = local_sender_retain; /* Can be set by ACL */ sender_address = NULL; raw_sender = NULL; /* After SMTP rewrite, before qualifying */ sender_address_unrewritten = NULL; /* Set only after verify rewrite */ sender_verified_list = NULL; /* No senders verified */ memset(sender_address_cache, 0, sizeof(sender_address_cache)); memset(sender_domain_cache, 0, sizeof(sender_domain_cache)); authenticated_sender = NULL; #ifdef EXPERIMENTAL_BRIGHTMAIL bmi_run = 0; bmi_verdicts = NULL; #endif #ifdef EXPERIMENTAL_SPF spf_header_comment = NULL; spf_received = NULL; spf_result = NULL; spf_smtp_comment = NULL; #endif body_linecount = body_zerocount = 0; for (i = 0; i < ACL_M_MAX; i++) acl_var[ACL_C_MAX + i] = NULL; /* The message body variables use malloc store. They may be set if this is not the first message in an SMTP session and the previous message caused them to be referenced in an ACL. */ if (message_body != NULL) { store_free(message_body); message_body = NULL; } if (message_body_end != NULL) { store_free(message_body_end); message_body_end = NULL; } /* Warning log messages are also saved in malloc store. They are saved to avoid repetition in the same message, but it seems right to repeat them for different messagess. */ while (acl_warn_logged != NULL) { string_item *this = acl_warn_logged; acl_warn_logged = acl_warn_logged->next; store_free(this); } } /************************************************* * Initialize for incoming batched SMTP message * *************************************************/ /* This function is called from smtp_setup_msg() in the case when smtp_batched_input is true. This happens when -bS is used to pass a whole batch of messages in one file with SMTP commands between them. All errors must be reported by sending a message, and only MAIL FROM, RCPT TO, and DATA are relevant. After an error on a sender, or an invalid recipient, the remainder of the message is skipped. The value of received_protocol is already set. Argument: none Returns: > 0 message successfully started (reached DATA) = 0 QUIT read or end of file reached < 0 should not occur */ static int smtp_setup_batch_msg(void) { int done = 0; void *reset_point = store_get(0); /* Save the line count at the start of each transaction - single commands like HELO and RSET count as whole transactions. */ bsmtp_transaction_linecount = receive_linecount; if ((receive_feof)()) return 0; /* Treat EOF as QUIT */ smtp_reset(reset_point); /* Reset for start of message */ /* Deal with SMTP commands. This loop is exited by setting done to a POSITIVE value. The values are 2 larger than the required yield of the function. */ while (done <= 0) { uschar *errmess; uschar *recipient = NULL; int start, end, sender_domain, recipient_domain; switch(smtp_read_command(FALSE)) { /* The HELO/EHLO commands set sender_address_helo if they have valid data; otherwise they are ignored, except that they do a reset of the state. */ case HELO_CMD: case EHLO_CMD: check_helo(smtp_data); /* Fall through */ case RSET_CMD: smtp_reset(reset_point); bsmtp_transaction_linecount = receive_linecount; break; /* The MAIL FROM command requires an address as an operand. All we do here is to parse it for syntactic correctness. The form "<>" is a special case which converts into an empty string. The start/end pointers in the original are not used further for this address, as it is the canonical extracted address which is all that is kept. */ case MAIL_CMD: if (sender_address != NULL) /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "503 Sender already given"); if (smtp_data[0] == 0) /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "501 MAIL FROM must have an address operand"); /* Reset to start of message */ smtp_reset(reset_point); /* Apply SMTP rewrite */ raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)? rewrite_one(smtp_data, rewrite_smtp|rewrite_smtp_sender, NULL, FALSE, US"", global_rewrite_rules) : smtp_data; /* Extract the address; the TRUE flag allows <> as valid */ raw_sender = parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain, TRUE); if (raw_sender == NULL) /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "501 %s", errmess); sender_address = string_copy(raw_sender); /* Qualify unqualified sender addresses if permitted to do so. */ if (sender_domain == 0 && sender_address[0] != 0 && sender_address[0] != '@') { if (allow_unqualified_sender) { sender_address = rewrite_address_qualify(sender_address, FALSE); DEBUG(D_receive) debug_printf("unqualified address %s accepted " "and rewritten\n", raw_sender); } /* The function moan_smtp_batch() does not return. */ else moan_smtp_batch(cmd_buffer, "501 sender address must contain " "a domain"); } break; /* The RCPT TO command requires an address as an operand. All we do here is to parse it for syntactic correctness. There may be any number of RCPT TO commands, specifying multiple senders. We build them all into a data structure that is in argc/argv format. The start/end values given by parse_extract_address are not used, as we keep only the extracted address. */ case RCPT_CMD: if (sender_address == NULL) /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "503 No sender yet given"); if (smtp_data[0] == 0) /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "501 RCPT TO must have an address operand"); /* Check maximum number allowed */ if (recipients_max > 0 && recipients_count + 1 > recipients_max) /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "%s too many recipients", recipients_max_reject? "552": "452"); /* Apply SMTP rewrite, then extract address. Don't allow "<>" as a recipient address */ recipient = ((rewrite_existflags & rewrite_smtp) != 0)? rewrite_one(smtp_data, rewrite_smtp, NULL, FALSE, US"", global_rewrite_rules) : smtp_data; /* rfc821_domains = TRUE; << no longer needed */ recipient = parse_extract_address(recipient, &errmess, &start, &end, &recipient_domain, FALSE); /* rfc821_domains = FALSE; << no longer needed */ if (recipient == NULL) /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "501 %s", errmess); /* If the recipient address is unqualified, qualify it if permitted. Then add it to the list of recipients. */ if (recipient_domain == 0) { if (allow_unqualified_recipient) { DEBUG(D_receive) debug_printf("unqualified address %s accepted\n", recipient); recipient = rewrite_address_qualify(recipient, TRUE); } /* The function moan_smtp_batch() does not return. */ else moan_smtp_batch(cmd_buffer, "501 recipient address must contain " "a domain"); } receive_add_recipient(recipient, -1); break; /* The DATA command is legal only if it follows successful MAIL FROM and RCPT TO commands. This function is complete when a valid DATA command is encountered. */ case DATA_CMD: if (sender_address == NULL || recipients_count <= 0) { /* The function moan_smtp_batch() does not return. */ if (sender_address == NULL) moan_smtp_batch(cmd_buffer, "503 MAIL FROM: command must precede DATA"); else moan_smtp_batch(cmd_buffer, "503 RCPT TO: must precede DATA"); } else { done = 3; /* DATA successfully achieved */ message_ended = END_NOTENDED; /* Indicate in middle of message */ } break; /* The VRFY, EXPN, HELP, ETRN, and NOOP commands are ignored. */ case VRFY_CMD: case EXPN_CMD: case HELP_CMD: case NOOP_CMD: case ETRN_CMD: bsmtp_transaction_linecount = receive_linecount; break; case EOF_CMD: case QUIT_CMD: done = 2; break; case BADARG_CMD: /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "501 Unexpected argument data"); break; case BADCHAR_CMD: /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "501 Unexpected NULL in SMTP command"); break; default: /* The function moan_smtp_batch() does not return. */ moan_smtp_batch(cmd_buffer, "500 Command unrecognized"); break; } } return done - 2; /* Convert yield values */ } /************************************************* * Start an SMTP session * *************************************************/ /* This function is called at the start of an SMTP session. Thereafter, smtp_setup_msg() is called to initiate each separate message. This function does host-specific testing, and outputs the banner line. Arguments: none Returns: FALSE if the session can not continue; something has gone wrong, or the connection to the host is blocked */ BOOL smtp_start_session(void) { int size = 256; int i, ptr; uschar *p, *s, *ss; /* If we are running in the test harness, and the incoming call is from 127.0.0.2 (sic), have a short delay. This makes it possible to test handling of input sent too soon (before the banner is output). */ if (running_in_test_harness && Ustrcmp(sender_host_address, "127.0.0.2") == 0) sleep(1); /* Default values for certain variables */ helo_seen = esmtp = helo_accept_junk = FALSE; count_nonmail = TRUE_UNSET; synprot_error_count = unknown_command_count = nonmail_command_count = 0; smtp_delay_mail = smtp_rlm_base; auth_advertised = FALSE; pipelining_advertised = FALSE; sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING; memset(sender_host_cache, 0, sizeof(sender_host_cache)); sender_host_authenticated = NULL; authenticated_by = NULL; #ifdef SUPPORT_TLS tls_cipher = tls_peerdn = NULL; tls_advertised = FALSE; #endif /* Reset ACL connection variables */ for (i = 0; i < ACL_C_MAX; i++) acl_var[i] = NULL; cmd_buffer = (uschar *)malloc(cmd_buffer_size + 1); /* allow for trailing 0 */ if (cmd_buffer == NULL) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "malloc() failed for SMTP command buffer"); /* For batched input, the protocol setting can be overridden from the command line by a trusted caller. */ if (smtp_batched_input) { if (received_protocol == NULL) received_protocol = US"local-bsmtp"; } /* For non-batched SMTP input, the protocol setting is forced here. It will be reset later if any of EHLO/AUTH/STARTTLS are received. */ else received_protocol = protocols[pnormal] + ((sender_host_address != NULL)? pnlocal : 0); /* Set up the buffer for inputting using direct read() calls, and arrange to call the local functions instead of the standard C ones. */ smtp_inbuffer = (uschar *)malloc(in_buffer_size); if (smtp_inbuffer == NULL) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "malloc() failed for SMTP input buffer"); receive_getc = smtp_getc; receive_ungetc = smtp_ungetc; receive_feof = smtp_feof; receive_ferror = smtp_ferror; smtp_inptr = smtp_inend = smtp_inbuffer; smtp_had_eof = smtp_had_error = 0; /* Set up the message size limit; this may be host-specific */ thismessage_size_limit = expand_string_integer(message_size_limit); if (thismessage_size_limit < 0) { if (thismessage_size_limit == -1) log_write(0, LOG_MAIN|LOG_PANIC, "unable to expand message_size_limit: " "%s", expand_string_message); else log_write(0, LOG_MAIN|LOG_PANIC, "invalid message_size_limit: " "%s", expand_string_message); smtp_closedown(US"Temporary local problem - please try later"); return FALSE; } /* When a message is input locally via the -bs or -bS options, sender_host_ unknown is set unless -oMa was used to force an IP address, in which case it is checked like a real remote connection. When -bs is used from inetd, this flag is not set, causing the sending host to be checked. The code that deals with IP source routing (if configured) is never required for -bs or -bS and the flag sender_host_notsocket is used to suppress it. If smtp_accept_max and smtp_accept_reserve are set, keep some connections in reserve for certain hosts and/or networks. */ if (!sender_host_unknown) { int rc; BOOL reserved_host = FALSE; /* Look up IP options (source routing info) on the socket if this is not an -oMa "host", and if any are found, log them and drop the connection. Linux (and others now, see below) is different to everyone else, so there has to be some conditional compilation here. Versions of Linux before 2.1.15 used a structure whose name was "options". Somebody finally realized that this name was silly, and it got changed to "ip_options". I use the newer name here, but there is a fudge in the script that sets up os.h to define a macro in older Linux systems. Sigh. Linux is a fast-moving target. Another generation of Linux uses glibc 2, which has chosen ip_opts for the structure name. This is now really a glibc thing rather than a Linux thing, so the condition name has been changed to reflect this. It is relevant also to GNU/Hurd. Mac OS 10.x (Darwin) is like the later glibc versions, but without the setting of the __GLIBC__ macro, so we can't detect it automatically. There's a special macro defined in the os.h file. Some DGUX versions on older hardware appear not to support IP options at all, so there is now a general macro which can be set to cut out this support altogether. How to do this properly in IPv6 is not yet known. */ #if !HAVE_IPV6 && !defined(NO_IP_OPTIONS) #ifdef GLIBC_IP_OPTIONS #if (!defined __GLIBC__) || (__GLIBC__ < 2) #define OPTSTYLE 1 #else #define OPTSTYLE 2 #endif #elif defined DARWIN_IP_OPTIONS #define OPTSTYLE 2 #else #define OPTSTYLE 3 #endif if (!host_checking && !sender_host_notsocket) { #if OPTSTYLE == 1 SOCKLEN_T optlen = sizeof(struct ip_options) + MAX_IPOPTLEN; struct ip_options *ipopt = store_get(optlen); #elif OPTSTYLE == 2 struct ip_opts ipoptblock; struct ip_opts *ipopt = &ipoptblock; SOCKLEN_T optlen = sizeof(ipoptblock); #else struct ipoption ipoptblock; struct ipoption *ipopt = &ipoptblock; SOCKLEN_T optlen = sizeof(ipoptblock); #endif /* Occasional genuine failures of getsockopt() have been seen - for example, "reset by peer". Therefore, just log and give up on this call, unless the error is ENOPROTOOPT. This error is given by systems that have the interfaces but not the mechanism - e.g. GNU/Hurd at the time of writing. So for that error, carry on - we just can't do an IP options check. */ DEBUG(D_receive) debug_printf("checking for IP options\n"); if (getsockopt(fileno(smtp_out), IPPROTO_IP, IP_OPTIONS, (uschar *)(ipopt), &optlen) < 0) { if (errno != ENOPROTOOPT) { log_write(0, LOG_MAIN, "getsockopt() failed from %s: %s", host_and_ident(FALSE), strerror(errno)); smtp_printf("451 SMTP service not available\r\n"); return FALSE; } } /* Deal with any IP options that are set. On the systems I have looked at, the value of MAX_IPOPTLEN has been 40, meaning that there should never be more logging data than will fit in big_buffer. Nevertheless, after somebody questioned this code, I've added in some paranoid checking. */ else if (optlen > 0) { uschar *p = big_buffer; uschar *pend = big_buffer + big_buffer_size; uschar *opt, *adptr; int optcount; struct in_addr addr; #if OPTSTYLE == 1 uschar *optstart = (uschar *)(ipopt->__data); #elif OPTSTYLE == 2 uschar *optstart = (uschar *)(ipopt->ip_opts); #else uschar *optstart = (uschar *)(ipopt->ipopt_list); #endif DEBUG(D_receive) debug_printf("IP options exist\n"); Ustrcpy(p, "IP options on incoming call:"); p += Ustrlen(p); for (opt = optstart; opt != NULL && opt < (uschar *)(ipopt) + optlen;) { switch (*opt) { case IPOPT_EOL: opt = NULL; break; case IPOPT_NOP: opt++; break; case IPOPT_SSRR: case IPOPT_LSRR: if (!string_format(p, pend-p, " %s [@%s", (*opt == IPOPT_SSRR)? "SSRR" : "LSRR", #if OPTSTYLE == 1 inet_ntoa(*((struct in_addr *)(&(ipopt->faddr)))))) #elif OPTSTYLE == 2 inet_ntoa(ipopt->ip_dst))) #else inet_ntoa(ipopt->ipopt_dst))) #endif { opt = NULL; break; } p += Ustrlen(p); optcount = (opt[1] - 3) / sizeof(struct in_addr); adptr = opt + 3; while (optcount-- > 0) { memcpy(&addr, adptr, sizeof(addr)); if (!string_format(p, pend - p - 1, "%s%s", (optcount == 0)? ":" : "@", inet_ntoa(addr))) { opt = NULL; break; } p += Ustrlen(p); adptr += sizeof(struct in_addr); } *p++ = ']'; opt += opt[1]; break; default: { int i; if (pend - p < 4 + 3*opt[1]) { opt = NULL; break; } Ustrcat(p, "[ "); p += 2; for (i = 0; i < opt[1]; i++) { sprintf(CS p, "%2.2x ", opt[i]); p += 3; } *p++ = ']'; } opt += opt[1]; break; } } *p = 0; log_write(0, LOG_MAIN, "%s", big_buffer); /* Refuse any call with IP options. This is what tcpwrappers 7.5 does. */ log_write(0, LOG_MAIN|LOG_REJECT, "connection from %s refused (IP options)", host_and_ident(FALSE)); smtp_printf("554 SMTP service not available\r\n"); return FALSE; } /* Length of options = 0 => there are no options */ else DEBUG(D_receive) debug_printf("no IP options found\n"); } #endif /* HAVE_IPV6 && !defined(NO_IP_OPTIONS) */ /* Set keep-alive in socket options. The option is on by default. This setting is an attempt to get rid of some hanging connections that stick in read() when the remote end (usually a dialup) goes away. */ if (smtp_accept_keepalive && !sender_host_notsocket) ip_keepalive(fileno(smtp_out), sender_host_address, FALSE); /* If the current host matches host_lookup, set the name by doing a reverse lookup. On failure, sender_host_name will be NULL and host_lookup_failed will be TRUE. This may or may not be serious - optional checks later. */ if (verify_check_host(&host_lookup) == OK) { (void)host_name_lookup(); host_build_sender_fullhost(); } /* Delay this until we have the full name, if it is looked up. */ set_process_info("handling incoming connection from %s", host_and_ident(FALSE)); /* Start up TLS if tls_on_connect is set. This is for supporting the legacy smtps port for use with older style SSL MTAs. */ #ifdef SUPPORT_TLS if (tls_on_connect && tls_server_start(tls_require_ciphers) != OK) return FALSE; #endif /* Test for explicit connection rejection */ if (verify_check_host(&host_reject_connection) == OK) { log_write(L_connection_reject, LOG_MAIN|LOG_REJECT, "refused connection " "from %s (host_reject_connection)", host_and_ident(FALSE)); smtp_printf("554 SMTP service not available\r\n"); return FALSE; } /* Test with TCP Wrappers if so configured */ #ifdef USE_TCP_WRAPPERS if (!hosts_ctl("exim", (sender_host_name == NULL)? STRING_UNKNOWN : CS sender_host_name, (sender_host_address == NULL)? STRING_UNKNOWN : CS sender_host_address, (sender_ident == NULL)? STRING_UNKNOWN : CS sender_ident)) { HDEBUG(D_receive) debug_printf("tcp wrappers rejection\n"); log_write(L_connection_reject, LOG_MAIN|LOG_REJECT, "refused connection from %s " "(tcp wrappers)", host_and_ident(FALSE)); smtp_printf("554 SMTP service not available\r\n"); return FALSE; } #endif /* Check for reserved slots. Note that the count value doesn't include this process, as it gets upped in the parent process. */ if (smtp_accept_max > 0 && smtp_accept_count + 1 > smtp_accept_max - smtp_accept_reserve) { if ((rc = verify_check_host(&smtp_reserve_hosts)) != OK) { log_write(L_connection_reject, LOG_MAIN, "temporarily refused connection from %s: not in " "reserve list: connected=%d max=%d reserve=%d%s", host_and_ident(FALSE), smtp_accept_count, smtp_accept_max, smtp_accept_reserve, (rc == DEFER)? " (lookup deferred)" : ""); smtp_printf("421 %s: Too many concurrent SMTP connections; " "please try again later\r\n", smtp_active_hostname); return FALSE; } reserved_host = TRUE; } /* If a load level above which only messages from reserved hosts are accepted is set, check the load. For incoming calls via the daemon, the check is done in the superior process if there are no reserved hosts, to save a fork. In all cases, the load average will already be available in a global variable at this point. */ if (smtp_load_reserve >= 0 && load_average > smtp_load_reserve && !reserved_host && verify_check_host(&smtp_reserve_hosts) != OK) { log_write(L_connection_reject, LOG_MAIN, "temporarily refused connection from %s: not in " "reserve list and load average = %.2f", host_and_ident(FALSE), (double)load_average/1000.0); smtp_printf("421 %s: Too much load; please try again later\r\n", smtp_active_hostname); return FALSE; } /* Determine whether unqualified senders or recipients are permitted for this host. Unfortunately, we have to do this every time, in order to set the flags so that they can be inspected when considering qualifying addresses in the headers. For a site that permits no qualification, this won't take long, however. */ allow_unqualified_sender = verify_check_host(&sender_unqualified_hosts) == OK; allow_unqualified_recipient = verify_check_host(&recipient_unqualified_hosts) == OK; /* Determine whether HELO/EHLO is required for this host. The requirement can be hard or soft. */ helo_required = verify_check_host(&helo_verify_hosts) == OK; if (!helo_required) helo_verify = verify_check_host(&helo_try_verify_hosts) == OK; /* Determine whether this hosts is permitted to send syntactic junk after a HELO or EHLO command. */ helo_accept_junk = verify_check_host(&helo_accept_junk_hosts) == OK; } /* For batch SMTP input we are now done. */ if (smtp_batched_input) return TRUE; /* Run the ACL if it exists */ if (acl_smtp_connect != NULL) { int rc; uschar *user_msg, *log_msg; smtp_data = US"in \"connect\" ACL"; /* For logged failure message */ rc = acl_check(ACL_WHERE_CONNECT, US"", acl_smtp_connect, &user_msg, &log_msg); if (rc != OK) { (void)smtp_handle_acl_fail(ACL_WHERE_CONNECT, rc, user_msg, log_msg); return FALSE; } } /* Output the initial message for a two-way SMTP connection. It may contain newlines, which then cause a multi-line response to be given. */ s = expand_string(smtp_banner); if (s == NULL) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" (smtp_banner) " "failed: %s", smtp_banner, expand_string_message); /* Remove any terminating newlines; might as well remove trailing space too */ p = s + Ustrlen(s); while (p > s && isspace(p[-1])) p--; *p = 0; /* It seems that CC:Mail is braindead, and assumes that the greeting message is all contained in a single IP packet. The original code wrote out the greeting using several calls to fprint/fputc, and on busy servers this could cause it to be split over more than one packet - which caused CC:Mail to fall over when it got the second part of the greeting after sending its first command. Sigh. To try to avoid this, build the complete greeting message first, and output it in one fell swoop. This gives a better chance of it ending up as a single packet. */ ss = store_get(size); ptr = 0; p = s; do /* At least once, in case we have an empty string */ { int len; uschar *linebreak = Ustrchr(p, '\n'); if (linebreak == NULL) { len = Ustrlen(p); ss = string_cat(ss, &size, &ptr, US"220 ", 4); } else { len = linebreak - p; ss = string_cat(ss, &size, &ptr, US"220-", 4); } ss = string_cat(ss, &size, &ptr, p, len); ss = string_cat(ss, &size, &ptr, US"\r\n", 2); p += len; if (linebreak != NULL) p++; } while (*p != 0); ss[ptr] = 0; /* string_cat leaves room for this */ /* Before we write the banner, check that there is no input pending, unless this synchronisation check is disabled. */ if (smtp_enforce_sync && sender_host_address != NULL && !sender_host_notsocket) { fd_set fds; struct timeval tzero; tzero.tv_sec = 0; tzero.tv_usec = 0; FD_ZERO(&fds); FD_SET(fileno(smtp_in), &fds); if (select(fileno(smtp_in) + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tzero) > 0) { int rc = read(fileno(smtp_in), smtp_inbuffer, in_buffer_size); if (rc > 150) rc = 150; smtp_inbuffer[rc] = 0; log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol violation: " "synchronization error (input sent without waiting for greeting): " "rejected connection from %s input=\"%s\"", host_and_ident(TRUE), string_printing(smtp_inbuffer)); smtp_printf("554 SMTP synchronization error\r\n"); return FALSE; } } /* Now output the banner */ smtp_printf("%s", ss); return TRUE; } /************************************************* * Handle SMTP syntax and protocol errors * *************************************************/ /* Write to the log for SMTP syntax errors in incoming commands, if configured to do so. Then transmit the error response. The return value depends on the number of syntax and protocol errors in this SMTP session. Arguments: type error type, given as a log flag bit code response code; <= 0 means don't send a response data data to reflect in the response (can be NULL) errmess the error message Returns: -1 limit of syntax/protocol errors NOT exceeded +1 limit of syntax/protocol errors IS exceeded These values fit in with the values of the "done" variable in the main processing loop in smtp_setup_msg(). */ static int synprot_error(int type, int code, uschar *data, uschar *errmess) { int yield = -1; log_write(type, LOG_MAIN, "SMTP %s error in \"%s\" %s %s", (type == L_smtp_syntax_error)? "syntax" : "protocol", string_printing(cmd_buffer), host_and_ident(TRUE), errmess); if (++synprot_error_count > smtp_max_synprot_errors) { yield = 1; log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many " "syntax or protocol errors (last command was \"%s\")", host_and_ident(FALSE), cmd_buffer); } if (code > 0) { smtp_printf("%d%c%s%s%s\r\n", code, (yield == 1)? '-' : ' ', (data == NULL)? US"" : data, (data == NULL)? US"" : US": ", errmess); if (yield == 1) smtp_printf("%d Too many syntax or protocol errors\r\n", code); } return yield; } /************************************************* * Log incomplete transactions * *************************************************/ /* This function is called after a transaction has been aborted by RSET, QUIT, connection drops or other errors. It logs the envelope information received so far in order to preserve address verification attempts. Argument: string to indicate what aborted the transaction Returns: nothing */ static void incomplete_transaction_log(uschar *what) { if (sender_address == NULL || /* No transaction in progress */ (log_write_selector & L_smtp_incomplete_transaction) == 0 /* Not logging */ ) return; /* Build list of recipients for logging */ if (recipients_count > 0) { int i; raw_recipients = store_get(recipients_count * sizeof(uschar *)); for (i = 0; i < recipients_count; i++) raw_recipients[i] = recipients_list[i].address; raw_recipients_count = recipients_count; } log_write(L_smtp_incomplete_transaction, LOG_MAIN|LOG_SENDER|LOG_RECIPIENTS, "%s incomplete transaction (%s)", host_and_ident(TRUE), what); } /************************************************* * Send SMTP response, possibly multiline * *************************************************/ /* There are, it seems, broken clients out there that cannot handle multiline responses. If no_multiline_responses is TRUE (it can be set from an ACL), we output nothing for non-final calls, and only the first line for anything else. Arguments: code SMTP code final FALSE if the last line isn't the final line msg message text, possibly containing newlines Returns: nothing */ void smtp_respond(int code, BOOL final, uschar *msg) { if (!final && no_multiline_responses) return; for (;;) { uschar *nl = Ustrchr(msg, '\n'); if (nl == NULL) { smtp_printf("%d%c%s\r\n", code, final? ' ':'-', msg); return; } else if (nl[1] == 0 || no_multiline_responses) { smtp_printf("%d%c%.*s\r\n", code, final? ' ':'-', (int)(nl - msg), msg); return; } else { smtp_printf("%d-%.*s\r\n", code, (int)(nl - msg), msg); msg = nl + 1; while (isspace(*msg)) msg++; } } } /************************************************* * Handle an ACL failure * *************************************************/ /* This function is called when acl_check() fails. As well as calls from within this module, it is called from receive.c for an ACL after DATA. It sorts out logging the incident, and sets up the error response. A message containing newlines is turned into a multiline SMTP response, but for logging, only the first line is used. There's a table of the response codes to use in globals.c, along with the table of names. VFRY is special. Despite RFC1123 it defaults disabled in Exim. However, discussion in connection with RFC 821bis (aka RFC 2821) has concluded that the response should be 252 in the disabled state, because there are broken clients that try VRFY before RCPT. A 5xx response should be given only when the address is positively known to be undeliverable. Sigh. Also, for ETRN, 458 is given on refusal, and for AUTH, 503. Arguments: where where the ACL was called from rc the failure code user_msg a message that can be included in an SMTP response log_msg a message for logging Returns: 0 in most cases 2 if the failure code was FAIL_DROP, in which case the SMTP connection should be dropped (this value fits with the "done" variable in smtp_setup_msg() below) */ int smtp_handle_acl_fail(int where, int rc, uschar *user_msg, uschar *log_msg) { int code = acl_wherecodes[where]; BOOL drop = rc == FAIL_DROP; uschar *lognl; uschar *sender_info = US""; uschar *what = (where == ACL_WHERE_PREDATA)? US"DATA" : #ifdef WITH_CONTENT_SCAN (where == ACL_WHERE_MIME)? US"during MIME ACL checks" : #endif (where == ACL_WHERE_DATA)? US"after DATA" : string_sprintf("%s %s", acl_wherenames[where], smtp_data); if (drop) rc = FAIL; /* We used to have sender_address here; however, there was a bug that was not updating sender_address after a rewrite during a verify. When this bug was fixed, sender_address at this point became the rewritten address. I'm not sure this is what should be logged, so I've changed to logging the unrewritten address to retain backward compatibility. */ #ifndef WITH_CONTENT_SCAN if (where == ACL_WHERE_RCPT || where == ACL_WHERE_DATA) #else if (where == ACL_WHERE_RCPT || where == ACL_WHERE_DATA || where == ACL_WHERE_MIME) #endif { sender_info = string_sprintf("F=<%s> ", (sender_address_unrewritten != NULL)? sender_address_unrewritten : sender_address); } /* If there's been a sender verification failure with a specific message, and we have not sent a response about it yet, do so now, as a preliminary line for failures, but not defers. However, log it in both cases. */ if (sender_verified_failed != NULL && !testflag(sender_verified_failed, af_sverify_told)) { setflag(sender_verified_failed, af_sverify_told); log_write(0, LOG_MAIN|LOG_REJECT, "%s sender verify %s for <%s>%s", host_and_ident(TRUE), ((sender_verified_failed->special_action & 255) == DEFER)? "defer" : "fail", sender_verified_failed->address, (sender_verified_failed->message == NULL)? US"" : string_sprintf(": %s", sender_verified_failed->message)); if (rc == FAIL && sender_verified_failed->user_message != NULL) smtp_respond(code, FALSE, string_sprintf( testflag(sender_verified_failed, af_verify_pmfail)? "Postmaster verification failed while checking <%s>\n%s\n" "Several RFCs state that you are required to have a postmaster\n" "mailbox for each mail domain. This host does not accept mail\n" "from domains whose servers reject the postmaster address." : testflag(sender_verified_failed, af_verify_nsfail)? "Callback setup failed while verifying <%s>\n%s\n" "The initial connection, or a HELO or MAIL FROM:<> command was\n" "rejected. Refusing MAIL FROM:<> does not help fight spam, disregards\n" "RFC requirements, and stops you from receiving standard bounce\n" "messages. This host does not accept mail from domains whose servers\n" "refuse bounces." : "Verification failed for <%s>\n%s", sender_verified_failed->address, sender_verified_failed->user_message)); } /* Sort out text for logging */ log_msg = (log_msg == NULL)? US"" : string_sprintf(": %s", log_msg); lognl = Ustrchr(log_msg, '\n'); if (lognl != NULL) *lognl = 0; /* Send permanent failure response to the command, but the code used isn't always a 5xx one - see comments at the start of this function. If the original rc was FAIL_DROP we drop the connection and yield 2. */ if (rc == FAIL) smtp_respond(code, TRUE, (user_msg == NULL)? US"Administrative prohibition" : user_msg); /* Send temporary failure response to the command. Don't give any details, unless acl_temp_details is set. This is TRUE for a callout defer, a "defer" verb, and for a header verify when smtp_return_error_details is set. This conditional logic is all somewhat of a mess because of the odd interactions between temp_details and return_error_details. One day it should be re-implemented in a tidier fashion. */ else { if (acl_temp_details && user_msg != NULL) { if (smtp_return_error_details && sender_verified_failed != NULL && sender_verified_failed->message != NULL) { smtp_respond(451, FALSE, sender_verified_failed->message); } smtp_respond(451, TRUE, user_msg); } else smtp_printf("451 Temporary local problem - please try later\r\n"); } /* Log the incident. If the connection is not forcibly to be dropped, return 0. Otherwise, log why it is closing if required and return 2. */ log_write(0, LOG_MAIN|LOG_REJECT, "%s %s%srejected %s%s", host_and_ident(TRUE), sender_info, (rc == FAIL)? US"" : US"temporarily ", what, log_msg); if (!drop) return 0; log_write(L_smtp_connection, LOG_MAIN, "%s closed by DROP in ACL", smtp_get_connection_info()); return 2; } /************************************************* * Initialize for SMTP incoming message * *************************************************/ /* This function conducts the initial dialogue at the start of an incoming SMTP message, and builds a list of recipients. However, if the incoming message is part of a batch (-bS option) a separate function is called since it would be messy having tests splattered about all over this function. This function therefore handles the case where interaction is occurring. The input and output files are set up in smtp_in and smtp_out. The global recipients_list is set to point to a vector of recipient_item blocks, whose number is given by recipients_count. This is extended by the receive_add_recipient() function. The global variable sender_address is set to the sender's address. The yield is +1 if a message has been successfully started, 0 if a QUIT command was encountered or the connection was refused from the particular host, or -1 if the connection was lost. Argument: none Returns: > 0 message successfully started (reached DATA) = 0 QUIT read or end of file reached or call refused < 0 lost connection */ int smtp_setup_msg(void) { int done = 0; BOOL toomany = FALSE; BOOL discarded = FALSE; BOOL last_was_rej_mail = FALSE; BOOL last_was_rcpt = FALSE; void *reset_point = store_get(0); DEBUG(D_receive) debug_printf("smtp_setup_msg entered\n"); /* Reset for start of new message. We allow one RSET not to be counted as a nonmail command, for those MTAs that insist on sending it between every message. Ditto for EHLO/HELO and for STARTTLS, to allow for going in and out of TLS between messages (an Exim client may do this if it has messages queued up for the host). Note: we do NOT reset AUTH at this point. */ smtp_reset(reset_point); message_ended = END_NOTSTARTED; cmd_list[CMD_LIST_RSET].is_mail_cmd = TRUE; cmd_list[CMD_LIST_HELO].is_mail_cmd = TRUE; cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE; #ifdef SUPPORT_TLS cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = TRUE; #endif /* Set the local signal handler for SIGTERM - it tries to end off tidily */ os_non_restarting_signal(SIGTERM, command_sigterm_handler); /* Batched SMTP is handled in a different function. */ if (smtp_batched_input) return smtp_setup_batch_msg(); /* Deal with SMTP commands. This loop is exited by setting done to a POSITIVE value. The values are 2 larger than the required yield of the function. */ while (done <= 0) { uschar **argv; uschar *etrn_command; uschar *etrn_serialize_key; uschar *errmess; uschar *user_msg, *log_msg; uschar *recipient = NULL; uschar *hello = NULL; uschar *set_id = NULL; uschar *s, *ss; BOOL was_rej_mail = FALSE; BOOL was_rcpt = FALSE; void (*oldsignal)(int); pid_t pid; int start, end, sender_domain, recipient_domain; int ptr, size, rc; int c; auth_instance *au; switch(smtp_read_command(TRUE)) { /* The AUTH command is not permitted to occur inside a transaction, and may occur successfully only once per connection, and then only when we've advertised it. Actually, that isn't quite true. When TLS is started, all previous information about a connection must be discarded, so a new AUTH is permitted at that time. AUTH is initially labelled as a "nonmail command" so that one occurrence doesn't get counted. We change the label here so that multiple failing AUTHS will eventually hit the nonmail threshold. */ case AUTH_CMD: authentication_failed = TRUE; cmd_list[CMD_LIST_AUTH].is_mail_cmd = FALSE; if (!auth_advertised) { done = synprot_error(L_smtp_protocol_error, 503, NULL, US"AUTH command used when not advertised"); break; } if (sender_host_authenticated != NULL) { done = synprot_error(L_smtp_protocol_error, 503, NULL, US"already authenticated"); break; } if (sender_address != NULL) { done = synprot_error(L_smtp_protocol_error, 503, NULL, US"not permitted in mail transaction"); break; } /* Check the ACL */ if (acl_smtp_auth != NULL) { rc = acl_check(ACL_WHERE_AUTH, smtp_data, acl_smtp_auth, &user_msg, &log_msg); if (rc != OK) { done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg); break; } } /* Find the name of the requested authentication mechanism. */ s = smtp_data; while ((c = *smtp_data) != 0 && !isspace(c)) { if (!isalnum(c) && c != '-' && c != '_') { done = synprot_error(L_smtp_syntax_error, 501, NULL, US"invalid character in authentication mechanism name"); goto COMMAND_LOOP; } smtp_data++; } /* If not at the end of the line, we must be at white space. Terminate the name and move the pointer on to any data that may be present. */ if (*smtp_data != 0) { *smtp_data++ = 0; while (isspace(*smtp_data)) smtp_data++; } /* Search for an authentication mechanism which is configured for use as a server and which has been advertised. */ for (au = auths; au != NULL; au = au->next) { if (strcmpic(s, au->public_name) == 0 && au->server && au->advertised) break; } if (au == NULL) { done = synprot_error(L_smtp_protocol_error, 504, NULL, string_sprintf("%s authentication mechanism not supported", s)); break; } /* Run the checking code, passing the remainder of the command line as data. Initialize $0 empty. The authenticator may set up other numeric variables. Afterwards, have a go at expanding the set_id string, even if authentication failed - for bad passwords it can be useful to log the userid. On success, require set_id to expand and exist, and put it in authenticated_id. Save this in permanent store, as the working store gets reset at HELO, RSET, etc. */ expand_nmax = 0; expand_nlength[0] = 0; /* $0 contains nothing */ c = (au->info->servercode)(au, smtp_data); if (au->set_id != NULL) set_id = expand_string(au->set_id); expand_nmax = -1; /* Reset numeric variables */ /* For the non-OK cases, set up additional logging data if set_id is not empty. */ if (c != OK) { if (set_id != NULL && *set_id != 0) set_id = string_sprintf(" (set_id=%s)", set_id); else set_id = US""; } /* Switch on the result */ switch(c) { case OK: if (au->set_id == NULL || set_id != NULL) /* Complete success */ { if (set_id != NULL) authenticated_id = string_copy_malloc(set_id); sender_host_authenticated = au->name; authentication_failed = FALSE; received_protocol = protocols[pextend + pauthed + ((tls_active >= 0)? pcrpted:0)] + ((sender_host_address != NULL)? pnlocal : 0); s = ss = US"235 Authentication succeeded"; authenticated_by = au; break; } /* Authentication succeeded, but we failed to expand the set_id string. Treat this as a temporary error. */ auth_defer_msg = expand_string_message; /* Fall through */ case DEFER: s = string_sprintf("435 Unable to authenticate at present%s", auth_defer_user_msg); ss = string_sprintf("435 Unable to authenticate at present%s: %s", set_id, auth_defer_msg); break; case BAD64: s = ss = US"501 Invalid base64 data"; break; case CANCELLED: s = ss = US"501 Authentication cancelled"; break; case UNEXPECTED: s = ss = US"553 Initial data not expected"; break; case FAIL: s = US"535 Incorrect authentication data"; ss = string_sprintf("535 Incorrect authentication data%s", set_id); break; default: s = US"435 Internal error"; ss = string_sprintf("435 Internal error%s: return %d from authentication " "check", set_id, c); break; } smtp_printf("%s\r\n", s); if (c != OK) log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s", au->name, host_and_ident(FALSE), ss); break; /* AUTH_CMD */ /* The HELO/EHLO commands are permitted to appear in the middle of a session as well as at the beginning. They have the effect of a reset in addition to their other functions. Their absence at the start cannot be taken to be an error. RFC 2821 says: If the EHLO command is not acceptable to the SMTP server, 501, 500, or 502 failure replies MUST be returned as appropriate. The SMTP server MUST stay in the same state after transmitting these replies that it was in before the EHLO was received. Therefore, we do not do the reset until after checking the command for acceptability. This change was made for Exim release 4.11. Previously it did the reset first. */ case HELO_CMD: hello = US"HELO"; esmtp = FALSE; goto HELO_EHLO; case EHLO_CMD: hello = US"EHLO"; esmtp = TRUE; HELO_EHLO: /* Common code for HELO and EHLO */ cmd_list[CMD_LIST_HELO].is_mail_cmd = FALSE; cmd_list[CMD_LIST_EHLO].is_mail_cmd = FALSE; /* Reject the HELO if its argument was invalid or non-existent. A successful check causes the argument to be saved in malloc store. */ if (!check_helo(smtp_data)) { smtp_printf("501 Syntactically invalid %s argument(s)\r\n", hello); log_write(0, LOG_MAIN|LOG_REJECT, "rejected %s from %s: syntactically " "invalid argument(s): %s", hello, host_and_ident(FALSE), (*smtp_data == 0)? US"(no argument given)" : string_printing(smtp_data)); if (++synprot_error_count > smtp_max_synprot_errors) { log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many " "syntax or protocol errors (last command was \"%s\")", host_and_ident(FALSE), cmd_buffer); done = 1; } break; } /* If sender_host_unknown is true, we have got here via the -bs interface, not called from inetd. Otherwise, we are running an IP connection and the host address will be set. If the helo name is the primary name of this host and we haven't done a reverse lookup, force one now. If helo_required is set, ensure that the HELO name matches the actual host. If helo_verify is set, do the same check, but softly. */ if (!sender_host_unknown) { BOOL old_helo_verified = helo_verified; uschar *p = smtp_data; while (*p != 0 && !isspace(*p)) { *p = tolower(*p); p++; } *p = 0; /* Force a reverse lookup if HELO quoted something in helo_lookup_domains because otherwise the log can be confusing. */ if (sender_host_name == NULL && (deliver_domain = sender_helo_name, /* set $domain */ match_isinlist(sender_helo_name, &helo_lookup_domains, 0, &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) == OK) (void)host_name_lookup(); /* Rebuild the fullhost info to include the HELO name (and the real name if it was looked up.) */ host_build_sender_fullhost(); /* Rebuild */ set_process_info("handling%s incoming connection from %s", (tls_active >= 0)? " TLS" : "", host_and_ident(FALSE)); /* Verify if configured. This doesn't give much security, but it does make some people happy to be able to do it. Note that HELO is legitimately allowed to quote an address literal. Allow for IPv6 ::ffff: literals. */ helo_verified = FALSE; if (helo_required || helo_verify) { BOOL tempfail = FALSE; HDEBUG(D_receive) debug_printf("verifying %s %s\n", hello, sender_helo_name); if (sender_helo_name[0] == '[') { helo_verified = Ustrncmp(sender_helo_name+1, sender_host_address, Ustrlen(sender_host_address)) == 0; #if HAVE_IPV6 if (!helo_verified) { if (strncmpic(sender_host_address, US"::ffff:", 7) == 0) helo_verified = Ustrncmp(sender_helo_name + 1, sender_host_address + 7, Ustrlen(sender_host_address) - 7) == 0; } #endif HDEBUG(D_receive) { if (helo_verified) debug_printf("matched host address\n"); } } /* Do a reverse lookup if one hasn't already given a positive or negative response. If that fails, or the name doesn't match, try checking with a forward lookup. */ else { if (sender_host_name == NULL && !host_lookup_failed) tempfail = host_name_lookup() == DEFER; /* If a host name is known, check it and all its aliases. */ if (sender_host_name != NULL) { helo_verified = strcmpic(sender_host_name, sender_helo_name) == 0; if (helo_verified) { HDEBUG(D_receive) debug_printf("matched host name\n"); } else { uschar **aliases = sender_host_aliases; while (*aliases != NULL) { helo_verified = strcmpic(*aliases++, sender_helo_name) == 0; if (helo_verified) break; } HDEBUG(D_receive) { if (helo_verified) debug_printf("matched alias %s\n", *(--aliases)); } } } /* Final attempt: try a forward lookup of the helo name */ if (!helo_verified) { int rc; host_item h; h.name = sender_helo_name; h.address = NULL; h.mx = MX_NONE; h.next = NULL; HDEBUG(D_receive) debug_printf("getting IP address for %s\n", sender_helo_name); rc = host_find_byname(&h, NULL, NULL, TRUE); if (rc == HOST_FOUND || rc == HOST_FOUND_LOCAL) { host_item *hh = &h; while (hh != NULL) { if (Ustrcmp(hh->address, sender_host_address) == 0) { helo_verified = TRUE; HDEBUG(D_receive) debug_printf("IP address for %s matches calling address\n", sender_helo_name); break; } hh = hh->next; } } } } /* Verification failed. A temporary lookup failure gives a temporary error. */ if (!helo_verified) { if (helo_required) { smtp_printf("%d %s argument does not match calling host\r\n", tempfail? 451 : 550, hello); log_write(0, LOG_MAIN|LOG_REJECT, "%srejected \"%s %s\" from %s", tempfail? "temporarily " : "", hello, sender_helo_name, host_and_ident(FALSE)); helo_verified = old_helo_verified; break; /* End of HELO/EHLO processing */ } HDEBUG(D_all) debug_printf("%s verification failed but host is in " "helo_try_verify_hosts\n", hello); } } } #ifdef EXPERIMENTAL_SPF /* set up SPF context */ spf_init(sender_helo_name, sender_host_address); #endif /* Apply an ACL check if one is defined */ if (acl_smtp_helo != NULL) { rc = acl_check(ACL_WHERE_HELO, smtp_data, acl_smtp_helo, &user_msg, &log_msg); if (rc != OK) { done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg); sender_helo_name = NULL; host_build_sender_fullhost(); /* Rebuild */ break; } } /* The EHLO/HELO command is acceptable. Reset the protocol and the state, abandoning any previous message. */ received_protocol = (esmtp? protocols[pextend + ((sender_host_authenticated != NULL)? pauthed : 0) + ((tls_active >= 0)? pcrpted : 0)] : protocols[pnormal + ((tls_active >= 0)? pcrpted : 0)]) + ((sender_host_address != NULL)? pnlocal : 0); smtp_reset(reset_point); toomany = FALSE; /* Generate an OK reply, including the ident if present, and also the IP address if present. Reflecting back the ident is intended as a deterrent to mail forgers. For maximum efficiency, and also because some broken systems expect each response to be in a single packet, arrange that it is sent in one write(). */ auth_advertised = FALSE; pipelining_advertised = FALSE; #ifdef SUPPORT_TLS tls_advertised = FALSE; #endif s = string_sprintf("250 %s Hello %s%s%s", smtp_active_hostname, (sender_ident == NULL)? US"" : sender_ident, (sender_ident == NULL)? US"" : US" at ", (sender_host_name == NULL)? sender_helo_name : sender_host_name); ptr = Ustrlen(s); size = ptr + 1; if (sender_host_address != NULL) { s = string_cat(s, &size, &ptr, US" [", 2); s = string_cat(s, &size, &ptr, sender_host_address, Ustrlen(sender_host_address)); s = string_cat(s, &size, &ptr, US"]", 1); } s = string_cat(s, &size, &ptr, US"\r\n", 2); /* If we received EHLO, we must create a multiline response which includes the functions supported. */ if (esmtp) { s[3] = '-'; /* I'm not entirely happy with this, as an MTA is supposed to check that it has enough room to accept a message of maximum size before it sends this. However, there seems little point in not sending it. The actual size check happens later at MAIL FROM time. By postponing it till then, VRFY and EXPN can be used after EHLO when space is short. */ if (thismessage_size_limit > 0) { sprintf(CS big_buffer, "250-SIZE %d\r\n", thismessage_size_limit); s = string_cat(s, &size, &ptr, big_buffer, Ustrlen(big_buffer)); } else { s = string_cat(s, &size, &ptr, US"250-SIZE\r\n", 10); } /* Exim does not do protocol conversion or data conversion. It is 8-bit clean; if it has an 8-bit character in its hand, it just sends it. It cannot therefore specify 8BITMIME and remain consistent with the RFCs. However, some users want this option simply in order to stop MUAs mangling messages that contain top-bit-set characters. It is therefore provided as an option. */ if (accept_8bitmime) s = string_cat(s, &size, &ptr, US"250-8BITMIME\r\n", 14); /* Advertise ETRN if there's an ACL checking whether a host is permitted to issue it; a check is made when any host actually tries. */ if (acl_smtp_etrn != NULL) { s = string_cat(s, &size, &ptr, US"250-ETRN\r\n", 10); } /* Advertise EXPN if there's an ACL checking whether a host is permitted to issue it; a check is made when any host actually tries. */ if (acl_smtp_expn != NULL) { s = string_cat(s, &size, &ptr, US"250-EXPN\r\n", 10); } /* Exim is quite happy with pipelining, so let the other end know that it is safe to use it, unless advertising is disabled. */ if (verify_check_host(&pipelining_advertise_hosts) == OK) { s = string_cat(s, &size, &ptr, US"250-PIPELINING\r\n", 16); sync_cmd_limit = NON_SYNC_CMD_PIPELINING; pipelining_advertised = TRUE; } /* If any server authentication mechanisms are configured, advertise them if the current host is in auth_advertise_hosts. The problem with advertising always is that some clients then require users to authenticate (and aren't configurable otherwise) even though it may not be necessary (e.g. if the host is in host_accept_relay). RFC 2222 states that SASL mechanism names contain only upper case letters, so output the names in upper case, though we actually recognize them in either case in the AUTH command. */ if (auths != NULL) { if (verify_check_host(&auth_advertise_hosts) == OK) { auth_instance *au; BOOL first = TRUE; for (au = auths; au != NULL; au = au->next) { if (au->server && (au->advertise_condition == NULL || expand_check_condition(au->advertise_condition, au->name, US"authenticator"))) { int saveptr; if (first) { s = string_cat(s, &size, &ptr, US"250-AUTH", 8); first = FALSE; auth_advertised = TRUE; } saveptr = ptr; s = string_cat(s, &size, &ptr, US" ", 1); s = string_cat(s, &size, &ptr, au->public_name, Ustrlen(au->public_name)); while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]); au->advertised = TRUE; } else au->advertised = FALSE; } if (!first) s = string_cat(s, &size, &ptr, US"\r\n", 2); } } /* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer) if it has been included in the binary, and the host matches tls_advertise_hosts. We must *not* advertise if we are already in a secure connection. */ #ifdef SUPPORT_TLS if (tls_active < 0 && verify_check_host(&tls_advertise_hosts) != FAIL) { s = string_cat(s, &size, &ptr, US"250-STARTTLS\r\n", 14); tls_advertised = TRUE; } #endif /* Finish off the multiline reply with one that is always available. */ s = string_cat(s, &size, &ptr, US"250 HELP\r\n", 10); } /* Terminate the string (for debug), write it, and note that HELO/EHLO has been seen. */ s[ptr] = 0; #ifdef SUPPORT_TLS if (tls_active >= 0) (void)tls_write(s, ptr); else #endif fwrite(s, 1, ptr, smtp_out); DEBUG(D_receive) debug_printf("SMTP>> %s", s); helo_seen = TRUE; break; /* HELO/EHLO */ /* The MAIL command requires an address as an operand. All we do here is to parse it for syntactic correctness. The form "<>" is a special case which converts into an empty string. The start/end pointers in the original are not used further for this address, as it is the canonical extracted address which is all that is kept. */ case MAIL_CMD: smtp_mailcmd_count++; /* Count for limit and ratelimit */ was_rej_mail = TRUE; /* Reset if accepted */ if (helo_required && !helo_seen) { smtp_printf("503 HELO or EHLO required\r\n"); log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL from %s: no " "HELO/EHLO given", host_and_ident(FALSE)); break; } if (sender_address != NULL) { done = synprot_error(L_smtp_protocol_error, 503, NULL, US"sender already given"); break; } if (smtp_data[0] == 0) { done = synprot_error(L_smtp_protocol_error, 501, NULL, US"MAIL must have an address operand"); break; } /* Check to see if the limit for messages per connection would be exceeded by accepting further messages. */ if (smtp_accept_max_per_connection > 0 && smtp_mailcmd_count > smtp_accept_max_per_connection) { smtp_printf("421 too many messages in this connection\r\n"); log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL command %s: too many " "messages in one connection", host_and_ident(TRUE)); break; } /* Reset for start of message - even if this is going to fail, we obviously need to throw away any previous data. */ smtp_reset(reset_point); toomany = FALSE; sender_data = recipient_data = NULL; /* Loop, checking for ESMTP additions to the MAIL FROM command. */ if (esmtp) for(;;) { uschar *name, *value, *end; unsigned long int size; if (!extract_option(&name, &value)) break; /* Handle SIZE= by reading the value. We don't do the check till later, in order to be able to log the sender address on failure. */ if (strcmpic(name, US"SIZE") == 0 && ((size = (int)Ustrtoul(value, &end, 10)), *end == 0)) { if ((size == ULONG_MAX && errno == ERANGE) || size > INT_MAX) size = INT_MAX; message_size = (int)size; } /* If this session was initiated with EHLO and accept_8bitmime is set, Exim will have indicated that it supports the BODY=8BITMIME option. In fact, it does not support this according to the RFCs, in that it does not take any special action for forwarding messages containing 8-bit characters. That is why accept_8bitmime is not the default setting, but some sites want the action that is provided. We recognize both "8BITMIME" and "7BIT" as body types, but take no action. */ else if (accept_8bitmime && strcmpic(name, US"BODY") == 0 && (strcmpic(value, US"8BITMIME") == 0 || strcmpic(value, US"7BIT") == 0)) {} /* Handle the AUTH extension. If the value given is not "<>" and either the ACL says "yes" or there is no ACL but the sending host is authenticated, we set it up as the authenticated sender. However, if the authenticator set a condition to be tested, we ignore AUTH on MAIL unless the condition is met. The value of AUTH is an xtext, which means that +, = and cntrl chars are coded in hex; however "<>" is unaffected by this coding. */ else if (strcmpic(name, US"AUTH") == 0) { if (Ustrcmp(value, "<>") != 0) { int rc; uschar *ignore_msg; if (auth_xtextdecode(value, &authenticated_sender) < 0) { /* Put back terminator overrides for error message */ name[-1] = ' '; value[-1] = '='; done = synprot_error(L_smtp_syntax_error, 501, NULL, US"invalid data for AUTH"); goto COMMAND_LOOP; } if (acl_smtp_mailauth == NULL) { ignore_msg = US"client not authenticated"; rc = (sender_host_authenticated != NULL)? OK : FAIL; } else { ignore_msg = US"rejected by ACL"; rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth, &user_msg, &log_msg); } switch (rc) { case OK: if (authenticated_by == NULL || authenticated_by->mail_auth_condition == NULL || expand_check_condition(authenticated_by->mail_auth_condition, authenticated_by->name, US"authenticator")) break; /* Accept the AUTH */ ignore_msg = US"server_mail_auth_condition failed"; if (authenticated_id != NULL) ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"", ignore_msg, authenticated_id); /* Fall through */ case FAIL: authenticated_sender = NULL; log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)", value, host_and_ident(TRUE), ignore_msg); break; /* Should only get DEFER or ERROR here. Put back terminator overrides for error message */ default: name[-1] = ' '; value[-1] = '='; (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg, log_msg); goto COMMAND_LOOP; } } } /* Unknown option. Stick back the terminator characters and break the loop. An error for a malformed address will occur. */ else { name[-1] = ' '; value[-1] = '='; break; } } /* If we have passed the threshold for rate limiting, apply the current delay, and update it for next time, provided this is a limited host. */ if (smtp_mailcmd_count > smtp_rlm_threshold && verify_check_host(&smtp_ratelimit_hosts) == OK) { DEBUG(D_receive) debug_printf("rate limit MAIL: delay %.3g sec\n", smtp_delay_mail/1000.0); millisleep((int)smtp_delay_mail); smtp_delay_mail *= smtp_rlm_factor; if (smtp_delay_mail > (double)smtp_rlm_limit) smtp_delay_mail = (double)smtp_rlm_limit; } /* Now extract the address, first applying any SMTP-time rewriting. The TRUE flag allows "<>" as a sender address. */ raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)? rewrite_one(smtp_data, rewrite_smtp, NULL, FALSE, US"", global_rewrite_rules) : smtp_data; /* rfc821_domains = TRUE; << no longer needed */ raw_sender = parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain, TRUE); /* rfc821_domains = FALSE; << no longer needed */ if (raw_sender == NULL) { done = synprot_error(L_smtp_syntax_error, 501, smtp_data, errmess); break; } sender_address = raw_sender; /* If there is a configured size limit for mail, check that this message doesn't exceed it. The check is postponed to this point so that the sender can be logged. */ if (thismessage_size_limit > 0 && message_size > thismessage_size_limit) { smtp_printf("552 Message size exceeds maximum permitted\r\n"); log_write(L_size_reject, LOG_MAIN|LOG_REJECT, "rejected MAIL FROM:<%s> %s: " "message too big: size%s=%d max=%d", sender_address, host_and_ident(TRUE), (message_size == INT_MAX)? ">" : "", message_size, thismessage_size_limit); sender_address = NULL; break; } /* Check there is enough space on the disk unless configured not to. When smtp_check_spool_space is set, the check is for thismessage_size_limit plus the current message - i.e. we accept the message only if it won't reduce the space below the threshold. Add 5000 to the size to allow for overheads such as the Received: line and storing of recipients, etc. By putting the check here, even when SIZE is not given, it allow VRFY and EXPN etc. to be used when space is short. */ if (!receive_check_fs( (smtp_check_spool_space && message_size >= 0)? message_size + 5000 : 0)) { smtp_printf("452 Space shortage, please try later\r\n"); sender_address = NULL; break; } /* If sender_address is unqualified, reject it, unless this is a locally generated message, or the sending host or net is permitted to send unqualified addresses - typically local machines behaving as MUAs - in which case just qualify the address. The flag is set above at the start of the SMTP connection. */ if (sender_domain == 0 && sender_address[0] != 0) { if (allow_unqualified_sender) { sender_domain = Ustrlen(sender_address) + 1; sender_address = rewrite_address_qualify(sender_address, FALSE); DEBUG(D_receive) debug_printf("unqualified address %s accepted\n", raw_sender); } else { smtp_printf("501 %s: sender address must contain a domain\r\n", smtp_data); log_write(L_smtp_syntax_error, LOG_MAIN|LOG_REJECT, "unqualified sender rejected: <%s> %s%s", raw_sender, host_and_ident(TRUE), host_lookup_msg); sender_address = NULL; break; } } /* Apply an ACL check if one is defined, before responding */ rc = (acl_smtp_mail == NULL)? OK : acl_check(ACL_WHERE_MAIL, NULL, acl_smtp_mail, &user_msg, &log_msg); if (rc == OK || rc == DISCARD) { smtp_printf("250 OK\r\n"); smtp_delay_rcpt = smtp_rlr_base; recipients_discarded = (rc == DISCARD); was_rej_mail = FALSE; } else { done = smtp_handle_acl_fail(ACL_WHERE_MAIL, rc, user_msg, log_msg); sender_address = NULL; } break; /* The RCPT command requires an address as an operand. All we do here is to parse it for syntactic correctness. There may be any number of RCPT commands, specifying multiple senders. We build them all into a data structure that is in argc/argv format. The start/end values given by parse_extract_address are not used, as we keep only the extracted address. */ case RCPT_CMD: rcpt_count++; was_rcpt = TRUE; /* There must be a sender address; if the sender was rejected and pipelining was advertised, we assume the client was pipelining, and do not count this as a protocol error. Reset was_rej_mail so that further RCPTs get the same treatment. */ if (sender_address == NULL) { if (pipelining_advertised && last_was_rej_mail) { smtp_printf("503 sender not yet given\r\n"); was_rej_mail = TRUE; } else { done = synprot_error(L_smtp_protocol_error, 503, NULL, US"sender not yet given"); was_rcpt = FALSE; /* Not a valid RCPT */ } rcpt_fail_count++; break; } /* Check for an operand */ if (smtp_data[0] == 0) { done = synprot_error(L_smtp_syntax_error, 501, NULL, US"RCPT must have an address operand"); rcpt_fail_count++; break; } /* Apply SMTP rewriting then extract the working address. Don't allow "<>" as a recipient address */ recipient = ((rewrite_existflags & rewrite_smtp) != 0)? rewrite_one(smtp_data, rewrite_smtp, NULL, FALSE, US"", global_rewrite_rules) : smtp_data; /* rfc821_domains = TRUE; << no longer needed */ recipient = parse_extract_address(recipient, &errmess, &start, &end, &recipient_domain, FALSE); /* rfc821_domains = FALSE; << no longer needed */ if (recipient == NULL) { done = synprot_error(L_smtp_syntax_error, 501, smtp_data, errmess); rcpt_fail_count++; break; } /* If the recipient address is unqualified, reject it, unless this is a locally generated message. However, unqualified addresses are permitted from a configured list of hosts and nets - typically when behaving as MUAs rather than MTAs. Sad that SMTP is used for both types of traffic, really. The flag is set at the start of the SMTP connection. RFC 1123 talks about supporting "the reserved mailbox postmaster"; I always assumed this meant "reserved local part", but the revision of RFC 821 and friends now makes it absolutely clear that it means *mailbox*. Consequently we must always qualify this address, regardless. */ if (recipient_domain == 0) { if (allow_unqualified_recipient || strcmpic(recipient, US"postmaster") == 0) { DEBUG(D_receive) debug_printf("unqualified address %s accepted\n", recipient); recipient_domain = Ustrlen(recipient) + 1; recipient = rewrite_address_qualify(recipient, TRUE); } else { rcpt_fail_count++; smtp_printf("501 %s: recipient address must contain a domain\r\n", smtp_data); log_write(L_smtp_syntax_error, LOG_MAIN|LOG_REJECT, "unqualified recipient rejected: " "<%s> %s%s", recipient, host_and_ident(TRUE), host_lookup_msg); break; } } /* Check maximum allowed */ if (rcpt_count > recipients_max && recipients_max > 0) { if (recipients_max_reject) { rcpt_fail_count++; smtp_printf("552 too many recipients\r\n"); if (!toomany) log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: message " "rejected: sender=<%s> %s", sender_address, host_and_ident(TRUE)); } else { rcpt_defer_count++; smtp_printf("452 too many recipients\r\n"); if (!toomany) log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: excess " "temporarily rejected: sender=<%s> %s", sender_address, host_and_ident(TRUE)); } toomany = TRUE; break; } /* If we have passed the threshold for rate limiting, apply the current delay, and update it for next time, provided this is a limited host. */ if (rcpt_count > smtp_rlr_threshold && verify_check_host(&smtp_ratelimit_hosts) == OK) { DEBUG(D_receive) debug_printf("rate limit RCPT: delay %.3g sec\n", smtp_delay_rcpt/1000.0); millisleep((int)smtp_delay_rcpt); smtp_delay_rcpt *= smtp_rlr_factor; if (smtp_delay_rcpt > (double)smtp_rlr_limit) smtp_delay_rcpt = (double)smtp_rlr_limit; } /* If the MAIL ACL discarded all the recipients, we bypass ACL checking for them. Otherwise, check the access control list for this recipient. */ rc = recipients_discarded? DISCARD : acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg, &log_msg); /* The ACL was happy */ if (rc == OK) { smtp_printf("250 Accepted\r\n"); receive_add_recipient(recipient, -1); } /* The recipient was discarded */ else if (rc == DISCARD) { smtp_printf("250 Accepted\r\n"); rcpt_fail_count++; discarded = TRUE; log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> rejected RCPT %s: " "discarded by %s ACL%s%s", host_and_ident(TRUE), (sender_address_unrewritten != NULL)? sender_address_unrewritten : sender_address, smtp_data, recipients_discarded? "MAIL" : "RCPT", (log_msg == NULL)? US"" : US": ", (log_msg == NULL)? US"" : log_msg); } /* Either the ACL failed the address, or it was deferred. */ else { if (rc == FAIL) rcpt_fail_count++; else rcpt_defer_count++; done = smtp_handle_acl_fail(ACL_WHERE_RCPT, rc, user_msg, log_msg); } break; /* The DATA command is legal only if it follows successful MAIL FROM and RCPT TO commands. However, if pipelining is advertised, a bad DATA is not counted as a protocol error if it follows RCPT (which must have been rejected if there are no recipients.) This function is complete when a valid DATA command is encountered. Note concerning the code used: RFC 2821 says this: - If there was no MAIL, or no RCPT, command, or all such commands were rejected, the server MAY return a "command out of sequence" (503) or "no valid recipients" (554) reply in response to the DATA command. The example in the pipelining RFC 2920 uses 554, but I use 503 here because it is the same whether pipelining is in use or not. */ case DATA_CMD: if (!discarded && recipients_count <= 0) { if (pipelining_advertised && last_was_rcpt) smtp_printf("503 valid RCPT command must precede DATA\r\n"); else done = synprot_error(L_smtp_protocol_error, 503, NULL, US"valid RCPT command must precede DATA"); break; } if (toomany && recipients_max_reject) { sender_address = NULL; /* This will allow a new MAIL without RSET */ sender_address_unrewritten = NULL; smtp_printf("554 Too many recipients\r\n"); break; } if (acl_smtp_predata == NULL) rc = OK; else { enable_dollar_recipients = TRUE; rc = acl_check(ACL_WHERE_PREDATA, NULL, acl_smtp_predata, &user_msg, &log_msg); enable_dollar_recipients = FALSE; } if (rc == OK) { smtp_printf("354 Enter message, ending with \".\" on a line by itself\r\n"); done = 3; message_ended = END_NOTENDED; /* Indicate in middle of data */ } /* Either the ACL failed the address, or it was deferred. */ else done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg); break; case VRFY_CMD: rc = acl_check(ACL_WHERE_VRFY, smtp_data, acl_smtp_vrfy, &user_msg, &log_msg); if (rc != OK) done = smtp_handle_acl_fail(ACL_WHERE_VRFY, rc, user_msg, log_msg); else { uschar *address; uschar *s = NULL; /* rfc821_domains = TRUE; << no longer needed */ address = parse_extract_address(smtp_data, &errmess, &start, &end, &recipient_domain, FALSE); /* rfc821_domains = FALSE; << no longer needed */ if (address == NULL) s = string_sprintf("501 %s", errmess); else { address_item *addr = deliver_make_addr(address, FALSE); switch(verify_address(addr, NULL, vopt_is_recipient | vopt_qualify, -1, -1, -1, NULL, NULL, NULL)) { case OK: s = string_sprintf("250 <%s> is deliverable", address); break; case DEFER: s = (addr->message != NULL)? string_sprintf("451 <%s> %s", address, addr->message) : string_sprintf("451 Cannot resolve <%s> at this time", address); break; case FAIL: s = (addr->message != NULL)? string_sprintf("550 <%s> %s", address, addr->message) : string_sprintf("550 <%s> is not deliverable", address); log_write(0, LOG_MAIN, "VRFY failed for %s %s", smtp_data, host_and_ident(TRUE)); break; } } smtp_printf("%s\r\n", s); } break; case EXPN_CMD: rc = acl_check(ACL_WHERE_EXPN, smtp_data, acl_smtp_expn, &user_msg, &log_msg); if (rc != OK) done = smtp_handle_acl_fail(ACL_WHERE_EXPN, rc, user_msg, log_msg); else { BOOL save_log_testing_mode = log_testing_mode; address_test_mode = log_testing_mode = TRUE; (void) verify_address(deliver_make_addr(smtp_data, FALSE), smtp_out, vopt_is_recipient | vopt_qualify | vopt_expn, -1, -1, -1, NULL, NULL, NULL); address_test_mode = FALSE; log_testing_mode = save_log_testing_mode; /* true for -bh */ } break; #ifdef SUPPORT_TLS case STARTTLS_CMD: if (!tls_advertised) { done = synprot_error(L_smtp_protocol_error, 503, NULL, US"STARTTLS command used when not advertised"); break; } /* Apply an ACL check if one is defined */ if (acl_smtp_starttls != NULL) { rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls, &user_msg, &log_msg); if (rc != OK) { done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg); break; } } /* RFC 2487 is not clear on when this command may be sent, though it does state that all information previously obtained from the client must be discarded if a TLS session is started. It seems reasonble to do an implied RSET when STARTTLS is received. */ incomplete_transaction_log(US"STARTTLS"); smtp_reset(reset_point); toomany = FALSE; cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = FALSE; /* Attempt to start up a TLS session, and if successful, discard all knowledge that was obtained previously. At least, that's what the RFC says, and that's what happens by default. However, in order to work round YAEB, there is an option to remember the esmtp state. Sigh. We must allow for an extra EHLO command and an extra AUTH command after STARTTLS that don't add to the nonmail command count. */ if ((rc = tls_server_start(tls_require_ciphers)) == OK) { if (!tls_remember_esmtp) helo_seen = esmtp = auth_advertised = pipelining_advertised = FALSE; cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE; cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE; if (sender_helo_name != NULL) { store_free(sender_helo_name); sender_helo_name = NULL; host_build_sender_fullhost(); /* Rebuild */ set_process_info("handling incoming TLS connection from %s", host_and_ident(FALSE)); } received_protocol = (esmtp? protocols[pextend + pcrpted + ((sender_host_authenticated != NULL)? pauthed : 0)] : protocols[pnormal + pcrpted]) + ((sender_host_address != NULL)? pnlocal : 0); sender_host_authenticated = NULL; authenticated_id = NULL; sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING; DEBUG(D_tls) debug_printf("TLS active\n"); break; /* Successful STARTTLS */ } /* Some local configuration problem was discovered before actually trying to do a TLS handshake; give a temporary error. */ else if (rc == DEFER) { smtp_printf("454 TLS currently unavailable\r\n"); break; } /* Hard failure. Reject everything except QUIT or closed connection. One cause for failure is a nested STARTTLS, in which case tls_active remains set, but we must still reject all incoming commands. */ DEBUG(D_tls) debug_printf("TLS failed to start\n"); while (done <= 0) { switch(smtp_read_command(FALSE)) { case EOF_CMD: log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF", smtp_get_connection_info()); done = 2; break; case QUIT_CMD: smtp_printf("221 %s closing connection\r\n", smtp_active_hostname); log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT", smtp_get_connection_info()); done = 2; break; default: smtp_printf("554 Security failure\r\n"); break; } } tls_close(TRUE); break; #endif /* The ACL for QUIT is provided for gathering statistical information or similar; it does not affect the response code, but it can supply a custom message. */ case QUIT_CMD: incomplete_transaction_log(US"QUIT"); if (acl_smtp_quit != NULL) { rc = acl_check(ACL_WHERE_QUIT, US"", acl_smtp_quit,&user_msg,&log_msg); if (rc == ERROR) log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s", log_msg); } else user_msg = NULL; if (user_msg == NULL) smtp_printf("221 %s closing connection\r\n", smtp_active_hostname); else smtp_printf("221 %s\r\n", user_msg); #ifdef SUPPORT_TLS tls_close(TRUE); #endif done = 2; log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT", smtp_get_connection_info()); break; case RSET_CMD: incomplete_transaction_log(US"RSET"); smtp_reset(reset_point); toomany = FALSE; smtp_printf("250 Reset OK\r\n"); cmd_list[CMD_LIST_RSET].is_mail_cmd = FALSE; break; case NOOP_CMD: smtp_printf("250 OK\r\n"); break; /* Show ETRN/EXPN/VRFY if there's an ACL for checking hosts; if actually used, a check will be done for permitted hosts. */ case HELP_CMD: smtp_printf("214-Commands supported:\r\n"); { uschar buffer[256]; buffer[0] = 0; Ustrcat(buffer, " AUTH"); #ifdef SUPPORT_TLS Ustrcat(buffer, " STARTTLS"); #endif Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA"); Ustrcat(buffer, " NOOP QUIT RSET HELP"); if (acl_smtp_etrn != NULL) Ustrcat(buffer, " ETRN"); if (acl_smtp_expn != NULL) Ustrcat(buffer, " EXPN"); if (acl_smtp_vrfy != NULL) Ustrcat(buffer, " VRFY"); smtp_printf("214%s\r\n", buffer); } break; case EOF_CMD: incomplete_transaction_log(US"connection lost"); smtp_printf("421 %s lost input connection\r\n", smtp_active_hostname); /* Don't log by default unless in the middle of a message, as some mailers just drop the call rather than sending QUIT, and it clutters up the logs. */ if (sender_address != NULL || recipients_count > 0) log_write(L_lost_incoming_connection, LOG_MAIN, "unexpected %s while reading SMTP command from %s%s", sender_host_unknown? "EOF" : "disconnection", host_and_ident(FALSE), smtp_read_error); else log_write(L_smtp_connection, LOG_MAIN, "%s lost%s", smtp_get_connection_info(), smtp_read_error); done = 1; break; case ETRN_CMD: if (sender_address != NULL) { done = synprot_error(L_smtp_protocol_error, 503, NULL, US"ETRN is not permitted inside a transaction"); break; } log_write(L_etrn, LOG_MAIN, "ETRN %s received from %s", smtp_data, host_and_ident(FALSE)); rc = acl_check(ACL_WHERE_ETRN, smtp_data, acl_smtp_etrn, &user_msg, &log_msg); if (rc != OK) { done = smtp_handle_acl_fail(ACL_WHERE_ETRN, rc, user_msg, log_msg); break; } /* Compute the serialization key for this command. */ etrn_serialize_key = string_sprintf("etrn-%s\n", smtp_data); /* If a command has been specified for running as a result of ETRN, we permit any argument to ETRN. If not, only the # standard form is permitted, since that is strictly the only kind of ETRN that can be implemented according to the RFC. */ if (smtp_etrn_command != NULL) { uschar *error; BOOL rc; etrn_command = smtp_etrn_command; deliver_domain = smtp_data; rc = transport_set_up_command(&argv, smtp_etrn_command, TRUE, 0, NULL, US"ETRN processing", &error); deliver_domain = NULL; if (!rc) { log_write(0, LOG_MAIN|LOG_PANIC, "failed to set up ETRN command: %s", error); smtp_printf("458 Internal failure\r\n"); break; } } /* Else set up to call Exim with the -R option. */ else { if (*smtp_data++ != '#') { done = synprot_error(L_smtp_syntax_error, 501, NULL, US"argument must begin with #"); break; } etrn_command = US"exim -R"; argv = child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R", smtp_data); } /* If we are host-testing, don't actually do anything. */ if (host_checking) { HDEBUG(D_any) { debug_printf("ETRN command is: %s\n", etrn_command); debug_printf("ETRN command execution skipped\n"); } smtp_printf("250 OK\r\n"); break; } /* If ETRN queue runs are to be serialized, check the database to ensure one isn't already running. */ if (smtp_etrn_serialize && !enq_start(etrn_serialize_key)) { smtp_printf("458 Already processing %s\r\n", smtp_data); break; } /* Fork a child process and run the command. We don't want to have to wait for the process at any point, so set SIGCHLD to SIG_IGN before forking. It should be set that way anyway for external incoming SMTP, but we save and restore to be tidy. If serialization is required, we actually run the command in yet another process, so we can wait for it to complete and then remove the serialization lock. */ oldsignal = signal(SIGCHLD, SIG_IGN); if ((pid = fork()) == 0) { smtp_input = FALSE; /* This process is not associated with the */ fclose(smtp_in); /* SMTP call any more. */ fclose(smtp_out); signal(SIGCHLD, SIG_DFL); /* Want to catch child */ /* If not serializing, do the exec right away. Otherwise, fork down into another process. */ if (!smtp_etrn_serialize || (pid = fork()) == 0) { DEBUG(D_exec) debug_print_argv(argv); exim_nullstd(); /* Ensure std{in,out,err} exist */ execv(CS argv[0], (char *const *)argv); log_write(0, LOG_MAIN|LOG_PANIC_DIE, "exec of \"%s\" (ETRN) failed: %s", etrn_command, strerror(errno)); _exit(EXIT_FAILURE); /* paranoia */ } /* Obey this if smtp_serialize and the 2nd fork yielded non-zero. That is, we are in the first subprocess, after forking again. All we can do for a failing fork is to log it. Otherwise, wait for the 2nd process to complete, before removing the serialization. */ if (pid < 0) log_write(0, LOG_MAIN|LOG_PANIC, "2nd fork for serialized ETRN " "failed: %s", strerror(errno)); else { int status; DEBUG(D_any) debug_printf("waiting for serialized ETRN process %d\n", (int)pid); (void)wait(&status); DEBUG(D_any) debug_printf("serialized ETRN process %d ended\n", (int)pid); } enq_end(etrn_serialize_key); _exit(EXIT_SUCCESS); } /* Back in the top level SMTP process. Check that we started a subprocess and restore the signal state. */ if (pid < 0) { log_write(0, LOG_MAIN|LOG_PANIC, "fork of process for ETRN failed: %s", strerror(errno)); smtp_printf("458 Unable to fork process\r\n"); if (smtp_etrn_serialize) enq_end(etrn_serialize_key); } else smtp_printf("250 OK\r\n"); signal(SIGCHLD, oldsignal); break; case BADARG_CMD: done = synprot_error(L_smtp_syntax_error, 501, NULL, US"unexpected argument data"); break; /* This currently happens only for NULLs, but could be extended. */ case BADCHAR_CMD: done = synprot_error(L_smtp_syntax_error, 0, NULL, /* Just logs */ US"NULL character(s) present (shown as '?')"); smtp_printf("501 NULL characters are not allowed in SMTP commands\r\n"); break; case BADSYN_CMD: if (smtp_inend >= smtp_inbuffer + in_buffer_size) smtp_inend = smtp_inbuffer + in_buffer_size - 1; c = smtp_inend - smtp_inptr; if (c > 150) c = 150; smtp_inptr[c] = 0; incomplete_transaction_log(US"sync failure"); log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol violation: " "synchronization error " "(next input sent too soon: pipelining was%s advertised): " "rejected \"%s\" %s next input=\"%s\"", pipelining_advertised? "" : " not", cmd_buffer, host_and_ident(TRUE), string_printing(smtp_inptr)); smtp_printf("554 SMTP synchronization error\r\n"); done = 1; /* Pretend eof - drops connection */ break; case TOO_MANY_NONMAIL_CMD: incomplete_transaction_log(US"too many non-mail commands"); log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many " "nonmail commands (last was \"%.*s\")", host_and_ident(FALSE), smtp_data - cmd_buffer, cmd_buffer); smtp_printf("554 Too many nonmail commands\r\n"); done = 1; /* Pretend eof - drops connection */ break; default: if (unknown_command_count++ >= smtp_max_unknown_commands) { log_write(L_smtp_syntax_error, LOG_MAIN, "SMTP syntax error in \"%s\" %s %s", string_printing(cmd_buffer), host_and_ident(TRUE), US"unrecognized command"); incomplete_transaction_log(US"unrecognized command"); smtp_printf("500 Too many unrecognized commands\r\n"); done = 2; log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many " "unrecognized commands (last was \"%s\")", host_and_ident(FALSE), cmd_buffer); } else done = synprot_error(L_smtp_syntax_error, 500, NULL, US"unrecognized command"); break; } /* This label is used by goto's inside loops that want to break out to the end of the command-processing loop. */ COMMAND_LOOP: last_was_rej_mail = was_rej_mail; /* Remember some last commands for */ last_was_rcpt = was_rcpt; /* protocol error handling */ continue; } return done - 2; /* Convert yield values */ } /* End of smtp_in.c */